/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <hintids.hxx>
#include <i18nlangtag/lang.h>
#include <i18nutil/transliteration.hxx>
#include <rtl/ustrbuf.hxx>
#include <svl/slstitm.hxx>
#include <svl/stritem.hxx>
#include <editeng/fontitem.hxx>
#include <editeng/editund2.hxx>
#include <svx/svdview.hxx>
#include <sfx2/viewfrm.hxx>
#include <sfx2/objface.hxx>
#include <svx/svdotext.hxx>
#include <svx/sdooitm.hxx>
#include <editeng/editeng.hxx>
#include <editeng/editview.hxx>
#include <editeng/eeitem.hxx>
#include <editeng/scripttypeitem.hxx>
#include <sfx2/bindings.hxx>
#include <svx/fontwork.hxx>
#include <sfx2/request.hxx>
#include <vcl/EnumContext.hxx>
#include <svl/whiter.hxx>
#include <editeng/outliner.hxx>
#include <editeng/editstat.hxx>
#include <svx/svdoutl.hxx>
#include <com/sun/star/i18n/TextConversionOption.hpp>
#include <com/sun/star/ui/dialogs/XExecutableDialog.hpp>
#include <com/sun/star/lang/XInitialization.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/awt/XWindow.hpp>
#include <com/sun/star/uno/XComponentContext.hpp>
#include <comphelper/propertysequence.hxx>
#include <osl/diagnose.h>
#include <swtypes.hxx>
#include <view.hxx>
#include <wrtsh.hxx>
#include <viewopt.hxx>
#include <drwtxtsh.hxx>
#include <breakit.hxx>
#include <cmdid.h>
#define ShellClass_SwDrawTextShell
#include <sfx2/msg.hxx>
#include <swslots.hxx>
#include <uitool.hxx>
#include <wview.hxx>
#include <swmodule.hxx>
#include <svx/svdoashp.hxx>
#include <svx/svxdlg.hxx>
#include <comphelper/processfactory.hxx>
#include <IDocumentUndoRedo.hxx>
#include <memory>
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::i18n;
SFX_IMPL_INTERFACE(SwDrawTextShell, SfxShell)
void SwDrawTextShell::InitInterface_Impl()
{
GetStaticInterface()->RegisterPopupMenu(u"drawtext"_ustr);
GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Invisible, ToolbarId::Draw_Text_Toolbox_Sw);
GetStaticInterface()->RegisterChildWindow(SvxFontWorkChildWindow::GetChildWindowId());
}
void SwDrawTextShell::Init()
{
SwWrtShell &rSh = GetShell();
m_pSdrView = rSh.GetDrawView();
SdrOutliner * pOutliner = m_pSdrView->GetTextEditOutliner();
//#97471# mouse click _and_ key input at the same time
if( !pOutliner )
return ;
OutlinerView* pOLV = m_pSdrView->GetTextEditOutlinerView();
EEControlBits nCtrl = pOutliner->GetControlWord();
nCtrl |= EEControlBits::AUTOCORRECT;
SetUndoManager(&pOutliner->GetUndoManager());
// Now let's try an AutoSpell.
const SwViewOption* pVOpt = rSh.GetViewOptions();
if(pVOpt->IsOnlineSpell())
{
nCtrl |= EEControlBits::ONLINESPELLING|EEControlBits::ALLOWBIGOBJS;
}
else
nCtrl &= ~EEControlBits::ONLINESPELLING;
pOutliner->SetControlWord(nCtrl);
pOLV->ShowCursor();
}
SwDrawTextShell::SwDrawTextShell(SwView &rV) :
SfxShell(&rV),
m_rView(rV)
{
SwWrtShell &rSh = GetShell();
SetPool(rSh.GetAttrPool().GetSecondaryPool());
// Initialize and show cursor to start editing.
Init();
SetName(u"ObjectText"_ustr);
SfxShell::SetContextName(vcl::EnumContext::GetContextName(vcl::EnumContext::Context::DrawText));
}
SwDrawTextShell::~SwDrawTextShell()
{
if ( GetView().GetCurShell() == this )
m_rView.ResetSubShell();
}
SwWrtShell& SwDrawTextShell::GetShell()
{
return m_rView.GetWrtShell();
}
// Disable slots with this status method
void SwDrawTextShell::StateDisableItems( SfxItemSet &rSet )
{
SfxWhichIter aIter(rSet);
sal_uInt16 nWhich = aIter.FirstWhich();
while (nWhich)
{
rSet.DisableItem( nWhich );
nWhich = aIter.NextWhich();
}
}
void SwDrawTextShell::SetAttrToMarked(const SfxItemSet& rAttr)
{
OutlinerView* pOLV = m_pSdrView->GetTextEditOutlinerView();
tools::Rectangle aOutRect = pOLV->GetOutputArea();
if (tools::Rectangle() != aOutRect)
{
GetShell().GetDrawView()->SetAttributes(rAttr);
}
}
bool SwDrawTextShell::IsTextEdit() const
{
return m_pSdrView->IsTextEdit();
}
void SwDrawTextShell::ExecFontWork(SfxRequest const & rReq)
{
SwWrtShell &rSh = GetShell();
FieldUnit eMetric = ::GetDfltMetric( dynamic_cast<SwWebView*>( &rSh.GetView()) != nullptr );
SW_MOD()->PutItem(SfxUInt16Item(SID_ATTR_METRIC, static_cast< sal_uInt16 >(eMetric)) );
SfxViewFrame& rVFrame = GetView().GetViewFrame();
if ( rReq.GetArgs() )
{
rVFrame.SetChildWindow(SvxFontWorkChildWindow::GetChildWindowId(),
static_cast<const SfxBoolItem&>( (rReq.GetArgs()->
Get(SID_FONTWORK))).GetValue());
}
else
rVFrame.ToggleChildWindow(SvxFontWorkChildWindow::GetChildWindowId());
rVFrame.GetBindings().Invalidate(SID_FONTWORK);
}
void SwDrawTextShell::StateFontWork(SfxItemSet& rSet)
{
const sal_uInt16 nId = SvxFontWorkChildWindow::GetChildWindowId();
rSet.Put(SfxBoolItem(SID_FONTWORK, GetView().GetViewFrame().HasChildWindow(nId)));
}
// Edit SfxRequests for FontWork
void SwDrawTextShell::ExecFormText(SfxRequest const & rReq)
{
SwWrtShell &rSh = GetShell();
SdrView* pDrView = rSh.GetDrawView();
const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();
if ( !(rMarkList.GetMarkCount() == 1 && rReq.GetArgs()) )
return;
const SfxItemSet& rSet = *rReq.GetArgs();
if ( pDrView->IsTextEdit() )
{
//#111733# Sometimes SdrEndTextEdit() initiates the change in selection and
// 'this' is not valid anymore
SwView& rTempView = GetView();
pDrView->SdrEndTextEdit(true);
//this removes the current shell from the dispatcher stack!!
rTempView.AttrChangedNotify(nullptr);
}
pDrView->SetAttributes(rSet);
}
// Return Status values back to FontWork
void SwDrawTextShell::GetFormTextState(SfxItemSet& rSet)
{
SwWrtShell &rSh = GetShell();
SdrView* pDrView = rSh.GetDrawView();
const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();
const SdrObject* pObj = nullptr;
if ( rMarkList.GetMarkCount() == 1 )
pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
const SdrTextObj* pTextObj = DynCastSdrTextObj(pObj);
const bool bDeactivate(
!pObj ||
!pTextObj ||
!pTextObj->HasText() ||
dynamic_cast< const SdrObjCustomShape* >(pObj)); // #121538# no FontWork for CustomShapes
if (bDeactivate)
{
rSet.DisableItem(XATTR_FORMTXTSTYLE);
rSet.DisableItem(XATTR_FORMTXTADJUST);
rSet.DisableItem(XATTR_FORMTXTDISTANCE);
rSet.DisableItem(XATTR_FORMTXTSTART);
rSet.DisableItem(XATTR_FORMTXTMIRROR);
rSet.DisableItem(XATTR_FORMTXTHIDEFORM);
rSet.DisableItem(XATTR_FORMTXTOUTLINE);
rSet.DisableItem(XATTR_FORMTXTSHADOW);
rSet.DisableItem(XATTR_FORMTXTSHDWCOLOR);
rSet.DisableItem(XATTR_FORMTXTSHDWXVAL);
rSet.DisableItem(XATTR_FORMTXTSHDWYVAL);
}
else
{
pDrView->GetAttributes( rSet );
}
}
void SwDrawTextShell::ExecDrawLingu(SfxRequest const &rReq)
{
SwWrtShell &rSh = GetShell();
OutlinerView* pOutlinerView = m_pSdrView->GetTextEditOutlinerView();
if( !rSh.GetDrawView()->GetMarkedObjectList().GetMarkCount() )
return;
switch(rReq.GetSlot())
{
case SID_THESAURUS:
pOutlinerView->StartThesaurus(rReq.GetFrameWeld());
break;
case SID_HANGUL_HANJA_CONVERSION:
pOutlinerView->StartTextConversion(rReq.GetFrameWeld(),
LANGUAGE_KOREAN, LANGUAGE_KOREAN, nullptr,
i18n::TextConversionOption::CHARACTER_BY_CHARACTER, true, false);
break;
case SID_CHINESE_CONVERSION:
{
//open ChineseTranslationDialog
const Reference<XComponentContext>& xContext = comphelper::getProcessComponentContext();
if (!xContext.is())
return;
Reference<lang::XMultiComponentFactory> xMCF(xContext->getServiceManager());
if (!xMCF.is())
return;
Reference<ui::dialogs::XExecutableDialog> xDialog(
xMCF->createInstanceWithContext(u"com.sun.star.linguistic2.ChineseTranslationDialog"_ustr, xContext), UNO_QUERY);
Reference<lang::XInitialization> xInit(xDialog, UNO_QUERY);
if (!xInit.is())
return;
// initialize dialog
uno::Sequence<uno::Any> aSequence(comphelper::InitAnyPropertySequence(
{
{"ParentWindow", uno::Any(Reference<awt::XWindow>())}
}));
xInit->initialize( aSequence );
//execute dialog
sal_Int16 nDialogRet = xDialog->execute();
if(RET_OK == nDialogRet)
{
//get some parameters from the dialog
bool bToSimplified = true;
bool bUseVariants = true;
bool bCommonTerms = true;
Reference<beans::XPropertySet> xPropertySet(xDialog, UNO_QUERY);
if (xPropertySet.is())
{
try
{
xPropertySet->getPropertyValue(u"IsDirectionToSimplified"_ustr) >>= bToSimplified;
xPropertySet->getPropertyValue(u"IsUseCharacterVariants"_ustr) >>= bUseVariants;
xPropertySet->getPropertyValue(u"IsTranslateCommonTerms"_ustr) >>= bCommonTerms;
}
catch (const Exception&)
{
}
}
//execute translation
LanguageType nSourceLang = bToSimplified ? LANGUAGE_CHINESE_TRADITIONAL : LANGUAGE_CHINESE_SIMPLIFIED;
LanguageType nTargetLang = bToSimplified ? LANGUAGE_CHINESE_SIMPLIFIED : LANGUAGE_CHINESE_TRADITIONAL;
sal_Int32 nOptions = bUseVariants ? i18n::TextConversionOption::USE_CHARACTER_VARIANTS : 0;
if(!bCommonTerms)
nOptions = nOptions | i18n::TextConversionOption::CHARACTER_BY_CHARACTER;
vcl::Font aTargetFont = OutputDevice::GetDefaultFont(DefaultFontType::CJK_TEXT, nTargetLang, GetDefaultFontFlags::OnlyOne);
pOutlinerView->StartTextConversion(rReq.GetFrameWeld(), nSourceLang, nTargetLang, &aTargetFont, nOptions, false, false);
}
Reference<lang::XComponent> xComponent(xDialog, UNO_QUERY);
if (xComponent.is())
xComponent->dispose();
}
break;
default:
OSL_ENSURE(false, "unexpected slot-id");
}
}
void SwDrawTextShell::ExecDraw(SfxRequest &rReq)
{
SwWrtShell &rSh = GetShell();
m_pSdrView = rSh.GetDrawView();
OutlinerView* pOLV = m_pSdrView->GetTextEditOutlinerView();
switch (rReq.GetSlot())
{
case FN_INSERT_SOFT_HYPHEN:
case FN_INSERT_HARDHYPHEN:
case FN_INSERT_HARD_SPACE:
case FN_INSERT_NNBSP:
case SID_INSERT_RLM :
case SID_INSERT_LRM :
case SID_INSERT_WJ :
case SID_INSERT_ZWSP:
{
sal_Unicode cIns = 0;
switch(rReq.GetSlot())
{
case FN_INSERT_SOFT_HYPHEN: cIns = CHAR_SOFTHYPHEN; break;
case FN_INSERT_HARDHYPHEN: cIns = CHAR_HARDHYPHEN; break;
case FN_INSERT_HARD_SPACE: cIns = CHAR_HARDBLANK; break;
case FN_INSERT_NNBSP: cIns = CHAR_NNBSP; break;
case SID_INSERT_RLM : cIns = CHAR_RLM ; break;
case SID_INSERT_LRM : cIns = CHAR_LRM ; break;
case SID_INSERT_ZWSP : cIns = CHAR_ZWSP ; break;
case SID_INSERT_WJ: cIns = CHAR_WJ; break;
}
pOLV->InsertText( OUString(cIns));
rReq.Done();
}
break;
case SID_CHARMAP:
{ // Insert special character
InsertSymbol(rReq);
break;
}
case FN_INSERT_STRING:
{
const SfxItemSet *pNewAttrs = rReq.GetArgs();
sal_uInt16 nSlot = rReq.GetSlot();
const SfxPoolItem* pItem = nullptr;
if(pNewAttrs)
{
pNewAttrs->GetItemState(nSlot, false, &pItem );
pOLV->InsertText(static_cast<const SfxStringItem *>(pItem)->GetValue());
}
break;
}
case SID_SELECTALL:
{
SdrOutliner * pOutliner = m_pSdrView->GetTextEditOutliner();
if(pOutliner)
{
sal_Int32 nParaCount = pOutliner->GetParagraphCount();
if (nParaCount > 0)
pOLV->SelectRange(0, nParaCount );
}
}
break;
case FN_FORMAT_RESET: // delete hard text attributes
{
pOLV->RemoveAttribsKeepLanguages( true );
pOLV->GetEditView().getEditEngine().RemoveFields();
rReq.Done();
}
break;
case FN_ESCAPE:
if (m_pSdrView->IsTextEdit())
{
// Shell switch!
rSh.EndTextEdit();
SwView& rTempView = rSh.GetView();
rTempView.ExitDraw();
rSh.Edit();
return;
}
break;
case FN_DRAWTEXT_ATTR_DLG:
{
SfxItemSet aNewAttr(m_pSdrView->GetModel().GetItemPool());
m_pSdrView->GetAttributes( aNewAttr );
SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
VclPtr<SfxAbstractTabDialog> pDlg(pFact->CreateTextTabDialog(
GetView().GetFrameWeld(),
&aNewAttr, m_pSdrView ));
auto xRequest = std::make_shared<SfxRequest>(rReq);
rReq.Ignore(); // the 'old' request is not relevant any more
pDlg->StartExecuteAsync(
[this, pDlg, xRequest=std::move(xRequest)] (sal_Int32 nResult)->void
{
if (nResult == RET_OK)
{
if (m_pSdrView->GetMarkedObjectList().GetMarkCount() != 0)
{
m_pSdrView->SetAttributes(*pDlg->GetOutputItemSet());
xRequest->Done(*(pDlg->GetOutputItemSet()));
}
}
pDlg->disposeOnce();
}
);
}
break;
case SID_TABLE_VERT_NONE:
case SID_TABLE_VERT_CENTER:
case SID_TABLE_VERT_BOTTOM:
{
sal_uInt16 nSId = rReq.GetSlot();
if (m_pSdrView->GetMarkedObjectList().GetMarkCount() != 0)
{
SdrTextVertAdjust eTVA = SDRTEXTVERTADJUST_TOP;
if (nSId == SID_TABLE_VERT_CENTER)
eTVA = SDRTEXTVERTADJUST_CENTER;
else if (nSId == SID_TABLE_VERT_BOTTOM)
eTVA = SDRTEXTVERTADJUST_BOTTOM;
SfxItemSet aNewAttr(m_pSdrView->GetModel().GetItemPool());
m_pSdrView->GetAttributes( aNewAttr );
aNewAttr.Put(SdrTextVertAdjustItem(eTVA));
m_pSdrView->SetAttributes(aNewAttr);
rReq.Done();
}
}
break;
default:
OSL_ENSURE(false, "unexpected slot-id");
return;
}
GetView().GetViewFrame().GetBindings().InvalidateAll(false);
if (IsTextEdit() && pOLV->GetOutliner()->IsModified())
rSh.SetModified();
}
// Execute undo
void SwDrawTextShell::ExecUndo(SfxRequest &rReq)
{
if( !IsTextEdit() )
return;
bool bCallBase = true;
const SfxItemSet* pArgs = rReq.GetArgs();
if( pArgs )
{
sal_uInt16 nId = rReq.GetSlot(), nCnt = 1;
const SfxPoolItem* pItem;
switch( nId )
{
case SID_UNDO:
case SID_REDO:
if( SfxItemState::SET == pArgs->GetItemState( nId, false, &pItem ) &&
1 < (nCnt = static_cast<const SfxUInt16Item*>(pItem)->GetValue()) )
{
// then we make by ourself.
SfxUndoManager* pUndoManager = GetUndoManager();
if( pUndoManager )
{
if( SID_UNDO == nId )
while( nCnt-- )
pUndoManager->Undo();
else
while( nCnt-- )
pUndoManager->Redo();
}
bCallBase = false;
GetView().GetViewFrame().GetBindings().InvalidateAll(false);
}
break;
}
}
if( bCallBase )
{
SfxViewFrame& rSfxViewFrame = GetView().GetViewFrame();
rSfxViewFrame.ExecuteSlot(rReq, rSfxViewFrame.GetInterface());
}
}
// State of undo
void SwDrawTextShell::StateUndo(SfxItemSet &rSet)
{
if ( !IsTextEdit() )
return;
SfxViewFrame& rSfxViewFrame = GetView().GetViewFrame();
SfxWhichIter aIter(rSet);
sal_uInt16 nWhich = aIter.FirstWhich();
while( nWhich )
{
switch ( nWhich )
{
case SID_GETUNDOSTRINGS:
case SID_GETREDOSTRINGS:
{
SfxUndoManager* pUndoManager = GetUndoManager();
if( pUndoManager )
{
OUString (SfxUndoManager::*fnGetComment)( size_t, bool const ) const;
sal_uInt16 nCount;
if( SID_GETUNDOSTRINGS == nWhich )
{
nCount = pUndoManager->GetUndoActionCount();
fnGetComment = &SfxUndoManager::GetUndoActionComment;
}
else
{
nCount = pUndoManager->GetRedoActionCount();
fnGetComment = &SfxUndoManager::GetRedoActionComment;
}
if( nCount )
{
OUStringBuffer sList;
for( sal_uInt16 n = 0; n < nCount; ++n )
sList.append( (pUndoManager->*fnGetComment)( n, SfxUndoManager::TopLevel ) + "\n");
SfxStringListItem aItem( nWhich );
aItem.SetString( sList.makeStringAndClear() );
rSet.Put( aItem );
}
}
else
rSet.DisableItem( nWhich );
}
break;
default:
{
auto* pUndoManager = dynamic_cast<IDocumentUndoRedo*>(GetUndoManager());
if (pUndoManager)
pUndoManager->SetView(&GetView());
rSfxViewFrame.GetSlotState(nWhich, rSfxViewFrame.GetInterface(), &rSet);
if (pUndoManager)
pUndoManager->SetView(nullptr);
}
}
nWhich = aIter.NextWhich();
}
}
void SwDrawTextShell::ExecTransliteration( SfxRequest const & rReq )
{
if (!m_pSdrView)
return;
using namespace i18n;
TransliterationFlags nMode = TransliterationFlags::NONE;
switch( rReq.GetSlot() )
{
case SID_TRANSLITERATE_SENTENCE_CASE:
nMode = TransliterationFlags::SENTENCE_CASE;
break;
case SID_TRANSLITERATE_TITLE_CASE:
nMode = TransliterationFlags::TITLE_CASE;
break;
case SID_TRANSLITERATE_TOGGLE_CASE:
nMode = TransliterationFlags::TOGGLE_CASE;
break;
case SID_TRANSLITERATE_UPPER:
nMode = TransliterationFlags::LOWERCASE_UPPERCASE;
break;
case SID_TRANSLITERATE_LOWER:
nMode = TransliterationFlags::UPPERCASE_LOWERCASE;
break;
case SID_TRANSLITERATE_HALFWIDTH:
nMode = TransliterationFlags::FULLWIDTH_HALFWIDTH;
break;
case SID_TRANSLITERATE_FULLWIDTH:
nMode = TransliterationFlags::HALFWIDTH_FULLWIDTH;
break;
case SID_TRANSLITERATE_HIRAGANA:
nMode = TransliterationFlags::KATAKANA_HIRAGANA;
break;
case SID_TRANSLITERATE_KATAKANA:
nMode = TransliterationFlags::HIRAGANA_KATAKANA;
break;
default:
OSL_ENSURE(false, "wrong dispatcher");
}
if( nMode != TransliterationFlags::NONE )
{
OutlinerView* pOLV = m_pSdrView->GetTextEditOutlinerView();
if (!pOLV)
return;
pOLV->TransliterateText( nMode );
}
}
void SwDrawTextShell::ExecRotateTransliteration( SfxRequest const & rReq )
{
if( rReq.GetSlot() == SID_TRANSLITERATE_ROTATE_CASE )
{
if (!m_pSdrView)
return;
OutlinerView* pOLV = m_pSdrView->GetTextEditOutlinerView();
if (!pOLV)
return;
pOLV->TransliterateText( m_aRotateCase.getNextMode() );
}
}
// Insert special character (see SDraw: FUBULLET.CXX)
void SwDrawTextShell::InsertSymbol(SfxRequest& rReq)
{
OutlinerView* pOLV = m_pSdrView->GetTextEditOutlinerView();
if(!pOLV)
return;
const SfxItemSet *pArgs = rReq.GetArgs();
const SfxStringItem* pItem = nullptr;
if( pArgs )
pItem = pArgs->GetItemIfSet(SID_CHARMAP, false);
OUString sSym;
OUString sFontName;
if ( pItem )
{
sSym = pItem->GetValue();
const SfxStringItem* pFontItem = pArgs->GetItemIfSet( SID_ATTR_SPECIALCHAR, false);
if ( pFontItem )
sFontName = pFontItem->GetValue();
}
SfxItemSet aSet(pOLV->GetAttribs());
SvtScriptType nScript = pOLV->GetSelectedScriptType();
std::shared_ptr<SvxFontItem> aSetDlgFont(std::make_shared<SvxFontItem>(RES_CHRATR_FONT));
{
SvxScriptSetItem aSetItem( SID_ATTR_CHAR_FONT, *aSet.GetPool() );
aSetItem.GetItemSet().Put( aSet, false );
const SfxPoolItem* pI = aSetItem.GetItemOfScript( nScript );
if( pI )
aSetDlgFont.reset(static_cast<SvxFontItem*>(pI->Clone()));
else
{
TypedWhichId<SvxFontItem> nFontWhich =
GetWhichOfScript(
SID_ATTR_CHAR_FONT,
SvtLanguageOptions::GetI18NScriptTypeOfLanguage( GetAppLanguage() ) );
aSetDlgFont.reset(aSet.Get( nFontWhich ).Clone());
}
if (sFontName.isEmpty())
sFontName = aSetDlgFont->GetFamilyName();
}
vcl::Font aFont(sFontName, Size(1,1));
if(sSym.isEmpty())
{
SfxAllItemSet aAllSet( GetPool() );
aAllSet.Put( SfxBoolItem( FN_PARAM_1, false ) );
SwViewOption aOpt(*m_rView.GetWrtShell().GetViewOptions());
const OUString& sSymbolFont = aOpt.GetSymbolFont();
if( !sSymbolFont.isEmpty() )
aAllSet.Put( SfxStringItem( SID_FONT_NAME, sSymbolFont ) );
else
aAllSet.Put( SfxStringItem( SID_FONT_NAME, aSetDlgFont->GetFamilyName() ) );
// If character is selected, it can be shown
SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
auto xFrame = m_rView.GetViewFrame().GetFrame().GetFrameInterface();
VclPtr<SfxAbstractDialog> pDlg(pFact->CreateCharMapDialog(m_rView.GetFrameWeld(), aAllSet, xFrame));
pDlg->StartExecuteAsync(
[pDlg] (sal_Int32 /*nResult*/)->void
{
pDlg->disposeOnce();
}
);
return;
}
// do not flicker
pOLV->HideCursor();
SdrOutliner * pOutliner = m_pSdrView->GetTextEditOutliner();
pOutliner->SetUpdateLayout(false);
SfxItemSet aOldSet( pOLV->GetAttribs() );
SfxItemSetFixed<
EE_CHAR_FONTINFO, EE_CHAR_FONTINFO,
EE_CHAR_FONTINFO_CJK, EE_CHAR_FONTINFO_CTL> aFontSet( *aOldSet.GetPool() );
aFontSet.Set( aOldSet );
// Insert string
pOLV->InsertText( sSym );
// assign attributes (Set font)
SfxItemSet aFontAttribSet( *aFontSet.GetPool(), aFontSet.GetRanges() );
SvxFontItem aFontItem (aFont.GetFamilyType(), aFont.GetFamilyName(),
aFont.GetStyleName(), aFont.GetPitch(),
aFont.GetCharSet(),
EE_CHAR_FONTINFO );
nScript = g_pBreakIt->GetAllScriptsOfText( sSym );
if( SvtScriptType::LATIN & nScript )
aFontAttribSet.Put( aFontItem );
if( SvtScriptType::ASIAN & nScript )
{
aFontItem.SetWhich(EE_CHAR_FONTINFO_CJK);
aFontAttribSet.Put( aFontItem );
}
if( SvtScriptType::COMPLEX & nScript )
{
aFontItem.SetWhich(EE_CHAR_FONTINFO_CTL);
aFontAttribSet.Put( aFontItem );
}
pOLV->SetAttribs(aFontAttribSet);
// Remove selection
ESelection aSel(pOLV->GetSelection());
aSel.nStartPara = aSel.nEndPara;
aSel.nStartPos = aSel.nEndPos;
pOLV->SetSelection(aSel);
// Restore old font
pOLV->SetAttribs( aFontSet );
// From now on show again
pOutliner->SetUpdateLayout(true);
pOLV->ShowCursor();
rReq.AppendItem( SfxStringItem( SID_CHARMAP, sSym ) );
if(!aFont.GetFamilyName().isEmpty())
rReq.AppendItem( SfxStringItem( SID_ATTR_SPECIALCHAR, aFont.GetFamilyName() ) );
rReq.Done();
}
SfxUndoManager* SwDrawTextShell::GetUndoManager()
{
SwWrtShell &rSh = GetShell();
m_pSdrView = rSh.GetDrawView();
SdrOutliner * pOutliner = m_pSdrView->GetTextEditOutliner();
return &pOutliner->GetUndoManager();
}
void SwDrawTextShell::GetStatePropPanelAttr(SfxItemSet &rSet)
{
SfxWhichIter aIter( rSet );
sal_uInt16 nWhich = aIter.FirstWhich();
SwWrtShell &rSh = GetShell();
m_pSdrView = rSh.GetDrawView();
SfxItemSet aAttrs(m_pSdrView->GetModel().GetItemPool());
m_pSdrView->GetAttributes( aAttrs );
while ( nWhich )
{
sal_uInt16 nSlotId = SfxItemPool::IsWhich(nWhich)
? GetPool().GetSlotId(nWhich)
: nWhich;
switch ( nSlotId )
{
case SID_TABLE_VERT_NONE:
case SID_TABLE_VERT_CENTER:
case SID_TABLE_VERT_BOTTOM:
bool bContour = false;
SfxItemState eConState = aAttrs.GetItemState( SDRATTR_TEXT_CONTOURFRAME );
if( eConState != SfxItemState::INVALID )
{
bContour = aAttrs.Get( SDRATTR_TEXT_CONTOURFRAME ).GetValue();
}
if (bContour) break;
SfxItemState eVState = aAttrs.GetItemState( SDRATTR_TEXT_VERTADJUST );
//SfxItemState eHState = aAttrs.GetItemState( SDRATTR_TEXT_HORZADJUST );
//if(SfxItemState::INVALID != eVState && SfxItemState::INVALID != eHState)
if(SfxItemState::INVALID != eVState)
{
SdrTextVertAdjust eTVA = aAttrs.Get(SDRATTR_TEXT_VERTADJUST).GetValue();
bool bSet = (nSlotId == SID_TABLE_VERT_NONE && eTVA == SDRTEXTVERTADJUST_TOP) ||
(nSlotId == SID_TABLE_VERT_CENTER && eTVA == SDRTEXTVERTADJUST_CENTER) ||
(nSlotId == SID_TABLE_VERT_BOTTOM && eTVA == SDRTEXTVERTADJUST_BOTTOM);
rSet.Put(SfxBoolItem(nSlotId, bSet));
}
else
{
rSet.Put(SfxBoolItem(nSlotId, false));
}
break;
}
nWhich = aIter.NextWhich();
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'ExecuteSlot' is required to be utilized.
↑ V530 The return value of function 'GetSlotState' is required to be utilized.
↑ V547 Expression 'bToSimplified' is always true.
↑ V547 Expression 'bToSimplified' is always true.
↑ V547 Expression 'bUseVariants' is always true.
↑ V547 Expression '!bCommonTerms' is always false.