/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */
 
#include <config_features.h>
 
#include <com/sun/star/presentation/EffectNodeType.hpp>
#include <com/sun/star/animations/Timing.hpp>
#include <com/sun/star/animations/Event.hpp>
#include <com/sun/star/animations/EventTrigger.hpp>
#include <com/sun/star/animations/AnimationFill.hpp>
#include <com/sun/star/presentation/TextAnimationType.hpp>
#include <com/sun/star/animations/ValuePair.hpp>
#include <com/sun/star/awt/FontSlant.hpp>
#include <com/sun/star/awt/FontWeight.hpp>
#include <com/sun/star/awt/FontUnderline.hpp>
#include <com/sun/star/drawing/XDrawPage.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/media/XPlayer.hpp>
 
#include <memory>
 
#include <comphelper/lok.hxx>
#include <i18nutil/unicode.hxx>
#include <vcl/svapp.hxx>
#include <vcl/stdtext.hxx>
#include <vcl/weld/ComboBox.hxx>
#include <vcl/weld/weld.hxx>
#include <vcl/settings.hxx>
 
#include <svtools/ctrltool.hxx>
#include <sfx2/objsh.hxx>
#include <sfx2/viewsh.hxx>
#include <tools/debug.hxx>
#include <tools/urlobj.hxx>
#include <comphelper/diagnose_ex.hxx>
 
#include <editeng/flstitem.hxx>
 
#include <svx/colorbox.hxx>
#include <svx/gallery.hxx>
 
#include <editeng/editids.hrc>
#include <sdresid.hxx>
 
#include "CustomAnimationDialog.hxx"
#include <CustomAnimationPane.hxx>
#include "STLPropertySet.hxx"
#include <CustomAnimationPreset.hxx>
 
#include <avmedia/mediawindow.hxx>
 
#include <filedlg.hxx>
#include <strings.hrc>
#include <helpids.h>
 
using namespace ::com::sun::star;
using namespace ::com::sun::star::animations;
using namespace ::com::sun::star::presentation;
 
using ::com::sun::star::uno::UNO_QUERY;
using ::com::sun::star::uno::Any;
using ::com::sun::star::uno::Sequence;
using ::com::sun::star::uno::Reference;
using ::com::sun::star::uno::Exception;
using ::com::sun::star::drawing::XShape;
using ::com::sun::star::drawing::XDrawPage;
using ::com::sun::star::beans::XPropertySet;
 
namespace sd {
 
SdPropertySubControl::SdPropertySubControl(weld::Container* pParent)
    : mxBuilder(Application::CreateBuilder(pParent, u"modules/simpress/ui/customanimationfragment.ui"_ustr,
        false, reinterpret_cast<sal_uInt64>(SfxViewShell::Current())))
    , mxContainer(mxBuilder->weld_container(u"EffectFragment"_ustr))
    , mpParent(pParent)
{
}
 
SdPropertySubControl::~SdPropertySubControl()
{
    mpParent->move(mxContainer.get(), nullptr);
}
 
namespace {
 
class SdPresetPropertyBox  : public SdPropertySubControl
{
public:
    SdPresetPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const OUString& aPresetId, const Link<LinkParamNone*,void>& rModifyHdl);
 
    virtual Any getValue() override;
    virtual void setValue( const Any& rValue, const OUString& rPresetId ) override;
 
private:
    std::vector<OUString> maPropertyValues;
    Link<LinkParamNone*,void> maModifyLink;
    std::unique_ptr<weld::ComboBox> mxControl;
 
    DECL_LINK(OnSelect, weld::ComboBox&, void);
};
 
}
 
SdPresetPropertyBox::SdPresetPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const OUString& aPresetId, const Link<LinkParamNone*,void>& rModifyHdl)
    : SdPropertySubControl(pParent)
    , maModifyLink(rModifyHdl)
    , mxControl(mxBuilder->weld_combo_box(u"combo"_ustr))
{
    mxControl->connect_changed(LINK(this, SdPresetPropertyBox, OnSelect));
    mxControl->set_help_id(HID_SD_CUSTOMANIMATIONPANE_PRESETPROPERTYBOX);
    mxControl->show();
    pLabel->set_mnemonic_widget(mxControl.get());
    setValue(rValue, aPresetId);
}
 
IMPL_LINK_NOARG(SdPresetPropertyBox, OnSelect, weld::ComboBox&, void)
{
    maModifyLink.Call(nullptr);
}
 
void SdPresetPropertyBox::setValue( const Any& rValue, const OUString& rPresetId )
{
    if (!mxControl)
        return;
 
    mxControl->freeze();
    mxControl->clear();
    maPropertyValues.clear();
    int nPos = -1;
 
    const CustomAnimationPresets& rPresets = CustomAnimationPresets::getCustomAnimationPresets();
    CustomAnimationPresetPtr pDescriptor = rPresets.getEffectDescriptor( rPresetId );
    if( pDescriptor )
    {
 
        OUString aPropertyValue;
        rValue >>= aPropertyValue;
 
        std::vector<OUString> aSubTypes( pDescriptor->getSubTypes() );
 
        mxControl->set_sensitive(!aSubTypes.empty());
 
        for( const auto& aSubType : aSubTypes )
        {
            mxControl->append_text(rPresets.getUINameForProperty(aSubType));
            maPropertyValues.push_back(aSubType);
            if (aSubType == aPropertyValue)
                nPos = maPropertyValues.size() - 1;
        }
    }
    else
    {
        mxControl->set_sensitive(false);
    }
    mxControl->thaw();
    if (nPos != -1)
        mxControl->set_active(nPos);
}
 
Any SdPresetPropertyBox::getValue()
{
    const int nIndex = mxControl->get_active();
    if (nIndex == -1)
        return Any();
    return Any(maPropertyValues[nIndex]);
}
 
namespace {
 
class SdColorPropertyBox : public SdPropertySubControl
{
public:
    SdColorPropertyBox(weld::Label* pLabel, weld::Container* pParent, weld::Window* pTopLevel, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl);
 
    virtual Any getValue() override;
    virtual void setValue( const Any& rValue, const OUString& rPresetId  ) override;
 
private:
    Link<LinkParamNone*,void> maModifyLink;
    std::unique_ptr<ColorListBox> mxControl;
 
    DECL_LINK(OnSelect, ColorListBox&, void);
};
 
}
 
SdColorPropertyBox::SdColorPropertyBox(weld::Label* pLabel, weld::Container* pParent, weld::Window* pTopLevel, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl)
    : SdPropertySubControl(pParent)
    , maModifyLink(rModifyHdl)
    , mxControl(new ColorListBox(mxBuilder->weld_menu_button(u"color"_ustr), [pTopLevel]{ return pTopLevel; }))
{
    mxControl->SetSelectHdl(LINK(this, SdColorPropertyBox, OnSelect));
    mxControl->set_help_id(HID_SD_CUSTOMANIMATIONPANE_COLORPROPERTYBOX);
    pLabel->set_mnemonic_widget(&mxControl->get_widget());
    mxControl->show();
 
    Color nColor;
    rValue >>= nColor;
    mxControl->SelectEntry(nColor);
}
 
IMPL_LINK_NOARG(SdColorPropertyBox, OnSelect, ColorListBox&, void)
{
    maModifyLink.Call(nullptr);
}
 
void SdColorPropertyBox::setValue( const Any& rValue, const OUString& )
{
    if (mxControl)
    {
        Color nColor;
        rValue >>= nColor;
 
        mxControl->SetNoSelection();
        mxControl->SelectEntry(nColor);
    }
}
 
Any SdColorPropertyBox::getValue()
{
    return Any(sal_Int32(mxControl->GetSelectEntryColor().GetRGBColor()));
}
 
namespace {
 
class SdFontPropertyBox : public SdPropertySubControl
{
public:
    SdFontPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl);
 
    virtual Any getValue() override;
    virtual void setValue(const Any& rValue, const OUString& rPresetId) override;
 
private:
    Link<LinkParamNone*,void>   maModifyHdl;
    std::unique_ptr<weld::ComboBox> mxControl;
 
    DECL_LINK(ControlSelectHdl, weld::ComboBox&, void);
};
 
}
 
SdFontPropertyBox::SdFontPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl)
    : SdPropertySubControl(pParent)
    , maModifyHdl(rModifyHdl)
    , mxControl(mxBuilder->weld_combo_box(u"fontname"_ustr))
{
    mxControl->connect_changed(LINK(this, SdFontPropertyBox, ControlSelectHdl));
    mxControl->set_help_id(HID_SD_CUSTOMANIMATIONPANE_FONTPROPERTYBOX);
    mxControl->show();
    pLabel->set_mnemonic_widget(mxControl.get());
 
    const FontList* pFontList = nullptr;
    bool bMustDelete = false;
 
    if (SfxObjectShell* pDocSh = SfxObjectShell::Current())
    {
        const SvxFontListItem* pItem = pDocSh->GetItem( SID_ATTR_CHAR_FONTLIST );
        if (pItem)
            pFontList = pItem->GetFontList();
    }
 
    if (!pFontList)
    {
        pFontList = new FontList(Application::GetDefaultDevice(), nullptr);
        bMustDelete = true;
    }
 
    mxControl->freeze();
 
    sal_uInt16 nFontCount = pFontList->GetFontNameCount();
    for (sal_uInt16 i = 0; i < nFontCount; ++i)
    {
        const FontMetric& rFontMetric = pFontList->GetFontName(i);
        mxControl->append_text(rFontMetric.GetFamilyName());
    }
 
    mxControl->thaw();
 
    if( bMustDelete )
        delete pFontList;
 
    setValue( rValue, OUString() );
}
 
IMPL_LINK_NOARG(SdFontPropertyBox, ControlSelectHdl, weld::ComboBox&, void)
{
    maModifyHdl.Call(nullptr);
}
 
void SdFontPropertyBox::setValue( const Any& rValue, const OUString& )
{
    if (mxControl)
    {
        OUString aFontName;
        rValue >>= aFontName;
        mxControl->set_entry_text(aFontName);
    }
}
 
Any SdFontPropertyBox::getValue()
{
    OUString aFontName(mxControl->get_active_text());
    return Any(aFontName);
}
 
namespace {
 
class SdCharHeightPropertyBox : public SdPropertySubControl
{
public:
    SdCharHeightPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl);
 
    virtual Any getValue() override;
    virtual void setValue( const Any& rValue, const OUString& ) override;
 
    DECL_LINK(implMenuSelectHdl, const OUString& rIdent, void);
 
private:
    Link<LinkParamNone*,void> maModifyHdl;
    std::unique_ptr<weld::MetricSpinButton> mxMetric;
    std::unique_ptr<weld::MenuButton> mxControl;
 
    DECL_LINK(EditModifyHdl, weld::MetricSpinButton&, void);
};
 
}
 
SdCharHeightPropertyBox::SdCharHeightPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl)
    : SdPropertySubControl(pParent)
    , maModifyHdl(rModifyHdl)
    , mxMetric(mxBuilder->weld_metric_spin_button(u"fontsize"_ustr, FieldUnit::PERCENT))
    , mxControl(mxBuilder->weld_menu_button(u"fontsizemenu"_ustr))
{
    mxMetric->connect_value_changed(LINK(this, SdCharHeightPropertyBox, EditModifyHdl));
    mxMetric->set_help_id(HID_SD_CUSTOMANIMATIONPANE_CHARHEIGHTPROPERTYBOX);
    mxMetric->show();
    pLabel->set_mnemonic_widget(&mxMetric->get_widget());
 
    mxControl->connect_selected(LINK(this, SdCharHeightPropertyBox, implMenuSelectHdl));
    mxControl->set_help_id(HID_SD_CUSTOMANIMATIONPANE_CHARHEIGHTPROPERTYBOX);
    mxControl->show();
 
    setValue(rValue, OUString());
}
 
IMPL_LINK_NOARG(SdCharHeightPropertyBox, EditModifyHdl, weld::MetricSpinButton&, void)
{
    maModifyHdl.Call(nullptr);
}
 
IMPL_LINK(SdCharHeightPropertyBox, implMenuSelectHdl, const OUString&, rIdent, void)
{
    sal_Int32 nValue = rIdent.toInt32();
    mxMetric->set_value(nValue, FieldUnit::PERCENT);
    EditModifyHdl(*mxMetric);
}
 
void SdCharHeightPropertyBox::setValue( const Any& rValue, const OUString& )
{
    if (mxMetric)
    {
        double fValue = 0.0;
        rValue >>= fValue;
        mxMetric->set_value(static_cast<::tools::Long>(fValue * 100.0), FieldUnit::PERCENT);
    }
}
 
Any SdCharHeightPropertyBox::getValue()
{
    return Any(static_cast<double>(mxMetric->get_value(FieldUnit::PERCENT)) / 100.0);
}
 
namespace {
 
class SdTransparencyPropertyBox : public SdPropertySubControl
{
public:
    SdTransparencyPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl);
 
    virtual Any getValue() override;
    virtual void setValue( const Any& rValue, const OUString& rPresetId  ) override;
 
    DECL_LINK(implMenuSelectHdl, const OUString&, void);
    DECL_LINK(implModifyHdl, weld::MetricSpinButton&, void);
 
    void updateMenu();
 
private:
    Link<LinkParamNone*,void> maModifyHdl;
 
    std::unique_ptr<weld::MetricSpinButton> mxMetric;
    std::unique_ptr<weld::MenuButton> mxControl;
};
 
}
 
SdTransparencyPropertyBox::SdTransparencyPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl)
    : SdPropertySubControl(pParent)
    , maModifyHdl(rModifyHdl)
    , mxMetric(mxBuilder->weld_metric_spin_button(u"transparent"_ustr, FieldUnit::PERCENT))
    , mxControl(mxBuilder->weld_menu_button(u"transparentmenu"_ustr))
{
    for (sal_Int32 i = 25; i < 101; i += 25)
    {
        OUString aStr(unicode::formatPercent(i,
            Application::GetSettings().GetUILanguageTag()));
        mxControl->append_item_check(OUString::number(i), aStr);
    }
 
    mxControl->connect_selected(LINK(this, SdTransparencyPropertyBox, implMenuSelectHdl));
    mxControl->set_help_id(HID_SD_CUSTOMANIMATIONPANE_TRANSPARENCYPROPERTYBOX);
    mxControl->show();
 
    mxMetric->connect_value_changed(LINK(this, SdTransparencyPropertyBox, implModifyHdl));
    mxMetric->set_help_id(HID_SD_CUSTOMANIMATIONPANE_TRANSPARENCYPROPERTYBOX);
    mxMetric->show();
    pLabel->set_mnemonic_widget(&mxMetric->get_widget());
 
    setValue(rValue, OUString());
}
 
void SdTransparencyPropertyBox::updateMenu()
{
    sal_Int64 nValue = mxMetric->get_value(FieldUnit::PERCENT);
    for (sal_uInt16 i = 25; i < 101; i += 25)
        mxControl->set_item_active(OUString::number(i), nValue == i);
}
 
IMPL_LINK_NOARG(SdTransparencyPropertyBox, implModifyHdl, weld::MetricSpinButton&, void)
{
    updateMenu();
    maModifyHdl.Call(nullptr);
}
 
IMPL_LINK(SdTransparencyPropertyBox, implMenuSelectHdl, const OUString&, rIdent, void)
{
    auto nValue = rIdent.toInt32();
    if (nValue != mxMetric->get_value(FieldUnit::PERCENT))
    {
        mxMetric->set_value(nValue, FieldUnit::PERCENT);
        implModifyHdl(*mxMetric);
    }
}
 
void SdTransparencyPropertyBox::setValue(const Any& rValue, const OUString&)
{
    if (mxMetric)
    {
        double fValue = 0.0;
        rValue >>= fValue;
        ::tools::Long nValue = static_cast<::tools::Long>(fValue * 100);
        mxMetric->set_value(nValue, FieldUnit::PERCENT);
        updateMenu();
    }
}
 
Any SdTransparencyPropertyBox::getValue()
{
    return Any(static_cast<double>(mxMetric->get_value(FieldUnit::PERCENT)) / 100.0);
}
 
namespace {
 
class SdRotationPropertyBox : public SdPropertySubControl
{
public:
    SdRotationPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl);
 
    virtual Any getValue() override;
    virtual void setValue( const Any& rValue, const OUString& ) override;
 
    DECL_LINK(implMenuSelectHdl, const OUString&, void);
    DECL_LINK(implModifyHdl, weld::MetricSpinButton&, void);
 
    void updateMenu();
 
private:
    Link<LinkParamNone*,void> maModifyHdl;
 
    std::unique_ptr<weld::MetricSpinButton> mxMetric;
    std::unique_ptr<weld::MenuButton> mxControl;
};
 
}
 
SdRotationPropertyBox::SdRotationPropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl)
    : SdPropertySubControl(pParent)
    , maModifyHdl(rModifyHdl)
    , mxMetric(mxBuilder->weld_metric_spin_button(u"rotate"_ustr, FieldUnit::DEGREE))
    , mxControl(mxBuilder->weld_menu_button(u"rotatemenu"_ustr))
{
    mxMetric->connect_value_changed(LINK( this, SdRotationPropertyBox, implModifyHdl));
    mxMetric->set_help_id(HID_SD_CUSTOMANIMATIONPANE_ROTATIONPROPERTYBOX);
    mxMetric->show();
    pLabel->set_mnemonic_widget(&mxMetric->get_widget());
 
    mxControl->connect_selected(LINK(this, SdRotationPropertyBox, implMenuSelectHdl));
    mxControl->set_help_id(HID_SD_CUSTOMANIMATIONPANE_ROTATIONPROPERTYBOX);
    mxControl->show();
 
    setValue(rValue, OUString());
}
 
void SdRotationPropertyBox::updateMenu()
{
    sal_Int64 nValue = mxMetric->get_value(FieldUnit::DEGREE);
    bool bDirection = nValue >= 0;
    if (nValue < 0) nValue = o3tl::saturating_toggle_sign(nValue);
 
    mxControl->set_item_active(u"90"_ustr, nValue == 90);
    mxControl->set_item_active(u"180"_ustr, nValue == 180);
    mxControl->set_item_active(u"360"_ustr, nValue == 360);
    mxControl->set_item_active(u"720"_ustr, nValue == 720);
 
    mxControl->set_item_active(u"clockwise"_ustr, bDirection);
    mxControl->set_item_active(u"counterclock"_ustr, !bDirection);
}
 
IMPL_LINK_NOARG(SdRotationPropertyBox, implModifyHdl, weld::MetricSpinButton&, void)
{
    updateMenu();
    maModifyHdl.Call(nullptr);
}
 
IMPL_LINK(SdRotationPropertyBox, implMenuSelectHdl, const OUString&, rIdent, void)
{
    auto nValue = mxMetric->get_value(FieldUnit::DEGREE);
    bool bDirection = nValue >= 0;
    if (nValue < 0) nValue = o3tl::saturating_toggle_sign(nValue);
 
    if (rIdent == "clockwise")
        bDirection = true;
    else if (rIdent == "counterclock")
        bDirection = false;
    else
        nValue = rIdent.toInt32();
 
    if( !bDirection )
        nValue = -nValue;
 
    if (nValue != mxMetric->get_value(FieldUnit::DEGREE))
    {
        mxMetric->set_value(nValue, FieldUnit::DEGREE);
        implModifyHdl(*mxMetric);
    }
}
 
void SdRotationPropertyBox::setValue( const Any& rValue, const OUString& )
{
    if (mxMetric)
    {
        double fValue = 0.0;
        rValue >>= fValue;
        ::tools::Long nValue = static_cast<::tools::Long>(fValue);
        mxMetric->set_value(nValue, FieldUnit::DEGREE);
        updateMenu();
    }
}
 
Any SdRotationPropertyBox::getValue()
{
    return Any(static_cast<double>(mxMetric->get_value(FieldUnit::DEGREE)));
}
 
namespace {
 
class SdScalePropertyBox : public SdPropertySubControl
{
public:
    SdScalePropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl);
 
    virtual Any getValue() override;
    virtual void setValue( const Any& rValue, const OUString& ) override;
 
    DECL_LINK(implMenuSelectHdl, const OUString&, void);
    DECL_LINK(implModifyHdl, weld::MetricSpinButton&, void);
 
    void updateMenu();
 
private:
    Link<LinkParamNone*,void> maModifyHdl;
    int                       mnDirection;
 
    std::unique_ptr<weld::MetricSpinButton> mxMetric;
    std::unique_ptr<weld::MenuButton> mxControl;
};
 
}
 
SdScalePropertyBox::SdScalePropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl)
    : SdPropertySubControl(pParent)
    , maModifyHdl( rModifyHdl )
    , mxMetric(mxBuilder->weld_metric_spin_button(u"scale"_ustr, FieldUnit::PERCENT))
    , mxControl(mxBuilder->weld_menu_button(u"scalemenu"_ustr))
{
    mxControl->connect_selected(LINK(this, SdScalePropertyBox, implMenuSelectHdl));
    mxControl->set_help_id(HID_SD_CUSTOMANIMATIONPANE_SCALEPROPERTYBOX);
    mxControl->show();
 
    mxMetric->connect_value_changed(LINK(this, SdScalePropertyBox, implModifyHdl));
    mxMetric->set_help_id(HID_SD_CUSTOMANIMATIONPANE_SCALEPROPERTYBOX);
    mxMetric->show();
    pLabel->set_mnemonic_widget(&mxMetric->get_widget());
 
    setValue(rValue, OUString());
}
 
void SdScalePropertyBox::updateMenu()
{
    auto nValue = mxMetric->get_value(FieldUnit::PERCENT);
 
    mxControl->set_item_active(u"25scale"_ustr, nValue == 25);
    mxControl->set_item_active(u"50scale"_ustr, nValue == 50);
    mxControl->set_item_active(u"150scale"_ustr, nValue == 150);
    mxControl->set_item_active(u"400scale"_ustr, nValue == 400);
 
    mxControl->set_item_active(u"hori"_ustr, mnDirection == 1);
    mxControl->set_item_active(u"vert"_ustr, mnDirection == 2);
    mxControl->set_item_active(u"both"_ustr, mnDirection == 3);
}
 
IMPL_LINK_NOARG(SdScalePropertyBox, implModifyHdl, weld::MetricSpinButton&, void)
{
    updateMenu();
    maModifyHdl.Call(nullptr);
}
 
IMPL_LINK(SdScalePropertyBox, implMenuSelectHdl, const OUString&, rIdent, void)
{
    auto nValue = mxMetric->get_value(FieldUnit::PERCENT);
 
    int nDirection = mnDirection;
 
    if (rIdent == "hori")
        nDirection = 1;
    else if (rIdent == "vert")
        nDirection = 2;
    else if (rIdent == "both")
        nDirection = 3;
    else
        nValue = rIdent.toInt32(); // Getting here indicates a UI bug and should be handled better
 
    bool bModified = false;
 
    if( nDirection != mnDirection )
    {
        mnDirection = nDirection;
        bModified = true;
    }
 
    if (nValue != mxMetric->get_value(FieldUnit::PERCENT))
    {
        mxMetric->set_value(nValue, FieldUnit::PERCENT);
        bModified = true;
    }
 
    if(bModified)
    {
        implModifyHdl(*mxMetric);
        updateMenu();
    }
}
 
void SdScalePropertyBox::setValue(const Any& rValue, const OUString&)
{
    if (!mxMetric)
        return;
 
    ValuePair aValues;
    rValue >>= aValues;
 
    double fValue1 = 0.0;
    double fValue2 = 0.0;
 
    aValues.First >>= fValue1;
    aValues.Second >>= fValue2;
 
    // 'Size' drop down menu set by mnDirection when loading Grow and Shrink Animation
    // Shouldn't compare a float directly to zero... should be fixed with delta epsilon compare
    // Might be better to just have a flag in the content.xml for this
    if( (fValue1 == 0.0) && (fValue2 == 0.0) )
        mnDirection = 3; // assume 'Both' scaling option when both are zero
    else if( (fValue1 != 0.0) && (fValue2 == 0.0) )
        mnDirection = 1;
    else if( (fValue1 == 0.0) && (fValue2 != 0.0) )
        mnDirection = 2;
    else
        mnDirection = 3;
 
    // Grow and Shrink Animation is a relative change with value stored in content.xml under tag
    // smil:by=*,*
    // An offset of 1 must be added to properly translate from content.xml to UI value displayed
    // e.g. if in content.xml smil:by=0.5,0.5 then 1 + (0.5,0.5) = (1.5,1.5) => grow by 150% of the
    // size horizontal and vertical
    // e.g. if in content.xml smil:by=-0.5,-0.5 then 1 + (-0.5,-0.5) = (0.5,0.5) => shrink by 50%
    // of the size horizontal and vertical
    fValue1 += 1;
    fValue2 += 1;
 
    // Determine value from file for UI 'Size' field based on determined mnDirection
    ::tools::Long nValue;
    if( mnDirection == 1 )
        nValue = static_cast<::tools::Long>(fValue1 * 100.0);
    else if( mnDirection == 2 )
        nValue = static_cast<::tools::Long>(fValue2 * 100.0);
    else if( mnDirection == 3 ){
        if (fValue1 >= fValue2)
            nValue = static_cast<::tools::Long>(fValue1 * 100.0);
        else
            nValue = static_cast<::tools::Long>(fValue2 * 100.0);
    }
    else
        nValue = static_cast<::tools::Long>(100.0); // default to 100% in UI if something goes wrong
 
    mxMetric->set_value(nValue, FieldUnit::PERCENT);
    updateMenu();
}
 
Any SdScalePropertyBox::getValue()
{
    double fValue1 = static_cast<double>(mxMetric->get_value(FieldUnit::PERCENT)) / 100.0;
 
    // Grow and Shrink Animation is a relative change with value stored in content.xml under tag
    // smil:by=*,*
    // An offset of 1 must be subtracted to properly translate UI value displayed and save to
    // content.xml
    // e.g. if UI value is 150% then  1.5 - 1 = 0.5 and is set to smil:by=0.5,0.5 in content.xml
    // e.g. if UI value is 50% then  0.5 - 1 = -0.5 and is set to smil:by=-0.5,-0.5 in content.xml
    fValue1 -= 1;
 
    double fValue2 = fValue1;
 
    // mnDirection set by 'Size' drop down menu and used to zero out either horizontal or vertical
    // scaling depending on what option is selected
    if( mnDirection == 1 )
        fValue2 = 0.0;
    else if( mnDirection == 2 )
        fValue1 = 0.0;
 
    ValuePair aValues;
    aValues.First <<= fValue1;
    aValues.Second <<= fValue2;
 
    return Any( aValues );
}
 
namespace {
 
class SdFontStylePropertyBox : public SdPropertySubControl
{
public:
    SdFontStylePropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl);
 
    virtual Any getValue() override;
    virtual void setValue( const Any& rValue, const OUString& ) override;
 
    DECL_LINK(implMenuSelectHdl, const OUString&, void);
 
    void update();
 
private:
    float mfFontWeight;
    awt::FontSlant meFontSlant;
    sal_Int16 mnFontUnderline;
    Link<LinkParamNone*,void> maModifyHdl;
 
    std::unique_ptr<weld::Entry> mxEdit;
    std::unique_ptr<weld::MenuButton> mxControl;
};
 
}
 
SdFontStylePropertyBox::SdFontStylePropertyBox(weld::Label* pLabel, weld::Container* pParent, const Any& rValue, const Link<LinkParamNone*,void>& rModifyHdl )
    : SdPropertySubControl(pParent)
    , maModifyHdl( rModifyHdl )
    , mxEdit(mxBuilder->weld_entry(u"entry"_ustr))
    , mxControl(mxBuilder->weld_menu_button(u"entrymenu"_ustr))
{
    mxEdit->set_text(SdResId(STR_CUSTOMANIMATION_SAMPLE));
    mxEdit->set_help_id(HID_SD_CUSTOMANIMATIONPANE_FONTSTYLEPROPERTYBOX);
    pLabel->set_mnemonic_widget(mxEdit.get());
    mxEdit->show();
 
    mxControl->connect_selected(LINK(this, SdFontStylePropertyBox, implMenuSelectHdl));
    mxControl->set_help_id(HID_SD_CUSTOMANIMATIONPANE_FONTSTYLEPROPERTYBOX);
    mxControl->show();
 
    setValue(rValue, OUString());
}
 
void SdFontStylePropertyBox::update()
{
    // update menu
    mxControl->set_item_active(u"bold"_ustr, mfFontWeight == awt::FontWeight::BOLD);
    mxControl->set_item_active(u"italic"_ustr, meFontSlant == awt::FontSlant_ITALIC);
    mxControl->set_item_active(u"underline"_ustr, mnFontUnderline != awt::FontUnderline::NONE );
 
    // update sample edit
    vcl::Font aFont(mxEdit->get_font());
    aFont.SetWeight(mfFontWeight == awt::FontWeight::BOLD ? WEIGHT_BOLD : WEIGHT_NORMAL);
    aFont.SetItalic(meFontSlant == awt::FontSlant_ITALIC ? ITALIC_NORMAL : ITALIC_NONE);
    aFont.SetUnderline(mnFontUnderline == awt::FontUnderline::NONE ? LINESTYLE_NONE : LINESTYLE_SINGLE);
    mxEdit->set_font(aFont);
}
 
IMPL_LINK(SdFontStylePropertyBox, implMenuSelectHdl, const OUString&, rIdent, void)
{
    if (rIdent == "bold")
    {
        if( mfFontWeight == awt::FontWeight::BOLD )
            mfFontWeight = awt::FontWeight::NORMAL;
        else
            mfFontWeight = awt::FontWeight::BOLD;
    }
    else if (rIdent == "italic")
    {
        if( meFontSlant == awt::FontSlant_ITALIC )
            meFontSlant = awt::FontSlant_NONE;
        else
            meFontSlant = awt::FontSlant_ITALIC;
    }
    else if (rIdent == "underline")
    {
        if( mnFontUnderline == awt::FontUnderline::SINGLE )
            mnFontUnderline = awt::FontUnderline::NONE;
        else
            mnFontUnderline = awt::FontUnderline::SINGLE;
    }
 
    update();
    maModifyHdl.Call(nullptr);
}
 
void SdFontStylePropertyBox::setValue( const Any& rValue, const OUString& )
{
    Sequence<Any> aValues;
    rValue >>= aValues;
 
    aValues[0] >>= mfFontWeight;
    aValues[1] >>= meFontSlant;
    aValues[2] >>= mnFontUnderline;
 
    update();
}
 
Any SdFontStylePropertyBox::getValue()
{
    Sequence<Any> aValues{ Any(mfFontWeight), Any(meFontSlant), Any(mnFontUnderline) };
    return Any( aValues );
}
 
class CustomAnimationEffectTabPage
{
public:
    CustomAnimationEffectTabPage(weld::Container* pParent, weld::Window* pDialog, const STLPropertySet* pSet);
 
    void update( STLPropertySet* pSet );
    DECL_LINK(implSelectHdl, weld::ComboBox&, void);
    DECL_LINK(implClickHdl, weld::Button&, void);
    void implHdl(const weld::Widget*);
 
private:
    void updateControlStates();
    void fillSoundListBox();
    void clearSoundListBox();
    sal_Int32 getSoundObject( std::u16string_view rStr );
    void openSoundFileDialog();
    void onSoundPreview();
    weld::Window* GetFrameWeld() const { return mpDialog; }
 
private:
    ::std::vector< OUString > maSoundList;
    bool mbHasText;
    const STLPropertySet* mpSet;
    css::uno::Reference<css::media::XPlayer> mxPlayer;
 
    weld::Window* mpDialog;
    std::unique_ptr<weld::Builder> mxBuilder;
    std::unique_ptr<weld::Container> mxContainer;
    std::unique_ptr<weld::Widget> mxSettings;
    std::unique_ptr<weld::Label> mxFTProperty1;
    std::unique_ptr<weld::Container> mxPlaceholderBox;
    std::unique_ptr<weld::CheckButton> mxCBSmoothStart;
    std::unique_ptr<weld::CheckButton> mxCBSmoothEnd;
    std::unique_ptr<weld::Label> mxFTSound;
    std::unique_ptr<weld::ComboBox> mxLBSound;
    std::unique_ptr<weld::Button> mxPBSoundPreview;
    std::unique_ptr<weld::ComboBox> mxLBAfterEffect;
    std::unique_ptr<weld::Label> mxFTDimColor;
    std::unique_ptr<ColorListBox> mxCLBDimColor;
    std::unique_ptr<weld::Label> mxFTTextAnim;
    std::unique_ptr<weld::ComboBox> mxLBTextAnim;
    std::unique_ptr<weld::MetricSpinButton> mxMFTextDelay;
    std::unique_ptr<weld::Label> mxFTTextDelay;
    std::unique_ptr<SdPropertySubControl> mxLBSubControl;
};
 
CustomAnimationEffectTabPage::CustomAnimationEffectTabPage(weld::Container* pParent, weld::Window* pDialog, const STLPropertySet* pSet)
    : mbHasText(false)
    , mpSet(pSet)
    , mpDialog(pDialog)
    , mxBuilder(Application::CreateBuilder(pParent, u"modules/simpress/ui/customanimationeffecttab.ui"_ustr))
    , mxContainer(mxBuilder->weld_container(u"EffectTab"_ustr))
    , mxSettings(mxBuilder->weld_widget(u"settings"_ustr))
    , mxFTProperty1(mxBuilder->weld_label(u"prop_label1"_ustr))
    , mxPlaceholderBox(mxBuilder->weld_container(u"placeholder"_ustr))
    , mxCBSmoothStart(mxBuilder->weld_check_button(u"smooth_start"_ustr))
    , mxCBSmoothEnd(mxBuilder->weld_check_button(u"smooth_end"_ustr))
    , mxFTSound(mxBuilder->weld_label(u"sound_label"_ustr))
    , mxLBSound(mxBuilder->weld_combo_box(u"sound_list"_ustr))
    , mxPBSoundPreview(mxBuilder->weld_button(u"sound_preview"_ustr))
    , mxLBAfterEffect(mxBuilder->weld_combo_box(u"aeffect_list"_ustr))
    , mxFTDimColor(mxBuilder->weld_label(u"dim_color_label"_ustr))
    , mxCLBDimColor(new ColorListBox(mxBuilder->weld_menu_button(u"dim_color_list"_ustr), [pDialog]{ return pDialog; }))
    , mxFTTextAnim(mxBuilder->weld_label(u"text_animation_label"_ustr))
    , mxLBTextAnim(mxBuilder->weld_combo_box(u"text_animation_list"_ustr))
    , mxMFTextDelay(mxBuilder->weld_metric_spin_button(u"text_delay"_ustr, FieldUnit::PERCENT))
    , mxFTTextDelay(mxBuilder->weld_label(u"text_delay_label"_ustr))
{
    mxCLBDimColor->SelectEntry(COL_BLACK);
 
    // fill the soundbox
    fillSoundListBox();
 
    mxLBSound->connect_changed(LINK(this, CustomAnimationEffectTabPage, implSelectHdl));
    mxPBSoundPreview->connect_clicked(LINK(this, CustomAnimationEffectTabPage, implClickHdl));
 
    // only show settings if all selected effects have the same preset-id
    if( pSet->getPropertyState( nHandlePresetId ) != STLPropertyState::Ambiguous )
    {
        OUString aPresetId;
        pSet->getPropertyValue( nHandlePresetId ) >>= aPresetId;
 
        // property 1
 
        if( pSet->getPropertyState( nHandleProperty1Type ) != STLPropertyState::Ambiguous )
        {
            sal_Int32 nType = 0;
            pSet->getPropertyValue( nHandleProperty1Type ) >>= nType;
 
            if( nType != nPropertyTypeNone )
            {
                // set ui name for property at fixed text
                OUString aPropertyName( getPropertyName( nType ) );
 
                if( !aPropertyName.isEmpty() )
                {
                    mxSettings->show();
                    mxFTProperty1->set_label(aPropertyName);
                }
 
                // get property value
                const Any aValue( pSet->getPropertyValue( nHandleProperty1Value ) );
 
                // create property sub control
                mxLBSubControl = SdPropertySubControl::create(nType, mxFTProperty1.get(), mxPlaceholderBox.get(), mpDialog, aValue, aPresetId, Link<LinkParamNone*,void>());
            }
        }
 
        mxFTProperty1->set_sensitive(mxPlaceholderBox->get_sensitive());
 
        // accelerate & decelerate
 
        if( pSet->getPropertyState( nHandleAccelerate ) == STLPropertyState::Direct )
        {
            mxCBSmoothStart->show();
            mxCBSmoothEnd->show();
 
            double fTemp = 0.0;
            pSet->getPropertyValue( nHandleAccelerate ) >>= fTemp;
            mxCBSmoothStart->set_active( fTemp > 0.0 );
 
            pSet->getPropertyValue( nHandleDecelerate ) >>= fTemp;
            mxCBSmoothEnd->set_active( fTemp > 0.0 );
        }
    }
 
    // init after effect controls
 
    mxLBAfterEffect->connect_changed(LINK(this, CustomAnimationEffectTabPage, implSelectHdl));
    mxLBTextAnim->connect_changed(LINK(this, CustomAnimationEffectTabPage, implSelectHdl));
 
    if( (pSet->getPropertyState( nHandleHasAfterEffect ) != STLPropertyState::Ambiguous) &&
        (pSet->getPropertyState( nHandleAfterEffectOnNextEffect ) != STLPropertyState::Ambiguous) &&
        (pSet->getPropertyState( nHandleDimColor ) != STLPropertyState::Ambiguous))
    {
        bool bHasAfterEffect = false;
        pSet->getPropertyValue( nHandleHasAfterEffect ) >>= bHasAfterEffect;
 
        sal_Int32 nPos = 0;
        if( bHasAfterEffect )
        {
            nPos++;
 
            bool bAfterEffectOnNextClick = false;
            pSet->getPropertyValue( nHandleAfterEffectOnNextEffect ) >>= bAfterEffectOnNextClick;
            Any aDimColor( pSet->getPropertyValue( nHandleDimColor ) );
 
            if( aDimColor.hasValue() )
            {
                Color aColor;
                aDimColor >>= aColor;
                mxCLBDimColor->SelectEntry(aColor);
            }
            else
            {
                nPos++;
                if( bAfterEffectOnNextClick )
                    nPos++;
            }
        }
 
        mxLBAfterEffect->set_active(nPos);
    }
 
    if( pSet->getPropertyState( nHandleHasText ) != STLPropertyState::Ambiguous )
        pSet->getPropertyValue( nHandleHasText ) >>= mbHasText;
 
    if( mbHasText )
    {
        if( pSet->getPropertyState( nHandleIterateType ) != STLPropertyState::Ambiguous)
        {
            int nPos = -1;
 
            sal_Int32 nIterateType = 0;
            pSet->getPropertyValue( nHandleIterateType ) >>= nIterateType;
            switch( nIterateType )
            {
            case TextAnimationType::BY_PARAGRAPH:   nPos = 0; break;
            case TextAnimationType::BY_WORD:        nPos = 1; break;
            case TextAnimationType::BY_LETTER:      nPos = 2; break;
            }
 
            mxLBTextAnim->set_active(nPos);
        }
 
        if( pSet->getPropertyState( nHandleIterateInterval ) != STLPropertyState::Default )
        {
            double fIterateInterval = 0.0;
            pSet->getPropertyValue( nHandleIterateInterval ) >>= fIterateInterval;
            mxMFTextDelay->set_value(static_cast<::tools::Long>(fIterateInterval*10), FieldUnit::NONE);
        }
    }
    else
    {
        mxFTTextAnim->set_sensitive(false);
        mxLBTextAnim->set_sensitive(false);
        mxMFTextDelay->set_sensitive(false);
        mxFTTextDelay->set_sensitive(false);
 
    }
 
    if( pSet->getPropertyState( nHandleSoundURL ) != STLPropertyState::Ambiguous )
    {
        sal_Int32 nPos = 0;
 
        const Any aValue( pSet->getPropertyValue( nHandleSoundURL ) );
 
        if( aValue.getValueType() == ::cppu::UnoType<sal_Bool>::get() )
        {
            nPos = 1;
        }
        else
        {
            OUString aSoundURL;
            aValue >>= aSoundURL;
 
            if( !aSoundURL.isEmpty() )
            {
                sal_uLong i;
                for( i = 0; i < maSoundList.size(); i++ )
                {
                    OUString aString = maSoundList[ i ];
                    if( aString == aSoundURL )
                    {
                        nPos = static_cast<sal_Int32>(i)+2;
                        break;
                    }
                }
 
                if( nPos == 0 )
                {
                    nPos = static_cast<sal_Int32>(maSoundList.size())+2;
                    maSoundList.push_back( aSoundURL );
                    INetURLObject aURL( aSoundURL );
                    mxLBSound->insert_text(nPos, aURL.GetBase());
                }
            }
        }
 
        if( nPos != -1)
            mxLBSound->set_active(nPos);
    }
 
    updateControlStates();
 
}
 
void CustomAnimationEffectTabPage::updateControlStates()
{
    auto nPos = mxLBAfterEffect->get_active();
    mxCLBDimColor->set_sensitive( nPos == 1 );
    mxFTDimColor->set_sensitive( nPos == 1 );
 
    if( mbHasText )
    {
        nPos = mxLBTextAnim->get_active();
        mxMFTextDelay->set_sensitive( nPos != 0 );
        mxFTTextDelay->set_sensitive( nPos != 0 );
    }
 
    if (comphelper::LibreOfficeKit::isActive())
    {
        mxFTSound->hide();
        mxLBSound->hide();
        mxPBSoundPreview->hide();
    }
    else
    {
        nPos = mxLBSound->get_active();
        mxPBSoundPreview->set_sensitive( nPos >= 2 );
    }
 
}
 
IMPL_LINK(CustomAnimationEffectTabPage, implClickHdl, weld::Button&, rBtn, void)
{
    implHdl(&rBtn);
}
 
IMPL_LINK(CustomAnimationEffectTabPage, implSelectHdl, weld::ComboBox&, rListBox, void)
{
    implHdl(&rListBox);
}
 
void CustomAnimationEffectTabPage::implHdl(const weld::Widget* pControl)
{
    if (pControl == mxLBTextAnim.get())
    {
        if (mxMFTextDelay->get_value(FieldUnit::NONE) == 0)
            mxMFTextDelay->set_value(100, FieldUnit::NONE);
    }
    else if (pControl == mxLBSound.get())
    {
        auto nPos = mxLBSound->get_active();
        if (nPos == (mxLBSound->get_count() - 1))
        {
            openSoundFileDialog();
        }
    }
    else if (pControl == mxPBSoundPreview.get())
    {
        onSoundPreview();
    }
 
    updateControlStates();
}
 
void CustomAnimationEffectTabPage::update( STLPropertySet* pSet )
{
    if (mxLBSubControl)
    {
        Any aNewValue(mxLBSubControl->getValue());
        Any aOldValue;
        if( mpSet->getPropertyState( nHandleProperty1Value ) != STLPropertyState::Ambiguous)
            aOldValue = mpSet->getPropertyValue( nHandleProperty1Value );
 
        if( aOldValue != aNewValue )
            pSet->setPropertyValue( nHandleProperty1Value, aNewValue );
    }
 
    if (mxCBSmoothStart->get_visible())
    {
        // set selected value for accelerate if different than in original set
 
        double fTemp = mxCBSmoothStart->get_active() ? 0.5 : 0.0;
 
        double fOldTemp = 0.0;
        if(mpSet->getPropertyState( nHandleAccelerate ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleAccelerate ) >>= fOldTemp;
        else
            fOldTemp = -2.0;
 
        if( fOldTemp != fTemp )
            pSet->setPropertyValue( nHandleAccelerate, Any( fTemp ) );
 
        // set selected value for decelerate if different than in original set
        fTemp = mxCBSmoothEnd->get_active() ? 0.5 : 0.0;
 
        if(mpSet->getPropertyState( nHandleDecelerate ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleDecelerate ) >>= fOldTemp;
        else
            fOldTemp = -2.0;
 
        if( fOldTemp != fTemp )
            pSet->setPropertyValue( nHandleDecelerate, Any( fTemp ) );
    }
 
    auto nPos = mxLBAfterEffect->get_active();
    if (nPos != -1)
    {
        bool bAfterEffect = nPos != 0;
 
        bool bOldAfterEffect = false;
 
        if(mpSet->getPropertyState( nHandleHasAfterEffect ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleHasAfterEffect ) >>= bOldAfterEffect;
        else
            bOldAfterEffect = !bAfterEffect;
 
        if( bOldAfterEffect != bAfterEffect )
            pSet->setPropertyValue( nHandleHasAfterEffect, Any( bAfterEffect ) );
 
        Any aDimColor;
        if( nPos == 1 )
        {
            Color aSelectedColor = mxCLBDimColor->GetSelectEntryColor();
            aDimColor <<= aSelectedColor.GetRGBColor();
        }
 
        if( (mpSet->getPropertyState( nHandleDimColor ) == STLPropertyState::Ambiguous) ||
            (mpSet->getPropertyValue( nHandleDimColor ) != aDimColor) )
            pSet->setPropertyValue( nHandleDimColor, aDimColor );
 
        bool bAfterEffectOnNextEffect = nPos != 2;
        bool bOldAfterEffectOnNextEffect = !bAfterEffectOnNextEffect;
 
        if( mpSet->getPropertyState( nHandleAfterEffectOnNextEffect ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleAfterEffectOnNextEffect ) >>= bOldAfterEffectOnNextEffect;
 
        if( bAfterEffectOnNextEffect != bOldAfterEffectOnNextEffect )
            pSet->setPropertyValue( nHandleAfterEffectOnNextEffect, Any( bAfterEffectOnNextEffect ) );
    }
 
    nPos = mxLBTextAnim->get_active();
    if (nPos != -1)
    {
        sal_Int16 nIterateType;
 
        switch( nPos )
        {
        case 1: nIterateType = TextAnimationType::BY_WORD; break;
        case 2: nIterateType = TextAnimationType::BY_LETTER; break;
        default:
            nIterateType = TextAnimationType::BY_PARAGRAPH;
        }
 
        sal_Int16 nOldIterateType = nIterateType-1;
 
        if(mpSet->getPropertyState( nHandleIterateType ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleIterateType ) >>= nOldIterateType;
 
        if( nIterateType != nOldIterateType )
            pSet->setPropertyValue( nHandleIterateType, Any( nIterateType ) );
    }
 
    {
        double fIterateInterval = static_cast<double>(mxMFTextDelay->get_value(FieldUnit::NONE)) / 10;
        double fOldIterateInterval = -1.0;
 
        if( mpSet->getPropertyState( nHandleIterateInterval ) != STLPropertyState::Ambiguous )
            mpSet->getPropertyValue( nHandleIterateInterval ) >>= fOldIterateInterval;
 
        if( fIterateInterval != fOldIterateInterval )
            pSet->setPropertyValue( nHandleIterateInterval, Any( fIterateInterval ) );
    }
 
    nPos = mxLBSound->get_active();
    if (nPos == -1)
        return;
 
    Any aNewSoundURL, aOldSoundURL( Any( sal_Int32(0) ) );
 
    if( nPos == 0 )
    {
        // 0 means no sound, so leave any empty
    }
    else if( nPos == 1 )
    {
        // this means stop sound
        aNewSoundURL <<= true;
    }
    else
    {
        OUString aSoundURL( maSoundList[ nPos-2 ] );
        aNewSoundURL <<= aSoundURL;
    }
 
    if( mpSet->getPropertyState( nHandleSoundURL ) != STLPropertyState::Ambiguous )
        aOldSoundURL = mpSet->getPropertyValue( nHandleSoundURL  );
 
    if( aNewSoundURL != aOldSoundURL )
        pSet->setPropertyValue( nHandleSoundURL, aNewSoundURL );
}
 
void CustomAnimationEffectTabPage::fillSoundListBox()
{
    GalleryExplorer::FillObjList( GALLERY_THEME_SOUNDS, maSoundList );
    GalleryExplorer::FillObjList( GALLERY_THEME_USERSOUNDS, maSoundList );
 
    mxLBSound->append_text( SdResId(STR_CUSTOMANIMATION_NO_SOUND) );
    mxLBSound->append_text( SdResId(STR_CUSTOMANIMATION_STOP_PREVIOUS_SOUND) );
    for(const OUString & rString : maSoundList)
    {
        INetURLObject aURL( rString );
        mxLBSound->append_text( aURL.GetBase() );
    }
    mxLBSound->append_text( SdResId(STR_CUSTOMANIMATION_BROWSE_SOUND) );
}
 
void CustomAnimationEffectTabPage::clearSoundListBox()
{
    maSoundList.clear();
    mxLBSound->clear();
}
 
sal_Int32 CustomAnimationEffectTabPage::getSoundObject( std::u16string_view rStr )
{
    size_t i;
    const size_t nCount = maSoundList.size();
    for( i = 0; i < nCount; i++ )
    {
        if( maSoundList[ i ].equalsIgnoreAsciiCase(rStr) )
            return i+2;
    }
 
    return -1;
}
 
void CustomAnimationEffectTabPage::openSoundFileDialog()
{
    SdOpenSoundFileDialog aFileDialog(GetFrameWeld());
 
    bool bValidSoundFile = false;
    bool bQuitLoop = false;
    ::tools::Long nPos = 0;
 
    while( !bQuitLoop && (aFileDialog.Execute() == ERRCODE_NONE) )
    {
        OUString aFile = aFileDialog.GetPath();
        nPos = getSoundObject( aFile );
 
        if( nPos < 0 ) // not in Soundliste
        {
            // try to insert in Gallery
            if( GalleryExplorer::InsertURL( GALLERY_THEME_USERSOUNDS, aFile ) )
            {
                clearSoundListBox();
                fillSoundListBox();
 
                nPos = getSoundObject( aFile );
                DBG_ASSERT( nPos >= 0, "sd::CustomAnimationEffectTabPage::openSoundFileDialog(), Recently inserted sound not in list!" );
 
                bValidSoundFile=true;
                bQuitLoop=true;
            }
            else
            {
                OUString aStrWarning(SdResId(STR_WARNING_NOSOUNDFILE));
                aStrWarning = aStrWarning.replaceFirst("%", aFile);
                std::unique_ptr<weld::MessageDialog> xWarn(Application::CreateMessageDialog(nullptr,
                                                           VclMessageType::Warning, VclButtonsType::NONE,
                                                           aStrWarning));
                xWarn->add_button(GetStandardText(StandardButtonType::Retry), RET_RETRY);
                xWarn->add_button(GetStandardText(StandardButtonType::Cancel), RET_CANCEL);
                bQuitLoop = xWarn->run() != RET_RETRY;
 
                bValidSoundFile=false;
            }
        }
        else
        {
            bValidSoundFile=true;
            bQuitLoop=true;
        }
    }
 
    if( !bValidSoundFile )
        nPos = 0;
 
    mxLBSound->set_active(nPos);
}
 
void CustomAnimationEffectTabPage::onSoundPreview()
{
#if HAVE_FEATURE_AVMEDIA
    const auto nPos = mxLBSound->get_active();
 
    if( nPos >= 2 ) try
    {
        const OUString aSoundURL( maSoundList[ nPos-2 ] );
        mxPlayer.set( avmedia::MediaWindow::createPlayer( aSoundURL, u""_ustr ), uno::UNO_SET_THROW );
        mxPlayer->start();
    }
    catch( uno::Exception& )
    {
        TOOLS_WARN_EXCEPTION( "sd", "CustomAnimationEffectTabPage::onSoundPreview()" );
    }
#endif
}
 
class CustomAnimationDurationTabPage
{
public:
    CustomAnimationDurationTabPage(weld::Container* pParent, const STLPropertySet* pSet);
 
    void update( STLPropertySet* pSet );
 
    DECL_LINK(implControlHdl, weld::ComboBox&, void);
    DECL_LINK(DurationModifiedHdl, weld::MetricSpinButton&, void);
 
private:
    const STLPropertySet* mpSet;
 
    std::unique_ptr<weld::Builder> mxBuilder;
    std::unique_ptr<weld::Container> mxContainer;
    std::unique_ptr<weld::ComboBox> mxLBStart;
    std::unique_ptr<weld::MetricSpinButton> mxMFStartDelay;
    std::unique_ptr<weld::Label> mxFTDuration;
    std::unique_ptr<weld::MetricSpinButton> mxCBXDuration;
    std::unique_ptr<weld::Label> mxFTRepeat;
    std::unique_ptr<weld::ComboBox> mxCBRepeat;
    std::unique_ptr<weld::CheckButton> mxCBXRewind;
    std::unique_ptr<weld::RadioButton> mxRBClickSequence;
    std::unique_ptr<weld::RadioButton> mxRBInteractive;
    std::unique_ptr<weld::ComboBox> mxLBTrigger;
};
 
CustomAnimationDurationTabPage::CustomAnimationDurationTabPage(weld::Container* pParent, const STLPropertySet* pSet)
    : mpSet(pSet)
    , mxBuilder(Application::CreateBuilder(pParent, u"modules/simpress/ui/customanimationtimingtab.ui"_ustr))
    , mxContainer(mxBuilder->weld_container(u"TimingTab"_ustr))
    , mxLBStart(mxBuilder->weld_combo_box(u"start_list"_ustr))
    , mxMFStartDelay(mxBuilder->weld_metric_spin_button(u"delay_value"_ustr, FieldUnit::SECOND))
    , mxFTDuration(mxBuilder->weld_label(u"duration_label"_ustr))
    , mxCBXDuration(mxBuilder->weld_metric_spin_button(u"anim_duration"_ustr, FieldUnit::SECOND))
    , mxFTRepeat(mxBuilder->weld_label(u"repeat_label"_ustr))
    , mxCBRepeat(mxBuilder->weld_combo_box(u"repeat_list"_ustr))
    , mxCBXRewind(mxBuilder->weld_check_button(u"rewind"_ustr))
    , mxRBClickSequence(mxBuilder->weld_radio_button(u"rb_click_sequence"_ustr))
    , mxRBInteractive(mxBuilder->weld_radio_button(u"rb_interactive"_ustr))
    , mxLBTrigger(mxBuilder->weld_combo_box(u"trigger_list"_ustr))
{
    mxLBTrigger->set_size_request(mxLBTrigger->get_approximate_digit_width() * 20, -1);
 
    fillRepeatComboBox(*mxCBRepeat);
 
    mxLBTrigger->connect_changed(LINK(this, CustomAnimationDurationTabPage, implControlHdl));
    mxCBXDuration->connect_value_changed(LINK( this, CustomAnimationDurationTabPage, DurationModifiedHdl));
 
    if( pSet->getPropertyState( nHandleStart ) != STLPropertyState::Ambiguous )
    {
        sal_Int16 nStart = 0;
        pSet->getPropertyValue( nHandleStart ) >>= nStart;
        sal_Int32 nPos = 0;
        switch( nStart )
        {
            case EffectNodeType::WITH_PREVIOUS:     nPos = 1; break;
            case EffectNodeType::AFTER_PREVIOUS:    nPos = 2; break;
        }
        mxLBStart->set_active(nPos);
    }
 
    if( pSet->getPropertyState( nHandleBegin ) != STLPropertyState::Ambiguous )
    {
        double fBegin = 0.0;
        pSet->getPropertyValue( nHandleBegin ) >>= fBegin;
        mxMFStartDelay->set_value(static_cast<::tools::Long>(fBegin*10), FieldUnit::NONE);
    }
 
    if( pSet->getPropertyState( nHandleDuration ) != STLPropertyState::Ambiguous )
    {
        double fDuration = 0.0;
        pSet->getPropertyValue( nHandleDuration ) >>= fDuration;
 
        if( fDuration == 0.001 )
        {
            mxFTDuration->set_sensitive(false);
            mxCBXDuration->set_sensitive(false);
            mxFTRepeat->set_sensitive(false);
            mxCBRepeat->set_sensitive(false);
            mxCBXRewind->set_sensitive(false);
        }
        else
        {
            mxCBXDuration->set_value(fDuration * 100.0, FieldUnit::NONE);
        }
    }
 
    if( pSet->getPropertyState( nHandleRepeat ) != STLPropertyState::Ambiguous )
    {
        Any aRepeatCount( pSet->getPropertyValue( nHandleRepeat ) );
        if( (aRepeatCount.getValueType() == ::cppu::UnoType<double>::get()) || !aRepeatCount.hasValue() )
        {
            double fRepeat = 0.0;
            if( aRepeatCount.hasValue() )
                aRepeatCount >>= fRepeat;
 
            auto nPos = -1;
 
            if( fRepeat == 0 )
                nPos = 0;
            else if( fRepeat == 2.0 )
                nPos = 1;
            else if( fRepeat == 3.0 )
                nPos = 2;
            else if( fRepeat == 4.0 )
                nPos = 3;
            else if( fRepeat == 5.0 )
                nPos = 4;
            else if( fRepeat == 10.0 )
                nPos = 5;
 
            if (nPos != -1)
                mxCBRepeat->set_active(nPos);
            else
                mxCBRepeat->set_entry_text(OUString::number(fRepeat));
        }
        else if( aRepeatCount.getValueType() == ::cppu::UnoType<Timing>::get() )
        {
            Any aEnd;
            if( pSet->getPropertyState( nHandleEnd ) != STLPropertyState::Ambiguous )
                aEnd = pSet->getPropertyValue( nHandleEnd );
 
            mxCBRepeat->set_active(aEnd.hasValue() ? 6 : 7);
        }
    }
 
    if( pSet->getPropertyState( nHandleRewind ) != STLPropertyState::Ambiguous )
    {
        sal_Int16 nFill = 0;
        if( pSet->getPropertyValue( nHandleRewind ) >>= nFill )
        {
            mxCBXRewind->set_active(nFill == AnimationFill::REMOVE);
        }
        else
        {
            mxCBXRewind->set_state(TRISTATE_INDET);
        }
    }
 
    Reference< XShape > xTrigger;
 
    if( pSet->getPropertyState( nHandleTrigger ) != STLPropertyState::Ambiguous )
    {
        pSet->getPropertyValue( nHandleTrigger ) >>= xTrigger;
 
        mxRBInteractive->set_active(xTrigger.is());
        mxRBClickSequence->set_active(!xTrigger.is());
    }
 
    Reference< XDrawPage > xCurrentPage;
    pSet->getPropertyValue( nHandleCurrentPage ) >>= xCurrentPage;
    if( !xCurrentPage.is() )
        return;
 
    static constexpr OUString aStrIsEmptyPresObj( u"IsEmptyPresentationObject"_ustr );
 
    sal_Int32 nShape, nCount = xCurrentPage->getCount();
    for( nShape = 0; nShape < nCount; nShape++ )
    {
        Reference< XShape > xShape( xCurrentPage->getByIndex( nShape ), UNO_QUERY );
 
        if( !xShape.is() )
            continue;
 
        Reference< XPropertySet > xSet( xShape, UNO_QUERY );
        if( xSet.is() && xSet->getPropertySetInfo()->hasPropertyByName( aStrIsEmptyPresObj ) )
        {
            bool bIsEmpty = false;
            xSet->getPropertyValue( aStrIsEmptyPresObj ) >>= bIsEmpty;
            if( bIsEmpty )
                continue;
        }
 
        OUString aDescription( getShapeDescription( xShape, true ) );
        mxLBTrigger->append(OUString::number(nShape), aDescription);
        auto nPos = mxLBTrigger->get_count() - 1;
        if (xShape == xTrigger)
            mxLBTrigger->set_active(nPos);
    }
}
 
IMPL_LINK_NOARG(CustomAnimationDurationTabPage, implControlHdl, weld::ComboBox&, void)
{
    mxRBInteractive->set_active(true);
    assert(!mxRBClickSequence->get_active());
}
 
IMPL_LINK_NOARG(CustomAnimationDurationTabPage, DurationModifiedHdl, weld::MetricSpinButton&, void)
{
    if (!mxCBXDuration->get_text().isEmpty())
    {
        double duration_value = static_cast<double>(mxCBXDuration->get_value(FieldUnit::NONE));
        if(duration_value <= 0.0)
            mxCBXDuration->set_value(1, FieldUnit::NONE);
        else
            mxCBXDuration->set_value(duration_value, FieldUnit::NONE);
    }
}
 
void CustomAnimationDurationTabPage::update( STLPropertySet* pSet )
{
    auto nPos = mxLBStart->get_active();
    if (nPos != -1)
    {
        sal_Int16 nStart;
        sal_Int16 nOldStart = -1;
 
        switch( nPos )
        {
        case 1: nStart = EffectNodeType::WITH_PREVIOUS; break;
        case 2: nStart = EffectNodeType::AFTER_PREVIOUS; break;
        default:
            nStart = EffectNodeType::ON_CLICK; break;
        }
 
        if(mpSet->getPropertyState( nHandleStart ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleStart ) >>= nOldStart;
 
        if( nStart != nOldStart )
            pSet->setPropertyValue( nHandleStart, Any( nStart ) );
    }
 
    {
        double fBegin = static_cast<double>(mxMFStartDelay->get_value(FieldUnit::NONE)) / 10.0;
        double fOldBegin = -1.0;
 
        if( mpSet->getPropertyState( nHandleBegin ) != STLPropertyState::Ambiguous )
            mpSet->getPropertyValue( nHandleBegin ) >>= fOldBegin;
 
        if( fBegin != fOldBegin )
            pSet->setPropertyValue( nHandleBegin, Any( fBegin ) );
    }
 
    nPos = mxCBRepeat->get_active();
    if (nPos != -1 || !mxCBRepeat->get_active_text().isEmpty())
    {
        Any aRepeatCount;
        Any aEnd;
 
        switch( nPos )
        {
        case 0:
            break;
 
        case 6:
            {
                Event aEvent;
                aEvent.Trigger = EventTrigger::ON_NEXT;
                aEvent.Repeat = 0;
                aEnd <<= aEvent;
            }
            [[fallthrough]];
        case 7:
            aRepeatCount <<= Timing_INDEFINITE;
            break;
        default:
            {
                OUString aText(mxCBRepeat->get_text(nPos));
                if( !aText.isEmpty() )
                    aRepeatCount <<= aText.toDouble();
            }
        }
 
        Any aOldRepeatCount( aRepeatCount );
        if( mpSet->getPropertyState( nHandleRepeat ) != STLPropertyState::Ambiguous )
            aOldRepeatCount = mpSet->getPropertyValue( nHandleRepeat );
 
        if( aRepeatCount != aOldRepeatCount )
            pSet->setPropertyValue( nHandleRepeat, aRepeatCount );
 
        Any aOldEnd( aEnd );
        if( mpSet->getPropertyState( nHandleEnd ) != STLPropertyState::Ambiguous )
            aOldEnd = mpSet->getPropertyValue( nHandleEnd );
 
        if( aEnd != aOldEnd )
            pSet->setPropertyValue( nHandleEnd, aEnd );
    }
 
    double fDuration = -1.0;
 
    if (!mxCBXDuration->get_text().isEmpty())
    {
        double duration_value = static_cast<double>(mxCBXDuration->get_value(FieldUnit::NONE));
 
        if(duration_value > 0)
            fDuration = duration_value/100.0;
    }
 
    if( fDuration != -1.0 )
    {
        double fOldDuration = -1;
 
        if( mpSet->getPropertyState( nHandleDuration ) != STLPropertyState::Ambiguous )
            mpSet->getPropertyValue( nHandleDuration ) >>= fOldDuration;
 
        if( fDuration != fOldDuration )
            pSet->setPropertyValue( nHandleDuration, Any( fDuration ) );
    }
 
    if (mxCBXRewind->get_state() != TRISTATE_INDET)
    {
        sal_Int16 nFill = mxCBXRewind->get_active() ? AnimationFill::REMOVE : AnimationFill::HOLD;
 
        bool bSet = true;
 
        if( mpSet->getPropertyState( nHandleRewind ) != STLPropertyState::Ambiguous )
        {
            sal_Int16 nOldFill = 0;
            mpSet->getPropertyValue( nHandleRewind ) >>= nOldFill;
            bSet = nFill != nOldFill;
        }
 
        if( bSet )
            pSet->setPropertyValue( nHandleRewind, Any( nFill ) );
    }
 
    Reference< XShape > xTrigger;
 
    if (mxRBInteractive->get_active())
    {
        nPos = mxLBTrigger->get_active();
        if (nPos != -1)
        {
            sal_Int32 nShape = mxLBTrigger->get_id(nPos).toInt32();
 
            Reference< XDrawPage > xCurrentPage;
            mpSet->getPropertyValue( nHandleCurrentPage ) >>= xCurrentPage;
 
            if( xCurrentPage.is() && (nShape >= 0) && (nShape < xCurrentPage->getCount()) )
                xCurrentPage->getByIndex( nShape ) >>= xTrigger;
        }
    }
 
    if (xTrigger.is() || mxRBClickSequence->get_active())
    {
        Any aNewValue( xTrigger );
        Any aOldValue;
 
        if( mpSet->getPropertyState( nHandleTrigger ) != STLPropertyState::Ambiguous )
            aOldValue = mpSet->getPropertyValue( nHandleTrigger );
 
        if( aNewValue != aOldValue )
            pSet->setPropertyValue( nHandleTrigger, aNewValue );
    }
}
 
class CustomAnimationTextAnimTabPage
{
public:
    CustomAnimationTextAnimTabPage(weld::Container* pParent, const STLPropertySet* pSet);
 
    void update( STLPropertySet* pSet );
 
    void updateControlStates();
    DECL_LINK(implSelectHdl, weld::ComboBox&, void);
 
private:
    const STLPropertySet* mpSet;
    bool mbHasVisibleShapes;
 
    std::unique_ptr<weld::Builder> mxBuilder;
    std::unique_ptr<weld::Container> mxContainer;
    std::unique_ptr<weld::ComboBox> mxLBGroupText;
    std::unique_ptr<weld::CheckButton> mxCBXGroupAuto;
    std::unique_ptr<weld::MetricSpinButton> mxMFGroupAuto;
    std::unique_ptr<weld::CheckButton> mxCBXAnimateForm;
    std::unique_ptr<weld::CheckButton> mxCBXReverse;
};
 
CustomAnimationTextAnimTabPage::CustomAnimationTextAnimTabPage(weld::Container* pParent, const STLPropertySet* pSet)
    : mpSet(pSet)
    , mbHasVisibleShapes(true)
    , mxBuilder(Application::CreateBuilder(pParent, u"modules/simpress/ui/customanimationtexttab.ui"_ustr))
    , mxContainer(mxBuilder->weld_container(u"TextAnimationTab"_ustr))
    , mxLBGroupText(mxBuilder->weld_combo_box(u"group_text_list"_ustr))
    , mxCBXGroupAuto(mxBuilder->weld_check_button(u"auto_after"_ustr))
    , mxMFGroupAuto(mxBuilder->weld_metric_spin_button(u"auto_after_value"_ustr,FieldUnit::SECOND))
    , mxCBXAnimateForm(mxBuilder->weld_check_button(u"animate_shape"_ustr))
    , mxCBXReverse(mxBuilder->weld_check_button(u"reverse_order"_ustr))
{
    mxLBGroupText->connect_changed(LINK(this, CustomAnimationTextAnimTabPage, implSelectHdl));
 
    if( pSet->getPropertyState( nHandleTextGrouping ) != STLPropertyState::Ambiguous )
    {
        sal_Int32 nTextGrouping = 0;
        if( pSet->getPropertyValue( nHandleTextGrouping ) >>= nTextGrouping )
            mxLBGroupText->set_active(nTextGrouping + 1);
    }
 
    if( pSet->getPropertyState( nHandleHasVisibleShape ) != STLPropertyState::Ambiguous )
        pSet->getPropertyValue( nHandleHasVisibleShape ) >>= mbHasVisibleShapes;
 
    if( pSet->getPropertyState( nHandleTextGroupingAuto ) != STLPropertyState::Ambiguous )
    {
        double fTextGroupingAuto = 0.0;
        if( pSet->getPropertyValue( nHandleTextGroupingAuto ) >>= fTextGroupingAuto )
        {
            mxCBXGroupAuto->set_active(fTextGroupingAuto >= 0.0);
            if( fTextGroupingAuto >= 0.0 )
                mxMFGroupAuto->set_value(static_cast<::tools::Long>(fTextGroupingAuto*10), FieldUnit::NONE);
        }
    }
    else
    {
        mxCBXGroupAuto->set_state( TRISTATE_INDET );
    }
 
    mxCBXAnimateForm->set_state( TRISTATE_INDET );
    if( pSet->getPropertyState( nHandleAnimateForm ) != STLPropertyState::Ambiguous )
    {
        bool bAnimateForm = false;
        if( pSet->getPropertyValue( nHandleAnimateForm ) >>= bAnimateForm )
        {
            mxCBXAnimateForm->set_active( bAnimateForm );
        }
    }
    else
    {
        mxCBXAnimateForm->set_sensitive(false);
    }
 
    mxCBXReverse->set_state(TRISTATE_INDET);
    if( pSet->getPropertyState( nHandleTextReverse ) != STLPropertyState::Ambiguous )
    {
        bool bTextReverse = false;
        if( pSet->getPropertyValue( nHandleTextReverse ) >>= bTextReverse )
        {
            mxCBXReverse->set_active( bTextReverse );
        }
    }
 
    if( pSet->getPropertyState( nHandleMaxParaDepth ) == STLPropertyState::Direct )
    {
        sal_Int32 nMaxParaDepth = 0;
        pSet->getPropertyValue( nHandleMaxParaDepth ) >>= nMaxParaDepth;
        nMaxParaDepth += 1;
 
        sal_Int32 nPos = 6;
        while( (nPos > 2) && (nPos > nMaxParaDepth) )
        {
            mxLBGroupText->remove(nPos);
            nPos--;
        }
    }
 
    updateControlStates();
}
 
void CustomAnimationTextAnimTabPage::update( STLPropertySet* pSet )
{
    auto nPos = mxLBGroupText->get_active();
    if (nPos != -1)
    {
        sal_Int32 nTextGrouping = nPos - 1;
        sal_Int32 nOldGrouping = -2;
 
        if(mpSet->getPropertyState( nHandleTextGrouping ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleTextGrouping ) >>= nOldGrouping;
 
        if( nTextGrouping != nOldGrouping )
            pSet->setPropertyValue( nHandleTextGrouping, Any( nTextGrouping ) );
    }
 
    if (nPos != 0)
    {
        bool bTextReverse = mxCBXReverse->get_active();
        bool bOldTextReverse = !bTextReverse;
 
        if(mpSet->getPropertyState( nHandleTextReverse ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleTextReverse ) >>= bOldTextReverse;
 
        if( bTextReverse != bOldTextReverse )
            pSet->setPropertyValue( nHandleTextReverse, Any( bTextReverse ) );
 
        if( nPos > 1 )
        {
            double fTextGroupingAuto = mxCBXGroupAuto->get_active() ? mxMFGroupAuto->get_value(FieldUnit::NONE) / 10.0 : -1.0;
            double fOldTextGroupingAuto = -2.0;
 
            if(mpSet->getPropertyState( nHandleTextGroupingAuto ) != STLPropertyState::Ambiguous)
                mpSet->getPropertyValue( nHandleTextGroupingAuto ) >>= fOldTextGroupingAuto;
 
            if( fTextGroupingAuto != fOldTextGroupingAuto )
                pSet->setPropertyValue( nHandleTextGroupingAuto, Any( fTextGroupingAuto ) );
        }
    }
    //#i120049# impress crashes when modifying the "Random effects" animation
    //effect's trigger condition to "Start effect on click of".
    //If this control is disabled, we should ignore its value
    if (mxCBXAnimateForm->get_sensitive())
    {
        bool bAnimateForm = mxCBXAnimateForm->get_active();
        bool bOldAnimateForm = !bAnimateForm;
 
        if(mpSet->getPropertyState( nHandleAnimateForm ) != STLPropertyState::Ambiguous)
            mpSet->getPropertyValue( nHandleAnimateForm ) >>= bOldAnimateForm;
 
        if( bAnimateForm != bOldAnimateForm )
            pSet->setPropertyValue( nHandleAnimateForm, Any( bAnimateForm ) );
    }
}
 
void CustomAnimationTextAnimTabPage::updateControlStates()
{
    auto nPos = mxLBGroupText->get_active();
 
    mxCBXGroupAuto->set_sensitive( nPos > 1 );
    mxMFGroupAuto->set_sensitive( nPos > 1 );
    mxCBXReverse->set_sensitive( nPos > 0 );
 
    if( !mbHasVisibleShapes && nPos > 0 )
    {
        mxCBXAnimateForm->set_active(false);
        mxCBXAnimateForm->set_sensitive(false);
    }
    else
    {
        mxCBXAnimateForm->set_sensitive(true);
    }
}
 
IMPL_LINK_NOARG(CustomAnimationTextAnimTabPage, implSelectHdl, weld::ComboBox&, void)
{
    updateControlStates();
}
 
CustomAnimationDialog::CustomAnimationDialog(weld::Window* pParent, std::unique_ptr<STLPropertySet> pSet, const OUString& rPage)
    : GenericDialogController(pParent, u"modules/simpress/ui/customanimationproperties.ui"_ustr, u"CustomAnimationProperties"_ustr)
    , mxSet(std::move(pSet))
    , mxTabControl(m_xBuilder->weld_notebook(u"tabcontrol"_ustr))
    , mxDurationTabPage(new CustomAnimationDurationTabPage(mxTabControl->get_page(u"timing"_ustr), mxSet.get()))
    , mxEffectTabPage(new CustomAnimationEffectTabPage(mxTabControl->get_page(u"effect"_ustr), m_xDialog.get(), mxSet.get()))
{
    bool bHasText = false;
    if( mxSet->getPropertyState( nHandleHasText ) != STLPropertyState::Ambiguous )
        mxSet->getPropertyValue( nHandleHasText ) >>= bHasText;
 
    if( bHasText )
    {
        mxTextAnimTabPage.reset(new CustomAnimationTextAnimTabPage(mxTabControl->get_page(u"textanim"_ustr), mxSet.get()));
    }
    else
    {
        mxTabControl->remove_page(u"textanim"_ustr);
    }
 
    if (!rPage.isEmpty())
        mxTabControl->set_current_page(rPage);
}
 
CustomAnimationDialog::~CustomAnimationDialog()
{
}
 
STLPropertySet* CustomAnimationDialog::getResultSet()
{
    mxResultSet = createDefaultSet();
 
    mxEffectTabPage->update( mxResultSet.get() );
    mxDurationTabPage->update( mxResultSet.get() );
    if (mxTextAnimTabPage)
        mxTextAnimTabPage->update( mxResultSet.get() );
 
    return mxResultSet.get();
}
 
std::unique_ptr<STLPropertySet> CustomAnimationDialog::createDefaultSet()
{
    Any aEmpty;
 
    std::unique_ptr<STLPropertySet> pSet(new STLPropertySet());
    pSet->setPropertyDefaultValue( nHandleMaxParaDepth, Any( sal_Int32(-1) ) );
 
    pSet->setPropertyDefaultValue( nHandleHasAfterEffect, Any( false ) );
    pSet->setPropertyDefaultValue( nHandleAfterEffectOnNextEffect, Any( false ) );
    pSet->setPropertyDefaultValue( nHandleDimColor, aEmpty );
    pSet->setPropertyDefaultValue( nHandleIterateType, Any( sal_Int16(0) ) );
    pSet->setPropertyDefaultValue( nHandleIterateInterval, Any( 0.0 ) );
 
    pSet->setPropertyDefaultValue( nHandleStart, Any( sal_Int16(EffectNodeType::ON_CLICK) ) );
    pSet->setPropertyDefaultValue( nHandleBegin, Any( 0.0 ) );
    pSet->setPropertyDefaultValue( nHandleDuration, Any( 2.0 ) );
    pSet->setPropertyDefaultValue( nHandleRepeat, aEmpty );
    pSet->setPropertyDefaultValue( nHandleRewind, Any( AnimationFill::HOLD ) );
 
    pSet->setPropertyDefaultValue( nHandleEnd, aEmpty );
 
    pSet->setPropertyDefaultValue( nHandlePresetId, aEmpty );
    pSet->setPropertyDefaultValue( nHandleProperty1Type, Any( nPropertyTypeNone ) );
    pSet->setPropertyDefaultValue( nHandleProperty1Value, aEmpty );
    pSet->setPropertyDefaultValue( nHandleProperty2Type, Any( nPropertyTypeNone ) );
    pSet->setPropertyDefaultValue( nHandleProperty2Value, aEmpty );
    pSet->setPropertyDefaultValue( nHandleAccelerate, aEmpty );
    pSet->setPropertyDefaultValue( nHandleDecelerate, aEmpty );
    pSet->setPropertyDefaultValue( nHandleAutoReverse, aEmpty );
    pSet->setPropertyDefaultValue( nHandleTrigger, aEmpty );
 
    pSet->setPropertyDefaultValue( nHandleHasText, Any( false ) );
    pSet->setPropertyDefaultValue( nHandleHasVisibleShape, Any( false ) );
    pSet->setPropertyDefaultValue( nHandleTextGrouping, Any( sal_Int32(-1) ) );
    pSet->setPropertyDefaultValue( nHandleAnimateForm, Any( true ) );
    pSet->setPropertyDefaultValue( nHandleTextGroupingAuto, Any( -1.0 ) );
    pSet->setPropertyDefaultValue( nHandleTextReverse, Any( false ) );
 
    pSet->setPropertyDefaultValue( nHandleCurrentPage, aEmpty );
 
    pSet->setPropertyDefaultValue( nHandleSoundURL, aEmpty );
    pSet->setPropertyDefaultValue( nHandleSoundVolume, Any( 1.0) );
    pSet->setPropertyDefaultValue( nHandleSoundEndAfterSlide, Any( sal_Int32(0) ) );
 
    pSet->setPropertyDefaultValue( nHandleCommand, Any( sal_Int16(0) ) );
    return pSet;
}
 
std::unique_ptr<SdPropertySubControl> SdPropertySubControl::create(sal_Int32 nType, weld::Label* pLabel, weld::Container* pParent, weld::Window* pTopLevel, const Any& rValue, const OUString& rPresetId, const Link<LinkParamNone*,void>& rModifyHdl)
{
    std::unique_ptr<SdPropertySubControl> pSubControl;
    switch( nType )
    {
    case nPropertyTypeDirection:
    case nPropertyTypeSpokes:
    case nPropertyTypeZoom:
        pSubControl.reset( new SdPresetPropertyBox( pLabel, pParent, rValue, rPresetId, rModifyHdl ) );
        break;
 
    case nPropertyTypeColor:
    case nPropertyTypeFillColor:
    case nPropertyTypeFirstColor:
    case nPropertyTypeCharColor:
    case nPropertyTypeLineColor:
        pSubControl.reset( new SdColorPropertyBox( pLabel, pParent, pTopLevel, rValue, rModifyHdl ) );
        break;
 
    case nPropertyTypeFont:
        pSubControl.reset( new SdFontPropertyBox( pLabel, pParent, rValue, rModifyHdl ) );
        break;
 
    case nPropertyTypeCharHeight:
        pSubControl.reset( new SdCharHeightPropertyBox( pLabel, pParent, rValue, rModifyHdl ) );
        break;
 
    case nPropertyTypeRotate:
        pSubControl.reset( new SdRotationPropertyBox( pLabel, pParent, rValue, rModifyHdl ) );
        break;
 
    case nPropertyTypeTransparency:
        pSubControl.reset( new SdTransparencyPropertyBox( pLabel, pParent, rValue, rModifyHdl ) );
        break;
 
    case nPropertyTypeScale:
        pSubControl.reset( new SdScalePropertyBox( pLabel, pParent, rValue, rModifyHdl ) );
        break;
 
    case nPropertyTypeCharDecoration:
        pSubControl.reset( new SdFontStylePropertyBox( pLabel, pParent, rValue, rModifyHdl ) );
        break;
    }
 
    return pSubControl;
}
 
}
 
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */