/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <sfx2/request.hxx>
#include <osl/diagnose.h>
#include <cellsh.hxx>
#include <tabvwsh.hxx>
#include <global.hxx>
#include <scmod.hxx>
#include <inputhdl.hxx>
#include <inputwin.hxx>
#include <document.hxx>
#include <officecfg/Office/Calc.hxx>
#include <sc.hrc>
void ScCellShell::ExecuteCursor( SfxRequest& rReq )
{
ScViewData& rData = GetViewData();
ScTabViewShell* pTabViewShell = rData.GetViewShell();
const SfxItemSet* pReqArgs = rReq.GetArgs();
sal_uInt16 nSlotId = rReq.GetSlot();
SCCOLROW nRepeat = 1;
bool bSel = false;
bool bKeep = false;
if ( pReqArgs != nullptr )
{
const SfxPoolItem* pItem;
if (pReqArgs->HasItem(FN_PARAM_1, &pItem))
nRepeat = static_cast<SCCOLROW>(static_cast<const SfxInt16Item*>(pItem)->GetValue());
if (pReqArgs->HasItem(FN_PARAM_2, &pItem))
bSel = static_cast<const SfxBoolItem*>(pItem)->GetValue();
}
else
{
// evaluate locked selection mode
sal_uInt16 nLocked = pTabViewShell->GetLockedModifiers();
if ( nLocked & KEY_SHIFT )
bSel = true; // EXT
else if ( nLocked & KEY_MOD1 )
{
// ADD mode: keep the selection, start a new block when marking with shift again
bKeep = true;
}
}
if (bSel)
{
switch (nSlotId)
{
case SID_CURSORDOWN:
rReq.SetSlot(SID_CURSORDOWN_SEL);
break;
case SID_CURSORUP:
rReq.SetSlot(SID_CURSORUP_SEL);
break;
case SID_CURSORRIGHT:
rReq.SetSlot(SID_CURSORRIGHT_SEL);
break;
case SID_CURSORLEFT:
rReq.SetSlot(SID_CURSORLEFT_SEL);
break;
case SID_CURSORPAGEDOWN:
rReq.SetSlot(SID_CURSORPAGEDOWN_SEL);
break;
case SID_CURSORPAGEUP:
rReq.SetSlot(SID_CURSORPAGEUP_SEL);
break;
case SID_CURSORBLKDOWN:
rReq.SetSlot(SID_CURSORBLKDOWN_SEL);
break;
case SID_CURSORBLKUP:
rReq.SetSlot(SID_CURSORBLKUP_SEL);
break;
case SID_CURSORBLKRIGHT:
rReq.SetSlot(SID_CURSORBLKRIGHT_SEL);
break;
case SID_CURSORBLKLEFT:
rReq.SetSlot(SID_CURSORBLKLEFT_SEL);
break;
default:
;
}
ExecuteCursorSel(rReq);
return;
}
SCCOLROW nRTLSign = 1;
if ( rData.GetDocument().IsLayoutRTL( rData.GetTabNo() ) )
{
//! evaluate cursor movement option?
nRTLSign = -1;
}
// once extra, so that the cursor will not be painted too often with ExecuteInputDirect:
pTabViewShell->HideAllCursors();
// #i123629#
if( pTabViewShell->GetCurObjectSelectionType() == OST_Editing )
pTabViewShell->SetForceFocusOnCurCell(true);
else
pTabViewShell->SetForceFocusOnCurCell(false);
// If ScrollLock key is active, cell cursor stays on the current cell while
// scrolling the grid.
bool bScrollLock = false;
// tdf#112876 - allow to disable for special keyboards
if (officecfg::Office::Calc::Input::UseScrollLock::get())
{
KeyIndicatorState eState = pFrameWin->GetIndicatorState();
if (eState & KeyIndicatorState::SCROLLLOCK)
bScrollLock = true;
}
//OS: once for all should do, however!
pTabViewShell->ExecuteInputDirect();
switch ( nSlotId )
{
case SID_CURSORDOWN:
if (bScrollLock)
pTabViewShell->ScrollY( nRepeat, SC_SPLIT_BOTTOM );
else
pTabViewShell->MoveCursorRel( 0, nRepeat, SC_FOLLOW_LINE, bSel, bKeep );
break;
case SID_CURSORBLKDOWN:
pTabViewShell->MoveCursorArea( 0, nRepeat, SC_FOLLOW_JUMP, bSel, bKeep, !rReq.IsAPI() );
break;
case SID_CURSORUP:
if (bScrollLock)
pTabViewShell->ScrollY( -nRepeat, SC_SPLIT_BOTTOM);
else
pTabViewShell->MoveCursorRel( 0, -nRepeat, SC_FOLLOW_LINE, bSel, bKeep );
break;
case SID_CURSORBLKUP:
pTabViewShell->MoveCursorArea( 0, -nRepeat, SC_FOLLOW_JUMP, bSel, bKeep, !rReq.IsAPI() );
break;
case SID_CURSORLEFT:
if (bScrollLock)
pTabViewShell->ScrollX( static_cast<SCCOL>(-nRepeat * nRTLSign), SC_SPLIT_LEFT);
else
pTabViewShell->MoveCursorRel( static_cast<SCCOL>(-nRepeat * nRTLSign), 0, SC_FOLLOW_LINE, bSel, bKeep );
break;
case SID_CURSORBLKLEFT:
pTabViewShell->MoveCursorArea( static_cast<SCCOL>(-nRepeat * nRTLSign), 0, SC_FOLLOW_JUMP, bSel, bKeep, !rReq.IsAPI() );
break;
case SID_CURSORRIGHT:
if (bScrollLock)
pTabViewShell->ScrollX( static_cast<SCCOL>(nRepeat * nRTLSign), SC_SPLIT_LEFT);
else
pTabViewShell->MoveCursorRel( static_cast<SCCOL>(nRepeat * nRTLSign), 0, SC_FOLLOW_LINE, bSel, bKeep );
break;
case SID_CURSORBLKRIGHT:
pTabViewShell->MoveCursorArea( static_cast<SCCOL>(nRepeat * nRTLSign), 0, SC_FOLLOW_JUMP, bSel, bKeep, !rReq.IsAPI() );
break;
case SID_CURSORPAGEDOWN:
if (bScrollLock)
{
SCCOL nPageX;
SCROW nPageY;
pTabViewShell->GetPageMoveEndPosition( 0, nRepeat, nPageX, nPageY);
pTabViewShell->ScrollY( nPageY, SC_SPLIT_BOTTOM);
}
else
pTabViewShell->MoveCursorPage( 0, nRepeat, SC_FOLLOW_FIX, bSel, bKeep );
break;
case SID_CURSORPAGEUP:
if (bScrollLock)
{
SCCOL nPageX;
SCROW nPageY;
pTabViewShell->GetPageMoveEndPosition( 0, nRepeat, nPageX, nPageY);
pTabViewShell->ScrollY( -nPageY, SC_SPLIT_BOTTOM);
}
else
pTabViewShell->MoveCursorPage( 0, -nRepeat, SC_FOLLOW_FIX, bSel, bKeep );
break;
case SID_CURSORPAGERIGHT_: //XXX !!!
if (bScrollLock)
{
SCCOL nPageX;
SCROW nPageY;
pTabViewShell->GetPageMoveEndPosition( static_cast<SCCOL>(nRepeat), 0, nPageX, nPageY);
pTabViewShell->ScrollX( nPageX, SC_SPLIT_LEFT);
}
else
pTabViewShell->MoveCursorPage( static_cast<SCCOL>(nRepeat), 0, SC_FOLLOW_FIX, bSel, bKeep );
break;
case SID_CURSORPAGELEFT_: //XXX !!!
if (bScrollLock)
{
SCCOL nPageX;
SCROW nPageY;
pTabViewShell->GetPageMoveEndPosition( static_cast<SCCOL>(nRepeat), 0, nPageX, nPageY);
pTabViewShell->ScrollX( -nPageX, SC_SPLIT_LEFT);
}
else
pTabViewShell->MoveCursorPage( static_cast<SCCOL>(-nRepeat), 0, SC_FOLLOW_FIX, bSel, bKeep );
break;
default:
OSL_FAIL("Unknown message in ViewShell (Cursor)");
return;
}
pTabViewShell->ShowAllCursors();
rReq.AppendItem( SfxInt16Item(FN_PARAM_1, static_cast<sal_Int16>(nRepeat)) );
rReq.AppendItem( SfxBoolItem(FN_PARAM_2, bSel) );
rReq.Done();
}
void ScCellShell::GetStateCursor( SAL_UNUSED_PARAMETER SfxItemSet& /* rSet */ )
{
}
void ScCellShell::ExecuteCursorSel( SfxRequest& rReq )
{
sal_uInt16 nSlotId = rReq.GetSlot();
ScTabViewShell* pViewShell = GetViewData().GetViewShell();
ScInputHandler* pInputHdl = pViewShell->GetInputHandler();
pViewShell->HideAllCursors();
if (pInputHdl && pInputHdl->IsInputMode())
{
// the current cell is in edit mode. Commit the text before moving on.
pViewShell->ExecuteInputDirect();
}
SCCOLROW nRepeat = 1;
const SfxItemSet* pReqArgs = rReq.GetArgs();
// get repetition
if ( pReqArgs != nullptr )
{
const SfxPoolItem* pItem;
if (pReqArgs->HasItem(FN_PARAM_1, &pItem))
nRepeat = static_cast<SCCOLROW>(static_cast<const SfxInt16Item*>(pItem)->GetValue());
}
SCROW nMovY = nRepeat;
// Horizontal direction depends on whether or not the UI language is RTL.
SCCOL nMovX = nRepeat;
if (GetViewData().GetDocument().IsLayoutRTL(GetViewData().GetTabNo()))
{
// mirror horizontal movement for right-to-left mode.
nMovX = -nRepeat;
}
switch (nSlotId)
{
case SID_CURSORDOWN_SEL:
pViewShell->ExpandBlock(0, nMovY, SC_FOLLOW_LINE);
break;
case SID_CURSORUP_SEL:
pViewShell->ExpandBlock(0, -nMovY, SC_FOLLOW_LINE);
break;
case SID_CURSORRIGHT_SEL:
pViewShell->ExpandBlock(nMovX, 0, SC_FOLLOW_LINE);
break;
case SID_CURSORLEFT_SEL:
pViewShell->ExpandBlock(-nMovX, 0, SC_FOLLOW_LINE);
break;
case SID_CURSORPAGEUP_SEL:
pViewShell->ExpandBlockPage(0, -nMovY);
break;
case SID_CURSORPAGEDOWN_SEL:
pViewShell->ExpandBlockPage(0, nMovY);
break;
case SID_CURSORPAGERIGHT_SEL:
pViewShell->ExpandBlockPage(nMovX, 0);
break;
case SID_CURSORPAGELEFT_SEL:
pViewShell->ExpandBlockPage(-nMovX, 0);
break;
case SID_CURSORBLKDOWN_SEL:
pViewShell->ExpandBlockArea(0, nMovY);
break;
case SID_CURSORBLKUP_SEL:
pViewShell->ExpandBlockArea(0, -nMovY);
break;
case SID_CURSORBLKRIGHT_SEL:
pViewShell->ExpandBlockArea(nMovX , 0);
break;
case SID_CURSORBLKLEFT_SEL:
pViewShell->ExpandBlockArea(-nMovX, 0);
break;
default:
;
}
pViewShell->ShowAllCursors();
rReq.AppendItem( SfxInt16Item(FN_PARAM_1,static_cast<sal_Int16>(nRepeat)) );
rReq.Done();
}
void ScCellShell::ExecuteMove( SfxRequest& rReq )
{
ScTabViewShell* pTabViewShell = GetViewData().GetViewShell();
sal_uInt16 nSlotId = rReq.GetSlot();
const SfxItemSet* pReqArgs = rReq.GetArgs();
if(nSlotId != SID_CURSORTOPOFSCREEN && nSlotId != SID_CURSORENDOFSCREEN)
pTabViewShell->ExecuteInputDirect();
switch ( nSlotId )
{
case SID_NEXT_TABLE:
case SID_NEXT_TABLE_SEL:
pTabViewShell->SelectNextTab( 1, (nSlotId == SID_NEXT_TABLE_SEL) );
break;
case SID_PREV_TABLE:
case SID_PREV_TABLE_SEL:
pTabViewShell->SelectNextTab( -1, (nSlotId == SID_PREV_TABLE_SEL) );
break;
// cursor movements in range do not originate from Basic,
// because the ScSbxRange-object changes the marking at input
case SID_NEXT_UNPROTECT:
pTabViewShell->FindNextUnprot( false, !rReq.IsAPI() );
break;
case SID_PREV_UNPROTECT:
pTabViewShell->FindNextUnprot( true, !rReq.IsAPI() );
break;
case SID_CURSORENTERUP:
if (rReq.IsAPI())
pTabViewShell->MoveCursorRel( 0, -1, SC_FOLLOW_LINE, false );
else
pTabViewShell->MoveCursorEnter( true );
break;
case SID_CURSORENTERDOWN:
if (rReq.IsAPI())
pTabViewShell->MoveCursorRel( 0, 1, SC_FOLLOW_LINE, false );
else
pTabViewShell->MoveCursorEnter( false );
break;
case SID_SELECT_COL:
{
const SfxPoolItem* pColItem;
const SfxPoolItem* pModifierItem;
if ( pReqArgs && pReqArgs->HasItem( FN_PARAM_1, &pColItem ) &&
pReqArgs->HasItem( FN_PARAM_2, &pModifierItem ) )
{
SCCOL nCol = static_cast<SCCOL>(static_cast<const SfxInt32Item*>(pColItem)->GetValue());
sal_Int16 nModifier = static_cast<const SfxInt16Item*>(pModifierItem)->GetValue();
pTabViewShell->MarkColumns( nCol, nModifier );
}
else
pTabViewShell->MarkColumns();
}
break;
case SID_SELECT_ROW:
{
const SfxPoolItem* pRowItem;
const SfxPoolItem* pModifierItem;
if ( pReqArgs && pReqArgs->HasItem( FN_PARAM_1, &pRowItem ) &&
pReqArgs->HasItem( FN_PARAM_2, &pModifierItem ) )
{
SCROW nRow = static_cast<SCROW>(static_cast<const SfxInt32Item*>(pRowItem)->GetValue());
sal_Int16 nModifier = static_cast<const SfxInt16Item*>(pModifierItem)->GetValue();
pTabViewShell->MarkRows( nRow, nModifier );
}
else
pTabViewShell->MarkRows();
}
break;
case SID_SELECT_NONE:
pTabViewShell->Unmark();
break;
case SID_ALIGNCURSOR:
pTabViewShell->AlignToCursor( GetViewData().GetCurX(), GetViewData().GetCurY(), SC_FOLLOW_JUMP );
break;
case SID_MARKDATAAREA:
pTabViewShell->MarkDataArea();
break;
case SID_MARKARRAYFORMULA:
pTabViewShell->MarkMatrixFormula();
break;
case SID_SETINPUTMODE:
SC_MOD()->SetInputMode( SC_INPUT_TABLE );
break;
case SID_FOCUS_INPUTLINE:
{
ScInputHandler* pHdl = SC_MOD()->GetInputHdl( pTabViewShell );
if (pHdl)
{
ScInputWindow* pWin = pHdl->GetInputWindow();
if (pWin)
pWin->SwitchToTextWin();
}
}
break;
case SID_CURSORTOPOFSCREEN:
pTabViewShell->MoveCursorScreen( 0, -1, SC_FOLLOW_LINE, false );
break;
case SID_CURSORENDOFSCREEN:
pTabViewShell->MoveCursorScreen( 0, 1, SC_FOLLOW_LINE, false );
break;
default:
OSL_FAIL("Unknown message in ViewShell (Cursor)");
return;
}
rReq.Done();
}
void ScCellShell::ExecutePageSel( SfxRequest& rReq )
{
sal_uInt16 nSlotId = rReq.GetSlot();
switch ( nSlotId )
{
case SID_CURSORHOME_SEL: rReq.SetSlot( SID_CURSORHOME ); break;
case SID_CURSOREND_SEL: rReq.SetSlot( SID_CURSOREND ); break;
case SID_CURSORTOPOFFILE_SEL: rReq.SetSlot( SID_CURSORTOPOFFILE ); break;
case SID_CURSORENDOFFILE_SEL: rReq.SetSlot( SID_CURSORENDOFFILE ); break;
default:
OSL_FAIL("Unknown message in ViewShell (ExecutePageSel)");
return;
}
rReq.AppendItem( SfxBoolItem(FN_PARAM_2, true) );
ExecuteSlot( rReq, GetInterface() );
}
void ScCellShell::ExecutePage( SfxRequest& rReq )
{
ScTabViewShell* pTabViewShell = GetViewData().GetViewShell();
const SfxItemSet* pReqArgs = rReq.GetArgs();
sal_uInt16 nSlotId = rReq.GetSlot();
bool bSel = false;
bool bKeep = false;
if ( pReqArgs != nullptr )
{
const SfxPoolItem* pItem;
if (pReqArgs->HasItem(FN_PARAM_2, &pItem))
bSel = static_cast<const SfxBoolItem*>(pItem)->GetValue();
}
else
{
// evaluate locked selection mode
sal_uInt16 nLocked = pTabViewShell->GetLockedModifiers();
if ( nLocked & KEY_SHIFT )
bSel = true; // EXT
else if ( nLocked & KEY_MOD1 )
{
// ADD mode: keep the selection, start a new block when marking with shift again
bKeep = true;
}
}
pTabViewShell->ExecuteInputDirect();
switch ( nSlotId )
{
case SID_CURSORHOME:
pTabViewShell->MoveCursorEnd( -1, 0, SC_FOLLOW_LINE, bSel, bKeep );
break;
case SID_CURSOREND:
pTabViewShell->MoveCursorEnd( 1, 0, SC_FOLLOW_JUMP, bSel, bKeep );
break;
case SID_CURSORTOPOFFILE:
pTabViewShell->MoveCursorEnd( -1, -1, SC_FOLLOW_LINE, bSel, bKeep );
break;
case SID_CURSORENDOFFILE:
pTabViewShell->MoveCursorEnd( 1, 1, SC_FOLLOW_JUMP_END, bSel, bKeep );
break;
default:
OSL_FAIL("Unknown message in ViewShell (ExecutePage)");
return;
}
rReq.AppendItem( SfxBoolItem(FN_PARAM_2, bSel) );
rReq.Done();
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'ExecuteSlot' is required to be utilized.