/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <svx/sidebar/AreaTransparencyGradientPopup.hxx>
#include <svx/sidebar/AreaPropertyPanelBase.hxx>
#include <svx/xflftrit.hxx>
namespace svx::sidebar {
AreaTransparencyGradientPopup::AreaTransparencyGradientPopup(const css::uno::Reference<css::frame::XFrame>& rFrame,
AreaPropertyPanelBase& rPanel, weld::Widget* pParent)
: WeldToolbarPopup(rFrame, pParent, u"svx/ui/floatingareastyle.ui"_ustr, u"FloatingAreaStyle"_ustr)
, mrAreaPropertyPanel(rPanel)
, mxCenterGrid(m_xBuilder->weld_widget(u"centergrid"_ustr))
, mxAngleGrid(m_xBuilder->weld_widget(u"anglegrid"_ustr))
, mxMtrTrgrCenterX(m_xBuilder->weld_metric_spin_button(u"centerx"_ustr, FieldUnit::PERCENT))
, mxMtrTrgrCenterY(m_xBuilder->weld_metric_spin_button(u"centery"_ustr, FieldUnit::PERCENT))
, mxMtrTrgrAngle(m_xBuilder->weld_metric_spin_button(u"angle"_ustr, FieldUnit::DEGREE))
, mxBtnLeft45(m_xBuilder->weld_toolbar(u"lefttoolbox"_ustr))
, mxBtnRight45(m_xBuilder->weld_toolbar(u"righttoolbox"_ustr))
, mxMtrTrgrStartValue(m_xBuilder->weld_metric_spin_button(u"start"_ustr, FieldUnit::PERCENT))
, mxMtrTrgrEndValue(m_xBuilder->weld_metric_spin_button(u"end"_ustr, FieldUnit::PERCENT))
, mxMtrTrgrBorder(m_xBuilder->weld_metric_spin_button(u"border"_ustr, FieldUnit::PERCENT))
{
Link<weld::MetricSpinButton&,void> aLink = LINK(this, AreaTransparencyGradientPopup, ModifiedTrgrHdl_Impl);
mxMtrTrgrCenterX->connect_value_changed(aLink);
mxMtrTrgrCenterY->connect_value_changed(aLink);
mxMtrTrgrAngle->connect_value_changed(aLink);
mxMtrTrgrBorder->connect_value_changed(aLink);
mxMtrTrgrStartValue->connect_value_changed(aLink);
mxMtrTrgrEndValue->connect_value_changed(aLink);
mxBtnLeft45->connect_clicked(LINK(this, AreaTransparencyGradientPopup, Left_Click45_Impl));
mxBtnRight45->connect_clicked(LINK(this, AreaTransparencyGradientPopup, Right_Click45_Impl));
}
AreaTransparencyGradientPopup::~AreaTransparencyGradientPopup()
{
}
void AreaTransparencyGradientPopup::InitStatus(XFillFloatTransparenceItem const * pGradientItem)
{
const basegfx::BGradient& rGradient = pGradientItem->GetGradientValue();
basegfx::BGradient aGradient;
Color aStart(rGradient.GetColorStops().front().getStopColor());
Color aEnd(rGradient.GetColorStops().back().getStopColor());
if (rGradient.GetXOffset() == AreaPropertyPanelBase::DEFAULT_CENTERX
&& rGradient.GetYOffset() == AreaPropertyPanelBase::DEFAULT_CENTERY
&& static_cast<sal_Int32>(toDegrees(rGradient.GetAngle())) == AreaPropertyPanelBase::DEFAULT_ANGLE
&& static_cast<sal_uInt16>(((static_cast<sal_uInt16>(aStart.GetRed()) + 1) * 100) / 255)
== AreaPropertyPanelBase::DEFAULT_STARTVALUE
&& static_cast<sal_uInt16>(((static_cast<sal_uInt16>(aEnd.GetRed()) + 1) * 100) / 255)
== AreaPropertyPanelBase::DEFAULT_ENDVALUE
&& rGradient.GetBorder() == AreaPropertyPanelBase::DEFAULT_BORDER)
{
aGradient = mrAreaPropertyPanel.GetGradient(rGradient.GetGradientStyle());
}
else
{
aGradient = rGradient;
}
mxMtrTrgrCenterX->set_value(aGradient.GetXOffset(), FieldUnit::PERCENT);
mxMtrTrgrCenterY->set_value(aGradient.GetYOffset(), FieldUnit::PERCENT);
mxMtrTrgrAngle->set_value(toDegrees(aGradient.GetAngle()), FieldUnit::DEGREE);
aStart = Color(aGradient.GetColorStops().front().getStopColor());
aEnd = Color(aGradient.GetColorStops().back().getStopColor());
mxMtrTrgrStartValue->set_value(static_cast<sal_uInt16>(((static_cast<sal_uInt16>(aStart.GetRed()) + 1) * 100) / 255), FieldUnit::PERCENT);
mxMtrTrgrEndValue->set_value(static_cast<sal_uInt16>(((static_cast<sal_uInt16>(aEnd.GetRed()) + 1) * 100) / 255), FieldUnit::PERCENT);
// MCGR: preserve ColorStops if given
// tdf#155901 We need offset of first and last stop, so include them.
if (aGradient.GetColorStops().size() >= 2)
maColorStops = aGradient.GetColorStops();
else
maColorStops.clear();
mxMtrTrgrBorder->set_value(aGradient.GetBorder(), FieldUnit::PERCENT);
}
void AreaTransparencyGradientPopup::Rearrange(XFillFloatTransparenceItem const * pGradientItem)
{
InitStatus(pGradientItem);
const basegfx::BGradient& rGradient = pGradientItem->GetGradientValue();
css::awt::GradientStyle eXGS(rGradient.GetGradientStyle());
switch(eXGS)
{
case css::awt::GradientStyle_LINEAR:
case css::awt::GradientStyle_AXIAL:
mxCenterGrid->hide();
mxAngleGrid->show();
break;
case css::awt::GradientStyle_RADIAL:
mxCenterGrid->show();
mxAngleGrid->hide();
break;
case css::awt::GradientStyle_ELLIPTICAL:
case css::awt::GradientStyle_SQUARE:
case css::awt::GradientStyle_RECT:
mxCenterGrid->show();
mxAngleGrid->show();
break;
default:
break;
}
}
void AreaTransparencyGradientPopup::ExecuteValueModify()
{
//Added
sal_Int16 aMtrValue = static_cast<sal_Int16>(mxMtrTrgrAngle->get_value(FieldUnit::DEGREE));
while(aMtrValue<0)
aMtrValue += 360;
sal_uInt16 nVal = aMtrValue/360;
nVal = aMtrValue - nVal*360;
mxMtrTrgrAngle->set_value(nVal, FieldUnit::DEGREE);
//End of new code
basegfx::BColorStops aColorStops;
basegfx::BColor aStartBColor(mxMtrTrgrStartValue->get_value(FieldUnit::PERCENT) / 100.0);
aStartBColor.clamp();
basegfx::BColor aEndBColor(mxMtrTrgrEndValue->get_value(FieldUnit::PERCENT) / 100.0);
aEndBColor.clamp();
if (maColorStops.size() >= 2)
{
aColorStops = maColorStops;
aColorStops.front() = basegfx::BColorStop(maColorStops.front().getStopOffset(), aStartBColor);
aColorStops.back() = basegfx::BColorStop(maColorStops.back().getStopOffset(), aEndBColor);
}
else
{
aColorStops.emplace_back(0.0, aStartBColor);
aColorStops.emplace_back(1.0, aEndBColor);
}
basegfx::BGradient aTmpGradient(
aColorStops,
static_cast<css::awt::GradientStyle>(mrAreaPropertyPanel.GetSelectedTransparencyTypeIndex()-2),
Degree10(static_cast<sal_Int16>(mxMtrTrgrAngle->get_value(FieldUnit::DEGREE)) * 10),
static_cast<sal_uInt16>(mxMtrTrgrCenterX->get_value(FieldUnit::PERCENT)),
static_cast<sal_uInt16>(mxMtrTrgrCenterY->get_value(FieldUnit::PERCENT)),
static_cast<sal_uInt16>(mxMtrTrgrBorder->get_value(FieldUnit::PERCENT)),
100, 100);
mrAreaPropertyPanel.SetGradient(aTmpGradient);
XFillFloatTransparenceItem aGradientItem(aTmpGradient, true );
mrAreaPropertyPanel.setFillFloatTransparence(aGradientItem);
}
IMPL_LINK_NOARG(AreaTransparencyGradientPopup, ModifiedTrgrHdl_Impl, weld::MetricSpinButton&, void)
{
ExecuteValueModify();
}
IMPL_LINK_NOARG(AreaTransparencyGradientPopup, Left_Click45_Impl, const OUString&, void)
{
sal_uInt16 nTemp = static_cast<sal_uInt16>(mxMtrTrgrAngle->get_value(FieldUnit::DEGREE));
if (nTemp>=315)
nTemp -= 360;
nTemp += 45;
mxMtrTrgrAngle->set_value(nTemp, FieldUnit::DEGREE);
ExecuteValueModify();
}
IMPL_LINK_NOARG(AreaTransparencyGradientPopup, Right_Click45_Impl, const OUString&, void)
{
sal_uInt16 nTemp = static_cast<sal_uInt16>(mxMtrTrgrAngle->get_value(FieldUnit::DEGREE));
if (nTemp<45)
nTemp += 360;
nTemp -= 45;
mxMtrTrgrAngle->set_value(nTemp, FieldUnit::DEGREE);
ExecuteValueModify();
}
void AreaTransparencyGradientPopup::GrabFocus()
{
mxMtrTrgrCenterX->grab_focus();
}
} // end of namespace svx::sidebar
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'clamp' is required to be utilized.
↑ V530 The return value of function 'clamp' is required to be utilized.