/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <dbfunc.hxx>
#include <scitems.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld.hxx>
#include <svl/numformat.hxx>
#include <svl/zforlist.hxx>
#include <sfx2/app.hxx>
#include <unotools/collatorwrapper.hxx>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/container/XNameAccess.hpp>
#include <com/sun/star/sheet/DataPilotFieldFilter.hpp>
#include <com/sun/star/sheet/DataPilotFieldGroupBy.hpp>
#include <com/sun/star/sheet/DataPilotFieldOrientation.hpp>
#include <com/sun/star/sheet/DataPilotFieldSortMode.hpp>
#include <com/sun/star/sheet/DataPilotTableHeaderData.hpp>
#include <com/sun/star/sheet/MemberResultFlags.hpp>
#include <com/sun/star/sheet/XDimensionsSupplier.hpp>
#include <com/sun/star/sheet/XDrillDownDataSupplier.hpp>
#include <global.hxx>
#include <scresid.hxx>
#include <globstr.hrc>
#include <undotab.hxx>
#include <undodat.hxx>
#include <dbdata.hxx>
#include <rangenam.hxx>
#include <docsh.hxx>
#include <olinetab.hxx>
#include <olinefun.hxx>
#include <dpobject.hxx>
#include <dpsave.hxx>
#include <dpdimsave.hxx>
#include <dbdocfun.hxx>
#include <dpoutput.hxx>
#include <editable.hxx>
#include <patattr.hxx>
#include <unonames.hxx>
#include <userlist.hxx>
#include <queryentry.hxx>
#include <markdata.hxx>
#include <tabvwsh.hxx>
#include <generalfunction.hxx>
#include <sortparam.hxx>
#include <comphelper/lok.hxx>
#include <osl/diagnose.h>
#include <memory>
#include <string_view>
#include <unordered_set>
#include <unordered_map>
#include <vector>
#include <algorithm>
using namespace com::sun::star;
using ::com::sun::star::uno::Any;
using ::com::sun::star::uno::Sequence;
using ::com::sun::star::uno::Reference;
using ::com::sun::star::uno::UNO_QUERY;
using ::com::sun::star::beans::XPropertySet;
using ::com::sun::star::container::XNameAccess;
using ::com::sun::star::sheet::XDimensionsSupplier;
using ::std::vector;
// outliner
// create outline grouping
void ScDBFunc::MakeOutline( bool bColumns, bool bRecord )
{
ScRange aRange;
if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE)
{
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
aFunc.MakeOutline( aRange, bColumns, bRecord, false );
ScTabViewShell::notifyAllViewsHeaderInvalidation(GetViewData().GetViewShell(), bColumns ? COLUMN_HEADER : ROW_HEADER, GetViewData().GetTabNo());
ScTabViewShell::notifyAllViewsSheetGeomInvalidation(GetViewData().GetViewShell(),
bColumns, !bColumns, false /* bSizes*/,
false /* bHidden */, false /* bFiltered */,
true /* bGroups */, GetViewData().GetTabNo());
}
else
ErrorMessage(STR_NOMULTISELECT);
}
// delete outline grouping
void ScDBFunc::RemoveOutline( bool bColumns, bool bRecord )
{
ScRange aRange;
if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE)
{
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
aFunc.RemoveOutline( aRange, bColumns, bRecord, false );
ScTabViewShell::notifyAllViewsHeaderInvalidation(GetViewData().GetViewShell(), bColumns ? COLUMN_HEADER : ROW_HEADER, GetViewData().GetTabNo());
ScTabViewShell::notifyAllViewsSheetGeomInvalidation(GetViewData().GetViewShell(),
bColumns, !bColumns, false /* bSizes*/,
true /* bHidden */, true /* bFiltered */,
true /* bGroups */, GetViewData().GetTabNo());
}
else
ErrorMessage(STR_NOMULTISELECT);
}
// menu status: delete outlines
void ScDBFunc::TestRemoveOutline( bool& rCol, bool& rRow )
{
bool bColFound = false;
bool bRowFound = false;
SCCOL nStartCol, nEndCol;
SCROW nStartRow, nEndRow;
SCTAB nStartTab, nEndTab;
if (GetViewData().GetSimpleArea(nStartCol,nStartRow,nStartTab,nEndCol,nEndRow,nEndTab) == SC_MARK_SIMPLE)
{
SCTAB nTab = nStartTab;
ScDocument& rDoc = GetViewData().GetDocument();
ScOutlineTable* pTable = rDoc.GetOutlineTable( nTab );
if (pTable)
{
ScOutlineEntry* pEntry;
SCCOLROW nStart;
SCCOLROW nEnd;
bool bColMarked = ( nStartRow == 0 && nEndRow == rDoc.MaxRow() );
bool bRowMarked = ( nStartCol == 0 && nEndCol == rDoc.MaxCol() );
// columns
if ( !bRowMarked || bColMarked ) // not when entire rows are marked
{
ScOutlineArray& rArray = pTable->GetColArray();
ScSubOutlineIterator aColIter( &rArray );
while (!bColFound)
{
pEntry=aColIter.GetNext();
if (!pEntry)
break;
nStart = pEntry->GetStart();
nEnd = pEntry->GetEnd();
if ( nStartCol<=static_cast<SCCOL>(nEnd) && nEndCol>=static_cast<SCCOL>(nStart) )
bColFound = true;
}
}
// rows
if ( !bColMarked || bRowMarked ) // not when entire columns are marked
{
ScOutlineArray& rArray = pTable->GetRowArray();
ScSubOutlineIterator aRowIter( &rArray );
while (!bRowFound)
{
pEntry=aRowIter.GetNext();
if (!pEntry)
break;
nStart = pEntry->GetStart();
nEnd = pEntry->GetEnd();
if ( nStartRow<=nEnd && nEndRow>=nStart )
bRowFound = true;
}
}
}
}
rCol = bColFound;
rRow = bRowFound;
}
void ScDBFunc::RemoveAllOutlines( bool bRecord )
{
SCTAB nTab = GetViewData().GetTabNo();
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
bool bOk = aFunc.RemoveAllOutlines( nTab, bRecord );
if (bOk)
{
ScTabViewShell::notifyAllViewsSheetGeomInvalidation(GetViewData().GetViewShell(),
true /* bColumns */, true /* bRows */, false /* bSizes*/,
true /* bHidden */, true /* bFiltered */,
true /* bGroups */, nTab);
UpdateScrollBars(BOTH_HEADERS);
}
}
// auto outlines
void ScDBFunc::AutoOutline( )
{
ScDocument& rDoc = GetViewData().GetDocument();
SCTAB nTab = GetViewData().GetTabNo();
ScRange aRange( 0,0,nTab, rDoc.MaxCol(),rDoc.MaxRow(),nTab ); // the complete sheet, if nothing is marked
ScMarkData& rMark = GetViewData().GetMarkData();
if ( rMark.IsMarked() || rMark.IsMultiMarked() )
{
rMark.MarkToMulti();
aRange = rMark.GetMultiMarkArea();
}
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
aFunc.AutoOutline( aRange, true );
}
// select outline level
void ScDBFunc::SelectLevel( bool bColumns, sal_uInt16 nLevel, bool bRecord )
{
SCTAB nTab = GetViewData().GetTabNo();
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
bool bOk = aFunc.SelectLevel( nTab, bColumns, nLevel, bRecord, true/*bPaint*/ );
if (bOk)
{
ScTabViewShell::notifyAllViewsSheetGeomInvalidation(GetViewData().GetViewShell(),
bColumns, !bColumns, false /* bSizes*/,
true /* bHidden */, true /* bFiltered */,
true /* bGroups */, nTab);
UpdateScrollBars(bColumns ? COLUMN_HEADER : ROW_HEADER);
}
}
// show individual outline groups
void ScDBFunc::SetOutlineState( bool bColumns, sal_uInt16 nLevel, sal_uInt16 nEntry, bool bHidden)
{
const sal_uInt16 nHeadEntry = static_cast< sal_uInt16 >( -1 );
if ( nEntry == nHeadEntry)
SelectLevel( bColumns, sal::static_int_cast<sal_uInt16>(nLevel) );
else
{
if ( !bHidden )
ShowOutline( bColumns, sal::static_int_cast<sal_uInt16>(nLevel), sal::static_int_cast<sal_uInt16>(nEntry) );
else
HideOutline( bColumns, sal::static_int_cast<sal_uInt16>(nLevel), sal::static_int_cast<sal_uInt16>(nEntry) );
}
}
void ScDBFunc::ShowOutline( bool bColumns, sal_uInt16 nLevel, sal_uInt16 nEntry, bool bRecord, bool bPaint )
{
SCTAB nTab = GetViewData().GetTabNo();
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
aFunc.ShowOutline( nTab, bColumns, nLevel, nEntry, bRecord, bPaint );
if ( bPaint )
{
ScTabViewShell::notifyAllViewsSheetGeomInvalidation(GetViewData().GetViewShell(),
bColumns, !bColumns, false /* bSizes*/,
true /* bHidden */, true /* bFiltered */,
true /* bGroups */, nTab);
UpdateScrollBars(bColumns ? COLUMN_HEADER : ROW_HEADER);
}
}
// hide individual outline groups
void ScDBFunc::HideOutline( bool bColumns, sal_uInt16 nLevel, sal_uInt16 nEntry, bool bRecord, bool bPaint )
{
SCTAB nTab = GetViewData().GetTabNo();
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
bool bOk = aFunc.HideOutline( nTab, bColumns, nLevel, nEntry, bRecord, bPaint );
if ( bOk && bPaint )
{
ScTabViewShell::notifyAllViewsSheetGeomInvalidation(GetViewData().GetViewShell(),
bColumns, !bColumns, false /* bSizes*/,
true /* bHidden */, true /* bFiltered */,
true /* bGroups */, nTab);
UpdateScrollBars(bColumns ? COLUMN_HEADER : ROW_HEADER);
}
}
// menu status: show/hide marked range
bool ScDBFunc::OutlinePossible(bool bHide)
{
bool bEnable = false;
SCCOL nStartCol;
SCROW nStartRow;
SCTAB nStartTab;
SCCOL nEndCol;
SCROW nEndRow;
SCTAB nEndTab;
if (GetViewData().GetSimpleArea(nStartCol,nStartRow,nStartTab,nEndCol,nEndRow,nEndTab) == SC_MARK_SIMPLE)
{
ScDocument& rDoc = GetViewData().GetDocument();
SCTAB nTab = GetViewData().GetTabNo();
ScOutlineTable* pTable = rDoc.GetOutlineTable( nTab );
if (pTable)
{
SCCOLROW nStart;
SCCOLROW nEnd;
// columns
ScOutlineArray& rColArray = pTable->GetColArray();
ScSubOutlineIterator aColIter( &rColArray );
while (!bEnable)
{
ScOutlineEntry* pEntry = aColIter.GetNext();
if (!pEntry)
break;
nStart = pEntry->GetStart();
nEnd = pEntry->GetEnd();
if ( bHide )
{
if ( nStartCol<=static_cast<SCCOL>(nEnd) && nEndCol>=static_cast<SCCOL>(nStart) )
if (!pEntry->IsHidden())
bEnable = true;
}
else
{
if ( nStart>=nStartCol && nEnd<=nEndCol )
if (pEntry->IsHidden())
bEnable = true;
}
}
// rows
ScOutlineArray& rRowArray = pTable->GetRowArray();
ScSubOutlineIterator aRowIter( &rRowArray );
for (;;)
{
ScOutlineEntry* pEntry = aRowIter.GetNext();
if (!pEntry)
break;
nStart = pEntry->GetStart();
nEnd = pEntry->GetEnd();
if ( bHide )
{
if ( nStartRow<=nEnd && nEndRow>=nStart )
if (!pEntry->IsHidden())
bEnable = true;
}
else
{
if ( nStart>=nStartRow && nEnd<=nEndRow )
if (pEntry->IsHidden())
bEnable = true;
}
}
}
}
return bEnable;
}
// show marked range
void ScDBFunc::ShowMarkedOutlines( bool bRecord )
{
ScRange aRange;
if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE)
{
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
bool bDone = aFunc.ShowMarkedOutlines( aRange, bRecord );
if (bDone)
{
ScTabViewShell::notifyAllViewsSheetGeomInvalidation(
GetViewData().GetViewShell(), true, true,
false /* bSizes*/, true /* bHidden */, true /* bFiltered */,
true /* bGroups */, GetViewData().GetTabNo());
UpdateScrollBars();
}
}
else
ErrorMessage(STR_NOMULTISELECT);
}
// hide marked range
void ScDBFunc::HideMarkedOutlines( bool bRecord )
{
ScRange aRange;
if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE)
{
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScOutlineDocFunc aFunc(*pDocSh);
bool bDone = aFunc.HideMarkedOutlines( aRange, bRecord );
if (bDone)
{
ScTabViewShell::notifyAllViewsSheetGeomInvalidation(
GetViewData().GetViewShell(), true, true,
false /* bSizes*/, true /* bHidden */, true /* bFiltered */,
true /* bGroups */, GetViewData().GetTabNo());
UpdateScrollBars();
}
}
else
ErrorMessage(STR_NOMULTISELECT);
}
// sub totals
void ScDBFunc::DoSubTotals( const ScSubTotalParam& rParam, bool bRecord,
const ScSortParam* pForceNewSort )
{
bool bDo = !rParam.bRemoveOnly; // sal_False = only delete
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScDocument& rDoc = pDocSh->GetDocument();
ScMarkData& rMark = GetViewData().GetMarkData();
SCTAB nTab = GetViewData().GetTabNo();
if (bRecord && !rDoc.IsUndoEnabled())
bRecord = false;
ScDBData* pDBData = rDoc.GetDBAtArea( nTab, rParam.nCol1, rParam.nRow1,
rParam.nCol2, rParam.nRow2 );
if (!pDBData)
{
OSL_FAIL( "SubTotals: no DBData" );
return;
}
ScEditableTester aTester( rDoc, nTab, 0,rParam.nRow1+1, rDoc.MaxCol(),rDoc.MaxRow() );
if (!aTester.IsEditable())
{
ErrorMessage(aTester.GetMessageId());
return;
}
if (rDoc.HasAttrib( rParam.nCol1, rParam.nRow1+1, nTab,
rParam.nCol2, rParam.nRow2, nTab, HasAttrFlags::Merged | HasAttrFlags::Overlapped ))
{
ErrorMessage(STR_MSSG_INSERTCELLS_0); // do not insert into merged
return;
}
weld::WaitObject aWait(GetViewData().GetDialogParent());
bool bOk = true;
if (rParam.bReplace)
{
if (rDoc.TestRemoveSubTotals( nTab, rParam ))
{
std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(GetViewData().GetDialogParent(),
VclMessageType::Question, VclButtonsType::YesNo,
ScResId(STR_MSSG_DOSUBTOTALS_1))); // "delete data?"
xBox->set_title(ScResId(STR_MSSG_DOSUBTOTALS_0)); // "StarCalc"
xBox->set_default_response(RET_YES);
bOk = xBox->run() == RET_YES;
}
}
if (!bOk)
return;
ScDocShellModificator aModificator( *pDocSh );
ScSubTotalParam aNewParam( rParam ); // change end of range
ScDocumentUniquePtr pUndoDoc;
std::unique_ptr<ScOutlineTable> pUndoTab;
std::unique_ptr<ScRangeName> pUndoRange;
std::unique_ptr<ScDBCollection> pUndoDB;
if (bRecord) // record old data
{
bool bOldFilter = bDo && rParam.bDoSort;
SCTAB nTabCount = rDoc.GetTableCount();
pUndoDoc.reset(new ScDocument( SCDOCMODE_UNDO ));
ScOutlineTable* pTable = rDoc.GetOutlineTable( nTab );
if (pTable)
{
pUndoTab.reset(new ScOutlineTable( *pTable ));
SCCOLROW nOutStartCol; // row/column status
SCCOLROW nOutStartRow;
SCCOLROW nOutEndCol;
SCCOLROW nOutEndRow;
pTable->GetColArray().GetRange( nOutStartCol, nOutEndCol );
pTable->GetRowArray().GetRange( nOutStartRow, nOutEndRow );
pUndoDoc->InitUndo( rDoc, nTab, nTab, true, true );
rDoc.CopyToDocument( static_cast<SCCOL>(nOutStartCol), 0, nTab, static_cast<SCCOL>(nOutEndCol), rDoc.MaxRow(), nTab, InsertDeleteFlags::NONE, false, *pUndoDoc );
rDoc.CopyToDocument( 0, nOutStartRow, nTab, rDoc.MaxCol(), nOutEndRow, nTab, InsertDeleteFlags::NONE, false, *pUndoDoc );
}
else
pUndoDoc->InitUndo( rDoc, nTab, nTab, false, bOldFilter );
// record data range - including filter results
rDoc.CopyToDocument( 0,rParam.nRow1+1,nTab, rDoc.MaxCol(),rParam.nRow2,nTab,
InsertDeleteFlags::ALL, false, *pUndoDoc );
// all formulas for reference
rDoc.CopyToDocument( 0,0,0, rDoc.MaxCol(),rDoc.MaxRow(),nTabCount-1,
InsertDeleteFlags::FORMULA, false, *pUndoDoc );
// database and other ranges
ScRangeName* pDocRange = rDoc.GetRangeName();
if (!pDocRange->empty())
pUndoRange.reset(new ScRangeName( *pDocRange ));
ScDBCollection* pDocDB = rDoc.GetDBCollection();
if (!pDocDB->empty())
pUndoDB.reset(new ScDBCollection( *pDocDB ));
}
ScOutlineTable* pOut = rDoc.GetOutlineTable( nTab );
if (pOut)
{
// Remove all existing outlines in the specified range.
ScOutlineArray& rRowArray = pOut->GetRowArray();
sal_uInt16 nDepth = rRowArray.GetDepth();
for (sal_uInt16 i = 0; i < nDepth; ++i)
{
bool bSize;
rRowArray.Remove(aNewParam.nRow1, aNewParam.nRow2, bSize);
}
}
if (rParam.bReplace)
rDoc.RemoveSubTotals( nTab, aNewParam );
bool bSuccess = true;
if (bDo)
{
// Sort
if ( rParam.bDoSort || pForceNewSort )
{
pDBData->SetArea( nTab, aNewParam.nCol1,aNewParam.nRow1, aNewParam.nCol2,aNewParam.nRow2 );
// set subtotal fields before sorting
// (duplicate values are dropped, so that they can be called again)
ScSortParam aOldSort;
pDBData->GetSortParam( aOldSort );
ScSortParam aSortParam( aNewParam, pForceNewSort ? *pForceNewSort : aOldSort );
Sort( aSortParam, false, false );
}
bSuccess = rDoc.DoSubTotals( nTab, aNewParam );
}
ScRange aDirtyRange( aNewParam.nCol1, aNewParam.nRow1, nTab,
aNewParam.nCol2, aNewParam.nRow2, nTab );
rDoc.SetDirty( aDirtyRange, true );
if (bRecord)
{
pDocSh->GetUndoManager()->AddUndoAction(
std::make_unique<ScUndoSubTotals>( pDocSh, nTab,
rParam, aNewParam.nRow2,
std::move(pUndoDoc), std::move(pUndoTab), // pUndoDBData,
std::move(pUndoRange), std::move(pUndoDB) ) );
}
if (!bSuccess)
{
// "Can not insert any rows"
ErrorMessage(STR_MSSG_DOSUBTOTALS_2);
}
// store
pDBData->SetSubTotalParam( aNewParam );
pDBData->SetArea( nTab, aNewParam.nCol1,aNewParam.nRow1, aNewParam.nCol2,aNewParam.nRow2 );
rDoc.CompileDBFormula();
const ScRange aMarkRange( aNewParam.nCol1, aNewParam.nRow1, nTab, aNewParam.nCol2, aNewParam.nRow2, nTab);
DoneBlockMode();
InitOwnBlockMode( aMarkRange );
rMark.SetMarkArea( aMarkRange );
MarkDataChanged();
pDocSh->PostPaint(ScRange(0, 0, nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab),
PaintPartFlags::Grid | PaintPartFlags::Left | PaintPartFlags::Top | PaintPartFlags::Size);
aModificator.SetDocumentModified();
SelectionChanged();
}
// consolidate
void ScDBFunc::Consolidate( const ScConsolidateParam& rParam )
{
ScDocShell* pDocShell = GetViewData().GetDocShell();
pDocShell->DoConsolidate( rParam );
SetTabNo( rParam.nTab, true );
}
// pivot
static OUString lcl_MakePivotTabName( std::u16string_view rPrefix, SCTAB nNumber )
{
OUString aName = rPrefix + OUString::number( nNumber );
return aName;
}
bool ScDBFunc::MakePivotTable(
const ScDPSaveData& rData, const ScRange& rDest, bool bNewTable,
const ScDPObject& rSource )
{
// error message if no fields are set
// this must be removed when drag&drop of fields from a toolbox is available
if ( rData.IsEmpty() )
{
ErrorMessage(STR_PIVOT_NODATA);
return false;
}
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScDocument& rDoc = GetViewData().GetDocument();
bool bUndo = rDoc.IsUndoEnabled();
ScRange aDestRange = rDest;
if ( bNewTable )
{
SCTAB nSrcTab = GetViewData().GetTabNo();
OUString aName( ScResId(STR_PIVOT_TABLE) );
OUString aStr;
rDoc.GetName( nSrcTab, aStr );
aName += "_" + aStr + "_";
SCTAB nNewTab = nSrcTab+1;
SCTAB i=1;
while ( !rDoc.InsertTab( nNewTab, lcl_MakePivotTabName( aName, i ) ) && i <= MAXTAB )
i++;
bool bAppend = ( nNewTab+1 == rDoc.GetTableCount() );
if (bUndo)
{
pDocSh->GetUndoManager()->AddUndoAction(
std::make_unique<ScUndoInsertTab>( pDocSh, nNewTab, bAppend, lcl_MakePivotTabName( aName, i ) ));
}
GetViewData().InsertTab( nNewTab );
SetTabNo(nNewTab, true);
aDestRange = ScRange( 0, 0, nNewTab );
}
ScDPObject* pDPObj = rDoc.GetDPAtCursor(
aDestRange.aStart.Col(), aDestRange.aStart.Row(), aDestRange.aStart.Tab() );
ScDPObject aObj( rSource );
aObj.SetOutRange( aDestRange );
if ( pDPObj && !rData.GetExistingDimensionData() )
{
// copy dimension data from old object - lost in the dialog
//! change the dialog to keep the dimension data
ScDPSaveData aNewData( rData );
const ScDPSaveData* pOldData = pDPObj->GetSaveData();
if ( pOldData )
{
const ScDPDimensionSaveData* pDimSave = pOldData->GetExistingDimensionData();
aNewData.SetDimensionData( pDimSave );
}
aObj.SetSaveData( aNewData );
}
else
aObj.SetSaveData( rData );
bool bAllowMove = (pDPObj != nullptr); // allow re-positioning when editing existing table
ScDBDocFunc aFunc( *pDocSh );
bool bSuccess = aFunc.DataPilotUpdate(pDPObj, &aObj, true, false, bAllowMove);
CursorPosChanged(); // shells may be switched
if ( bNewTable )
{
pDocSh->PostPaintExtras();
SfxGetpApp()->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) );
}
return bSuccess;
}
void ScDBFunc::DeletePivotTable()
{
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScDocument& rDoc = pDocSh->GetDocument();
ScDPObject* pDPObj = rDoc.GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(),
GetViewData().GetTabNo() );
if ( pDPObj )
{
ScDBDocFunc aFunc( *pDocSh );
aFunc.RemovePivotTable(*pDPObj, true, false);
CursorPosChanged(); // shells may be switched
}
else
ErrorMessage(STR_PIVOT_NOTFOUND);
}
void ScDBFunc::RecalcPivotTable()
{
ScDocShell* pDocSh = GetViewData().GetDocShell();
ScDocument& rDoc = GetViewData().GetDocument();
ScDPObject* pDPObj = rDoc.GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(),
GetViewData().GetTabNo() );
if (pDPObj)
{
// Remove existing data cache for the data that this datapilot uses,
// to force re-build data cache.
ScDBDocFunc aFunc(*pDocSh);
aFunc.RefreshPivotTables(pDPObj, false);
CursorPosChanged(); // shells may be switched
}
else
ErrorMessage(STR_PIVOT_NOTFOUND);
}
void ScDBFunc::GetSelectedMemberList(ScDPUniqueStringSet& rEntries, tools::Long& rDimension)
{
ScDPObject* pDPObj = GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() );
if ( !pDPObj )
return;
tools::Long nStartDimension = -1;
tools::Long nStartHierarchy = -1;
tools::Long nStartLevel = -1;
ScRangeListRef xRanges;
GetViewData().GetMultiArea( xRanges ); // incl. cursor if nothing is selected
size_t nRangeCount = xRanges->size();
bool bContinue = true;
for (size_t nRangePos=0; nRangePos < nRangeCount && bContinue; nRangePos++)
{
ScRange const & rRange = (*xRanges)[nRangePos];
SCCOL nStartCol = rRange.aStart.Col();
SCROW nStartRow = rRange.aStart.Row();
SCCOL nEndCol = rRange.aEnd.Col();
SCROW nEndRow = rRange.aEnd.Row();
SCTAB nTab = rRange.aStart.Tab();
for (SCROW nRow=nStartRow; nRow<=nEndRow && bContinue; nRow++)
for (SCCOL nCol=nStartCol; nCol<=nEndCol && bContinue; nCol++)
{
sheet::DataPilotTableHeaderData aData;
pDPObj->GetHeaderPositionData(ScAddress(nCol, nRow, nTab), aData);
if ( aData.Dimension < 0 )
bContinue = false; // not part of any dimension
else
{
if ( nStartDimension < 0 ) // first member?
{
nStartDimension = aData.Dimension;
nStartHierarchy = aData.Hierarchy;
nStartLevel = aData.Level;
}
if ( aData.Dimension != nStartDimension ||
aData.Hierarchy != nStartHierarchy ||
aData.Level != nStartLevel )
{
bContinue = false; // cannot mix dimensions
}
}
if ( bContinue )
{
// accept any part of a member description, also subtotals,
// but don't stop if empty parts are contained
if ( aData.Flags & sheet::MemberResultFlags::HASMEMBER )
rEntries.insert(aData.MemberName);
}
}
}
rDimension = nStartDimension; // dimension from which the found members came
if (!bContinue)
rEntries.clear(); // remove all if not valid
}
bool ScDBFunc::HasSelectionForDateGroup( ScDPNumGroupInfo& rOldInfo, sal_Int32& rParts )
{
// determine if the date group dialog has to be shown for the current selection
bool bFound = false;
SCCOL nCurX = GetViewData().GetCurX();
SCROW nCurY = GetViewData().GetCurY();
SCTAB nTab = GetViewData().GetTabNo();
ScDocument& rDoc = GetViewData().GetDocument();
ScDPObject* pDPObj = rDoc.GetDPAtCursor( nCurX, nCurY, nTab );
if ( pDPObj )
{
ScDPUniqueStringSet aEntries;
tools::Long nSelectDimension = -1;
GetSelectedMemberList( aEntries, nSelectDimension );
if (!aEntries.empty())
{
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( nSelectDimension, bIsDataLayout );
OUString aBaseDimName( aDimName );
bool bInGroupDim = false;
bool bFoundParts = false;
ScDPDimensionSaveData* pDimData =
const_cast<ScDPDimensionSaveData*>( pDPObj->GetSaveData()->GetExistingDimensionData() );
if ( pDimData )
{
const ScDPSaveNumGroupDimension* pNumGroupDim = pDimData->GetNumGroupDim( aDimName );
const ScDPSaveGroupDimension* pGroupDim = pDimData->GetNamedGroupDim( aDimName );
if ( pNumGroupDim )
{
// existing num group dimension
if ( pNumGroupDim->GetDatePart() != 0 )
{
// dimension has date info -> edit settings of this dimension
// (parts are collected below)
rOldInfo = pNumGroupDim->GetDateInfo();
bFound = true;
}
else if ( pNumGroupDim->GetInfo().mbDateValues )
{
// Numerical grouping with DateValues flag is used for grouping
// of days with a "Number of days" value.
rOldInfo = pNumGroupDim->GetInfo();
rParts = css::sheet::DataPilotFieldGroupBy::DAYS; // not found in CollectDateParts
bFoundParts = true;
bFound = true;
}
bInGroupDim = true;
}
else if ( pGroupDim )
{
// existing additional group dimension
if ( pGroupDim->GetDatePart() != 0 )
{
// dimension has date info -> edit settings of this dimension
// (parts are collected below)
rOldInfo = pGroupDim->GetDateInfo();
aBaseDimName = pGroupDim->GetSourceDimName();
bFound = true;
}
bInGroupDim = true;
}
}
if ( bFound && !bFoundParts )
{
// collect date parts from all group dimensions
rParts = pDimData->CollectDateParts( aBaseDimName );
}
if ( !bFound && !bInGroupDim )
{
// create new date group dimensions if the selection is a single cell
// in a normal dimension with date content
ScRange aSelRange;
if ( (GetViewData().GetSimpleArea( aSelRange ) == SC_MARK_SIMPLE) &&
aSelRange.aStart == aSelRange.aEnd )
{
SCCOL nSelCol = aSelRange.aStart.Col();
SCROW nSelRow = aSelRange.aStart.Row();
SCTAB nSelTab = aSelRange.aStart.Tab();
if ( rDoc.HasValueData( nSelCol, nSelRow, nSelTab ) )
{
sal_uLong nIndex = rDoc.GetAttr(
nSelCol, nSelRow, nSelTab, ATTR_VALUE_FORMAT)->GetValue();
SvNumFormatType nType = rDoc.GetFormatTable()->GetType(nIndex);
if ( nType == SvNumFormatType::DATE || nType == SvNumFormatType::TIME || nType == SvNumFormatType::DATETIME )
{
bFound = true;
// use currently selected value for automatic limits
if( rOldInfo.mbAutoStart )
rOldInfo.mfStart = rDoc.GetValue( aSelRange.aStart );
if( rOldInfo.mbAutoEnd )
rOldInfo.mfEnd = rDoc.GetValue( aSelRange.aStart );
}
}
}
}
}
}
return bFound;
}
bool ScDBFunc::HasSelectionForNumGroup( ScDPNumGroupInfo& rOldInfo )
{
// determine if the numeric group dialog has to be shown for the current selection
bool bFound = false;
SCCOL nCurX = GetViewData().GetCurX();
SCROW nCurY = GetViewData().GetCurY();
SCTAB nTab = GetViewData().GetTabNo();
ScDocument& rDoc = GetViewData().GetDocument();
ScDPObject* pDPObj = rDoc.GetDPAtCursor( nCurX, nCurY, nTab );
if ( pDPObj )
{
ScDPUniqueStringSet aEntries;
tools::Long nSelectDimension = -1;
GetSelectedMemberList( aEntries, nSelectDimension );
if (!aEntries.empty())
{
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( nSelectDimension, bIsDataLayout );
bool bInGroupDim = false;
ScDPDimensionSaveData* pDimData =
const_cast<ScDPDimensionSaveData*>( pDPObj->GetSaveData()->GetExistingDimensionData() );
if ( pDimData )
{
const ScDPSaveNumGroupDimension* pNumGroupDim = pDimData->GetNumGroupDim( aDimName );
if ( pNumGroupDim )
{
// existing num group dimension
// -> edit settings of this dimension
rOldInfo = pNumGroupDim->GetInfo();
bFound = true;
}
else if ( pDimData->GetNamedGroupDim( aDimName ) )
bInGroupDim = true; // in a group dimension
}
if ( !bFound && !bInGroupDim )
{
// create a new num group dimension if the selection is a single cell
// in a normal dimension with numeric content
ScRange aSelRange;
if ( (GetViewData().GetSimpleArea( aSelRange ) == SC_MARK_SIMPLE) &&
aSelRange.aStart == aSelRange.aEnd )
{
if ( rDoc.HasValueData( aSelRange.aStart.Col(), aSelRange.aStart.Row(),
aSelRange.aStart.Tab() ) )
{
bFound = true;
// use currently selected value for automatic limits
if( rOldInfo.mbAutoStart )
rOldInfo.mfStart = rDoc.GetValue( aSelRange.aStart );
if( rOldInfo.mbAutoEnd )
rOldInfo.mfEnd = rDoc.GetValue( aSelRange.aStart );
}
}
}
}
}
return bFound;
}
void ScDBFunc::DateGroupDataPilot( const ScDPNumGroupInfo& rInfo, sal_Int32 nParts )
{
ScDPObject* pDPObj = GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() );
if (!pDPObj)
return;
ScDPUniqueStringSet aEntries;
tools::Long nSelectDimension = -1;
GetSelectedMemberList( aEntries, nSelectDimension );
if (aEntries.empty())
return;
std::vector<OUString> aDeletedNames;
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( nSelectDimension, bIsDataLayout );
ScDPSaveData aData( *pDPObj->GetSaveData() );
ScDPDimensionSaveData* pDimData = aData.GetDimensionData(); // created if not there
// find the source dimension name.
OUString aBaseDimName = aDimName;
if( const ScDPSaveGroupDimension* pBaseGroupDim = pDimData->GetNamedGroupDim( aDimName ) )
aBaseDimName = pBaseGroupDim->GetSourceDimName();
// Remove all group dimensions associated with this source dimension. For
// date grouping, we need to remove all existing groups for the affected
// source dimension and build new one(s) from scratch. Keep the deleted
// names so that they can be reused during re-construction.
aData.RemoveAllGroupDimensions(aBaseDimName, &aDeletedNames);
if ( nParts )
{
// create date group dimensions
bool bFirst = true;
sal_Int32 nMask = 1;
for (sal_uInt16 nBit=0; nBit<32; nBit++)
{
if ( nParts & nMask )
{
if ( bFirst )
{
// innermost part: create NumGroupDimension (replacing original values)
// Dimension name is left unchanged
if ( (nParts == sheet::DataPilotFieldGroupBy::DAYS) && (rInfo.mfStep >= 1.0) )
{
// only days, and a step value specified: use numerical grouping
// with DateValues flag, not date grouping
ScDPNumGroupInfo aNumInfo( rInfo );
aNumInfo.mbDateValues = true;
ScDPSaveNumGroupDimension aNumGroupDim( aBaseDimName, aNumInfo );
pDimData->AddNumGroupDimension( aNumGroupDim );
}
else
{
ScDPSaveNumGroupDimension aNumGroupDim( aBaseDimName, rInfo, nMask );
pDimData->AddNumGroupDimension( aNumGroupDim );
}
bFirst = false;
}
else
{
// additional parts: create GroupDimension (shown as additional dimensions)
OUString aGroupDimName =
pDimData->CreateDateGroupDimName(nMask, *pDPObj, true, &aDeletedNames);
ScDPSaveGroupDimension aGroupDim( aBaseDimName, aGroupDimName );
aGroupDim.SetDateInfo( rInfo, nMask );
pDimData->AddGroupDimension( aGroupDim );
// set orientation
ScDPSaveDimension* pSaveDimension = aData.GetDimensionByName( aGroupDimName );
if ( pSaveDimension->GetOrientation() == sheet::DataPilotFieldOrientation_HIDDEN )
{
ScDPSaveDimension* pOldDimension = aData.GetDimensionByName( aBaseDimName );
pSaveDimension->SetOrientation( pOldDimension->GetOrientation() );
aData.SetPosition( pSaveDimension, 0 ); //! before (immediate) base
}
}
}
nMask *= 2;
}
}
// apply changes
ScDBDocFunc aFunc( *GetViewData().GetDocShell() );
pDPObj->SetSaveData( aData );
aFunc.RefreshPivotTableGroups(pDPObj);
// unmark cell selection
Unmark();
}
void ScDBFunc::NumGroupDataPilot( const ScDPNumGroupInfo& rInfo )
{
ScDPObject* pDPObj = GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() );
if (!pDPObj)
return;
ScDPUniqueStringSet aEntries;
tools::Long nSelectDimension = -1;
GetSelectedMemberList( aEntries, nSelectDimension );
if (aEntries.empty())
return;
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( nSelectDimension, bIsDataLayout );
ScDPSaveData aData( *pDPObj->GetSaveData() );
ScDPDimensionSaveData* pDimData = aData.GetDimensionData(); // created if not there
ScDPSaveNumGroupDimension* pExisting = pDimData->GetNumGroupDimAcc( aDimName );
if ( pExisting )
{
// modify existing group dimension
pExisting->SetGroupInfo( rInfo );
}
else
{
// create new group dimension
ScDPSaveNumGroupDimension aNumGroupDim( aDimName, rInfo );
pDimData->AddNumGroupDimension( aNumGroupDim );
}
// apply changes
ScDBDocFunc aFunc( *GetViewData().GetDocShell() );
pDPObj->SetSaveData( aData );
aFunc.RefreshPivotTableGroups(pDPObj);
// unmark cell selection
Unmark();
}
void ScDBFunc::GroupDataPilot()
{
ScDPObject* pDPObj = GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() );
if (!pDPObj)
return;
ScDPUniqueStringSet aEntries;
tools::Long nSelectDimension = -1;
GetSelectedMemberList( aEntries, nSelectDimension );
if (aEntries.empty())
return;
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( nSelectDimension, bIsDataLayout );
ScDPSaveData aData( *pDPObj->GetSaveData() );
ScDPDimensionSaveData* pDimData = aData.GetDimensionData(); // created if not there
// find original base
OUString aBaseDimName = aDimName;
const ScDPSaveGroupDimension* pBaseGroupDim = pDimData->GetNamedGroupDim( aDimName );
if ( pBaseGroupDim )
{
// any entry's SourceDimName is the original base
aBaseDimName = pBaseGroupDim->GetSourceDimName();
}
// find existing group dimension
// (using the selected dim, can be intermediate group dim)
ScDPSaveGroupDimension* pGroupDimension = pDimData->GetGroupDimAccForBase( aDimName );
// remove the selected items from their groups
// (empty groups are removed, too)
if ( pGroupDimension )
{
for (const OUString& aEntryName : aEntries)
{
if ( pBaseGroupDim )
{
// for each selected (intermediate) group, remove all its items
// (same logic as for adding, below)
const ScDPSaveGroupItem* pBaseGroup = pBaseGroupDim->GetNamedGroup( aEntryName );
if ( pBaseGroup )
pBaseGroup->RemoveElementsFromGroups( *pGroupDimension ); // remove all elements
else
pGroupDimension->RemoveFromGroups( aEntryName );
}
else
pGroupDimension->RemoveFromGroups( aEntryName );
}
}
std::unique_ptr<ScDPSaveGroupDimension> pNewGroupDim;
if ( !pGroupDimension )
{
// create a new group dimension
OUString aGroupDimName =
pDimData->CreateGroupDimName(aBaseDimName, *pDPObj, false, nullptr);
pNewGroupDim.reset(new ScDPSaveGroupDimension( aBaseDimName, aGroupDimName ));
pGroupDimension = pNewGroupDim.get(); // make changes to the new dim if none existed
if ( pBaseGroupDim )
{
// If it's a higher-order group dimension, pre-allocate groups for all
// non-selected original groups, so the individual base members aren't
// used for automatic groups (this would make the original groups hard
// to find).
//! Also do this when removing groups?
//! Handle this case dynamically with automatic groups?
tools::Long nGroupCount = pBaseGroupDim->GetGroupCount();
for ( tools::Long nGroup = 0; nGroup < nGroupCount; nGroup++ )
{
const ScDPSaveGroupItem& rBaseGroup = pBaseGroupDim->GetGroupByIndex( nGroup );
if (!aEntries.count(rBaseGroup.GetGroupName()))
{
// add an additional group for each item that is not in the selection
ScDPSaveGroupItem aGroup( rBaseGroup.GetGroupName() );
aGroup.AddElementsFromGroup( rBaseGroup );
pGroupDimension->AddGroupItem( aGroup );
}
}
}
}
OUString aGroupDimName = pGroupDimension->GetGroupDimName();
ScDPSaveGroupItem aGroup(pGroupDimension->CreateGroupName(ScResId(STR_PIVOT_GROUP)));
for (const OUString& aEntryName : aEntries)
{
if ( pBaseGroupDim )
{
// for each selected (intermediate) group, add all its items
const ScDPSaveGroupItem* pBaseGroup = pBaseGroupDim->GetNamedGroup( aEntryName );
if ( pBaseGroup )
aGroup.AddElementsFromGroup( *pBaseGroup );
else
aGroup.AddElement( aEntryName ); // no group found -> automatic group, add the item itself
}
else
aGroup.AddElement( aEntryName ); // no group dimension, add all items directly
}
pGroupDimension->AddGroupItem( aGroup );
if ( pNewGroupDim )
{
pDimData->AddGroupDimension( *pNewGroupDim );
pNewGroupDim.reset(); // AddGroupDimension copies the object
// don't access pGroupDimension after here
}
pGroupDimension = nullptr;
// set orientation
ScDPSaveDimension* pSaveDimension = aData.GetDimensionByName( aGroupDimName );
if ( pSaveDimension->GetOrientation() == sheet::DataPilotFieldOrientation_HIDDEN )
{
ScDPSaveDimension* pOldDimension = aData.GetDimensionByName( aDimName );
pSaveDimension->SetOrientation( pOldDimension->GetOrientation() );
aData.SetPosition( pSaveDimension, 0 ); //! before (immediate) base
}
// apply changes
ScDBDocFunc aFunc( *GetViewData().GetDocShell() );
pDPObj->SetSaveData( aData );
aFunc.RefreshPivotTableGroups(pDPObj);
// unmark cell selection
Unmark();
}
void ScDBFunc::UngroupDataPilot()
{
ScDPObject* pDPObj = GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() );
if (!pDPObj)
return;
ScDPUniqueStringSet aEntries;
tools::Long nSelectDimension = -1;
GetSelectedMemberList( aEntries, nSelectDimension );
if (aEntries.empty())
return;
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( nSelectDimension, bIsDataLayout );
ScDPSaveData aData( *pDPObj->GetSaveData() );
if (!aData.GetExistingDimensionData())
// There is nothing to ungroup.
return;
ScDPDimensionSaveData* pDimData = aData.GetDimensionData();
ScDPSaveGroupDimension* pGroupDim = pDimData->GetNamedGroupDimAcc( aDimName );
const ScDPSaveNumGroupDimension* pNumGroupDim = pDimData->GetNumGroupDim( aDimName );
if ( ( pGroupDim && pGroupDim->GetDatePart() != 0 ) ||
( pNumGroupDim && pNumGroupDim->GetDatePart() != 0 ) )
{
// Date grouping: need to remove all affected group dimensions.
// This is done using DateGroupDataPilot with nParts=0.
DateGroupDataPilot( ScDPNumGroupInfo(), 0 );
return;
}
if ( pGroupDim )
{
for (const auto& rEntry : aEntries)
pGroupDim->RemoveGroup(rEntry);
// remove group dimension if empty
bool bEmptyDim = pGroupDim->IsEmpty();
if ( !bEmptyDim )
{
// If all remaining groups in the dimension aren't shown, remove
// the dimension too, as if it was completely empty.
ScDPUniqueStringSet aVisibleEntries;
pDPObj->GetMemberResultNames( aVisibleEntries, nSelectDimension );
bEmptyDim = pGroupDim->HasOnlyHidden( aVisibleEntries );
}
if ( bEmptyDim )
{
pDimData->RemoveGroupDimension( aDimName ); // pGroupDim is deleted
// also remove SaveData settings for the dimension that no longer exists
aData.RemoveDimensionByName( aDimName );
}
}
else if ( pNumGroupDim )
{
// remove the numerical grouping
pDimData->RemoveNumGroupDimension( aDimName );
// SaveData settings can remain unchanged - the same dimension still exists
}
// apply changes
ScDBDocFunc aFunc( *GetViewData().GetDocShell() );
pDPObj->SetSaveData( aData );
aFunc.RefreshPivotTableGroups(pDPObj);
// unmark cell selection
Unmark();
}
static OUString lcl_replaceMemberNameInSubtotal(const OUString& rSubtotal, std::u16string_view rMemberName)
{
sal_Int32 n = rSubtotal.getLength();
const sal_Unicode* p = rSubtotal.getStr();
OUStringBuffer aBuf, aWordBuf;
for (sal_Int32 i = 0; i < n; ++i)
{
sal_Unicode c = p[i];
if (c == ' ')
{
OUString aWord = aWordBuf.makeStringAndClear();
if (aWord == rMemberName)
aBuf.append('?');
else
aBuf.append(aWord);
aBuf.append(c);
}
else if (c == '\\')
{
// Escape a backslash character.
aWordBuf.append(OUStringChar(c) + OUStringChar(c));
}
else if (c == '?')
{
// A literal '?' must be escaped with a backslash ('\');
aWordBuf.append("\\" + OUStringChar(c));
}
else
aWordBuf.append(c);
}
if (!aWordBuf.isEmpty())
{
OUString aWord = aWordBuf.makeStringAndClear();
if (aWord == rMemberName)
aBuf.append('?');
else
aBuf.append(aWord);
}
return aBuf.makeStringAndClear();
}
void ScDBFunc::DataPilotInput( const ScAddress& rPos, const OUString& rString )
{
using namespace ::com::sun::star::sheet;
ScDocument& rDoc = GetViewData().GetDocument();
ScDPObject* pDPObj = rDoc.GetDPAtCursor( rPos.Col(), rPos.Row(), rPos.Tab() );
if (!pDPObj)
return;
OUString aOldText = rDoc.GetString(rPos.Col(), rPos.Row(), rPos.Tab());
if ( aOldText == rString )
{
// nothing to do: silently exit
return;
}
TranslateId pErrorId;
pDPObj->BuildAllDimensionMembers();
ScDPSaveData aData( *pDPObj->GetSaveData() );
bool bChange = false;
bool bNeedReloadGroups = false;
DataPilotFieldOrientation nOrient = DataPilotFieldOrientation_HIDDEN;
tools::Long nField = pDPObj->GetHeaderDim( rPos, nOrient );
if ( nField >= 0 )
{
// changing a field title
if ( aData.GetExistingDimensionData() )
{
// only group dimensions can be renamed
ScDPDimensionSaveData* pDimData = aData.GetDimensionData();
ScDPSaveGroupDimension* pGroupDim = pDimData->GetNamedGroupDimAcc( aOldText );
if ( pGroupDim )
{
// valid name: not empty, no existing dimension (group or other)
if (!rString.isEmpty() && !pDPObj->IsDimNameInUse(rString))
{
pGroupDim->Rename( rString );
// also rename in SaveData to preserve the field settings
ScDPSaveDimension* pSaveDim = aData.GetDimensionByName( aOldText );
pSaveDim->SetName( rString );
bChange = true;
}
else
pErrorId = STR_INVALIDNAME;
}
}
else if (nOrient == DataPilotFieldOrientation_COLUMN || nOrient == DataPilotFieldOrientation_ROW)
{
bool bDataLayout = false;
OUString aDimName = pDPObj->GetDimName(nField, bDataLayout);
ScDPSaveDimension* pDim = bDataLayout ? aData.GetDataLayoutDimension() : aData.GetDimensionByName(aDimName);
if (pDim)
{
if (!rString.isEmpty())
{
if (rString.equalsIgnoreAsciiCase(aDimName))
{
pDim->RemoveLayoutName();
bChange = true;
}
else if (!pDPObj->IsDimNameInUse(rString))
{
pDim->SetLayoutName(rString);
bChange = true;
}
else
pErrorId = STR_INVALIDNAME;
}
else
pErrorId = STR_INVALIDNAME;
}
}
}
else if (pDPObj->IsDataDescriptionCell(rPos))
{
// There is only one data dimension.
ScDPSaveDimension* pDim = aData.GetFirstDimension(sheet::DataPilotFieldOrientation_DATA);
if (pDim)
{
if (!rString.isEmpty())
{
if (pDim->GetName().equalsIgnoreAsciiCase(rString))
{
pDim->RemoveLayoutName();
bChange = true;
}
else if (!pDPObj->IsDimNameInUse(rString))
{
pDim->SetLayoutName(rString);
bChange = true;
}
else
pErrorId = STR_INVALIDNAME;
}
else
pErrorId = STR_INVALIDNAME;
}
}
else
{
// This is not a field header.
sheet::DataPilotTableHeaderData aPosData;
pDPObj->GetHeaderPositionData(rPos, aPosData);
if ((aPosData.Flags & MemberResultFlags::HASMEMBER) && !aOldText.isEmpty())
{
if ( aData.GetExistingDimensionData() && !(aPosData.Flags & MemberResultFlags::SUBTOTAL))
{
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( aPosData.Dimension, bIsDataLayout );
ScDPDimensionSaveData* pDimData = aData.GetDimensionData();
ScDPSaveGroupDimension* pGroupDim = pDimData->GetNamedGroupDimAcc( aDimName );
if ( pGroupDim )
{
// valid name: not empty, no existing group in this dimension
//! ignore case?
if (!rString.isEmpty() && !pGroupDim->GetNamedGroup(rString))
{
ScDPSaveGroupItem* pGroup = pGroupDim->GetNamedGroupAcc( aOldText );
if ( pGroup )
pGroup->Rename( rString ); // rename the existing group
else
{
// create a new group to replace the automatic group
ScDPSaveGroupItem aGroup( rString );
aGroup.AddElement( aOldText );
pGroupDim->AddGroupItem( aGroup );
}
// in both cases also adjust savedata, to preserve member settings (show details)
ScDPSaveDimension* pSaveDim = aData.GetDimensionByName( aDimName );
ScDPSaveMember* pSaveMember = pSaveDim->GetExistingMemberByName( aOldText );
if ( pSaveMember )
pSaveMember->SetName( rString );
bChange = true;
bNeedReloadGroups = true;
}
else
pErrorId = STR_INVALIDNAME;
}
}
else if (aPosData.Flags & MemberResultFlags::GRANDTOTAL)
{
aData.SetGrandTotalName(rString);
bChange = true;
}
else if (aPosData.Dimension >= 0 && !aPosData.MemberName.isEmpty())
{
bool bDataLayout = false;
OUString aDimName = pDPObj->GetDimName(static_cast<tools::Long>(aPosData.Dimension), bDataLayout);
if (bDataLayout)
{
// data dimension
do
{
if (aPosData.Flags & MemberResultFlags::SUBTOTAL)
break;
ScDPSaveDimension* pDim = aData.GetDimensionByName(aPosData.MemberName);
if (!pDim)
break;
if (rString.isEmpty())
{
pErrorId = STR_INVALIDNAME;
break;
}
if (aPosData.MemberName.equalsIgnoreAsciiCase(rString))
{
pDim->RemoveLayoutName();
bChange = true;
}
else if (!pDPObj->IsDimNameInUse(rString))
{
pDim->SetLayoutName(rString);
bChange = true;
}
else
pErrorId = STR_INVALIDNAME;
}
while (false);
}
else
{
// field member
do
{
ScDPSaveDimension* pDim = aData.GetDimensionByName(aDimName);
if (!pDim)
break;
ScDPSaveMember* pMem = pDim->GetExistingMemberByName(aPosData.MemberName);
if (!pMem)
break;
if (aPosData.Flags & MemberResultFlags::SUBTOTAL)
{
// Change subtotal only when the table has one data dimension.
if (aData.GetDataDimensionCount() > 1)
break;
// display name for subtotal is allowed only if the subtotal type is 'Automatic'.
if (pDim->GetSubTotalsCount() != 1)
break;
if (pDim->GetSubTotalFunc(0) != ScGeneralFunction::AUTO)
break;
const std::optional<OUString> & pLayoutName = pMem->GetLayoutName();
OUString aMemberName;
if (pLayoutName)
aMemberName = *pLayoutName;
else
aMemberName = aPosData.MemberName;
OUString aNew = lcl_replaceMemberNameInSubtotal(rString, aMemberName);
pDim->SetSubtotalName(aNew);
bChange = true;
}
else
{
// Check to make sure the member name isn't
// already used.
if (!rString.isEmpty())
{
if (rString.equalsIgnoreAsciiCase(pMem->GetName()))
{
pMem->RemoveLayoutName();
bChange = true;
}
else if (!pDim->IsMemberNameInUse(rString))
{
pMem->SetLayoutName(rString);
bChange = true;
}
else
pErrorId = STR_INVALIDNAME;
}
else
pErrorId = STR_INVALIDNAME;
}
}
while (false);
}
}
}
}
if ( bChange )
{
// apply changes
ScDBDocFunc aFunc( *GetViewData().GetDocShell() );
pDPObj->SetSaveData( aData );
if (bNeedReloadGroups)
{
ScDPCollection* pDPs = rDoc.GetDPCollection();
if (pDPs)
{
o3tl::sorted_vector<ScDPObject*> aRefs;
// tdf#111305: Reload groups in cache after modifications.
pDPs->ReloadGroupsInCache(pDPObj, aRefs);
} // pDPs
} // bNeedReloadGroups
aFunc.UpdatePivotTable(*pDPObj, true, false);
}
else
{
if (!pErrorId)
pErrorId = STR_ERR_DATAPILOT_INPUT;
ErrorMessage(pErrorId);
}
}
static void lcl_MoveToEnd( ScDPSaveDimension& rDim, const OUString& rItemName )
{
std::unique_ptr<ScDPSaveMember> pNewMember;
const ScDPSaveMember* pOldMember = rDim.GetExistingMemberByName( rItemName );
if ( pOldMember )
pNewMember.reset(new ScDPSaveMember( *pOldMember ));
else
pNewMember.reset(new ScDPSaveMember( rItemName ));
rDim.AddMember( std::move(pNewMember) );
// AddMember takes ownership of the new pointer,
// puts it to the end of the list even if it was in the list before.
}
namespace {
struct ScOUStringCollate
{
CollatorWrapper* mpCollator;
explicit ScOUStringCollate(CollatorWrapper* pColl) : mpCollator(pColl) {}
bool operator()(const OUString& rStr1, const OUString& rStr2) const
{
return ( mpCollator->compareString(rStr1, rStr2) < 0 );
}
};
}
void ScDBFunc::DataPilotSort(ScDPObject* pDPObj, tools::Long nDimIndex, bool bAscending, const sal_uInt16* pUserListId)
{
if (!pDPObj)
return;
// We need to run this to get all members later.
if ( pUserListId )
pDPObj->BuildAllDimensionMembers();
if (nDimIndex < 0)
// Invalid dimension index. Bail out.
return;
ScDPSaveData* pSaveData = pDPObj->GetSaveData();
if (!pSaveData)
return;
ScDPSaveData aNewSaveData(*pSaveData);
bool bDataLayout;
OUString aDimName = pDPObj->GetDimName(nDimIndex, bDataLayout);
ScDPSaveDimension* pSaveDim = aNewSaveData.GetDimensionByName(aDimName);
if (!pSaveDim)
return;
// manual evaluation of sort order is only needed if a user list id is given
if ( pUserListId )
{
typedef ScDPSaveDimension::MemberList MemList;
const MemList& rDimMembers = pSaveDim->GetMembers();
vector<OUString> aMembers;
std::unordered_set<OUString> aMemberSet;
size_t nMemberCount = 0;
for (ScDPSaveMember* pMem : rDimMembers)
{
aMembers.push_back(pMem->GetName());
aMemberSet.insert(pMem->GetName());
++nMemberCount;
}
// Sort the member list in ascending order.
ScOUStringCollate aCollate( &ScGlobal::GetCollator() );
std::stable_sort(aMembers.begin(), aMembers.end(), aCollate);
// Collect and rank those custom sort strings that also exist in the member name list.
typedef std::unordered_map<OUString, sal_uInt16> UserSortMap;
UserSortMap aSubStrs;
sal_uInt16 nSubCount = 0;
ScUserList& rUserList = ScGlobal::GetUserList();
size_t nUserListSize = rUserList.size();
if (!nUserListSize || *pUserListId >= static_cast<sal_uInt16>(nUserListSize))
return;
const ScUserListData& rData = rUserList[*pUserListId];
sal_uInt16 n = rData.GetSubCount();
for (sal_uInt16 i = 0; i < n; ++i)
{
OUString aSub = rData.GetSubStr(i);
if (!aMemberSet.count(aSub))
// This string doesn't exist in the member name set. Don't add this.
continue;
aSubStrs.emplace(aSub, nSubCount++);
}
// Rank all members.
vector<OUString> aRankedNames(nMemberCount);
sal_uInt16 nCurStrId = 0;
for (auto const& aMemberName : aMembers)
{
sal_uInt16 nRank = 0;
UserSortMap::const_iterator itrSub = aSubStrs.find(aMemberName);
if (itrSub == aSubStrs.end())
nRank = nSubCount + nCurStrId++;
else
nRank = itrSub->second;
if (!bAscending)
nRank = static_cast< sal_uInt16 >( nMemberCount - nRank - 1 );
aRankedNames[nRank] = aMemberName;
}
// Re-order ScDPSaveMember instances with the new ranks.
for (auto const& aRankedName : aRankedNames)
{
const ScDPSaveMember* pOldMem = pSaveDim->GetExistingMemberByName(aRankedName);
if (!pOldMem)
// All members are supposed to be present.
continue;
pSaveDim->AddMember(std::unique_ptr<ScDPSaveMember>(new ScDPSaveMember(*pOldMem)));
}
// Set the sorting mode to manual for now. We may introduce a new sorting
// mode later on.
sheet::DataPilotFieldSortInfo aSortInfo;
aSortInfo.Mode = sheet::DataPilotFieldSortMode::MANUAL;
pSaveDim->SetSortInfo(&aSortInfo);
}
else
{
// without user list id, just apply sorting mode
sheet::DataPilotFieldSortInfo aSortInfo;
aSortInfo.Mode = sheet::DataPilotFieldSortMode::NAME;
aSortInfo.IsAscending = bAscending;
pSaveDim->SetSortInfo(&aSortInfo);
}
// Update the datapilot with the newly sorted field members.
std::unique_ptr<ScDPObject> pNewObj(new ScDPObject(*pDPObj));
pNewObj->SetSaveData(aNewSaveData);
ScDBDocFunc aFunc(*GetViewData().GetDocShell());
aFunc.DataPilotUpdate(pDPObj, pNewObj.get(), true, false);
}
bool ScDBFunc::DataPilotMove( const ScRange& rSource, const ScAddress& rDest )
{
bool bRet = false;
ScDocument& rDoc = GetViewData().GetDocument();
ScDPObject* pDPObj = rDoc.GetDPAtCursor( rSource.aStart.Col(), rSource.aStart.Row(), rSource.aStart.Tab() );
if ( pDPObj && pDPObj == rDoc.GetDPAtCursor( rDest.Col(), rDest.Row(), rDest.Tab() ) )
{
sheet::DataPilotTableHeaderData aDestData;
pDPObj->GetHeaderPositionData( rDest, aDestData );
bool bValid = ( aDestData.Dimension >= 0 ); // dropping onto a field
// look through the source range
std::unordered_set< OUString > aMembersSet; // for lookup
std::vector< OUString > aMembersVector; // members in original order, for inserting
aMembersVector.reserve( std::max( static_cast<SCSIZE>( rSource.aEnd.Col() - rSource.aStart.Col() + 1 ),
static_cast<SCSIZE>( rSource.aEnd.Row() - rSource.aStart.Row() + 1 ) ) );
for (SCROW nRow = rSource.aStart.Row(); bValid && nRow <= rSource.aEnd.Row(); ++nRow )
for (SCCOL nCol = rSource.aStart.Col(); bValid && nCol <= rSource.aEnd.Col(); ++nCol )
{
sheet::DataPilotTableHeaderData aSourceData;
pDPObj->GetHeaderPositionData( ScAddress( nCol, nRow, rSource.aStart.Tab() ), aSourceData );
if ( aSourceData.Dimension == aDestData.Dimension && !aSourceData.MemberName.isEmpty() )
{
if ( aMembersSet.insert( aSourceData.MemberName ).second )
{
aMembersVector.push_back( aSourceData.MemberName );
}
// duplicates are ignored
}
else
bValid = false; // empty (subtotal) or different field
}
if ( bValid )
{
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( aDestData.Dimension, bIsDataLayout );
if ( !bIsDataLayout )
{
ScDPSaveData aData( *pDPObj->GetSaveData() );
ScDPSaveDimension* pDim = aData.GetDimensionByName( aDimName );
// get all member names in source order
uno::Sequence<OUString> aMemberNames;
pDPObj->GetMemberNames( aDestData.Dimension, aMemberNames );
bool bInserted = false;
for (const OUString& aMemberStr : aMemberNames)
{
if ( !bInserted && aMemberStr == aDestData.MemberName )
{
// insert dragged items before this item
for ( const auto& rMember : aMembersVector )
lcl_MoveToEnd( *pDim, rMember );
bInserted = true;
}
if ( aMembersSet.find( aMemberStr ) == aMembersSet.end() ) // skip dragged items
lcl_MoveToEnd( *pDim, aMemberStr );
}
// insert dragged item at end if dest wasn't found (for example, empty)
if ( !bInserted )
for ( const auto& rMember : aMembersVector )
lcl_MoveToEnd( *pDim, rMember );
// Items that were in SaveData, but not in the source, end up at the start of the list.
// set flag for manual sorting
sheet::DataPilotFieldSortInfo aSortInfo;
aSortInfo.Mode = sheet::DataPilotFieldSortMode::MANUAL;
pDim->SetSortInfo( &aSortInfo );
// apply changes
ScDBDocFunc aFunc( *GetViewData().GetDocShell() );
std::unique_ptr<ScDPObject> pNewObj(new ScDPObject( *pDPObj ));
pNewObj->SetSaveData( aData );
aFunc.DataPilotUpdate( pDPObj, pNewObj.get(), true, false ); //! bApi for drag&drop?
pNewObj.reset();
Unmark(); // entry was moved - no use in leaving the old cell selected
bRet = true;
}
}
}
return bRet;
}
bool ScDBFunc::HasSelectionForDrillDown( css::sheet::DataPilotFieldOrientation& rOrientation )
{
bool bRet = false;
ScDPObject* pDPObj = GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() );
if ( pDPObj )
{
ScDPUniqueStringSet aEntries;
tools::Long nSelectDimension = -1;
GetSelectedMemberList( aEntries, nSelectDimension );
if (!aEntries.empty())
{
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( nSelectDimension, bIsDataLayout );
if ( !bIsDataLayout )
{
ScDPSaveData* pSaveData = pDPObj->GetSaveData();
ScDPSaveDimension* pDim = pSaveData->GetExistingDimensionByName( aDimName );
if ( pDim )
{
css::sheet::DataPilotFieldOrientation nDimOrient = pDim->GetOrientation();
ScDPSaveDimension* pInner = pSaveData->GetInnermostDimension( nDimOrient );
if ( pDim == pInner )
{
rOrientation = nDimOrient;
bRet = true;
}
}
}
}
}
return bRet;
}
void ScDBFunc::SetDataPilotDetails(bool bShow, const OUString* pNewDimensionName)
{
ScDPObject* pDPObj = GetViewData().GetDocument().GetDPAtCursor( GetViewData().GetCurX(),
GetViewData().GetCurY(), GetViewData().GetTabNo() );
if ( !pDPObj )
return;
ScDPUniqueStringSet aEntries;
tools::Long nSelectDimension = -1;
GetSelectedMemberList( aEntries, nSelectDimension );
if (aEntries.empty())
return;
bool bIsDataLayout;
OUString aDimName = pDPObj->GetDimName( nSelectDimension, bIsDataLayout );
if ( bIsDataLayout )
return;
ScDPSaveData aData( *pDPObj->GetSaveData() );
ScDPSaveDimension* pDim = aData.GetDimensionByName( aDimName );
if ( bShow && pNewDimensionName )
{
// add the new dimension with the same orientation, at the end
ScDPSaveDimension* pNewDim = aData.GetDimensionByName( *pNewDimensionName );
ScDPSaveDimension* pDuplicated = nullptr;
if ( pNewDim->GetOrientation() == sheet::DataPilotFieldOrientation_DATA )
{
// Need to duplicate the dimension, create column/row in addition to data:
// The duplicated dimension inherits the existing settings, pNewDim is modified below.
pDuplicated = aData.DuplicateDimension( *pNewDimensionName );
}
css::sheet::DataPilotFieldOrientation nOrientation = pDim->GetOrientation();
pNewDim->SetOrientation( nOrientation );
tools::Long nPosition = LONG_MAX;
aData.SetPosition( pNewDim, nPosition );
ScDPSaveDimension* pDataLayout = aData.GetDataLayoutDimension();
if ( pDataLayout->GetOrientation() == nOrientation &&
aData.GetDataDimensionCount() <= 1 )
{
// If there is only one data dimension, the data layout dimension
// must still be the last one in its orientation.
aData.SetPosition( pDataLayout, nPosition );
}
if ( pDuplicated )
{
// The duplicated (data) dimension needs to be behind the original dimension
aData.SetPosition( pDuplicated, nPosition );
}
// Hide details for all visible members (selected are changed below).
//! Use all members from source level instead (including non-visible)?
ScDPUniqueStringSet aVisibleEntries;
pDPObj->GetMemberResultNames( aVisibleEntries, nSelectDimension );
for (const OUString& aVisName : aVisibleEntries)
{
ScDPSaveMember* pMember = pDim->GetMemberByName( aVisName );
pMember->SetShowDetails( false );
}
}
for (const auto& rEntry : aEntries)
{
ScDPSaveMember* pMember = pDim->GetMemberByName(rEntry);
pMember->SetShowDetails( bShow );
}
// apply changes
ScDBDocFunc aFunc( *GetViewData().GetDocShell() );
std::unique_ptr<ScDPObject> pNewObj(new ScDPObject( *pDPObj ));
pNewObj->SetSaveData( aData );
aFunc.DataPilotUpdate( pDPObj, pNewObj.get(), true, false );
pNewObj.reset();
// unmark cell selection
Unmark();
}
void ScDBFunc::ShowDataPilotSourceData( ScDPObject& rDPObj, const Sequence<sheet::DataPilotFieldFilter>& rFilters )
{
ScDocument& rDoc = GetViewData().GetDocument();
if (rDoc.GetDocumentShell()->IsReadOnly())
{
ErrorMessage(STR_READONLYERR);
return;
}
Reference<sheet::XDimensionsSupplier> xDimSupplier = rDPObj.GetSource();
Reference<container::XNameAccess> xDims = xDimSupplier->getDimensions();
Reference<sheet::XDrillDownDataSupplier> xDDSupplier(xDimSupplier, UNO_QUERY);
if (!xDDSupplier.is())
return;
Sequence< Sequence<Any> > aTabData = xDDSupplier->getDrillDownData(rFilters);
sal_Int32 nRowSize = aTabData.getLength();
if (nRowSize <= 1)
// There is no data to show. Bail out.
return;
SCCOL nColSize = aTabData[0].getLength();
SCTAB nNewTab = GetViewData().GetTabNo();
ScDocumentUniquePtr pInsDoc(new ScDocument(SCDOCMODE_CLIP));
pInsDoc->ResetClip( &rDoc, nNewTab );
for (SCROW nRow = 0; nRow < nRowSize; ++nRow)
{
for (SCCOL nCol = 0; nCol < nColSize; ++nCol)
{
const Any& rAny = aTabData[nRow][nCol];
OUString aStr;
double fVal;
if (rAny >>= aStr)
{
pInsDoc->SetString(ScAddress(nCol,nRow,nNewTab), aStr);
}
else if (rAny >>= fVal)
pInsDoc->SetValue(nCol, nRow, nNewTab, fVal);
}
}
// set number format (important for dates)
for (SCCOL nCol = 0; nCol < nColSize; ++nCol)
{
OUString aStr;
if (!(aTabData[0][nCol] >>= aStr))
continue;
Reference<XPropertySet> xPropSet(xDims->getByName(aStr), UNO_QUERY);
if (!xPropSet.is())
continue;
Any any = xPropSet->getPropertyValue( SC_UNO_DP_NUMBERFO );
sal_Int32 nNumFmt = 0;
if (!(any >>= nNumFmt))
continue;
ScPatternAttr aPattern(pInsDoc->getCellAttributeHelper());
aPattern.GetItemSet().Put( SfxUInt32Item(ATTR_VALUE_FORMAT, static_cast<sal_uInt32>(nNumFmt)) );
pInsDoc->ApplyPatternAreaTab(nCol, 1, nCol, nRowSize-1, nNewTab, aPattern);
}
SCCOL nEndCol = 0;
SCROW nEndRow = 0;
pInsDoc->GetCellArea( nNewTab, nEndCol, nEndRow );
pInsDoc->SetClipArea( ScRange( 0, 0, nNewTab, nEndCol, nEndRow, nNewTab ) );
SfxUndoManager* pMgr = GetViewData().GetDocShell()->GetUndoManager();
OUString aUndo = ScResId( STR_UNDO_DOOUTLINE );
pMgr->EnterListAction( aUndo, aUndo, 0, GetViewData().GetViewShell()->GetViewShellId() );
OUString aNewTabName;
rDoc.CreateValidTabName(aNewTabName);
if ( InsertTable(aNewTabName, nNewTab) )
PasteFromClip( InsertDeleteFlags::ALL, pInsDoc.get() );
pMgr->LeaveListAction();
}
// repeat data base operations (sorting, filtering, subtotals)
void ScDBFunc::RepeatDB( bool bRecord )
{
SCCOL nCurX = GetViewData().GetCurX();
SCROW nCurY = GetViewData().GetCurY();
SCTAB nTab = GetViewData().GetTabNo();
ScDocument& rDoc = GetViewData().GetDocument();
ScDBData* pDBData = GetDBData();
if (bRecord && !rDoc.IsUndoEnabled())
bRecord = false;
ScQueryParam aQueryParam;
pDBData->GetQueryParam( aQueryParam );
bool bQuery = aQueryParam.GetEntry(0).bDoQuery;
ScSortParam aSortParam;
pDBData->GetSortParam( aSortParam );
bool bSort = aSortParam.maKeyState[0].bDoSort;
ScSubTotalParam aSubTotalParam;
pDBData->GetSubTotalParam( aSubTotalParam );
bool bSubTotal = aSubTotalParam.bGroupActive[0] && !aSubTotalParam.bRemoveOnly;
if ( bQuery || bSort || bSubTotal )
{
bool bQuerySize = false;
ScRange aOldQuery;
ScRange aNewQuery;
if (bQuery && !aQueryParam.bInplace)
{
ScDBData* pDest = rDoc.GetDBAtCursor( aQueryParam.nDestCol, aQueryParam.nDestRow,
aQueryParam.nDestTab, ScDBDataPortion::TOP_LEFT );
if (pDest && pDest->IsDoSize())
{
pDest->GetArea( aOldQuery );
bQuerySize = true;
}
}
SCTAB nDummy;
SCCOL nStartCol;
SCROW nStartRow;
SCCOL nEndCol;
SCROW nEndRow;
pDBData->GetArea( nDummy, nStartCol, nStartRow, nEndCol, nEndRow );
//! undo only needed data ?
ScDocumentUniquePtr pUndoDoc;
std::unique_ptr<ScOutlineTable> pUndoTab;
std::unique_ptr<ScRangeName> pUndoRange;
std::unique_ptr<ScDBCollection> pUndoDB;
if (bRecord)
{
SCTAB nTabCount = rDoc.GetTableCount();
pUndoDoc.reset(new ScDocument( SCDOCMODE_UNDO ));
ScOutlineTable* pTable = rDoc.GetOutlineTable( nTab );
if (pTable)
{
pUndoTab.reset(new ScOutlineTable( *pTable ));
SCCOLROW nOutStartCol; // row/column status
SCCOLROW nOutStartRow;
SCCOLROW nOutEndCol;
SCCOLROW nOutEndRow;
pTable->GetColArray().GetRange( nOutStartCol, nOutEndCol );
pTable->GetRowArray().GetRange( nOutStartRow, nOutEndRow );
pUndoDoc->InitUndo( rDoc, nTab, nTab, true, true );
rDoc.CopyToDocument( static_cast<SCCOL>(nOutStartCol), 0, nTab, static_cast<SCCOL>(nOutEndCol), rDoc.MaxRow(), nTab, InsertDeleteFlags::NONE, false, *pUndoDoc );
rDoc.CopyToDocument( 0, nOutStartRow, nTab, rDoc.MaxCol(), nOutEndRow, nTab, InsertDeleteFlags::NONE, false, *pUndoDoc );
}
else
pUndoDoc->InitUndo( rDoc, nTab, nTab, false, true );
// Record data range - including filter results
rDoc.CopyToDocument( 0,nStartRow,nTab, rDoc.MaxCol(),nEndRow,nTab, InsertDeleteFlags::ALL, false, *pUndoDoc );
// all formulas for reference
rDoc.CopyToDocument( 0,0,0, rDoc.MaxCol(),rDoc.MaxRow(),nTabCount-1, InsertDeleteFlags::FORMULA, false, *pUndoDoc );
// data base and other ranges
ScRangeName* pDocRange = rDoc.GetRangeName();
if (!pDocRange->empty())
pUndoRange.reset(new ScRangeName( *pDocRange ));
ScDBCollection* pDocDB = rDoc.GetDBCollection();
if (!pDocDB->empty())
pUndoDB.reset(new ScDBCollection( *pDocDB ));
}
if (bSort && bSubTotal)
{
// sort without subtotals
aSubTotalParam.bRemoveOnly = true; // is reset below
DoSubTotals( aSubTotalParam, false );
}
if (bSort)
{
pDBData->GetSortParam( aSortParam ); // range may have changed
Sort( aSortParam, false, false);
}
if (bQuery)
{
pDBData->GetQueryParam( aQueryParam ); // range may have changed
ScRange aAdvSource;
if (pDBData->GetAdvancedQuerySource(aAdvSource))
{
rDoc.CreateQueryParam(aAdvSource, aQueryParam);
Query( aQueryParam, &aAdvSource, false );
}
else
Query( aQueryParam, nullptr, false );
// if not inplace the sheet may have changed
if ( !aQueryParam.bInplace && aQueryParam.nDestTab != nTab )
SetTabNo( nTab );
}
if (bSubTotal)
{
pDBData->GetSubTotalParam( aSubTotalParam ); // range may have changed
aSubTotalParam.bRemoveOnly = false;
DoSubTotals( aSubTotalParam, false );
}
if (bRecord)
{
SCTAB nDummyTab;
SCCOL nDummyCol;
SCROW nDummyRow, nNewEndRow;
pDBData->GetArea( nDummyTab, nDummyCol,nDummyRow, nDummyCol,nNewEndRow );
const ScRange* pOld = nullptr;
const ScRange* pNew = nullptr;
if (bQuerySize)
{
ScDBData* pDest = rDoc.GetDBAtCursor( aQueryParam.nDestCol, aQueryParam.nDestRow,
aQueryParam.nDestTab, ScDBDataPortion::TOP_LEFT );
if (pDest)
{
pDest->GetArea( aNewQuery );
pOld = &aOldQuery;
pNew = &aNewQuery;
}
}
GetViewData().GetDocShell()->GetUndoManager()->AddUndoAction(
std::make_unique<ScUndoRepeatDB>( GetViewData().GetDocShell(), nTab,
nStartCol, nStartRow, nEndCol, nEndRow,
nNewEndRow,
nCurX, nCurY,
std::move(pUndoDoc), std::move(pUndoTab),
std::move(pUndoRange), std::move(pUndoDB),
pOld, pNew ) );
}
GetViewData().GetDocShell()->PostPaint(
ScRange(0, 0, nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab),
PaintPartFlags::Grid | PaintPartFlags::Left | PaintPartFlags::Top | PaintPartFlags::Size);
}
else // "no not execute any operations"
ErrorMessage(STR_MSSG_REPEATDB_0);
}
void ScDBFunc::OnLOKShowHideColRow(bool bColumns, SCCOLROW nStart)
{
if (!comphelper::LibreOfficeKit::isActive())
return;
SCTAB nCurrentTabIndex = GetViewData().GetTabNo();
SfxViewShell* pThisViewShell = GetViewData().GetViewShell();
SfxViewShell* pViewShell = SfxViewShell::GetFirst();
while (pViewShell)
{
ScTabViewShell* pTabViewShell = dynamic_cast<ScTabViewShell*>(pViewShell);
if (pTabViewShell && pTabViewShell->GetDocId() == pThisViewShell->GetDocId())
{
if (bColumns)
{
if (ScPositionHelper* pPosHelper = pTabViewShell->GetViewData().GetLOKWidthHelper(nCurrentTabIndex))
pPosHelper->invalidateByIndex(nStart);
}
else
{
if (ScPositionHelper* pPosHelper = pTabViewShell->GetViewData().GetLOKHeightHelper(nCurrentTabIndex))
pPosHelper->invalidateByIndex(nStart);
}
if (pTabViewShell->getPart() == nCurrentTabIndex)
{
pTabViewShell->ShowCursor();
pTabViewShell->MarkDataChanged();
}
}
pViewShell = SfxViewShell::GetNext(*pViewShell);
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'append' is required to be utilized.
↑ V530 The return value of function 'append' is required to be utilized.
↑ V530 The return value of function 'append' is required to be utilized.
↑ V530 The return value of function 'append' is required to be utilized.
↑ V1028 Possible overflow. Consider casting operands, not the result.
↑ V1028 Possible overflow. Consider casting operands, not the result.