/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <com/sun/star/chart/ErrorBarStyle.hpp>
#include <com/sun/star/chart/DataLabelPlacement.hpp>
#include <vcl/svapp.hxx>
#include <sal/log.hxx>
#include "ChartSeriesPanel.hxx"
#include <ChartController.hxx>
#include <ChartModel.hxx>
#include <ChartType.hxx>
#include <DataSeries.hxx>
#include <DataSeriesHelper.hxx>
#include <Diagram.hxx>
#include <RegressionCurveHelper.hxx>
#include <RegressionCurveModel.hxx>
#include <StatisticsHelper.hxx>
#include <BaseCoordinateSystem.hxx>
#include <comphelper/processfactory.hxx>
using namespace css;
using namespace css::uno;
namespace chart::sidebar {
namespace {
bool isDataLabelVisible(const rtl::Reference<::chart::ChartModel>& xModel, std::u16string_view rCID)
{
rtl::Reference< DataSeries > xSeries =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xSeries.is())
return false;
return DataSeriesHelper::hasDataLabelsAtSeries(xSeries);
}
void setDataLabelVisible(const rtl::Reference<::chart::ChartModel>& xModel, std::u16string_view rCID, bool bVisible)
{
rtl::Reference< DataSeries > xSeries =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xSeries.is())
return;
if (bVisible)
DataSeriesHelper::insertDataLabelsToSeriesAndAllPoints(xSeries);
else
DataSeriesHelper::deleteDataLabelsFromSeriesAndAllPoints(xSeries);
}
struct LabelPlacementMap
{
sal_Int32 nPos;
sal_Int32 nApi;
};
LabelPlacementMap const aLabelPlacementMap[] = {
{ 0, css::chart::DataLabelPlacement::TOP },
{ 1, css::chart::DataLabelPlacement::BOTTOM },
{ 2, css::chart::DataLabelPlacement::CENTER },
{ 3, css::chart::DataLabelPlacement::OUTSIDE },
{ 4, css::chart::DataLabelPlacement::INSIDE },
{ 5, css::chart::DataLabelPlacement::NEAR_ORIGIN }
};
sal_Int32 getDataLabelPlacement(const rtl::Reference<::chart::ChartModel>& xModel,
std::u16string_view rCID)
{
rtl::Reference< DataSeries > xSeries =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xSeries.is())
return 0;
css::uno::Any aAny = xSeries->getPropertyValue(u"LabelPlacement"_ustr);
if (!aAny.hasValue())
return 0;
sal_Int32 nPlacement = 0;
aAny >>= nPlacement;
for (LabelPlacementMap const & i : aLabelPlacementMap)
{
if (i.nApi == nPlacement)
return i.nPos;
}
return 0;
}
void setDataLabelPlacement(const rtl::Reference<::chart::ChartModel>& xModel,
std::u16string_view rCID, sal_Int32 nPos)
{
rtl::Reference< DataSeries > xSeries =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xSeries.is())
return;
sal_Int32 nApi = 0;
for (LabelPlacementMap const & i : aLabelPlacementMap)
{
if (i.nPos == nPos)
{
nApi = i.nApi;
break;
}
}
xSeries->setPropertyValue(u"LabelPlacement"_ustr, css::uno::Any(nApi));
}
bool isTrendlineVisible(const rtl::Reference<::chart::ChartModel>& xModel,
std::u16string_view rCID)
{
rtl::Reference< DataSeries > xRegressionCurveContainer =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xRegressionCurveContainer.is())
return false;
return !xRegressionCurveContainer->getRegressionCurves2().empty();
}
void setTrendlineVisible(const rtl::Reference<::chart::ChartModel>&
xModel, std::u16string_view rCID, bool bVisible)
{
rtl::Reference< DataSeries > xRegressionCurveContainer =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xRegressionCurveContainer.is())
return;
if (bVisible)
{
RegressionCurveHelper::addRegressionCurve(
SvxChartRegress::Linear,
xRegressionCurveContainer);
}
else
RegressionCurveHelper::removeAllExceptMeanValueLine(
xRegressionCurveContainer );
}
bool isErrorBarVisible(const rtl::Reference<::chart::ChartModel>& xModel,
std::u16string_view rCID, bool bYError)
{
rtl::Reference< DataSeries > xSeries =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xSeries.is())
return false;
return StatisticsHelper::hasErrorBars(xSeries, bYError);
}
void setErrorBarVisible(const rtl::Reference<::chart::ChartModel>&
xModel, std::u16string_view rCID, bool bYError, bool bVisible)
{
rtl::Reference< DataSeries > xSeries =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xSeries.is())
return;
if (bVisible)
{
StatisticsHelper::addErrorBars( xSeries,
css::chart::ErrorBarStyle::STANDARD_DEVIATION,
bYError);
}
else
{
StatisticsHelper::removeErrorBars( xSeries, bYError );
}
}
bool isPrimaryAxis(const rtl::Reference<::chart::ChartModel>&
xModel, std::u16string_view rCID)
{
rtl::Reference< DataSeries > xSeries =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xSeries.is())
return true;
return DataSeriesHelper::getAttachedAxisIndex(xSeries) == 0;
}
void setAttachedAxisType(const rtl::Reference<::chart::ChartModel>&
xModel, std::u16string_view rCID, bool bPrimary)
{
const rtl::Reference<DataSeries> xDataSeries = ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xDataSeries.is())
return;
rtl::Reference<Diagram> xDiagram = xModel->getFirstChartDiagram();
xDiagram->attachSeriesToAxis(bPrimary, xDataSeries, comphelper::getProcessComponentContext());
}
rtl::Reference<ChartType> getChartType(
const rtl::Reference<::chart::ChartModel>& xModel)
{
rtl::Reference<Diagram> xDiagram = xModel->getFirstChartDiagram();
const std::vector< rtl::Reference< BaseCoordinateSystem > > xCooSysSequence( xDiagram->getBaseCoordinateSystems());
return xCooSysSequence[0]->getChartTypes2()[0];
}
OUString getSeriesLabel(const rtl::Reference<::chart::ChartModel>& xModel, std::u16string_view rCID)
{
rtl::Reference< DataSeries > xSeries =
ObjectIdentifier::getDataSeriesForCID(rCID, xModel);
if (!xSeries.is())
return OUString();
rtl::Reference<ChartType> xChartType = getChartType(xModel);
return xSeries->getLabelForRole(xChartType->getRoleOfSequenceForSeriesLabel());
}
OUString getCID(const css::uno::Reference<css::frame::XModel>& xModel)
{
css::uno::Reference<css::frame::XController> xController(xModel->getCurrentController());
css::uno::Reference<css::view::XSelectionSupplier> xSelectionSupplier(xController, css::uno::UNO_QUERY);
if (!xSelectionSupplier.is())
return OUString();
uno::Any aAny = xSelectionSupplier->getSelection();
if (!aAny.hasValue())
return OUString();
OUString aCID;
aAny >>= aCID;
if (aCID.isEmpty())
return OUString();
#if defined DBG_UTIL && !defined NDEBUG
ObjectType eType = ObjectIdentifier::getObjectType(aCID);
if (eType != OBJECTTYPE_DATA_SERIES &&
eType != OBJECTTYPE_DATA_POINT &&
eType != OBJECTTYPE_DATA_CURVE)
SAL_WARN("chart2","Selected item is not a chart series");
#endif
return aCID;
}
}
ChartSeriesPanel::ChartSeriesPanel(
weld::Widget* pParent,
ChartController* pController)
: PanelLayout(pParent, u"ChartSeriesPanel"_ustr, u"modules/schart/ui/sidebarseries.ui"_ustr)
, mxCBLabel(m_xBuilder->weld_check_button(u"checkbutton_label"_ustr))
, mxCBTrendline(m_xBuilder->weld_check_button(u"checkbutton_trendline"_ustr))
, mxCBXError(m_xBuilder->weld_check_button(u"checkbutton_x_error"_ustr))
, mxCBYError(m_xBuilder->weld_check_button(u"checkbutton_y_error"_ustr))
, mxRBPrimaryAxis(m_xBuilder->weld_radio_button(u"radiobutton_primary_axis"_ustr))
, mxRBSecondaryAxis(m_xBuilder->weld_radio_button(u"radiobutton_secondary_axis"_ustr))
, mxBoxLabelPlacement(m_xBuilder->weld_widget(u"datalabel_box"_ustr))
, mxLBLabelPlacement(m_xBuilder->weld_combo_box(u"comboboxtext_label"_ustr))
, mxFTSeriesName(m_xBuilder->weld_label(u"label_series_name"_ustr))
, mxFTSeriesTemplate(m_xBuilder->weld_label(u"label_series_tmpl"_ustr))
, mxModel(pController->getChartModel())
, mxListener(new ChartSidebarModifyListener(this))
, mxSelectionListener(new ChartSidebarSelectionListener(this, OBJECTTYPE_DATA_SERIES))
, mbModelValid(true)
{
Initialize();
}
ChartSeriesPanel::~ChartSeriesPanel()
{
doUpdateModel(nullptr);
mxCBLabel.reset();
mxCBTrendline.reset();
mxCBXError.reset();
mxCBYError.reset();
mxRBPrimaryAxis.reset();
mxRBSecondaryAxis.reset();
mxBoxLabelPlacement.reset();
mxLBLabelPlacement.reset();
mxFTSeriesName.reset();
mxFTSeriesTemplate.reset();
}
void ChartSeriesPanel::Initialize()
{
mxModel->addModifyListener(mxListener);
css::uno::Reference<css::view::XSelectionSupplier> xSelectionSupplier(mxModel->getCurrentController(), css::uno::UNO_QUERY);
if (xSelectionSupplier.is())
xSelectionSupplier->addSelectionChangeListener(mxSelectionListener);
updateData();
Link<weld::Toggleable&,void> aLink = LINK(this, ChartSeriesPanel, CheckBoxHdl);
mxCBLabel->connect_toggled(aLink);
mxCBTrendline->connect_toggled(aLink);
mxCBXError->connect_toggled(aLink);
mxCBYError->connect_toggled(aLink);
Link<weld::Toggleable&,void> aLink2 = LINK(this, ChartSeriesPanel, RadioBtnHdl);
mxRBPrimaryAxis->connect_toggled(aLink2);
mxRBSecondaryAxis->connect_toggled(aLink2);
mxLBLabelPlacement->connect_changed(LINK(this, ChartSeriesPanel, ListBoxHdl));
}
void ChartSeriesPanel::updateData()
{
if (!mbModelValid)
return;
OUString aCID = getCID(mxModel);
ObjectType eType = ObjectIdentifier::getObjectType(aCID);
if (eType!=OBJECTTYPE_DATA_SERIES &&
eType != OBJECTTYPE_DATA_POINT &&
eType != OBJECTTYPE_DATA_CURVE)
return;
SolarMutexGuard aGuard;
bool bLabelVisible = isDataLabelVisible(mxModel, aCID);
mxCBLabel->set_active(bLabelVisible);
mxCBTrendline->set_active(isTrendlineVisible(mxModel, aCID));
mxCBXError->set_active(isErrorBarVisible(mxModel, aCID, false));
mxCBYError->set_active(isErrorBarVisible(mxModel, aCID, true));
bool bPrimaryAxis = isPrimaryAxis(mxModel, aCID);
mxRBPrimaryAxis->set_active(bPrimaryAxis);
mxRBSecondaryAxis->set_active(!bPrimaryAxis);
mxBoxLabelPlacement->set_sensitive(bLabelVisible);
mxLBLabelPlacement->set_active(getDataLabelPlacement(mxModel, aCID));
OUString aFrameLabel = mxFTSeriesTemplate->get_label();
aFrameLabel = aFrameLabel.replaceFirst("%1", getSeriesLabel(mxModel, aCID));
mxFTSeriesName->set_label(aFrameLabel);
}
std::unique_ptr<PanelLayout> ChartSeriesPanel::Create (
weld::Widget* pParent,
ChartController* pController)
{
if (pParent == nullptr)
throw lang::IllegalArgumentException(u"no parent Window given to ChartSeriesPanel::Create"_ustr, nullptr, 0);
return std::make_unique<ChartSeriesPanel>(pParent, pController);
}
void ChartSeriesPanel::DataChanged(const DataChangedEvent& rEvent)
{
PanelLayout::DataChanged(rEvent);
updateData();
}
void ChartSeriesPanel::HandleContextChange(
const vcl::EnumContext& )
{
updateData();
}
void ChartSeriesPanel::NotifyItemUpdate(
sal_uInt16 /*nSID*/,
SfxItemState /*eState*/,
const SfxPoolItem* /*pState*/ )
{
}
void ChartSeriesPanel::modelInvalid()
{
mbModelValid = false;
}
void ChartSeriesPanel::doUpdateModel(const rtl::Reference<::chart::ChartModel>& xModel)
{
if (mbModelValid)
{
mxModel->removeModifyListener(mxListener);
}
css::uno::Reference<css::view::XSelectionSupplier> oldSelectionSupplier(
mxModel->getCurrentController(), css::uno::UNO_QUERY);
if (oldSelectionSupplier.is()) {
oldSelectionSupplier->removeSelectionChangeListener(mxSelectionListener);
}
mxModel = xModel;
mbModelValid = mxModel.is();
if (!mbModelValid)
return;
mxModel->addModifyListener(mxListener);
css::uno::Reference<css::view::XSelectionSupplier> xSelectionSupplier(mxModel->getCurrentController(), css::uno::UNO_QUERY);
if (xSelectionSupplier.is())
xSelectionSupplier->addSelectionChangeListener(mxSelectionListener);
}
void ChartSeriesPanel::updateModel(css::uno::Reference<css::frame::XModel> xModel)
{
::chart::ChartModel* pModel = dynamic_cast<::chart::ChartModel*>(xModel.get());
assert(!xModel || pModel);
doUpdateModel(pModel);
}
void ChartSeriesPanel::selectionChanged(bool bCorrectType)
{
if (bCorrectType)
updateData();
}
IMPL_LINK(ChartSeriesPanel, CheckBoxHdl, weld::Toggleable&, rCheckBox, void)
{
bool bChecked = rCheckBox.get_active();
OUString aCID = getCID(mxModel);
if (&rCheckBox == mxCBLabel.get())
setDataLabelVisible(mxModel, aCID, bChecked);
else if (&rCheckBox == mxCBTrendline.get())
setTrendlineVisible(mxModel, aCID, bChecked);
else if (&rCheckBox == mxCBXError.get())
setErrorBarVisible(mxModel, aCID, false, bChecked);
else if (&rCheckBox == mxCBYError.get())
setErrorBarVisible(mxModel, aCID, true, bChecked);
}
IMPL_LINK_NOARG(ChartSeriesPanel, RadioBtnHdl, weld::Toggleable&, void)
{
OUString aCID = getCID(mxModel);
bool bChecked = mxRBPrimaryAxis->get_active();
setAttachedAxisType(mxModel, aCID, bChecked);
}
IMPL_LINK_NOARG(ChartSeriesPanel, ListBoxHdl, weld::ComboBox&, void)
{
OUString aCID = getCID(mxModel);
sal_Int32 nPos = mxLBLabelPlacement->get_active();
setDataLabelPlacement(mxModel, aCID, nPos);
}
} // end of namespace ::chart::sidebar
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1053 Calling the 'updateData' virtual function indirectly in the constructor may lead to unexpected result at runtime. Check lines: 'ChartSeriesPanel.cxx:293', 'ChartSeriesPanel.cxx:322', 'ChartSeriesPanel.hxx:71'.