/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <memory>
#include <strings.hrc>
#include <strings.hxx>
#include <core_resource.hxx>
#include <WCopyTable.hxx>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/sdb/application/XCopyTableWizard.hpp>
#include <com/sun/star/sdb/application/CopyTableContinuation.hpp>
#include <com/sun/star/sdb/application/CopyTableOperation.hpp>
#include <com/sun/star/ucb/AlreadyInitializedException.hpp>
#include <com/sun/star/lang/NotInitializedException.hpp>
#include <com/sun/star/sdbc/XDataSource.hpp>
#include <com/sun/star/sdbc/DataType.hpp>
#include <com/sun/star/container/XNameAccess.hpp>
#include <com/sun/star/container/XChild.hpp>
#include <com/sun/star/task/InteractionHandler.hpp>
#include <com/sun/star/frame/XModel.hpp>
#include <com/sun/star/sdb/DatabaseContext.hpp>
#include <com/sun/star/sdb/XDocumentDataSource.hpp>
#include <com/sun/star/sdb/XCompletedConnection.hpp>
#include <com/sun/star/sdb/CommandType.hpp>
#include <com/sun/star/sdbcx/XTablesSupplier.hpp>
#include <com/sun/star/sdb/XQueriesSupplier.hpp>
#include <com/sun/star/lang/DisposedException.hpp>
#include <com/sun/star/sdb/XSingleSelectQueryComposer.hpp>
#include <com/sun/star/sdbc/XParameters.hpp>
#include <com/sun/star/sdbc/XRow.hpp>
#include <com/sun/star/sdbcx/XRowLocate.hpp>
#include <com/sun/star/sdbc/XResultSetMetaDataSupplier.hpp>
#include <com/sun/star/sdb/SQLContext.hpp>
#include <com/sun/star/sdbc/DriverManager.hpp>
#include <com/sun/star/sdbc/ConnectionPool.hpp>
#include <comphelper/processfactory.hxx>
#include <comphelper/interaction.hxx>
#include <comphelper/namedvaluecollection.hxx>
#include <comphelper/proparrhlp.hxx>
#include <connectivity/dbexception.hxx>
#include <connectivity/dbtools.hxx>
#include <cppuhelper/exc_hlp.hxx>
#include <cppuhelper/implbase.hxx>
#include <comphelper/interfacecontainer3.hxx>
#include <o3tl/safeint.hxx>
#include <rtl/ustrbuf.hxx>
#include <sal/log.hxx>
#include <svtools/genericunodialog.hxx>
#include <toolkit/helper/vclunohelper.hxx>
#include <comphelper/diagnose_ex.hxx>
#include <unotools/sharedunocomponent.hxx>
#include <vcl/svapp.hxx>
namespace dbaui
{
using ::com::sun::star::uno::Reference;
using ::com::sun::star::uno::XInterface;
using ::com::sun::star::uno::UNO_QUERY;
using ::com::sun::star::uno::UNO_QUERY_THROW;
using ::com::sun::star::uno::UNO_SET_THROW;
using ::com::sun::star::uno::Exception;
using ::com::sun::star::uno::RuntimeException;
using ::com::sun::star::uno::Any;
using ::com::sun::star::uno::Sequence;
using ::com::sun::star::uno::XComponentContext;
using ::com::sun::star::beans::XPropertySetInfo;
using ::com::sun::star::lang::XMultiServiceFactory;
using ::com::sun::star::beans::Property;
using ::com::sun::star::sdb::application::XCopyTableWizard;
using ::com::sun::star::sdb::application::XCopyTableListener;
using ::com::sun::star::sdb::application::CopyTableRowEvent;
using ::com::sun::star::beans::Optional;
using ::com::sun::star::lang::IllegalArgumentException;
using ::com::sun::star::ucb::AlreadyInitializedException;
using ::com::sun::star::beans::XPropertySet;
using ::com::sun::star::lang::NotInitializedException;
using ::com::sun::star::lang::XServiceInfo;
using ::com::sun::star::sdbc::XConnection;
using ::com::sun::star::sdbc::XDataSource;
using ::com::sun::star::container::XNameAccess;
using ::com::sun::star::container::XChild;
using ::com::sun::star::task::InteractionHandler;
using ::com::sun::star::task::XInteractionHandler;
using ::com::sun::star::frame::XModel;
using ::com::sun::star::sdb::DatabaseContext;
using ::com::sun::star::sdb::XDatabaseContext;
using ::com::sun::star::sdb::XDocumentDataSource;
using ::com::sun::star::sdb::XCompletedConnection;
using ::com::sun::star::lang::WrappedTargetException;
using ::com::sun::star::sdbcx::XTablesSupplier;
using ::com::sun::star::sdb::XQueriesSupplier;
using ::com::sun::star::lang::DisposedException;
using ::com::sun::star::sdbc::XPreparedStatement;
using ::com::sun::star::sdb::XSingleSelectQueryComposer;
using ::com::sun::star::sdbc::XDatabaseMetaData;
using ::com::sun::star::sdbcx::XColumnsSupplier;
using ::com::sun::star::sdbc::XParameters;
using ::com::sun::star::sdbc::XResultSet;
using ::com::sun::star::sdbc::XRow;
using ::com::sun::star::sdbcx::XRowLocate;
using ::com::sun::star::sdbc::XResultSetMetaDataSupplier;
using ::com::sun::star::sdbc::XResultSetMetaData;
using ::com::sun::star::sdbc::SQLException;
using ::com::sun::star::sdb::SQLContext;
using ::com::sun::star::sdbc::ConnectionPool;
using ::com::sun::star::sdbc::XDriverManager;
using ::com::sun::star::sdbc::DriverManager;
using ::com::sun::star::beans::PropertyValue;
namespace CopyTableOperation = ::com::sun::star::sdb::application::CopyTableOperation;
namespace CopyTableContinuation = ::com::sun::star::sdb::application::CopyTableContinuation;
namespace CommandType = ::com::sun::star::sdb::CommandType;
namespace DataType = ::com::sun::star::sdbc::DataType;
typedef ::utl::SharedUNOComponent< XConnection > SharedConnection;
// CopyTableWizard
typedef ::svt::OGenericUnoDialog CopyTableWizard_DialogBase;
typedef ::cppu::ImplInheritanceHelper< CopyTableWizard_DialogBase
, XCopyTableWizard
> CopyTableWizard_Base;
namespace {
class CopyTableWizard
:public CopyTableWizard_Base
,public ::comphelper::OPropertyArrayUsageHelper< CopyTableWizard >
{
public:
// XServiceInfo
virtual OUString SAL_CALL getImplementationName() override;
virtual css::uno::Sequence<OUString> SAL_CALL getSupportedServiceNames() override;
// XCopyTableWizard
virtual ::sal_Int16 SAL_CALL getOperation() override;
virtual void SAL_CALL setOperation( ::sal_Int16 _operation ) override;
virtual OUString SAL_CALL getDestinationTableName() override;
virtual void SAL_CALL setDestinationTableName( const OUString& _destinationTableName ) override;
virtual Optional< OUString > SAL_CALL getCreatePrimaryKey() override;
virtual void SAL_CALL setCreatePrimaryKey( const Optional< OUString >& _newPrimaryKey ) override;
virtual sal_Bool SAL_CALL getUseHeaderLineAsColumnNames() override;
virtual void SAL_CALL setUseHeaderLineAsColumnNames( sal_Bool _bUseHeaderLineAsColumnNames ) override;
virtual void SAL_CALL addCopyTableListener( const Reference< XCopyTableListener >& Listener ) override;
virtual void SAL_CALL removeCopyTableListener( const Reference< XCopyTableListener >& Listener ) override;
// XCopyTableWizard::XExecutableDialog
virtual void SAL_CALL setTitle( const OUString& aTitle ) override;
virtual ::sal_Int16 SAL_CALL execute( ) override;
// XInitialization
virtual void SAL_CALL initialize( const Sequence< Any >& aArguments ) override;
// XPropertySet
virtual Reference< XPropertySetInfo > SAL_CALL getPropertySetInfo() override;
virtual ::cppu::IPropertyArrayHelper& SAL_CALL getInfoHelper() override;
// OPropertyArrayUsageHelper
virtual ::cppu::IPropertyArrayHelper* createArrayHelper( ) const override;
public:
::osl::Mutex& getMutex() { return m_aMutex; }
bool isInitialized() const { return m_xSourceConnection.is() && m_pSourceObject && m_xDestConnection.is(); }
explicit CopyTableWizard( const Reference< XComponentContext >& _rxORB );
virtual ~CopyTableWizard() override;
protected:
// OGenericUnoDialog overridables
virtual std::unique_ptr<weld::DialogController> createDialog(const css::uno::Reference<css::awt::XWindow>& rParent) override;
virtual void executedDialog( sal_Int16 _nExecutionResult ) override;
private:
/// ensures our current attribute values are reflected in the dialog
void impl_attributesToDialog_nothrow( OCopyTableWizard& _rDialog ) const;
/// ensures the current dialog settings are reflected in our attributes
void impl_dialogToAttributes_nothrow( const OCopyTableWizard& _rDialog );
/** returns our typed dialog
@throws css::uno::RuntimeException
if we don't have a dialog at the moment the method is called
*/
OCopyTableWizard&
impl_getDialog_throw();
/** ensures the given argument sequence contains a valid data access descriptor at the given position
@param _rAllArgs
the arguments as passed to ->initialize
@param _nArgPos
the position within ->_rAllArgs which contains the data access descriptor
@param _out_rxConnection
will, upon successful return, contain the connection for the data source
@param _out_rxDocInteractionHandler
will, upon successful return, contain the interaction handler which could
be deduced from database document described by the descriptor, if any.
(It is possible that the descriptor does not allow to deduce a database document,
in which case <code>_out_rxDocInteractionHandler</code> will be <NULL/>.)
@return the data access descriptor
*/
Reference< XPropertySet >
impl_ensureDataAccessDescriptor_throw(
const Sequence< Any >& _rAllArgs,
const sal_Int16 _nArgPos,
SharedConnection& _out_rxConnection,
Reference< XInteractionHandler >& _out_rxDocInteractionHandler
) const;
/** extracts the source object (table or query) described by the given descriptor,
relative to m_xSourceConnection
*/
std::unique_ptr< ICopyTableSourceObject >
impl_extractSourceObject_throw(
const Reference< XPropertySet >& _rxDescriptor,
sal_Int32& _out_rCommandType
) const;
/** extracts the result set to copy records from, and the selection-related aspects, if any.
Effectively, this method extracts m_xSourceResultSet, m_aSourceSelection, and m_bSourceSelectionBookmarks.
If an inconsistent/insufficient sub set of those properties is present in the descriptor, and exception
is thrown.
*/
void impl_extractSourceResultSet_throw(
const Reference< XPropertySet >& i_rDescriptor
);
/** checks whether the given copy source descriptor contains settings which are not
supported (yet)
Throws an IllegalArgumentException if the descriptor contains a valid setting, which is
not yet supported.
*/
void impl_checkForUnsupportedSettings_throw(
const Reference< XPropertySet >& _rxSourceDescriptor ) const;
/** obtains the connection described by the given data access descriptor
If needed and possible, the method will ask the user, using the interaction
handler associated with the database described by the descriptor.
All errors are handled with the InteractionHandler associated with the data source,
if there is one. Else, they will be silenced (but asserted in non-product builds).
@param _rxDataSourceDescriptor
the data access descriptor describing the data source whose connection
should be obtained. Must not be <NULL/>.
@param _out_rxDocInteractionHandler
the interaction handler which could be deduced from the descriptor
@throws RuntimeException
if anything goes seriously wrong.
*/
SharedConnection
impl_extractConnection_throw(
const Reference< XPropertySet >& _rxDataSourceDescriptor,
Reference< XInteractionHandler >& _out_rxDocInteractionHandler
) const;
/** actually copies the table
This method is called after the dialog has been successfully executed.
*/
void impl_doCopy_nothrow();
/** creates the INSERT INTO statement
@param _xTable The destination table.
*/
OUString impl_getServerSideCopyStatement_throw( const Reference< XPropertySet >& _xTable );
/** creates the statement which, when executed, will produce the source data to copy
If the source object refers to a query which contains parameters, those parameters
are filled in, using an interaction handler.
*/
::utl::SharedUNOComponent< XPreparedStatement >
impl_createSourceStatement_throw() const;
/** copies the data rows from the given source result set to the given destination table
*/
void impl_copyRows_throw(
const Reference< XResultSet >& _rxSourceResultSet,
const Reference< XPropertySet >& _rxDestTable
);
/** processes an error which occurred during copying
First, all listeners are ask. If a listener tells to cancel or continue copying, this is reported to the
method's caller. If a listener tells to ask the user, this is done, and the user's decision is
reported to the method's caller.
@return
<TRUE/> if and only if copying should be continued.
*/
bool impl_processCopyError_nothrow(
const CopyTableRowEvent& _rEvent );
private:
Reference<XComponentContext> m_xContext;
// attributes
sal_Int16 m_nOperation;
OUString m_sDestinationTable;
Optional< OUString > m_aPrimaryKeyName;
bool m_bUseHeaderLineAsColumnNames;
// source
SharedConnection m_xSourceConnection;
sal_Int32 m_nCommandType;
std::unique_ptr< ICopyTableSourceObject >
m_pSourceObject;
Reference< XResultSet > m_xSourceResultSet;
Sequence< Any > m_aSourceSelection;
bool m_bSourceSelectionBookmarks;
// destination
SharedConnection m_xDestConnection;
// other
Reference< XInteractionHandler > m_xInteractionHandler;
::comphelper::OInterfaceContainerHelper3<XCopyTableListener>
m_aCopyTableListeners;
sal_Int16 m_nOverrideExecutionResult;
};
// MethodGuard
class CopyTableAccessGuard
{
public:
explicit CopyTableAccessGuard( CopyTableWizard& _rWizard )
:m_rWizard( _rWizard )
{
m_rWizard.getMutex().acquire();
if ( !m_rWizard.isInitialized() )
throw NotInitializedException();
}
~CopyTableAccessGuard()
{
m_rWizard.getMutex().release();
}
private:
CopyTableWizard& m_rWizard;
};
}
CopyTableWizard::CopyTableWizard( const Reference< XComponentContext >& _rxORB )
:CopyTableWizard_Base( _rxORB )
,m_xContext( _rxORB )
,m_nOperation( CopyTableOperation::CopyDefinitionAndData )
,m_aPrimaryKeyName( false, u"ID"_ustr )
,m_bUseHeaderLineAsColumnNames( true )
,m_nCommandType( CommandType::COMMAND )
,m_bSourceSelectionBookmarks( true )
,m_aCopyTableListeners( m_aMutex )
,m_nOverrideExecutionResult( -1 )
{
}
CopyTableWizard::~CopyTableWizard()
{
acquire();
// protect some members whose dtor might potentially throw
try { m_xSourceConnection.clear(); }
catch( const Exception& ) { DBG_UNHANDLED_EXCEPTION("dbaccess"); }
try { m_xDestConnection.clear(); }
catch( const Exception& ) { DBG_UNHANDLED_EXCEPTION("dbaccess"); }
// TODO: shouldn't we have explicit disposal support? If a listener is registered
// at our instance, and perhaps holds this our instance by a hard ref, then we'll never
// be destroyed.
// However, adding XComponent support to the GenericUNODialog probably requires
// some thinking - would it break existing clients which do not call a dispose, then?
}
OUString SAL_CALL CopyTableWizard::getImplementationName()
{
return u"org.openoffice.comp.dbu.CopyTableWizard"_ustr;
}
css::uno::Sequence<OUString> SAL_CALL CopyTableWizard::getSupportedServiceNames()
{
return { u"com.sun.star.sdb.application.CopyTableWizard"_ustr };
}
Reference< XPropertySetInfo > SAL_CALL CopyTableWizard::getPropertySetInfo()
{
Reference< XPropertySetInfo > xInfo( createPropertySetInfo( getInfoHelper() ) );
return xInfo;
}
::sal_Int16 SAL_CALL CopyTableWizard::getOperation()
{
CopyTableAccessGuard aGuard( *this );
return m_nOperation;
}
void SAL_CALL CopyTableWizard::setOperation( ::sal_Int16 _operation )
{
CopyTableAccessGuard aGuard( *this );
if ( ( _operation != CopyTableOperation::CopyDefinitionAndData )
&& ( _operation != CopyTableOperation::CopyDefinitionOnly )
&& ( _operation != CopyTableOperation::CreateAsView )
&& ( _operation != CopyTableOperation::AppendData )
)
throw IllegalArgumentException( OUString(), *this, 1 );
if ( ( _operation == CopyTableOperation::CreateAsView )
&& !OCopyTableWizard::supportsViews( m_xDestConnection )
)
throw IllegalArgumentException(
DBA_RES( STR_CTW_NO_VIEWS_SUPPORT ),
*this,
1
);
m_nOperation = _operation;
}
OUString SAL_CALL CopyTableWizard::getDestinationTableName()
{
CopyTableAccessGuard aGuard( *this );
return m_sDestinationTable;
}
void SAL_CALL CopyTableWizard::setDestinationTableName( const OUString& _destinationTableName )
{
CopyTableAccessGuard aGuard( *this );
m_sDestinationTable = _destinationTableName;
}
Optional< OUString > SAL_CALL CopyTableWizard::getCreatePrimaryKey()
{
CopyTableAccessGuard aGuard( *this );
return m_aPrimaryKeyName;
}
void SAL_CALL CopyTableWizard::setCreatePrimaryKey( const Optional< OUString >& _newPrimaryKey )
{
CopyTableAccessGuard aGuard( *this );
if ( _newPrimaryKey.IsPresent && !OCopyTableWizard::supportsPrimaryKey( m_xDestConnection ) )
throw IllegalArgumentException(
DBA_RES( STR_CTW_NO_PRIMARY_KEY_SUPPORT ),
*this,
1
);
m_aPrimaryKeyName = _newPrimaryKey;
}
sal_Bool SAL_CALL CopyTableWizard::getUseHeaderLineAsColumnNames()
{
CopyTableAccessGuard aGuard( *this );
return m_bUseHeaderLineAsColumnNames;
}
void SAL_CALL CopyTableWizard::setUseHeaderLineAsColumnNames( sal_Bool _bUseHeaderLineAsColumnNames )
{
CopyTableAccessGuard aGuard( *this );
m_bUseHeaderLineAsColumnNames = _bUseHeaderLineAsColumnNames;
}
void SAL_CALL CopyTableWizard::addCopyTableListener( const Reference< XCopyTableListener >& _rxListener )
{
CopyTableAccessGuard aGuard( *this );
if ( _rxListener.is() )
m_aCopyTableListeners.addInterface( _rxListener );
}
void SAL_CALL CopyTableWizard::removeCopyTableListener( const Reference< XCopyTableListener >& _rxListener )
{
CopyTableAccessGuard aGuard( *this );
if ( _rxListener.is() )
m_aCopyTableListeners.removeInterface( _rxListener );
}
void SAL_CALL CopyTableWizard::setTitle( const OUString& _rTitle )
{
CopyTableAccessGuard aGuard( *this );
CopyTableWizard_DialogBase::setTitle( _rTitle );
}
::sal_Int16 SAL_CALL CopyTableWizard::execute( )
{
CopyTableAccessGuard aGuard( *this );
m_nOverrideExecutionResult = -1;
sal_Int16 nExecutionResult = CopyTableWizard_DialogBase::execute();
if ( m_nOverrideExecutionResult )
nExecutionResult = m_nOverrideExecutionResult;
return nExecutionResult;
}
OCopyTableWizard& CopyTableWizard::impl_getDialog_throw()
{
OCopyTableWizard* pWizard = dynamic_cast<OCopyTableWizard*>(m_xDialog.get());
if ( !pWizard )
throw DisposedException( OUString(), *this );
return *pWizard;
}
void CopyTableWizard::impl_attributesToDialog_nothrow( OCopyTableWizard& _rDialog ) const
{
// primary key column
_rDialog.setCreatePrimaryKey( m_aPrimaryKeyName.IsPresent, m_aPrimaryKeyName.Value );
_rDialog.setUseHeaderLine(m_bUseHeaderLineAsColumnNames);
// everything else was passed at construction time already
}
void CopyTableWizard::impl_dialogToAttributes_nothrow( const OCopyTableWizard& _rDialog )
{
m_aPrimaryKeyName.IsPresent = _rDialog.shouldCreatePrimaryKey();
if ( m_aPrimaryKeyName.IsPresent )
m_aPrimaryKeyName.Value = _rDialog.getPrimaryKeyName();
else
m_aPrimaryKeyName.Value.clear();
m_sDestinationTable = _rDialog.getName();
m_nOperation = _rDialog.getOperation();
m_bUseHeaderLineAsColumnNames = _rDialog.UseHeaderLine();
}
namespace
{
/** tries to obtain the InteractionHandler associated with a given data source
If the data source is a sdb-level data source, it will have a DatabaseDocument associated
with it. This document may have an InteractionHandler used while loading it.
@throws RuntimeException
if it occurs during invoking any of the data source's methods, or if any of the involved
components violates its contract by not providing the required interfaces
*/
Reference< XInteractionHandler > lcl_getInteractionHandler_throw( const Reference< XDataSource >& _rxDataSource, const Reference< XInteractionHandler >& _rFallback )
{
Reference< XInteractionHandler > xHandler( _rFallback );
// try to obtain the document model
Reference< XModel > xDocumentModel;
Reference< XDocumentDataSource > xDocDataSource( _rxDataSource, UNO_QUERY );
if ( xDocDataSource.is() )
xDocumentModel.set( xDocDataSource->getDatabaseDocument(), UNO_QUERY_THROW );
// see whether the document model can provide a handler
if ( xDocumentModel.is() )
{
xHandler = ::comphelper::NamedValueCollection::getOrDefault( xDocumentModel->getArgs(), u"InteractionHandler", xHandler );
}
return xHandler;
}
/** tries to obtain the InteractionHandler associated with a given connection
If the connection belongs to a sdb-level data source, then this data source
is examined for an interaction handler. Else, <NULL/> is returned.
@throws RuntimeException
if it occurs during invoking any of the data source's methods, or if any of the involved
components violates its contract by not providing the required interfaces
*/
Reference< XInteractionHandler > lcl_getInteractionHandler_throw( const Reference< XConnection >& _rxConnection, const Reference< XInteractionHandler >& _rFallback )
{
// try whether there is a data source which the connection belongs to
Reference< XDataSource > xDataSource;
Reference< XChild > xAsChild( _rxConnection, UNO_QUERY );
if ( xAsChild.is() )
xDataSource.set(xAsChild->getParent(), css::uno::UNO_QUERY);
if ( xDataSource.is() )
return lcl_getInteractionHandler_throw( xDataSource, _rFallback );
return _rFallback;
}
}
Reference< XPropertySet > CopyTableWizard::impl_ensureDataAccessDescriptor_throw(
const Sequence< Any >& _rAllArgs, const sal_Int16 _nArgPos, SharedConnection& _out_rxConnection,
Reference< XInteractionHandler >& _out_rxDocInteractionHandler ) const
{
Reference< XPropertySet > xDescriptor;
_rAllArgs[ _nArgPos ] >>= xDescriptor;
// the descriptor must be non-NULL, of course
bool bIsValid = xDescriptor.is();
// it must support the proper service
if ( bIsValid )
{
Reference< XServiceInfo > xSI( xDescriptor, UNO_QUERY );
bIsValid = ( xSI.is()
&& xSI->supportsService( u"com.sun.star.sdb.DataAccessDescriptor"_ustr ) );
}
// it must be able to provide a connection
if ( bIsValid )
{
_out_rxConnection = impl_extractConnection_throw( xDescriptor, _out_rxDocInteractionHandler );
bIsValid = _out_rxConnection.is();
}
if ( !bIsValid )
{
throw IllegalArgumentException(
DBA_RES( STR_CTW_INVALID_DATA_ACCESS_DESCRIPTOR ),
*const_cast< CopyTableWizard* >( this ),
_nArgPos + 1
);
}
return xDescriptor;
}
namespace
{
bool lcl_hasNonEmptyStringValue_throw( const Reference< XPropertySet >& _rxDescriptor,
const Reference< XPropertySetInfo >& rxPSI, const OUString& _rPropertyName )
{
OUString sValue;
if ( rxPSI->hasPropertyByName( _rPropertyName ) )
{
OSL_VERIFY( _rxDescriptor->getPropertyValue( _rPropertyName ) >>= sValue );
}
return !sValue.isEmpty();
}
}
void CopyTableWizard::impl_checkForUnsupportedSettings_throw( const Reference< XPropertySet >& _rxSourceDescriptor ) const
{
OSL_PRECOND( _rxSourceDescriptor.is(), "CopyTableWizard::impl_checkForUnsupportedSettings_throw: illegal argument!" );
Reference< XPropertySetInfo > xPSI( _rxSourceDescriptor->getPropertySetInfo(), UNO_SET_THROW );
OUString sUnsupportedSetting;
const OUString aSettings[] = {
PROPERTY_FILTER, PROPERTY_ORDER, PROPERTY_HAVING_CLAUSE, PROPERTY_GROUP_BY
};
for (const auto & aSetting : aSettings)
{
if ( lcl_hasNonEmptyStringValue_throw( _rxSourceDescriptor, xPSI, aSetting ) )
{
sUnsupportedSetting = aSetting;
break;
}
}
if ( !sUnsupportedSetting.isEmpty() )
{
OUString sMessage(
DBA_RES(STR_CTW_ERROR_UNSUPPORTED_SETTING).
replaceFirst("$name$", sUnsupportedSetting));
throw IllegalArgumentException(
sMessage,
*const_cast< CopyTableWizard* >( this ),
1
);
}
}
std::unique_ptr< ICopyTableSourceObject > CopyTableWizard::impl_extractSourceObject_throw( const Reference< XPropertySet >& _rxDescriptor, sal_Int32& _out_rCommandType ) const
{
OSL_PRECOND( _rxDescriptor.is() && m_xSourceConnection.is(), "CopyTableWizard::impl_extractSourceObject_throw: illegal arguments!" );
Reference< XPropertySetInfo > xPSI( _rxDescriptor->getPropertySetInfo(), UNO_SET_THROW );
if ( !xPSI->hasPropertyByName( PROPERTY_COMMAND )
|| !xPSI->hasPropertyByName( PROPERTY_COMMAND_TYPE )
)
throw IllegalArgumentException(u"Expecting a table or query specification."_ustr,
// TODO: resource
*const_cast< CopyTableWizard* >( this ), 1);
OUString sCommand;
_out_rCommandType = CommandType::COMMAND;
OSL_VERIFY( _rxDescriptor->getPropertyValue( PROPERTY_COMMAND ) >>= sCommand );
OSL_VERIFY( _rxDescriptor->getPropertyValue( PROPERTY_COMMAND_TYPE ) >>= _out_rCommandType );
std::unique_ptr< ICopyTableSourceObject > pSourceObject;
Reference< XNameAccess > xContainer;
switch ( _out_rCommandType )
{
case CommandType::TABLE:
{
Reference< XTablesSupplier > xSuppTables( m_xSourceConnection.getTyped(), UNO_QUERY );
if ( xSuppTables.is() )
xContainer.set( xSuppTables->getTables(), UNO_SET_THROW );
}
break;
case CommandType::QUERY:
{
Reference< XQueriesSupplier > xSuppQueries( m_xSourceConnection.getTyped(), UNO_QUERY );
if ( xSuppQueries.is() )
xContainer.set( xSuppQueries->getQueries(), UNO_SET_THROW );
}
break;
default:
throw IllegalArgumentException(
DBA_RES( STR_CTW_ONLY_TABLES_AND_QUERIES_SUPPORT ),
*const_cast< CopyTableWizard* >( this ),
1
);
}
if ( xContainer.is() )
{
pSourceObject.reset( new ObjectCopySource( m_xSourceConnection,
Reference< XPropertySet >( xContainer->getByName( sCommand ), UNO_QUERY_THROW ) ) );
}
else
{
// our source connection is an SDBC level connection only, not a SDBCX level one
// Which means it cannot provide the to-be-copied object as component.
if ( _out_rCommandType == CommandType::QUERY )
// we cannot copy a query if the connection cannot provide it ...
throw IllegalArgumentException(
DBA_RES( STR_CTW_ERROR_NO_QUERY ),
*const_cast< CopyTableWizard* >( this ),
1
);
pSourceObject.reset( new NamedTableCopySource( m_xSourceConnection, sCommand ) );
}
return pSourceObject;
}
void CopyTableWizard::impl_extractSourceResultSet_throw( const Reference< XPropertySet >& i_rDescriptor )
{
Reference< XPropertySetInfo > xPSI( i_rDescriptor->getPropertySetInfo(), UNO_SET_THROW );
// extract relevant settings
if ( xPSI->hasPropertyByName( PROPERTY_RESULT_SET ) )
m_xSourceResultSet.set( i_rDescriptor->getPropertyValue( PROPERTY_RESULT_SET ), UNO_QUERY );
if ( xPSI->hasPropertyByName( PROPERTY_SELECTION ) )
OSL_VERIFY( i_rDescriptor->getPropertyValue( PROPERTY_SELECTION ) >>= m_aSourceSelection );
if ( xPSI->hasPropertyByName( PROPERTY_BOOKMARK_SELECTION ) )
OSL_VERIFY( i_rDescriptor->getPropertyValue( PROPERTY_BOOKMARK_SELECTION ) >>= m_bSourceSelectionBookmarks );
// sanity checks
const bool bHasResultSet = m_xSourceResultSet.is();
const bool bHasSelection = m_aSourceSelection.hasElements();
if ( bHasSelection && !bHasResultSet )
throw IllegalArgumentException(u"A result set is needed when specifying a selection to copy."_ustr,
// TODO: resource
*this, 1);
if ( bHasSelection && m_bSourceSelectionBookmarks )
{
Reference< XRowLocate > xRowLocate( m_xSourceResultSet, UNO_QUERY );
if ( !xRowLocate.is() )
{
::dbtools::throwGenericSQLException(
DBA_RES(STR_CTW_COPY_SOURCE_NEEDS_BOOKMARKS),
*this
);
}
}
}
SharedConnection CopyTableWizard::impl_extractConnection_throw( const Reference< XPropertySet >& _rxDataSourceDescriptor,
Reference< XInteractionHandler >& _out_rxDocInteractionHandler ) const
{
SharedConnection xConnection;
OSL_PRECOND( _rxDataSourceDescriptor.is(), "CopyTableWizard::impl_extractConnection_throw: no descriptor!" );
if ( !_rxDataSourceDescriptor.is() )
return xConnection;
Reference< XInteractionHandler > xInteractionHandler;
do
{
Reference< XPropertySetInfo > xPSI( _rxDataSourceDescriptor->getPropertySetInfo(), UNO_SET_THROW );
// if there's an ActiveConnection, use it
if ( xPSI->hasPropertyByName( PROPERTY_ACTIVE_CONNECTION ) )
{
Reference< XConnection > xPure;
OSL_VERIFY( _rxDataSourceDescriptor->getPropertyValue( PROPERTY_ACTIVE_CONNECTION ) >>= xPure );
xConnection.reset( xPure, SharedConnection::NoTakeOwnership );
}
if ( xConnection.is() )
{
xInteractionHandler = lcl_getInteractionHandler_throw( xConnection.getTyped(), m_xInteractionHandler );
SAL_WARN_IF( !xInteractionHandler.is(), "dbaccess.ui", "CopyTableWizard::impl_extractConnection_throw: lcl_getInteractionHandler_throw returned nonsense!" );
break;
}
// there could be a DataSourceName or a DatabaseLocation, describing the css.sdb.DataSource
OUString sDataSource, sDatabaseLocation;
if ( xPSI->hasPropertyByName( PROPERTY_DATASOURCENAME ) )
OSL_VERIFY( _rxDataSourceDescriptor->getPropertyValue( PROPERTY_DATASOURCENAME ) >>= sDataSource );
if ( xPSI->hasPropertyByName( PROPERTY_DATABASE_LOCATION ) )
OSL_VERIFY( _rxDataSourceDescriptor->getPropertyValue( PROPERTY_DATABASE_LOCATION ) >>= sDatabaseLocation );
// need a DatabaseContext for loading the data source
Reference< XDatabaseContext > xDatabaseContext = DatabaseContext::create( m_xContext );
Reference< XDataSource > xDataSource;
if ( !sDataSource.isEmpty() )
xDataSource.set( xDatabaseContext->getByName( sDataSource ), UNO_QUERY_THROW );
if ( !xDataSource.is() && !sDatabaseLocation.isEmpty() )
xDataSource.set( xDatabaseContext->getByName( sDatabaseLocation ), UNO_QUERY_THROW );
if ( xDataSource.is() )
{
// first, try connecting with completion
xInteractionHandler = lcl_getInteractionHandler_throw( xDataSource, m_xInteractionHandler );
SAL_WARN_IF( !xInteractionHandler.is(), "dbaccess.ui", "CopyTableWizard::impl_extractConnection_throw: lcl_getInteractionHandler_throw returned nonsense!" );
if ( xInteractionHandler.is() )
{
Reference< XCompletedConnection > xInteractiveConnection( xDataSource, UNO_QUERY );
if ( xInteractiveConnection.is() )
xConnection.reset( xInteractiveConnection->connectWithCompletion( xInteractionHandler ), SharedConnection::TakeOwnership );
}
// interactively connecting was not successful or possible -> connect without interaction
if ( !xConnection.is() )
{
xConnection.reset( xDataSource->getConnection( OUString(), OUString() ), SharedConnection::TakeOwnership );
}
}
if ( xConnection.is() )
break;
// finally, there could be a ConnectionResource/ConnectionInfo
OUString sConnectionResource;
Sequence< PropertyValue > aConnectionInfo;
if ( xPSI->hasPropertyByName( PROPERTY_CONNECTION_RESOURCE ) )
OSL_VERIFY( _rxDataSourceDescriptor->getPropertyValue( PROPERTY_CONNECTION_RESOURCE ) >>= sConnectionResource );
if ( xPSI->hasPropertyByName( PROPERTY_CONNECTION_INFO ) )
OSL_VERIFY( _rxDataSourceDescriptor->getPropertyValue( PROPERTY_CONNECTION_INFO ) >>= aConnectionInfo );
Reference< XDriverManager > xDriverManager;
try {
xDriverManager.set( ConnectionPool::create( m_xContext ), UNO_QUERY_THROW );
} catch( const Exception& ) { }
if ( !xDriverManager.is() )
// no connection pool installed
xDriverManager.set( DriverManager::create( m_xContext ), UNO_QUERY_THROW );
if ( aConnectionInfo.hasElements() )
xConnection.set( xDriverManager->getConnectionWithInfo( sConnectionResource, aConnectionInfo ), UNO_SET_THROW );
else
xConnection.set( xDriverManager->getConnection( sConnectionResource ), UNO_SET_THROW );
}
while ( false );
if ( xInteractionHandler != m_xInteractionHandler )
_out_rxDocInteractionHandler = std::move(xInteractionHandler);
return xConnection;
}
::utl::SharedUNOComponent< XPreparedStatement > CopyTableWizard::impl_createSourceStatement_throw() const
{
OSL_PRECOND( m_xSourceConnection.is(), "CopyTableWizard::impl_createSourceStatement_throw: illegal call!" );
if ( !m_xSourceConnection.is() )
throw RuntimeException( u"CopyTableWizard::impl_createSourceStatement_throw: illegal call!"_ustr, *const_cast< CopyTableWizard* >( this ));
::utl::SharedUNOComponent< XPreparedStatement > xStatement;
switch ( m_nCommandType )
{
case CommandType::TABLE:
xStatement.set( m_pSourceObject->getPreparedSelectStatement(), UNO_SET_THROW );
break;
case CommandType::QUERY:
{
OUString sQueryCommand( m_pSourceObject->getSelectStatement() );
xStatement.set( m_pSourceObject->getPreparedSelectStatement(), UNO_SET_THROW );
// check whether we have to fill in parameter values
// create and fill a composer
Reference< XMultiServiceFactory > xFactory( m_xSourceConnection, UNO_QUERY );
::utl::SharedUNOComponent< XSingleSelectQueryComposer > xComposer;
if ( xFactory.is() )
// note: connections below the sdb-level are allowed to not support the XMultiServiceFactory interface
xComposer.set( xFactory->createInstance( SERVICE_NAME_SINGLESELECTQUERYCOMPOSER ), UNO_QUERY );
if ( xComposer.is() )
{
xComposer->setQuery( sQueryCommand );
Reference< XParameters > xStatementParams( xStatement, UNO_QUERY );
OSL_ENSURE( xStatementParams.is(), "CopyTableWizard::impl_createSourceStatement_throw: no access to the statement's parameters!" );
// the statement should be a css.sdbc.PreparedStatement (this is what
// we created), and a prepared statement is required to support XParameters
if ( xStatementParams.is() )
{
OSL_ENSURE( m_xInteractionHandler.is(),
"CopyTableWizard::impl_createSourceStatement_throw: no interaction handler for the parameters request!" );
// we should always have an interaction handler - as last fallback, we create an own one in ::initialize
if ( m_xInteractionHandler.is() )
::dbtools::askForParameters( xComposer, xStatementParams, m_xSourceConnection, m_xInteractionHandler );
}
}
}
break;
default:
// this should not have survived initialization phase
throw RuntimeException(u"No case matched, this should not have survived the initialization phase"_ustr, *const_cast< CopyTableWizard* >( this ));
}
return xStatement;
}
namespace
{
class ValueTransfer
{
public:
ValueTransfer( std::vector< sal_Int32 > _rColTypes,
const Reference< XRow >& _rxSource, const Reference< XParameters >& _rxDest )
:m_ColTypes( std::move(_rColTypes) )
,m_xSource( _rxSource )
,m_xDest( _rxDest )
{
}
template< typename VALUE_TYPE >
void transferValue( sal_Int32 _nSourcePos, sal_Int32 _nDestPos,
VALUE_TYPE ( SAL_CALL XRow::*_pGetter )( sal_Int32 ),
void (SAL_CALL XParameters::*_pSetter)( sal_Int32, VALUE_TYPE ) )
{
VALUE_TYPE value( (m_xSource.get()->*_pGetter)( _nSourcePos ) );
if ( m_xSource->wasNull() )
m_xDest->setNull( _nDestPos, m_ColTypes[ _nSourcePos ] );
else
(m_xDest.get()->*_pSetter)( _nDestPos, value );
}
template< typename VALUE_TYPE >
void transferComplexValue( sal_Int32 _nSourcePos, sal_Int32 _nDestPos,
VALUE_TYPE ( SAL_CALL XRow::*_pGetter )( sal_Int32 ),
void (SAL_CALL XParameters::*_pSetter)( sal_Int32, const VALUE_TYPE& ) )
{
const VALUE_TYPE value( (m_xSource.get()->*_pGetter)( _nSourcePos ) );
if ( m_xSource->wasNull() )
m_xDest->setNull( _nDestPos, m_ColTypes[ _nSourcePos ] );
else
(m_xDest.get()->*_pSetter)( _nDestPos, value );
}
private:
const std::vector< sal_Int32 > m_ColTypes;
const Reference< XRow > m_xSource;
const Reference< XParameters > m_xDest;
};
}
bool CopyTableWizard::impl_processCopyError_nothrow( const CopyTableRowEvent& _rEvent )
{
try
{
::comphelper::OInterfaceIteratorHelper3 aIter( m_aCopyTableListeners );
while ( aIter.hasMoreElements() )
{
Reference< XCopyTableListener > xListener( aIter.next() );
sal_Int16 nListenerChoice = xListener->copyRowError( _rEvent );
switch ( nListenerChoice )
{
case CopyTableContinuation::Proceed: return true; // continue copying
case CopyTableContinuation::CallNextHandler: continue; // continue the loop, ask next listener
case CopyTableContinuation::Cancel: return false; // cancel copying
case CopyTableContinuation::AskUser: break; // stop asking the listeners, ask the user
default:
SAL_WARN("dbaccess.ui", "CopyTableWizard::impl_processCopyError_nothrow: invalid listener response!" );
// ask next listener
continue;
}
}
}
catch( const Exception& )
{
DBG_UNHANDLED_EXCEPTION("dbaccess");
}
// no listener felt responsible for the error, or a listener told to ask the user
try
{
css::uno::Any next;
::dbtools::SQLExceptionInfo aInfo( _rEvent.Error );
if ( aInfo.isValid() )
next = _rEvent.Error;
else
{
// a non-SQL exception happened
Exception aException;
OSL_VERIFY( _rEvent.Error >>= aException );
SQLContext aContext(aException.Message, aException.Context, {}, 0, {},
_rEvent.Error.getValueTypeName());
next <<= aContext;
}
SQLContext aError(DBA_RES(STR_ERROR_OCCURRED_WHILE_COPYING), *this, {}, 0, next, {});
::rtl::Reference< ::comphelper::OInteractionRequest > xRequest( new ::comphelper::OInteractionRequest( Any( aError ) ) );
::rtl::Reference< ::comphelper::OInteractionApprove > xYes = new ::comphelper::OInteractionApprove;
xRequest->addContinuation( xYes );
xRequest->addContinuation( new ::comphelper::OInteractionDisapprove );
OSL_ENSURE( m_xInteractionHandler.is(),
"CopyTableWizard::impl_processCopyError_nothrow: we always should have an interaction handler!" );
if ( m_xInteractionHandler.is() )
m_xInteractionHandler->handle( xRequest );
if ( xYes->wasSelected() )
// continue copying
return true;
}
catch( const Exception& )
{
DBG_UNHANDLED_EXCEPTION("dbaccess");
}
// cancel copying
return false;
}
void CopyTableWizard::impl_copyRows_throw( const Reference< XResultSet >& _rxSourceResultSet,
const Reference< XPropertySet >& _rxDestTable )
{
OSL_PRECOND( m_xDestConnection.is(), "CopyTableWizard::impl_copyRows_throw: illegal call!" );
if ( !m_xDestConnection.is() )
throw RuntimeException( u"m_xDestConnection is set to null, CopyTableWizard::impl_copyRows_throw: illegal call!"_ustr, *this );
Reference< XDatabaseMetaData > xDestMetaData( m_xDestConnection->getMetaData(), UNO_SET_THROW );
const OCopyTableWizard& rWizard = impl_getDialog_throw();
ODatabaseExport::TPositions aColumnPositions = rWizard.GetColumnPositions();
const bool bShouldCreatePrimaryKey = rWizard.shouldCreatePrimaryKey();
Reference< XRow > xRow ( _rxSourceResultSet, UNO_QUERY_THROW );
Reference< XRowLocate > xRowLocate ( _rxSourceResultSet, UNO_QUERY_THROW );
Reference< XResultSetMetaDataSupplier > xSuppResMeta( _rxSourceResultSet, UNO_QUERY_THROW );
Reference< XResultSetMetaData> xMeta( xSuppResMeta->getMetaData() );
// we need a vector which all types
sal_Int32 nCount = xMeta->getColumnCount();
std::vector< sal_Int32 > aSourceColTypes;
aSourceColTypes.reserve( nCount + 1 );
aSourceColTypes.push_back( -1 ); // just to avoid an every time i-1 call
std::vector< sal_Int32 > aSourcePrec;
aSourcePrec.reserve( nCount + 1 );
aSourcePrec.push_back( -1 ); // just to avoid an every time i-1 call
for ( sal_Int32 k=1; k <= nCount; ++k )
{
aSourceColTypes.push_back( xMeta->getColumnType( k ) );
aSourcePrec.push_back( xMeta->getPrecision( k ) );
}
// now create, fill and execute the prepared statement
Reference< XPreparedStatement > xStatement( ODatabaseExport::createPreparedStatement( xDestMetaData, _rxDestTable, aColumnPositions ), UNO_SET_THROW );
Reference< XParameters > xStatementParams( xStatement, UNO_QUERY_THROW );
const bool bSelectedRecordsOnly = m_aSourceSelection.hasElements();
const Any* pSelectedRow = m_aSourceSelection.begin();
const Any* pSelEnd = m_aSourceSelection.end();
sal_Int32 nRowCount = 0;
bool bContinue = false;
CopyTableRowEvent aCopyEvent;
aCopyEvent.Source = *this;
aCopyEvent.SourceData = _rxSourceResultSet;
do // loop as long as there are more rows or the selection ends
{
bContinue = false;
if ( bSelectedRecordsOnly )
{
if ( pSelectedRow != pSelEnd )
{
if ( m_bSourceSelectionBookmarks )
{
bContinue = xRowLocate->moveToBookmark( *pSelectedRow );
}
else
{
sal_Int32 nPos = 0;
OSL_VERIFY( *pSelectedRow >>= nPos );
bContinue = _rxSourceResultSet->absolute( nPos );
}
++pSelectedRow;
}
}
else
bContinue = _rxSourceResultSet->next();
if ( !bContinue )
{
break;
}
++nRowCount;
aCopyEvent.Error.clear();
try
{
bool bInsertedPrimaryKey = false;
// notify listeners
m_aCopyTableListeners.notifyEach( &XCopyTableListener::copyingRow, aCopyEvent );
sal_Int32 nSourceColumn( 1 );
ValueTransfer aTransfer( aSourceColTypes, xRow, xStatementParams );
for ( auto const& rColumnPos : aColumnPositions )
{
sal_Int32 nDestColumn = rColumnPos.first;
if ( nDestColumn == COLUMN_POSITION_NOT_FOUND )
{
++nSourceColumn;
// otherwise we don't get the correct value when only the 2nd source column was selected
continue;
}
if ( bShouldCreatePrimaryKey && !bInsertedPrimaryKey )
{
xStatementParams->setInt( 1, nRowCount );
++nSourceColumn;
bInsertedPrimaryKey = true;
continue;
}
if ( ( nSourceColumn < 1 ) || ( o3tl::make_unsigned(nSourceColumn) >= aSourceColTypes.size() ) )
{ // ( we have to check here against 1 because the parameters are 1 based)
::dbtools::throwSQLException(u"Internal error: invalid column type index."_ustr,
::dbtools::StandardSQLState::INVALID_DESCRIPTOR_INDEX, *this);
}
switch ( aSourceColTypes[ nSourceColumn ] )
{
case DataType::DOUBLE:
case DataType::REAL:
aTransfer.transferValue( nSourceColumn, nDestColumn, &XRow::getDouble, &XParameters::setDouble );
break;
case DataType::CHAR:
case DataType::VARCHAR:
case DataType::LONGVARCHAR:
case DataType::DECIMAL:
case DataType::NUMERIC:
aTransfer.transferComplexValue( nSourceColumn, nDestColumn, &XRow::getString, &XParameters::setString );
break;
case DataType::BIGINT:
aTransfer.transferValue( nSourceColumn, nDestColumn, &XRow::getLong, &XParameters::setLong );
break;
case DataType::FLOAT:
aTransfer.transferValue( nSourceColumn, nDestColumn, &XRow::getFloat, &XParameters::setFloat );
break;
case DataType::LONGVARBINARY:
case DataType::BINARY:
case DataType::VARBINARY:
aTransfer.transferComplexValue( nSourceColumn, nDestColumn, &XRow::getBytes, &XParameters::setBytes );
break;
case DataType::DATE:
aTransfer.transferComplexValue( nSourceColumn, nDestColumn, &XRow::getDate, &XParameters::setDate );
break;
case DataType::TIME:
aTransfer.transferComplexValue( nSourceColumn, nDestColumn, &XRow::getTime, &XParameters::setTime );
break;
case DataType::TIMESTAMP:
aTransfer.transferComplexValue( nSourceColumn, nDestColumn, &XRow::getTimestamp, &XParameters::setTimestamp );
break;
case DataType::BIT:
if ( aSourcePrec[nSourceColumn] > 1 )
{
aTransfer.transferComplexValue( nSourceColumn, nDestColumn, &XRow::getBytes, &XParameters::setBytes );
break;
}
[[fallthrough]];
case DataType::BOOLEAN:
aTransfer.transferValue( nSourceColumn, nDestColumn, &XRow::getBoolean, &XParameters::setBoolean );
break;
case DataType::TINYINT:
aTransfer.transferValue( nSourceColumn, nDestColumn, &XRow::getByte, &XParameters::setByte );
break;
case DataType::SMALLINT:
aTransfer.transferValue( nSourceColumn, nDestColumn, &XRow::getShort, &XParameters::setShort );
break;
case DataType::INTEGER:
aTransfer.transferValue( nSourceColumn, nDestColumn, &XRow::getInt, &XParameters::setInt );
break;
case DataType::BLOB:
aTransfer.transferComplexValue( nSourceColumn, nDestColumn, &XRow::getBlob, &XParameters::setBlob );
break;
case DataType::CLOB:
aTransfer.transferComplexValue( nSourceColumn, nDestColumn, &XRow::getClob, &XParameters::setClob );
break;
default:
{
OUString aMessage( DBA_RES( STR_CTW_UNSUPPORTED_COLUMN_TYPE ) );
aMessage = aMessage.replaceFirst( "$type$", OUString::number( aSourceColTypes[ nSourceColumn ] ) );
aMessage = aMessage.replaceFirst( "$pos$", OUString::number( nSourceColumn ) );
::dbtools::throwSQLException(
aMessage,
::dbtools::StandardSQLState::INVALID_SQL_DATA_TYPE,
*this
);
}
}
++nSourceColumn;
}
xStatement->executeUpdate();
// notify listeners
m_aCopyTableListeners.notifyEach( &XCopyTableListener::copiedRow, aCopyEvent );
}
catch( const Exception& )
{
TOOLS_WARN_EXCEPTION("dbaccess", "");
aCopyEvent.Error = ::cppu::getCaughtException();
}
if ( aCopyEvent.Error.hasValue() )
bContinue = impl_processCopyError_nothrow( aCopyEvent );
}
while( bContinue );
}
void CopyTableWizard::impl_doCopy_nothrow()
{
Any aError;
try
{
OCopyTableWizard& rWizard( impl_getDialog_throw() );
weld::WaitObject aWO(rWizard.getDialog());
Reference< XPropertySet > xTable;
switch ( rWizard.getOperation() )
{
case CopyTableOperation::CopyDefinitionOnly:
case CopyTableOperation::CopyDefinitionAndData:
{
xTable = rWizard.createTable();
if( !xTable.is() )
{
SAL_WARN("dbaccess.ui", "CopyTableWizard::impl_doCopy_nothrow: createTable should throw here, shouldn't it?" );
break;
}
if( CopyTableOperation::CopyDefinitionOnly == rWizard.getOperation() )
break;
[[fallthrough]];
}
case CopyTableOperation::AppendData:
{
// note that the CopyDefinitionAndData case falls through to here.
assert((rWizard.getOperation() == CopyTableOperation::CopyDefinitionAndData) ||
(rWizard.getOperation() == CopyTableOperation::AppendData));
assert((rWizard.getOperation() == CopyTableOperation::CopyDefinitionAndData) == xTable.is());
if ( !xTable.is() )
{
assert(rWizard.getOperation() == CopyTableOperation::AppendData);
xTable = rWizard.getTable();
if ( !xTable.is() )
{
SAL_WARN("dbaccess.ui", "CopyTableWizard::impl_doCopy_nothrow: getTable should throw here, shouldn't it?" );
break;
}
}
::utl::SharedUNOComponent< XPreparedStatement > xSourceStatement;
::utl::SharedUNOComponent< XResultSet > xSourceResultSet;
if ( m_xSourceResultSet.is() )
{
xSourceResultSet.reset( m_xSourceResultSet, ::utl::SharedUNOComponent< XResultSet >::NoTakeOwnership );
}
else
{
const bool bIsSameConnection = ( m_xSourceConnection.getTyped() == m_xDestConnection.getTyped() );
const bool bIsTable = ( CommandType::TABLE == m_nCommandType );
bool bDone = false;
if ( bIsSameConnection && bIsTable )
{
// try whether the server supports copying via SQL
try
{
m_xDestConnection->createStatement()->executeUpdate( impl_getServerSideCopyStatement_throw(xTable) );
bDone = true;
}
catch( const Exception& )
{
// this is allowed.
}
}
if ( !bDone )
{
xSourceStatement.set( impl_createSourceStatement_throw(), UNO_SET_THROW );
xSourceResultSet.set( xSourceStatement->executeQuery(), UNO_SET_THROW );
}
}
if ( xSourceResultSet.is() )
impl_copyRows_throw( xSourceResultSet, xTable );
// tdf#119962
const Reference< XDatabaseMetaData > xDestMetaData( m_xDestConnection->getMetaData(), UNO_SET_THROW );
OUString sDatabaseDest = xDestMetaData->getDatabaseProductName().toAsciiLowerCase();
// If we created a new primary key, then it won't necessarily be an IDENTITY column
const bool bShouldCreatePrimaryKey = rWizard.shouldCreatePrimaryKey();
if ( !bShouldCreatePrimaryKey && (sDatabaseDest.indexOf("firebird") != -1) )
{
const OUString sComposedTableName = ::dbtools::composeTableName( xDestMetaData, xTable, ::dbtools::EComposeRule::InDataManipulation, true );
OUString aSchema,aTable;
xTable->getPropertyValue(u"SchemaName"_ustr) >>= aSchema;
xTable->getPropertyValue(u"Name"_ustr) >>= aTable;
Any aCatalog = xTable->getPropertyValue(u"CatalogName"_ustr);
const Reference< XResultSet > xResultPKCL(xDestMetaData->getPrimaryKeys(aCatalog,aSchema,aTable));
Reference< XRow > xRowPKCL(xResultPKCL, UNO_QUERY_THROW);
OUString sPKCL;
if ( xRowPKCL.is() )
{
if (xResultPKCL->next())
{
sPKCL = xRowPKCL->getString(4);
}
}
if (!sPKCL.isEmpty())
{
OUString strSql = "SELECT MAX(\"" + sPKCL + "\") FROM " + sComposedTableName;
Reference< XResultSet > xResultMAXNUM(m_xDestConnection->createStatement()->executeQuery(strSql));
Reference< XRow > xRow(xResultMAXNUM, UNO_QUERY_THROW);
sal_Int64 maxVal = -1L;
if (xResultMAXNUM->next())
{
maxVal = xRow->getLong(1);
}
if (maxVal > 0L)
{
strSql = "ALTER TABLE " + sComposedTableName + " ALTER \"" + sPKCL + "\" RESTART WITH " + OUString::number(maxVal + 1);
m_xDestConnection->createStatement()->execute(strSql);
}
}
}
}
break;
case CopyTableOperation::CreateAsView:
rWizard.createView();
break;
default:
SAL_WARN("dbaccess.ui", "CopyTableWizard::impl_doCopy_nothrow: What operation, please?" );
break;
}
}
catch( const Exception& )
{
aError = ::cppu::getCaughtException();
SAL_WARN("dbaccess", exceptionToString(aError));
// silence the error of the user cancelling the parameter's dialog
SQLException aSQLError;
if ( ( aError >>= aSQLError ) && ( aSQLError.ErrorCode == ::dbtools::ParameterInteractionCancelled ) )
{
aError.clear();
m_nOverrideExecutionResult = RET_CANCEL;
}
}
if ( aError.hasValue() && m_xInteractionHandler.is() )
{
try
{
::rtl::Reference< ::comphelper::OInteractionRequest > xRequest( new ::comphelper::OInteractionRequest( aError ) );
m_xInteractionHandler->handle( xRequest );
}
catch( const Exception& )
{
DBG_UNHANDLED_EXCEPTION("dbaccess");
}
}
}
OUString CopyTableWizard::impl_getServerSideCopyStatement_throw(const Reference< XPropertySet >& _xTable)
{
const Reference<XColumnsSupplier> xDestColsSup(_xTable,UNO_QUERY_THROW);
const Sequence< OUString> aDestColumnNames = xDestColsSup->getColumns()->getElementNames();
const Reference< XDatabaseMetaData > xDestMetaData( m_xDestConnection->getMetaData(), UNO_SET_THROW );
const OUString sQuote = xDestMetaData->getIdentifierQuoteString();
OUStringBuffer sColumns;
// 1st check if the columns matching
for ( auto const & rColumnPositionPair : impl_getDialog_throw().GetColumnPositions() )
{
if ( COLUMN_POSITION_NOT_FOUND != rColumnPositionPair.second )
{
if ( !sColumns.isEmpty() )
sColumns.append(",");
sColumns.append(sQuote + aDestColumnNames[rColumnPositionPair.second - 1] + sQuote);
}
}
const OUString sComposedTableName = ::dbtools::composeTableName( xDestMetaData, _xTable, ::dbtools::EComposeRule::InDataManipulation, true );
OUString sSql("INSERT INTO " + sComposedTableName + " ( " + sColumns + " ) " + m_pSourceObject->getSelectStatement());
return sSql;
}
void SAL_CALL CopyTableWizard::initialize( const Sequence< Any >& _rArguments )
{
::osl::MutexGuard aGuard( m_aMutex );
if ( isInitialized() )
throw AlreadyInitializedException( OUString(), *this );
sal_Int32 nArgCount( _rArguments.getLength() );
if ( ( nArgCount != 2 ) && ( nArgCount != 3 ) )
throw IllegalArgumentException(
DBA_RES( STR_CTW_ILLEGAL_PARAMETER_COUNT ),
*this,
1
);
try
{
if ( nArgCount == 3 )
{ // ->createWithInteractionHandler
if ( !( _rArguments[2] >>= m_xInteractionHandler ) )
throw IllegalArgumentException(
DBA_RES( STR_CTW_ERROR_INVALID_INTERACTIONHANDLER ),
*this,
3
);
}
if ( !m_xInteractionHandler.is() )
m_xInteractionHandler = InteractionHandler::createWithParent(m_xContext, nullptr);
Reference< XInteractionHandler > xSourceDocHandler;
Reference< XPropertySet > xSourceDescriptor( impl_ensureDataAccessDescriptor_throw( _rArguments, 0, m_xSourceConnection, xSourceDocHandler ) );
impl_checkForUnsupportedSettings_throw( xSourceDescriptor );
m_pSourceObject = impl_extractSourceObject_throw( xSourceDescriptor, m_nCommandType );
impl_extractSourceResultSet_throw( xSourceDescriptor );
Reference< XInteractionHandler > xDestDocHandler;
impl_ensureDataAccessDescriptor_throw( _rArguments, 1, m_xDestConnection, xDestDocHandler );
if ( xDestDocHandler.is() && !m_xInteractionHandler.is() )
m_xInteractionHandler = std::move(xDestDocHandler);
Reference< XPropertySet > xInteractionHandler(m_xInteractionHandler, UNO_QUERY);
if (xInteractionHandler.is())
{
Any aParentWindow(xInteractionHandler->getPropertyValue(u"ParentWindow"_ustr));
aParentWindow >>= m_xParent;
}
}
catch( const RuntimeException& ) { throw; }
catch( const SQLException& ) { throw; }
catch( const Exception& )
{
throw WrappedTargetException(
DBA_RES( STR_CTW_ERROR_DURING_INITIALIZATION ),
*this,
::cppu::getCaughtException()
);
}
}
::cppu::IPropertyArrayHelper& CopyTableWizard::getInfoHelper()
{
return *getArrayHelper();
}
::cppu::IPropertyArrayHelper* CopyTableWizard::createArrayHelper( ) const
{
Sequence< Property > aProps;
describeProperties( aProps );
return new ::cppu::OPropertyArrayHelper( aProps );
}
std::unique_ptr<weld::DialogController> CopyTableWizard::createDialog(const css::uno::Reference<css::awt::XWindow>& rParent)
{
OSL_PRECOND( isInitialized(), "CopyTableWizard::createDialog: not initialized!" );
// this should have been prevented in ::execute already
auto xWizard = std::make_unique<OCopyTableWizard>(
Application::GetFrameWeld(rParent),
m_sDestinationTable,
m_nOperation,
*m_pSourceObject,
m_xSourceConnection.getTyped(),
m_xDestConnection.getTyped(),
m_xContext,
m_xInteractionHandler);
impl_attributesToDialog_nothrow(*xWizard);
return xWizard;
}
void CopyTableWizard::executedDialog( sal_Int16 _nExecutionResult )
{
CopyTableWizard_DialogBase::executedDialog( _nExecutionResult );
if ( _nExecutionResult == RET_OK )
impl_doCopy_nothrow();
// do this after impl_doCopy_nothrow: The attributes may change during copying, for instance
// if the user entered an unqualified table name
impl_dialogToAttributes_nothrow( impl_getDialog_throw() );
}
} // namespace dbaui
extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
org_openoffice_comp_dbu_CopyTableWizard_get_implementation(
css::uno::XComponentContext* context, css::uno::Sequence<css::uno::Any> const& )
{
return cppu::acquire(new ::dbaui::CopyTableWizard(context));
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1053 Calling the 'acquire' virtual function in the destructor may lead to unexpected result at runtime.
↑ V1051 Consider checking for misprints. It's possible that the 'nExecutionResult' should be checked here.