docshini.cxx

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include <hintids.hxx> #include <osl/diagnose.h> #include <sal/log.hxx> #include <i18nlangtag/languagetag.hxx> #include <i18nlangtag/mslangid.hxx> #include <svtools/ctrltool.hxx> #include <unotools/configmgr.hxx> #include <unotools/lingucfg.hxx> #include <sfx2/docfile.hxx> #include <sfx2/sfxmodelfactory.hxx> #include <sfx2/printer.hxx> #include <svl/asiancfg.hxx> #include <svl/intitem.hxx> #include <editeng/adjustitem.hxx> #include <editeng/autokernitem.hxx> #include <com/sun/star/document/UpdateDocMode.hpp> #include <com/sun/star/i18n/ScriptType.hpp> #include <svx/compatflags.hxx> #include <svx/svxids.hrc> #include <editeng/fhgtitem.hxx> #include <editeng/fontitem.hxx> #include <editeng/flstitem.hxx> #include <editeng/tstpitem.hxx> #include <editeng/langitem.hxx> #include <editeng/colritem.hxx> #include <editeng/orphitem.hxx> #include <editeng/widwitem.hxx> #include <editeng/hyphenzoneitem.hxx> #include <vcl/svapp.hxx> #include <vcl/settings.hxx> #include <prtopt.hxx> #include <fmtcol.hxx> #include <docsh.hxx> #include <wdocsh.hxx> #include <swmodule.hxx> #include <doc.hxx> #include <IDocumentSettingAccess.hxx> #include <IDocumentDeviceAccess.hxx> #include <IDocumentDrawModelAccess.hxx> #include <IDocumentStylePoolAccess.hxx> #include <IDocumentChartDataProviderAccess.hxx> #include <IDocumentState.hxx> #include <docfac.hxx> #include <docstyle.hxx> #include <shellio.hxx> #include <swdtflvr.hxx> #include <usrpref.hxx> #include <fontcfg.hxx> #include <poolfmt.hxx> #include <globdoc.hxx> #include <unotxdoc.hxx> #include <linkenum.hxx> #include <swwait.hxx> #include <swerror.h> #include <unochart.hxx> #include <drawdoc.hxx> #include <svx/CommonStyleManager.hxx> #include <memory> #include <officecfg/Office/Common.hxx> using namespace ::com::sun::star::i18n; using namespace ::com::sun::star::lang; using namespace ::com::sun::star::uno; using namespace ::com::sun::star; // Load Document bool SwDocShell::InitNew( const uno::Reference < embed::XStorage >& xStor ) { bool bRet = SfxObjectShell::InitNew( xStor ); OSL_ENSURE( GetMapUnit() == MapUnit::MapTwip, "map unit is not twip!" ); bool bHTMLTemplSet = false; if( bRet ) { AddLink(); // create m_xDoc / pIo if applicable bool bWeb = dynamic_cast< const SwWebDocShell *>( this ) != nullptr; if ( bWeb ) bHTMLTemplSet = SetHTMLTemplate( *GetDoc() );// Styles from HTML.vor else if( dynamic_cast< const SwGlobalDocShell *>( this ) != nullptr ) GetDoc()->getIDocumentSettingAccess().set(DocumentSettingId::GLOBAL_DOCUMENT, true); // Globaldokument if ( GetCreateMode() == SfxObjectCreateMode::EMBEDDED ) SwTransferable::InitOle( this ); SwModule* mod = SwModule::get(); // set forbidden characters if necessary const bool bFuzzing = comphelper::IsFuzzing(); if (!bFuzzing) { const Sequence<lang::Locale> aLocales = SvxAsianConfig::GetStartEndCharLocales(); for(const lang::Locale& rLocale : aLocales) { ForbiddenCharacters aForbidden; SvxAsianConfig::GetStartEndChars( rLocale, aForbidden.beginLine, aForbidden.endLine); LanguageType eLang = LanguageTag::convertToLanguageType(rLocale); m_xDoc->getIDocumentSettingAccess().setForbiddenCharacters( eLang, aForbidden); } m_xDoc->getIDocumentSettingAccess().set(DocumentSettingId::KERN_ASIAN_PUNCTUATION, !SvxAsianConfig::IsKerningWesternTextOnly()); m_xDoc->getIDocumentSettingAccess().setCharacterCompressionType(SvxAsianConfig::GetCharDistanceCompression()); m_xDoc->getIDocumentDeviceAccess().setPrintData(*mod->GetPrtOptions(bWeb)); } SubInitNew(); // for all SwStdFontConfig* pStdFont = mod->GetStdFontConfig(); SfxPrinter* pPrt = m_xDoc->getIDocumentDeviceAccess().getPrinter( false ); OUString sEntry; static const sal_uInt16 aFontWhich[] = { RES_CHRATR_FONT, RES_CHRATR_CJK_FONT, RES_CHRATR_CTL_FONT }; static const sal_uInt16 aFontHeightWhich[] = { RES_CHRATR_FONTSIZE, RES_CHRATR_CJK_FONTSIZE, RES_CHRATR_CTL_FONTSIZE }; static const sal_uInt16 aFontIds[] = { FONT_STANDARD, FONT_STANDARD_CJK, FONT_STANDARD_CTL }; static const DefaultFontType nFontTypes[] = { DefaultFontType::LATIN_TEXT, DefaultFontType::CJK_TEXT, DefaultFontType::CTL_TEXT }; static const sal_uInt16 aLangTypes[] = { RES_CHRATR_LANGUAGE, RES_CHRATR_CJK_LANGUAGE, RES_CHRATR_CTL_LANGUAGE }; for(sal_uInt8 i = 0; i < 3; i++) { sal_uInt16 nFontWhich = aFontWhich[i]; sal_uInt16 nFontId = aFontIds[i]; std::unique_ptr<SvxFontItem> pFontItem; const SvxLanguageItem& rLang = static_cast<const SvxLanguageItem&>(m_xDoc->GetDefault( aLangTypes[i] )); LanguageType eLanguage = rLang.GetLanguage(); if(!pStdFont->IsFontDefault(nFontId)) { sEntry = pStdFont->GetFontFor(nFontId); vcl::Font aFont( sEntry, Size( 0, 10 ) ); if( pPrt ) { aFont = pPrt->GetFontMetric( aFont ); } pFontItem.reset(new SvxFontItem(aFont.GetFamilyTypeMaybeAskConfig(), aFont.GetFamilyName(), OUString(), aFont.GetPitchMaybeAskConfig(), aFont.GetCharSet(), nFontWhich)); } else { // #107782# OJ use korean language if latin was used if ( i == 0 ) { LanguageType eUiLanguage = Application::GetSettings().GetUILanguageTag().getLanguageType(); if (MsLangId::isKorean(eUiLanguage)) eLanguage = eUiLanguage; } vcl::Font aLangDefFont = OutputDevice::GetDefaultFont( nFontTypes[i], eLanguage, GetDefaultFontFlags::OnlyOne ); pFontItem.reset(new SvxFontItem(aLangDefFont.GetFamilyTypeMaybeAskConfig(), aLangDefFont.GetFamilyName(), OUString(), aLangDefFont.GetPitchMaybeAskConfig(), aLangDefFont.GetCharSet(), nFontWhich)); } m_xDoc->SetDefault(*pFontItem); if( !bHTMLTemplSet ) { SwTextFormatColl *pColl = m_xDoc->getIDocumentStylePoolAccess().GetTextCollFromPool(RES_POOLCOLL_STANDARD); pColl->ResetFormatAttr(nFontWhich); } pFontItem.reset(); sal_Int32 nFontHeight = pStdFont->GetFontHeight( FONT_STANDARD, i, eLanguage ); if(nFontHeight <= 0) nFontHeight = SwStdFontConfig::GetDefaultHeightFor( nFontId, eLanguage ); m_xDoc->SetDefault(SvxFontHeightItem( nFontHeight, 100, aFontHeightWhich[i] )); if( !bHTMLTemplSet ) { SwTextFormatColl *pColl = m_xDoc->getIDocumentStylePoolAccess().GetTextCollFromPool(RES_POOLCOLL_STANDARD); pColl->ResetFormatAttr(aFontHeightWhich[i]); } } sal_uInt16 aFontIdPoolId[] = { FONT_OUTLINE, RES_POOLCOLL_HEADLINE_BASE, FONT_LIST, RES_POOLCOLL_NUMBER_BULLET_BASE, FONT_CAPTION, RES_POOLCOLL_LABEL, FONT_INDEX, RES_POOLCOLL_REGISTER_BASE, FONT_OUTLINE_CJK, RES_POOLCOLL_HEADLINE_BASE, FONT_LIST_CJK, RES_POOLCOLL_NUMBER_BULLET_BASE, FONT_CAPTION_CJK, RES_POOLCOLL_LABEL, FONT_INDEX_CJK, RES_POOLCOLL_REGISTER_BASE, FONT_OUTLINE_CTL, RES_POOLCOLL_HEADLINE_BASE, FONT_LIST_CTL, RES_POOLCOLL_NUMBER_BULLET_BASE, FONT_CAPTION_CTL, RES_POOLCOLL_LABEL, FONT_INDEX_CTL, RES_POOLCOLL_REGISTER_BASE }; TypedWhichId<SvxFontItem> nFontWhich = RES_CHRATR_FONT; TypedWhichId<SvxFontHeightItem> nFontHeightWhich = RES_CHRATR_FONTSIZE; LanguageType eLanguage = m_xDoc->GetDefault( RES_CHRATR_LANGUAGE ).GetLanguage(); bool bDisableBuiltinStyles = !bFuzzing && officecfg::Office::Common::Load::DisableBuiltinStyles::get(); sal_uInt8 nLimit = bDisableBuiltinStyles ? 0 : 24; for(sal_uInt8 nIdx = 0; nIdx < nLimit; nIdx += 2) { if(nIdx == 8) { nFontWhich = RES_CHRATR_CJK_FONT; nFontHeightWhich = RES_CHRATR_CJK_FONTSIZE; eLanguage = m_xDoc->GetDefault( RES_CHRATR_CJK_LANGUAGE ).GetLanguage(); } else if(nIdx == 16) { nFontWhich = RES_CHRATR_CTL_FONT; nFontHeightWhich = RES_CHRATR_CTL_FONTSIZE; eLanguage = m_xDoc->GetDefault( RES_CHRATR_CTL_LANGUAGE ).GetLanguage(); } SwTextFormatColl *pColl = nullptr; if(!pStdFont->IsFontDefault(aFontIdPoolId[nIdx])) { sEntry = pStdFont->GetFontFor(aFontIdPoolId[nIdx]); vcl::Font aFont( sEntry, Size( 0, 10 ) ); if( pPrt ) aFont = pPrt->GetFontMetric( aFont ); pColl = m_xDoc->getIDocumentStylePoolAccess().GetTextCollFromPool(aFontIdPoolId[nIdx + 1]); assert(pColl); if( !bHTMLTemplSet || SfxItemState::SET != pColl->GetAttrSet().GetItemState( nFontWhich, false ) ) { pColl->SetFormatAttr(SvxFontItem(aFont.GetFamilyTypeMaybeAskConfig(), aFont.GetFamilyName(), OUString(), aFont.GetPitchMaybeAskConfig(), aFont.GetCharSet(), nFontWhich)); } } sal_Int32 nFontHeight = pStdFont->GetFontHeight( static_cast< sal_Int8 >(aFontIdPoolId[nIdx]), 0, eLanguage ); if(nFontHeight <= 0) nFontHeight = SwStdFontConfig::GetDefaultHeightFor( aFontIdPoolId[nIdx], eLanguage ); if(!pColl) pColl = m_xDoc->getIDocumentStylePoolAccess().GetTextCollFromPool(aFontIdPoolId[nIdx + 1]); SvxFontHeightItem aFontHeight( pColl->GetFormatAttr( nFontHeightWhich ) ); if(aFontHeight.GetHeight() != sal::static_int_cast<sal_uInt32, sal_Int32>(nFontHeight)) { aFontHeight.SetHeight(nFontHeight); pColl->SetFormatAttr( aFontHeight ); } } // the default for documents created via 'File/New' should be 'on' // (old documents, where this property was not yet implemented, will get the // value 'false' in the SwDoc c-tor) m_xDoc->getIDocumentSettingAccess().set( DocumentSettingId::MATH_BASELINE_ALIGNMENT, mod->GetUsrPref( bWeb )->IsAlignMathObjectsToBaseline() ); m_xDoc->getIDocumentSettingAccess().set( DocumentSettingId::FOOTNOTE_IN_COLUMN_TO_PAGEEND, true); } /* #106748# If the default frame direction of a document is RTL the default adjustment is to the right. */ if( !bHTMLTemplSet && SvxFrameDirection::Horizontal_RL_TB == GetDefaultFrameDirection(GetAppLanguage()) ) { m_xDoc->SetDefault( SvxAdjustItem(SvxAdjust::Right, RES_PARATR_ADJUST ) ); } // #i29550# m_xDoc->SetDefault( SfxBoolItem( RES_COLLAPSING_BORDERS, true ) ); // <-- collapsing //#i16874# AutoKerning as default for new documents m_xDoc->SetDefault( SvxAutoKernItem( true, RES_CHRATR_AUTOKERN ) ); // #i42080# - Due to the several calls of method <SetDefault(..)> // at the document instance, the document is modified. Thus, reset this // status here. Note: In method <SubInitNew()> this is also done. m_xDoc->getIDocumentState().ResetModified(); return bRet; } // Ctor with SfxCreateMode ????? SwDocShell::SwDocShell( SfxObjectCreateMode const eMode ) : SfxObjectShell(eMode) , m_IsInUpdateFontList(false) , m_pStyleManager(new svx::CommonStyleManager(*this)) , m_pView(nullptr) , m_pWrtShell(nullptr) , m_nUpdateDocMode(document::UpdateDocMode::ACCORDING_TO_CONFIG) , m_IsATemplate(false) , m_IsRemovedInvisibleContent(false) { Init_Impl(); } // Ctor / Dtor SwDocShell::SwDocShell( const SfxModelFlags i_nSfxCreationFlags ) : SfxObjectShell ( i_nSfxCreationFlags ) , m_IsInUpdateFontList(false) , m_pStyleManager(new svx::CommonStyleManager(*this)) , m_pView(nullptr) , m_pWrtShell(nullptr) , m_nUpdateDocMode(document::UpdateDocMode::ACCORDING_TO_CONFIG) , m_IsATemplate(false) , m_IsRemovedInvisibleContent(false) { Init_Impl(); } // Ctor / Dtor SwDocShell::SwDocShell( SwDoc& rD, SfxObjectCreateMode const eMode ) : SfxObjectShell(eMode) , m_xDoc(&rD) , m_IsInUpdateFontList(false) , m_pStyleManager(new svx::CommonStyleManager(*this)) , m_pView(nullptr) , m_pWrtShell(nullptr) , m_nUpdateDocMode(document::UpdateDocMode::ACCORDING_TO_CONFIG) , m_IsATemplate(false) , m_IsRemovedInvisibleContent(false) { Init_Impl(); } // Dtor SwDocShell::~SwDocShell() { // disable chart related objects now because in ~SwDoc it may be too late for this if (m_xDoc) { m_xDoc->getIDocumentChartDataProviderAccess().GetChartControllerHelper().Disconnect(); SwChartDataProvider *pPCD = m_xDoc->getIDocumentChartDataProviderAccess().GetChartDataProvider(); if (pPCD) pPCD->dispose(); } RemoveLink(); m_pFontList.reset(); // we, as BroadCaster also become our own Listener // (for DocInfo/FileNames/...) EndListening( *this ); m_pOLEChildList.reset(); } void SwDocShell::Init_Impl() { SetPool(&SwModule::get()->GetPool()); SetBaseModel(new SwXTextDocument(this)); // we, as BroadCaster also become our own Listener // (for DocInfo/FileNames/...) StartListening( *this ); //position of the "Automatic" style filter for the stylist (app.src) SetAutoStyleFilterIndex(3); // set map unit to twip SetMapUnit( MapUnit::MapTwip ); } void SwDocShell::AddLink() { if (!m_xDoc) { SwDocFac aFactory; m_xDoc = &aFactory.GetDoc(); m_xDoc->getIDocumentSettingAccess().set(DocumentSettingId::HTML_MODE, dynamic_cast< const SwWebDocShell *>( this ) != nullptr ); } m_xDoc->SetDocShell( this ); // set the DocShell-Pointer for Doc rtl::Reference< SwXTextDocument > xDoc(GetBaseModel()); xDoc->Reactivate(this); SetPool(&m_xDoc->GetAttrPool()); // most suitably not until a sdbcx::View is created!!! m_xDoc->SetOle2Link(LINK(this, SwDocShell, Ole2ModifiedHdl)); } // create new FontList Change Printer void SwDocShell::UpdateFontList() { if (!m_IsInUpdateFontList) { m_IsInUpdateFontList = true; OSL_ENSURE(m_xDoc, "No Doc no FontList"); if (m_xDoc) { m_pFontList.reset( new FontList( m_xDoc->getIDocumentDeviceAccess().getReferenceDevice(true) ) ); PutItem( SvxFontListItem( m_pFontList.get(), SID_ATTR_CHAR_FONTLIST ) ); } m_IsInUpdateFontList = false; } } void SwDocShell::RemoveLink() { // disconnect Uno-Object rtl::Reference< SwXTextDocument > xDoc(GetBaseModel()); xDoc->Invalidate(); if (m_xDoc) { if (m_xBasePool.is()) { m_xBasePool->dispose(); m_xBasePool.clear(); } m_xDoc->SetOle2Link(Link<bool,void>()); m_xDoc->SetDocShell( nullptr ); m_xDoc.clear(); // we don't have the Doc anymore!! } } void SwDocShell::InvalidateModel() { // disconnect Uno-Object rtl::Reference< SwXTextDocument > xDoc(GetBaseModel()); xDoc->Invalidate(); } void SwDocShell::ReactivateModel() { // disconnect Uno-Object rtl::Reference< SwXTextDocument > xDoc(GetBaseModel()); xDoc->Reactivate(this); } // Load, Default-Format bool SwDocShell::Load( SfxMedium& rMedium ) { bool bRet = false; if (SfxObjectShell::Load(rMedium)) { comphelper::EmbeddedObjectContainer& rEmbeddedObjectContainer = getEmbeddedObjectContainer(); rEmbeddedObjectContainer.setUserAllowsLinkUpdate(false); SAL_INFO( "sw.ui", "after SfxInPlaceObject::Load" ); if (m_xDoc) // for last version!! RemoveLink(); // release the existing AddLink(); // set Link and update Data!! // Define some settings for legacy ODF files that have different default values now // (if required, they will be overridden later when settings will be read) if (IsOwnStorageFormat(rMedium)) { SwDrawModel* pDrawModel = m_xDoc->getIDocumentDrawModelAccess().GetDrawModel(); if (pDrawModel) { pDrawModel->SetCompatibilityFlag(SdrCompatibilityFlag::AnchoredTextOverflowLegacy, true); // legacy processing for tdf#99729 pDrawModel->SetCompatibilityFlag(SdrCompatibilityFlag::LegacyFontwork, true); // legacy processing for tdf#148000 } } // Loading // for MD OSL_ENSURE( !m_xBasePool.is(), "who hasn't destroyed their Pool?" ); m_xBasePool = new SwDocStyleSheetPool( *m_xDoc, SfxObjectCreateMode::ORGANIZER == GetCreateMode() ); if(GetCreateMode() != SfxObjectCreateMode::ORGANIZER) { const SfxUInt16Item* pUpdateDocItem = rMedium.GetItemSet().GetItem(SID_UPDATEDOCMODE, false); m_nUpdateDocMode = pUpdateDocItem ? pUpdateDocItem->GetValue() : document::UpdateDocMode::NO_UPDATE; } SwModule* mod = SwModule::get(); SwWait aWait( *this, true ); ErrCodeMsg nErr = ERR_SWG_READ_ERROR; switch( GetCreateMode() ) { case SfxObjectCreateMode::ORGANIZER: { if( ReadXML ) { ReadXML->SetOrganizerMode( true ); SwReader aRdr(rMedium, OUString(), m_xDoc.get()); nErr = aRdr.Read( *ReadXML ); ReadXML->SetOrganizerMode( false ); } } break; case SfxObjectCreateMode::INTERNAL: case SfxObjectCreateMode::EMBEDDED: { SwTransferable::InitOle( this ); } // suppress SfxProgress, when we are Embedded mod->SetEmbeddedLoadSave( true ); [[fallthrough]]; case SfxObjectCreateMode::STANDARD: { Reader *pReader = ReadXML; if( pReader ) { // set Doc's DocInfo at DocShell-Medium SAL_INFO( "sw.ui", "before ReadDocInfo" ); SwReader aRdr(rMedium, OUString(), m_xDoc.get()); SAL_INFO( "sw.ui", "before Read" ); nErr = aRdr.Read( *pReader ); SAL_INFO( "sw.ui", "after Read" ); // If a XML document is loaded, the global doc/web doc // flags have to be set, because they aren't loaded // by this formats. if( dynamic_cast< const SwWebDocShell *>( this ) != nullptr ) { if (!m_xDoc->getIDocumentSettingAccess().get(DocumentSettingId::HTML_MODE)) m_xDoc->getIDocumentSettingAccess().set(DocumentSettingId::HTML_MODE, true); } if( dynamic_cast< const SwGlobalDocShell *>( this ) != nullptr ) { if (!m_xDoc->getIDocumentSettingAccess().get(DocumentSettingId::GLOBAL_DOCUMENT)) m_xDoc->getIDocumentSettingAccess().set(DocumentSettingId::GLOBAL_DOCUMENT, true); } } } break; default: OSL_ENSURE( false, "Load: new CreateMode?" ); } UpdateFontList(); InitDrawModelAndDocShell(this, m_xDoc ? m_xDoc->getIDocumentDrawModelAccess().GetDrawModel() : nullptr); SetError(nErr); bRet = !nErr.IsError(); if (bRet && !m_xDoc->IsInLoadAsynchron() && GetCreateMode() == SfxObjectCreateMode::STANDARD) { LoadingFinished(); } // suppress SfxProgress, when we are Embedded mod->SetEmbeddedLoadSave( false ); } return bRet; } bool SwDocShell::LoadFrom( SfxMedium& rMedium ) { bool bRet = false; if (m_xDoc) RemoveLink(); AddLink(); // set Link and update Data!! do { // middle check loop ErrCodeMsg nErr = ERR_SWG_READ_ERROR; OUString aStreamName = u"styles.xml"_ustr; uno::Reference < container::XNameAccess > xAccess = rMedium.GetStorage(); if ( xAccess->hasByName( aStreamName ) && rMedium.GetStorage()->isStreamElement( aStreamName ) ) { // Loading SwWait aWait( *this, true ); { OSL_ENSURE( !m_xBasePool.is(), "who hasn't destroyed their Pool?" ); m_xBasePool = new SwDocStyleSheetPool( *m_xDoc, SfxObjectCreateMode::ORGANIZER == GetCreateMode() ); if( ReadXML ) { ReadXML->SetOrganizerMode( true ); SwReader aRdr(rMedium, OUString(), m_xDoc.get()); nErr = aRdr.Read( *ReadXML ); ReadXML->SetOrganizerMode( false ); } } } else { OSL_FAIL("Code removed!"); } SetError(nErr); bRet = !nErr.IsError(); } while( false ); SfxObjectShell::LoadFrom( rMedium ); m_xDoc->getIDocumentState().ResetModified(); return bRet; } void SwDocShell::SubInitNew() { OSL_ENSURE( !m_xBasePool.is(), "who hasn't destroyed their Pool?" ); m_xBasePool = new SwDocStyleSheetPool( *m_xDoc, SfxObjectCreateMode::ORGANIZER == GetCreateMode() ); UpdateFontList(); InitDrawModelAndDocShell(this, m_xDoc ? m_xDoc->getIDocumentDrawModelAccess().GetDrawModel() : nullptr); m_xDoc->getIDocumentSettingAccess().setLinkUpdateMode( GLOBALSETTING ); m_xDoc->getIDocumentSettingAccess().setFieldUpdateFlags( AUTOUPD_GLOBALSETTING ); bool bWeb = dynamic_cast< const SwWebDocShell *>( this ) != nullptr; static const WhichRangesContainer nRange1(svl::Items< RES_CHRATR_COLOR, RES_CHRATR_COLOR, RES_CHRATR_LANGUAGE, RES_CHRATR_LANGUAGE, RES_CHRATR_CJK_LANGUAGE, RES_CHRATR_CJK_LANGUAGE, RES_CHRATR_CTL_LANGUAGE, RES_CHRATR_CTL_LANGUAGE, RES_PARATR_ADJUST, RES_PARATR_ADJUST >); static const WhichRangesContainer nRange2(svl::Items< RES_CHRATR_COLOR, RES_CHRATR_COLOR, RES_CHRATR_LANGUAGE, RES_CHRATR_LANGUAGE, RES_CHRATR_CJK_LANGUAGE, RES_CHRATR_CJK_LANGUAGE, RES_CHRATR_CTL_LANGUAGE, RES_CHRATR_CTL_LANGUAGE, RES_PARATR_ADJUST, RES_PARATR_ADJUST, RES_PARATR_TABSTOP, RES_PARATR_HYPHENZONE >); SfxItemSet aDfltSet( m_xDoc->GetAttrPool(), bWeb ? nRange1 : nRange2 ); //! get lingu options without loading lingu DLL SvtLinguOptions aLinguOpt; const bool bFuzzing = comphelper::IsFuzzing(); if (!bFuzzing) SvtLinguConfig().GetOptions(aLinguOpt); LanguageType nVal = MsLangId::resolveSystemLanguageByScriptType(aLinguOpt.nDefaultLanguage, css::i18n::ScriptType::LATIN), eCJK = MsLangId::resolveSystemLanguageByScriptType(aLinguOpt.nDefaultLanguage_CJK, css::i18n::ScriptType::ASIAN), eCTL = MsLangId::resolveSystemLanguageByScriptType(aLinguOpt.nDefaultLanguage_CTL, css::i18n::ScriptType::COMPLEX); aDfltSet.Put( SvxLanguageItem( nVal, RES_CHRATR_LANGUAGE ) ); aDfltSet.Put( SvxLanguageItem( eCJK, RES_CHRATR_CJK_LANGUAGE ) ); aDfltSet.Put( SvxLanguageItem( eCTL, RES_CHRATR_CTL_LANGUAGE ) ); if(!bWeb) { SvxHyphenZoneItem aHyp( m_xDoc->GetDefault(RES_PARATR_HYPHENZONE) ); aHyp.GetMinLead() = static_cast< sal_uInt8 >(aLinguOpt.nHyphMinLeading); aHyp.GetMinTrail() = static_cast< sal_uInt8 >(aLinguOpt.nHyphMinTrailing); aHyp.GetMinWordLength() = static_cast< sal_uInt8 >(aLinguOpt.nHyphMinWordLength); aDfltSet.Put( aHyp ); sal_uInt16 nNewPos = o3tl::toTwips(SwModule::get()->GetUsrPref(false)->GetDefTabInMm100(), o3tl::Length::mm100); if( nNewPos ) aDfltSet.Put( SvxTabStopItem( 1, nNewPos, SvxTabAdjust::Default, RES_PARATR_TABSTOP ) ); } aDfltSet.Put( SvxColorItem( COL_AUTO, RES_CHRATR_COLOR ) ); m_xDoc->SetDefault( aDfltSet ); //default page mode for text grid if(!bWeb) { bool bSquaredPageMode = SwModule::get()->GetUsrPref(false)->IsSquaredPageMode(); m_xDoc->SetDefaultPageMode( bSquaredPageMode ); // only set Widow/Orphan defaults on a new, non-web document - not an opened one if (GetMedium() && GetMedium()->GetOrigURL().isEmpty() && !bFuzzing) { m_xDoc->SetDefault( SvxWidowsItem( sal_uInt8(2), RES_PARATR_WIDOWS) ); m_xDoc->SetDefault( SvxOrphansItem( sal_uInt8(2), RES_PARATR_ORPHANS) ); } } m_xDoc->getIDocumentState().ResetModified(); } /* * Document Interface Access */ IDocumentDeviceAccess& SwDocShell::getIDocumentDeviceAccess() { return m_xDoc->getIDocumentDeviceAccess(); } IDocumentChartDataProviderAccess& SwDocShell::getIDocumentChartDataProviderAccess() { return m_xDoc->getIDocumentChartDataProviderAccess(); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */

↑ V557 Array overrun is possible. The 'GetFontFor' function processes value in range [1..10243]. Inspect the first argument. Check lines: 'docshini.cxx:258', 'fontcfg.hxx:88'.