/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <ChartResourceGroups.hxx>
#include <ChartResourceGroupDlgs.hxx>
#include <strings.hrc>
#include <ResId.hxx>
namespace chart
{
using namespace ::com::sun::star;
using namespace ::com::sun::star::chart2;
Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder)
: m_xCB_3DLook(pBuilder->weld_check_button(u"3dlook"_ustr))
, m_xLB_Scheme(pBuilder->weld_combo_box(u"3dscheme"_ustr))
{
m_xCB_3DLook->connect_toggled(LINK(this, Dim3DLookResourceGroup, Dim3DLookCheckHdl));
m_xLB_Scheme->connect_changed(LINK(this, Dim3DLookResourceGroup, SelectSchemeHdl));
}
void Dim3DLookResourceGroup::showControls(bool bShow)
{
m_xCB_3DLook->set_visible(bShow);
m_xLB_Scheme->set_visible(bShow);
}
void Dim3DLookResourceGroup::fillControls(const ChartTypeParameter& rParameter)
{
m_xCB_3DLook->set_active(rParameter.b3DLook);
m_xLB_Scheme->set_sensitive(rParameter.b3DLook);
// tdf#124295 - select always a 3D scheme
switch (rParameter.eThreeDLookScheme)
{
case ThreeDLookScheme::ThreeDLookScheme_Simple:
m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE);
break;
case ThreeDLookScheme::ThreeDLookScheme_Realistic:
case ThreeDLookScheme::ThreeDLookScheme_Unknown:
m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC);
break;
}
}
void Dim3DLookResourceGroup::fillParameter(ChartTypeParameter& rParameter)
{
rParameter.b3DLook = m_xCB_3DLook->get_active();
// tdf#124295 - select always a 3D scheme
switch (m_xLB_Scheme->get_active())
{
case POS_3DSCHEME_SIMPLE:
rParameter.eThreeDLookScheme = ThreeDLookScheme::ThreeDLookScheme_Simple;
break;
default:
rParameter.eThreeDLookScheme = ThreeDLookScheme::ThreeDLookScheme_Realistic;
}
}
IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::Toggleable&, void)
{
if (m_pChangeListener)
m_pChangeListener->stateChanged();
}
IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void)
{
if (m_pChangeListener)
m_pChangeListener->stateChanged();
}
SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder)
: m_xCB_XValueSorting(pBuilder->weld_check_button(u"sort"_ustr))
{
m_xCB_XValueSorting->connect_toggled(
LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl));
}
void SortByXValuesResourceGroup::showControls(bool bShow)
{
m_xCB_XValueSorting->set_visible(bShow);
}
void SortByXValuesResourceGroup::fillControls(const ChartTypeParameter& rParameter)
{
m_xCB_XValueSorting->set_active(rParameter.bSortByXValues);
}
void SortByXValuesResourceGroup::fillParameter(ChartTypeParameter& rParameter)
{
rParameter.bSortByXValues = m_xCB_XValueSorting->get_active();
}
IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::Toggleable&, void)
{
if (m_pChangeListener)
m_pChangeListener->stateChanged();
}
StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder)
: m_xCB_Stacked(pBuilder->weld_check_button(u"stack"_ustr))
, m_xRB_Stack_Y(pBuilder->weld_radio_button(u"ontop"_ustr))
, m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button(u"percent"_ustr))
, m_xRB_Stack_Z(pBuilder->weld_radio_button(u"deep"_ustr))
{
m_xCB_Stacked->connect_toggled(LINK(this, StackingResourceGroup, StackingEnableHdl));
m_xRB_Stack_Y->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
m_xRB_Stack_Y_Percent->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
m_xRB_Stack_Z->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
}
void StackingResourceGroup::showControls(bool bShow)
{
m_xCB_Stacked->set_visible(bShow);
m_xRB_Stack_Y->set_visible(bShow);
m_xRB_Stack_Y_Percent->set_visible(bShow);
m_xRB_Stack_Z->set_visible(false);
}
void StackingResourceGroup::fillControls(const ChartTypeParameter& rParameter)
{
m_xCB_Stacked->set_active(
rParameter.eStackMode != GlobalStackMode_NONE
&& rParameter.eStackMode
!= GlobalStackMode_STACK_Z); //todo remove this condition if z stacking radio button is really used
switch (rParameter.eStackMode)
{
case GlobalStackMode_STACK_Y:
m_xRB_Stack_Y->set_active(true);
break;
case GlobalStackMode_STACK_Y_PERCENT:
m_xRB_Stack_Y_Percent->set_active(true);
break;
case GlobalStackMode_STACK_Z:
//todo uncomment this condition if z stacking radio button is really used
/*
if( rParameter.b3DLook )
m_xRB_Stack_Z->set_active(true);
else
*/
m_xRB_Stack_Y->set_active(true);
break;
default:
m_xRB_Stack_Y->set_active(true);
break;
}
//dis/enabling
m_xCB_Stacked->set_sensitive(!rParameter.bXAxisWithValues);
m_xRB_Stack_Y->set_sensitive(m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues);
m_xRB_Stack_Y_Percent->set_sensitive(m_xCB_Stacked->get_active()
&& !rParameter.bXAxisWithValues);
m_xRB_Stack_Z->set_sensitive(m_xCB_Stacked->get_active() && rParameter.b3DLook);
}
void StackingResourceGroup::fillParameter(ChartTypeParameter& rParameter)
{
if (!m_xCB_Stacked->get_active())
rParameter.eStackMode = GlobalStackMode_NONE;
else if (m_xRB_Stack_Y->get_active())
rParameter.eStackMode = GlobalStackMode_STACK_Y;
else if (m_xRB_Stack_Y_Percent->get_active())
rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT;
else if (m_xRB_Stack_Z->get_active())
rParameter.eStackMode = GlobalStackMode_STACK_Z;
}
IMPL_LINK(StackingResourceGroup, StackingChangeHdl, weld::Toggleable&, rRadio, void)
{
//for each radio click there are coming two change events
//first uncheck of previous button -> ignore that call
//the second call gives the check of the new button
if (m_pChangeListener && rRadio.get_active())
m_pChangeListener->stateChanged();
}
IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::Toggleable&, void)
{
if (m_pChangeListener)
m_pChangeListener->stateChanged();
}
SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, weld::Window* pParent)
: m_pParent(pParent)
, m_xFT_LineType(pBuilder->weld_label(u"linetypeft"_ustr))
, m_xLB_LineType(pBuilder->weld_combo_box(u"linetype"_ustr))
, m_xPB_DetailsDialog(pBuilder->weld_button(u"properties"_ustr))
{
m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl));
}
const std::shared_ptr<SplinePropertiesDialog>& SplineResourceGroup::getSplinePropertiesDialog()
{
if (!m_xSplinePropertiesDialog)
{
m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent));
}
return m_xSplinePropertiesDialog;
}
const std::shared_ptr<SteppedPropertiesDialog>& SplineResourceGroup::getSteppedPropertiesDialog()
{
if (!m_xSteppedPropertiesDialog)
{
m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent));
}
return m_xSteppedPropertiesDialog;
}
void SplineResourceGroup::showControls(bool bShow)
{
m_xFT_LineType->set_visible(bShow);
m_xLB_LineType->set_visible(bShow);
m_xPB_DetailsDialog->set_visible(bShow);
}
void SplineResourceGroup::fillControls(const ChartTypeParameter& rParameter)
{
switch (rParameter.eCurveStyle)
{
case CurveStyle_LINES:
m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT);
m_xPB_DetailsDialog->set_sensitive(false);
break;
case CurveStyle_CUBIC_SPLINES:
case CurveStyle_B_SPLINES:
m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
m_xPB_DetailsDialog->set_sensitive(true);
m_xPB_DetailsDialog->connect_clicked(
LINK(this, SplineResourceGroup, SplineDetailsDialogHdl));
m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
getSplinePropertiesDialog()->fillControls(rParameter);
break;
case CurveStyle_STEP_START:
case CurveStyle_STEP_END:
case CurveStyle_STEP_CENTER_X:
case CurveStyle_STEP_CENTER_Y:
m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
m_xPB_DetailsDialog->set_sensitive(true);
m_xPB_DetailsDialog->connect_clicked(
LINK(this, SplineResourceGroup, SteppedDetailsDialogHdl));
m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
getSteppedPropertiesDialog()->fillControls(rParameter);
break;
default:
m_xLB_LineType->set_active(-1);
m_xPB_DetailsDialog->set_sensitive(false);
}
}
void SplineResourceGroup::fillParameter(ChartTypeParameter& rParameter)
{
switch (m_xLB_LineType->get_active())
{
case POS_LINETYPE_SMOOTH:
getSplinePropertiesDialog()->fillParameter(rParameter, true);
break;
case POS_LINETYPE_STEPPED:
getSteppedPropertiesDialog()->fillParameter(rParameter, true);
break;
default: // includes POS_LINETYPE_STRAIGHT
rParameter.eCurveStyle = CurveStyle_LINES;
break;
}
}
IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void)
{
if (m_pChangeListener)
m_pChangeListener->stateChanged();
}
IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void)
{
ChartTypeParameter aOldParameter;
std::shared_ptr<SplinePropertiesDialog> xDlg = getSplinePropertiesDialog();
xDlg->fillParameter(aOldParameter, m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH);
const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
weld::GenericDialogController::runAsync(xDlg, [this, xDlg, aOldParameter,
iOldLineTypePos](sal_Int32 nResult) {
m_xSplinePropertiesDialog = nullptr;
auto xNewDlg = getSplinePropertiesDialog();
if (nResult == RET_OK)
{
ChartTypeParameter aNewParameter;
xDlg->fillParameter(aNewParameter, m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH);
xNewDlg->fillControls(aNewParameter);
if (m_pChangeListener)
m_pChangeListener->stateChanged();
}
else
{
//restore old state:
m_xLB_LineType->set_active(iOldLineTypePos);
xNewDlg->fillControls(aOldParameter);
}
});
}
IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void)
{
ChartTypeParameter aOldParameter;
std::shared_ptr<SteppedPropertiesDialog> xDlg = getSteppedPropertiesDialog();
xDlg->fillParameter(aOldParameter, m_xLB_LineType->get_active() == POS_LINETYPE_STEPPED);
const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
weld::GenericDialogController::runAsync(
xDlg, [this, xDlg, aOldParameter, iOldLineTypePos](sal_Int32 nResult) {
m_xSteppedPropertiesDialog = nullptr;
auto xNewDlg = getSteppedPropertiesDialog();
if (nResult == RET_OK)
{
ChartTypeParameter aNewParameter;
xDlg->fillParameter(aNewParameter,
m_xLB_LineType->get_active() == POS_LINETYPE_STEPPED);
xNewDlg->fillControls(aNewParameter);
if (m_pChangeListener)
m_pChangeListener->stateChanged();
}
else
{
//restore old state:
m_xLB_LineType->set_active(iOldLineTypePos);
xDlg->fillControls(aOldParameter);
}
});
}
GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder)
: m_aGeometryResources(pBuilder)
{
m_aGeometryResources.connect_changed(LINK(this, GeometryResourceGroup, GeometryChangeHdl));
}
void GeometryResourceGroup::showControls(bool bShow) { m_aGeometryResources.set_visible(bShow); }
void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter)
{
sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D);
m_aGeometryResources.select(nGeometry3D);
m_aGeometryResources.set_sensitive(rParameter.b3DLook);
}
void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter)
{
rParameter.nGeometry3D = 1;
int nSelected = m_aGeometryResources.get_selected_index();
if (nSelected != -1)
rParameter.nGeometry3D = nSelected;
}
IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void)
{
if (m_pChangeListener)
m_pChangeListener->stateChanged();
}
} //namespace chart
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1037 Two or more case-branches perform the same actions. Check lines: 146, 158