/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <config_features.h>
#include <DrawViewShell.hxx>
#include <DrawController.hxx>
#include <sfx2/viewfrm.hxx>
#include <editeng/eeitem.hxx>
#include <editeng/tstpitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/protitem.hxx>
#include <editeng/frmdiritem.hxx>
#include <editeng/adjustitem.hxx>
#include <svx/svdotable.hxx>
#include <editeng/numitem.hxx>
#include <svx/rulritem.hxx>
#include <svx/svxids.hrc>
#include <svx/svdpagv.hxx>
#include <sfx2/request.hxx>
#include <sfx2/dispatch.hxx>
#include <tools/urlobj.hxx>
#include <svl/eitem.hxx>
#include <svl/rectitem.hxx>
#include <svl/stritem.hxx>
#include <svx/svdoole2.hxx>
#include <svl/itempool.hxx>
#include <svl/ptitem.hxx>
#include <basic/sbstar.hxx>
#include <basic/sberrors.hxx>
#include <svx/fmshell.hxx>
#include <svx/f3dchild.hxx>
#include <svx/float3d.hxx>
#include <svx/sdmetitm.hxx>
#include <svx/svdogrp.hxx>
#include <svx/diagram/IDiagramHelper.hxx>
#include <app.hrc>
#include <strings.hrc>
#include <sdundogr.hxx>
#include <undopage.hxx>
#include <fupoor.hxx>
#include <slideshow.hxx>
#include <sdpage.hxx>
#include <Window.hxx>
#include <sdresid.hxx>
#include <unokywds.hxx>
#include <drawview.hxx>
#include <drawdoc.hxx>
#include <DrawDocShell.hxx>
#include <sdabstdlg.hxx>
#include <sfx2/ipclient.hxx>
#include <comphelper/diagnose_ex.hxx>
#include <ViewShellBase.hxx>
#include <FormShellManager.hxx>
#include <LayerTabBar.hxx>
#include <com/sun/star/drawing/framework/XControllerManager.hpp>
#include <com/sun/star/drawing/framework/XConfigurationController.hpp>
#include <com/sun/star/drawing/framework/XConfiguration.hpp>
#include <com/sun/star/drawing/XShape.hpp>
#include <com/sun/star/frame/XFrame.hpp>
#include <editeng/lspcitem.hxx>
#include <editeng/ulspitem.hxx>
#include <memory>
#include <comphelper/processfactory.hxx>
#include <oox/drawingml/diagram/diagram.hxx>
#include <oox/export/drawingml.hxx>
#include <oox/shape/ShapeFilterBase.hxx>
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::drawing::framework;
using ::com::sun::star::frame::XFrame;
using ::com::sun::star::frame::XController;
namespace sd {
/**
* handle SfxRequests for controller
*/
void DrawViewShell::ExecCtrl(SfxRequest& rReq)
{
// except a page switch and jumps to bookmarks, nothing is executed during
// a slide show
if( HasCurrentFunction(SID_PRESENTATION) &&
rReq.GetSlot() != SID_SWITCHPAGE &&
rReq.GetSlot() != SID_JUMPTOMARK)
return;
CheckLineTo (rReq);
// End text edit mode for some requests.
sal_uInt16 nSlot = rReq.GetSlot();
bool bAllowFocusChange = true;
switch (nSlot)
{
case SID_OUTPUT_QUALITY_COLOR:
case SID_OUTPUT_QUALITY_GRAYSCALE:
case SID_OUTPUT_QUALITY_BLACKWHITE:
case SID_OUTPUT_QUALITY_CONTRAST:
// Do nothing.
break;
case SID_SWITCHPAGE:
if (rReq.GetArgs() && rReq.GetArgs()->Count () == 1)
{
const SfxBoolItem* pAllowFocusChange = rReq.GetArg<SfxBoolItem>(SID_SWITCHPAGE);
bAllowFocusChange = pAllowFocusChange->GetValue();
if (!bAllowFocusChange)
break;
}
[[fallthrough]];
default:
if ( mpDrawView->IsTextEdit() )
{
mpDrawView->SdrEndTextEdit();
}
}
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
// sal_uInt16 nSlot = rReq.GetSlot();
switch (nSlot)
{
case SID_SWITCHPAGE: // BASIC
{
// switch page in running slide show
if(SlideShow::IsRunning(GetViewShellBase())
&& !SlideShow::IsInteractiveSlideshow(&GetViewShellBase()) // IASS
&& rReq.GetArgs())
{
if (const SfxUInt32Item* pWhatPage = rReq.GetArg<SfxUInt32Item>(ID_VAL_WHATPAGE))
SlideShow::GetSlideShow(GetViewShellBase())->jumpToPageNumber(static_cast<sal_Int32>((pWhatPage->GetValue()-1)>>1));
}
else
{
const SfxItemSet *pArgs = rReq.GetArgs ();
sal_uInt16 nSelectedPage = 0;
if (! pArgs || pArgs->Count () == 1)
{
nSelectedPage = maTabControl->GetCurPagePos();
}
else if (pArgs->Count () == 2)
{
const SfxUInt32Item* pWhatPage = rReq.GetArg<SfxUInt32Item>(ID_VAL_WHATPAGE);
const SfxUInt32Item* pWhatKind = rReq.GetArg<SfxUInt32Item>(ID_VAL_WHATKIND);
sal_Int32 nWhatPage = static_cast<sal_Int32>(pWhatPage->GetValue ());
PageKind nWhatKind = static_cast<PageKind>(pWhatKind->GetValue ());
if (nWhatKind < PageKind::Standard || nWhatKind > PageKind::Handout)
{
#if HAVE_FEATURE_SCRIPTING
StarBASIC::FatalError (ERRCODE_BASIC_BAD_PROP_VALUE);
#endif
rReq.Ignore ();
break;
}
else if (meEditMode != EditMode::MasterPage)
{
if (! CHECK_RANGE (0, nWhatPage, GetDoc()->GetSdPageCount(nWhatKind)))
{
#if HAVE_FEATURE_SCRIPTING
StarBASIC::FatalError (ERRCODE_BASIC_BAD_PROP_VALUE);
#endif
rReq.Ignore ();
break;
}
nSelectedPage = static_cast<short>(nWhatPage);
mePageKind = nWhatKind;
}
}
else
{
#if HAVE_FEATURE_SCRIPTING
StarBASIC::FatalError (ERRCODE_BASIC_WRONG_ARGS);
#endif
rReq.Ignore ();
break;
}
if( GetDocSh() && (GetDocSh()->GetCreateMode() == SfxObjectCreateMode::EMBEDDED))
GetDocSh()->SetModified();
SwitchPage(nSelectedPage, bAllowFocusChange);
if(HasCurrentFunction(SID_BEZIER_EDIT))
GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
Invalidate();
InvalidateWindows();
rReq.Done ();
}
break;
}
case SID_SWITCHLAYER: // BASIC
{
const SfxItemSet *pArgs = rReq.GetArgs ();
// #i87182#
bool bCurPageValid(false);
sal_uInt16 nCurPage(0);
if(GetLayerTabControl())
{
nCurPage = GetLayerTabControl()->GetCurPageId();
bCurPageValid = true;
}
if(pArgs && 1 == pArgs->Count())
{
const SfxUInt32Item* pWhatLayer = rReq.GetArg<SfxUInt32Item>(ID_VAL_WHATLAYER);
if(pWhatLayer)
{
nCurPage = static_cast<short>(pWhatLayer->GetValue());
bCurPageValid = true;
}
}
if(bCurPageValid)
{
OUString aLayerName( GetLayerTabControl()->GetLayerName(nCurPage));
if (!aLayerName.isEmpty())
{
mpDrawView->SetActiveLayer(aLayerName);
}
Invalidate();
}
rReq.Done ();
break;
}
case SID_PAGEMODE: // BASIC
{
const SfxItemSet *pArgs = rReq.GetArgs();
if (pArgs && pArgs->Count () == 2)
{
const SfxBoolItem* pIsActive = rReq.GetArg<SfxBoolItem>(ID_VAL_ISACTIVE);
const SfxUInt32Item* pWhatKind = rReq.GetArg<SfxUInt32Item>(ID_VAL_WHATKIND);
PageKind nWhatKind = static_cast<PageKind>(pWhatKind->GetValue());
if ( nWhatKind >= PageKind::Standard && nWhatKind <= PageKind::Handout)
{
mbIsLayerModeActive = pIsActive->GetValue();
mePageKind = nWhatKind;
}
}
// turn on default layer of page
mpDrawView->SetActiveLayer(sUNO_LayerName_layout);
ChangeEditMode(EditMode::Page, mbIsLayerModeActive);
Invalidate();
rReq.Done ();
break;
}
case SID_LAYERMODE: // BASIC
{
const SfxItemSet *pArgs = rReq.GetArgs();
if (pArgs && pArgs->Count() == 2)
{
const SfxUInt32Item* pWhatLayer = rReq.GetArg<SfxUInt32Item>(ID_VAL_WHATLAYER);
EditMode nWhatLayer = static_cast<EditMode>(pWhatLayer->GetValue());
if (nWhatLayer == EditMode::Page || nWhatLayer == EditMode::MasterPage)
{
mbIsLayerModeActive = rReq.GetArg<SfxBoolItem>(ID_VAL_ISACTIVE)->GetValue();
meEditMode = nWhatLayer;
}
}
ChangeEditMode(meEditMode, !mbIsLayerModeActive);
Invalidate();
rReq.Done();
break;
}
case SID_HEADER_AND_FOOTER:
case SID_INSERT_PAGE_NUMBER:
case SID_INSERT_DATE_TIME:
{
SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create();
vcl::Window* pWin = GetActiveWindow();
VclPtr<AbstractHeaderFooterDialog> pDlg(pFact->CreateHeaderFooterDialog(this, pWin ? pWin->GetFrameWeld() : nullptr, GetDoc(), mpActualPage));
auto xRequest = std::make_shared<SfxRequest>(rReq);
rReq.Ignore(); // the 'old' request is not relevant any more
pDlg->StartExecuteAsync([this, pDlg, xRequest=std::move(xRequest)](sal_Int32 /*nResult*/){
GetActiveWindow()->Invalidate();
UpdatePreview( mpActualPage );
Invalidate();
xRequest->Done();
pDlg->disposeOnce();
});
break;
}
case SID_MASTER_LAYOUTS:
{
SdPage* pPage = GetActualPage();
if (meEditMode == EditMode::MasterPage)
// Use the master page of the current page.
pPage = static_cast<SdPage*>(&pPage->TRG_GetMasterPage());
SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create();
vcl::Window* pWin = GetActiveWindow();
ScopedVclPtr<VclAbstractDialog> pDlg(pFact->CreateMasterLayoutDialog(pWin ? pWin->GetFrameWeld() : nullptr, GetDoc(), pPage));
pDlg->Execute();
Invalidate();
rReq.Done ();
break;
}
case SID_OBJECTRESIZE:
{
// The server likes to change the client size
OSL_ASSERT (GetViewShell()!=nullptr);
SfxInPlaceClient* pIPClient = GetViewShell()->GetIPClient();
if ( pIPClient && pIPClient->IsObjectInPlaceActive() )
{
const SfxRectangleItem& rRect =
rReq.GetArgs()->Get(SID_OBJECTRESIZE);
::tools::Rectangle aRect( GetActiveWindow()->PixelToLogic( rRect.GetValue() ) );
if ( rMarkList.GetMarkCount() != 0 )
{
if (rMarkList.GetMarkCount() == 1)
{
SdrMark* pMark = rMarkList.GetMark(0);
SdrObject* pObj = pMark->GetMarkedSdrObj();
SdrOle2Obj* pOle2Obj = dynamic_cast< SdrOle2Obj* >( pObj );
if(pOle2Obj)
{
if( pOle2Obj->GetObjRef().is() )
{
pOle2Obj->SetLogicRect(aRect);
}
}
}
}
}
rReq.Ignore ();
break;
}
case SID_RELOAD:
{
sal_uInt16 nId = Svx3DChildWindow::GetChildWindowId();
SfxViewFrame* pFrame = GetViewFrame();
try
{
Reference< XFrame > xFrame( pFrame->GetFrame().GetFrameInterface(), UNO_SET_THROW );
// Save the current configuration of panes and views.
DrawController* pDrawController = GetViewShellBase().GetDrawController();
if (pDrawController)
{
Reference<XConfigurationController> xConfigurationController (
pDrawController->getConfigurationController(), UNO_SET_THROW );
Reference<XConfiguration> xConfiguration (
xConfigurationController->getRequestedConfiguration(), UNO_SET_THROW );
SfxChildWindow* pWindow = pFrame->GetChildWindow(nId);
if(pWindow)
{
Svx3DWin* p3DWin = static_cast<Svx3DWin*>(pWindow->GetWindow());
if(p3DWin)
p3DWin->DocumentReload();
}
// normal forwarding to ViewFrame for execution
GetViewFrame()->ExecuteSlot(rReq);
// From here on we must cope with this object and the frame already being
// deleted. Do not call any methods or use data members.
Reference<XController> xController( xFrame->getController(), UNO_SET_THROW );
// Restore the configuration.
Reference<XControllerManager> xControllerManager( xController, UNO_QUERY_THROW );
xConfigurationController.set( xControllerManager->getConfigurationController() );
if ( ! xConfigurationController.is())
throw RuntimeException();
xConfigurationController->restoreConfiguration(xConfiguration);
}
}
catch (RuntimeException&)
{
DBG_UNHANDLED_EXCEPTION("sd.view");
}
// We have to return immediately to avoid accessing this object.
return;
}
case SID_JUMPTOMARK:
{
if( rReq.GetArgs() )
{
const SfxStringItem* pBookmark = rReq.GetArg<SfxStringItem>(SID_JUMPTOMARK);
if (pBookmark)
{
OUString sBookmark(INetURLObject::decode(pBookmark->GetValue(), INetURLObject::DecodeMechanism::WithCharset));
rtl::Reference< sd::SlideShow > xSlideshow( SlideShow::GetSlideShow( GetViewShellBase() ) );
if(xSlideshow.is() && xSlideshow->isRunning())
{
xSlideshow->jumpToBookmark(sBookmark);
}
else
{
GotoBookmark(sBookmark);
}
}
}
rReq.Done();
break;
}
case SID_OUTPUT_QUALITY_COLOR:
case SID_OUTPUT_QUALITY_GRAYSCALE:
case SID_OUTPUT_QUALITY_BLACKWHITE:
case SID_OUTPUT_QUALITY_CONTRAST:
{
ExecReq( rReq );
break;
}
case SID_MAIL_SCROLLBODY_PAGEDOWN:
{
ExecReq( rReq );
break;
}
case SID_ATTR_YEAR2000:
{
FmFormShell* pFormShell = GetViewShellBase().GetFormShellManager()->GetFormShell();
if (pFormShell != nullptr)
{
const SfxPoolItem* pItem;
if (rReq.GetArgs()->GetItemState(
SID_ATTR_YEAR2000, true, &pItem) == SfxItemState::SET)
pFormShell->SetY2KState (
static_cast<const SfxUInt16Item*>(pItem)->GetValue());
}
rReq.Done();
}
break;
case SID_OPT_LOCALE_CHANGED:
{
GetActiveWindow()->Invalidate();
UpdatePreview( mpActualPage );
rReq.Done();
}
break;
case SID_REGENERATE_DIAGRAM:
case SID_EDIT_DIAGRAM:
{
if (1 == rMarkList.GetMarkCount())
{
SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
// Support advanced DiagramHelper
if(nullptr != pObj && pObj->isDiagram())
{
if(SID_REGENERATE_DIAGRAM == nSlot)
{
mpDrawView->UnmarkAll();
pObj->getDiagramHelper()->reLayout(*static_cast<SdrObjGroup*>(pObj));
mpDrawView->MarkObj(pObj, mpDrawView->GetSdrPageView());
}
else // SID_EDIT_DIAGRAM
{
VclAbstractDialogFactory* pFact = VclAbstractDialogFactory::Create();
VclPtr<VclAbstractDialog> pDlg = pFact->CreateDiagramDialog(
GetFrameWeld(),
*static_cast<SdrObjGroup*>(pObj));
pDlg->StartExecuteAsync(
[pDlg] (sal_Int32 /*nResult*/)->void
{
pDlg->disposeOnce();
}
);
}
}
}
rReq.Done();
}
break;
default:
break;
}
}
void DrawViewShell::ExecRuler(SfxRequest& rReq)
{
// nothing is executed during a slide show!
if(HasCurrentFunction(SID_PRESENTATION))
return;
CheckLineTo (rReq);
const SfxItemSet* pArgs = rReq.GetArgs();
const Point aPagePos( GetActiveWindow()->GetViewOrigin() );
Size aPageSize = mpActualPage->GetSize();
Size aViewSize = GetActiveWindow()->GetViewSize();
switch ( rReq.GetSlot() )
{
case SID_ATTR_LONG_LRSPACE:
if (pArgs)
{
std::unique_ptr<SdUndoGroup> pUndoGroup(new SdUndoGroup(GetDoc()));
pUndoGroup->SetComment(SdResId(STR_UNDO_CHANGE_PAGEBORDER));
const SvxLongLRSpaceItem& rLRSpace =
pArgs->Get(SID_ATTR_LONG_LRSPACE);
if( mpDrawView->IsTextEdit() )
{
::tools::Rectangle aRect = maMarkRect;
aRect.SetPos(aRect.TopLeft() + aPagePos);
aRect.SetLeft( rLRSpace.GetLeft() );
aRect.SetRight( aViewSize.Width() - rLRSpace.GetRight() );
aRect.SetPos(aRect.TopLeft() - aPagePos);
if ( aRect != maMarkRect)
{
mpDrawView->SetAllMarkedRect(aRect);
maMarkRect = mpDrawView->GetAllMarkedRect();
Invalidate( SID_RULER_OBJECT );
}
}
else
{
::tools::Long nLeft = std::max(::tools::Long(0), rLRSpace.GetLeft() - aPagePos.X());
::tools::Long nRight = std::max(::tools::Long(0), rLRSpace.GetRight() + aPagePos.X() +
aPageSize.Width() - aViewSize.Width());
sal_uInt16 nPageCnt = GetDoc()->GetSdPageCount(mePageKind);
sal_uInt16 i;
for ( i = 0; i < nPageCnt; i++)
{
SdPage* pPage = GetDoc()->GetSdPage(i, mePageKind);
SdUndoAction* pUndo = new SdPageLRUndoAction(GetDoc(),
pPage,
pPage->GetLeftBorder(),
pPage->GetRightBorder(),
nLeft, nRight);
pUndoGroup->AddAction(pUndo);
pPage->SetLeftBorder(nLeft);
pPage->SetRightBorder(nRight);
}
nPageCnt = GetDoc()->GetMasterSdPageCount(mePageKind);
for (i = 0; i < nPageCnt; i++)
{
SdPage* pPage = GetDoc()->GetMasterSdPage(i, mePageKind);
SdUndoAction* pUndo = new SdPageLRUndoAction(GetDoc(),
pPage,
pPage->GetLeftBorder(),
pPage->GetRightBorder(),
nLeft, nRight);
pUndoGroup->AddAction(pUndo);
pPage->SetLeftBorder(nLeft);
pPage->SetRightBorder(nRight);
}
InvalidateWindows();
}
// give the undo group to the undo manager
GetViewFrame()->GetObjectShell()->GetUndoManager()->
AddUndoAction(std::move(pUndoGroup));
}
break;
case SID_ATTR_LONG_ULSPACE:
if (pArgs)
{
std::unique_ptr<SdUndoGroup> pUndoGroup(new SdUndoGroup(GetDoc()));
pUndoGroup->SetComment(SdResId(STR_UNDO_CHANGE_PAGEBORDER));
const SvxLongULSpaceItem& rULSpace =
pArgs->Get(SID_ATTR_LONG_ULSPACE);
if( mpDrawView->IsTextEdit() )
{
::tools::Rectangle aRect = maMarkRect;
aRect.SetPos(aRect.TopLeft() + aPagePos);
aRect.SetTop( rULSpace.GetUpper() );
aRect.SetBottom( aViewSize.Height() - rULSpace.GetLower() );
aRect.SetPos(aRect.TopLeft() - aPagePos);
if ( aRect != maMarkRect)
{
mpDrawView->SetAllMarkedRect(aRect);
maMarkRect = mpDrawView->GetAllMarkedRect();
Invalidate( SID_RULER_OBJECT );
}
}
else
{
::tools::Long nUpper = std::max(::tools::Long(0), rULSpace.GetUpper() - aPagePos.Y());
::tools::Long nLower = std::max(::tools::Long(0), rULSpace.GetLower() + aPagePos.Y() +
aPageSize.Height() - aViewSize.Height());
sal_uInt16 nPageCnt = GetDoc()->GetSdPageCount(mePageKind);
sal_uInt16 i;
for ( i = 0; i < nPageCnt; i++)
{
SdPage* pPage = GetDoc()->GetSdPage(i, mePageKind);
SdUndoAction* pUndo = new SdPageULUndoAction(GetDoc(),
pPage,
pPage->GetUpperBorder(),
pPage->GetLowerBorder(),
nUpper, nLower);
pUndoGroup->AddAction(pUndo);
pPage->SetUpperBorder(nUpper);
pPage->SetLowerBorder(nLower);
}
nPageCnt = GetDoc()->GetMasterSdPageCount(mePageKind);
for (i = 0; i < nPageCnt; i++)
{
SdPage* pPage = GetDoc()->GetMasterSdPage(i, mePageKind);
SdUndoAction* pUndo = new SdPageULUndoAction(GetDoc(),
pPage,
pPage->GetUpperBorder(),
pPage->GetLowerBorder(),
nUpper, nLower);
pUndoGroup->AddAction(pUndo);
pPage->SetUpperBorder(nUpper);
pPage->SetLowerBorder(nLower);
}
InvalidateWindows();
}
// give the undo group to the undo manager
GetViewFrame()->GetObjectShell()->GetUndoManager()->
AddUndoAction(std::move(pUndoGroup));
}
break;
case SID_RULER_OBJECT:
if (pArgs)
{
::tools::Rectangle aRect = maMarkRect;
aRect.SetPos(aRect.TopLeft() + aPagePos);
const SvxObjectItem& rOI = pArgs->Get(SID_RULER_OBJECT);
if ( rOI.GetStartX() != rOI.GetEndX() )
{
aRect.SetLeft( rOI.GetStartX() );
aRect.SetRight( rOI.GetEndX() );
}
if ( rOI.GetStartY() != rOI.GetEndY() )
{
aRect.SetTop( rOI.GetStartY() );
aRect.SetBottom( rOI.GetEndY() );
}
aRect.SetPos(aRect.TopLeft() - aPagePos);
if ( aRect != maMarkRect)
{
mpDrawView->SetAllMarkedRect(aRect);
maMarkRect = mpDrawView->GetAllMarkedRect();
Invalidate( SID_RULER_OBJECT );
}
}
break;
case SID_ATTR_TABSTOP:
if (pArgs && mpDrawView->IsTextEdit())
{
const SvxTabStopItem& rItem = pArgs->Get( EE_PARA_TABS );
SfxItemSetFixed<EE_PARA_TABS, EE_PARA_TABS> aEditAttr( GetPool() );
aEditAttr.Put( rItem );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_TABSTOP);
}
break;
case SID_ATTR_PARA_LINESPACE:
if (pArgs)
{
SvxLineSpacingItem aParaLineSP = pArgs->Get(
GetPool().GetWhichIDFromSlotID(SID_ATTR_PARA_LINESPACE));
SfxItemSetFixed<EE_PARA_SBL, EE_PARA_SBL> aEditAttr( GetPool() );
aParaLineSP.SetWhich( EE_PARA_SBL );
aEditAttr.Put( aParaLineSP );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_LINESPACE);
}
break;
case SID_ATTR_PARA_ADJUST_LEFT:
{
SvxAdjustItem aItem( SvxAdjust::Left, EE_PARA_JUST );
SfxItemSetFixed<EE_PARA_JUST, EE_PARA_JUST> aEditAttr( GetPool() );
aEditAttr.Put( aItem );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_ADJUST_LEFT);
break;
}
case SID_ATTR_PARA_ADJUST_CENTER:
{
SvxAdjustItem aItem( SvxAdjust::Center, EE_PARA_JUST );
SfxItemSetFixed<EE_PARA_JUST, EE_PARA_JUST> aEditAttr( GetPool() );
aEditAttr.Put( aItem );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_ADJUST_CENTER);
break;
}
case SID_ATTR_PARA_ADJUST_RIGHT:
{
SvxAdjustItem aItem( SvxAdjust::Right, EE_PARA_JUST );
SfxItemSetFixed<EE_PARA_JUST, EE_PARA_JUST> aEditAttr( GetPool() );
aEditAttr.Put( aItem );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_ADJUST_RIGHT);
break;
}
case SID_ATTR_PARA_ADJUST_BLOCK:
{
SvxAdjustItem aItem( SvxAdjust::Block, EE_PARA_JUST );
SfxItemSetFixed<EE_PARA_JUST, EE_PARA_JUST> aEditAttr( GetPool() );
aEditAttr.Put( aItem );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_ADJUST_BLOCK);
break;
}
case SID_ATTR_PARA_ULSPACE:
if (pArgs)
{
SvxULSpaceItem aULSP = static_cast<const SvxULSpaceItem&>(pArgs->Get(
SID_ATTR_PARA_ULSPACE));
SfxItemSetFixed<EE_PARA_ULSPACE, EE_PARA_ULSPACE> aEditAttr( GetPool() );
aULSP.SetWhich( EE_PARA_ULSPACE );
aEditAttr.Put( aULSP );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_ULSPACE);
}
break;
case SID_ATTR_PARA_LRSPACE:
if (pArgs)
{
SvxLRSpaceItem aLRSpace = static_cast<const SvxLRSpaceItem&>(pArgs->Get(
SID_ATTR_PARA_LRSPACE));
SfxItemSetFixed<EE_PARA_LRSPACE, EE_PARA_LRSPACE> aEditAttr( GetPool() );
aLRSpace.SetWhich( EE_PARA_LRSPACE );
aEditAttr.Put( aLRSpace );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_LRSPACE);
}
break;
case SID_ATTR_LRSPACE:
if (pArgs && mpDrawView->IsTextEdit())
{
sal_uInt16 nId = SID_ATTR_PARA_LRSPACE;
const SvxLRSpaceItem& rItem = static_cast<const SvxLRSpaceItem&>(
pArgs->Get( nId ));
SfxItemSetFixed<
EE_PARA_NUMBULLET, EE_PARA_NUMBULLET,
EE_PARA_OUTLLEVEL, EE_PARA_OUTLLEVEL,
EE_PARA_LRSPACE, EE_PARA_LRSPACE> aEditAttr( GetDoc()->GetPool() );
mpDrawView->GetAttributes( aEditAttr );
nId = EE_PARA_LRSPACE;
SvxLRSpaceItem aLRSpaceItem( rItem.GetLeft(),
rItem.GetRight(),
rItem.GetTextFirstLineOffset(), nId );
const sal_Int16 nOutlineLevel = aEditAttr.Get( EE_PARA_OUTLLEVEL ).GetValue();
const SvxLRSpaceItem& rOrigLRSpaceItem = aEditAttr.Get( EE_PARA_LRSPACE );
const SvxNumBulletItem& rNumBulletItem = aEditAttr.Get( EE_PARA_NUMBULLET );
if( nOutlineLevel != -1 &&
rNumBulletItem.GetNumRule().GetLevelCount() > nOutlineLevel )
{
const SvxNumberFormat& rFormat = rNumBulletItem.GetNumRule().GetLevel(nOutlineLevel);
SvxNumberFormat aFormat(rFormat);
// left margin gets distributed onto LRSpace item
// and number format AbsLSpace - this fixes
// n#707779 (previously, LRSpace left indent could
// become negative - EditEngine really does not
// like that.
const auto nAbsLSpace=aFormat.GetAbsLSpace();
const ::tools::Long nTxtLeft=rItem.GetTextLeft();
const ::tools::Long nLeftIndent=std::max(::tools::Long(0),nTxtLeft - nAbsLSpace);
aLRSpaceItem.SetTextLeft(nLeftIndent);
// control for clipped left indent - remainder
// reduces number format first line indent
aFormat.SetAbsLSpace(nTxtLeft - nLeftIndent);
// negative first line indent goes to the number
// format, positive to the lrSpace item
if( rItem.GetTextFirstLineOffset() < 0 )
{
aFormat.SetFirstLineOffset(
rItem.GetTextFirstLineOffset()
- rOrigLRSpaceItem.GetTextFirstLineOffset()
+ aFormat.GetCharTextDistance());
aLRSpaceItem.SetTextFirstLineOffset(0);
}
else
{
aFormat.SetFirstLineOffset(0);
aLRSpaceItem.SetTextFirstLineOffset(
rItem.GetTextFirstLineOffset()
- aFormat.GetFirstLineOffset() //TODO: overflow
+ aFormat.GetCharTextDistance());
}
if( rFormat != aFormat )
{
// put all items
const_cast<SvxNumRule&>(rNumBulletItem.GetNumRule()).SetLevel(nOutlineLevel,aFormat);
aEditAttr.Put( rNumBulletItem );
aEditAttr.Put( aLRSpaceItem );
mpDrawView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_LRSPACE);
break;
}
}
// only put lrSpace item
SfxItemSetFixed<EE_PARA_LRSPACE, EE_PARA_LRSPACE> aEditAttrReduced( GetDoc()->GetPool() );
aEditAttrReduced.Put( aLRSpaceItem );
mpDrawView->SetAttributes( aEditAttrReduced );
Invalidate(SID_ATTR_PARA_LRSPACE);
}
break;
}
}
void DrawViewShell::GetRulerState(SfxItemSet& rSet)
{
Point aOrigin;
if (mpDrawView->GetSdrPageView())
{
aOrigin = mpDrawView->GetSdrPageView()->GetPageOrigin();
}
Size aViewSize = GetActiveWindow()->GetViewSize();
const Point aPagePos( GetActiveWindow()->GetViewOrigin() );
Size aPageSize = mpActualPage->GetSize();
::tools::Rectangle aRect(aPagePos, Point( aViewSize.Width() - (aPagePos.X() + aPageSize.Width()),
aViewSize.Height() - (aPagePos.Y() + aPageSize.Height())));
if( mpDrawView->IsTextEdit() )
{
Point aPnt1 = GetActiveWindow()->GetWinViewPos();
::tools::Rectangle aMinMaxRect( aPnt1, Size(-1, -1) );
rSet.Put( SfxRectangleItem(SID_RULER_LR_MIN_MAX, aMinMaxRect) );
}
else
{
rSet.Put( SfxRectangleItem(SID_RULER_LR_MIN_MAX, aRect) );
}
SvxLongLRSpaceItem aLRSpace(aPagePos.X() + mpActualPage->GetLeftBorder(),
aRect.Right() + mpActualPage->GetRightBorder(),
SID_ATTR_LONG_LRSPACE);
SvxLongULSpaceItem aULSpace(aPagePos.Y() + mpActualPage->GetUpperBorder(),
aRect.Bottom() + mpActualPage->GetLowerBorder(),
SID_ATTR_LONG_ULSPACE);
rSet.Put(SvxPagePosSizeItem(Point(0,0) - aPagePos, aViewSize.Width(),
aViewSize.Height()));
SfxPointItem aPointItem( SID_RULER_NULL_OFFSET, aPagePos + aOrigin );
SvxProtectItem aProtect( SID_RULER_PROTECT );
maMarkRect = mpDrawView->GetAllMarkedRect();
const bool bRTL = GetDoc() && GetDoc()->GetDefaultWritingMode() == css::text::WritingMode_RL_TB;
rSet.Put(SfxBoolItem(SID_RULER_TEXT_RIGHT_TO_LEFT, bRTL));
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
if( rMarkList.GetMarkCount() != 0 )
{
if( mpDrawView->IsTextEdit() )
{
SdrObject* pObj = rMarkList.GetMark( 0 )->GetMarkedSdrObj();
if( pObj->GetObjInventor() == SdrInventor::Default)
{
SfxItemSet aEditAttr( GetDoc()->GetPool() );
mpDrawView->GetAttributes( aEditAttr );
if( aEditAttr.GetItemState( EE_PARA_TABS ) >= SfxItemState::DEFAULT )
{
const SvxTabStopItem& rItem = aEditAttr.Get( EE_PARA_TABS );
rSet.Put( rItem );
const SvxLRSpaceItem& rLRSpaceItem = aEditAttr.Get( EE_PARA_LRSPACE );
SvxLRSpaceItem aLRSpaceItem( rLRSpaceItem.GetLeft(),
rLRSpaceItem.GetRight(),
rLRSpaceItem.GetTextFirstLineOffset(), SID_ATTR_PARA_LRSPACE );
const sal_Int16 nOutlineLevel = aEditAttr.Get( EE_PARA_OUTLLEVEL ).GetValue();
const SvxNumBulletItem& rNumBulletItem = aEditAttr.Get( EE_PARA_NUMBULLET );
if( nOutlineLevel != -1 &&
rNumBulletItem.GetNumRule().GetLevelCount() > nOutlineLevel )
{
const SvxNumberFormat& rFormat = rNumBulletItem.GetNumRule().GetLevel(nOutlineLevel);
aLRSpaceItem.SetTextLeft(rFormat.GetAbsLSpace() + rLRSpaceItem.GetTextLeft());
aLRSpaceItem.SetTextFirstLineOffset(
rLRSpaceItem.GetTextFirstLineOffset() + rFormat.GetFirstLineOffset()
//TODO: overflow
- rFormat.GetCharTextDistance());
}
rSet.Put( aLRSpaceItem );
Point aPos( aPagePos + maMarkRect.TopLeft() );
if ( aEditAttr.GetItemState( SDRATTR_TEXT_LEFTDIST ) == SfxItemState::SET )
{
const SdrMetricItem& rTLDItem = aEditAttr.Get( SDRATTR_TEXT_LEFTDIST );
::tools::Long nLD = rTLDItem.GetValue();
aPos.AdjustX(nLD );
}
aPointItem.SetValue( aPos );
::tools::Rectangle aParaRect(maMarkRect);
if (pObj->GetObjIdentifier() == SdrObjKind::Table)
{
sdr::table::SdrTableObj* pTable = static_cast<sdr::table::SdrTableObj*>(pObj);
sdr::table::CellPos cellpos;
pTable->getActiveCellPos(cellpos);
pTable->getCellBounds(cellpos, aParaRect);
}
aLRSpace.SetLeft(aPagePos.X() + aParaRect.Left());
if ( aEditAttr.GetItemState( SDRATTR_TEXT_LEFTDIST ) == SfxItemState::SET )
{
const SdrMetricItem& rTLDItem = aEditAttr.Get( SDRATTR_TEXT_LEFTDIST );
::tools::Long nLD = rTLDItem.GetValue();
aLRSpace.SetLeft( aLRSpace.GetLeft() + nLD );
}
aLRSpace.SetRight(aRect.Right() + aPageSize.Width() - aParaRect.Right());
if ( aEditAttr.GetItemState( SDRATTR_TEXT_RIGHTDIST ) == SfxItemState::SET )
{
const SdrMetricItem& rTRDItem = aEditAttr.Get( SDRATTR_TEXT_RIGHTDIST );
::tools::Long nRD = rTRDItem.GetValue();
aLRSpace.SetRight( aLRSpace.GetRight() + nRD );
}
aULSpace.SetUpper( aPagePos.Y() + maMarkRect.Top() );
aULSpace.SetLower( aRect.Bottom() + aPageSize.Height() - maMarkRect.Bottom() );
rSet.DisableItem( SID_RULER_OBJECT );
// lock page margins
aProtect.SetSizeProtect( true );
aProtect.SetPosProtect( true );
}
if( aEditAttr.GetItemState( EE_PARA_WRITINGDIR ) >= SfxItemState::DEFAULT )
{
const SvxFrameDirectionItem& rItem = aEditAttr.Get( EE_PARA_WRITINGDIR );
rSet.Put(SfxBoolItem(SID_RULER_TEXT_RIGHT_TO_LEFT, rItem.GetValue() == SvxFrameDirection::Horizontal_RL_TB));
}
}
}
else
{
rSet.DisableItem( EE_PARA_TABS );
rSet.DisableItem( SID_RULER_TEXT_RIGHT_TO_LEFT );
if( mpDrawView->IsResizeAllowed(true) )
{
::tools::Rectangle aResizeRect( maMarkRect );
aResizeRect.SetPos(aResizeRect.TopLeft() + aPagePos);
SvxObjectItem aObjItem(aResizeRect.Left(), aResizeRect.Right(),
aResizeRect.Top(), aResizeRect.Bottom());
rSet.Put(aObjItem);
rSet.DisableItem( EE_PARA_TABS );
}
else
{
rSet.DisableItem( SID_RULER_OBJECT );
}
}
}
else
{
rSet.DisableItem( SID_RULER_OBJECT );
rSet.DisableItem( EE_PARA_TABS );
}
rSet.Put( aLRSpace );
rSet.Put( aULSpace );
rSet.Put( aPointItem );
rSet.Put( aProtect );
}
void DrawViewShell::ExecStatusBar(SfxRequest& rReq)
{
// nothing is executed during a slide show!
if(HasCurrentFunction(SID_PRESENTATION))
return;
CheckLineTo (rReq);
switch ( rReq.GetSlot() )
{
case SID_ATTR_SIZE:
{
GetViewFrame()->GetDispatcher()->Execute( SID_ATTR_TRANSFORM, SfxCallMode::ASYNCHRON );
}
break;
case SID_STATUS_LAYOUT:
{
GetViewFrame()->GetDispatcher()->Execute( SID_PRESENTATION_LAYOUT, SfxCallMode::ASYNCHRON );
}
break;
case SID_STATUS_PAGE:
{
GetViewFrame()->GetDispatcher()->Execute(SID_GO_TO_PAGE,
SfxCallMode::SYNCHRON | SfxCallMode::RECORD);
}
break;
}
}
/**
* set state of snap object entries in popup
*/
void DrawViewShell::GetSnapItemState( SfxItemSet &rSet )
{
SdrPageView* pPV;
Point aMPos = GetActiveWindow()->PixelToLogic(maMousePos);
sal_uInt16 nHitLog = static_cast<sal_uInt16>(GetActiveWindow()->PixelToLogic(
Size(FuPoor::HITPIX,0)).Width());
sal_uInt16 nHelpLine;
if ( !mpDrawView->PickHelpLine(aMPos, nHitLog, *GetActiveWindow()->GetOutDev(), nHelpLine, pPV) )
return;
const SdrHelpLine& rHelpLine = (pPV->GetHelpLines())[nHelpLine];
if ( rHelpLine.GetKind() == SdrHelpLineKind::Point )
{
rSet.Put( SfxStringItem( SID_SET_SNAPITEM,
SdResId( STR_POPUP_EDIT_SNAPPOINT)) );
rSet.Put( SfxStringItem( SID_DELETE_SNAPITEM,
SdResId( STR_POPUP_DELETE_SNAPPOINT)) );
}
else
{
rSet.Put( SfxStringItem( SID_SET_SNAPITEM,
SdResId( STR_POPUP_EDIT_SNAPLINE)) );
rSet.Put( SfxStringItem( SID_DELETE_SNAPITEM,
SdResId( STR_POPUP_DELETE_SNAPLINE)) );
}
}
} // end of namespace sd
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V1037 Two or more case-branches perform the same actions. Check lines: 455, 461