/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <vcl/errinf.hxx>
#include <comphelper/processfactory.hxx>
#include <comphelper/types.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld.hxx>
#include <svx/dataaccessdescriptor.hxx>
#include <sfx2/viewfrm.hxx>
#include <sal/log.hxx>
#include <osl/diagnose.h>
#include <comphelper/diagnose_ex.hxx>
#include <com/sun/star/sdb/CommandType.hpp>
#include <com/sun/star/sdb/XCompletedExecution.hpp>
#include <com/sun/star/sdbc/SQLException.hpp>
#include <com/sun/star/sdbc/XRow.hpp>
#include <com/sun/star/sdbc/XRowSet.hpp>
#include <com/sun/star/sdbc/XResultSetMetaDataSupplier.hpp>
#include <com/sun/star/sdbcx/XRowLocate.hpp>
#include <com/sun/star/task/InteractionHandler.hpp>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/frame/FrameSearchFlag.hpp>
#include <com/sun/star/view/XSelectionSupplier.hpp>
#include <dbdocfun.hxx>
#include <docsh.hxx>
#include <globstr.hrc>
#include <scresid.hxx>
#include <scerrors.hxx>
#include <dbdata.hxx>
#include <markdata.hxx>
#include <undodat.hxx>
#include <progress.hxx>
#include <patattr.hxx>
#include <docpool.hxx>
#include <attrib.hxx>
#include <dbdocutl.hxx>
#include <editable.hxx>
#include <hints.hxx>
#include <miscuno.hxx>
#include <chgtrack.hxx>
#include <refupdatecontext.hxx>
using namespace com::sun::star;
constexpr OUStringLiteral SC_SERVICE_ROWSET = u"com.sun.star.sdb.RowSet";
//! move to a header file?
constexpr OUStringLiteral SC_DBPROP_DATASOURCENAME = u"DataSourceName";
constexpr OUStringLiteral SC_DBPROP_COMMAND = u"Command";
constexpr OUStringLiteral SC_DBPROP_COMMANDTYPE = u"CommandType";
void ScDBDocFunc::ShowInBeamer( const ScImportParam& rParam, const SfxViewFrame* pFrame )
{
// called after opening the database beamer
if ( !pFrame || !rParam.bImport )
return;
uno::Reference<frame::XFrame> xFrame = pFrame->GetFrame().GetFrameInterface();
uno::Reference<frame::XFrame> xBeamerFrame = xFrame->findFrame(
u"_beamer"_ustr,
frame::FrameSearchFlag::CHILDREN);
if (!xBeamerFrame.is())
return;
uno::Reference<frame::XController> xController = xBeamerFrame->getController();
uno::Reference<view::XSelectionSupplier> xControllerSelection(xController, uno::UNO_QUERY);
if (xControllerSelection.is())
{
sal_Int32 nType = rParam.bSql ? sdb::CommandType::COMMAND :
( (rParam.nType == ScDbQuery) ? sdb::CommandType::QUERY :
sdb::CommandType::TABLE );
svx::ODataAccessDescriptor aSelection;
aSelection.setDataSource(rParam.aDBName);
aSelection[svx::DataAccessDescriptorProperty::Command] <<= rParam.aStatement;
aSelection[svx::DataAccessDescriptorProperty::CommandType] <<= nType;
xControllerSelection->select(uno::Any(aSelection.createPropertyValueSequence()));
}
else
{
OSL_FAIL("no selection supplier in the beamer!");
}
}
void ScDBDocFunc::DoImportUno( const ScAddress& rPos,
const uno::Sequence<beans::PropertyValue>& aArgs )
{
svx::ODataAccessDescriptor aDesc( aArgs ); // includes selection and result set
// create database range
ScDBData* pDBData = rDocShell.GetDBData( ScRange(rPos), SC_DB_IMPORT, ScGetDBSelection::Keep );
assert(pDBData && "can't create DB data");
OUString sTarget = pDBData->GetName();
UpdateImport( sTarget, aDesc );
}
bool ScDBDocFunc::DoImport( SCTAB nTab, const ScImportParam& rParam,
const svx::ODataAccessDescriptor* pDescriptor )
{
ScDocument& rDoc = rDocShell.GetDocument();
ScChangeTrack *pChangeTrack = nullptr;
ScRange aChangedRange;
bool bRecord = true;
if (!rDoc.IsUndoEnabled())
bRecord = false;
ScDBData* pDBData = rDoc.GetDBAtArea( nTab, rParam.nCol1, rParam.nRow1,
rParam.nCol2, rParam.nRow2 );
if (!pDBData)
{
OSL_FAIL( "DoImport: no DBData" );
return false;
}
std::unique_ptr<weld::WaitObject> xWaitWin(new weld::WaitObject(ScDocShell::GetActiveDialogParent()));
ScDocShellModificator aModificator( rDocShell );
bool bSuccess = false;
bool bTruncated = false; // for warning
TranslateId pErrStringId;
OUString aErrorMessage;
SCCOL nCol = rParam.nCol1;
SCROW nRow = rParam.nRow1;
SCCOL nEndCol = nCol; // end of resulting database area
SCROW nEndRow = nRow;
bool bDoSelection = false;
bool bRealSelection = false; // sal_True if not everything is selected
bool bBookmarkSelection = false;
sal_Int32 nListPos = 0;
sal_Int32 nRowsRead = 0;
sal_Int32 nListCount = 0;
uno::Sequence<uno::Any> aSelection;
if ( pDescriptor && pDescriptor->has(svx::DataAccessDescriptorProperty::Selection) )
{
(*pDescriptor)[svx::DataAccessDescriptorProperty::Selection] >>= aSelection;
nListCount = aSelection.getLength();
if ( nListCount > 0 )
{
bDoSelection = true;
if ( pDescriptor->has(svx::DataAccessDescriptorProperty::BookmarkSelection) )
bBookmarkSelection = ScUnoHelpFunctions::GetBoolFromAny( (*pDescriptor)[svx::DataAccessDescriptorProperty::BookmarkSelection] );
if ( bBookmarkSelection )
{
// From bookmarks, there's no way to detect if all records are selected.
// Rely on base to pass no selection in that case.
bRealSelection = true;
}
}
}
uno::Reference<sdbc::XResultSet> xResultSet;
if ( pDescriptor && pDescriptor->has(svx::DataAccessDescriptorProperty::Cursor) )
xResultSet.set((*pDescriptor)[svx::DataAccessDescriptorProperty::Cursor], uno::UNO_QUERY);
// ImportDoc - also used for Redo
ScDocumentUniquePtr pImportDoc(new ScDocument( SCDOCMODE_UNDO ));
pImportDoc->InitUndo( rDoc, nTab, nTab );
// get data from database into import document
try
{
// progress bar
// only text (title is still needed, for the cancel button)
ScProgress aProgress( &rDocShell, ScResId(STR_UNDO_IMPORTDATA), 0, true );
uno::Reference<sdbc::XRowSet> xRowSet( xResultSet, uno::UNO_QUERY );
bool bDispose = false;
if ( !xRowSet.is() )
{
bDispose = true;
xRowSet.set(comphelper::getProcessServiceFactory()->createInstance(
SC_SERVICE_ROWSET ),
uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xRowProp( xRowSet, uno::UNO_QUERY );
OSL_ENSURE( xRowProp.is(), "can't get RowSet" );
if ( xRowProp.is() )
{
// set source parameters
sal_Int32 nType = rParam.bSql ? sdb::CommandType::COMMAND :
( (rParam.nType == ScDbQuery) ? sdb::CommandType::QUERY :
sdb::CommandType::TABLE );
xRowProp->setPropertyValue( SC_DBPROP_DATASOURCENAME, uno::Any(rParam.aDBName) );
xRowProp->setPropertyValue( SC_DBPROP_COMMAND, uno::Any(rParam.aStatement) );
xRowProp->setPropertyValue( SC_DBPROP_COMMANDTYPE, uno::Any(nType) );
uno::Reference<sdb::XCompletedExecution> xExecute( xRowSet, uno::UNO_QUERY );
if ( xExecute.is() )
{
uno::Reference<task::XInteractionHandler> xHandler(
task::InteractionHandler::createWithParent(comphelper::getProcessComponentContext(), nullptr),
uno::UNO_QUERY_THROW);
xExecute->executeWithCompletion( xHandler );
}
else
xRowSet->execute();
}
}
if ( xRowSet.is() )
{
// get column descriptions
sal_Int32 nColCount = 0;
uno::Reference<sdbc::XResultSetMetaData> xMeta;
uno::Reference<sdbc::XResultSetMetaDataSupplier> xMetaSupp( xRowSet, uno::UNO_QUERY );
if ( xMetaSupp.is() )
xMeta = xMetaSupp->getMetaData();
if ( xMeta.is() )
nColCount = xMeta->getColumnCount(); // this is the number of real columns
if ( rParam.nCol1 + nColCount - 1 > rDoc.MaxCol() )
{
nColCount = 0;
//! error message
}
uno::Reference<sdbcx::XRowLocate> xLocate;
if ( bBookmarkSelection )
{
xLocate.set( xRowSet, uno::UNO_QUERY );
if ( !xLocate.is() )
{
SAL_WARN( "sc.ui","can't get XRowLocate");
bDoSelection = bRealSelection = bBookmarkSelection = false;
}
}
uno::Reference<sdbc::XRow> xRow( xRowSet, uno::UNO_QUERY );
if ( nColCount > 0 && xRow.is() )
{
nEndCol = static_cast<SCCOL>( rParam.nCol1 + nColCount - 1 );
uno::Sequence<sal_Int32> aColTypes( nColCount ); // column types
uno::Sequence<sal_Bool> aColCurr( nColCount ); // currency flag is not in types
sal_Int32* pTypeArr = aColTypes.getArray();
sal_Bool* pCurrArr = aColCurr.getArray();
for (tools::Long i=0; i<nColCount; i++)
{
pTypeArr[i] = xMeta->getColumnType( i+1 );
pCurrArr[i] = xMeta->isCurrency( i+1 );
}
// read column names
nCol = rParam.nCol1;
for (tools::Long i=0; i<nColCount; i++)
{
pImportDoc->SetString( nCol, nRow, nTab,
xMeta->getColumnLabel( i+1 ) );
++nCol;
}
++nRow;
bool bEnd = false;
if ( !bDoSelection )
xRowSet->beforeFirst();
sal_uInt16 nInserted = 0;
while ( !bEnd )
{
// skip rows that are not selected
if ( !bDoSelection )
{
bEnd = !xRowSet->next();
if ( !bEnd )
++nRowsRead;
}
else
{
if (nListPos < nListCount)
{
if ( bBookmarkSelection )
{
bEnd = !xLocate->moveToBookmark(aSelection[nListPos]);
}
else // use record numbers
{
sal_Int32 nNextRow = 0;
aSelection[nListPos] >>= nNextRow;
if ( nRowsRead+1 < nNextRow )
bRealSelection = true;
nRowsRead = nNextRow;
bEnd = !xRowSet->absolute(nRowsRead);
}
++nListPos;
}
else
{
if ( !bBookmarkSelection && xRowSet->next() )
bRealSelection = true; // more data available but not used
bEnd = true;
}
}
if ( !bEnd )
{
if ( rDoc.ValidRow(nRow) )
{
nCol = rParam.nCol1;
for (tools::Long i=0; i<nColCount; i++)
{
ScDatabaseDocUtil::PutData( *pImportDoc, nCol, nRow, nTab,
xRow, i+1, pTypeArr[i], pCurrArr[i] );
++nCol;
}
nEndRow = nRow;
++nRow;
// progress bar
++nInserted;
if (!(nInserted & 15))
{
aProgress.SetState( 0 );
}
}
else // past the end of the spreadsheet
{
bEnd = true; // don't continue
bTruncated = true; // warning flag
}
}
}
bSuccess = true;
}
if ( bDispose )
::comphelper::disposeComponent( xRowSet );
}
}
catch ( const sdbc::SQLException& rError )
{
aErrorMessage = rError.Message;
}
catch ( uno::Exception& )
{
TOOLS_WARN_EXCEPTION( "sc", "Unexpected exception in database");
}
// test for cell protection
bool bKeepFormat = pDBData->IsKeepFmt();
bool bMoveCells = pDBData->IsDoSize();
SCCOL nFormulaCols = 0; // columns to be filled with formulas
if (bMoveCells && nEndCol == rParam.nCol2)
{
// if column count changes, formulas would become invalid anyway
// -> only set nFormulaCols for unchanged column count
SCCOL nTestCol = rParam.nCol2 + 1; // right of the data
SCROW nTestRow = rParam.nRow1 + 1; // below the title row
while ( nTestCol <= rDoc.MaxCol() &&
rDoc.GetCellType(ScAddress( nTestCol, nTestRow, nTab )) == CELLTYPE_FORMULA )
{
++nTestCol;
++nFormulaCols;
}
}
if (bSuccess)
{
// old and new range editable?
ScEditableTester aTester;
aTester.TestBlock( rDoc, nTab, rParam.nCol1,rParam.nRow1,rParam.nCol2,rParam.nRow2 );
aTester.TestBlock( rDoc, nTab, rParam.nCol1,rParam.nRow1,nEndCol,nEndRow );
if ( !aTester.IsEditable() )
{
pErrStringId = aTester.GetMessageId();
bSuccess = false;
}
else if ( (pChangeTrack = rDoc.GetChangeTrack()) != nullptr )
aChangedRange = ScRange(rParam.nCol1, rParam.nRow1, nTab,
nEndCol+nFormulaCols, nEndRow, nTab );
}
if ( bSuccess && bMoveCells )
{
ScRange aOld( rParam.nCol1, rParam.nRow1, nTab,
rParam.nCol2+nFormulaCols, rParam.nRow2, nTab );
ScRange aNew( rParam.nCol1, rParam.nRow1, nTab,
nEndCol+nFormulaCols, nEndRow, nTab );
if (!rDoc.CanFitBlock( aOld, aNew ))
{
pErrStringId = STR_MSSG_DOSUBTOTALS_2; // can't insert cells
bSuccess = false;
}
}
// copy data from import doc into real document
if ( bSuccess )
{
if (bKeepFormat)
{
// keep formatting of title and first data row from the document
// CopyToDocument also copies styles, Apply... needs separate calls
SCCOL nMinEndCol = std::min( rParam.nCol2, nEndCol ); // not too much
nMinEndCol = sal::static_int_cast<SCCOL>( nMinEndCol + nFormulaCols ); // only if column count unchanged
pImportDoc->DeleteAreaTab( 0,0, rDoc.MaxCol(),rDoc.MaxRow(), nTab, InsertDeleteFlags::ATTRIB );
rDoc.CopyToDocument(rParam.nCol1, rParam.nRow1, nTab,
nMinEndCol, rParam.nRow1, nTab,
InsertDeleteFlags::ATTRIB, false, *pImportDoc);
SCROW nDataStartRow = rParam.nRow1+1;
for (SCCOL nCopyCol=rParam.nCol1; nCopyCol<=nMinEndCol; nCopyCol++)
{
const ScPatternAttr* pSrcPattern = rDoc.GetPattern(
nCopyCol, nDataStartRow, nTab );
pImportDoc->ApplyPatternAreaTab( nCopyCol, nDataStartRow, nCopyCol, nEndRow,
nTab, *pSrcPattern );
const ScStyleSheet* pStyle = pSrcPattern->GetStyleSheet();
if (pStyle)
pImportDoc->ApplyStyleAreaTab( nCopyCol, nDataStartRow, nCopyCol, nEndRow,
nTab, *pStyle );
}
}
// don't set cell protection attribute if table is protected
if (rDoc.IsTabProtected(nTab))
{
ScPatternAttr aPattern(pImportDoc->getCellAttributeHelper());
aPattern.GetItemSet().Put( ScProtectionAttr( false,false,false,false ) );
pImportDoc->ApplyPatternAreaTab( 0,0,rDoc.MaxCol(),rDoc.MaxRow(), nTab, aPattern );
}
// copy old data for undo
SCCOL nUndoEndCol = std::max( nEndCol, rParam.nCol2 ); // rParam = old end
SCROW nUndoEndRow = std::max( nEndRow, rParam.nRow2 );
ScDocumentUniquePtr pUndoDoc;
std::unique_ptr<ScDBData> pUndoDBData;
if ( bRecord )
{
pUndoDoc.reset(new ScDocument( SCDOCMODE_UNDO ));
pUndoDoc->InitUndo( rDoc, nTab, nTab );
pUndoDBData.reset(new ScDBData( *pDBData ));
}
ScMarkData aNewMark(rDoc.GetSheetLimits());
aNewMark.SelectOneTable( nTab );
if (bRecord)
{
// do not touch notes (ScUndoImportData does not support drawing undo)
InsertDeleteFlags nCopyFlags = InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE;
// nFormulaCols is set only if column count is unchanged
rDoc.CopyToDocument(rParam.nCol1, rParam.nRow1, nTab,
nEndCol+nFormulaCols, nEndRow, nTab,
nCopyFlags, false, *pUndoDoc);
if ( rParam.nCol2 > nEndCol )
rDoc.CopyToDocument(nEndCol+1, rParam.nRow1, nTab,
nUndoEndCol, nUndoEndRow, nTab,
nCopyFlags, false, *pUndoDoc);
if ( rParam.nRow2 > nEndRow )
rDoc.CopyToDocument(rParam.nCol1, nEndRow+1, nTab,
nUndoEndCol+nFormulaCols, nUndoEndRow, nTab,
nCopyFlags, false, *pUndoDoc);
}
// move new data
if (bMoveCells)
{
// clear only the range without the formulas,
// so the formula title and first row are preserved
ScRange aDelRange( rParam.nCol1, rParam.nRow1, nTab,
rParam.nCol2, rParam.nRow2, nTab );
rDoc.DeleteAreaTab( aDelRange, InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE ); // without the formulas
ScRange aOld( rParam.nCol1, rParam.nRow1, nTab,
rParam.nCol2+nFormulaCols, rParam.nRow2, nTab );
ScRange aNew( rParam.nCol1, rParam.nRow1, nTab,
nEndCol+nFormulaCols, nEndRow, nTab );
rDoc.FitBlock( aOld, aNew, false ); // Do not delete formulas
}
else if ( nEndCol < rParam.nCol2 ) // DeleteArea calls PutInOrder
rDoc.DeleteArea( nEndCol+1, rParam.nRow1, rParam.nCol2, rParam.nRow2,
aNewMark, InsertDeleteFlags::CONTENTS & ~InsertDeleteFlags::NOTE );
// CopyToDocument doesn't remove contents
rDoc.DeleteAreaTab( rParam.nCol1, rParam.nRow1, nEndCol, nEndRow, nTab, InsertDeleteFlags::CONTENTS & ~InsertDeleteFlags::NOTE );
// remove each column from ImportDoc after copying to reduce memory usage
bool bOldAutoCalc = rDoc.GetAutoCalc();
rDoc.SetAutoCalc( false ); // outside of the loop
for (SCCOL nCopyCol = rParam.nCol1; nCopyCol <= nEndCol; nCopyCol++)
{
pImportDoc->CopyToDocument(nCopyCol, rParam.nRow1, nTab, nCopyCol, nEndRow, nTab,
InsertDeleteFlags::ALL, false, rDoc);
pImportDoc->DeleteAreaTab( nCopyCol, rParam.nRow1, nCopyCol, nEndRow, nTab, InsertDeleteFlags::CONTENTS );
}
rDoc.SetAutoCalc( bOldAutoCalc );
if (nFormulaCols > 0) // copy formulas
{
if (bKeepFormat) // formats for formulas
pImportDoc->CopyToDocument(nEndCol+1, rParam.nRow1, nTab,
nEndCol+nFormulaCols, nEndRow, nTab,
InsertDeleteFlags::ATTRIB, false, rDoc);
// fill formulas
ScMarkData aMark(rDoc.GetSheetLimits());
aMark.SelectOneTable(nTab);
sal_uLong nProgCount = nFormulaCols;
nProgCount *= nEndRow-rParam.nRow1-1;
ScProgress aProgress( rDoc.GetDocumentShell(),
ScResId(STR_FILL_SERIES_PROGRESS), nProgCount, true );
rDoc.Fill( nEndCol+1, rParam.nRow1+1, nEndCol+nFormulaCols, rParam.nRow1+1,
&aProgress, aMark, nEndRow-rParam.nRow1-1, FILL_TO_BOTTOM, FILL_SIMPLE );
}
// if new range is smaller, clear old contents
if (!bMoveCells) // move has happened above
{
if ( rParam.nCol2 > nEndCol )
rDoc.DeleteArea( nEndCol+1, rParam.nRow1, rParam.nCol2, rParam.nRow2,
aNewMark, InsertDeleteFlags::CONTENTS );
if ( rParam.nRow2 > nEndRow )
rDoc.DeleteArea( rParam.nCol1, nEndRow+1, rParam.nCol2, rParam.nRow2,
aNewMark, InsertDeleteFlags::CONTENTS );
}
// update database range
pDBData->SetImportParam( rParam );
pDBData->SetHeader( true );
pDBData->SetByRow( true );
pDBData->SetArea( nTab, rParam.nCol1,rParam.nRow1, nEndCol,nEndRow );
pDBData->SetImportSelection( bRealSelection );
rDoc.CompileDBFormula();
if (bRecord)
{
ScDocumentUniquePtr pRedoDoc = std::move(pImportDoc);
if (nFormulaCols > 0) // include filled formulas for redo
rDoc.CopyToDocument(rParam.nCol1, rParam.nRow1, nTab,
nEndCol+nFormulaCols, nEndRow, nTab,
InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE, false, *pRedoDoc);
std::unique_ptr<ScDBData> pRedoDBData(new ScDBData(*pDBData));
rDocShell.GetUndoManager()->AddUndoAction(
std::make_unique<ScUndoImportData>( &rDocShell, nTab,
rParam, nUndoEndCol, nUndoEndRow,
nFormulaCols,
std::move(pUndoDoc), std::move(pRedoDoc),
std::move(pUndoDBData), std::move(pRedoDBData) ) );
}
sc::SetFormulaDirtyContext aCxt;
rDoc.SetAllFormulasDirty(aCxt);
rDocShell.PostPaint(ScRange(0, 0, nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab), PaintPartFlags::Grid);
aModificator.SetDocumentModified();
ScDBRangeRefreshedHint aHint( rParam );
rDoc.BroadcastUno( aHint );
xWaitWin.reset();
if ( bTruncated ) // show warning
ErrorHandler::HandleError(SCWARN_IMPORT_RANGE_OVERFLOW);
}
else
{
xWaitWin.reset();
if (aErrorMessage.isEmpty())
{
if (!pErrStringId)
pErrStringId = STR_MSSG_IMPORTDATA_0;
aErrorMessage = ScResId(pErrStringId);
}
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(ScDocShell::GetActiveDialogParent(),
VclMessageType::Info, VclButtonsType::Ok,
aErrorMessage));
xInfoBox->run();
}
pImportDoc.reset();
if (bSuccess && pChangeTrack)
pChangeTrack->AppendInsert ( aChangedRange );
return bSuccess;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1048 The 'nCol' variable was assigned the same value.