/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <config_features.h>
#include <com/sun/star/i18n/TextConversionOption.hpp>
#include <com/sun/star/sheet/DataPilotFieldFilter.hpp>
#include <scitems.hxx>
#include <sfx2/viewfrm.hxx>
#include <basic/sberrors.hxx>
#include <comphelper/lok.hxx>
#include <comphelper/propertysequence.hxx>
#include <svl/stritem.hxx>
#include <svl/numformat.hxx>
#include <svl/zforlist.hxx>
#include <svl/zformat.hxx>
#include <sfx2/dispatch.hxx>
#include <sfx2/request.hxx>
#include <vcl/commandinfoprovider.hxx>
#include <vcl/unohelp2.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld.hxx>
#include <svx/svxdlg.hxx>
#include <sot/formats.hxx>
#include <svx/postattr.hxx>
#include <editeng/fontitem.hxx>
#include <svx/clipfmtitem.hxx>
#include <svx/hlnkitem.hxx>
#include <basic/sbxcore.hxx>
#include <editeng/editview.hxx>
#include <editeng/urlfieldhelper.hxx>
#include <svtools/cliplistener.hxx>
#include <cellsh.hxx>
#include <ftools.hxx>
#include <sc.hrc>
#include <document.hxx>
#include <patattr.hxx>
#include <scmod.hxx>
#include <tabvwsh.hxx>
#include <uiitems.hxx>
#include <reffact.hxx>
#include <inputhdl.hxx>
#include <transobj.hxx>
#include <drwtrans.hxx>
#include <docfunc.hxx>
#include <editable.hxx>
#include <dpobject.hxx>
#include <dpsave.hxx>
#include <spellparam.hxx>
#include <postit.hxx>
#include <dpsdbtab.hxx>
#include <dpshttab.hxx>
#include <dbdata.hxx>
#include <docsh.hxx>
#include <cliputil.hxx>
#include <markdata.hxx>
#include <colorscale.hxx>
#include <condformatdlg.hxx>
#include <attrib.hxx>
#include <condformatdlgdata.hxx>
#include <impex.hxx>
#include <globstr.hrc>
#include <scresid.hxx>
#include <scui_def.hxx>
#include <scabstdlg.hxx>
#include <tokenstringcontext.hxx>
#include <cellvalue.hxx>
#include <tokenarray.hxx>
#include <formulacell.hxx>
#include <gridwin.hxx>
#include <searchresults.hxx>
#include <Sparkline.hxx>
#include <com/sun/star/ui/dialogs/XExecutableDialog.hpp>
#include <com/sun/star/lang/XInitialization.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/uno/XComponentContext.hpp>
#include <cppuhelper/bootstrap.hxx>
#include <o3tl/string_view.hxx>
#include <memory>
using namespace ::com::sun::star;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::uno;
namespace{
InsertDeleteFlags FlagsFromString(const OUString& rFlagsStr,
InsertDeleteFlags nFlagsMask = InsertDeleteFlags::CONTENTS | InsertDeleteFlags::ATTRIB)
{
OUString aFlagsStr = rFlagsStr.toAsciiUpperCase();
InsertDeleteFlags nFlags = InsertDeleteFlags::NONE;
for (sal_Int32 i=0 ; i < aFlagsStr.getLength(); ++i)
{
switch (aFlagsStr[i])
{
case 'A': return InsertDeleteFlags::ALL;
case 'S': nFlags |= InsertDeleteFlags::STRING & nFlagsMask; break;
case 'V': nFlags |= InsertDeleteFlags::VALUE & nFlagsMask; break;
case 'D': nFlags |= InsertDeleteFlags::DATETIME & nFlagsMask; break;
case 'F': nFlags |= InsertDeleteFlags::FORMULA & nFlagsMask; break;
case 'N': nFlags |= InsertDeleteFlags::NOTE & nFlagsMask; break;
case 'T': nFlags |= InsertDeleteFlags::ATTRIB & nFlagsMask; break;
case 'O': nFlags |= InsertDeleteFlags::OBJECTS & nFlagsMask; break;
}
}
return nFlags;
}
OUString FlagsToString( InsertDeleteFlags nFlags,
InsertDeleteFlags nFlagsMask = InsertDeleteFlags::CONTENTS | InsertDeleteFlags::ATTRIB )
{
OUString aFlagsStr;
if( nFlags == InsertDeleteFlags::ALL )
{
aFlagsStr = "A";
}
else
{
nFlags &= nFlagsMask;
if( nFlags & InsertDeleteFlags::STRING ) aFlagsStr += "S";
if( nFlags & InsertDeleteFlags::VALUE ) aFlagsStr += "V";
if( nFlags & InsertDeleteFlags::DATETIME ) aFlagsStr += "D";
if( nFlags & InsertDeleteFlags::FORMULA ) aFlagsStr += "F";
if( nFlags & InsertDeleteFlags::NOTE ) aFlagsStr += "N";
if( nFlags & InsertDeleteFlags::ATTRIB ) aFlagsStr += "T";
if( nFlags & InsertDeleteFlags::OBJECTS ) aFlagsStr += "O";
}
return aFlagsStr;
}
void SetTabNoAndCursor( const ScViewData& rViewData, std::u16string_view rCellId )
{
ScTabViewShell* pTabViewShell = rViewData.GetViewShell();
assert(pTabViewShell);
const ScDocument& rDoc = rViewData.GetDocShell()->GetDocument();
std::vector<sc::NoteEntry> aNotes;
rDoc.GetAllNoteEntries(aNotes);
sal_uInt32 nId = o3tl::toUInt32(rCellId);
auto lComp = [nId](const sc::NoteEntry& rNote) { return rNote.mpNote->GetId() == nId; };
const auto aFoundNoteIt = std::find_if(aNotes.begin(), aNotes.end(), lComp);
if (aFoundNoteIt != aNotes.end())
{
ScAddress aFoundPos = aFoundNoteIt->maPos;
pTabViewShell->SetTabNo(aFoundPos.Tab());
pTabViewShell->SetCursor(aFoundPos.Col(), aFoundPos.Row());
}
}
void HandleConditionalFormat(sal_uInt32 nIndex, bool bCondFormatDlg, bool bContainsCondFormat,
const sal_uInt16 nSlot, ScTabViewShell* pTabViewShell)
{
condformat::dialog::ScCondFormatDialogType eType = condformat::dialog::NONE;
switch (nSlot)
{
case SID_OPENDLG_CONDFRMT:
case SID_OPENDLG_CURRENTCONDFRMT:
eType = condformat::dialog::CONDITION;
break;
case SID_OPENDLG_COLORSCALE:
eType = condformat::dialog::COLORSCALE;
break;
case SID_OPENDLG_DATABAR:
eType = condformat::dialog::DATABAR;
break;
case SID_OPENDLG_ICONSET:
eType = condformat::dialog::ICONSET;
break;
case SID_OPENDLG_CONDDATE:
eType = condformat::dialog::DATE;
break;
default:
assert(false);
break;
}
if (bCondFormatDlg || !bContainsCondFormat)
{
// Put the xml string parameter to initialize the
// Conditional Format Dialog.
std::shared_ptr<ScCondFormatDlgData> pDlgItem(std::make_shared<ScCondFormatDlgData>(nullptr, nIndex, false));
pDlgItem->SetDialogType(eType);
pTabViewShell->setScCondFormatDlgItem(pDlgItem);
sal_uInt16 nId = ScCondFormatDlgWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow(nId);
SC_MOD()->SetRefDialog(nId, pWnd == nullptr);
}
}
void InsertCells(ScTabViewShell* pTabViewShell, SfxRequest &rReq, InsCellCmd eCmd, size_t nCount = 0)
{
if (eCmd!=INS_NONE)
{
pTabViewShell->InsertCells( eCmd, true, false, nCount );
if( ! rReq.IsAPI() )
{
OUString aParam;
switch( eCmd )
{
case INS_CELLSDOWN: aParam = "V"; break;
case INS_CELLSRIGHT: aParam = ">"; break;
case INS_INSROWS_BEFORE: aParam = "R"; break;
case INS_INSCOLS_BEFORE: aParam = "C"; break;
default:
{
// added to avoid warnings
}
}
rReq.AppendItem( SfxStringItem( FID_INS_CELL, aParam ) );
rReq.Done();
}
}
}
void DeleteCells(ScTabViewShell* pTabViewShell, SfxRequest &rReq, DelCellCmd eCmd)
{
if (eCmd != DelCellCmd::NONE )
{
pTabViewShell->DeleteCells( eCmd );
if( ! rReq.IsAPI() )
{
OUString aParam;
switch( eCmd )
{
case DelCellCmd::CellsUp: aParam = "U"; break;
case DelCellCmd::CellsLeft: aParam = "L"; break;
case DelCellCmd::Rows: aParam = "R"; break;
case DelCellCmd::Cols: aParam = "C"; break;
default:
{
// added to avoid warnings
}
}
rReq.AppendItem( SfxStringItem( FID_DELETE_CELL, aParam ) );
rReq.Done();
}
}
}
}
void ScCellShell::ExecuteEdit( SfxRequest& rReq )
{
ScModule* pScMod = SC_MOD();
ScTabViewShell* pTabViewShell = GetViewData().GetViewShell();
SfxBindings& rBindings = pTabViewShell->GetViewFrame().GetBindings();
const SfxItemSet* pReqArgs = rReq.GetArgs();
sal_uInt16 nSlot = rReq.GetSlot();
pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox
// finish input
if ( GetViewData().HasEditView( GetViewData().GetActivePart() ) )
{
switch ( nSlot )
{
case FID_DEFINE_NAME:
case FID_ADD_NAME:
case FID_USE_NAME:
case FID_INSERT_NAME:
case SID_SPELL_DIALOG:
case SID_HANGUL_HANJA_CONVERSION:
case SID_OPENDLG_CONDFRMT:
case SID_OPENDLG_CURRENTCONDFRMT:
case SID_OPENDLG_COLORSCALE:
case SID_OPENDLG_DATABAR:
pScMod->InputEnterHandler();
pTabViewShell->UpdateInputHandler();
break;
default:
break;
}
}
switch ( nSlot )
{
// insert / delete cells / rows / columns
case FID_INS_ROW:
case FID_INS_ROWS_BEFORE:
pTabViewShell->InsertCells(INS_INSROWS_BEFORE);
rReq.Done();
break;
case FID_INS_COLUMN:
case FID_INS_COLUMNS_BEFORE:
pTabViewShell->InsertCells(INS_INSCOLS_BEFORE);
rReq.Done();
break;
case FID_INS_ROWS_AFTER:
pTabViewShell->InsertCells(INS_INSROWS_AFTER);
rReq.Done();
break;
case FID_INS_COLUMNS_AFTER:
pTabViewShell->InsertCells(INS_INSCOLS_AFTER);
rReq.Done();
break;
case FID_INS_CELLSDOWN:
pTabViewShell->InsertCells(INS_CELLSDOWN);
rReq.Done();
break;
case FID_INS_CELLSRIGHT:
pTabViewShell->InsertCells(INS_CELLSRIGHT);
rReq.Done();
break;
case SID_DEL_ROWS:
pTabViewShell->DeleteCells( DelCellCmd::Rows );
rReq.Done();
break;
case SID_DEL_COLS:
pTabViewShell->DeleteCells( DelCellCmd::Cols );
rReq.Done();
break;
case FID_INS_CELL:
{
InsCellCmd eCmd=INS_NONE;
if ( pReqArgs )
{
const SfxPoolItem* pItem;
OUString aFlags;
if( pReqArgs->HasItem( FID_INS_CELL, &pItem ) )
aFlags = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( !aFlags.isEmpty() )
{
switch( aFlags[0] )
{
case 'V': eCmd = INS_CELLSDOWN ;break;
case '>': eCmd = INS_CELLSRIGHT ;break;
case 'R': eCmd = INS_INSROWS_BEFORE ;break;
case 'C': eCmd = INS_INSCOLS_BEFORE ;break;
}
}
}
else
{
if ( GetViewData().SimpleColMarked() )
eCmd = INS_INSCOLS_BEFORE;
else if ( GetViewData().SimpleRowMarked() )
eCmd = INS_INSROWS_BEFORE;
else
{
ScDocument& rDoc = GetViewData().GetDocument();
bool bTheFlag=(rDoc.GetChangeTrack()!=nullptr);
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
VclPtr<AbstractScInsertCellDlg> pDlg(pFact->CreateScInsertCellDlg(pTabViewShell->GetFrameWeld(), bTheFlag));
pDlg->StartExecuteAsync([pDlg, pTabViewShell](sal_Int32 nResult){
if (nResult == RET_OK)
{
SfxRequest aRequest(pTabViewShell->GetViewFrame(), FID_INS_CELL);
InsCellCmd eTmpCmd = pDlg->GetInsCellCmd();
size_t nInsCount = pDlg->GetCount();
InsertCells(pTabViewShell, aRequest, eTmpCmd, nInsCount);
}
pDlg->disposeOnce();
});
break;
}
}
InsertCells(pTabViewShell, rReq, eCmd);
}
break;
case FID_DELETE_CELL:
{
DelCellCmd eCmd = DelCellCmd::NONE;
if ( pReqArgs )
{
const SfxPoolItem* pItem;
OUString aFlags;
if( pReqArgs->HasItem( FID_DELETE_CELL, &pItem ) )
aFlags = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( !aFlags.isEmpty() )
{
switch( aFlags[0] )
{
case 'U': eCmd = DelCellCmd::CellsUp ;break;
case 'L': eCmd = DelCellCmd::CellsLeft ;break;
case 'R': eCmd = DelCellCmd::Rows ;break;
case 'C': eCmd = DelCellCmd::Cols ;break;
}
}
}
else
{
if ( GetViewData().SimpleColMarked() )
eCmd = DelCellCmd::Cols;
else if ( GetViewData().SimpleRowMarked() )
eCmd = DelCellCmd::Rows;
else
{
ScRange aRange;
ScDocument& rDoc = GetViewData().GetDocument();
bool bTheFlag=GetViewData().IsMultiMarked() ||
(GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE_FILTERED) ||
(rDoc.GetChangeTrack() != nullptr);
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
VclPtr<AbstractScDeleteCellDlg> pDlg(pFact->CreateScDeleteCellDlg( pTabViewShell->GetFrameWeld(), bTheFlag ));
pDlg->StartExecuteAsync([pDlg, pTabViewShell](sal_Int32 nResult){
if (nResult == RET_OK)
{
SfxRequest aRequest(pTabViewShell->GetViewFrame(), FID_INS_CELL);
DeleteCells(pTabViewShell, aRequest, pDlg->GetDelCellCmd());
}
pDlg->disposeOnce();
});
}
}
DeleteCells(pTabViewShell, rReq, eCmd);
}
break;
// delete contents from cells
case SID_DELETE_CONTENTS:
pTabViewShell->DeleteContents( InsertDeleteFlags::CONTENTS );
rReq.Done();
break;
case SID_DELETE:
{
InsertDeleteFlags nFlags = InsertDeleteFlags::NONE;
if ( pReqArgs!=nullptr && pTabViewShell->SelectionEditable() )
{
const SfxPoolItem* pItem;
OUString aFlags('A');
if( pReqArgs->HasItem( SID_DELETE, &pItem ) )
aFlags = static_cast<const SfxStringItem*>(pItem)->GetValue();
nFlags |= FlagsFromString(aFlags, InsertDeleteFlags::ALL);
}
else
{
ScEditableTester aTester( pTabViewShell );
if (aTester.IsEditable())
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScopedVclPtr<AbstractScDeleteContentsDlg> pDlg(pFact->CreateScDeleteContentsDlg(pTabViewShell->GetFrameWeld()));
ScDocument& rDoc = GetViewData().GetDocument();
SCTAB nTab = GetViewData().GetTabNo();
if ( rDoc.IsTabProtected(nTab) )
pDlg->DisableObjects();
if (pDlg->Execute() == RET_OK)
{
nFlags = pDlg->GetDelContentsCmdBits();
}
}
else
pTabViewShell->ErrorMessage(aTester.GetMessageId());
}
if( nFlags != InsertDeleteFlags::NONE )
{
pTabViewShell->DeleteContents( nFlags );
if( ! rReq.IsAPI() )
{
OUString aFlags = FlagsToString( nFlags, InsertDeleteFlags::ALL );
rReq.AppendItem( SfxStringItem( SID_DELETE, aFlags ) );
rReq.Done();
}
}
}
break;
// fill...
case FID_FILL_TO_BOTTOM:
pTabViewShell->FillSimple( FILL_TO_BOTTOM );
rReq.Done();
break;
case FID_FILL_TO_RIGHT:
pTabViewShell->FillSimple( FILL_TO_RIGHT );
rReq.Done();
break;
case FID_FILL_TO_TOP:
pTabViewShell->FillSimple( FILL_TO_TOP );
rReq.Done();
break;
case FID_FILL_TO_LEFT:
pTabViewShell->FillSimple( FILL_TO_LEFT );
rReq.Done();
break;
case FID_FILL_TAB:
{
InsertDeleteFlags nFlags = InsertDeleteFlags::NONE;
ScPasteFunc nFunction = ScPasteFunc::NONE;
bool bSkipEmpty = false;
bool bAsLink = false;
if ( pReqArgs!=nullptr && pTabViewShell->SelectionEditable() )
{
const SfxPoolItem* pItem;
OUString aFlags('A');
if( pReqArgs->HasItem( FID_FILL_TAB, &pItem ) )
aFlags = static_cast<const SfxStringItem*>(pItem)->GetValue();
nFlags |= FlagsFromString(aFlags);
}
else
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScopedVclPtr<AbstractScInsertContentsDlg> pDlg(pFact->CreateScInsertContentsDlg(pTabViewShell->GetFrameWeld(),
new OUString(ScResId(STR_FILL_TAB))));
pDlg->SetFillMode(true);
if (pDlg->Execute() == RET_OK)
{
nFlags = pDlg->GetInsContentsCmdBits();
nFunction = pDlg->GetFormulaCmdBits();
bSkipEmpty = pDlg->IsSkipEmptyCells();
bAsLink = pDlg->IsLink();
// there is no MoveMode with fill tabs
}
}
if( nFlags != InsertDeleteFlags::NONE )
{
pTabViewShell->FillTab( nFlags, nFunction, bSkipEmpty, bAsLink );
if( ! rReq.IsAPI() )
{
OUString aFlags = FlagsToString( nFlags );
rReq.AppendItem( SfxStringItem( FID_FILL_TAB, aFlags ) );
rReq.Done();
}
}
}
break;
case FID_FILL_SERIES:
{
if (GetViewData().SelectionForbidsCellFill())
// Slot should be already disabled, but in case it wasn't
// don't even attempt to do the evaluation and popup a
// dialog.
break;
SCCOL nStartCol;
SCROW nStartRow;
SCTAB nStartTab;
SCCOL nEndCol;
SCROW nEndRow;
SCTAB nEndTab;
sal_uInt16 nPossDir = FDS_OPT_NONE;
FillDir eFillDir = FILL_TO_BOTTOM;
FillCmd eFillCmd = FILL_LINEAR;
FillDateCmd eFillDateCmd = FILL_DAY;
double fStartVal = MAXDOUBLE;
double fIncVal = 1;
double fMaxVal = MAXDOUBLE;
bool bDoIt = false;
GetViewData().GetSimpleArea( nStartCol, nStartRow, nStartTab,
nEndCol, nEndRow, nEndTab );
if( nStartCol!=nEndCol )
{
nPossDir |= FDS_OPT_HORZ;
eFillDir=FILL_TO_RIGHT;
}
if( nStartRow!=nEndRow )
{
nPossDir |= FDS_OPT_VERT;
eFillDir=FILL_TO_BOTTOM;
}
ScDocument& rDoc = GetViewData().GetDocument();
SvNumberFormatter* pFormatter = rDoc.GetFormatTable();
if( pReqArgs )
{
const SfxPoolItem* pItem;
OUString aFillDir, aFillCmd, aFillDateCmd;
OUString aFillStep, aFillStart, aFillMax;
sal_uInt32 nKey;
double fTmpVal;
if( pReqArgs->HasItem( FID_FILL_SERIES, &pItem ) )
aFillDir = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( pReqArgs->HasItem( FN_PARAM_1, &pItem ) )
aFillCmd = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( pReqArgs->HasItem( FN_PARAM_2, &pItem ) )
aFillDateCmd = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( pReqArgs->HasItem( FN_PARAM_3, &pItem ) )
aFillStep = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( pReqArgs->HasItem( FN_PARAM_4, &pItem ) )
aFillStart = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( pReqArgs->HasItem( FN_PARAM_5, &pItem ) )
aFillMax = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( !aFillDir.isEmpty() )
switch( aFillDir[0] )
{
case 'B': case 'b': eFillDir=FILL_TO_BOTTOM; break;
case 'R': case 'r': eFillDir=FILL_TO_RIGHT; break;
case 'T': case 't': eFillDir=FILL_TO_TOP; break;
case 'L': case 'l': eFillDir=FILL_TO_LEFT; break;
}
if( !aFillCmd.isEmpty() )
switch( aFillCmd[0] )
{
case 'S': case 's': eFillCmd=FILL_SIMPLE; break;
case 'L': case 'l': eFillCmd=FILL_LINEAR; break;
case 'G': case 'g': eFillCmd=FILL_GROWTH; break;
case 'D': case 'd': eFillCmd=FILL_DATE; break;
case 'A': case 'a': eFillCmd=FILL_AUTO; break;
}
if( !aFillDateCmd.isEmpty() )
switch( aFillDateCmd[0] )
{
case 'D': case 'd': eFillDateCmd=FILL_DAY; break;
case 'W': case 'w': eFillDateCmd=FILL_WEEKDAY; break;
case 'M': case 'm': eFillDateCmd=FILL_MONTH; break;
case 'Y': case 'y': eFillDateCmd=FILL_YEAR; break;
}
nKey = 0;
if( pFormatter->IsNumberFormat( aFillStart, nKey, fTmpVal ))
fStartVal = fTmpVal;
nKey = 0;
if( pFormatter->IsNumberFormat( aFillStep, nKey, fTmpVal ))
fIncVal = fTmpVal;
nKey = 0;
if( pFormatter->IsNumberFormat( aFillMax, nKey, fTmpVal ))
fMaxVal = fTmpVal;
bDoIt = true;
}
else // (pReqArgs == nullptr) => raise Dialog
{
sal_uInt32 nPrivFormat = rDoc.GetNumberFormat( nStartCol, nStartRow, nStartTab );
CellType eCellType = rDoc.GetCellType( nStartCol, nStartRow, nStartTab );
const SvNumberformat* pPrivEntry = pFormatter->GetEntry( nPrivFormat );
const SCSIZE nSelectHeight = nEndRow - nStartRow + 1;
const SCSIZE nSelectWidth = nEndCol - nStartCol + 1;
if (!pPrivEntry)
{
OSL_FAIL("Numberformat not found !!!");
}
else
{
SvNumFormatType nPrivType = pPrivEntry->GetType();
if (nPrivType & SvNumFormatType::DATE)
{
eFillCmd=FILL_DATE;
}
else if(eCellType==CELLTYPE_STRING)
{
eFillCmd=FILL_AUTO;
}
}
OUString aStartStr;
// suggest default Startvalue only, when just 1 row or column
if ( nStartCol == nEndCol || nStartRow == nEndRow )
{
double fInputEndVal = 0.0;
OUString aEndStr;
const bool forceSystemLocale = true;
aStartStr = rDoc.GetInputString( nStartCol, nStartRow, nStartTab, forceSystemLocale );
fStartVal = rDoc.GetValue( nStartCol, nStartRow, nStartTab );
if(eFillDir==FILL_TO_BOTTOM && nStartRow < nEndRow )
{
aEndStr = rDoc.GetInputString( nStartCol, nStartRow+1, nStartTab, forceSystemLocale );
if(!aEndStr.isEmpty())
{
fInputEndVal = rDoc.GetValue( nStartCol, nStartRow+1, nStartTab );
fIncVal=fInputEndVal-fStartVal;
}
}
else
{
if(nStartCol < nEndCol)
{
aEndStr = rDoc.GetInputString( nStartCol+1, nStartRow, nStartTab, forceSystemLocale );
if(!aEndStr.isEmpty())
{
fInputEndVal = rDoc.GetValue( nStartCol+1, nStartRow, nStartTab );
fIncVal=fInputEndVal-fStartVal;
}
}
}
if(eFillCmd==FILL_DATE)
{
const Date& rNullDate = rDoc.GetFormatTable()->GetNullDate();
Date aStartDate = rNullDate;
aStartDate.AddDays(fStartVal);
Date aEndDate = rNullDate;
aEndDate.AddDays(fInputEndVal);
double fTempDate=0;
if(aStartDate.GetYear()!=aEndDate.GetYear())
{
eFillDateCmd = FILL_YEAR;
fTempDate=aEndDate.GetYear()-aStartDate.GetYear();
}
if(aStartDate.GetMonth()!=aEndDate.GetMonth())
{
eFillDateCmd = FILL_MONTH;
fTempDate=fTempDate*12+aEndDate.GetMonth()-aStartDate.GetMonth();
}
if(aStartDate.GetDay()==aEndDate.GetDay())
{
fIncVal=fTempDate;
}
}
}
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScopedVclPtr<AbstractScFillSeriesDlg> pDlg(pFact->CreateScFillSeriesDlg( pTabViewShell->GetFrameWeld(),
rDoc,
eFillDir, eFillCmd, eFillDateCmd,
aStartStr, fIncVal, fMaxVal,
nSelectHeight, nSelectWidth, nPossDir));
if ( nStartCol != nEndCol && nStartRow != nEndRow )
{
pDlg->SetEdStartValEnabled(false);
}
if ( pDlg->Execute() == RET_OK )
{
eFillDir = pDlg->GetFillDir();
eFillCmd = pDlg->GetFillCmd();
eFillDateCmd = pDlg->GetFillDateCmd();
if(eFillCmd==FILL_AUTO)
{
OUString aStr = pDlg->GetStartStr();
if(!aStr.isEmpty())
pTabViewShell->EnterData( nStartCol, nStartRow, nStartTab, aStr );
}
fStartVal = pDlg->GetStart();
fIncVal = pDlg->GetStep();
fMaxVal = pDlg->GetMax();
bDoIt = true;
}
}
if( bDoIt )
{
//nScFillModeMouseModifier = 0; // no Ctrl/Copy
pTabViewShell->FillSeries( eFillDir, eFillCmd, eFillDateCmd, fStartVal, fIncVal, fMaxVal );
if( ! rReq.IsAPI() )
{
OUString aPara;
const Color* pColor = nullptr;
switch( eFillDir )
{
case FILL_TO_BOTTOM: aPara = "B"; break;
case FILL_TO_RIGHT: aPara = "R"; break;
case FILL_TO_TOP: aPara = "T"; break;
case FILL_TO_LEFT: aPara = "L"; break;
default: break;
}
rReq.AppendItem( SfxStringItem( FID_FILL_SERIES, aPara ) );
switch( eFillCmd )
{
case FILL_SIMPLE: aPara = "S"; break;
case FILL_LINEAR: aPara = "L"; break;
case FILL_GROWTH: aPara = "G"; break;
case FILL_DATE: aPara = "D"; break;
case FILL_AUTO: aPara = "A"; break;
default: break;
}
rReq.AppendItem( SfxStringItem( FN_PARAM_1, aPara ) );
switch( eFillDateCmd )
{
case FILL_DAY: aPara = "D"; break;
case FILL_WEEKDAY: aPara = "W"; break;
case FILL_MONTH: aPara = "M"; break;
case FILL_YEAR: aPara = "Y"; break;
default: break;
}
rReq.AppendItem( SfxStringItem( FN_PARAM_2, aPara ) );
sal_uInt32 nFormatKey = pFormatter->GetStandardFormat(SvNumFormatType::NUMBER,
ScGlobal::eLnge );
pFormatter->GetOutputString( fIncVal, nFormatKey, aPara, &pColor );
rReq.AppendItem( SfxStringItem( FN_PARAM_3, aPara ) );
pFormatter->GetOutputString( fStartVal, nFormatKey, aPara, &pColor );
rReq.AppendItem( SfxStringItem( FN_PARAM_4, aPara ) );
pFormatter->GetOutputString( fMaxVal, nFormatKey, aPara, &pColor );
rReq.AppendItem( SfxStringItem( FN_PARAM_5, aPara ) );
rReq.Done();
}
}
}
break;
case FID_FILL_AUTO:
{
SCCOL nStartCol;
SCROW nStartRow;
SCCOL nEndCol;
SCROW nEndRow;
GetViewData().GetFillData( nStartCol, nStartRow, nEndCol, nEndRow );
SCCOL nFillCol = GetViewData().GetRefEndX();
SCROW nFillRow = GetViewData().GetRefEndY();
ScDocument& rDoc = GetViewData().GetDocument();
sal_uInt16 nOrigScFillModeMouseModifier = nScFillModeMouseModifier;
bool bUseSelection = true;
if( pReqArgs != nullptr )
{
if( const SfxStringItem* pItem = pReqArgs->GetItemIfSet( FID_FILL_AUTO ) )
{
ScAddress aScAddress;
OUString aArg = pItem->GetValue();
if( aScAddress.Parse( aArg, rDoc, rDoc.GetAddressConvention() ) & ScRefFlags::VALID )
{
nFillRow = aScAddress.Row();
nFillCol = aScAddress.Col();
}
SCTAB nStartTab, nEndTab;
GetViewData().GetSimpleArea(nStartCol, nStartRow, nStartTab, nEndCol,
nEndRow, nEndTab);
bUseSelection = false;
}
const SfxPoolItem* pItem;
if (pReqArgs->HasItem(FN_PARAM_1, &pItem))
{
/*
nScFillModeMouseModifier controls if we "Copy cells" or "Fill series"
- if nScFillModeMouseModifier is set to "KEY_MOD1", use "Copy cells"
- otherwise use "Fill series"
This is also the same with auto fill by dragging mouse
- dragging with Ctrl key will set nScFillModeMouseModifier to KEY_MOD1, use "Copy cells"
- only dragging will use "Fill series" (no Ctrl key)
*/
const bool bCopyCells = static_cast<const SfxBoolItem*>(pItem)->GetValue();
nScFillModeMouseModifier &= ~KEY_MOD1; // turn off, reset to 0
if (bCopyCells)
nScFillModeMouseModifier |= KEY_MOD1; // turn on
}
}
if (bUseSelection) // call via mouse or if FN_PARAM_1 exists
{
// not in a merged cell
if ( nStartCol == nEndCol && nStartRow == nEndRow )
{
SCCOL nMergeCol = nStartCol;
SCROW nMergeRow = nStartRow;
if ( GetViewData().GetDocument().ExtendMerge(
nStartCol, nStartRow, nMergeCol, nMergeRow,
GetViewData().GetTabNo() ) )
{
if ( nFillCol >= nStartCol && nFillCol <= nMergeCol && nFillRow == nStartRow )
nFillCol = nStartCol;
if ( nFillRow >= nStartRow && nFillRow <= nMergeRow && nFillCol == nStartCol )
nFillRow = nStartRow;
}
}
}
if ( nFillCol != nEndCol || nFillRow != nEndRow )
{
if ( nFillCol==nEndCol || nFillRow==nEndRow )
{
FillDir eDir = FILL_TO_BOTTOM;
SCCOLROW nCount = 0;
if ( nFillCol==nEndCol )
{
if ( nFillRow > nEndRow )
{
eDir = FILL_TO_BOTTOM;
nCount = nFillRow - nEndRow;
}
else if ( nFillRow < nStartRow )
{
eDir = FILL_TO_TOP;
nCount = nStartRow - nFillRow;
}
}
else
{
if ( nFillCol > nEndCol )
{
eDir = FILL_TO_RIGHT;
nCount = nFillCol - nEndCol;
}
else if ( nFillCol < nStartCol )
{
eDir = FILL_TO_LEFT;
nCount = nStartCol - nFillCol;
}
}
if ( nCount != 0)
{
pTabViewShell->FillAuto( eDir, nStartCol, nStartRow, nEndCol, nEndRow, nCount );
if( ! rReq.IsAPI() )
{
ScAddress aAdr( nFillCol, nFillRow, 0 );
OUString aAdrStr(aAdr.Format(ScRefFlags::RANGE_ABS, &rDoc, rDoc.GetAddressConvention()));
rReq.AppendItem( SfxStringItem( FID_FILL_AUTO, aAdrStr ) );
rReq.Done();
}
}
}
else
{
OSL_FAIL( "Direction not unique for autofill" );
}
}
// reset nScFillModeMouseModifier to its original state
// otherwise, auto fill by dragging will not work as expected
nScFillModeMouseModifier = nOrigScFillModeMouseModifier;
}
break;
case FID_FILL_SINGLE_EDIT:
ExecuteFillSingleEdit();
break;
case SID_RANDOM_NUMBER_GENERATOR_DIALOG:
{
sal_uInt16 nId = ScRandomNumberGeneratorDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_SAMPLING_DIALOG:
{
sal_uInt16 nId = ScSamplingDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_DESCRIPTIVE_STATISTICS_DIALOG:
{
sal_uInt16 nId = ScDescriptiveStatisticsDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_ANALYSIS_OF_VARIANCE_DIALOG:
{
sal_uInt16 nId = ScAnalysisOfVarianceDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_CORRELATION_DIALOG:
{
sal_uInt16 nId = ScCorrelationDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_COVARIANCE_DIALOG:
{
sal_uInt16 nId = ScCovarianceDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_EXPONENTIAL_SMOOTHING_DIALOG:
{
sal_uInt16 nId = ScExponentialSmoothingDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_MOVING_AVERAGE_DIALOG:
{
sal_uInt16 nId = ScMovingAverageDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_REGRESSION_DIALOG:
{
sal_uInt16 nId = ScRegressionDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_TTEST_DIALOG:
{
sal_uInt16 nId = ScTTestDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_FTEST_DIALOG:
{
sal_uInt16 nId = ScFTestDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_ZTEST_DIALOG:
{
sal_uInt16 nId = ScZTestDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_CHI_SQUARE_TEST_DIALOG:
{
sal_uInt16 nId = ScChiSquareTestDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_FOURIER_ANALYSIS_DIALOG:
{
sal_uInt16 nId = ScFourierAnalysisDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_SEARCH_RESULTS_DIALOG:
{
const SfxPoolItem* pItem = nullptr;
if (pReqArgs && pReqArgs->HasItem(SID_SEARCH_RESULTS_DIALOG, &pItem))
{
bool bVisible = static_cast<const SfxBoolItem*>(pItem)->GetValue();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
// The window ID should equal the slot ID, but not a biggie if it wasn't.
sal_uInt16 nId = sc::SearchResultsDlgWrapper::GetChildWindowId();
rViewFrm.SetChildWindow(nId, bVisible, false);
}
rReq.Done();
}
break;
case SID_INSERT_SPARKLINE:
case SID_EDIT_SPARKLINE_GROUP:
{
sal_uInt16 nId = sc::SparklineDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrame = pTabViewShell->GetViewFrame();
SfxChildWindow* pWindow = rViewFrame.GetChildWindow(nId);
pScMod->SetRefDialog(nId, pWindow == nullptr);
rReq.Done();
}
break;
case SID_EDIT_SPARKLINE:
{
sal_uInt16 nId = sc::SparklineDataRangeDialogWrapper::GetChildWindowId();
SfxViewFrame& rViewFrame = pTabViewShell->GetViewFrame();
SfxChildWindow* pWindow = rViewFrame.GetChildWindow(nId);
pScMod->SetRefDialog(nId, pWindow == nullptr);
rReq.Done();
}
break;
case SID_DELETE_SPARKLINE:
{
pTabViewShell->DeleteContents(InsertDeleteFlags::SPARKLINES);
rReq.Done();
}
break;
case SID_DELETE_SPARKLINE_GROUP:
{
ScRange aMarkRange;
ScMarkType eMarkType = GetViewData().GetSimpleArea(aMarkRange);
if (eMarkType == SC_MARK_SIMPLE)
{
std::shared_ptr<sc::SparklineGroup> pSparklineGroup;
if (GetViewData().GetDocument().GetSparklineGroupInRange(aMarkRange, pSparklineGroup) && pSparklineGroup)
{
GetViewData().GetDocShell()->GetDocFunc().DeleteSparklineGroup(pSparklineGroup, GetViewData().GetTabNo());
}
}
rReq.Done();
}
break;
case SID_GROUP_SPARKLINES:
{
ScRange aRange;
if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE)
{
ScAddress aCursorAddress(GetViewData().GetCurX(), GetViewData().GetCurY(), GetViewData().GetTabNo());
auto pSparkline = GetViewData().GetDocument().GetSparkline(aCursorAddress);
if (pSparkline)
{
auto const& rpSparklineGroup = pSparkline->getSparklineGroup();
GetViewData().GetDocShell()->GetDocFunc().GroupSparklines(aRange, rpSparklineGroup);
}
}
rReq.Done();
}
break;
case SID_UNGROUP_SPARKLINES:
{
ScRange aRange;
if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE)
{
GetViewData().GetDocShell()->GetDocFunc().UngroupSparklines(aRange);
}
rReq.Done();
}
break;
// disposal (Outlines)
// SID_AUTO_OUTLINE, SID_OUTLINE_DELETEALL in Execute (in docsh.idl)
case SID_OUTLINE_HIDE:
if ( GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() ) )
pTabViewShell->SetDataPilotDetails( false );
else
pTabViewShell->HideMarkedOutlines();
rReq.Done();
break;
case SID_OUTLINE_SHOW:
{
ScDPObject* pDPObj = GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() );
if ( pDPObj )
{
Sequence<sheet::DataPilotFieldFilter> aFilters;
css::sheet::DataPilotFieldOrientation nOrientation;
if ( pTabViewShell->HasSelectionForDrillDown( nOrientation ) )
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScopedVclPtr<AbstractScDPShowDetailDlg> pDlg( pFact->CreateScDPShowDetailDlg(
pTabViewShell->GetFrameWeld(), *pDPObj, nOrientation ) );
if ( pDlg->Execute() == RET_OK )
{
OUString aNewDimName( pDlg->GetDimensionName() );
pTabViewShell->SetDataPilotDetails( true, &aNewDimName );
}
}
else if ( !pDPObj->IsServiceData() &&
pDPObj->GetDataFieldPositionData(
ScAddress( GetViewData().GetCurX(), GetViewData().GetCurY(), GetViewData().GetTabNo() ),
aFilters ) )
pTabViewShell->ShowDataPilotSourceData( *pDPObj, aFilters );
else
pTabViewShell->SetDataPilotDetails(true);
}
else
pTabViewShell->ShowMarkedOutlines();
rReq.Done();
}
break;
case SID_OUTLINE_MAKE:
{
bool bColumns = false;
bool bOk = true;
if ( GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() ) )
{
ScDPNumGroupInfo aNumInfo;
aNumInfo.mbEnable = true;
aNumInfo.mbAutoStart = true;
aNumInfo.mbAutoEnd = true;
sal_Int32 nParts = 0;
if ( pTabViewShell->HasSelectionForDateGroup( aNumInfo, nParts ) )
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
const Date& rNullDate( GetViewData().GetDocument().GetFormatTable()->GetNullDate() );
ScopedVclPtr<AbstractScDPDateGroupDlg> pDlg( pFact->CreateScDPDateGroupDlg(
pTabViewShell->GetFrameWeld(),
aNumInfo, nParts, rNullDate ) );
if( pDlg->Execute() == RET_OK )
{
aNumInfo = pDlg->GetGroupInfo();
pTabViewShell->DateGroupDataPilot( aNumInfo, pDlg->GetDatePart() );
}
}
else if ( pTabViewShell->HasSelectionForNumGroup( aNumInfo ) )
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScopedVclPtr<AbstractScDPNumGroupDlg> pDlg( pFact->CreateScDPNumGroupDlg(
pTabViewShell->GetFrameWeld(), aNumInfo ) );
if( pDlg->Execute() == RET_OK )
pTabViewShell->NumGroupDataPilot( pDlg->GetGroupInfo() );
}
else
pTabViewShell->GroupDataPilot();
bOk = false;
}
else if( pReqArgs != nullptr )
{
const SfxPoolItem* pItem;
bOk = false;
if( pReqArgs->HasItem( SID_OUTLINE_MAKE, &pItem ) )
{
OUString aCol = static_cast<const SfxStringItem*>(pItem)->GetValue();
aCol = aCol.toAsciiUpperCase();
switch( aCol[0] )
{
case 'R': bColumns=false; bOk = true;break;
case 'C': bColumns=true; bOk = true;break;
}
}
}
else // Dialog, when not whole rows/columns are marked
{
if ( GetViewData().SimpleColMarked() && !GetViewData().SimpleRowMarked() )
bColumns = true;
else if ( !GetViewData().SimpleColMarked() && GetViewData().SimpleRowMarked() )
bColumns = false;
else
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
VclPtr<AbstractScGroupDlg> pDlg(pFact->CreateAbstractScGroupDlg(pTabViewShell->GetFrameWeld()));
pDlg->StartExecuteAsync(
[pDlg, pTabViewShell] (sal_Int32 nResult) {
if( RET_OK == nResult )
{
bool bColumn = pDlg->GetColsChecked();
pTabViewShell->MakeOutline( bColumn );
}
pDlg->disposeOnce();
}
);
bOk = false;
}
}
if (bOk)
{
pTabViewShell->MakeOutline( bColumns );
if( ! rReq.IsAPI() )
{
OUString aCol = bColumns ? OUString('C') : OUString('R');
rReq.AppendItem( SfxStringItem( SID_OUTLINE_MAKE, aCol ) );
rReq.Done();
}
}
}
break;
case SID_OUTLINE_REMOVE:
{
bool bColumns = false;
bool bOk = true;
if ( GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() ) )
{
pTabViewShell->UngroupDataPilot();
bOk = false;
}
else if( pReqArgs != nullptr )
{
const SfxPoolItem* pItem;
bOk = false;
if( pReqArgs->HasItem( SID_OUTLINE_REMOVE, &pItem ) )
{
OUString aCol = static_cast<const SfxStringItem*>(pItem)->GetValue();
aCol = aCol.toAsciiUpperCase();
switch (aCol[0])
{
case 'R': bColumns=false; bOk = true;break;
case 'C': bColumns=true; bOk = true;break;
}
}
}
else // Dialog only when removal for rows and columns is possible
{
bool bColPoss, bRowPoss;
pTabViewShell->TestRemoveOutline( bColPoss, bRowPoss );
// TODO: handle this case in LOK too
if ( bColPoss && bRowPoss && !comphelper::LibreOfficeKit::isActive() )
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
VclPtr<AbstractScGroupDlg> pDlg(pFact->CreateAbstractScGroupDlg(pTabViewShell->GetFrameWeld(), true));
pDlg->StartExecuteAsync(
[pDlg, pTabViewShell] (sal_Int32 nResult) {
if( RET_OK == nResult )
{
bool bColumn = pDlg->GetColsChecked();
pTabViewShell->RemoveOutline( bColumn );
}
pDlg->disposeOnce();
}
);
bOk = false;
}
else if ( bColPoss )
bColumns = true;
else if ( bRowPoss )
bColumns = false;
else
bOk = false;
}
if (bOk)
{
pTabViewShell->RemoveOutline( bColumns );
if( ! rReq.IsAPI() )
{
OUString aCol = bColumns ? OUString('C') : OUString('R');
rReq.AppendItem( SfxStringItem( SID_OUTLINE_REMOVE, aCol ) );
rReq.Done();
}
}
}
break;
// Clipboard
case SID_COPY: // for graphs in DrawShell
{
weld::WaitObject aWait( GetViewData().GetDialogParent() );
pTabViewShell->CopyToClip( nullptr, false, false, true );
rReq.Done();
GetViewData().SetPasteMode( ScPasteFlags::Mode | ScPasteFlags::Border );
pTabViewShell->ShowCursor();
pTabViewShell->UpdateCopySourceOverlay();
}
break;
case SID_CUT: // for graphs in DrawShell
{
weld::WaitObject aWait( GetViewData().GetDialogParent() );
pTabViewShell->CutToClip();
rReq.Done();
GetViewData().SetPasteMode( ScPasteFlags::Mode | ScPasteFlags::Border );
pTabViewShell->ShowCursor();
pTabViewShell->UpdateCopySourceOverlay();
}
break;
case SID_COPYDELETE: // for graphs in DrawShell
{
weld::WaitObject aWait( GetViewData().GetDialogParent() );
pTabViewShell->CopyToClip( nullptr, true, false, true );
pTabViewShell->DeleteContents( InsertDeleteFlags::CONTENTS );
rReq.Done();
GetViewData().SetPasteMode( ScPasteFlags::Mode | ScPasteFlags::Border );
pTabViewShell->ShowCursor();
pTabViewShell->UpdateCopySourceOverlay();
}
break;
case SID_PASTE:
{
ScClipUtil::PasteFromClipboard( GetViewData(), pTabViewShell, true );
rReq.Done();
}
break;
case SID_CLIPBOARD_FORMAT_ITEMS:
{
weld::WaitObject aWait( GetViewData().GetDialogParent() );
SotClipboardFormatId nFormat = SotClipboardFormatId::NONE;
const SfxPoolItem* pItem;
if ( pReqArgs && pReqArgs->GetItemState(nSlot, true, &pItem) == SfxItemState::SET )
if (auto pIntItem = dynamic_cast<const SfxUInt32Item*>(pItem) )
nFormat = static_cast<SotClipboardFormatId>(pIntItem->GetValue());
if ( nFormat != SotClipboardFormatId::NONE )
{
css::uno::Reference<css::datatransfer::XTransferable2> xTransferable(ScTabViewShell::GetClipData(GetViewData().GetActiveWin()));
bool bCells = ( ScTransferObj::GetOwnClipboard(xTransferable) != nullptr );
bool bDraw = ( ScDrawTransferObj::GetOwnClipboard(xTransferable) != nullptr );
bool bOle = ( nFormat == SotClipboardFormatId::EMBED_SOURCE );
if ( bCells && bOle )
pTabViewShell->PasteFromSystem();
else if ( bDraw && bOle )
pTabViewShell->PasteDraw();
else
pTabViewShell->PasteFromSystem(nFormat);
}
//?else
//? pTabViewShell->PasteFromSystem();
rReq.Done();
}
pTabViewShell->CellContentChanged();
break;
case FID_INS_CELL_CONTENTS:
{
ScDocument& rDoc = GetViewData().GetDocument();
bool bOtherDoc = !rDoc.IsClipboardSource();
// keep a reference in case the clipboard is changed during dialog or PasteFromClip
const ScTransferObj* pOwnClip = ScTransferObj::GetOwnClipboard(ScTabViewShell::GetClipData(GetViewData().GetActiveWin()));
if ( pOwnClip )
{
InsertDeleteFlags nFlags = InsertDeleteFlags::NONE;
ScPasteFunc nFunction = ScPasteFunc::NONE;
InsCellCmd eMoveMode = INS_NONE;
bool bSkipEmpty = false;
bool bTranspose = false;
bool bAsLink = false;
if ( pReqArgs!=nullptr && pTabViewShell->SelectionEditable() )
{
const SfxPoolItem* pItem;
OUString aFlags('A');
if( pReqArgs->HasItem( FID_INS_CELL_CONTENTS, &pItem ) )
aFlags = static_cast<const SfxStringItem*>(pItem)->GetValue();
nFlags |= FlagsFromString(aFlags);
const SfxUInt16Item* pFuncItem = rReq.GetArg<SfxUInt16Item>(FN_PARAM_1);
const SfxBoolItem* pSkipItem = rReq.GetArg<SfxBoolItem>(FN_PARAM_2);
const SfxBoolItem* pTransposeItem = rReq.GetArg<SfxBoolItem>(FN_PARAM_3);
const SfxBoolItem* pLinkItem = rReq.GetArg<SfxBoolItem>(FN_PARAM_4);
const SfxInt16Item* pMoveItem = rReq.GetArg<SfxInt16Item>(FN_PARAM_5);
if ( pFuncItem )
nFunction = static_cast<ScPasteFunc>(pFuncItem->GetValue());
if ( pSkipItem )
bSkipEmpty = pSkipItem->GetValue();
if ( pTransposeItem )
bTranspose = pTransposeItem->GetValue();
if ( pLinkItem )
bAsLink = pLinkItem->GetValue();
if ( pMoveItem )
eMoveMode = static_cast<InsCellCmd>(pMoveItem->GetValue());
}
else
{
ScEditableTester aTester( pTabViewShell );
if (aTester.IsEditable())
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScopedVclPtr<AbstractScInsertContentsDlg> pDlg(pFact->CreateScInsertContentsDlg(pTabViewShell->GetFrameWeld()));
pDlg->SetOtherDoc( bOtherDoc );
// if ChangeTrack MoveMode disable
pDlg->SetChangeTrack( rDoc.GetChangeTrack() != nullptr );
// fdo#56098 disable shift if necessary
if (!bOtherDoc)
{
ScViewData& rData = GetViewData();
if ( rData.GetMarkData().GetTableSelect( rData.GetTabNo() ) )
{
SCCOL nStartX, nEndX, nClipStartX, nClipSizeX, nRangeSizeX;
SCROW nStartY, nEndY, nClipStartY, nClipSizeY, nRangeSizeY;
SCTAB nStartTab, nEndTab;
pOwnClip->GetDocument()->GetClipStart( nClipStartX, nClipStartY );
pOwnClip->GetDocument()->GetClipArea( nClipSizeX, nClipSizeY, true );
if ( rData.GetSimpleArea( nStartX, nStartY, nStartTab,
nEndX, nEndY, nEndTab ) != SC_MARK_SIMPLE ||
nStartTab != nEndTab )
{
// the destination is not a simple range,
// assume the destination as the current cell
nStartX = nEndX = rData.GetCurX();
nStartY = nEndY = rData.GetCurY();
nStartTab = rData.GetTabNo();
}
// we now have clip- and range dimensions
// the size of the destination area is the larger of the two
nRangeSizeX = nClipSizeX >= nEndX - nStartX ? nClipSizeX : nEndX - nStartX;
nRangeSizeY = nClipSizeY >= nEndY - nStartY ? nClipSizeY : nEndY - nStartY;
// When the source and destination areas intersect things may go wrong,
// especially if the area contains references. This may produce data loss
// (e.g. formulas that get wrong references), this scenario _must_ be avoided.
ScRange aSource( nClipStartX, nClipStartY, nStartTab,
nClipStartX + nClipSizeX, nClipStartY + nClipSizeY, nStartTab );
ScRange aDest( nStartX, nStartY, nStartTab,
nStartX + nRangeSizeX, nStartY + nRangeSizeY, nStartTab );
if ( pOwnClip->GetDocument()->IsCutMode() && aSource.Intersects( aDest ) )
pDlg->SetCellShiftDisabled( CellShiftDisabledFlags::Down | CellShiftDisabledFlags::Right );
else
{
//no conflict with intersecting ranges,
//check if paste plus shift will fit on sheet
//and disable shift-option if no fit
CellShiftDisabledFlags nDisableShiftX = CellShiftDisabledFlags::NONE;
CellShiftDisabledFlags nDisableShiftY = CellShiftDisabledFlags::NONE;
//check if horizontal shift will fit
if ( !rData.GetDocument().IsBlockEmpty(
rDoc.MaxCol() - nRangeSizeX, nStartY,
rDoc.MaxCol(), nStartY + nRangeSizeY,
nStartTab ) )
nDisableShiftX = CellShiftDisabledFlags::Right;
//check if vertical shift will fit
if ( !rData.GetDocument().IsBlockEmpty(
nStartX, rDoc.MaxRow() - nRangeSizeY,
nStartX + nRangeSizeX, rDoc.MaxRow(),
nStartTab ) )
nDisableShiftY = CellShiftDisabledFlags::Down;
if ( nDisableShiftX != CellShiftDisabledFlags::NONE || nDisableShiftY != CellShiftDisabledFlags::NONE)
pDlg->SetCellShiftDisabled( nDisableShiftX | nDisableShiftY );
}
}
}
if (pDlg->Execute() == RET_OK)
{
nFlags = pDlg->GetInsContentsCmdBits();
nFunction = pDlg->GetFormulaCmdBits();
bSkipEmpty = pDlg->IsSkipEmptyCells();
bTranspose = pDlg->IsTranspose();
bAsLink = pDlg->IsLink();
eMoveMode = pDlg->GetMoveMode();
}
}
else
pTabViewShell->ErrorMessage(aTester.GetMessageId());
}
if( nFlags != InsertDeleteFlags::NONE )
{
{
weld::WaitObject aWait( GetViewData().GetDialogParent() );
if ( bAsLink && bOtherDoc )
pTabViewShell->PasteFromSystem(SotClipboardFormatId::LINK); // DDE insert
else
{
pTabViewShell->PasteFromClip( nFlags, pOwnClip->GetDocument(),
nFunction, bSkipEmpty, bTranspose, bAsLink,
eMoveMode, InsertDeleteFlags::NONE, true ); // allow warning dialog
}
}
if( !pReqArgs )
{
OUString aFlags = FlagsToString( nFlags );
rReq.AppendItem( SfxStringItem( FID_INS_CELL_CONTENTS, aFlags ) );
rReq.AppendItem( SfxBoolItem( FN_PARAM_2, bSkipEmpty ) );
rReq.AppendItem( SfxBoolItem( FN_PARAM_3, bTranspose ) );
rReq.AppendItem( SfxBoolItem( FN_PARAM_4, bAsLink ) );
rReq.AppendItem( SfxUInt16Item( FN_PARAM_1, static_cast<sal_uInt16>(nFunction) ) );
rReq.AppendItem( SfxInt16Item( FN_PARAM_5, static_cast<sal_Int16>(eMoveMode) ) );
rReq.Done();
}
}
}
}
pTabViewShell->CellContentChanged(); // => PasteFromXXX ???
break;
case SID_PASTE_ONLY_VALUE:
case SID_PASTE_ONLY_TEXT:
case SID_PASTE_ONLY_FORMULA:
{
if ( ScTransferObj::GetOwnClipboard(ScTabViewShell::GetClipData(GetViewData().GetActiveWin())) ) // own cell data
{
rReq.SetSlot( FID_INS_CELL_CONTENTS );
OUString aFlags;
if ( nSlot == SID_PASTE_ONLY_VALUE )
aFlags = "V";
else if ( nSlot == SID_PASTE_ONLY_TEXT )
aFlags = "S";
else
aFlags = "F";
rReq.AppendItem( SfxStringItem( FID_INS_CELL_CONTENTS, aFlags ) );
ExecuteSlot( rReq, GetInterface() );
rReq.SetReturnValue(SfxInt16Item(nSlot, 1)); // 1 = success
pTabViewShell->CellContentChanged();
}
else
rReq.SetReturnValue(SfxInt16Item(nSlot, 0)); // 0 = fail
break;
}
case SID_PASTE_TRANSPOSED:
{
if (ScTransferObj::GetOwnClipboard(
ScTabViewShell::GetClipData(GetViewData().GetActiveWin()))) // own cell data
{
rReq.SetSlot(FID_INS_CELL_CONTENTS);
// By default content (values/numbers, strings, formulas and dates),
// attributes and notes are pasted
rReq.AppendItem(SfxBoolItem(FN_PARAM_3, true)); // transpose
ExecuteSlot(rReq, GetInterface());
rReq.SetReturnValue(SfxInt16Item(nSlot, 1)); // 1 = success
pTabViewShell->CellContentChanged();
}
else
rReq.SetReturnValue(SfxInt16Item(nSlot, 0)); // 0 = fail
break;
}
case SID_PASTE_AS_LINK:
{
if (ScTransferObj::GetOwnClipboard(
ScTabViewShell::GetClipData(GetViewData().GetActiveWin()))) // own cell data
{
rReq.SetSlot(FID_INS_CELL_CONTENTS);
// paste links to values/numbers, strings, formulas and dates
// do not paste attributes, notes and objects
rReq.AppendItem(SfxStringItem(FID_INS_CELL_CONTENTS, u"VSFD"_ustr));
rReq.AppendItem(SfxBoolItem(FN_PARAM_4, true)); // as link
ExecuteSlot(rReq, GetInterface());
rReq.SetReturnValue(SfxInt16Item(nSlot, 1)); // 1 = success
pTabViewShell->CellContentChanged();
}
else
rReq.SetReturnValue(SfxInt16Item(nSlot, 0)); // 0 = fail
break;
}
case SID_PASTE_TEXTIMPORT_DIALOG:
{
vcl::Window* pWin = GetViewData().GetActiveWin();
TransferableDataHelper aDataHelper(
TransferableDataHelper::CreateFromSystemClipboard(pWin));
const uno::Reference<datatransfer::XTransferable>& xTransferable
= aDataHelper.GetTransferable();
SotClipboardFormatId format = SotClipboardFormatId::STRING;
bool bSuccess = false;
if (xTransferable.is() && HasClipboardFormat(format))
{
OUString sStrBuffer;
bSuccess = aDataHelper.GetString(format, sStrBuffer);
if (bSuccess)
{
auto pStrm = std::make_shared<ScImportStringStream>(sStrBuffer);
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
VclPtr<AbstractScImportAsciiDlg> pDlg(pFact->CreateScImportAsciiDlg(
pWin ? pWin->GetFrameWeld() : nullptr, OUString(), pStrm.get(), SC_PASTETEXT));
ScRange aRange;
SCCOL nPosX = 0;
SCROW nPosY = 0;
if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE)
{
nPosX = aRange.aStart.Col();
nPosY = aRange.aStart.Row();
}
else
{
nPosX = GetViewData().GetCurX();
nPosY = GetViewData().GetCurY();
}
ScAddress aCellPos(nPosX, nPosY, GetViewData().GetTabNo());
auto pObj = std::make_shared<ScImportExport>(GetViewData().GetDocument(), aCellPos);
pObj->SetOverwriting(true);
if (pDlg->Execute()) {
ScAsciiOptions aOptions;
pDlg->GetOptions(aOptions);
pDlg->SaveParameters();
pObj->SetExtOptions(aOptions);
pObj->ImportString(sStrBuffer, format);
}
pDlg->disposeOnce();
rReq.SetReturnValue(SfxInt16Item(nSlot, 1)); // 1 = success, 0 = fail
rReq.Done();
}
}
if (!bSuccess)
{
rReq.SetReturnValue(SfxInt16Item(nSlot, 0)); // 0 = fail
rReq.Ignore();
}
}
break;
case SID_PASTE_SPECIAL:
// differentiate between own cell data and draw objects/external data
// this makes FID_INS_CELL_CONTENTS superfluous
{
vcl::Window* pWin = GetViewData().GetActiveWin();
css::uno::Reference<css::datatransfer::XTransferable2> xTransferable(ScTabViewShell::GetClipData(pWin));
// Clipboard-ID given as parameter? Basic "PasteSpecial(Format)"
const SfxPoolItem* pItem=nullptr;
if ( pReqArgs &&
pReqArgs->GetItemState(nSlot, true, &pItem) == SfxItemState::SET &&
dynamic_cast<const SfxUInt32Item*>( pItem) != nullptr )
{
SotClipboardFormatId nFormat = static_cast<SotClipboardFormatId>(static_cast<const SfxUInt32Item*>(pItem)->GetValue());
bool bRet=true;
{
weld::WaitObject aWait( GetViewData().GetDialogParent() );
bool bDraw = ( ScDrawTransferObj::GetOwnClipboard(xTransferable) != nullptr );
if ( bDraw && nFormat == SotClipboardFormatId::EMBED_SOURCE )
pTabViewShell->PasteDraw();
else
bRet = pTabViewShell->PasteFromSystem(nFormat, true); // TRUE: no error messages
}
if ( bRet )
{
rReq.SetReturnValue(SfxInt16Item(nSlot, 1)); // 1 = success, 0 = fail
rReq.Done();
}
else
// if format is not available -> fallback to request without parameters
pItem = nullptr;
}
if ( !pItem )
{
if ( ScTransferObj::GetOwnClipboard(xTransferable) ) // own cell data
{
rReq.SetSlot( FID_INS_CELL_CONTENTS );
ExecuteSlot( rReq, GetInterface() );
rReq.SetReturnValue(SfxInt16Item(nSlot, 1)); // 1 = success
}
else // draw objects or external data
{
bool bDraw = ( ScDrawTransferObj::GetOwnClipboard(xTransferable) != nullptr );
SvxClipboardFormatItem aFormats( SID_CLIPBOARD_FORMAT_ITEMS );
GetPossibleClipboardFormats( aFormats );
sal_uInt16 nFormatCount = aFormats.Count();
if ( nFormatCount )
{
SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
ScopedVclPtr<SfxAbstractPasteDialog> pDlg(pFact->CreatePasteDialog(pTabViewShell->GetFrameWeld()));
for (sal_uInt16 i=0; i<nFormatCount; i++)
{
SotClipboardFormatId nFormatId = aFormats.GetClipbrdFormatId( i );
OUString aName = aFormats.GetClipbrdFormatName( i );
// special case for paste dialog: '*' is replaced by object type
if ( nFormatId == SotClipboardFormatId::EMBED_SOURCE )
aName = "*";
pDlg->Insert( nFormatId, aName );
}
SfxViewFrame& rViewFrame = pTabViewShell->GetViewFrame();
auto xFrame = rViewFrame.GetFrame().GetFrameInterface();
const OUString aModuleName(vcl::CommandInfoProvider::GetModuleIdentifier(xFrame));
auto aProperties = vcl::CommandInfoProvider::GetCommandProperties(u".uno:PasteTextImportDialog"_ustr, aModuleName);
OUString sLabel(vcl::CommandInfoProvider::GetTooltipLabelForCommand(aProperties));
pDlg->InsertUno(u".uno:PasteTextImportDialog"_ustr, sLabel);
TransferableDataHelper aDataHelper(
TransferableDataHelper::CreateFromSystemClipboard( pWin ) );
SotClipboardFormatId nFormat = pDlg->GetFormat( aDataHelper.GetTransferable() );
if (nFormat != SotClipboardFormatId::NONE)
{
{
weld::WaitObject aWait( GetViewData().GetDialogParent() );
if ( bDraw && nFormat == SotClipboardFormatId::EMBED_SOURCE )
pTabViewShell->PasteDraw();
else
pTabViewShell->PasteFromSystem(nFormat);
}
rReq.SetReturnValue(SfxInt16Item(nSlot, 1)); // 1 = success
rReq.AppendItem( SfxUInt32Item( nSlot, static_cast<sal_uInt32>(nFormat) ) );
rReq.Done();
}
else
{
rReq.SetReturnValue(SfxInt16Item(nSlot, 0)); // 0 = fail
rReq.Ignore();
}
}
else
rReq.SetReturnValue(SfxInt16Item(nSlot, 0)); // 0 = fail
}
}
}
pTabViewShell->CellContentChanged(); // => PasteFromSystem() ???
break;
case SID_PASTE_UNFORMATTED:
// differentiate between own cell data and draw objects/external data
// this makes FID_INS_CELL_CONTENTS superfluous
{
weld::WaitObject aWait( GetViewData().GetDialogParent() );
// we should differentiate between SotClipboardFormatId::STRING and SotClipboardFormatId::STRING_TSVC,
// and paste the SotClipboardFormatId::STRING_TSVC if it is available.
// Which makes a difference if the clipboard contains cells with embedded line breaks.
SotClipboardFormatId nFormat = HasClipboardFormat( SotClipboardFormatId::STRING_TSVC) ?
SotClipboardFormatId::STRING_TSVC : SotClipboardFormatId::STRING;
const bool bRet = pTabViewShell->PasteFromSystem(nFormat, true); // TRUE: no error messages
if ( bRet )
{
rReq.SetReturnValue(SfxInt16Item(nSlot, 1)); // 1 = success
rReq.Done();
}
else
{
rReq.SetReturnValue(SfxInt16Item(nSlot, 0)); // 0 = fail
}
pTabViewShell->CellContentChanged(); // => PasteFromSystem() ???
}
break;
// other
case FID_INS_ROWBRK:
pTabViewShell->InsertPageBreak( false );
rReq.Done();
break;
case FID_INS_COLBRK:
pTabViewShell->InsertPageBreak( true );
rReq.Done();
break;
case FID_DEL_ROWBRK:
pTabViewShell->DeletePageBreak( false );
rReq.Done();
break;
case FID_DEL_COLBRK:
pTabViewShell->DeletePageBreak( true );
rReq.Done();
break;
case SID_DETECTIVE_ADD_PRED:
pTabViewShell->DetectiveAddPred();
rReq.Done();
break;
case SID_DETECTIVE_DEL_PRED:
pTabViewShell->DetectiveDelPred();
rReq.Done();
break;
case SID_DETECTIVE_ADD_SUCC:
pTabViewShell->DetectiveAddSucc();
rReq.Done();
break;
case SID_DETECTIVE_DEL_SUCC:
pTabViewShell->DetectiveDelSucc();
rReq.Done();
break;
case SID_DETECTIVE_ADD_ERR:
pTabViewShell->DetectiveAddError();
rReq.Done();
break;
case SID_DETECTIVE_INVALID:
pTabViewShell->DetectiveMarkInvalid();
rReq.Done();
break;
case SID_DETECTIVE_REFRESH:
pTabViewShell->DetectiveRefresh();
rReq.Done();
break;
case SID_DETECTIVE_MARK_PRED:
pTabViewShell->DetectiveMarkPred();
break;
case SID_DETECTIVE_MARK_SUCC:
pTabViewShell->DetectiveMarkSucc();
break;
case SID_INSERT_CURRENT_DATE:
pTabViewShell->InsertCurrentTime(
SvNumFormatType::DATE, ScResId(STR_UNDO_INSERT_CURRENT_DATE));
break;
case SID_INSERT_CURRENT_TIME:
pTabViewShell->InsertCurrentTime(
SvNumFormatType::TIME, ScResId(STR_UNDO_INSERT_CURRENT_TIME));
break;
case SID_SPELL_DIALOG:
{
SfxViewFrame& rViewFrame = pTabViewShell->GetViewFrame();
if( rReq.GetArgs() )
rViewFrame.SetChildWindow( SID_SPELL_DIALOG,
static_cast< const SfxBoolItem& >( rReq.GetArgs()->
Get( SID_SPELL_DIALOG ) ).GetValue() );
else
rViewFrame.ToggleChildWindow( SID_SPELL_DIALOG );
rViewFrame.GetBindings().Invalidate( SID_SPELL_DIALOG );
rReq.Ignore();
}
break;
case SID_HANGUL_HANJA_CONVERSION:
pTabViewShell->DoHangulHanjaConversion();
break;
case SID_CHINESE_CONVERSION:
{
//open ChineseTranslationDialog
Reference< XComponentContext > xContext(
::cppu::defaultBootstrap_InitialComponentContext() ); //@todo get context from calc if that has one
if(xContext.is())
{
Reference< lang::XMultiComponentFactory > xMCF( xContext->getServiceManager() );
if(xMCF.is())
{
Reference< ui::dialogs::XExecutableDialog > xDialog(
xMCF->createInstanceWithContext(
u"com.sun.star.linguistic2.ChineseTranslationDialog"_ustr
, xContext),
UNO_QUERY);
Reference< lang::XInitialization > xInit( xDialog, UNO_QUERY );
if( xInit.is() )
{
// initialize dialog
uno::Sequence<uno::Any> aSeq(comphelper::InitAnyPropertySequence(
{
{"ParentWindow", uno::Any(Reference< awt::XWindow >())}
}));
xInit->initialize( aSeq );
//execute dialog
sal_Int16 nDialogRet = xDialog->execute();
if( RET_OK == nDialogRet )
{
//get some parameters from the dialog
bool bToSimplified = true;
bool bUseVariants = true;
bool bCommonTerms = true;
Reference< beans::XPropertySet > xProp( xDialog, UNO_QUERY );
if( xProp.is() )
{
try
{
xProp->getPropertyValue(u"IsDirectionToSimplified"_ustr) >>= bToSimplified;
xProp->getPropertyValue(u"IsUseCharacterVariants"_ustr) >>= bUseVariants;
xProp->getPropertyValue(u"IsTranslateCommonTerms"_ustr) >>= bCommonTerms;
}
catch( Exception& )
{
}
}
//execute translation
LanguageType eSourceLang = bToSimplified ? LANGUAGE_CHINESE_TRADITIONAL : LANGUAGE_CHINESE_SIMPLIFIED;
LanguageType eTargetLang = bToSimplified ? LANGUAGE_CHINESE_SIMPLIFIED : LANGUAGE_CHINESE_TRADITIONAL;
sal_Int32 nOptions = bUseVariants ? i18n::TextConversionOption::USE_CHARACTER_VARIANTS : 0;
if( !bCommonTerms )
nOptions |= i18n::TextConversionOption::CHARACTER_BY_CHARACTER;
vcl::Font aTargetFont = OutputDevice::GetDefaultFont(
DefaultFontType::CJK_SPREADSHEET,
eTargetLang, GetDefaultFontFlags::OnlyOne );
ScConversionParam aConvParam( SC_CONVERSION_CHINESE_TRANSL,
eSourceLang, eTargetLang, std::move(aTargetFont), nOptions, false );
pTabViewShell->DoSheetConversion( aConvParam );
}
}
Reference< lang::XComponent > xComponent( xDialog, UNO_QUERY );
if( xComponent.is() )
xComponent->dispose();
}
}
}
break;
case SID_CONVERT_FORMULA_TO_VALUE:
{
pTabViewShell->ConvertFormulaToValue();
}
break;
case SID_THESAURUS:
pTabViewShell->DoThesaurus();
break;
case SID_TOGGLE_REL:
pTabViewShell->DoRefConversion();
break;
case SID_DEC_INDENT:
pTabViewShell->ChangeIndent( false );
break;
case SID_INC_INDENT:
pTabViewShell->ChangeIndent( true );
break;
case FID_USE_NAME:
{
CreateNameFlags nFlags = pTabViewShell->GetCreateNameFlags();
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScopedVclPtr<AbstractScNameCreateDlg> pDlg(pFact->CreateScNameCreateDlg(pTabViewShell->GetFrameWeld(), nFlags));
if( pDlg->Execute() )
{
pTabViewShell->CreateNames(pDlg->GetFlags());
rReq.Done();
}
}
break;
case SID_CONSOLIDATE:
{
const ScConsolidateItem* pItem;
if ( pReqArgs && (pItem =
pReqArgs->GetItemIfSet( SCITEM_CONSOLIDATEDATA )) )
{
const ScConsolidateParam& rParam = pItem->GetData();
pTabViewShell->Consolidate( rParam );
GetViewData().GetDocument().SetConsolidateDlgData( std::unique_ptr<ScConsolidateParam>(new ScConsolidateParam(rParam)) );
rReq.Done();
}
#if HAVE_FEATURE_SCRIPTING
else if (rReq.IsAPI())
SbxBase::SetError(ERRCODE_BASIC_BAD_PARAMETER);
#endif
}
break;
case SID_INS_FUNCTION:
{
const SfxBoolItem* pOkItem = static_cast<const SfxBoolItem*>(&pReqArgs->Get( SID_DLG_RETOK ));
if ( pOkItem->GetValue() ) // OK
{
OUString aFormula;
const SfxStringItem* pSItem = &pReqArgs->Get( SCITEM_STRING );
const SfxBoolItem* pMatrixItem = static_cast<const SfxBoolItem*>(&pReqArgs->Get( SID_DLG_MATRIX ));
aFormula += pSItem->GetValue();
pScMod->ActivateInputWindow( &aFormula, pMatrixItem->GetValue() );
}
else // CANCEL
{
pScMod->ActivateInputWindow();
}
rReq.Ignore(); // only SID_ENTER_STRING is recorded
}
break;
case FID_DEFINE_NAME:
case FID_DEFINE_CURRENT_NAME:
if ( pReqArgs )
{
const SfxPoolItem* pItem;
OUString aName, aSymbol, aAttrib;
if( pReqArgs->HasItem( FID_DEFINE_NAME, &pItem ) )
aName = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( pReqArgs->HasItem( FN_PARAM_1, &pItem ) )
aSymbol = static_cast<const SfxStringItem*>(pItem)->GetValue();
if( pReqArgs->HasItem( FN_PARAM_2, &pItem ) )
aAttrib = static_cast<const SfxStringItem*>(pItem)->GetValue();
if ( !aName.isEmpty() && !aSymbol.isEmpty() )
{
if (pTabViewShell->InsertName( aName, aSymbol, aAttrib ))
rReq.Done();
#if HAVE_FEATURE_SCRIPTING
else
SbxBase::SetError( ERRCODE_BASIC_BAD_PARAMETER ); // Basic-error
#endif
}
}
else
{
sal_uInt16 nId = ScNameDlgWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case FID_ADD_NAME:
{
sal_uInt16 nId = ScNameDefDlgWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_OPENDLG_CONDFRMT:
case SID_OPENDLG_CURRENTCONDFRMT:
case SID_OPENDLG_COLORSCALE:
case SID_OPENDLG_DATABAR:
case SID_OPENDLG_ICONSET:
case SID_OPENDLG_CONDDATE:
{
sal_uInt32 nIndex = sal_uInt32(-1);
bool bManaged = false;
const std::shared_ptr<ScCondFormatDlgData>& rDlgItem(pTabViewShell->getScCondFormatDlgItem());
if (rDlgItem)
{
nIndex = rDlgItem->GetIndex();
bManaged = true;
}
// Check if the Conditional Manager Dialog is editing or adding
// conditional format item.
if ( bManaged )
{
sal_uInt16 nId = ScCondFormatDlgWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
break;
}
ScRangeList aRangeList;
ScViewData& rData = GetViewData();
rData.GetMarkData().FillRangeListWithMarks(&aRangeList, false);
ScDocument& rDoc = GetViewData().GetDocument();
if(rDoc.IsTabProtected(rData.GetTabNo()))
{
pTabViewShell->ErrorMessage( STR_ERR_CONDFORMAT_PROTECTED );
break;
}
ScAddress aPos(rData.GetCurX(), rData.GetCurY(), rData.GetTabNo());
if(aRangeList.empty())
{
aRangeList.push_back(ScRange(aPos));
}
// try to find an existing conditional format
const ScPatternAttr* pPattern = rDoc.GetPattern(aPos.Col(), aPos.Row(), aPos.Tab());
ScConditionalFormatList* pList = rDoc.GetCondFormList(aPos.Tab());
const ScCondFormatIndexes& rCondFormats = pPattern->GetItem(ATTR_CONDITIONAL).GetCondFormatData();
bool bContainsCondFormat = !rCondFormats.empty();
bool bCondFormatDlg = false;
bool bContainsExistingCondFormat = false;
if(bContainsCondFormat)
{
for (const auto& rCondFormat : rCondFormats)
{
// check if at least one existing conditional format has the same range
const ScConditionalFormat* pCondFormat = pList->GetFormat(rCondFormat);
if(!pCondFormat)
continue;
bContainsExistingCondFormat = true;
const ScRangeList& rCondFormatRange = pCondFormat->GetRange();
if(rCondFormatRange == aRangeList)
{
// found a matching range, edit this conditional format
bCondFormatDlg = true;
nIndex = pCondFormat->GetKey();
break;
}
}
}
// do we have a parameter with the conditional formatting type?
const SfxInt16Item* pParam = rReq.GetArg<SfxInt16Item>(FN_PARAM_1);
if (pParam)
{
auto pFormat = std::make_unique<ScConditionalFormat>(0, &rDoc);
pFormat->SetRange(aRangeList);
if (nSlot == SID_OPENDLG_ICONSET)
{
ScIconSetType eIconSetType = limit_cast<ScIconSetType>(pParam->GetValue(), IconSet_3Arrows, IconSet_5Boxes);
const int nSteps = ScIconSetFormat::getIconSetElements(eIconSetType);
ScIconSetFormat* pEntry = new ScIconSetFormat(&rDoc);
ScIconSetFormatData* pIconSetFormatData = new ScIconSetFormatData(eIconSetType);
pIconSetFormatData->m_Entries.emplace_back(new ScColorScaleEntry(0, COL_RED, COLORSCALE_PERCENT));
pIconSetFormatData->m_Entries.emplace_back(new ScColorScaleEntry(round(100. / nSteps), COL_BROWN, COLORSCALE_PERCENT));
pIconSetFormatData->m_Entries.emplace_back(new ScColorScaleEntry(round(200. / nSteps), COL_YELLOW, COLORSCALE_PERCENT));
if (nSteps > 3)
pIconSetFormatData->m_Entries.emplace_back(new ScColorScaleEntry(round(300. / nSteps), COL_WHITE, COLORSCALE_PERCENT));
if (nSteps > 4)
pIconSetFormatData->m_Entries.emplace_back(new ScColorScaleEntry(round(400. / nSteps), COL_GREEN, COLORSCALE_PERCENT));
pEntry->SetIconSetData(pIconSetFormatData);
pFormat->AddEntry(pEntry);
}
else if (nSlot == SID_OPENDLG_COLORSCALE)
{
typedef std::tuple<double, Color, ScColorScaleEntryType> ScaleEntry;
static std::vector<std::vector<ScaleEntry>> aScaleThemes =
{
{
{ 0, Color(0xF8696B), COLORSCALE_MIN },
{ 0, Color(0x63BE7B), COLORSCALE_MAX },
{ 50, Color(0xFFEB84), COLORSCALE_PERCENTILE }
},
{
{ 0, Color(0x63BE7B), COLORSCALE_MIN },
{ 0, Color(0xF8696B), COLORSCALE_MAX },
{ 50, Color(0xFFEB84), COLORSCALE_PERCENTILE }
},
{
{ 0, Color(0xF8696B), COLORSCALE_MIN },
{ 0, Color(0x63BE7B), COLORSCALE_MAX },
{ 50, Color(0xFCFCFF), COLORSCALE_PERCENTILE }
},
{
{ 0, Color(0x63BE7B), COLORSCALE_MIN },
{ 0, Color(0xF8696B), COLORSCALE_MAX },
{ 50, Color(0xFCFCFF), COLORSCALE_PERCENTILE }
},
{
{ 0, Color(0xF8696B), COLORSCALE_MIN },
{ 0, Color(0x5A8AC6), COLORSCALE_MAX },
{ 50, Color(0xFCFCFF), COLORSCALE_PERCENTILE }
},
{
{ 0, Color(0x5A8AC6), COLORSCALE_MIN },
{ 0, Color(0xF8696B), COLORSCALE_MAX },
{ 50, Color(0xFCFCFF), COLORSCALE_PERCENTILE }
},
{
{ 0, Color(0xF8696B), COLORSCALE_MIN },
{ 0, Color(0xFCFCFF), COLORSCALE_MAX }
},
{
{ 0, Color(0xFCFCFF), COLORSCALE_MIN },
{ 0, Color(0xF8696B), COLORSCALE_MAX }
},
{
{ 0, Color(0x63BE7B), COLORSCALE_MIN },
{ 0, Color(0xFCFCFF), COLORSCALE_MAX }
},
{
{ 0, Color(0xFCFCFF), COLORSCALE_MIN },
{ 0, Color(0x63BE7B), COLORSCALE_MAX }
},
{
{ 0, Color(0x63BE7B), COLORSCALE_MIN },
{ 0, Color(0xFFEF9C), COLORSCALE_MAX }
},
{
{ 0, Color(0xFFEF9C), COLORSCALE_MIN },
{ 0, Color(0x63BE7B), COLORSCALE_MAX }
}
};
sal_uInt16 nTheme = pParam->GetValue();
if (nTheme < aScaleThemes.size())
{
ScColorScaleFormat* pFormatEntry = new ScColorScaleFormat(&rDoc);
auto& aTheme = aScaleThemes[nTheme];
ScColorScaleEntry* pMin = new ScColorScaleEntry(std::get<0>(aTheme[0]), std::get<1>(aTheme[0]), std::get<2>(aTheme[0]));
ScColorScaleEntry* pMax = new ScColorScaleEntry(std::get<0>(aTheme[1]), std::get<1>(aTheme[1]), std::get<2>(aTheme[1]));
pFormatEntry->AddEntry(pMin);
// COLORSCALE_PERCENTILE has to be in the middle
if (aTheme.size() > 2)
{
ScColorScaleEntry* pPer = new ScColorScaleEntry(std::get<0>(aTheme[2]), std::get<1>(aTheme[2]), std::get<2>(aTheme[2]));
pFormatEntry->AddEntry(pPer);
}
pFormatEntry->AddEntry(pMax);
pFormat->AddEntry(pFormatEntry);
}
}
else if (nSlot == SID_OPENDLG_DATABAR)
{
typedef std::tuple<Color, bool> DatabarEntry;
static std::vector<DatabarEntry> aDatabarThemes =
{
{ Color(0x638EC6), true },
{ Color(0x63C384), true },
{ Color(0xFF555A), true },
{ Color(0xFFB628), true },
{ Color(0x008AEF), true },
{ Color(0xD6007B), true },
{ Color(0x638EC6), false },
{ Color(0x63C384), false },
{ Color(0xFF555A), false },
{ Color(0xFFB628), false },
{ Color(0x008AEF), false },
{ Color(0xD6007B), false }
};
sal_uInt16 nTheme = pParam->GetValue();
if (nTheme < aDatabarThemes.size())
{
ScDataBarFormat* pFormatEntry = new ScDataBarFormat(&rDoc);
auto& aTheme = aDatabarThemes[nTheme];
ScDataBarFormatData* pData = new ScDataBarFormatData();
pData->maPositiveColor = std::get<0>(aTheme);
pData->mbGradient = std::get<1>(aTheme);
pData->mxNegativeColor = Color(0xFF0000);
pData->mpLowerLimit.reset(new ScColorScaleEntry(0, 0, COLORSCALE_AUTO));
pData->mpUpperLimit.reset(new ScColorScaleEntry(0, 0, COLORSCALE_AUTO));
pFormatEntry->SetDataBarData(pData);
pFormat->AddEntry(pFormatEntry);
}
}
// use the new conditional formatting
GetViewData().GetDocShell()->GetDocFunc().ReplaceConditionalFormat(nIndex, std::move(pFormat), aPos.Tab(), aRangeList);
break;
}
// if not found a conditional format ask whether we should edit one of the existing
// or should create a new overlapping conditional format
if(bContainsCondFormat && !bCondFormatDlg && bContainsExistingCondFormat)
{
std::shared_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(pTabViewShell->GetFrameWeld(),
VclMessageType::Question, VclButtonsType::YesNo,
ScResId(STR_EDIT_EXISTING_COND_FORMATS), pTabViewShell));
xQueryBox->set_default_response(RET_YES);
xQueryBox->runAsync(xQueryBox, [this, nIndex, nSlot, aPos, pTabViewShell] (int nResult) {
sal_uInt32 nNewIndex = nIndex;
bool bNewCondFormatDlg = false;
// use fresh data
ScDocument& rInnerDoc = GetViewData().GetDocument();
const ScPatternAttr* pInnerPattern = rInnerDoc.GetPattern(aPos.Col(), aPos.Row(), aPos.Tab());
ScConditionalFormatList* pInnerList = rInnerDoc.GetCondFormList(aPos.Tab());
const ScCondFormatIndexes& rInnerCondFormats = pInnerPattern->GetItem(ATTR_CONDITIONAL).GetCondFormatData();
bool bInnerContainsCondFormat = !rInnerCondFormats.empty();
bool bEditExisting = nResult == RET_YES;
if (bEditExisting)
{
// differentiate between ranges where one conditional format is defined
// and several formats are defined
// if we have only one => open the cond format dlg to edit it
// otherwise open the manage cond format dlg
if (rInnerCondFormats.size() == 1)
{
const ScConditionalFormat* pCondFormat = pInnerList->GetFormat(rInnerCondFormats[0]);
assert(pCondFormat);
nNewIndex = pCondFormat->GetKey();
bNewCondFormatDlg = true;
}
else
{
// Queue message to open Conditional Format Manager Dialog.
GetViewData().GetDispatcher().Execute(
SID_OPENDLG_CONDFRMT_MANAGER, SfxCallMode::ASYNCHRON);
return;
}
}
else
{
// define an overlapping conditional format
assert(pInnerList->GetFormat(rInnerCondFormats[0]));
bNewCondFormatDlg = true;
}
HandleConditionalFormat(nNewIndex, bNewCondFormatDlg, bInnerContainsCondFormat,
nSlot, pTabViewShell);
});
}
else
{
HandleConditionalFormat(nIndex, bCondFormatDlg, bContainsCondFormat, nSlot, pTabViewShell);
}
}
break;
case SID_DEFINE_COLROWNAMERANGES:
{
sal_uInt16 nId = ScColRowNameRangesDlgWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
break;
case SID_UPDATECHART:
{
bool bAll = false;
if( pReqArgs )
{
const SfxPoolItem* pItem;
if( pReqArgs->HasItem( SID_UPDATECHART, &pItem ) )
bAll = static_cast<const SfxBoolItem*>(pItem)->GetValue();
}
pTabViewShell->UpdateCharts( bAll );
if( ! rReq.IsAPI() )
{
rReq.AppendItem( SfxBoolItem( SID_UPDATECHART, bAll ) );
rReq.Done();
}
}
break;
case SID_TABOP:
if (pReqArgs)
{
const ScTabOpItem& rItem =
static_cast<const ScTabOpItem&>(
pReqArgs->Get( SID_TABOP ));
pTabViewShell->TabOp( rItem.GetData() );
rReq.Done( *pReqArgs );
}
break;
case SID_SOLVE:
if (pReqArgs)
{
const ScSolveItem& rItem =
pReqArgs->Get( SCITEM_SOLVEDATA );
pTabViewShell->Solve( rItem.GetData() );
rReq.Done( *pReqArgs );
}
break;
case FID_INSERT_NAME:
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScopedVclPtr<AbstractScNamePasteDlg> pDlg(pFact->CreateScNamePasteDlg(pTabViewShell->GetFrameWeld(), GetViewData().GetDocShell()));
switch( pDlg->Execute() )
{
case BTN_PASTE_LIST:
pTabViewShell->InsertNameList();
break;
case BTN_PASTE_NAME:
{
ScInputHandler* pHdl = pScMod->GetInputHdl( pTabViewShell );
if (pHdl)
{
// "=" in KeyEvent, switches to input-mode
(void)pScMod->InputKeyEvent( KeyEvent('=', vcl::KeyCode()) );
std::vector<OUString> aNames = pDlg->GetSelectedNames();
if (!aNames.empty())
{
OUStringBuffer aBuffer;
for (const auto& rName : aNames)
{
aBuffer.append(rName + " ");
}
pHdl->InsertFunction( aBuffer.makeStringAndClear(), false ); // without "()"
}
}
}
break;
}
}
break;
case SID_RANGE_NOTETEXT:
if (pReqArgs)
{
const SfxStringItem& rTextItem = pReqArgs->Get( SID_RANGE_NOTETEXT );
// always cursor position
ScAddress aPos( GetViewData().GetCurX(), GetViewData().GetCurY(), GetViewData().GetTabNo() );
pTabViewShell->SetNoteText( aPos, rTextItem.GetValue() );
rReq.Done();
}
break;
case SID_INSERT_POSTIT:
case SID_EDIT_POSTIT:
{
const SvxPostItTextItem* pTextItem;
if ( pReqArgs && (pTextItem = pReqArgs->GetItemIfSet( SID_ATTR_POSTIT_TEXT )) )
{
OUString aCellId;
// SID_ATTR_POSTIT_ID only argument for SID_EDIT_POSTIT
if (const SvxPostItIdItem* pCellId = pReqArgs->GetItemIfSet( SID_ATTR_POSTIT_ID ))
aCellId = pCellId->GetValue();
const SvxPostItAuthorItem* pAuthorItem = pReqArgs->GetItem( SID_ATTR_POSTIT_AUTHOR );
const SvxPostItDateItem* pDateItem = pReqArgs->GetItem( SID_ATTR_POSTIT_DATE );
if (!aCellId.isEmpty())
{
SetTabNoAndCursor( GetViewData(), aCellId );
}
ScAddress aPos( GetViewData().GetCurX(), GetViewData().GetCurY(), GetViewData().GetTabNo() );
pTabViewShell->ReplaceNote( aPos, pTextItem->GetValue(),
pAuthorItem ? &pAuthorItem->GetValue() : nullptr,
pDateItem ? &pDateItem->GetValue() : nullptr );
}
else if (!comphelper::LibreOfficeKit::isActive() || comphelper::LibreOfficeKit::isTiledAnnotations())
{
pTabViewShell->EditNote(); // note object to edit
}
rReq.Done();
}
break;
case FID_NOTE_VISIBLE:
{
ScDocument& rDoc = GetViewData().GetDocument();
ScAddress aPos( GetViewData().GetCurX(), GetViewData().GetCurY(), GetViewData().GetTabNo() );
if( ScPostIt* pNote = rDoc.GetNote(aPos) )
{
bool bShow;
const SfxPoolItem* pItem;
if ( pReqArgs && (pReqArgs->GetItemState( FID_NOTE_VISIBLE, true, &pItem ) == SfxItemState::SET) )
bShow = static_cast<const SfxBoolItem*>(pItem)->GetValue();
else
bShow = !pNote->IsCaptionShown();
pTabViewShell->ShowNote( bShow );
if (!pReqArgs)
rReq.AppendItem( SfxBoolItem( FID_NOTE_VISIBLE, bShow ) );
rReq.Done();
rBindings.Invalidate( FID_NOTE_VISIBLE );
}
else
rReq.Ignore();
}
break;
case FID_HIDE_NOTE:
case FID_SHOW_NOTE:
{
bool bShowNote = nSlot == FID_SHOW_NOTE;
ScViewData& rData = GetViewData();
ScDocument& rDoc = rData.GetDocument();
ScMarkData& rMark = rData.GetMarkData();
if (!rMark.IsMarked() && !rMark.IsMultiMarked())
{
// Check current cell
ScAddress aPos( rData.GetCurX(), rData.GetCurY(), rData.GetTabNo() );
if( rDoc.GetNote(aPos) )
{
rData.GetDocShell()->GetDocFunc().ShowNote( aPos, bShowNote );
}
}
else
{
// Check selection range
bool bDone = false;
ScRangeListRef aRangesRef;
rData.GetMultiArea(aRangesRef);
const ScRangeList aRanges = *aRangesRef;
OUString aUndo = ScResId( bShowNote ? STR_UNDO_SHOWNOTE : STR_UNDO_HIDENOTE );
rData.GetDocShell()->GetUndoManager()->EnterListAction( aUndo, aUndo, 0, rData.GetViewShell()->GetViewShellId() );
for (auto const& rTab : rMark.GetSelectedTabs())
{
// get notes
std::vector<sc::NoteEntry> aNotes;
rDoc.GetAllNoteEntries(rTab, aNotes);
for (const sc::NoteEntry& rNote : aNotes)
{
// check if note is in our selection range
const ScAddress& rAdr = rNote.maPos;
const ScRange* rRange = aRanges.Find(rAdr);
if (! rRange)
continue;
// check if cell is editable
const SCTAB nRangeTab = rRange->aStart.Tab();
if (rDoc.IsBlockEditable( nRangeTab, rAdr.Col(), rAdr.Row(), rAdr.Col(), rAdr.Row() ))
{
rData.GetDocShell()->GetDocFunc().ShowNote( rAdr, bShowNote );
bDone = true;
}
}
}
rData.GetDocShell()->GetUndoManager()->LeaveListAction();
if ( bDone )
{
rReq.Done();
rBindings.Invalidate( nSlot );
}
else
rReq.Ignore();
}
}
break;
case FID_SHOW_ALL_NOTES:
case FID_HIDE_ALL_NOTES:
{
bool bShowNote = nSlot == FID_SHOW_ALL_NOTES;
ScViewData& rData = GetViewData();
ScMarkData& rMark = rData.GetMarkData();
ScDocument& rDoc = rData.GetDocument();
std::vector<sc::NoteEntry> aNotes;
OUString aUndo = ScResId( bShowNote ? STR_UNDO_SHOWALLNOTES : STR_UNDO_HIDEALLNOTES );
rData.GetDocShell()->GetUndoManager()->EnterListAction( aUndo, aUndo, 0, rData.GetViewShell()->GetViewShellId() );
for (auto const& rTab : rMark.GetSelectedTabs())
{
rDoc.GetAllNoteEntries(rTab, aNotes);
}
for (const sc::NoteEntry& rNote : aNotes)
{
const ScAddress& rAdr = rNote.maPos;
rData.GetDocShell()->GetDocFunc().ShowNote( rAdr, bShowNote );
}
rData.GetDocShell()->GetUndoManager()->LeaveListAction();
}
break;
case SID_TOGGLE_NOTES:
{
ScViewData& rData = GetViewData();
ScMarkData& rMark = rData.GetMarkData();
ScDocument& rDoc = rData.GetDocument();
ScRangeList aRanges;
std::vector<sc::NoteEntry> aNotes;
for (auto const& rTab : rMark.GetSelectedTabs())
aRanges.push_back(ScRange(0,0,rTab,rDoc.MaxCol(),rDoc.MaxRow(),rTab));
CommentCaptionState eState = rDoc.GetAllNoteCaptionsState( aRanges );
rDoc.GetNotesInRange(aRanges, aNotes);
bool bShowNote = (eState == ALLHIDDEN || eState == MIXED);
OUString aUndo = ScResId( bShowNote ? STR_UNDO_SHOWALLNOTES : STR_UNDO_HIDEALLNOTES );
rData.GetDocShell()->GetUndoManager()->EnterListAction( aUndo, aUndo, 0, rData.GetViewShell()->GetViewShellId() );
for(const auto& rNote : aNotes)
{
const ScAddress& rAdr = rNote.maPos;
rData.GetDocShell()->GetDocFunc().ShowNote( rAdr, bShowNote );
}
rData.GetDocShell()->GetUndoManager()->LeaveListAction();
if (!pReqArgs)
rReq.AppendItem( SfxBoolItem( SID_TOGGLE_NOTES, bShowNote ) );
rReq.Done();
rBindings.Invalidate( SID_TOGGLE_NOTES );
}
break;
case SID_DELETE_NOTE:
{
const SvxPostItIdItem* pIdItem;
// If Id is mentioned, select the appropriate cell first
if ( pReqArgs && (pIdItem = pReqArgs->GetItemIfSet( SID_ATTR_POSTIT_ID )) )
{
const OUString& aCellId = pIdItem->GetValue();
if (!aCellId.isEmpty())
{
SetTabNoAndCursor( GetViewData(), aCellId );
}
}
pTabViewShell->DeleteContents( InsertDeleteFlags::NOTE ); // delete all notes in selection
rReq.Done();
}
break;
case FID_DELETE_ALL_NOTES:
{
ScViewData& rData = GetViewData();
ScMarkData& rMark = rData.GetMarkData();
ScDocument& rDoc = rData.GetDocument();
ScMarkData aNewMark(rDoc.GetSheetLimits());
ScRangeList aRangeList;
for (auto const& rTab : rMark.GetSelectedTabs())
{
aRangeList.push_back(ScRange(0,0,rTab,rDoc.MaxCol(),rDoc.MaxRow(),rTab));
}
aNewMark.MarkFromRangeList( aRangeList, true );
rData.GetDocShell()->GetDocFunc().DeleteContents(aNewMark, InsertDeleteFlags::NOTE, true, false );
}
break;
case SID_CHARMAP:
if( pReqArgs != nullptr )
{
OUString aChars, aFontName;
const SfxItemSet *pArgs = rReq.GetArgs();
const SfxPoolItem* pItem = nullptr;
if ( pArgs )
pArgs->GetItemState(SID_CHARMAP, false, &pItem);
if ( pItem )
{
const SfxStringItem* pStringItem = dynamic_cast<const SfxStringItem*>( pItem );
if ( pStringItem )
aChars = pStringItem->GetValue();
const SfxStringItem* pFontItem =
pArgs->GetItemIfSet( SID_ATTR_SPECIALCHAR, false);
if ( pFontItem )
aFontName = pFontItem->GetValue();
}
if ( !aChars.isEmpty() )
{
vcl::Font aFont;
pTabViewShell->GetSelectionPattern()->fillFontOnly(aFont, nullptr, nullptr, nullptr,
pTabViewShell->GetSelectionScriptType() );
if ( !aFontName.isEmpty() )
aFont = vcl::Font( aFontName, Size(1,1) );
pTabViewShell->InsertSpecialChar( aChars, aFont );
if( ! rReq.IsAPI() )
rReq.Done();
}
}
else
{
SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
// font color doesn't matter here
vcl::Font aCurFont;
pTabViewShell->GetSelectionPattern()->fillFontOnly(aCurFont, nullptr, nullptr, nullptr,
pTabViewShell->GetSelectionScriptType());
SfxAllItemSet aSet( GetPool() );
aSet.Put( SfxBoolItem( FN_PARAM_1, false ) );
aSet.Put( SvxFontItem( aCurFont.GetFamilyType(), aCurFont.GetFamilyName(), aCurFont.GetStyleName(), aCurFont.GetPitch(), aCurFont.GetCharSet(), GetPool().GetWhichIDFromSlotID(SID_ATTR_CHAR_FONT) ) );
SfxViewFrame& rViewFrame = pTabViewShell->GetViewFrame();
auto xFrame = rViewFrame.GetFrame().GetFrameInterface();
VclPtr<SfxAbstractDialog> pDlg(pFact->CreateCharMapDialog(pTabViewShell->GetFrameWeld(), aSet, xFrame));
pDlg->StartExecuteAsync(
[pDlg] (sal_Int32 /*nResult*/)->void
{
pDlg->disposeOnce();
}
);
}
break;
case SID_SELECT_SCENARIO:
{
// Testing
if ( pReqArgs )
{
const SfxStringItem& rItem = pReqArgs->Get(SID_SELECT_SCENARIO);
pTabViewShell->UseScenario(rItem.GetValue());
//! why should the return value be valid?!?!
rReq.SetReturnValue(SfxStringItem(SID_SELECT_SCENARIO, rItem.GetValue()));
rReq.Done();
}
}
break;
case SID_HYPERLINK_SETLINK:
if( pReqArgs )
{
const SfxPoolItem* pItem;
if( pReqArgs->HasItem( SID_HYPERLINK_SETLINK, &pItem ) )
{
const SvxHyperlinkItem* pHyper = static_cast<const SvxHyperlinkItem*>(pItem);
const OUString& rName = pHyper->GetName();
const OUString& rURL = pHyper->GetURL();
const OUString& rTarget = pHyper->GetTargetFrame();
sal_uInt16 nType = static_cast<sal_uInt16>(pHyper->GetInsertMode());
pTabViewShell->InsertURL( rName, rURL, rTarget, nType );
rReq.Done();
}
else
rReq.Ignore();
}
break;
case SID_OPENDLG_CONDFRMT_MANAGER:
case SID_OPENDLG_CURRENTCONDFRMT_MANAGER:
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
ScViewData& rData = GetViewData();
ScDocument& rDoc = rData.GetDocument();
if (rDoc.IsTabProtected(rData.GetTabNo()))
{
pTabViewShell->ErrorMessage( STR_ERR_CONDFORMAT_PROTECTED );
break;
}
ScAddress aPos(rData.GetCurX(), rData.GetCurY(), rData.GetTabNo());
ScConditionalFormatList* pList = nullptr;
const std::shared_ptr<ScCondFormatDlgData>& rDlgItem(pTabViewShell->getScCondFormatDlgItem());
if (rDlgItem)
{
pList = rDlgItem->GetConditionalFormatList();
}
if (!pList)
pList = rDoc.GetCondFormList( aPos.Tab() );
VclPtr<AbstractScCondFormatManagerDlg> pDlg(pFact->CreateScCondFormatMgrDlg(
pTabViewShell->GetFrameWeld(), rDoc, pList));
if (rDlgItem)
pDlg->SetModified();
pDlg->StartExecuteAsync(
[pDlg, &rData, pTabViewShell, rDlgItem, aPos](sal_Int32 nRet)
{
std::unique_ptr<ScConditionalFormatList> pCondFormatList
= pDlg->GetConditionalFormatList();
if (nRet == RET_OK && pDlg->CondFormatsChanged())
{
rData.GetDocShell()->GetDocFunc().SetConditionalFormatList(
pCondFormatList.release(), aPos.Tab());
}
else if (nRet == DLG_RET_ADD)
{
pDlg->ShowEasyConditionalDialog();
}
else if (nRet == DLG_RET_EDIT)
{
pDlg->ShowEasyConditionalDialog(true);
}
else
pCondFormatList.reset();
if (rDlgItem)
pTabViewShell->setScCondFormatDlgItem(nullptr);
pDlg->disposeOnce();
});
}
break;
case SID_EXTERNAL_SOURCE:
{
const SfxStringItem* pFile = rReq.GetArg<SfxStringItem>(SID_FILE_NAME);
const SfxStringItem* pSource = rReq.GetArg<SfxStringItem>(FN_PARAM_1);
if ( pFile && pSource )
{
OUString aFile;
OUString aFilter;
OUString aOptions;
OUString aSource;
sal_Int32 nRefreshDelaySeconds=0;
aFile = pFile->GetValue();
aSource = pSource->GetValue();
const SfxStringItem* pFilter = rReq.GetArg<SfxStringItem>(SID_FILTER_NAME);
if ( pFilter )
aFilter = pFilter->GetValue();
const SfxStringItem* pOptions = rReq.GetArg<SfxStringItem>(SID_FILE_FILTEROPTIONS);
if ( pOptions )
aOptions = pOptions->GetValue();
const SfxUInt32Item* pRefresh = rReq.GetArg<SfxUInt32Item>(FN_PARAM_2);
if ( pRefresh )
nRefreshDelaySeconds = pRefresh->GetValue();
ExecuteExternalSource( aFile, aFilter, aOptions, aSource, nRefreshDelaySeconds, rReq );
}
else
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
pImpl->m_pLinkedDlg.disposeAndClear();
pImpl->m_pLinkedDlg =
pFact->CreateScLinkedAreaDlg(pTabViewShell->GetFrameWeld());
delete pImpl->m_pRequest;
pImpl->m_pRequest = new SfxRequest( rReq );
OUString sFile, sFilter, sOptions, sSource;
sal_Int32 nRefreshDelaySeconds = 0;
if (pImpl->m_pLinkedDlg->Execute() == RET_OK)
{
sFile = pImpl->m_pLinkedDlg->GetURL();
sFilter = pImpl->m_pLinkedDlg->GetFilter();
sOptions = pImpl->m_pLinkedDlg->GetOptions();
sSource = pImpl->m_pLinkedDlg->GetSource();
nRefreshDelaySeconds = pImpl->m_pLinkedDlg->GetRefreshDelaySeconds();
if ( !sFile.isEmpty() )
pImpl->m_pRequest->AppendItem( SfxStringItem( SID_FILE_NAME, sFile ) );
if ( !sFilter.isEmpty() )
pImpl->m_pRequest->AppendItem( SfxStringItem( SID_FILTER_NAME, sFilter ) );
if ( !sOptions.isEmpty() )
pImpl->m_pRequest->AppendItem( SfxStringItem( SID_FILE_FILTEROPTIONS, sOptions ) );
if ( !sSource.isEmpty() )
pImpl->m_pRequest->AppendItem( SfxStringItem( FN_PARAM_1, sSource ) );
if ( nRefreshDelaySeconds )
pImpl->m_pRequest->AppendItem( SfxUInt32Item( FN_PARAM_2, nRefreshDelaySeconds ) );
}
ExecuteExternalSource( sFile, sFilter, sOptions, sSource, nRefreshDelaySeconds, *(pImpl->m_pRequest) );
}
}
break;
case SID_AUTO_SUM:
{
const SfxItemSet *pArgs = rReq.GetArgs();
const OUString sFunction = pArgs ?
static_cast<const SfxStringItem&>( pArgs->Get( SID_AUTO_SUM ) ).GetValue()
: u""_ustr;
OpCode eFunction = ocSum;
if (sFunction == "average")
eFunction = ocAverage;
else if (sFunction == "count")
eFunction = ocCount;
else if (sFunction == "min")
eFunction = ocMin;
if (sFunction == "max")
eFunction = ocMax;
bool bSubTotal = false;
bool bRangeFinder = false;
const OUString aFormula = pTabViewShell->DoAutoSum( bRangeFinder, bSubTotal , eFunction );
if ( !aFormula.isEmpty() )
{
const sal_Int32 nPar = aFormula.indexOf( '(' );
const sal_Int32 nLen = aFormula.getLength();
ScInputHandler* pHdl = pScMod->GetInputHdl( pTabViewShell );
if ( pHdl && nPar != -1 )
{
if ( !pScMod->IsEditMode() )
{
pScMod->SetInputMode( SC_INPUT_TABLE );
}
EditView *pEditView=pHdl->GetActiveView();
if ( pEditView )
{
ESelection aTextSel = pEditView->GetSelection();
aTextSel.nStartPos = 0;
aTextSel.nEndPos = EE_TEXTPOS_ALL;
pHdl->DataChanging();
pEditView->SetSelection(aTextSel);
pEditView->InsertText(aFormula);
pEditView->SetSelection( bRangeFinder ? ESelection( 0, nPar + ( bSubTotal ? 3 : 1 ), 0, nLen - 1 ) : ESelection( 0, nLen - 1, 0, nLen - 1 ) );
pHdl->DataChanged();
if ( bRangeFinder )
{
pHdl->InitRangeFinder( aFormula );
}
}
}
}
}
break;
case SID_SELECT_UNPROTECTED_CELLS:
{
ScViewData& rData = GetViewData();
SCTAB aTab = rData.GetTabNo();
ScMarkData& rMark = rData.GetMarkData();
ScDocument& rDoc = rData.GetDocument();
ScRangeList rRangeList;
rDoc.GetUnprotectedCells(rRangeList, aTab);
rMark.MarkFromRangeList(rRangeList, true);
pTabViewShell->SetMarkData(rMark);
}
break;
case SID_SELECT_VISIBLE_ROWS:
{
ScViewData& rData = GetViewData();
ScMarkData& rMark = rData.GetMarkData();
ScDocument& rDoc = rData.GetDocument();
rMark.MarkToMulti();
const ScRange& aMultiArea = rMark.GetMultiMarkArea();
SCCOL nStartCol = aMultiArea.aStart.Col();
SCROW nStartRow = aMultiArea.aStart.Row();
SCCOL nEndCol = aMultiArea.aEnd.Col();
SCROW nEndRow = aMultiArea.aEnd.Row();
bool bChanged = false;
for (const SCTAB& nTab : rMark)
{
for (SCROW nRow = nStartRow; nRow <= nEndRow; ++nRow)
{
SCROW nLastRow = nRow;
if (rDoc.RowHidden(nRow, nTab, nullptr, &nLastRow))
{
rMark.SetMultiMarkArea(
ScRange(nStartCol, nRow, nTab, nEndCol, nLastRow, nTab), false);
bChanged = true;
nRow = nLastRow;
}
}
}
if (bChanged && !rMark.HasAnyMultiMarks())
rMark.ResetMark();
rMark.MarkToSimple();
pTabViewShell->SelectionChanged();
}
break;
case SID_SELECT_VISIBLE_COLUMNS:
{
ScViewData& rData = GetViewData();
ScMarkData& rMark = rData.GetMarkData();
ScDocument& rDoc = rData.GetDocument();
rMark.MarkToMulti();
const ScRange& aMultiArea = rMark.GetMultiMarkArea();
SCCOL nStartCol = aMultiArea.aStart.Col();
SCROW nStartRow = aMultiArea.aStart.Row();
SCCOL nEndCol = aMultiArea.aEnd.Col();
SCROW nEndRow = aMultiArea.aEnd.Row();
bool bChanged = false;
for (const SCTAB& nTab : rMark)
{
for (SCCOL nCol = nStartCol; nCol <= nEndCol; ++nCol)
{
SCCOL nLastCol = nCol;
if (rDoc.ColHidden(nCol, nTab, nullptr, &nLastCol))
{
rMark.SetMultiMarkArea(
ScRange(nCol, nStartRow, nTab, nLastCol, nEndRow, nTab), false);
bChanged = true;
nCol = nLastCol;
}
}
}
if (bChanged && !rMark.HasAnyMultiMarks())
rMark.ResetMark();
rMark.MarkToSimple();
pTabViewShell->SelectionChanged();
}
break;
case SID_CURRENT_FORMULA_RANGE:
{
const SfxInt32Item* param1 = rReq.GetArg<SfxInt32Item>(FN_PARAM_1);
SCCOL colStart = param1 ? param1->GetValue() : 0;
const SfxInt32Item* param2 = rReq.GetArg<SfxInt32Item>(FN_PARAM_2);
SCROW rowStart = param2 ? param2->GetValue() : 0;
const SfxInt32Item* param3 = rReq.GetArg<SfxInt32Item>(FN_PARAM_3);
SCCOL colEnd = param3 ? param3->GetValue() : 0;
const SfxInt32Item* param4 = rReq.GetArg<SfxInt32Item>(FN_PARAM_4);
SCROW rowEnd = param4 ? param4->GetValue() : 0;
const SfxInt32Item* param5 = rReq.GetArg<SfxInt32Item>(FN_PARAM_5);
SCROW table = param5 ? param5->GetValue() : 0;
ScInputHandler* pInputHdl = SC_MOD()->GetInputHdl();
if (param3 && param4 && pInputHdl)
{
ScViewData& rData = pTabViewShell->GetViewData();
ScTabView* pTabView = rData.GetView();
if (param1 && param2)
rData.SetRefStart(colStart, rowStart, table);
pTabView->UpdateRef( colEnd, rowEnd, table ); // setup the end & refresh formula
ScRange aRef(
colStart, rowStart, rData.GetRefStartZ(),
colEnd, rowEnd, rData.GetRefEndZ() );
SC_MOD()->SetReference( aRef, rData.GetDocument(), &rData.GetMarkData() );
pInputHdl->UpdateLokReferenceMarks();
}
}
break;
case SID_COPY_HYPERLINK_LOCATION:
{
ScViewData& rData = GetViewData();
ScGridWindow* pWindow = rData.GetActiveWin();
const SfxInt32Item* pPosX = rReq.GetArg<SfxInt32Item>(FN_PARAM_1);
const SfxInt32Item* pPosY = rReq.GetArg<SfxInt32Item>(FN_PARAM_2);
if (pWindow && pPosX && pPosY)
{
const Point aPoint(pPosX->GetValue() * rData.GetPPTX(),
pPosY->GetValue() * rData.GetPPTY());
OUString aUrl;
if (pWindow->GetEditUrl(aPoint, nullptr, &aUrl))
{
uno::Reference<datatransfer::clipboard::XClipboard> xClipboard
= pWindow->GetClipboard();
vcl::unohelper::TextDataObject::CopyStringTo(aUrl, xClipboard,
rData.GetViewShell());
rReq.Done();
}
}
}
break;
case SID_EDIT_HYPERLINK:
case SID_REMOVE_HYPERLINK:
{
ScViewData& rData = GetViewData();
ScGridWindow* pWindow = rData.GetActiveWin();
const SfxInt32Item* pPosX = rReq.GetArg<SfxInt32Item>(FN_PARAM_1);
const SfxInt32Item* pPosY = rReq.GetArg<SfxInt32Item>(FN_PARAM_2);
if (pWindow && pPosX && pPosY)
{
const Point aPoint(pPosX->GetValue() * rData.GetPPTX(),
pPosY->GetValue() * rData.GetPPTY());
SCCOL nPosX;
SCROW nPosY;
ScSplitPos eWhich = rData.GetActivePart();
rData.GetPosFromPixel(aPoint.X(), aPoint.Y(), eWhich, nPosX, nPosY);
if (pWindow->GetEditUrl(aPoint, nullptr, nullptr, nullptr, &nPosX))
{
pTabViewShell->SetCursor(nPosX, nPosY);
pTabViewShell->UpdateInputHandler();
pScMod->SetInputMode(SC_INPUT_TABLE);
ScInputHandler* pHdl = pScMod->GetInputHdl(pTabViewShell);
if (rData.HasEditView(eWhich) && pHdl)
{
// Set text cursor where clicked
EditView* pEditView = rData.GetEditView(eWhich);
MouseEvent aEditEvt(aPoint, 1, MouseEventModifiers::SYNTHETIC,
MOUSE_LEFT, 0);
pEditView->MouseButtonDown(aEditEvt);
pEditView->MouseButtonUp(aEditEvt);
if (nSlot == SID_REMOVE_HYPERLINK)
{
pHdl->DataChanging();
URLFieldHelper::RemoveURLField(*pEditView);
pHdl->DataChanged();
pHdl->EnterHandler();
}
else
{
pEditView->SelectFieldAtCursor();
rData.GetViewShell()->GetViewFrame().GetDispatcher()->Execute(
SID_HYPERLINK_DIALOG);
}
rReq.Done();
}
}
}
}
break;
default:
OSL_FAIL("incorrect slot in ExecuteEdit");
break;
}
}
void ScCellShell::ExecuteTrans( SfxRequest& rReq )
{
TransliterationFlags nType = ScViewUtil::GetTransliterationType( rReq.GetSlot() );
if ( nType != TransliterationFlags::NONE )
{
GetViewData().GetView()->TransliterateText( nType );
rReq.Done();
}
}
void ScCellShell::ExecuteRotateTrans( const SfxRequest& rReq )
{
if( rReq.GetSlot() == SID_TRANSLITERATE_ROTATE_CASE )
GetViewData().GetView()->TransliterateText( m_aRotateCase.getNextMode() );
}
void ScCellShell::ExecuteExternalSource(
const OUString& _rFile, const OUString& _rFilter, const OUString& _rOptions,
const OUString& _rSource, sal_Int32 _nRefreshDelaySeconds, SfxRequest& _rRequest )
{
if ( !_rFile.isEmpty() && !_rSource.isEmpty() ) // filter may be empty
{
ScRange aLinkRange;
bool bMove = false;
ScViewData& rData = GetViewData();
ScMarkData& rMark = rData.GetMarkData();
rMark.MarkToSimple();
if ( rMark.IsMarked() )
{
aLinkRange = rMark.GetMarkArea();
bMove = true; // insert/delete cells to fit range
}
else
aLinkRange = ScRange( rData.GetCurX(), rData.GetCurY(), rData.GetTabNo() );
rData.GetDocFunc().InsertAreaLink( _rFile, _rFilter, _rOptions, _rSource,
aLinkRange, _nRefreshDelaySeconds, bMove, false );
_rRequest.Done();
}
else
_rRequest.Ignore();
}
namespace {
bool isDPSourceValid(const ScDPObject& rDPObj)
{
if (rDPObj.IsImportData())
{
// If the data type is database, check if the database is still valid.
const ScImportSourceDesc* pDesc = rDPObj.GetImportSourceDesc();
if (!pDesc)
return false;
const ScDPSaveData* pSaveData = rDPObj.GetSaveData();
const ScDPDimensionSaveData* pDimData = nullptr;
if (pSaveData)
pDimData = pSaveData->GetExistingDimensionData();
const ScDPCache* pCache = pDesc->CreateCache(pDimData);
if (!pCache)
// cache creation failed, probably due to invalid connection.
return false;
}
return true;
}
void RunPivotLayoutDialog(ScModule* pScMod,
ScTabViewShell* pTabViewShell,
std::unique_ptr<ScDPObject>& pNewDPObject)
{
bool bHadNewDPObject = pNewDPObject != nullptr;
pTabViewShell->SetDialogDPObject( std::move(pNewDPObject) );
if ( bHadNewDPObject )
{
// start layout dialog
sal_uInt16 nId = ScPivotLayoutWrapper::GetChildWindowId();
SfxViewFrame& rViewFrm = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrm.GetChildWindow( nId );
pScMod->SetRefDialog( nId, pWnd == nullptr );
}
}
void SetupRangeForPivotTableDialog(const ScRange& rRange,
ScAddress& rDestPos,
ScDocument* pDoc,
TranslateId& rSrcErrorId,
std::unique_ptr<ScDPObject>& pNewDPObject)
{
ScSheetSourceDesc aShtDesc(pDoc);
aShtDesc.SetSourceRange(rRange);
rSrcErrorId = aShtDesc.CheckSourceRange();
if (!rSrcErrorId)
{
pNewDPObject.reset(new ScDPObject(pDoc));
pNewDPObject->SetSheetDesc( aShtDesc );
}
// output below source data
if ( rRange.aEnd.Row()+2 <= pDoc->MaxRow() - 4 )
rDestPos = ScAddress( rRange.aStart.Col(),
rRange.aEnd.Row()+2,
rRange.aStart.Tab() );
}
void ErrorOrRunPivotLayoutDialog(TranslateId pSrcErrorId,
const ScAddress& rDestPos,
ScModule* pScMod,
ScTabViewShell* pTabViewShell,
std::unique_ptr<ScDPObject>& pNewDPObject)
{
if (pSrcErrorId)
{
// Error occurred during data creation. Launch an error and bail out.
std::shared_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(pTabViewShell->GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
ScResId(pSrcErrorId)));
xInfoBox->runAsync(xInfoBox, [] (int) {});
return;
}
if ( pNewDPObject )
pNewDPObject->SetOutRange( ScRange(rDestPos) );
RunPivotLayoutDialog(pScMod, pTabViewShell, pNewDPObject);
}
}
void ScCellShell::ExecuteDataPilotDialog()
{
ScModule* pScMod = SC_MOD();
ScTabViewShell* pTabViewShell = GetViewData().GetViewShell();
ScViewData& rData = GetViewData();
ScDocument& rDoc = rData.GetDocument();
// ScPivot is no longer used...
ScDPObject* pDPObj = rDoc.GetDPAtCursor(
rData.GetCurX(), rData.GetCurY(),
rData.GetTabNo() );
if ( pDPObj ) // on an existing table?
{
std::unique_ptr<ScDPObject> pNewDPObject;
if (isDPSourceValid(*pDPObj))
pNewDPObject.reset(new ScDPObject(*pDPObj));
RunPivotLayoutDialog(pScMod, pTabViewShell, pNewDPObject);
}
else // create new table
{
// select database range or data
pTabViewShell->GetDBData( true, SC_DB_OLD );
ScMarkData& rMark = GetViewData().GetMarkData();
if ( !rMark.IsMarked() && !rMark.IsMultiMarked() )
pTabViewShell->MarkDataArea( false );
// output to cursor position for non-sheet data
ScAddress aDestPos( rData.GetCurX(), rData.GetCurY(),
rData.GetTabNo() );
// first select type of source data
bool bEnableExt = ScDPObject::HasRegisteredSources();
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
VclPtr<AbstractScDataPilotSourceTypeDlg> pTypeDlg(
pFact->CreateScDataPilotSourceTypeDlg(
pTabViewShell->GetFrameWeld(), bEnableExt));
// Populate named ranges (if any).
ScRangeName* pRangeName = rDoc.GetRangeName();
if (pRangeName)
{
ScRangeName::const_iterator itr = pRangeName->begin(), itrEnd = pRangeName->end();
for (; itr != itrEnd; ++itr)
pTypeDlg->AppendNamedRange(itr->second->GetName());
}
pTypeDlg->StartExecuteAsync([this, pTypeDlg, pTabViewShell,
pScMod, pFact, &rDoc, &rMark, aDestPos](int nResult) mutable {
if (nResult == RET_OK )
{
if ( pTypeDlg->IsExternal() )
{
std::vector<OUString> aSources = ScDPObject::GetRegisteredSources();
VclPtr<AbstractScDataPilotServiceDlg> pServDlg(
pFact->CreateScDataPilotServiceDlg(
pTabViewShell->GetFrameWeld(), aSources));
pServDlg->StartExecuteAsync([pServDlg, pScMod, pTabViewShell,
aDestPos, &rDoc](int nResult2) mutable {
if ( nResult2 == RET_OK )
{
ScDPServiceDesc aServDesc(
pServDlg->GetServiceName(),
pServDlg->GetParSource(),
pServDlg->GetParName(),
pServDlg->GetParUser(),
pServDlg->GetParPass() );
std::unique_ptr<ScDPObject> pNewDPObject(new ScDPObject(&rDoc));
pNewDPObject->SetServiceData( aServDesc );
pNewDPObject->SetOutRange(ScRange(aDestPos));
RunPivotLayoutDialog(pScMod, pTabViewShell, pNewDPObject);
}
pServDlg->disposeOnce();
});
}
else if ( pTypeDlg->IsDatabase() )
{
assert(pFact && "ScAbstractFactory create fail!");
VclPtr<AbstractScDataPilotDatabaseDlg> pDataDlg(
pFact->CreateScDataPilotDatabaseDlg(pTabViewShell->GetFrameWeld()));
assert(pDataDlg && "Dialog create fail!");
pDataDlg->StartExecuteAsync([pDataDlg, pScMod, pTabViewShell,
aDestPos, &rDoc](int nResult2) mutable {
if ( nResult2 == RET_OK )
{
ScImportSourceDesc aImpDesc(&rDoc);
pDataDlg->GetValues( aImpDesc );
std::unique_ptr<ScDPObject> pNewDPObject(new ScDPObject(&rDoc));
pNewDPObject->SetImportDesc( aImpDesc );
pNewDPObject->SetOutRange(ScRange(aDestPos));
RunPivotLayoutDialog(pScMod, pTabViewShell, pNewDPObject);
}
pDataDlg->disposeOnce();
});
}
else
{
TranslateId pSrcErrorId;
if (pTypeDlg->IsNamedRange())
{
std::unique_ptr<ScDPObject> pNewDPObject;
OUString aName = pTypeDlg->GetSelectedNamedRange();
ScSheetSourceDesc aShtDesc(&rDoc);
aShtDesc.SetRangeName(aName);
pSrcErrorId = aShtDesc.CheckSourceRange();
if (!pSrcErrorId)
{
pNewDPObject.reset(new ScDPObject(&rDoc));
pNewDPObject->SetSheetDesc(aShtDesc);
}
ErrorOrRunPivotLayoutDialog(pSrcErrorId, aDestPos, pScMod, pTabViewShell, pNewDPObject);
}
else // selection
{
//! use database ranges (select before type dialog?)
ScRange aRange;
ScMarkType eType = GetViewData().GetSimpleArea(aRange);
if ( (eType & SC_MARK_SIMPLE) == SC_MARK_SIMPLE )
{
ScDocument* pDoc = &rDoc;
// Shrink the range to the data area.
SCCOL nStartCol = aRange.aStart.Col(), nEndCol = aRange.aEnd.Col();
SCROW nStartRow = aRange.aStart.Row(), nEndRow = aRange.aEnd.Row();
if (rDoc.ShrinkToDataArea(aRange.aStart.Tab(), nStartCol, nStartRow, nEndCol, nEndRow))
{
aRange.aStart.SetCol(nStartCol);
aRange.aStart.SetRow(nStartRow);
aRange.aEnd.SetCol(nEndCol);
aRange.aEnd.SetRow(nEndRow);
rMark.SetMarkArea(aRange);
pTabViewShell->MarkRange(aRange);
}
if ( rDoc.HasSubTotalCells( aRange ) )
{
// confirm selection if it contains SubTotal cells
std::shared_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(pTabViewShell->GetFrameWeld(),
VclMessageType::Question, VclButtonsType::YesNo,
ScResId(STR_DATAPILOT_SUBTOTAL)));
xQueryBox->set_default_response(RET_YES);
xQueryBox->runAsync(xQueryBox, [aRange, pDoc, pTypeDlg, aDestPos,
pScMod, pTabViewShell, pSrcErrorId] (int nResult2) mutable {
if (nResult2 == RET_NO)
return;
std::unique_ptr<ScDPObject> pNewDPObject;
SetupRangeForPivotTableDialog(aRange, aDestPos, pDoc, pSrcErrorId, pNewDPObject);
ErrorOrRunPivotLayoutDialog(pSrcErrorId, aDestPos, pScMod, pTabViewShell, pNewDPObject);
});
pTypeDlg->disposeOnce();
return;
}
std::unique_ptr<ScDPObject> pNewDPObject;
SetupRangeForPivotTableDialog(aRange, aDestPos, pDoc, pSrcErrorId, pNewDPObject);
ErrorOrRunPivotLayoutDialog(pSrcErrorId, aDestPos, pScMod, pTabViewShell, pNewDPObject);
}
}
}
}
pTypeDlg->disposeOnce();
});
}
}
void ScCellShell::ExecuteXMLSourceDialog()
{
ScTabViewShell* pTabViewShell = GetViewData().GetViewShell();
if (!pTabViewShell)
return;
ScModule* pScMod = SC_MOD();
sal_uInt16 nId = ScXMLSourceDlgWrapper::GetChildWindowId();
SfxViewFrame& rViewFrame = pTabViewShell->GetViewFrame();
SfxChildWindow* pWnd = rViewFrame.GetChildWindow(nId);
pScMod->SetRefDialog(nId, pWnd == nullptr);
}
void ScCellShell::ExecuteSubtotals(SfxRequest& rReq)
{
ScTabViewShell* pTabViewShell = GetViewData().GetViewShell();
const SfxItemSet* pArgs = rReq.GetArgs();
if ( pArgs )
{
pTabViewShell->DoSubTotals( pArgs->Get( SCITEM_SUBTDATA ).
GetSubTotalData() );
rReq.Done();
return;
}
ScopedVclPtr<SfxAbstractTabDialog> pDlg;
ScSubTotalParam aSubTotalParam;
SfxItemSetFixed<SCITEM_SUBTDATA, SCITEM_SUBTDATA> aArgSet( GetPool() );
bool bAnonymous;
// Only get existing named database range.
ScDBData* pDBData = pTabViewShell->GetDBData(true, SC_DB_OLD);
if (pDBData)
bAnonymous = false;
else
{
// No existing DB data at this position. Create an
// anonymous DB.
bAnonymous = true;
pDBData = pTabViewShell->GetAnonymousDBData();
ScRange aDataRange;
pDBData->GetArea(aDataRange);
pTabViewShell->MarkRange(aDataRange, false);
}
pDBData->GetSubTotalParam( aSubTotalParam );
ScDocument& rDoc = GetViewData().GetDocument();
SCTAB nTab = GetViewData().GetTabNo();
if (!rDoc.GetTotalsRowBelow(nTab))
aSubTotalParam.bSummaryBelow = false;
aSubTotalParam.bRemoveOnly = false;
if (bAnonymous)
{
// Preset sort formatting along with values and also create formula
// cells with "needs formatting". Subtotals on data of different types
// doesn't make much sense anyway.
aSubTotalParam.bIncludePattern = true;
}
aArgSet.Put( ScSubTotalItem( SCITEM_SUBTDATA, &GetViewData(), &aSubTotalParam ) );
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
pDlg.disposeAndReset(pFact->CreateScSubTotalDlg(pTabViewShell->GetFrameWeld(), aArgSet));
pDlg->SetCurPageId(u"1stgroup"_ustr);
short bResult = pDlg->Execute();
if ( (bResult == RET_OK) || (bResult == SCRET_REMOVE) )
{
const SfxItemSet* pOutSet = nullptr;
if ( bResult == RET_OK )
{
pOutSet = pDlg->GetOutputItemSet();
aSubTotalParam =
pOutSet->Get( SCITEM_SUBTDATA ).GetSubTotalData();
}
else // if (bResult == SCRET_REMOVE)
{
pOutSet = &aArgSet;
aSubTotalParam.bRemoveOnly = true;
aSubTotalParam.bReplace = true;
aArgSet.Put( ScSubTotalItem( SCITEM_SUBTDATA,
&GetViewData(),
&aSubTotalParam ) );
}
pTabViewShell->DoSubTotals( aSubTotalParam );
rReq.Done( *pOutSet );
}
else
GetViewData().GetDocShell()->CancelAutoDBRange();
}
void ScCellShell::ExecuteFillSingleEdit()
{
ScAddress aCurPos = GetViewData().GetCurPos();
OUString aInit;
if (aCurPos.Row() > 0)
{
// Get the initial text value from the above cell.
ScDocument& rDoc = GetViewData().GetDocument();
ScAddress aPrevPos = aCurPos;
aPrevPos.IncRow(-1);
ScRefCellValue aCell(rDoc, aPrevPos);
if (aCell.getType() == CELLTYPE_FORMULA)
{
aInit = "=";
const ScTokenArray* pCode = aCell.getFormula()->GetCode();
sc::TokenStringContext aCxt(rDoc, rDoc.GetGrammar());
aInit += pCode->CreateString(aCxt, aCurPos);
}
else
aInit = aCell.getString(&rDoc);
}
SC_MOD()->SetInputMode(SC_INPUT_TABLE, &aInit);
}
CellShell_Impl::CellShell_Impl() :
m_pRequest( nullptr ) {}
CellShell_Impl::~CellShell_Impl()
{
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V547 Expression 'bToSimplified' is always true.
↑ V547 Expression 'bToSimplified' is always true.
↑ V547 Expression 'bUseVariants' is always true.
↑ V547 Expression '!bCommonTerms' is always false.
↑ V1023 A pointer without owner is added to the 'pIconSetFormatData->m_Entries' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'pIconSetFormatData->m_Entries' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'pIconSetFormatData->m_Entries' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'pIconSetFormatData->m_Entries' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'pIconSetFormatData->m_Entries' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1048 The 'eFillCmd' variable was assigned the same value.