/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <hintids.hxx>
#include <sot/exchange.hxx>
#include <svx/svdpage.hxx>
#include <editeng/keepitem.hxx>
#include <editeng/ulspitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/shaditem.hxx>
#include <editeng/protitem.hxx>
#include <editeng/opaqitem.hxx>
#include <osl/diagnose.h>
#include <svx/svdouno.hxx>
#include <editeng/frmdiritem.hxx>
#include <istype.hxx>
#include <swmodule.hxx>
#include <modcfg.hxx>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/embed/XEmbeddedObject.hpp>
#include <SwStyleNameMapper.hxx>
#include <drawdoc.hxx>
#include <fchrfmt.hxx>
#include <frmatr.hxx>
#include <txatbase.hxx>
#include <fmtfld.hxx>
#include <fmtornt.hxx>
#include <fmtcntnt.hxx>
#include <fmtanchr.hxx>
#include <fmtfsize.hxx>
#include <fmtsrnd.hxx>
#include <fmtflcnt.hxx>
#include <frmfmt.hxx>
#include <pam.hxx>
#include <ndtxt.hxx>
#include <ndnotxt.hxx>
#include <ndole.hxx>
#include <doc.hxx>
#include <IDocumentUndoRedo.hxx>
#include <IDocumentRedlineAccess.hxx>
#include <DocumentSettingManager.hxx>
#include <IDocumentDrawModelAccess.hxx>
#include <IDocumentFieldsAccess.hxx>
#include <IDocumentState.hxx>
#include <IDocumentLayoutAccess.hxx>
#include <IDocumentStylePoolAccess.hxx>
#include <rootfrm.hxx>
#include <pagefrm.hxx>
#include <cntfrm.hxx>
#include <txtfrm.hxx>
#include <notxtfrm.hxx>
#include <dflyobj.hxx>
#include <dcontact.hxx>
#include <swundo.hxx>
#include <flypos.hxx>
#include <UndoInsert.hxx>
#include <expfld.hxx>
#include <poolfmt.hxx>
#include <docary.hxx>
#include <swtable.hxx>
#include <tblsel.hxx>
#include <txtftn.hxx>
#include <ftnidx.hxx>
#include <ftninfo.hxx>
#include <pagedesc.hxx>
#include <strings.hrc>
#include <frameformats.hxx>
#include <tools/datetimeutils.hxx>
#include <comphelper/string.hxx>
#include <o3tl/string_view.hxx>
#include <sortedobjs.hxx>
#include <string_view>
#include <vector>
using namespace ::com::sun::star;
#define DEF_FLY_WIDTH 2268 // Default width for FlyFrames (2268 == 4cm)
static bool lcl_IsItemSet(const SwContentNode & rNode, sal_uInt16 which)
{
bool bResult = false;
if (SfxItemState::SET == rNode.GetSwAttrSet().GetItemState(which))
bResult = true;
return bResult;
}
rtl::Reference<SdrObject> SwDoc::CloneSdrObj( const SdrObject& rObj, bool bMoveWithinDoc,
bool bInsInPage )
{
// #i52858# - method name changed
SdrPage *pPg = getIDocumentDrawModelAccess().GetOrCreateDrawModel().GetPage( 0 );
if( !pPg )
{
auto pNewPage = getIDocumentDrawModelAccess().GetDrawModel()->AllocPage( false );
getIDocumentDrawModelAccess().GetDrawModel()->InsertPage( pNewPage.get() );
pPg = pNewPage.get();
}
// TTTT Clone directly to target SdrModel
rtl::Reference<SdrObject> pObj(rObj.CloneSdrObject(*getIDocumentDrawModelAccess().GetDrawModel()));
if( bMoveWithinDoc && SdrInventor::FmForm == pObj->GetObjInventor() )
{
// We need to preserve the Name for Controls
uno::Reference< awt::XControlModel > xModel = static_cast<SdrUnoObj*>(pObj.get())->GetUnoControlModel();
uno::Any aVal;
uno::Reference< beans::XPropertySet > xSet(xModel, uno::UNO_QUERY);
static constexpr OUString sName(u"Name"_ustr);
if( xSet.is() )
aVal = xSet->getPropertyValue( sName );
if( bInsInPage )
pPg->InsertObjectThenMakeNameUnique( pObj.get() );
if( xSet.is() )
xSet->setPropertyValue( sName, aVal );
}
else if( bInsInPage )
pPg->InsertObjectThenMakeNameUnique( pObj.get() );
// For drawing objects: set layer of cloned object to invisible layer
SdrLayerID nLayerIdForClone = rObj.GetLayer();
if ( dynamic_cast<const SwFlyDrawObj*>( pObj.get() ) == nullptr &&
dynamic_cast<const SwVirtFlyDrawObj*>( pObj.get() ) == nullptr &&
pObj->GetObjIdentifier() != SdrObjKind::NewFrame )
{
if ( getIDocumentDrawModelAccess().IsVisibleLayerId( nLayerIdForClone ) )
{
nLayerIdForClone = getIDocumentDrawModelAccess().GetInvisibleLayerIdByVisibleOne( nLayerIdForClone );
}
}
pObj->SetLayer( nLayerIdForClone );
return pObj;
}
SwFlyFrameFormat* SwDoc::MakeFlySection_( const SwPosition& rAnchPos,
const SwContentNode& rNode,
RndStdIds eRequestId,
const SfxItemSet* pFlySet,
SwFrameFormat* pFrameFormat )
{
if( !pFrameFormat )
pFrameFormat = getIDocumentStylePoolAccess().GetFrameFormatFromPool( RES_POOLFRM_FRAME );
OUString sName;
switch( rNode.GetNodeType() )
{
case SwNodeType::Grf: sName = GetUniqueGrfName(); break;
case SwNodeType::Ole: sName = GetUniqueOLEName(); break;
default: sName = GetUniqueFrameName(); break;
}
SwFlyFrameFormat* pFormat = MakeFlyFrameFormat( sName, pFrameFormat );
// Create content and connect to the format.
// Create ContentNode and put it into the autotext selection.
SwNodeRange aRange( GetNodes().GetEndOfAutotext(), SwNodeOffset(-1),
GetNodes().GetEndOfAutotext() );
GetNodes().SectionDown( &aRange, SwFlyStartNode );
pFormat->SetFormatAttr( SwFormatContent( rNode.StartOfSectionNode() ));
const SwFormatAnchor* pAnchor = nullptr;
if( pFlySet )
{
pAnchor = pFlySet->GetItemIfSet( RES_ANCHOR, false );
if( SfxItemState::SET == pFlySet->GetItemState( RES_CNTNT, false ))
{
SfxItemSet aTmpSet( *pFlySet );
aTmpSet.ClearItem( RES_CNTNT );
pFormat->SetFormatAttr( aTmpSet );
}
else
pFormat->SetFormatAttr( *pFlySet );
}
// Anchor not yet set?
RndStdIds eAnchorId;
// #i107811# Assure that at-page anchored fly frames have a page num or a
// content anchor set.
if ( !pAnchor ||
( RndStdIds::FLY_AT_PAGE != pAnchor->GetAnchorId() &&
!pAnchor->GetAnchorNode() ) ||
( RndStdIds::FLY_AT_PAGE == pAnchor->GetAnchorId() &&
!pAnchor->GetAnchorNode() &&
pAnchor->GetPageNum() == 0 ) )
{
// set it again, needed for Undo
SwFormatAnchor aAnch( pFormat->GetAnchor() );
if (pAnchor && (RndStdIds::FLY_AT_FLY == pAnchor->GetAnchorId()))
{
const SwNode* pFlyStartNode = rAnchPos.GetNode().FindFlyStartNode();
assert(pFlyStartNode);
SwPosition aPos(*pFlyStartNode);
aAnch.SetAnchor(&aPos);
eAnchorId = RndStdIds::FLY_AT_FLY;
}
else
{
if( eRequestId != aAnch.GetAnchorId() &&
SfxItemState::SET != pFormat->GetItemState( RES_ANCHOR ) )
{
aAnch.SetType( eRequestId );
}
eAnchorId = aAnch.GetAnchorId();
if ( RndStdIds::FLY_AT_PAGE != eAnchorId || !pAnchor || aAnch.GetPageNum() == 0)
{
aAnch.SetAnchor( &rAnchPos );
}
}
pFormat->SetFormatAttr( aAnch );
}
else
eAnchorId = pFormat->GetAnchor().GetAnchorId();
if ( RndStdIds::FLY_AS_CHAR == eAnchorId )
{
const sal_Int32 nStt = rAnchPos.GetContentIndex();
SwTextNode * pTextNode = rAnchPos.GetNode().GetTextNode();
OSL_ENSURE(pTextNode!= nullptr, "There should be a SwTextNode!");
if (pTextNode != nullptr)
{
SwFormatFlyCnt aFormat( pFormat );
// may fail if there's no space left or header/ftr
if (!pTextNode->InsertItem(aFormat, nStt, nStt))
{ // pFormat is dead now
return nullptr;
}
}
}
if( SfxItemState::SET != pFormat->GetAttrSet().GetItemState( RES_FRM_SIZE ))
{
SwFormatFrameSize aFormatSize( SwFrameSize::Variable, 0, DEF_FLY_WIDTH );
const SwNoTextNode* pNoTextNode = rNode.GetNoTextNode();
if( pNoTextNode )
{
// Set size
Size aSize( pNoTextNode->GetTwipSize() );
if( MINFLY > aSize.Width() )
aSize.setWidth( DEF_FLY_WIDTH );
aFormatSize.SetWidth( aSize.Width() );
if( aSize.Height() )
{
aFormatSize.SetHeight( aSize.Height() );
aFormatSize.SetHeightSizeType( SwFrameSize::Fixed );
}
}
pFormat->SetFormatAttr( aFormatSize );
}
// Set up frames
if( getIDocumentLayoutAccess().GetCurrentViewShell() )
pFormat->MakeFrames(); // ???
if (GetIDocumentUndoRedo().DoesUndo())
{
SwNodeOffset nNodeIdx = rAnchPos.GetNodeIndex();
const sal_Int32 nCntIdx = rAnchPos.GetContentIndex();
GetIDocumentUndoRedo().AppendUndo(
std::make_unique<SwUndoInsLayFormat>( pFormat, nNodeIdx, nCntIdx ));
}
getIDocumentState().SetModified();
return pFormat;
}
SwFlyFrameFormat* SwDoc::MakeFlySection( RndStdIds eAnchorType,
const SwPosition* pAnchorPos,
const SfxItemSet* pFlySet,
SwFrameFormat* pFrameFormat, bool bCalledFromShell )
{
SwFlyFrameFormat* pFormat = nullptr;
if ( !pAnchorPos && (RndStdIds::FLY_AT_PAGE != eAnchorType) )
{
const SwFormatAnchor* pAnch;
if( (pFlySet && (pAnch = pFlySet->GetItemIfSet( RES_ANCHOR, false ))) ||
( pFrameFormat && (pAnch = pFrameFormat->GetItemIfSet(RES_ANCHOR)) ) )
{
if ( RndStdIds::FLY_AT_PAGE != pAnch->GetAnchorId() )
{
pAnchorPos = pAnch->GetContentAnchor();
}
}
}
if (pAnchorPos)
{
if( !pFrameFormat )
pFrameFormat = getIDocumentStylePoolAccess().GetFrameFormatFromPool( RES_POOLFRM_FRAME );
sal_uInt16 nCollId = o3tl::narrowing<sal_uInt16>(
GetDocumentSettingManager().get(DocumentSettingId::HTML_MODE) ? RES_POOLCOLL_TEXT : RES_POOLCOLL_FRAME );
/* If there is no adjust item in the paragraph style for the content node of the new fly section
propagate an existing adjust item at the anchor to the new content node. */
SwContentNode * pNewTextNd = GetNodes().MakeTextNode
( GetNodes().GetEndOfAutotext(),
getIDocumentStylePoolAccess().GetTextCollFromPool( nCollId ));
SwContentNode * pAnchorNode = pAnchorPos->GetNode().GetContentNode();
// pAnchorNode from cursor must be valid, unless a whole table is selected (in which
// case the node is not a content node, and pAnchorNode is nullptr). In the latter case,
// bCalledFromShell is false.
assert(!bCalledFromShell || pAnchorNode);
const SfxPoolItem * pItem = nullptr;
if (bCalledFromShell && !lcl_IsItemSet(*pNewTextNd, RES_PARATR_ADJUST) &&
SfxItemState::SET == pAnchorNode->GetSwAttrSet().GetItemState(RES_PARATR_ADJUST, true, &pItem))
{
pNewTextNd->SetAttr(*pItem);
}
pFormat = MakeFlySection_( *pAnchorPos, *pNewTextNd,
eAnchorType, pFlySet, pFrameFormat );
}
return pFormat;
}
SwFlyFrameFormat* SwDoc::MakeFlyAndMove( const SwPaM& rPam, const SfxItemSet& rSet,
const SwSelBoxes* pSelBoxes,
SwFrameFormat *pParent )
{
const SwFormatAnchor& rAnch = rSet.Get( RES_ANCHOR );
GetIDocumentUndoRedo().StartUndo( SwUndoId::INSLAYFMT, nullptr );
SwFlyFrameFormat* pFormat = MakeFlySection( rAnch.GetAnchorId(), rPam.GetPoint(),
&rSet, pParent );
// If content is selected, it becomes the new frame's content.
// Namely, it is moved into the NodeArray's appropriate section.
if( pFormat )
{
do { // middle check loop
const SwFormatContent &rContent = pFormat->GetContent();
OSL_ENSURE( rContent.GetContentIdx(), "No content prepared." );
SwNodeIndex aIndex( *(rContent.GetContentIdx()), 1 );
// Attention: Do not create an index on the stack, or we
// cannot delete ContentNode in the end!
std::optional<SwPosition> oPos( std::in_place, aIndex );
if( pSelBoxes && !pSelBoxes->empty() )
{
// Table selection
// Copy parts of a table: create a table with the same width as the
// original one and move (copy and delete) the selected boxes.
// The size is corrected on a percentage basis.
SwTableNode* pTableNd = const_cast<SwTableNode*>((*pSelBoxes)[0]->
GetSttNd()->FindTableNode());
if( !pTableNd )
break;
SwTable& rTable = pTableNd->GetTable();
// Did we select the whole table?
if( pSelBoxes->size() == rTable.GetTabSortBoxes().size() )
{
// move the whole table
SwNodeRange aRg( *pTableNd, SwNodeOffset(0), *pTableNd->EndOfSectionNode(), SwNodeOffset(1) );
// If we move the whole table and it is located within a
// FlyFrame, the we create a TextNode after it.
// So that this FlyFrame is preserved.
if( aRg.aEnd.GetNode().IsEndNode() )
GetNodes().MakeTextNode( aRg.aStart.GetNode(),
GetDfltTextFormatColl() );
// Create undo actions if undo is enabled.
getIDocumentContentOperations().MoveNodeRange( aRg, oPos->GetNode(), SwMoveFlags::CREATEUNDOOBJ );
}
else
{
rTable.MakeCopy(*this, *oPos, *pSelBoxes);
// Don't delete a part of a table with row span!!
// You could delete the content instead -> ToDo
//rTable.DeleteSel( this, *pSelBoxes, 0, 0, true, true );
}
// If the table is within the frame, then copy without the following TextNode
aIndex = rContent.GetContentIdx()->GetNode().EndOfSectionIndex() - 1;
OSL_ENSURE( aIndex.GetNode().GetTextNode(),
"a TextNode should be here" );
oPos.reset(); // Deregister index!
// Delete the empty paragraph after the table, in a way that undo is aware of this.
SwPaM aPaM(aIndex);
getIDocumentContentOperations().DelFullPara(aPaM);
}
else
{
// copy all Pams and then delete all
bool bOldFlag = mbCopyIsMove;
bool const bOldUndo = GetIDocumentUndoRedo().DoesUndo();
bool const bOldRedlineMove(getIDocumentRedlineAccess().IsRedlineMove());
mbCopyIsMove = true;
GetIDocumentUndoRedo().DoUndo(false);
getIDocumentRedlineAccess().SetRedlineMove(true);
for(const SwPaM& rTmp : rPam.GetRingContainer())
{
if( rTmp.HasMark() &&
*rTmp.GetPoint() != *rTmp.GetMark() )
{
// aPos is the newly created fly section, so definitely outside rPam, it's pointless to check that again.
getIDocumentContentOperations().CopyRange(*const_cast<SwPaM*>(&rTmp), *oPos, SwCopyFlags::IsMoveToFly);
}
}
getIDocumentRedlineAccess().SetRedlineMove(bOldRedlineMove);
mbCopyIsMove = bOldFlag;
GetIDocumentUndoRedo().DoUndo(bOldUndo);
for(const SwPaM& rTmp : rPam.GetRingContainer())
{
if( rTmp.HasMark() &&
*rTmp.GetPoint() != *rTmp.GetMark() )
{
getIDocumentContentOperations().DeleteAndJoin( *const_cast<SwPaM*>(&rTmp) );
}
}
}
} while( false );
}
getIDocumentState().SetModified();
GetIDocumentUndoRedo().EndUndo( SwUndoId::INSLAYFMT, nullptr );
return pFormat;
}
/*
* paragraph frames - o.k. if the PaM includes the paragraph from the beginning
* to the beginning of the next paragraph at least
* frames at character - o.k. if the PaM starts at least at the same position
* as the frame
*/
static bool lcl_TstFlyRange( const SwPaM* pPam, const SwFormatAnchor& rFlyFormatAnchor )
{
bool bOk = false;
const SwPaM* pTmp = pPam;
do {
const SwNodeOffset nFlyIndex = rFlyFormatAnchor.GetAnchorNode()->GetIndex();
auto [pPaMStart, pPaMEnd] = pTmp->StartEnd(); // SwPosition*
const SwNodeOffset nPamStartIndex = pPaMStart->GetNodeIndex();
const SwNodeOffset nPamEndIndex = pPaMEnd->GetNodeIndex();
if (RndStdIds::FLY_AT_PARA == rFlyFormatAnchor.GetAnchorId())
bOk = (nPamStartIndex < nFlyIndex && nPamEndIndex > nFlyIndex) ||
(((nPamStartIndex == nFlyIndex) && (pPaMStart->GetContentIndex() == 0)) &&
(nPamEndIndex > nFlyIndex));
else
{
const sal_Int32 nFlyContentIndex = rFlyFormatAnchor.GetAnchorContentOffset();
const sal_Int32 nPamEndContentIndex = pPaMEnd->GetContentIndex();
bOk = (nPamStartIndex < nFlyIndex &&
(( nPamEndIndex > nFlyIndex )||
((nPamEndIndex == nFlyIndex) &&
(nPamEndContentIndex > nFlyContentIndex))) )
||
(((nPamStartIndex == nFlyIndex) &&
(pPaMStart->GetContentIndex() <= nFlyContentIndex)) &&
((nPamEndIndex > nFlyIndex) ||
(nPamEndContentIndex > nFlyContentIndex )));
}
if( bOk )
break;
pTmp = pTmp->GetNext();
} while( pPam != pTmp );
return bOk;
}
SwPosFlyFrames SwDoc::GetAllFlyFormats( const SwPaM* pCmpRange, bool bDrawAlso,
bool bAsCharAlso ) const
{
SwPosFlyFrames aRetval;
const SwStartNode* pDirectFly = nullptr;
if (pCmpRange && *pCmpRange->GetPoint() == *pCmpRange->GetMark()
&& (pCmpRange->GetPoint()->GetNode().IsOLENode()
|| pCmpRange->GetPoint()->GetNode().IsGrfNode()))
{
pDirectFly = pCmpRange->GetPoint()->GetNode().FindFlyStartNode();
}
// collect all anchored somehow to paragraphs
for(sw::SpzFrameFormat* pFly: *GetSpzFrameFormats())
{
bool bDrawFormat = bDrawAlso && RES_DRAWFRMFMT == pFly->Which();
bool bFlyFormat = RES_FLYFRMFMT == pFly->Which();
if( bFlyFormat || bDrawFormat )
{
const SwFormatAnchor& rAnchor = pFly->GetAnchor();
SwNode const*const pAnchorNode = rAnchor.GetAnchorNode();
if (!pAnchorNode)
continue;
if (pDirectFly)
{
const SwFormatContent& rContent = pFly->GetContent();
const SwNodeIndex* pContentNodeIndex = rContent.GetContentIdx();
if (pContentNodeIndex && pContentNodeIndex->GetIndex() == pDirectFly->GetIndex())
{
aRetval.insert(SwPosFlyFrame(*pAnchorNode, pFly, aRetval.size()));
break;
}
continue;
}
if ( (RndStdIds::FLY_AT_PARA == rAnchor.GetAnchorId()) ||
(RndStdIds::FLY_AT_FLY == rAnchor.GetAnchorId()) ||
(RndStdIds::FLY_AT_CHAR == rAnchor.GetAnchorId()) ||
((RndStdIds::FLY_AS_CHAR == rAnchor.GetAnchorId()) && bAsCharAlso) )
{
if( pCmpRange && !lcl_TstFlyRange( pCmpRange, rAnchor ))
continue; // not a valid FlyFrame
aRetval.insert(SwPosFlyFrame(*pAnchorNode, pFly, aRetval.size()));
}
}
}
// If we don't have a layout we can't get page anchored FlyFrames.
// Also, page anchored FlyFrames are only returned if no range is specified.
if( !getIDocumentLayoutAccess().GetCurrentViewShell() || pCmpRange )
{
return aRetval;
}
const SwPageFrame *pPage = static_cast<const SwPageFrame*>(getIDocumentLayoutAccess().GetCurrentLayout()->GetLower());
while( pPage )
{
if( pPage->GetSortedObjs() )
{
const SwSortedObjs &rObjs = *pPage->GetSortedObjs();
for(SwAnchoredObject* pAnchoredObj : rObjs)
{
if (!bDrawAlso && !pAnchoredObj->DynCastFlyFrame())
continue;
SwFrameFormat* pFly = pAnchoredObj->GetFrameFormat();
const SwFormatAnchor& rAnchor = pFly->GetAnchor();
if ((RndStdIds::FLY_AT_PARA != rAnchor.GetAnchorId()) &&
(RndStdIds::FLY_AT_FLY != rAnchor.GetAnchorId()) &&
(RndStdIds::FLY_AT_CHAR != rAnchor.GetAnchorId()))
{
const SwContentFrame * pContentFrame = pPage->FindFirstBodyContent();
if ( !pContentFrame )
{
// Oops! An empty page.
// In order not to lose the whole frame (RTF) we
// look for the last Content before the page.
const SwPageFrame *pPrv = static_cast<const SwPageFrame*>(pPage->GetPrev());
while ( !pContentFrame && pPrv )
{
pContentFrame = pPrv->FindFirstBodyContent();
pPrv = static_cast<const SwPageFrame*>(pPrv->GetPrev());
}
}
if ( pContentFrame )
{
const SwNode* pNd( pContentFrame->IsTextFrame()
? static_cast<SwTextFrame const*>(pContentFrame)->GetTextNodeFirst()
: static_cast<SwNoTextFrame const*>(pContentFrame)->GetNode() );
aRetval.insert(SwPosFlyFrame(*pNd, pFly, aRetval.size()));
}
}
}
}
pPage = static_cast<const SwPageFrame*>(pPage->GetNext());
}
return aRetval;
}
/* #i6447# changed behaviour if lcl_CpyAttr:
If the old item set contains the item to set (no inheritance) copy the item
into the new set.
If the old item set contains the item by inheritance and the new set
contains the item, too:
If the two items differ copy the item from the old set to the new set.
Otherwise the new set will not be changed.
*/
static void lcl_CpyAttr( SfxItemSet &rNewSet, const SfxItemSet &rOldSet, sal_uInt16 nWhich )
{
const SfxPoolItem *pOldItem = nullptr;
rOldSet.GetItemState( nWhich, false, &pOldItem);
if (pOldItem != nullptr)
rNewSet.Put( *pOldItem );
else
{
pOldItem = rOldSet.GetItem( nWhich );
if (pOldItem != nullptr)
{
const SfxPoolItem *pNewItem = rNewSet.GetItem( nWhich );
if (pNewItem != nullptr)
{
if (*pOldItem != *pNewItem)
rNewSet.Put( *pOldItem );
}
else {
OSL_FAIL("What am I doing here?");
}
}
else {
OSL_FAIL("What am I doing here?");
}
}
}
static SwFlyFrameFormat *
lcl_InsertLabel(SwDoc & rDoc, SwTextFormatColls *const pTextFormatCollTable,
SwUndoInsertLabel *const pUndo,
SwLabelType const eType, std::u16string_view rText, std::u16string_view rSeparator,
const OUString& rNumberingSeparator,
const bool bBefore, const sal_uInt16 nId, const SwNodeOffset nNdIdx,
const OUString& rCharacterStyle,
const bool bCpyBrd )
{
::sw::UndoGuard const undoGuard(rDoc.GetIDocumentUndoRedo());
bool bTable = false; // To save some code.
// Get the field first, because we retrieve the TextColl via the field's name
OSL_ENSURE( nId == USHRT_MAX || nId < rDoc.getIDocumentFieldsAccess().GetFieldTypes()->size(),
"FieldType index out of bounds." );
SwFieldType *pType = (nId != USHRT_MAX) ? (*rDoc.getIDocumentFieldsAccess().GetFieldTypes())[nId].get() : nullptr;
OSL_ENSURE(!pType || pType->Which() == SwFieldIds::SetExp, "wrong Id for Label");
SwTextFormatColl * pColl = nullptr;
if( pType )
{
for( auto i = pTextFormatCollTable->size(); i; )
{
if( (*pTextFormatCollTable)[ --i ]->GetName()==pType->GetName() )
{
pColl = (*pTextFormatCollTable)[i];
break;
}
}
OSL_ENSURE( pColl, "no text collection found" );
}
if( !pColl )
{
pColl = rDoc.getIDocumentStylePoolAccess().GetTextCollFromPool( RES_POOLCOLL_LABEL );
}
SwTextNode *pNew = nullptr;
SwFlyFrameFormat* pNewFormat = nullptr;
switch ( eType )
{
case SwLabelType::Table:
bTable = true;
[[fallthrough]];
case SwLabelType::Fly:
// At the FlySection's Beginning/End insert the corresponding Node with its Field.
// The Frame is created automatically.
{
SwStartNode *pSttNd = rDoc.GetNodes()[nNdIdx]->GetStartNode();
assert(pSttNd && "No StartNode in InsertLabel.");
SwNodeOffset nNode;
if( bBefore )
{
nNode = pSttNd->GetIndex();
if( !bTable )
++nNode;
}
else
{
nNode = pSttNd->EndOfSectionIndex();
if( bTable )
++nNode;
}
if( pUndo )
pUndo->SetNodePos( nNode );
// Create Node for labeling paragraph.
SwNodeIndex aIdx( rDoc.GetNodes(), nNode );
pNew = rDoc.GetNodes().MakeTextNode( aIdx.GetNode(), pColl );
}
break;
case SwLabelType::Object:
{
// Destroy Frame,
// insert new Frame,
// insert the corresponding Node with Field into the new Frame,
// insert the old Frame with the Object (Picture/OLE) paragraph-bound into the new Frame,
// create Frames.
// Get the FlyFrame's Format and decouple the Layout.
SwFrameFormat *pOldFormat = rDoc.GetNodes()[nNdIdx]->GetFlyFormat();
OSL_ENSURE( pOldFormat, "Couldn't find the Fly's Format." );
// #i115719#
// <title> and <description> attributes are lost when calling <DelFrames()>.
// Thus, keep them and restore them after the calling <MakeFrames()>
auto pOldFlyFrameFormat = dynamic_cast<SwFlyFrameFormat*>(pOldFormat);
const OUString sTitle( pOldFlyFrameFormat
? pOldFlyFrameFormat->GetObjTitle()
: OUString() );
const OUString sDescription( pOldFlyFrameFormat
? pOldFlyFrameFormat->GetObjDescription()
: OUString() );
pOldFormat->DelFrames();
pNewFormat = rDoc.MakeFlyFrameFormat( rDoc.GetUniqueFrameName(),
rDoc.getIDocumentStylePoolAccess().GetFrameFormatFromPool(RES_POOLFRM_FRAME) );
/* #i6447#: Only the selected items are copied from the old
format. */
SwAttrSet aNewSet = pNewFormat->GetAttrSet().CloneAsValue();
// Copy only the set attributes.
// The others should apply from the Templates.
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_PRINT );
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_OPAQUE );
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_PROTECT );
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_SURROUND );
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_VERT_ORIENT );
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_HORI_ORIENT );
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_LR_SPACE );
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_UL_SPACE );
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_BACKGROUND );
if( bCpyBrd )
{
// If there's no BoxItem at graphic, but the new Format has one, then set the
// default item in the new Set. Because the graphic's size has never changed!
const SfxPoolItem *pItem;
if( SfxItemState::SET == pOldFormat->GetAttrSet().
GetItemState( RES_BOX, true, &pItem ))
aNewSet.Put( *pItem );
else if( SfxItemState::SET == pNewFormat->GetAttrSet().
GetItemState( RES_BOX ))
aNewSet.Put( *GetDfltAttr( RES_BOX ) );
if( SfxItemState::SET == pOldFormat->GetAttrSet().
GetItemState( RES_SHADOW, true, &pItem ))
aNewSet.Put( *pItem );
else if( SfxItemState::SET == pNewFormat->GetAttrSet().
GetItemState( RES_SHADOW ))
aNewSet.Put( *GetDfltAttr( RES_SHADOW ) );
}
else
{
// Hard-set the attributes, because they could come from the Template
// and then size calculations could not be correct anymore.
aNewSet.Put( SvxBoxItem(RES_BOX) );
aNewSet.Put( SvxShadowItem(RES_SHADOW) );
}
// Always transfer the anchor, which is a hard attribute anyways.
aNewSet.Put( pOldFormat->GetAnchor() );
// The new one should be changeable in its height.
std::unique_ptr<SwFormatFrameSize> aFrameSize(pOldFormat->GetFrameSize().Clone());
aFrameSize->SetHeightSizeType( SwFrameSize::Minimum );
aNewSet.Put( std::move(aFrameSize) );
SwStartNode* pSttNd = rDoc.GetNodes().MakeTextSection(
rDoc.GetNodes().GetEndOfAutotext(),
SwFlyStartNode, pColl );
aNewSet.Put( SwFormatContent( pSttNd ));
pNewFormat->SetFormatAttr( aNewSet );
// InContents need to be treated in a special way:
// The TextAttribute needs to be destroyed.
// Unfortunately, this also destroys the Format next to the Frames.
// To avoid this, we disconnect the attribute from the Format.
const SwFormatAnchor& rAnchor = pNewFormat->GetAnchor();
if ( RndStdIds::FLY_AS_CHAR == rAnchor.GetAnchorId() )
{
SwTextNode *pTextNode = rAnchor.GetAnchorNode()->GetTextNode();
OSL_ENSURE( pTextNode->HasHints(), "Missing FlyInCnt-Hint." );
const sal_Int32 nIdx = rAnchor.GetAnchorContentOffset();
SwTextAttr * const pHint =
pTextNode->GetTextAttrForCharAt(nIdx, RES_TXTATR_FLYCNT);
assert(pHint && "Missing Hint.");
OSL_ENSURE( pHint->Which() == RES_TXTATR_FLYCNT,
"Missing FlyInCnt-Hint." );
OSL_ENSURE( pHint->GetFlyCnt().GetFrameFormat() == pOldFormat,
"Wrong TextFlyCnt-Hint." );
const_cast<SwFormatFlyCnt&>(pHint->GetFlyCnt()).SetFlyFormat(
pNewFormat );
}
// The old one should not have a flow and it should be adjusted to above and
// middle.
// Also, the width should be 100% and it should also adjust the height, if changed.
aNewSet.ClearItem();
aNewSet.Put( SwFormatSurround( css::text::WrapTextMode_NONE ) );
aNewSet.Put( SvxOpaqueItem( RES_OPAQUE, true ) );
sal_Int16 eVert = bBefore ? text::VertOrientation::BOTTOM : text::VertOrientation::TOP;
aNewSet.Put( SwFormatVertOrient( 0, eVert ) );
aNewSet.Put( SwFormatHoriOrient( 0, text::HoriOrientation::CENTER ) );
aFrameSize.reset(pOldFormat->GetFrameSize().Clone());
SwOLENode* pOleNode = rDoc.GetNodes()[nNdIdx + 1]->GetOLENode();
bool isMath = false;
if(pOleNode)
{
svt::EmbeddedObjectRef& xRef = pOleNode->GetOLEObj().GetObject();
if(xRef.is())
{
SvGlobalName aCLSID( xRef->getClassID() );
isMath = ( SotExchange::IsMath( aCLSID ) != 0 );
}
}
aFrameSize->SetWidthPercent(isMath ? 0 : 100);
aFrameSize->SetHeightPercent(SwFormatFrameSize::SYNCED);
aNewSet.Put( std::move(aFrameSize) );
// Hard-set the attributes, because they could come from the Template
// and then size calculations could not be correct anymore.
if( bCpyBrd )
{
aNewSet.Put( SvxBoxItem(RES_BOX) );
aNewSet.Put( SvxShadowItem(RES_SHADOW) );
}
aNewSet.Put( SvxLRSpaceItem(RES_LR_SPACE) );
aNewSet.Put( SvxULSpaceItem(RES_UL_SPACE) );
// The old one is paragraph-bound to the paragraph in the new one.
SwFormatAnchor aAnch( RndStdIds::FLY_AT_PARA );
SwNodeIndex aAnchIdx( *pNewFormat->GetContent().GetContentIdx(), 1 );
pNew = aAnchIdx.GetNode().GetTextNode();
SwPosition aPos( aAnchIdx );
aAnch.SetAnchor( &aPos );
aNewSet.Put( aAnch );
if( pUndo )
pUndo->SetFlys( *pOldFormat, aNewSet, *pNewFormat );
else
pOldFormat->SetFormatAttr( aNewSet );
// Have only the FlyFrames created.
// We leave this to established methods (especially for InCntFlys).
pNewFormat->MakeFrames();
// #i115719#
if ( pOldFlyFrameFormat )
{
pOldFlyFrameFormat->SetObjTitle( sTitle );
pOldFlyFrameFormat->SetObjDescription( sDescription );
}
}
break;
default:
OSL_ENSURE(false, "unknown LabelType?");
}
OSL_ENSURE( pNew, "No Label inserted" );
if( pNew )
{
// #i61007# order of captions
bool bOrderNumberingFirst = SW_MOD()->GetModuleConfig()->IsCaptionOrderNumberingFirst();
// Work up OUString
OUString aText;
if( bOrderNumberingFirst )
{
aText = rNumberingSeparator;
}
if( pType)
{
aText += pType->GetName();
if( !bOrderNumberingFirst )
aText += " ";
}
sal_Int32 nIdx = aText.getLength();
if( !rText.empty() )
{
aText += rSeparator;
}
const sal_Int32 nSepIdx = aText.getLength();
aText += rText;
// Insert string
SwContentIndex aIdx( pNew, 0 );
pNew->InsertText( aText, aIdx );
// Insert field
if(pType)
{
SwSetExpField aField( static_cast<SwSetExpFieldType*>(pType), OUString(), SVX_NUM_ARABIC);
if( bOrderNumberingFirst )
nIdx = 0;
SwFormatField aFormat( aField );
pNew->InsertItem( aFormat, nIdx, nIdx );
if(!rCharacterStyle.isEmpty())
{
SwCharFormat* pCharFormat = rDoc.FindCharFormatByName(rCharacterStyle);
if( !pCharFormat )
{
const sal_uInt16 nMyId = SwStyleNameMapper::GetPoolIdFromUIName(rCharacterStyle, SwGetPoolIdFromName::ChrFmt);
pCharFormat = rDoc.getIDocumentStylePoolAccess().GetCharFormatFromPool( nMyId );
}
if (pCharFormat)
{
SwFormatCharFormat aCharFormat( pCharFormat );
pNew->InsertItem( aCharFormat, 0,
nSepIdx + 1, SetAttrMode::DONTEXPAND );
}
}
}
if ( bTable )
{
if ( bBefore )
{
if ( !pNew->GetSwAttrSet().GetKeep().GetValue() )
pNew->SetAttr( SvxFormatKeepItem( true, RES_KEEP ) );
}
else
{
SwTableNode *const pNd =
rDoc.GetNodes()[nNdIdx]->GetStartNode()->GetTableNode();
SwTable &rTable = pNd->GetTable();
if ( !rTable.GetFrameFormat()->GetKeep().GetValue() )
rTable.GetFrameFormat()->SetFormatAttr( SvxFormatKeepItem( true, RES_KEEP ) );
if ( pUndo )
pUndo->SetUndoKeep();
}
}
rDoc.getIDocumentState().SetModified();
}
return pNewFormat;
}
SwFlyFrameFormat *
SwDoc::InsertLabel(
SwLabelType const eType, OUString const& rText, OUString const& rSeparator,
OUString const& rNumberingSeparator,
bool const bBefore, sal_uInt16 const nId, SwNodeOffset const nNdIdx,
OUString const& rCharacterStyle,
bool const bCpyBrd )
{
std::unique_ptr<SwUndoInsertLabel> pUndo;
if (GetIDocumentUndoRedo().DoesUndo())
{
pUndo.reset(new SwUndoInsertLabel(
eType, rText, rSeparator, rNumberingSeparator,
bBefore, nId, rCharacterStyle, bCpyBrd, this ));
}
SwFlyFrameFormat *const pNewFormat = lcl_InsertLabel(*this, mpTextFormatCollTable.get(), pUndo.get(),
eType, rText, rSeparator, rNumberingSeparator, bBefore,
nId, nNdIdx, rCharacterStyle, bCpyBrd);
if (pUndo)
{
GetIDocumentUndoRedo().AppendUndo(std::move(pUndo));
}
else
{
GetIDocumentUndoRedo().DelAllUndoObj();
}
return pNewFormat;
}
static SwFlyFrameFormat *
lcl_InsertDrawLabel( SwDoc & rDoc, SwTextFormatColls *const pTextFormatCollTable,
SwUndoInsertLabel *const pUndo, SwDrawFrameFormat *const pOldFormat,
OUString const& rText,
const OUString& rSeparator,
const OUString& rNumberSeparator,
const sal_uInt16 nId,
const OUString& rCharacterStyle,
SdrObject& rSdrObj )
{
::sw::UndoGuard const undoGuard(rDoc.GetIDocumentUndoRedo());
::sw::DrawUndoGuard const drawUndoGuard(rDoc.GetIDocumentUndoRedo());
// Because we get by the TextColl's name, we need to create the field first.
OSL_ENSURE( nId == USHRT_MAX || nId < rDoc.getIDocumentFieldsAccess().GetFieldTypes()->size(),
"FieldType index out of bounds" );
SwFieldType *pType = nId != USHRT_MAX ? (*rDoc.getIDocumentFieldsAccess().GetFieldTypes())[nId].get() : nullptr;
OSL_ENSURE( !pType || pType->Which() == SwFieldIds::SetExp, "Wrong label id" );
SwTextFormatColl *pColl = nullptr;
if( pType )
{
for( auto i = pTextFormatCollTable->size(); i; )
{
if( (*pTextFormatCollTable)[ --i ]->GetName()==pType->GetName() )
{
pColl = (*pTextFormatCollTable)[i];
break;
}
}
OSL_ENSURE( pColl, "no text collection found" );
}
if( !pColl )
{
pColl = rDoc.getIDocumentStylePoolAccess().GetTextCollFromPool( RES_POOLCOLL_LABEL );
}
SwTextNode* pNew = nullptr;
SwFlyFrameFormat* pNewFormat = nullptr;
// Destroy Frame,
// insert new Frame,
// insert the corresponding Node with Field into the new Frame,
// insert the old Frame with the Object (Picture/OLE) paragraph-bound into the new Frame,
// create Frames.
// Keep layer ID of drawing object before removing
// its frames.
// Note: The layer ID is passed to the undo and have to be the correct value.
// Removing the frames of the drawing object changes its layer.
const SdrLayerID nLayerId = rSdrObj.GetLayer();
pOldFormat->DelFrames();
// InContents need to be treated in a special way:
// The TextAttribute needs to be destroyed.
// Unfortunately, this also destroys the Format next to the Frames.
// To avoid this, we disconnect the attribute from the Format.
SwAttrSet aNewSet = pOldFormat->GetAttrSet().CloneAsValue( false );
// Protect the Frame's size and position
if ( rSdrObj.IsMoveProtect() || rSdrObj.IsResizeProtect() )
{
SvxProtectItem aProtect(RES_PROTECT);
aProtect.SetContentProtect( false );
aProtect.SetPosProtect( rSdrObj.IsMoveProtect() );
aProtect.SetSizeProtect( rSdrObj.IsResizeProtect() );
aNewSet.Put( aProtect );
}
// Take over the text wrap
lcl_CpyAttr( aNewSet, pOldFormat->GetAttrSet(), RES_SURROUND );
// Send the frame to the back, if needed.
// Consider the 'invisible' hell layer.
if ( rDoc.getIDocumentDrawModelAccess().GetHellId() != nLayerId &&
rDoc.getIDocumentDrawModelAccess().GetInvisibleHellId() != nLayerId )
{
SvxOpaqueItem aOpaque( RES_OPAQUE );
aOpaque.SetValue( true );
aNewSet.Put( aOpaque );
}
// Take over position
// #i26791# - use directly drawing object's positioning attributes
aNewSet.Put( pOldFormat->GetHoriOrient() );
aNewSet.Put( pOldFormat->GetVertOrient() );
aNewSet.Put( pOldFormat->GetAnchor() );
// The new one should be variable in its height!
Size aSz( rSdrObj.GetCurrentBoundRect().GetSize() );
SwFormatFrameSize aFrameSize( SwFrameSize::Minimum, aSz.Width(), aSz.Height() );
aNewSet.Put( aFrameSize );
// Apply the margin to the new Frame.
// Don't set a border, use the one from the Template.
aNewSet.Put( pOldFormat->GetLRSpace() );
aNewSet.Put( pOldFormat->GetULSpace() );
SwStartNode* pSttNd =
rDoc.GetNodes().MakeTextSection(
rDoc.GetNodes().GetEndOfAutotext(),
SwFlyStartNode, pColl );
pNewFormat = rDoc.MakeFlyFrameFormat( rDoc.GetUniqueFrameName(),
rDoc.getIDocumentStylePoolAccess().GetFrameFormatFromPool( RES_POOLFRM_FRAME ) );
// Set border and shadow to default if the template contains any.
if( SfxItemState::SET == pNewFormat->GetAttrSet().GetItemState( RES_BOX ))
aNewSet.Put( *GetDfltAttr( RES_BOX ) );
if( SfxItemState::SET == pNewFormat->GetAttrSet().GetItemState(RES_SHADOW))
aNewSet.Put( *GetDfltAttr( RES_SHADOW ) );
pNewFormat->SetFormatAttr( SwFormatContent( pSttNd ));
pNewFormat->SetFormatAttr( aNewSet );
const SwFormatAnchor& rAnchor = pNewFormat->GetAnchor();
if ( RndStdIds::FLY_AS_CHAR == rAnchor.GetAnchorId() )
{
SwTextNode *pTextNode = rAnchor.GetAnchorNode()->GetTextNode();
OSL_ENSURE( pTextNode->HasHints(), "Missing FlyInCnt-Hint." );
const sal_Int32 nIdx = rAnchor.GetAnchorContentOffset();
SwTextAttr * const pHint =
pTextNode->GetTextAttrForCharAt( nIdx, RES_TXTATR_FLYCNT );
assert(pHint && "Missing Hint.");
#if OSL_DEBUG_LEVEL > 0
OSL_ENSURE( pHint->Which() == RES_TXTATR_FLYCNT,
"Missing FlyInCnt-Hint." );
OSL_ENSURE( pHint->GetFlyCnt().
GetFrameFormat() == static_cast<SwFrameFormat*>(pOldFormat),
"Wrong TextFlyCnt-Hint." );
#endif
const_cast<SwFormatFlyCnt&>(pHint->GetFlyCnt()).SetFlyFormat( pNewFormat );
}
// The old one should not have a flow
// and it should be adjusted to above and middle.
aNewSet.ClearItem();
aNewSet.Put( SwFormatSurround( css::text::WrapTextMode_NONE ) );
if (nLayerId == rDoc.getIDocumentDrawModelAccess().GetHellId())
{
// Consider drawing objects in the 'invisible' hell layer
rSdrObj.SetLayer( rDoc.getIDocumentDrawModelAccess().GetHeavenId() );
}
else if (nLayerId == rDoc.getIDocumentDrawModelAccess().GetInvisibleHellId())
{
rSdrObj.SetLayer( rDoc.getIDocumentDrawModelAccess().GetInvisibleHeavenId() );
}
aNewSet.Put( SvxLRSpaceItem( RES_LR_SPACE ) );
aNewSet.Put( SvxULSpaceItem( RES_UL_SPACE ) );
// #i26791# - set position of the drawing object, which is labeled.
aNewSet.Put( SwFormatVertOrient( 0, text::VertOrientation::TOP, text::RelOrientation::FRAME ) );
aNewSet.Put( SwFormatHoriOrient( 0, text::HoriOrientation::CENTER, text::RelOrientation::FRAME ) );
// The old one is paragraph-bound to the new one's paragraph.
SwFormatAnchor aAnch( RndStdIds::FLY_AT_PARA );
SwNodeIndex aAnchIdx( *pNewFormat->GetContent().GetContentIdx(), 1 );
pNew = aAnchIdx.GetNode().GetTextNode();
SwPosition aPos( aAnchIdx );
aAnch.SetAnchor( &aPos );
aNewSet.Put( aAnch );
if( pUndo )
{
pUndo->SetFlys( *pOldFormat, aNewSet, *pNewFormat );
// #i26791# - position no longer needed
pUndo->SetDrawObj( nLayerId );
}
else
pOldFormat->SetFormatAttr( aNewSet );
// Have only the FlyFrames created.
// We leave this to established methods (especially for InCntFlys).
pNewFormat->MakeFrames();
OSL_ENSURE( pNew, "No Label inserted" );
if( pNew )
{
//#i61007# order of captions
bool bOrderNumberingFirst = SW_MOD()->GetModuleConfig()->IsCaptionOrderNumberingFirst();
// prepare string
OUString aText;
if( bOrderNumberingFirst )
{
aText = rNumberSeparator;
}
if ( pType )
{
aText += pType->GetName();
if( !bOrderNumberingFirst )
aText += " ";
}
sal_Int32 nIdx = aText.getLength();
aText += rSeparator;
const sal_Int32 nSepIdx = aText.getLength();
aText += rText;
// insert text
SwContentIndex aIdx( pNew, 0 );
pNew->InsertText( aText, aIdx );
// insert field
if ( pType )
{
SwSetExpField aField( static_cast<SwSetExpFieldType*>(pType), OUString(), SVX_NUM_ARABIC );
if( bOrderNumberingFirst )
nIdx = 0;
SwFormatField aFormat( aField );
pNew->InsertItem( aFormat, nIdx, nIdx );
if ( !rCharacterStyle.isEmpty() )
{
SwCharFormat * pCharFormat = rDoc.FindCharFormatByName(rCharacterStyle);
if ( !pCharFormat )
{
const sal_uInt16 nMyId = SwStyleNameMapper::GetPoolIdFromUIName( rCharacterStyle, SwGetPoolIdFromName::ChrFmt );
pCharFormat = rDoc.getIDocumentStylePoolAccess().GetCharFormatFromPool( nMyId );
}
if ( pCharFormat )
{
SwFormatCharFormat aCharFormat( pCharFormat );
pNew->InsertItem( aCharFormat, 0, nSepIdx + 1,
SetAttrMode::DONTEXPAND );
}
}
}
}
return pNewFormat;
}
SwFlyFrameFormat* SwDoc::InsertDrawLabel(
OUString const& rText,
OUString const& rSeparator,
OUString const& rNumberSeparator,
sal_uInt16 const nId,
OUString const& rCharacterStyle,
SdrObject& rSdrObj )
{
SwDrawContact *const pContact =
static_cast<SwDrawContact*>(GetUserCall( &rSdrObj ));
if (!pContact)
return nullptr;
OSL_ENSURE( RES_DRAWFRMFMT == pContact->GetFormat()->Which(),
"InsertDrawLabel(): not a DrawFrameFormat" );
SwDrawFrameFormat* pOldFormat = static_cast<SwDrawFrameFormat*>(pContact->GetFormat());
if (!pOldFormat)
return nullptr;
std::unique_ptr<SwUndoInsertLabel> pUndo;
if (GetIDocumentUndoRedo().DoesUndo())
{
GetIDocumentUndoRedo().ClearRedo();
pUndo.reset(new SwUndoInsertLabel(
SwLabelType::Draw, rText, rSeparator, rNumberSeparator, false,
nId, rCharacterStyle, false, this ));
}
SwFlyFrameFormat *const pNewFormat = lcl_InsertDrawLabel(
*this, mpTextFormatCollTable.get(), pUndo.get(), pOldFormat,
rText, rSeparator, rNumberSeparator, nId, rCharacterStyle, rSdrObj);
if (pUndo)
{
GetIDocumentUndoRedo().AppendUndo( std::move(pUndo) );
}
else
{
GetIDocumentUndoRedo().DelAllUndoObj();
}
return pNewFormat;
}
static void lcl_collectUsedNums(std::vector<unsigned int>& rSetFlags, sal_Int32 nNmLen, std::u16string_view rName, std::u16string_view rCmpName)
{
if (o3tl::starts_with(rName, rCmpName))
{
// Only get and set the Flag
const sal_Int32 nNum = o3tl::toInt32(rName.substr(nNmLen)) - 1;
if (nNum >= 0)
rSetFlags.push_back(nNum);
}
}
static void lcl_collectUsedNums(std::vector<unsigned int>& rSetFlags, sal_Int32 nNmLen, const SdrObject& rObj, const OUString& rCmpName)
{
const OUString& sName = rObj.GetName();
lcl_collectUsedNums(rSetFlags, nNmLen, sName, rCmpName);
// tdf#122487 take groups into account, iterate and recurse through their
// contents for name collision check
if (!rObj.IsGroupObject())
return;
const SdrObjList* pSub(rObj.GetSubList());
assert(pSub && "IsGroupObject is implemented as GetSubList != nullptr");
for (const rtl::Reference<SdrObject>& pObj : *pSub)
{
lcl_collectUsedNums(rSetFlags, nNmLen, *pObj, rCmpName);
}
}
namespace
{
int first_available_number(std::vector<unsigned int>& numbers)
{
std::sort(numbers.begin(), numbers.end());
auto last = std::unique(numbers.begin(), numbers.end());
numbers.erase(last, numbers.end());
for (size_t i = 0; i < numbers.size(); ++i)
{
if (numbers[i] != i)
return i;
}
return numbers.size();
}
}
static OUString lcl_GetUniqueFlyName(const SwDoc& rDoc, TranslateId pDefStrId, sal_uInt16 eType, std::u16string_view rPrefix = std::u16string_view(), SwNodeType nNdTyp = SwNodeType::NONE)
{
assert(eType >= RES_FMT_BEGIN && eType < RES_FMT_END);
if (rDoc.IsInMailMerge())
{
OUString newName = "MailMergeFly"
+ DateTimeToOUString( DateTime( DateTime::SYSTEM ) )
+ OUString::number( rDoc.GetSpzFrameFormats()->size() + 1 );
return newName;
}
if (!rPrefix.empty())
{
// Generate a name that makes it possible to know this is a copy of which original name,
// e.g. 'Picture 1 Copy 1'.
assert(nNdTyp != SwNodeType::NONE);
sal_Int32 nCnt = 1;
OUString aPrefix = SwResId(STR_MARK_COPY).replaceFirst("%1", rPrefix);
OUString aTmp;
while(nCnt < SAL_MAX_INT32)
{
aTmp = aPrefix + OUString::number(nCnt);
++nCnt;
if (!rDoc.FindFlyByName(aTmp, nNdTyp))
{
break;
}
}
return aTmp;
}
OUString aName(SwResId(pDefStrId));
sal_Int32 nNmLen = aName.getLength();
std::vector<unsigned int> aUsedNums;
aUsedNums.reserve(rDoc.GetSpzFrameFormats()->size());
for(sw::SpzFrameFormat* pFlyFormat: *rDoc.GetSpzFrameFormats())
{
if (eType != pFlyFormat->Which())
continue;
if (eType == RES_DRAWFRMFMT)
{
const SdrObject *pObj = pFlyFormat->FindSdrObject();
if (pObj)
lcl_collectUsedNums(aUsedNums, nNmLen, *pObj, aName);
}
lcl_collectUsedNums(aUsedNums, nNmLen, pFlyFormat->GetName(), aName);
}
// All numbers are flagged accordingly, so determine the right one
auto nNum = first_available_number(aUsedNums) + 1;
return aName + OUString::number(nNum);
}
OUString SwDoc::GetUniqueGrfName(std::u16string_view rPrefix) const
{
return lcl_GetUniqueFlyName(*this, STR_GRAPHIC_DEFNAME, RES_FLYFRMFMT, rPrefix, SwNodeType::Grf);
}
OUString SwDoc::GetUniqueOLEName() const
{
return lcl_GetUniqueFlyName(*this, STR_OBJECT_DEFNAME, RES_FLYFRMFMT);
}
OUString SwDoc::GetUniqueFrameName() const
{
return lcl_GetUniqueFlyName(*this, STR_FRAME_DEFNAME, RES_FLYFRMFMT);
}
OUString SwDoc::GetUniqueShapeName() const
{
return lcl_GetUniqueFlyName(*this, STR_SHAPE_DEFNAME, RES_DRAWFRMFMT);
}
OUString SwDoc::GetUniqueDrawObjectName() const
{
return lcl_GetUniqueFlyName(*this, TranslateId(nullptr, "DrawObject"), RES_DRAWFRMFMT);
}
const SwFlyFrameFormat* SwDoc::FindFlyByName( const OUString& rName, SwNodeType nNdTyp ) const
{
auto it = GetSpzFrameFormats()->findByTypeAndName( RES_FLYFRMFMT, rName );
if( it == GetSpzFrameFormats()->typeAndNameEnd() )
return nullptr;
const SwFrameFormat* pFlyFormat = *it;
assert( RES_FLYFRMFMT == pFlyFormat->Which() && pFlyFormat->GetName() == rName );
const SwNodeIndex* pIdx = pFlyFormat->GetContent().GetContentIdx();
if( pIdx && pIdx->GetNode().GetNodes().IsDocNodes() )
{
if( nNdTyp != SwNodeType::NONE )
{
// query for the right NodeType
const SwNode* pNd = GetNodes()[ pIdx->GetIndex()+1 ];
if( nNdTyp == SwNodeType::Text
? !pNd->IsNoTextNode()
: nNdTyp == pNd->GetNodeType() )
return static_cast<const SwFlyFrameFormat*>(pFlyFormat);
}
else
return static_cast<const SwFlyFrameFormat*>(pFlyFormat);
}
return nullptr;
}
void SwDoc::SetFlyName( SwFlyFrameFormat& rFormat, const OUString& rName )
{
if (rFormat.GetName() == rName)
{
return;
}
OUString sName( rName );
if( sName.isEmpty() || FindFlyByName( sName ) )
{
TranslateId pTyp = STR_FRAME_DEFNAME;
const SwNodeIndex* pIdx = rFormat.GetContent().GetContentIdx();
if( pIdx && pIdx->GetNode().GetNodes().IsDocNodes() )
{
switch( GetNodes()[ pIdx->GetIndex() + 1 ]->GetNodeType() )
{
case SwNodeType::Grf:
pTyp = STR_GRAPHIC_DEFNAME;
break;
case SwNodeType::Ole:
pTyp = STR_OBJECT_DEFNAME;
break;
default: break;
}
}
sName = lcl_GetUniqueFlyName(*this, pTyp, RES_FLYFRMFMT);
}
rFormat.SetFormatName( sName, true );
getIDocumentState().SetModified();
}
void SwDoc::SetAllUniqueFlyNames()
{
sal_Int32 n, nFlyNum = 0, nGrfNum = 0, nOLENum = 0;
const OUString sFlyNm(SwResId(STR_FRAME_DEFNAME));
const OUString sGrfNm(SwResId(STR_GRAPHIC_DEFNAME));
const OUString sOLENm(SwResId(STR_OBJECT_DEFNAME));
n = GetSpzFrameFormats()->size();
if( 255 < n )
n = 255;
SwFrameFormatsV aArr;
aArr.reserve( n );
SwFrameFormat* pFlyFormat;
bool bContainsAtPageObjWithContentAnchor = false;
for( n = GetSpzFrameFormats()->size(); n; )
{
pFlyFormat = (*GetSpzFrameFormats())[ --n ];
if( RES_FLYFRMFMT == pFlyFormat->Which() )
{
const OUString& aNm = pFlyFormat->GetName();
if ( !aNm.isEmpty() )
{
sal_Int32 *pNum = nullptr;
sal_Int32 nLen = 0;
if ( aNm.startsWith(sGrfNm) )
{
nLen = sGrfNm.getLength();
pNum = &nGrfNum;
}
else if( aNm.startsWith(sFlyNm) )
{
nLen = sFlyNm.getLength();
pNum = &nFlyNum;
}
else if( aNm.startsWith(sOLENm) )
{
nLen = sOLENm.getLength();
pNum = &nOLENum;
}
if ( pNum )
{
const sal_Int32 nNewLen = o3tl::toInt32(aNm.subView( nLen ));
if (*pNum < nNewLen)
*pNum = nNewLen;
}
}
else
// we want to set that afterwards
aArr.push_back( pFlyFormat );
}
if ( !bContainsAtPageObjWithContentAnchor )
{
const SwFormatAnchor& rAnchor = pFlyFormat->GetAnchor();
if ( (RndStdIds::FLY_AT_PAGE == rAnchor.GetAnchorId()) &&
rAnchor.GetAnchorNode() )
{
bContainsAtPageObjWithContentAnchor = true;
}
}
}
SetContainsAtPageObjWithContentAnchor( bContainsAtPageObjWithContentAnchor );
for( n = aArr.size(); n; )
{
pFlyFormat = aArr[ --n ];
const SwNodeIndex* pIdx = pFlyFormat->GetContent().GetContentIdx();
if( pIdx && pIdx->GetNode().GetNodes().IsDocNodes() )
{
switch( GetNodes()[ pIdx->GetIndex() + 1 ]->GetNodeType() )
{
case SwNodeType::Grf:
pFlyFormat->SetFormatName( sGrfNm + OUString::number( ++nGrfNum ));
break;
case SwNodeType::Ole:
pFlyFormat->SetFormatName( sOLENm + OUString::number( ++nOLENum ));
break;
default:
pFlyFormat->SetFormatName( sFlyNm + OUString::number( ++nFlyNum ));
break;
}
}
}
aArr.clear();
if( GetFootnoteIdxs().empty() )
return;
SwTextFootnote::SetUniqueSeqRefNo( *this );
// #i52775# Chapter footnotes did not get updated correctly.
// Calling UpdateAllFootnote() instead of UpdateFootnote() solves this problem,
// but I do not dare to call UpdateAllFootnote() in all cases: Safety first.
if ( FTNNUM_CHAPTER == GetFootnoteInfo().m_eNum )
{
GetFootnoteIdxs().UpdateAllFootnote();
}
else
{
SwNodeIndex aTmp( GetNodes() );
GetFootnoteIdxs().UpdateFootnote( aTmp.GetNode() );
}
}
bool SwDoc::IsInHeaderFooter( const SwNode& rIdx ) const
{
// That can also be a Fly in a Fly in the Header.
// Is also used by sw3io, to determine if a Redline object is
// in the Header or Footer.
// Because Redlines are also attached to Start and EndNode,
// the Index must not necessarily be from a ContentNode.
const SwNode* pNd = &rIdx;
const SwNode* pFlyNd = pNd->FindFlyStartNode();
while( pFlyNd )
{
// get up by using the Anchor
#if OSL_DEBUG_LEVEL > 0
std::vector<const SwFrameFormat*> checkFormats;
for(sw::SpzFrameFormat* pFormat: *GetSpzFrameFormats())
{
const SwNodeIndex* pIdx = pFormat->GetContent().GetContentIdx();
if( pIdx && pFlyNd == &pIdx->GetNode() )
checkFormats.push_back( pFormat );
}
#endif
std::vector<SwFrameFormat*> const & rFlys(pFlyNd->GetAnchoredFlys());
bool bFound(false);
for (size_t i = 0; i < rFlys.size(); ++i)
{
const SwFrameFormat *const pFormat = rFlys[i];
const SwNodeIndex* pIdx = pFormat->GetContent().GetContentIdx();
if( pIdx && pFlyNd == &pIdx->GetNode() )
{
#if OSL_DEBUG_LEVEL > 0
auto checkPos = std::find(
checkFormats.begin(), checkFormats.end(), pFormat );
assert( checkPos != checkFormats.end());
checkFormats.erase( checkPos );
#endif
const SwFormatAnchor& rAnchor = pFormat->GetAnchor();
if ((RndStdIds::FLY_AT_PAGE == rAnchor.GetAnchorId()) ||
!rAnchor.GetAnchorNode() )
{
return false;
}
pNd = rAnchor.GetAnchorNode();
pFlyNd = pNd->FindFlyStartNode();
bFound = true;
break;
}
}
if (!bFound)
{
OSL_ENSURE(mbInReading, "Found a FlySection but not a Format!");
return false;
}
}
return nullptr != pNd->FindHeaderStartNode() ||
nullptr != pNd->FindFooterStartNode();
}
SvxFrameDirection SwDoc::GetTextDirection( const SwPosition& rPos,
const Point* pPt ) const
{
SvxFrameDirection nRet = SvxFrameDirection::Unknown;
SwContentNode *pNd = rPos.GetNode().GetContentNode();
// #i42921# - use new method <SwContentNode::GetTextDirection(..)>
if ( pNd )
{
nRet = pNd->GetTextDirection( rPos, pPt );
}
if ( nRet == SvxFrameDirection::Unknown )
{
const SvxFrameDirectionItem* pItem = nullptr;
if( pNd )
{
// Are we in a FlyFrame? Then look at that for the correct attribute
const SwFrameFormat* pFlyFormat = pNd->GetFlyFormat();
while( pFlyFormat )
{
pItem = &pFlyFormat->GetFrameDir();
if( SvxFrameDirection::Environment == pItem->GetValue() )
{
pItem = nullptr;
const SwFormatAnchor* pAnchor = &pFlyFormat->GetAnchor();
if ((RndStdIds::FLY_AT_PAGE != pAnchor->GetAnchorId()) &&
pAnchor->GetAnchorNode())
{
pFlyFormat = pAnchor->GetAnchorNode()->GetFlyFormat();
}
else
pFlyFormat = nullptr;
}
else
pFlyFormat = nullptr;
}
if( !pItem )
{
const SwPageDesc* pPgDsc = pNd->FindPageDesc();
if( pPgDsc )
pItem = &pPgDsc->GetMaster().GetFrameDir();
}
}
if( !pItem )
pItem = &GetAttrPool().GetUserOrPoolDefaultItem( RES_FRAMEDIR );
nRet = pItem->GetValue();
}
return nRet;
}
bool SwDoc::IsInVerticalText( const SwPosition& rPos ) const
{
const SvxFrameDirection nDir = GetTextDirection( rPos );
return SvxFrameDirection::Vertical_RL_TB == nDir || SvxFrameDirection::Vertical_LR_TB == nDir;
}
o3tl::sorted_vector<SwRootFrame*> SwDoc::GetAllLayouts()
{
o3tl::sorted_vector<SwRootFrame*> aAllLayouts;
SwViewShell *pStart = getIDocumentLayoutAccess().GetCurrentViewShell();
if(pStart)
{
for(const SwViewShell& rShell : pStart->GetRingContainer())
{
if(rShell.GetLayout())
aAllLayouts.insert(rShell.GetLayout());
}
}
return aAllLayouts;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'InsertText' is required to be utilized.
↑ V530 The return value of function 'InsertText' is required to be utilized.