/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <config_features.h>
#include <com/sun/star/presentation/XPresentation2.hpp>
#include <com/sun/star/form/FormButtonType.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <i18nutil/unicode.hxx>
#include <i18nutil/transliteration.hxx>
#include <com/sun/star/beans/PropertyValue.hpp>
#include <com/sun/star/uno/Any.hxx>
#include <LibreOfficeKit/LibreOfficeKitEnums.h>
#include <comphelper/lok.hxx>
#include <comphelper/propertyvalue.hxx>
#include <editeng/editstat.hxx>
#include <editeng/outlobj.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld/weld.hxx>
#include <svl/urlbmk.hxx>
#include <svx/clipfmtitem.hxx>
#include <svx/svdpagv.hxx>
#include <svx/svdopath.hxx>
#include <svx/svdundo.hxx>
#include <svx/svdorect.hxx>
#include <svl/eitem.hxx>
#include <svl/intitem.hxx>
#include <svl/poolitem.hxx>
#include <svl/stritem.hxx>
#include <editeng/eeitem.hxx>
#include <sfx2/dispatch.hxx>
#include <sfx2/viewfrm.hxx>
#include <sfx2/request.hxx>
#include <svx/svxids.hrc>
#include <editeng/flditem.hxx>
#include <svx/obj3d.hxx>
#include <svx/svdobjkind.hxx>
#include <svx/svdouno.hxx>
#include <svx/dataaccessdescriptor.hxx>
#include <tools/urlobj.hxx>
#include <sfx2/ipclient.hxx>
#include <avmedia/mediawindow.hxx>
#include <svl/urihelper.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/notebookbar/SfxNotebookBar.hxx>
#include <osl/diagnose.h>
#include <svl/cryptosign.hxx>
#include <tools/debug.hxx>
#include <DrawViewShell.hxx>
#include <slideshow.hxx>
#include <ViewShellHint.hxx>
#include <framework/FrameworkHelper.hxx>
#include <app.hrc>
#include <strings.hrc>
#include <drawdoc.hxx>
#include <fusel.hxx>
#include <futext.hxx>
#include <fuconrec.hxx>
#include <fuconcs.hxx>
#include <fuconuno.hxx>
#include <fuconbez.hxx>
#include <fuediglu.hxx>
#include <fuconarc.hxx>
#include <fucon3d.hxx>
#include <sdresid.hxx>
#include <unokywds.hxx>
#include <Outliner.hxx>
#include <sdpage.hxx>
#include <FrameView.hxx>
#include <zoomlist.hxx>
#include <drawview.hxx>
#include <DrawDocShell.hxx>
#include <ViewShellBase.hxx>
#include <ToolBarManager.hxx>
#include <anminfo.hxx>
#include <optsitem.hxx>
#include <Window.hxx>
#include <fuformatpaintbrush.hxx>
#include <fuzoom.hxx>
#include <sdmod.hxx>
#include <basegfx/utils/zoomtools.hxx>
#include <officecfg/Office/Draw.hxx>
#include <officecfg/Office/Impress.hxx>
#include <sfx2/lokhelper.hxx>
#include <SlideSorter.hxx>
#include <SlideSorterViewShell.hxx>
#include <controller/SlideSorterController.hxx>
#include <controller/SlsClipboard.hxx>
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::presentation;
using namespace ::com::sun::star::beans;
namespace sd {
// Permanent Functions
static void ImpAddPrintableCharactersToTextEdit(SfxRequest const & rReq, ::sd::View* pView)
{
// evtl. feed characters to activated textedit
const SfxItemSet* pSet = rReq.GetArgs();
if(!pSet)
return;
OUString aInputString;
if(SfxItemState::SET == pSet->GetItemState(SID_ATTR_CHAR))
aInputString = pSet->Get(SID_ATTR_CHAR).GetValue();
if(aInputString.isEmpty())
return;
OutlinerView* pOLV = pView->GetTextEditOutlinerView();
if(pOLV)
{
for(sal_Int32 a(0); a < aInputString.getLength(); a++)
{
vcl::KeyCode aKeyCode;
// tdf#38669 - create the key event using a Unicode character
KeyEvent aKeyEvent(aInputString[a], aKeyCode);
// add actual character
pOLV->PostKeyEvent(aKeyEvent);
}
}
}
void DrawViewShell::FuPermanent(SfxRequest& rReq)
{
// We do not execute a thing during a native slide show
if (SlideShow::IsRunning(GetViewShellBase()) && !SlideShow::IsInteractiveSlideshow(GetViewShellBase())) // IASS
return;
sal_uInt16 nSId = rReq.GetSlot();
if( HasCurrentFunction() &&
( nSId == SID_TEXTEDIT || nSId == SID_ATTR_CHAR || nSId == SID_TEXT_FITTOSIZE ||
nSId == SID_ATTR_CHAR_VERTICAL || nSId == SID_TEXT_FITTOSIZE_VERTICAL ) )
{
rtl::Reference<FuPoor> xFunc( GetCurrentFunction() );
FuText* pFuText = dynamic_cast< FuText* >( xFunc.get() );
if( pFuText )
{
pFuText->SetPermanent(true);
xFunc->ReceiveRequest( rReq );
Invalidate();
// evtl. feed characters to activated textedit
if(SID_ATTR_CHAR == nSId && GetView() && GetView()->IsTextEdit())
ImpAddPrintableCharactersToTextEdit(rReq, GetView());
rReq.Done();
return;
}
}
CheckLineTo (rReq);
sal_uInt16 nOldSId = 0;
bool bPermanent = false;
if( !mpDrawView )
return;
if(HasCurrentFunction())
{
if( (nSId == SID_FORMATPAINTBRUSH) && (GetCurrentFunction()->GetSlotID() == SID_TEXTEDIT) )
{
// save text edit mode for format paintbrush!
SetOldFunction( GetCurrentFunction() );
}
else
{
if(GetOldFunction() == GetCurrentFunction())
{
SetOldFunction(nullptr);
}
}
if ( nSId != SID_TEXTEDIT && nSId != SID_ATTR_CHAR && nSId != SID_TEXT_FITTOSIZE &&
nSId != SID_ATTR_CHAR_VERTICAL && nSId != SID_TEXT_FITTOSIZE_VERTICAL &&
nSId != SID_FORMATPAINTBRUSH &&
mpDrawView->IsTextEdit() )
{
mpDrawView->SdrEndTextEdit();
}
if( HasCurrentFunction() )
{
nOldSId = GetCurrentFunction()->GetSlotID();
if (nOldSId == nSId ||
((nOldSId == SID_TEXTEDIT || nOldSId == SID_ATTR_CHAR || nOldSId == SID_TEXT_FITTOSIZE ||
nOldSId == SID_ATTR_CHAR_VERTICAL || nOldSId == SID_TEXT_FITTOSIZE_VERTICAL) &&
(nSId == SID_TEXTEDIT || nSId == SID_ATTR_CHAR || nSId == SID_TEXT_FITTOSIZE ||
nSId == SID_ATTR_CHAR_VERTICAL || nSId == SID_TEXT_FITTOSIZE_VERTICAL )))
{
bPermanent = true;
}
GetCurrentFunction()->Deactivate();
}
SetCurrentFunction(nullptr);
SfxBindings& rBind = GetViewFrame()->GetBindings();
rBind.Invalidate(nOldSId);
rBind.Update(nOldSId);
}
// for LibreOfficeKit - choosing a shape should construct it directly
bool bCreateDirectly = false;
bool bRectangle = false;
switch ( nSId )
{
case SID_TEXTEDIT: // BASIC ???
case SID_ATTR_CHAR:
case SID_ATTR_CHAR_VERTICAL:
case SID_TEXT_FITTOSIZE:
case SID_TEXT_FITTOSIZE_VERTICAL:
{
SetCurrentFunction( FuText::Create(*this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq) );
GetCurrentFunction()->DoExecute(rReq);
SfxBindings& rBindings = GetViewFrame()->GetBindings();
rBindings.Invalidate( SID_ATTR_CHAR );
rBindings.Invalidate( SID_ATTR_CHAR_VERTICAL );
rBindings.Invalidate( SID_TEXT_FITTOSIZE );
rBindings.Invalidate( SID_TEXT_FITTOSIZE_VERTICAL );
// evtl. feed characters to activated textedit
if(SID_ATTR_CHAR == nSId && GetView() && GetView()->IsTextEdit())
ImpAddPrintableCharactersToTextEdit(rReq, GetView());
rReq.Done();
const SfxItemSet* pArgs = rReq.GetArgs();
if (pArgs && pArgs->HasItem(FN_PARAM_1))
bCreateDirectly = static_cast<const SfxBoolItem&>(pArgs->Get(FN_PARAM_1)).GetValue();
}
break;
case SID_FM_CREATE_CONTROL:
{
SetCurrentFunction( FuConstructUnoControl::Create( *this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq, bPermanent ) );
rReq.Done();
}
break;
case SID_FM_CREATE_FIELDCONTROL:
{
const SfxUnoAnyItem* pDescriptorItem = rReq.GetArg<SfxUnoAnyItem>(SID_FM_DATACCESS_DESCRIPTOR);
DBG_ASSERT( pDescriptorItem, "DrawViewShell::FuPermanent(SID_FM_CREATE_FIELDCONTROL): invalid request args!" );
if(pDescriptorItem)
{
// get the form view
FmFormView* pFormView = mpDrawView.get();
SdrPageView* pPageView = pFormView ? pFormView->GetSdrPageView() : nullptr;
if(pPageView)
{
svx::ODataAccessDescriptor aDescriptor(pDescriptorItem->GetValue());
rtl::Reference<SdrObject> pNewDBField = pFormView->CreateFieldControl(aDescriptor);
if(pNewDBField)
{
::tools::Rectangle aVisArea = GetActiveWindow()->PixelToLogic(::tools::Rectangle(Point(0,0), GetActiveWindow()->GetOutputSizePixel()));
Point aObjPos(aVisArea.Center());
Size aObjSize(pNewDBField->GetLogicRect().GetSize());
aObjPos.AdjustX( -(aObjSize.Width() / 2) );
aObjPos.AdjustY( -(aObjSize.Height() / 2) );
::tools::Rectangle aNewObjectRectangle(aObjPos, aObjSize);
pNewDBField->SetLogicRect(aNewObjectRectangle);
GetView()->InsertObjectAtView(pNewDBField.get(), *pPageView);
}
}
}
rReq.Done();
}
break;
case SID_OBJECT_SELECT:
case SID_OBJECT_ROTATE:
case SID_OBJECT_MIRROR:
case SID_OBJECT_CROP:
case SID_OBJECT_TRANSPARENCE:
case SID_OBJECT_GRADIENT:
case SID_OBJECT_SHEAR:
case SID_OBJECT_CROOK_ROTATE:
case SID_OBJECT_CROOK_SLANT:
case SID_OBJECT_CROOK_STRETCH:
case SID_CONVERT_TO_3D_LATHE:
{
sal_uInt16 nSlotId = rReq.GetSlot();
// toggle function
if( nOldSId == nSlotId )
{
nSlotId = SID_OBJECT_SELECT;
rReq.SetSlot( nSlotId );
}
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
if (nSlotId == SID_OBJECT_CROOK_ROTATE ||
nSlotId == SID_OBJECT_CROOK_SLANT ||
nSlotId == SID_OBJECT_CROOK_STRETCH)
{
if ( rMarkList.GetMarkCount() > 0 &&
!mpDrawView->IsCrookAllowed( mpDrawView->IsCrookNoContortion() ) )
{
if ( mpDrawView->IsPresObjSelected() )
{
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
SdResId(STR_ACTION_NOTPOSSIBLE)));
xInfoBox->run();
}
else
{
std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Question, VclButtonsType::YesNo,
SdResId(STR_ASK_FOR_CONVERT_TO_BEZIER)));
if (xQueryBox->run() == RET_YES )
{
// implicit transformation into bezier
weld::WaitObject aWait(GetFrameWeld());
mpDrawView->ConvertMarkedToPathObj(false);
}
}
}
}
else if (nSlotId == SID_OBJECT_SHEAR)
{
size_t i = 0;
const size_t nMarkCnt = rMarkList.GetMarkCount();
bool b3DObjMarked = false;
while (i < nMarkCnt && !b3DObjMarked)
{
if (DynCastE3dObject( rMarkList.GetMark(i)->GetMarkedSdrObj() ))
{
b3DObjMarked = true;
}
else
{
i++;
}
}
if ( nMarkCnt > 0 && !b3DObjMarked &&
(!mpDrawView->IsShearAllowed() || !mpDrawView->IsDistortAllowed()) )
{
if ( mpDrawView->IsPresObjSelected() )
{
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
SdResId(STR_ACTION_NOTPOSSIBLE)));
xInfoBox->run();
}
else
{
std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Question, VclButtonsType::YesNo,
SdResId(STR_ASK_FOR_CONVERT_TO_BEZIER)));
if (xQueryBox->run() == RET_YES)
{
// implicit transformation into bezier
weld::WaitObject aWait(GetFrameWeld());
mpDrawView->ConvertMarkedToPathObj(false);
}
}
}
}
SetCurrentFunction( FuSelection::Create(*this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq) );
rReq.Done();
Invalidate( SID_OBJECT_SELECT );
}
break;
case SID_DRAW_LINE:
case SID_DRAW_XLINE:
case SID_DRAW_MEASURELINE:
case SID_LINE_ARROW_START:
case SID_LINE_ARROW_END:
case SID_LINE_ARROWS:
case SID_LINE_ARROW_CIRCLE:
case SID_LINE_CIRCLE_ARROW:
case SID_LINE_ARROW_SQUARE:
case SID_LINE_SQUARE_ARROW:
case SID_DRAW_RECT:
case SID_DRAW_RECT_NOFILL:
case SID_DRAW_RECT_ROUND:
case SID_DRAW_RECT_ROUND_NOFILL:
case SID_DRAW_SQUARE:
case SID_DRAW_SQUARE_NOFILL:
case SID_DRAW_SQUARE_ROUND:
case SID_DRAW_SQUARE_ROUND_NOFILL:
case SID_DRAW_ELLIPSE:
case SID_DRAW_ELLIPSE_NOFILL:
case SID_DRAW_CIRCLE:
case SID_DRAW_CIRCLE_NOFILL:
case SID_DRAW_CAPTION:
case SID_DRAW_CAPTION_VERTICAL:
case SID_TOOL_CONNECTOR:
case SID_CONNECTOR_ARROW_START:
case SID_CONNECTOR_ARROW_END:
case SID_CONNECTOR_ARROWS:
case SID_CONNECTOR_CIRCLE_START:
case SID_CONNECTOR_CIRCLE_END:
case SID_CONNECTOR_CIRCLES:
case SID_CONNECTOR_LINE:
case SID_CONNECTOR_LINE_ARROW_START:
case SID_CONNECTOR_LINE_ARROW_END:
case SID_CONNECTOR_LINE_ARROWS:
case SID_CONNECTOR_LINE_CIRCLE_START:
case SID_CONNECTOR_LINE_CIRCLE_END:
case SID_CONNECTOR_LINE_CIRCLES:
case SID_CONNECTOR_CURVE:
case SID_CONNECTOR_CURVE_ARROW_START:
case SID_CONNECTOR_CURVE_ARROW_END:
case SID_CONNECTOR_CURVE_ARROWS:
case SID_CONNECTOR_CURVE_CIRCLE_START:
case SID_CONNECTOR_CURVE_CIRCLE_END:
case SID_CONNECTOR_CURVE_CIRCLES:
case SID_CONNECTOR_LINES:
case SID_CONNECTOR_LINES_ARROW_START:
case SID_CONNECTOR_LINES_ARROW_END:
case SID_CONNECTOR_LINES_ARROWS:
case SID_CONNECTOR_LINES_CIRCLE_START:
case SID_CONNECTOR_LINES_CIRCLE_END:
case SID_CONNECTOR_LINES_CIRCLES:
case SID_INSERT_SIGNATURELINE:
{
if (nSId == SID_INSERT_SIGNATURELINE)
{
// See if a signing cert is passed as a parameter: if so, parse that.
std::string aSignatureCert;
std::string aSignatureKey;
const SfxStringItem* pSignatureCert = rReq.GetArg<SfxStringItem>(FN_PARAM_1);
if (pSignatureCert)
{
aSignatureCert = pSignatureCert->GetValue().toUtf8();
}
const SfxStringItem* pSignatureKey = rReq.GetArg<SfxStringItem>(FN_PARAM_2);
if (pSignatureKey)
{
aSignatureKey = pSignatureKey->GetValue().toUtf8();
}
bool bExternal = false;
const SfxBoolItem* pExternal = rReq.GetArg<SfxBoolItem>(FN_PARAM_3);
if (pExternal)
{
bExternal = pExternal->GetValue();
}
SfxViewFrame* pFrame = GetFrame();
SfxViewShell* pViewShell = pFrame ? pFrame->GetViewShell() : nullptr;
if (pViewShell)
{
svl::crypto::CertificateOrName aCertificateOrName;
if (!aSignatureCert.empty() && !aSignatureKey.empty())
{
aCertificateOrName.m_xCertificate = SfxLokHelper::getSigningCertificate(aSignatureCert, aSignatureKey);
}
else if (bExternal)
{
aCertificateOrName.m_aName = mpDrawView->GetAuthor();
}
// Always set the signing certificate, to clear data from a previous dispatch.
pViewShell->SetSigningCertificate(aCertificateOrName);
}
}
bCreateDirectly = comphelper::LibreOfficeKit::isActive();
bRectangle = true;
SetCurrentFunction( FuConstructRectangle::Create( *this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq, bPermanent ) );
rReq.Done();
}
break;
case SID_DRAW_POLYGON:
case SID_DRAW_POLYGON_NOFILL:
case SID_DRAW_XPOLYGON:
case SID_DRAW_XPOLYGON_NOFILL:
case SID_DRAW_FREELINE:
case SID_DRAW_FREELINE_NOFILL:
case SID_DRAW_BEZIER_FILL: // BASIC
case SID_DRAW_BEZIER_NOFILL: // BASIC
{
// Direct mode means no interactive drawing, just insert the shape with reasonable
// defaults -- to be consistent with the line insert case above.
bCreateDirectly = comphelper::LibreOfficeKit::isActive();
SetCurrentFunction( FuConstructBezierPolygon::Create(*this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq, bPermanent) );
rReq.Done();
}
break;
case SID_GLUE_EDITMODE:
{
if (nOldSId != SID_GLUE_EDITMODE)
{
SetCurrentFunction( FuEditGluePoints::Create( *this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq, bPermanent ) );
}
else
{
GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
}
rReq.Done();
}
break;
case SID_DRAW_ARC:
case SID_DRAW_CIRCLEARC:
case SID_DRAW_PIE:
case SID_DRAW_PIE_NOFILL:
case SID_DRAW_CIRCLEPIE:
case SID_DRAW_CIRCLEPIE_NOFILL:
case SID_DRAW_ELLIPSECUT:
case SID_DRAW_ELLIPSECUT_NOFILL:
case SID_DRAW_CIRCLECUT:
case SID_DRAW_CIRCLECUT_NOFILL:
{
SetCurrentFunction( FuConstructArc::Create( *this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq, bPermanent) );
rReq.Done();
}
break;
case SID_3D_CUBE:
case SID_3D_SHELL:
case SID_3D_SPHERE:
case SID_3D_TORUS:
case SID_3D_HALF_SPHERE:
case SID_3D_CYLINDER:
case SID_3D_CONE:
case SID_3D_PYRAMID:
{
SetCurrentFunction( FuConstruct3dObject::Create(*this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq, bPermanent ) );
rReq.Done();
}
break;
case SID_DRAWTBX_CS_BASIC :
case SID_DRAWTBX_CS_SYMBOL :
case SID_DRAWTBX_CS_ARROW :
case SID_DRAWTBX_CS_FLOWCHART :
case SID_DRAWTBX_CS_CALLOUT :
case SID_DRAWTBX_CS_STAR :
case SID_DRAW_CS_ID :
{
SetCurrentFunction( FuConstructCustomShape::Create( *this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq, bPermanent ) );
rReq.Done();
bCreateDirectly = comphelper::LibreOfficeKit::isActive();
const SfxItemSet* pArgs = rReq.GetArgs();
if (pArgs && pArgs->HasItem(FN_PARAM_1))
{
bCreateDirectly = static_cast<const SfxBoolItem&>(pArgs->Get(FN_PARAM_1)).GetValue();
}
if ( nSId != SID_DRAW_CS_ID )
{
SfxBindings& rBind = GetViewFrame()->GetBindings();
rBind.Invalidate( nSId );
rBind.Update( nSId );
}
}
break;
case SID_FORMATPAINTBRUSH:
{
SetCurrentFunction( FuFormatPaintBrush::Create( *this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq ) );
rReq.Done();
SfxBindings& rBind = GetViewFrame()->GetBindings();
rBind.Invalidate( nSId );
rBind.Update( nSId );
break;
}
case SID_ZOOM_MODE:
case SID_ZOOM_PANNING:
{
if (nOldSId != nSId)
{
mbZoomOnPage = false;
SetCurrentFunction( FuZoom::Create(*this, GetActiveWindow(), mpDrawView.get(), *GetDoc(), rReq ) );
}
else
{
GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
}
rReq.Done();
}
break;
default:
break;
}
if(HasOldFunction())
{
sal_uInt16 nSlotId = GetOldFunction()->GetSlotID();
GetOldFunction()->Deactivate();
SetOldFunction(nullptr);
SfxBindings& rBind = GetViewFrame()->GetBindings();
rBind.Invalidate( nSlotId );
rBind.Update( nSlotId );
}
if(HasCurrentFunction())
{
GetCurrentFunction()->Activate();
SetOldFunction( GetCurrentFunction() );
}
// invalidate shell, is faster than every individually (says MI)
// now explicit the last slot incl. Update()
Invalidate();
// CTRL-SID_OBJECT_SELECT -> select first draw object if none is selected yet
if(SID_OBJECT_SELECT == nSId && HasCurrentFunction() && (rReq.GetModifier() & KEY_MOD1))
{
const SdrMarkList& rMarkList = GetView()->GetMarkedObjectList();
if(rMarkList.GetMarkCount() == 0)
{
// select first object
GetView()->UnmarkAllObj();
GetView()->MarkNextObj(true);
// ...and make it visible
if(rMarkList.GetMarkCount() != 0)
GetView()->MakeVisible(GetView()->GetAllMarkedRect(), *GetActiveWindow());
}
}
// with qualifier construct directly
if(!(HasCurrentFunction() && ((rReq.GetModifier() & KEY_MOD1) || bCreateDirectly)))
return;
// get SdOptions
SdOptions* pOptions = SdModule::get()->GetSdOptions(GetDoc()->GetDocumentType());
sal_uInt32 nDefaultObjectSizeWidth(pOptions->GetDefaultObjectSizeWidth());
sal_uInt32 nDefaultObjectSizeHeight(pOptions->GetDefaultObjectSizeHeight());
if (nSId == SID_INSERT_SIGNATURELINE)
{
// Half of the default to better match the space available for signatures in many real-world
// documents.
nDefaultObjectSizeWidth *= 0.5;
nDefaultObjectSizeHeight *= 0.5;
}
// calc position and size
::tools::Rectangle aVisArea = GetActiveWindow()->PixelToLogic(::tools::Rectangle(Point(0,0), GetActiveWindow()->GetOutputSizePixel()));
if (comphelper::LibreOfficeKit::isActive())
{
// aVisArea is nonsensical in the LOK case, use the slide size
aVisArea = ::tools::Rectangle(Point(), getCurrentPage()->GetSize());
}
Point aPagePos = aVisArea.Center();
aPagePos.AdjustX( -sal_Int32(nDefaultObjectSizeWidth / 2) );
aPagePos.AdjustY( -sal_Int32(nDefaultObjectSizeHeight / 2) );
::tools::Rectangle aNewObjectRectangle(aPagePos, Size(nDefaultObjectSizeWidth, nDefaultObjectSizeHeight));
SdrPageView* pPageView = mpDrawView->GetSdrPageView();
if(!pPageView)
return;
// create the default object
rtl::Reference<SdrObject> pObj = GetCurrentFunction()->CreateDefaultObject(nSId, aNewObjectRectangle);
if(!pObj)
return;
auto pObjTmp = pObj.get();
// insert into page
GetView()->InsertObjectAtView(pObj.get(), *pPageView);
// Now that pFuActual has done what it was created for we
// can switch on the edit mode for callout objects.
switch (nSId)
{
case SID_DRAW_CAPTION:
case SID_DRAW_CAPTION_VERTICAL:
case SID_ATTR_CHAR:
case SID_ATTR_CHAR_VERTICAL:
case SID_TEXT_FITTOSIZE:
case SID_TEXT_FITTOSIZE_VERTICAL:
{
// Make FuText the current function.
SfxUInt16Item aItem (SID_TEXTEDIT, 1);
GetViewFrame()->GetDispatcher()->
ExecuteList(SID_TEXTEDIT, SfxCallMode::SYNCHRON |
SfxCallMode::RECORD, { &aItem });
// Put text object into edit mode.
GetView()->SdrBeginTextEdit(static_cast<SdrTextObj*>(pObjTmp), pPageView);
break;
}
}
if (bRectangle && !bPermanent)
{
GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
}
}
void DrawViewShell::FuDeleteSelectedObjects()
{
if( !mpDrawView )
return;
bool bConsumed = false;
//if any placeholders are selected
if (mpDrawView->IsPresObjSelected(false))
{
//If there are placeholders in the list which can be toggled
//off in edit->master->master elements then do that here,
std::vector<SdrObject*> aPresMarksToRemove;
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
for (size_t i=0; i < rMarkList.GetMarkCount(); ++i)
{
SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
SdPage* pPage = static_cast<SdPage*>(pObj->getSdrPageFromSdrObject());
PresObjKind eKind = pPage->GetPresObjKind(pObj);
if (eKind == PresObjKind::Footer || eKind == PresObjKind::Header ||
eKind == PresObjKind::DateTime || eKind == PresObjKind::SlideNumber)
{
aPresMarksToRemove.push_back(pObj);
}
}
for (SdrObject* pObj : aPresMarksToRemove)
{
//Unmark object
mpDrawView->MarkObj(pObj, mpDrawView->GetSdrPageView(), true);
SdPage* pPage = static_cast<SdPage*>(pObj->getSdrPageFromSdrObject());
//remove placeholder from master page
pPage->DestroyDefaultPresObj(pPage->GetPresObjKind(pObj));
}
bConsumed = true;
}
// placeholders which cannot be deleted selected
if (mpDrawView->IsPresObjSelected(false, true, false, true))
{
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
SdResId(STR_ACTION_NOTPOSSIBLE)));
xInfoBox->run();
bConsumed = true;
}
if (bConsumed)
return;
vcl::KeyCode aKCode(KEY_DELETE);
KeyEvent aKEvt( 0, aKCode);
bConsumed = mpDrawView->getSmartTags().KeyInput( aKEvt );
if (!bConsumed && HasCurrentFunction())
bConsumed = GetCurrentFunction()->KeyInput(aKEvt);
if (!bConsumed)
mpDrawView->DeleteMarked();
}
void DrawViewShell::FuSupport(SfxRequest& rReq)
{
if( rReq.GetSlot() == SID_STYLE_FAMILY && rReq.GetArgs())
GetDocSh()->SetStyleFamily(static_cast<SfxStyleFamily>(rReq.GetArgs()->Get( SID_STYLE_FAMILY ).GetValue()));
// We do not execute a thing during a native slide show
if((SlideShow::IsRunning(GetViewShellBase())
&& !SlideShow::IsInteractiveSlideshow(GetViewShellBase())) // IASS
&& (rReq.GetSlot() != SID_PRESENTATION_END && rReq.GetSlot() != SID_SIZE_PAGE))
return;
CheckLineTo (rReq);
if( !mpDrawView )
return;
sal_uInt16 nSId = rReq.GetSlot();
switch ( nSId )
{
case SID_CLEAR_UNDO_STACK:
{
GetDocSh()->ClearUndoBuffer();
rReq.Ignore ();
}
break;
case SID_PRESENTATION:
case SID_PRESENTATION_CURRENT_SLIDE:
case SID_REHEARSE_TIMINGS:
{
slideshowhelp::ShowSlideShow(rReq, *GetDoc());
rReq.Ignore ();
}
break;
case SID_PRESENTATION_END:
{
StopSlideShow();
rReq.Ignore ();
}
break;
case SID_BEZIER_EDIT:
{
mpDrawView->SetFrameDragSingles(!mpDrawView->IsFrameDragSingles());
/******************************************************************
* turn ObjectBar on
******************************************************************/
if( dynamic_cast< FuSelection* >( GetCurrentFunction().get() ) || dynamic_cast< FuConstructBezierPolygon* >( GetCurrentFunction().get() ) )
{
// Tell the tool bar manager about the context change.
GetViewShellBase().GetToolBarManager()->SelectionHasChanged(*this,*mpDrawView);
}
Invalidate(SID_BEZIER_EDIT);
rReq.Ignore();
}
break;
case SID_OBJECT_CLOSE:
{
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
if ( rMarkList.GetMark(0) && !mpDrawView->IsAction() )
{
SdrPathObj* pPathObj = static_cast<SdrPathObj*>( rMarkList.GetMark(0)->GetMarkedSdrObj());
const bool bUndo = mpDrawView->IsUndoEnabled();
if( bUndo )
mpDrawView->BegUndo(SdResId(STR_UNDO_BEZCLOSE));
mpDrawView->UnmarkAllPoints();
if( bUndo )
mpDrawView->AddUndo(std::make_unique<SdrUndoGeoObj>(*pPathObj));
pPathObj->ToggleClosed();
if( bUndo )
mpDrawView->EndUndo();
}
rReq.Done();
}
break;
case SID_CUT:
{
if ( mpDrawView->IsPresObjSelected(false, true, false, true) )
{
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
SdResId(STR_ACTION_NOTPOSSIBLE)));
xInfoBox->run();
}
else
{
//tdf#126197: EndTextEdit in all views if current one is not in TextEdit
if ( !mpDrawView->IsTextEdit() )
mpDrawView->EndTextEditAllViews();
if(HasCurrentFunction())
{
GetCurrentFunction()->DoCut();
}
else if(mpDrawView)
{
mpDrawView->DoCut();
}
}
rReq.Ignore ();
}
break;
case SID_COPY:
{
if ( mpDrawView->IsPresObjSelected(false, true, false, true) )
{
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
SdResId(STR_ACTION_NOTPOSSIBLE)));
xInfoBox->run();
}
else
{
if(HasCurrentFunction())
{
GetCurrentFunction()->DoCopy();
}
else if( mpDrawView )
{
mpDrawView->DoCopy();
}
}
rReq.Ignore ();
}
break;
case SID_PASTE:
{
weld::WaitObject aWait(GetFrameWeld());
if(HasCurrentFunction())
{
GetCurrentFunction()->DoPaste();
}
else if(mpDrawView)
{
mpDrawView->DoPaste();
}
rReq.Ignore ();
}
break;
case SID_PASTE_SLIDE:
case SID_COPY_SLIDE:
{
if (::sd::slidesorter::SlideSorterViewShell* pSlideSorterViewShell =
sd::slidesorter::SlideSorterViewShell::GetSlideSorter(GetViewShellBase()))
pSlideSorterViewShell->GetSlideSorter().GetController().FuSupport(rReq);
Cancel();
rReq.Done();
}
break;
case SID_UNICODE_NOTATION_TOGGLE:
{
if( mpDrawView->IsTextEdit() )
{
OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
if( pOLV )
{
OUString sInput = pOLV->GetSurroundingText();
ESelection aSel( pOLV->GetSelection() );
if (aSel.start.nIndex > aSel.end.nIndex)
aSel.end.nIndex = aSel.start.nIndex;
//calculate a valid end-position by reading logical characters
sal_Int32 nUtf16Pos=0;
while ((nUtf16Pos < sInput.getLength()) && (nUtf16Pos < aSel.end.nIndex))
{
sInput.iterateCodePoints(&nUtf16Pos);
//The mouse can set the cursor in the middle of a multi-unit character,
// so reset to the proper end of the logical characters
if (nUtf16Pos > aSel.end.nIndex)
aSel.end.nIndex = nUtf16Pos;
}
ToggleUnicodeCodepoint aToggle;
while( nUtf16Pos && aToggle.AllowMoreInput( sInput[nUtf16Pos-1]) )
--nUtf16Pos;
OUString sReplacement = aToggle.ReplacementString();
if( !sReplacement.isEmpty() )
{
OUString sStringToReplace = aToggle.StringToReplace();
mpDrawView->BegUndo(sStringToReplace +"->"+ sReplacement);
aSel.start.nIndex = aSel.end.nIndex - sStringToReplace.getLength();
pOLV->SetSelection( aSel );
pOLV->InsertText(sReplacement, true);
mpDrawView->EndUndo();
}
}
}
}
break;
case SID_PASTE_UNFORMATTED:
{
weld::WaitObject aWait(GetFrameWeld());
if(HasCurrentFunction())
{
GetCurrentFunction()->DoPasteUnformatted();
}
else if(mpDrawView)
{
TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( GetActiveWindow() ) );
if (aDataHelper.GetTransferable().is())
{
sal_Int8 nAction = DND_ACTION_COPY;
mpDrawView->InsertData( aDataHelper,
GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(), GetActiveWindow()->GetOutputSizePixel() ).Center() ),
nAction, false, SotClipboardFormatId::STRING);
}
}
rReq.Ignore ();
}
break;
case SID_CLIPBOARD_FORMAT_ITEMS:
{
weld::WaitObject aWait(GetFrameWeld());
TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( GetActiveWindow() ) );
const SfxItemSet* pReqArgs = rReq.GetArgs();
SotClipboardFormatId nFormat = SotClipboardFormatId::NONE;
if( pReqArgs )
{
const SfxUInt32Item* pIsActive = rReq.GetArg<SfxUInt32Item>(SID_CLIPBOARD_FORMAT_ITEMS);
nFormat = static_cast<SotClipboardFormatId>(pIsActive->GetValue());
}
if( nFormat != SotClipboardFormatId::NONE && aDataHelper.GetTransferable().is() )
{
sal_Int8 nAction = DND_ACTION_COPY;
if( !mpDrawView->InsertData( aDataHelper,
GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(), GetActiveWindow()->GetOutputSizePixel() ).Center() ),
nAction, false, nFormat ) )
{
INetBookmark aINetBookmark( u""_ustr, u""_ustr );
if( ( aDataHelper.HasFormat( SotClipboardFormatId::NETSCAPE_BOOKMARK ) &&
aDataHelper.GetINetBookmark( SotClipboardFormatId::NETSCAPE_BOOKMARK, aINetBookmark ) ) ||
( aDataHelper.HasFormat( SotClipboardFormatId::FILEGRPDESCRIPTOR ) &&
aDataHelper.GetINetBookmark( SotClipboardFormatId::FILEGRPDESCRIPTOR, aINetBookmark ) ) ||
( aDataHelper.HasFormat( SotClipboardFormatId::UNIFORMRESOURCELOCATOR ) &&
aDataHelper.GetINetBookmark( SotClipboardFormatId::UNIFORMRESOURCELOCATOR, aINetBookmark ) ) )
{
InsertURLField(aINetBookmark.GetURL(), aINetBookmark.GetDescription(), u""_ustr, u""_ustr);
}
}
}
}
break;
case SID_DELETE:
{
if ( mpDrawView->IsTextEdit() )
{
OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
if (pOLV)
{
vcl::KeyCode aKCode(KEY_DELETE);
KeyEvent aKEvt( 0, aKCode);
// We use SdrObjEditView to handle DEL for underflow handling
(void)mpDrawView->KeyInput(aKEvt, nullptr);
}
}
else
{
mpDrawView->EndTextEditAllViews();
FuDeleteSelectedObjects();
}
rReq.Ignore ();
}
break;
case SID_NOTES_MODE:
case SID_SLIDE_MASTER_MODE:
case SID_NOTES_MASTER_MODE:
case SID_HANDOUT_MASTER_MODE:
// AutoLayouts have to be ready.
GetDoc()->StopWorkStartupDelay();
[[fallthrough]];
case SID_DRAWINGMODE:
case SID_SLIDE_SORTER_MODE:
case SID_OUTLINE_MODE:
// Let the sub-shell manager handle the slot handling.
framework::FrameworkHelper::Instance(GetViewShellBase())->HandleModeChangeSlot(
nSId,
rReq);
rReq.Ignore ();
break;
case SID_MASTERPAGE: // BASIC
{
// AutoLayouts needs to be finished
GetDoc()->StopWorkStartupDelay();
const SfxItemSet* pReqArgs = rReq.GetArgs();
if ( pReqArgs )
{
const SfxBoolItem* pIsActive = rReq.GetArg<SfxBoolItem>(SID_MASTERPAGE);
mbIsLayerModeActive = pIsActive->GetValue ();
}
Broadcast (
ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_START));
// turn on default layer of MasterPage
mpDrawView->SetActiveLayer(sUNO_LayerName_background_objects);
ChangeEditMode(EditMode::MasterPage, mbIsLayerModeActive);
if(HasCurrentFunction(SID_BEZIER_EDIT))
GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
Broadcast (
ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_END));
InvalidateWindows();
Invalidate();
rReq.Done();
}
break;
case SID_CLOSE_MASTER_VIEW:
{
Broadcast (
ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_START));
// Switch page back to the first one. Not doing so leads to a
// crash. This seems to be some bug in the edit mode switching
// and page switching methods.
SwitchPage (0);
ChangeEditMode(EditMode::Page, IsLayerModeActive());
Broadcast (
ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_END));
if(HasCurrentFunction(SID_BEZIER_EDIT))
{
GetViewFrame()->GetDispatcher()->Execute(
SID_OBJECT_SELECT,
SfxCallMode::ASYNCHRON);
}
rReq.Done();
}
break;
case SID_RULER:
{
const SfxItemSet* pReqArgs = rReq.GetArgs();
// Remember old ruler state
bool bOldHasRuler(HasRuler());
if ( pReqArgs )
{
const SfxBoolItem* pIsActive = rReq.GetArg<SfxBoolItem>(SID_RULER);
SetRuler (pIsActive->GetValue ());
}
else SetRuler (!HasRuler());
// Did ruler state change? Tell that to SdOptions, too.
bool bHasRuler(HasRuler());
if(bOldHasRuler != bHasRuler)
{
std::shared_ptr<comphelper::ConfigurationChanges> batch(
comphelper::ConfigurationChanges::create());
if (GetDoc()->GetDocumentType() == DocumentType::Impress)
{
officecfg::Office::Impress::Layout::Display::Ruler::set(bHasRuler, batch);
}
else
{
officecfg::Office::Draw::Layout::Display::Ruler::set(bHasRuler, batch);
}
batch->commit();
}
Invalidate (SID_RULER);
Resize();
rReq.Done ();
}
break;
case SID_SIZE_PAGE:
case SID_SIZE_PAGE_WIDTH: // BASIC
{
mbZoomOnPage = ( rReq.GetSlot() == SID_SIZE_PAGE );
SdrPageView* pPageView = mpDrawView->GetSdrPageView();
if ( pPageView )
{
Point aPagePos(0, 0); // = pPageView->GetOffset();
Size aPageSize = pPageView->GetPage()->GetSize();
aPagePos.AdjustX(aPageSize.Width() / 2 );
aPageSize.setWidth( static_cast<::tools::Long>(aPageSize.Width() * 1.03) );
if( rReq.GetSlot() == SID_SIZE_PAGE )
{
aPagePos.AdjustY(aPageSize.Height() / 2 );
aPageSize.setHeight( static_cast<::tools::Long>(aPageSize.Height() * 1.03) );
aPagePos.AdjustY( -(aPageSize.Height() / 2) );
}
else
{
Point aPt = GetActiveWindow()->PixelToLogic( Point( 0, GetActiveWindow()->GetSizePixel().Height() / 2 ) );
aPagePos.AdjustY(aPt.Y() );
aPageSize.setHeight( 2 );
}
aPagePos.AdjustX( -(aPageSize.Width() / 2) );
SetZoomRect( ::tools::Rectangle( aPagePos, aPageSize ) );
::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
GetActiveWindow()->GetOutputSizePixel()) );
mpZoomList->InsertZoomRect(aVisAreaWin);
}
Invalidate( SID_ZOOM_IN );
Invalidate( SID_ZOOM_OUT );
Invalidate( SID_ZOOM_PANNING );
rReq.Done ();
}
break;
case SID_SIZE_REAL: // BASIC
{
mbZoomOnPage = false;
SetZoom( 100 );
::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
GetActiveWindow()->GetOutputSizePixel()) );
mpZoomList->InsertZoomRect(aVisAreaWin);
Invalidate( SID_ZOOM_IN );
Invalidate( SID_ZOOM_OUT );
Invalidate( SID_ZOOM_PANNING );
rReq.Done ();
}
break;
case SID_ZOOM_OUT: // BASIC
{
const sal_uInt16 nOldZoom = GetActiveWindow()->GetZoom();
const sal_uInt16 nNewZoom = basegfx::zoomtools::zoomOut(nOldZoom);
SetZoom(nNewZoom);
mbZoomOnPage = false;
::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
GetActiveWindow()->GetOutputSizePixel()) );
mpZoomList->InsertZoomRect(aVisAreaWin);
Invalidate( SID_ZOOM_IN );
Invalidate( SID_ZOOM_OUT );
Invalidate( SID_ZOOM_PANNING );
rReq.Done ();
}
break;
case SID_ZOOM_IN:
{
const sal_uInt16 nOldZoom = GetActiveWindow()->GetZoom();
const sal_uInt16 nNewZoom = basegfx::zoomtools::zoomIn(nOldZoom);
SetZoom(nNewZoom);
mbZoomOnPage = false;
::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
GetActiveWindow()->GetOutputSizePixel()) );
mpZoomList->InsertZoomRect(aVisAreaWin);
Invalidate( SID_ZOOM_IN );
Invalidate(SID_ZOOM_OUT);
Invalidate( SID_ZOOM_PANNING );
rReq.Done ();
}
break;
case SID_SIZE_VISAREA:
{
::tools::Rectangle aVisArea = mpFrameView->GetVisArea();
Size aVisAreaSize = aVisArea.GetSize();
if (!aVisAreaSize.IsEmpty())
{
mbZoomOnPage = false;
SetZoomRect(aVisArea);
Invalidate( SID_ZOOM_IN );
Invalidate( SID_ZOOM_OUT );
Invalidate( SID_ZOOM_PANNING );
}
rReq.Done ();
}
break;
// name confusion: SID_SIZE_OPTIMAL -> Zoom onto selected objects
// --> Is offered as object zoom in program
case SID_SIZE_OPTIMAL: // BASIC
{
mbZoomOnPage = false;
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
if ( rMarkList.GetMarkCount() != 0 )
{
maMarkRect = mpDrawView->GetAllMarkedRect();
::tools::Long nW = static_cast<::tools::Long>(maMarkRect.GetWidth() * 1.03);
::tools::Long nH = static_cast<::tools::Long>(maMarkRect.GetHeight() * 1.03);
Point aPos = maMarkRect.Center();
aPos.AdjustX( -(nW / 2) );
aPos.AdjustY( -(nH / 2) );
if ( nW && nH )
{
SetZoomRect(::tools::Rectangle(aPos, Size(nW, nH)));
::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
GetActiveWindow()->GetOutputSizePixel()) );
mpZoomList->InsertZoomRect(aVisAreaWin);
}
}
Invalidate( SID_ZOOM_IN );
Invalidate( SID_ZOOM_OUT );
Invalidate( SID_ZOOM_PANNING );
rReq.Done ();
}
break;
// name confusion: SID_SIZE_ALL -> Zoom onto all objects
// --> Is offered as optimal in program
case SID_SIZE_ALL: // BASIC
{
mbZoomOnPage = false;
SdrPageView* pPageView = mpDrawView->GetSdrPageView();
if( pPageView )
{
::tools::Rectangle aBoundRect( pPageView->GetObjList()->GetAllObjBoundRect() );
::tools::Long nW = static_cast<::tools::Long>(aBoundRect.GetWidth() * 1.03);
::tools::Long nH = static_cast<::tools::Long>(aBoundRect.GetHeight() * 1.03);
Point aPos = aBoundRect.Center();
aPos.AdjustX( -(nW / 2) );
aPos.AdjustY( -(nH / 2) );
if ( nW && nH )
{
SetZoomRect( ::tools::Rectangle( aPos, Size( nW, nH ) ) );
::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0),
GetActiveWindow()->GetOutputSizePixel()) );
mpZoomList->InsertZoomRect(aVisAreaWin);
}
Invalidate( SID_ZOOM_IN );
Invalidate( SID_ZOOM_OUT );
Invalidate( SID_ZOOM_PANNING );
}
rReq.Done ();
}
break;
case SID_ZOOM_PREV:
{
if (mpDrawView->IsTextEdit())
{
mpDrawView->SdrEndTextEdit();
}
if (mpZoomList->IsPreviousPossible())
{
// set previous ZoomRect
SetZoomRect(mpZoomList->GetPreviousZoomRect());
}
rReq.Done ();
}
break;
case SID_ZOOM_NEXT:
{
if (mpDrawView->IsTextEdit())
{
mpDrawView->SdrEndTextEdit();
}
if (mpZoomList->IsNextPossible())
{
// set next ZoomRect
SetZoomRect(mpZoomList->GetNextZoomRect());
}
rReq.Done ();
}
break;
case SID_GLUE_INSERT_POINT:
case SID_GLUE_PERCENT:
case SID_GLUE_ESCDIR:
case SID_GLUE_ESCDIR_LEFT:
case SID_GLUE_ESCDIR_RIGHT:
case SID_GLUE_ESCDIR_TOP:
case SID_GLUE_ESCDIR_BOTTOM:
case SID_GLUE_HORZALIGN_CENTER:
case SID_GLUE_HORZALIGN_LEFT:
case SID_GLUE_HORZALIGN_RIGHT:
case SID_GLUE_VERTALIGN_CENTER:
case SID_GLUE_VERTALIGN_TOP:
case SID_GLUE_VERTALIGN_BOTTOM:
{
rtl::Reference<FuPoor> xFunc( GetCurrentFunction() );
FuEditGluePoints* pFunc = dynamic_cast< FuEditGluePoints* >( xFunc.get() );
if(pFunc)
pFunc->ReceiveRequest(rReq);
rReq.Done();
}
break;
case SID_AUTOSPELL_CHECK:
{
bool bOnlineSpell;
const SfxPoolItem* pItem;
if (rReq.GetArgs()->HasItem(FN_PARAM_1, &pItem))
bOnlineSpell = static_cast<const SfxBoolItem*>(pItem)->GetValue();
else // Toggle
bOnlineSpell = !GetDoc()->GetOnlineSpell();
GetDoc()->SetOnlineSpell(bOnlineSpell);
::Outliner* pOL = mpDrawView->GetTextEditOutliner();
if (pOL)
{
EEControlBits nCntrl = pOL->GetControlWord();
if (bOnlineSpell)
nCntrl |= EEControlBits::ONLINESPELLING;
else
nCntrl &= ~EEControlBits::ONLINESPELLING;
pOL->SetControlWord(nCntrl);
}
GetActiveWindow()->Invalidate();
rReq.Done ();
}
break;
case SID_TRANSLITERATE_SENTENCE_CASE:
case SID_TRANSLITERATE_TITLE_CASE:
case SID_TRANSLITERATE_TOGGLE_CASE:
case SID_TRANSLITERATE_UPPER:
case SID_TRANSLITERATE_LOWER:
case SID_TRANSLITERATE_HALFWIDTH:
case SID_TRANSLITERATE_FULLWIDTH:
case SID_TRANSLITERATE_HIRAGANA:
case SID_TRANSLITERATE_KATAKANA:
{
OutlinerView* pOLV = GetView()->GetTextEditOutlinerView();
if( pOLV )
{
TransliterationFlags nType = TransliterationFlags::NONE;
switch( nSId )
{
case SID_TRANSLITERATE_SENTENCE_CASE:
nType = TransliterationFlags::SENTENCE_CASE;
break;
case SID_TRANSLITERATE_TITLE_CASE:
nType = TransliterationFlags::TITLE_CASE;
break;
case SID_TRANSLITERATE_TOGGLE_CASE:
nType = TransliterationFlags::TOGGLE_CASE;
break;
case SID_TRANSLITERATE_UPPER:
nType = TransliterationFlags::LOWERCASE_UPPERCASE;
break;
case SID_TRANSLITERATE_LOWER:
nType = TransliterationFlags::UPPERCASE_LOWERCASE;
break;
case SID_TRANSLITERATE_HALFWIDTH:
nType = TransliterationFlags::FULLWIDTH_HALFWIDTH;
break;
case SID_TRANSLITERATE_FULLWIDTH:
nType = TransliterationFlags::HALFWIDTH_FULLWIDTH;
break;
case SID_TRANSLITERATE_HIRAGANA:
nType = TransliterationFlags::KATAKANA_HIRAGANA;
break;
case SID_TRANSLITERATE_KATAKANA:
nType = TransliterationFlags::HIRAGANA_KATAKANA;
break;
}
pOLV->TransliterateText( nType );
}
rReq.Done();
}
break;
// #UndoRedo#
case SID_UNDO :
{
// moved implementation to BaseClass
ImpSidUndo(rReq);
}
break;
case SID_REDO :
{
// moved implementation to BaseClass
ImpSidRedo(rReq);
}
break;
default:
break;
}
}
void DrawViewShell::FuSupportRotate(SfxRequest const &rReq)
{
if( rReq.GetSlot() != SID_TRANSLITERATE_ROTATE_CASE )
return;
::sd::View* pView = GetView();
if (!pView)
return;
OutlinerView* pOLV = pView->GetTextEditOutlinerView();
if (!pOLV)
return;
TransliterationFlags transFlags = m_aRotateCase.getNextMode();
if (TransliterationFlags::SENTENCE_CASE == transFlags)
{
OUString SelectedText = pOLV->GetSelected().trim();
if (SelectedText.getLength() <= 2 || (SelectedText.indexOf(' ') < 0 && SelectedText.indexOf('\t') < 0))
transFlags = m_aRotateCase.getNextMode();
}
pOLV->TransliterateText( transFlags );
}
void DrawViewShell::InsertURLField(const OUString& rURL, const OUString& rText,
const OUString& rTarget, OUString const& rAltText)
{
OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
SvxURLField aURLField(rURL, rText, SvxURLFormat::Repr);
aURLField.SetTargetFrame(rTarget);
aURLField.SetName(rAltText);
if (pOLV)
{
ESelection aSel( pOLV->GetSelection() );
SvxFieldItem const aURLItem(aURLField, EE_FEATURE_FIELD);
pOLV->InsertField( aURLItem );
if (aSel.start.nIndex <= aSel.end.nIndex)
aSel.end.nIndex = aSel.start.nIndex + 1;
else
aSel.start.nIndex = aSel.end.nIndex + 1;
pOLV->SetSelection( aSel );
}
else
{
Outliner* pOutl = GetDoc()->GetInternalOutliner();
pOutl->Init( OutlinerMode::TextObject );
OutlinerMode nOutlMode = pOutl->GetOutlinerMode();
SvxFieldItem aURLItem(aURLField, EE_FEATURE_FIELD);
pOutl->QuickInsertField( aURLItem, ESelection() );
std::optional<OutlinerParaObject> pOutlParaObject = pOutl->CreateParaObject();
rtl::Reference<SdrRectObj> pRectObj = new SdrRectObj(
GetView()->getSdrModelFromSdrView(), ::tools::Rectangle(), SdrObjKind::Text);
pOutl->UpdateFields();
pOutl->SetUpdateLayout( true );
Size aSize(pOutl->CalcTextSize());
pOutl->SetUpdateLayout( false );
Point aPos;
::tools::Rectangle aRect(aPos, GetActiveWindow()->GetOutputSizePixel() );
aPos = aRect.Center();
aPos = GetActiveWindow()->PixelToLogic(aPos);
if (aPos.getX() - (aSize.Width() / 2) >= 0)
aPos.AdjustX( -(aSize.Width() / 2) );
if (aPos.getY() - (aSize.Height() / 2) >= 0)
aPos.AdjustY( -(aSize.Height() / 2) );
::tools::Rectangle aLogicRect(aPos, aSize);
pRectObj->SetLogicRect(aLogicRect);
pRectObj->SetOutlinerParaObject( std::move(pOutlParaObject) );
mpDrawView->InsertObjectAtView(pRectObj.get(), *mpDrawView->GetSdrPageView());
pOutl->Init( nOutlMode );
}
}
void DrawViewShell::InsertURLButton(const OUString& rURL, const OUString& rText,
const OUString& rTarget, const Point* pPos)
{
bool bNewObj = true;
const OUString sTargetURL( ::URIHelper::SmartRel2Abs( INetURLObject( GetDocSh()->GetMedium()->GetBaseURL() ), rURL, URIHelper::GetMaybeFileHdl(), true, false,
INetURLObject::EncodeMechanism::WasEncoded,
INetURLObject::DecodeMechanism::Unambiguous ) );
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
if (rMarkList.GetMarkCount() > 0)
{
SdrObject* pMarkedObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
if( pMarkedObj ) try
{
// change first marked object
if (SdrInventor::FmForm == pMarkedObj->GetObjInventor())
{
SdrUnoObj* pUnoCtrl = static_cast< SdrUnoObj* >( pMarkedObj );
Reference< awt::XControlModel > xControlModel( pUnoCtrl->GetUnoControlModel(), UNO_SET_THROW );
Reference< beans::XPropertySet > xPropSet( xControlModel, UNO_QUERY_THROW );
bool bIsButton = pMarkedObj->GetObjIdentifier() == SdrObjKind::FormButton;
if (!bIsButton && pMarkedObj->GetObjIdentifier() == SdrObjKind::UNO)
{
const Reference<beans::XPropertySetInfo> xInfo(xPropSet->getPropertySetInfo());
bIsButton = xInfo.is() && xInfo->hasPropertyByName(u"ButtonType"_ustr)
&& xInfo->hasPropertyByName(u"Label"_ustr)
&& xInfo->hasPropertyByName(u"TargetURL"_ustr);
}
if (bIsButton)
{
bNewObj = false;
xPropSet->setPropertyValue(u"Label"_ustr, Any(rText));
xPropSet->setPropertyValue(u"TargetURL"_ustr, Any(sTargetURL));
if (!rTarget.isEmpty())
xPropSet->setPropertyValue(u"TargetFrame"_ustr, Any(rTarget));
xPropSet->setPropertyValue(u"ButtonType"_ustr, Any(form::FormButtonType_URL));
#if HAVE_FEATURE_AVMEDIA
if (::avmedia::MediaWindow::isMediaURL(rURL, u""_ustr/*TODO?*/))
{
xPropSet->setPropertyValue(u"DispatchURLInternal"_ustr, Any(true));
}
#endif
}
}
if (bNewObj)
{
// add url as interaction for first selected shape
bNewObj = false;
SdAnimationInfo* pInfo = SdDrawDocument::GetShapeUserData(*pMarkedObj, true);
pInfo->meClickAction = presentation::ClickAction_DOCUMENT;
pInfo->SetBookmark( sTargetURL );
pMarkedObj->setHyperlink(rURL);
}
}
catch( uno::Exception& )
{
}
}
if (!bNewObj)
return;
try
{
rtl::Reference<SdrUnoObj> pUnoCtrl = static_cast< SdrUnoObj* >(
SdrObjFactory::MakeNewObject(
GetView()->getSdrModelFromSdrView(),
SdrInventor::FmForm,
SdrObjKind::FormButton).get()); //,
//mpDrawView->GetSdrPageView()->GetPage()));
Reference< awt::XControlModel > xControlModel( pUnoCtrl->GetUnoControlModel(), uno::UNO_SET_THROW );
Reference< beans::XPropertySet > xPropSet( xControlModel, uno::UNO_QUERY_THROW );
xPropSet->setPropertyValue( u"Label"_ustr , Any( rText ) );
xPropSet->setPropertyValue( u"TargetURL"_ustr , Any( sTargetURL ) );
if( !rTarget.isEmpty() )
xPropSet->setPropertyValue( u"TargetFrame"_ustr , Any( rTarget ) );
xPropSet->setPropertyValue( u"ButtonType"_ustr , Any( form::FormButtonType_URL ) );
#if HAVE_FEATURE_AVMEDIA
if ( ::avmedia::MediaWindow::isMediaURL( rURL, u""_ustr/*TODO?*/ ) )
xPropSet->setPropertyValue( u"DispatchURLInternal"_ustr , Any( true ) );
#endif
Point aPos;
if (pPos)
{
aPos = *pPos;
}
else
{
aPos = ::tools::Rectangle(aPos, GetActiveWindow()->GetOutputSizePixel()).Center();
aPos = GetActiveWindow()->PixelToLogic(aPos);
}
Size aSize(4000, 1000);
aPos.AdjustX( -(aSize.Width() / 2) );
aPos.AdjustY( -(aSize.Height() / 2) );
pUnoCtrl->SetLogicRect(::tools::Rectangle(aPos, aSize));
SdrInsertFlags nOptions = SdrInsertFlags::SETDEFLAYER;
OSL_ASSERT (GetViewShell()!=nullptr);
SfxInPlaceClient* pIpClient = GetViewShell()->GetIPClient();
if (pIpClient!=nullptr && pIpClient->IsObjectInPlaceActive())
{
nOptions |= SdrInsertFlags::DONTMARK;
}
mpDrawView->InsertObjectAtView(pUnoCtrl.get(), *mpDrawView->GetSdrPageView(), nOptions);
}
catch( Exception& )
{
}
}
void DrawViewShell::ShowUIControls (bool bVisible)
{
ViewShell::ShowUIControls (bVisible);
maTabControl->Show (bVisible);
}
namespace slideshowhelp
{
void ShowSlideShow(SfxRequest const & rReq, SdDrawDocument &rDoc)
{
Reference< XPresentation2 > xPresentation( rDoc.getPresentation() );
if( !xPresentation.is() )
return;
sfx2::SfxNotebookBar::LockNotebookBar();
if (SID_REHEARSE_TIMINGS == rReq.GetSlot())
xPresentation->rehearseTimings();
else if (rDoc.getPresentationSettings().mbCustomShow)
{
//fdo#69975 if a custom show has been set, then
//use it whether or not we've been asked to
//start from the current or first slide
xPresentation->start();
// if the custom show not set by default, only show it.
if (rDoc.getPresentationSettings().mbStartCustomShow)
rDoc.getPresentationSettings().mbCustomShow = false;
}
else if (SID_PRESENTATION_CURRENT_SLIDE == rReq.GetSlot())
{
//If there is no custom show set, start will automatically
//start at the current page
xPresentation->start();
}
else
{
//Start at page 0, this would blow away any custom
//show settings if any were set
const SfxUInt16Item* pStartingSlide = rReq.GetArg<SfxUInt16Item>(FN_PARAM_1);
const sal_uInt16 nStartingSlide = pStartingSlide ? pStartingSlide->GetValue() - 1 : 0;
SdPage* pSlide = rDoc.GetSdPage(nStartingSlide, PageKind::Standard);
const OUString aStartingSlide = pSlide ? pSlide->GetName() : OUString();
Sequence< PropertyValue > aArguments{ comphelper::makePropertyValue(u"FirstPage"_ustr,
aStartingSlide) };
xPresentation->startWithArguments( aArguments );
}
sfx2::SfxNotebookBar::UnlockNotebookBar();
}
}
void DrawViewShell::StopSlideShow()
{
Reference< XPresentation2 > xPresentation( GetDoc()->getPresentation() );
if(xPresentation.is() && xPresentation->isRunning())
{
if( mpDrawView->IsTextEdit() )
mpDrawView->SdrEndTextEdit();
xPresentation->end();
}
}
} // end of namespace sd
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V530 The return value of function 'ExecuteList' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.