/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <config_wasm_strip.h>
#include <hintids.hxx>
#include <svtools/optionsdrawinglayer.hxx>
#include <officecfg/Office/Common.hxx>
#include <svx/svdpage.hxx>
#include <svx/svdpagv.hxx>
#include <svx/fmmodel.hxx>
#include <sot/exchange.hxx>
#include <svx/sdrundomanager.hxx>
#include <tools/globname.hxx>
#include <editeng/outliner.hxx>
#include <osl/diagnose.h>
#include <com/sun/star/embed/EmbedMisc.hpp>
#include <com/sun/star/embed/XEmbeddedObject.hpp>
#include <unotools/configmgr.hxx>
#include <pagefrm.hxx>
#include <rootfrm.hxx>
#include <cntfrm.hxx>
#include <notxtfrm.hxx>
#include <flyfrm.hxx>
#include <frmfmt.hxx>
#include <dflyobj.hxx>
#include <dcontact.hxx>
#include <textboxhelper.hxx>
#include <viewsh.hxx>
#include <viewimp.hxx>
#include <dview.hxx>
#include <doc.hxx>
#include <mdiexp.hxx>
#include <ndole.hxx>
#include <ndgrf.hxx>
#include <fmtanchr.hxx>
#include <IDocumentUndoRedo.hxx>
#include <DocumentSettingManager.hxx>
#include <IDocumentLayoutAccess.hxx>
#include <com/sun/star/embed/Aspects.hpp>
#include <vector>
#include <sortedobjs.hxx>
using namespace com::sun::star;
namespace {
class SwSdrHdl : public SdrHdl
{
public:
SwSdrHdl(const Point& rPnt, bool bTopRight ) :
SdrHdl( rPnt, bTopRight ? SdrHdlKind::Anchor_TR : SdrHdlKind::Anchor ) {}
virtual bool IsFocusHdl() const override;
};
}
bool SwSdrHdl::IsFocusHdl() const
{
if( SdrHdlKind::Anchor == m_eKind || SdrHdlKind::Anchor_TR == m_eKind )
return true;
return SdrHdl::IsFocusHdl();
}
static const SwFrame *lcl_FindAnchor( const SdrObject *pObj, bool bAll )
{
const SwVirtFlyDrawObj *pVirt = dynamic_cast< const SwVirtFlyDrawObj *>( pObj );
if ( pVirt )
{
if ( bAll || !pVirt->GetFlyFrame()->IsFlyInContentFrame() )
return pVirt->GetFlyFrame()->GetAnchorFrame();
}
else
{
const SwDrawContact *pCont = static_cast<const SwDrawContact*>(GetUserCall(pObj));
if ( pCont )
return pCont->GetAnchorFrame( pObj );
}
return nullptr;
}
SwDrawView::SwDrawView(
SwViewShellImp& rI,
FmFormModel& rFmFormModel,
OutputDevice* pOutDev)
: FmFormView(rFmFormModel, pOutDev),
m_rImp( rI )
{
SetPageVisible( false );
SetBordVisible( false );
SetGridVisible( false );
SetHlplVisible( false );
SetGlueVisible( false );
SetFrameDragSingles();
SetSwapAsynchron();
EnableExtendedKeyInputDispatcher( false );
EnableExtendedMouseEventDispatcher( false );
SetHitTolerancePixel( GetMarkHdlSizePixel()/2 );
SetPrintPreview( rI.GetShell()->IsPreview() );
// #i73602# Use default from the configuration
SetBufferedOverlayAllowed(!comphelper::IsFuzzing() && officecfg::Office::Common::Drawinglayer::OverlayBuffer_Writer::get());
// #i74769#, #i75172# Use default from the configuration
SetBufferedOutputAllowed(!comphelper::IsFuzzing() && officecfg::Office::Common::Drawinglayer::OverlayBuffer_DrawImpress::get());
}
// #i99665#
bool SwDrawView::IsAntiAliasing()
{
return SvtOptionsDrawinglayer::IsAntiAliasing();
}
static SdrObject* impLocalHitCorrection(SdrObject* pRetval, const Point& rPnt, sal_uInt16 nTol, const SdrMarkList &rMrkList)
{
if(!nTol)
{
// the old method forced back to outer bounds test when nTol == 0, so
// do not try to correct when nTol is not set (used from HelpContent)
}
else
{
// rebuild logic from former SwVirtFlyDrawObj::CheckSdrObjectHit. This is needed since
// the SdrObject-specific CheckHit implementations are now replaced with primitives and
// 'tricks' like in the old implementation (e.g. using a view from a model-data class to
// detect if object is selected) are no longer valid.
// The standard primitive hit-test for SwVirtFlyDrawObj now is the outer bound. The old
// implementation reduced this excluding the inner bound when the object was not selected.
SwVirtFlyDrawObj* pSwVirtFlyDrawObj = dynamic_cast< SwVirtFlyDrawObj* >(pRetval);
if(pSwVirtFlyDrawObj)
{
if(pSwVirtFlyDrawObj->GetFlyFrame()->Lower() && pSwVirtFlyDrawObj->GetFlyFrame()->Lower()->IsNoTextFrame())
{
// the old method used IsNoTextFrame (should be for SW's own OLE and
// graphic's) to accept hit only based on outer bounds; nothing to do
}
else
{
// check if the object is selected in this view
const size_t nMarkCount(rMrkList.GetMarkCount());
bool bSelected(false);
for(size_t a = 0; !bSelected && a < nMarkCount; ++a)
{
if(pSwVirtFlyDrawObj == rMrkList.GetMark(a)->GetMarkedSdrObj())
{
bSelected = true;
}
}
if(!bSelected)
{
// when not selected, the object is not hit when hit position is inside
// inner range. Get and shrink inner range
basegfx::B2DRange aInnerBound(pSwVirtFlyDrawObj->getInnerBound());
aInnerBound.grow(-1.0 * nTol);
if(aInnerBound.isInside(basegfx::B2DPoint(rPnt.X(), rPnt.Y())))
{
// exclude this hit
pRetval = nullptr;
}
}
}
}
}
return pRetval;
}
SdrObject* SwDrawView::CheckSingleSdrObjectHit(const Point& rPnt, sal_uInt16 nTol, SdrObject* pObj, SdrPageView* pPV, SdrSearchOptions nOptions, const SdrLayerIDSet* pMVisLay) const
{
// call parent
SdrObject* pRetval = FmFormView::CheckSingleSdrObjectHit(rPnt, nTol, pObj, pPV, nOptions, pMVisLay);
if(pRetval)
{
// override to allow extra handling when picking SwVirtFlyDrawObj's
pRetval = impLocalHitCorrection(pRetval, rPnt, nTol, GetMarkedObjectList());
}
return pRetval;
}
/// Gets called every time the handles need to be build
void SwDrawView::AddCustomHdl()
{
const SdrMarkList &rMrkList = GetMarkedObjectList();
if(rMrkList.GetMarkCount() != 1)
return;
SdrObject *pObj = rMrkList.GetMark(0)->GetMarkedSdrObj();
SwContact* pContact = ::GetUserCall( pObj );
if (!pContact)
return;
// make code robust
SwFrameFormat* pFrameFormat( ::FindFrameFormat( pObj ) );
if ( !pFrameFormat )
{
OSL_FAIL( "<SwDrawView::AddCustomHdl()> - missing frame format!" );
return;
}
const SwFormatAnchor &rAnchor = pFrameFormat->GetAnchor();
if (RndStdIds::FLY_AS_CHAR == rAnchor.GetAnchorId())
return;
const SwFrame* pAnch = CalcAnchor();
if(nullptr == pAnch)
return;
Point aPos(m_aAnchorPoint);
if ( RndStdIds::FLY_AT_CHAR == rAnchor.GetAnchorId() )
{
// #i28701# - use last character rectangle saved at object
// in order to avoid a format of the anchor frame
SwAnchoredObject* pAnchoredObj = pContact->GetAnchoredObj( pObj );
// Invalidate/recalc LastCharRect which can contain invalid frame offset because
// of later frame changes
pAnchoredObj->CheckCharRectAndTopOfLine(false);
SwRect aAutoPos = pAnchoredObj->GetLastCharRect();
if ( aAutoPos.Height() )
{
aPos = aAutoPos.Pos();
}
}
// add anchor handle:
std::unique_ptr<SdrHdl> hdl = std::make_unique<SwSdrHdl>( aPos, ( pAnch->IsVertical() && !pAnch->IsVertLR() ) ||
pAnch->IsRightToLeft() );
hdl->SetObjHdlNum(maHdlList.GetHdlCount());
maHdlList.AddHdl(std::move(hdl));
}
SdrObject* SwDrawView::GetMaxToTopObj( SdrObject* pObj ) const
{
if ( GetUserCall(pObj) )
{
const SwFrame *pAnch = ::lcl_FindAnchor( pObj, false );
if ( pAnch )
{
//The topmost Obj within the anchor must not be overtaken.
const SwFlyFrame *pFly = pAnch->FindFlyFrame();
if ( pFly )
{
const SwPageFrame *pPage = pFly->FindPageFrame();
if ( pPage->GetSortedObjs() )
{
size_t nOrdNum = 0;
for (SwAnchoredObject* i : *pPage->GetSortedObjs())
{
const SdrObject *pO = i->GetDrawObj();
if ( pO->GetOrdNumDirect() > nOrdNum )
{
const SwFrame *pTmpAnch = ::lcl_FindAnchor( pO, false );
if ( pFly->IsAnLower( pTmpAnch ) )
{
nOrdNum = pO->GetOrdNumDirect();
}
}
}
if ( nOrdNum )
{
SdrPage *pTmpPage = GetModel().GetPage( 0 );
++nOrdNum;
if ( nOrdNum < pTmpPage->GetObjCount() )
{
return pTmpPage->GetObj( nOrdNum );
}
}
}
}
}
}
return nullptr;
}
SdrObject* SwDrawView::GetMaxToBtmObj(SdrObject* pObj) const
{
if ( GetUserCall(pObj) )
{
const SwFrame *pAnch = ::lcl_FindAnchor( pObj, false );
if ( pAnch )
{
//The Fly of the anchor must not be "flying under".
const SwFlyFrame *pFly = pAnch->FindFlyFrame();
if ( pFly )
{
SdrObject *pRet = const_cast<SdrObject*>(static_cast<SdrObject const *>(pFly->GetVirtDrawObj()));
return pRet != pObj ? pRet : nullptr;
}
}
}
return nullptr;
}
/// determine maximal order number for a 'child' object of given 'parent' object
sal_uInt32 SwDrawView::GetMaxChildOrdNum( const SwFlyFrame& _rParentObj,
const SdrObject* _pExclChildObj )
{
sal_uInt32 nMaxChildOrdNum = _rParentObj.GetDrawObj()->GetOrdNum();
const SdrPage* pDrawPage = _rParentObj.GetDrawObj()->getSdrPageFromSdrObject();
assert(pDrawPage && "<SwDrawView::GetMaxChildOrdNum(..) - missing drawing page at parent object - crash!");
const size_t nObjCount = pDrawPage->GetObjCount();
for ( size_t i = nObjCount-1; i > _rParentObj.GetDrawObj()->GetOrdNum() ; --i )
{
const SdrObject* pObj = pDrawPage->GetObj( i );
// Don't consider 'child' object <_pExclChildObj>
if ( pObj == _pExclChildObj )
{
continue;
}
if ( pObj->GetOrdNum() > nMaxChildOrdNum &&
_rParentObj.IsAnLower( lcl_FindAnchor( pObj, true ) ) )
{
nMaxChildOrdNum = pObj->GetOrdNum();
break;
}
}
return nMaxChildOrdNum;
}
/// method to move 'repeated' objects of the given moved object to the according level
void SwDrawView::MoveRepeatedObjs( const SwAnchoredObject& _rMovedAnchoredObj,
const std::vector<SdrObject*>& _rMovedChildObjs ) const
{
// determine 'repeated' objects of already moved object <_rMovedAnchoredObj>
std::vector<SwAnchoredObject*> aAnchoredObjs;
{
const SwContact* pContact = ::GetUserCall( _rMovedAnchoredObj.GetDrawObj() );
assert(pContact && "SwDrawView::MoveRepeatedObjs(..) - missing contact object -> crash.");
if (pContact)
pContact->GetAnchoredObjs( aAnchoredObjs );
}
// check, if 'repeated' objects exists.
if ( aAnchoredObjs.size() <= 1 )
return;
SdrPage* pDrawPage = GetModel().GetPage( 0 );
// move 'repeated' ones to the same order number as the already moved one.
const size_t nNewPos = _rMovedAnchoredObj.GetDrawObj()->GetOrdNum();
while ( !aAnchoredObjs.empty() )
{
SwAnchoredObject* pAnchoredObj = aAnchoredObjs.back();
if ( pAnchoredObj != &_rMovedAnchoredObj )
{
pDrawPage->SetObjectOrdNum( pAnchoredObj->GetDrawObj()->GetOrdNum(),
nNewPos );
pDrawPage->RecalcObjOrdNums();
// adjustments for accessibility API
#if !ENABLE_WASM_STRIP_ACCESSIBILITY
if ( auto pTmpFlyFrame = pAnchoredObj->DynCastFlyFrame() )
{
m_rImp.DisposeAccessibleFrame( pTmpFlyFrame );
m_rImp.AddAccessibleFrame( pTmpFlyFrame );
}
else
{
m_rImp.DisposeAccessibleObj(pAnchoredObj->GetDrawObj(), true);
m_rImp.AddAccessibleObj( pAnchoredObj->GetDrawObj() );
}
#endif
}
aAnchoredObjs.pop_back();
}
// move 'repeated' ones of 'child' objects
for ( SdrObject* pChildObj : _rMovedChildObjs )
{
{
const SwContact* pContact = ::GetUserCall( pChildObj );
assert(pContact && "SwDrawView::MoveRepeatedObjs(..) - missing contact object -> crash.");
if (pContact)
pContact->GetAnchoredObjs( aAnchoredObjs );
}
// move 'repeated' ones to the same order number as the already moved one.
const size_t nTmpNewPos = pChildObj->GetOrdNum();
while ( !aAnchoredObjs.empty() )
{
SwAnchoredObject* pAnchoredObj = aAnchoredObjs.back();
if ( pAnchoredObj->GetDrawObj() != pChildObj )
{
pDrawPage->SetObjectOrdNum( pAnchoredObj->GetDrawObj()->GetOrdNum(),
nTmpNewPos );
pDrawPage->RecalcObjOrdNums();
// adjustments for accessibility API
#if !ENABLE_WASM_STRIP_ACCESSIBILITY
if ( auto pTmpFlyFrame = pAnchoredObj->DynCastFlyFrame() )
{
m_rImp.DisposeAccessibleFrame( pTmpFlyFrame );
m_rImp.AddAccessibleFrame( pTmpFlyFrame );
}
else
{
m_rImp.DisposeAccessibleObj(pAnchoredObj->GetDrawObj(), true);
m_rImp.AddAccessibleObj( pAnchoredObj->GetDrawObj() );
}
#endif
}
aAnchoredObjs.pop_back();
}
}
}
// --> adjustment and re-factoring of method
void SwDrawView::ObjOrderChanged( SdrObject* pObj, size_t nOldPos,
size_t nNewPos )
{
// nothing to do for group members
if ( pObj->getParentSdrObjectFromSdrObject() )
{
return;
}
// determine drawing page and assure that the order numbers are correct.
SdrPage* pDrawPage = GetModel().GetPage( 0 );
if ( pDrawPage->IsObjOrdNumsDirty() )
pDrawPage->RecalcObjOrdNums();
const size_t nObjCount = pDrawPage->GetObjCount();
SwContact* pContact = ::GetUserCall( pObj );
if (!pContact)
return;
SwAnchoredObject* pMovedAnchoredObj = pContact->GetAnchoredObj( pObj );
const SwFlyFrame* pParentAnchoredObj =
pMovedAnchoredObj->GetAnchorFrame()->FindFlyFrame();
const bool bMovedForward = nOldPos < nNewPos;
// assure for a 'child' object, that it doesn't exceed the limits of its 'parent'
if ( pParentAnchoredObj )
{
if ( bMovedForward )
{
const size_t nMaxChildOrdNumWithoutMoved =
GetMaxChildOrdNum( *pParentAnchoredObj, pMovedAnchoredObj->GetDrawObj() );
if ( nNewPos > nMaxChildOrdNumWithoutMoved+1 )
{
// set position to the top of the 'child' object group
pDrawPage->SetObjectOrdNum( nNewPos, nMaxChildOrdNumWithoutMoved+1 );
nNewPos = nMaxChildOrdNumWithoutMoved+1;
}
}
else
{
const size_t nParentOrdNum = pParentAnchoredObj->GetDrawObj()->GetOrdNum();
if ( nNewPos < nParentOrdNum )
{
// set position to the bottom of the 'child' object group
pDrawPage->SetObjectOrdNum( nNewPos, nParentOrdNum );
nNewPos = nParentOrdNum;
}
}
if ( pDrawPage->IsObjOrdNumsDirty() )
pDrawPage->RecalcObjOrdNums();
}
// Assure, that object isn't positioned between 'repeated' ones
if ( ( bMovedForward && nNewPos < nObjCount - 1 ) ||
( !bMovedForward && nNewPos > 0 ) )
{
const SdrObject* pTmpObj =
pDrawPage->GetObj( bMovedForward ? nNewPos - 1 : nNewPos + 1 );
if ( pTmpObj )
{
size_t nTmpNewPos( nNewPos );
if (const SwContact* pContact2 = ::GetUserCall( pTmpObj ))
{
if ( bMovedForward )
{
// move before the top 'repeated' object
const sal_uInt32 nTmpMaxOrdNum = pContact2->GetMaxOrdNum();
if ( nTmpMaxOrdNum > nNewPos )
nTmpNewPos = nTmpMaxOrdNum;
}
else
{
// move behind the bottom 'repeated' object
const sal_uInt32 nTmpMinOrdNum = pContact2->GetMinOrdNum();
if ( nTmpMinOrdNum < nNewPos )
nTmpNewPos = nTmpMinOrdNum;
}
}
if ( nTmpNewPos != nNewPos )
{
pDrawPage->SetObjectOrdNum( nNewPos, nTmpNewPos );
nNewPos = nTmpNewPos;
pDrawPage->RecalcObjOrdNums();
}
}
}
// On move forward, assure that object is moved before its own children.
// Only Writer fly frames can have children.
if ( pMovedAnchoredObj->DynCastFlyFrame() &&
bMovedForward && nNewPos < nObjCount - 1 )
{
sal_uInt32 nMaxChildOrdNum =
GetMaxChildOrdNum( *static_cast<const SwFlyFrame*>(pMovedAnchoredObj) );
if ( nNewPos < nMaxChildOrdNum )
{
// determine position before the object before its top 'child' object
const SdrObject* pTmpObj = pDrawPage->GetObj( nMaxChildOrdNum );
if (SwContact* pContact2 = ::GetUserCall( pTmpObj ))
{
size_t nTmpNewPos = pContact2->GetMaxOrdNum() + 1;
if ( nTmpNewPos >= nObjCount )
{
--nTmpNewPos;
}
// assure, that determined position isn't between 'repeated' objects
pTmpObj = pDrawPage->GetObj( nTmpNewPos );
pContact2 = ::GetUserCall( pTmpObj );
if (pContact2)
{
nTmpNewPos = pContact2->GetMaxOrdNum();
// apply new position
pDrawPage->SetObjectOrdNum( nNewPos, nTmpNewPos );
nNewPos = nTmpNewPos;
pDrawPage->RecalcObjOrdNums();
}
}
}
}
// Assure, that object isn't positioned between nested objects
if ( ( bMovedForward && nNewPos < nObjCount - 1 ) ||
( !bMovedForward && nNewPos > 0 ) )
{
size_t nTmpNewPos( nNewPos );
const SwFrameFormat* pParentFrameFormat =
pParentAnchoredObj ? pParentAnchoredObj->GetFrameFormat() : nullptr;
const SdrObject* pTmpObj = pDrawPage->GetObj( nNewPos + 1 );
while ( pTmpObj )
{
// #i38563# - assure, that anchor frame exists.
// If object is anchored inside an invisible part of the document
// (e.g. page header, whose page style isn't applied, or hidden
// section), no anchor frame exists.
const SwFrame* pTmpAnchorFrame = lcl_FindAnchor( pTmpObj, true );
const SwFlyFrame* pTmpParentObj = pTmpAnchorFrame
? pTmpAnchorFrame->FindFlyFrame() : nullptr;
if ( pTmpParentObj &&
pTmpParentObj->GetFrameFormat() != pParentFrameFormat )
{
if (const SwContact* pContact2 = ::GetUserCall( pTmpObj ))
{
if ( bMovedForward )
{
nTmpNewPos = pContact2->GetMaxOrdNum();
pTmpObj = pDrawPage->GetObj( nTmpNewPos + 1 );
}
else
{
nTmpNewPos = pContact2->GetMinOrdNum();
pTmpObj = pTmpParentObj->GetDrawObj();
}
}
}
else
break;
}
if ( nTmpNewPos != nNewPos )
{
pDrawPage->SetObjectOrdNum( nNewPos, nTmpNewPos );
nNewPos = nTmpNewPos;
pDrawPage->RecalcObjOrdNums();
}
}
// setup collection of moved 'child' objects to move its 'repeated' objects.
std::vector< SdrObject* > aMovedChildObjs;
// move 'children' accordingly
if ( auto pFlyFrame = pMovedAnchoredObj->DynCastFlyFrame() )
{
// adjustments for accessibility API
#if !ENABLE_WASM_STRIP_ACCESSIBILITY
m_rImp.DisposeAccessibleFrame( pFlyFrame );
m_rImp.AddAccessibleFrame( pFlyFrame );
#endif
const sal_uInt32 nChildNewPos = bMovedForward ? nNewPos : nNewPos+1;
size_t i = bMovedForward ? nOldPos : nObjCount-1;
do
{
SdrObject* pTmpObj = pDrawPage->GetObj( i );
if ( pTmpObj == pObj )
break;
// #i38563# - assure, that anchor frame exists.
// If object is anchored inside an invisible part of the document
// (e.g. page header, whose page style isn't applied, or hidden
// section), no anchor frame exists.
const SwFrame* pTmpAnchorFrame = lcl_FindAnchor( pTmpObj, true );
const SwFlyFrame* pTmpParentObj = pTmpAnchorFrame
? pTmpAnchorFrame->FindFlyFrame() : nullptr;
if ( pTmpParentObj &&
( ( pTmpParentObj == pFlyFrame ) ||
( pFlyFrame->IsUpperOf( *pTmpParentObj ) ) ) )
{
// move child object.,
pDrawPage->SetObjectOrdNum( i, nChildNewPos );
pDrawPage->RecalcObjOrdNums();
// collect 'child' object
aMovedChildObjs.push_back( pTmpObj );
// adjustments for accessibility API
#if !ENABLE_WASM_STRIP_ACCESSIBILITY
if ( auto pFlyDrawObj = dynamic_cast<SwVirtFlyDrawObj *>( pTmpObj ) )
{
const SwFlyFrame *pTmpFlyFrame = pFlyDrawObj->GetFlyFrame();
m_rImp.DisposeAccessibleFrame( pTmpFlyFrame );
m_rImp.AddAccessibleFrame( pTmpFlyFrame );
}
else
{
m_rImp.DisposeAccessibleObj(pTmpObj, true);
m_rImp.AddAccessibleObj( pTmpObj );
}
#endif
}
else
{
// adjust loop counter
if ( bMovedForward )
++i;
else if (i > 0)
--i;
}
} while ( ( bMovedForward && i < ( nObjCount - aMovedChildObjs.size() ) ) ||
( !bMovedForward && i > ( nNewPos + aMovedChildObjs.size() ) ) );
}
#if !ENABLE_WASM_STRIP_ACCESSIBILITY
else
{
// adjustments for accessibility API
m_rImp.DisposeAccessibleObj(pObj, true);
m_rImp.AddAccessibleObj( pObj );
}
#endif
MoveRepeatedObjs( *pMovedAnchoredObj, aMovedChildObjs );
}
bool SwDrawView::TakeDragLimit( SdrDragMode eMode,
tools::Rectangle& rRect ) const
{
const SdrMarkList &rMrkList = GetMarkedObjectList();
bool bRet = false;
if( 1 == rMrkList.GetMarkCount() )
{
const SdrObject *pObj = rMrkList.GetMark( 0 )->GetMarkedSdrObj();
SwRect aRect;
if( ::CalcClipRect( pObj, aRect, eMode == SdrDragMode::Move ) )
{
rRect = aRect.SVRect();
bRet = true;
}
}
return bRet;
}
const SwFrame* SwDrawView::CalcAnchor()
{
const SdrMarkList &rMrkList = GetMarkedObjectList();
if ( rMrkList.GetMarkCount() != 1 )
return nullptr;
SdrObject* pObj = rMrkList.GetMark( 0 )->GetMarkedSdrObj();
//Search for paragraph bound objects, otherwise only the
//current anchor. Search only if we currently drag.
const SwFrame* pAnch = nullptr;
tools::Rectangle aMyRect;
auto pFlyDrawObj = dynamic_cast<SwVirtFlyDrawObj *>( pObj );
if ( pFlyDrawObj )
{
pAnch = pFlyDrawObj->GetFlyFrame()->GetAnchorFrame();
aMyRect = pFlyDrawObj->GetFlyFrame()->getFrameArea().SVRect();
}
else
{
// determine correct anchor position for 'virtual' drawing objects.
// #i26791#
if (SwDrawContact* pContact = static_cast<SwDrawContact*>(GetUserCall(pObj)))
{
pAnch = pContact->GetAnchorFrame( pObj );
if( !pAnch )
{
pContact->ConnectToLayout();
// determine correct anchor position for 'virtual' drawing objects.
// #i26791#
pAnch = pContact->GetAnchorFrame( pObj );
}
}
aMyRect = pObj->GetSnapRect();
}
const bool bTopRight = pAnch && ( ( pAnch->IsVertical() &&
!pAnch->IsVertLR() ) ||
pAnch->IsRightToLeft() );
const Point aMyPt = bTopRight ? aMyRect.TopRight() : aMyRect.TopLeft();
Point aPt;
if ( IsAction() )
{
if ( !TakeDragObjAnchorPos( aPt, bTopRight ) )
return nullptr;
}
else
{
tools::Rectangle aRect = pObj->GetSnapRect();
aPt = bTopRight ? aRect.TopRight() : aRect.TopLeft();
}
if ( aPt != aMyPt )
{
if ( pAnch && pAnch->IsContentFrame() )
{
// allow drawing objects in header/footer,
// but exclude control objects.
bool bBodyOnly = CheckControlLayer( pObj );
pAnch = ::FindAnchor( static_cast<const SwContentFrame*>(pAnch), aPt, bBodyOnly );
}
else if ( !pFlyDrawObj )
{
const SwRect aRect( aPt.getX(), aPt.getY(), 1, 1 );
if (SwDrawContact* pContact = static_cast<SwDrawContact*>(GetUserCall(pObj)))
{
if ( pContact->GetAnchorFrame( pObj ) &&
pContact->GetAnchorFrame( pObj )->IsPageFrame() )
pAnch = pContact->GetPageFrame();
else
pAnch = pContact->FindPage( aRect );
}
}
}
if( pAnch && !pAnch->IsProtected() )
m_aAnchorPoint = pAnch->GetFrameAnchorPos( ::HasWrap( pObj ) );
else
pAnch = nullptr;
return pAnch;
}
void SwDrawView::ShowDragAnchor()
{
SdrHdl* pHdl = maHdlList.GetHdl(SdrHdlKind::Anchor);
if ( ! pHdl )
pHdl = maHdlList.GetHdl(SdrHdlKind::Anchor_TR);
if(pHdl)
{
CalcAnchor();
pHdl->SetPos(m_aAnchorPoint);
}
}
void SwDrawView::MarkListHasChanged()
{
Imp().GetShell()->DrawSelChanged();
FmFormView::MarkListHasChanged();
}
// #i7672#
void SwDrawView::ModelHasChanged()
{
// The ModelHasChanged() call in DrawingLayer also updates
// an eventually active text edit view (OutlinerView). This also leads
// to newly setting the background color for that edit view. Thus,
// this method rescues the current background color if an OutlinerView
// exists and re-establishes it then. To be more safe, the OutlinerView
// will be fetched again (maybe textedit has ended).
OutlinerView* pView = GetTextEditOutlinerView();
Color aBackColor;
bool bColorWasSaved(false);
if(pView)
{
aBackColor = pView->GetBackgroundColor();
bColorWasSaved = true;
}
// call parent
FmFormView::ModelHasChanged();
if(bColorWasSaved)
{
pView = GetTextEditOutlinerView();
if(pView)
{
pView->SetBackgroundColor(aBackColor);
}
}
}
void SwDrawView::MakeVisible( const tools::Rectangle &rRect, vcl::Window & )
{
OSL_ENSURE( m_rImp.GetShell()->GetWin(), "MakeVisible, unknown Window");
m_rImp.GetShell()->MakeVisible( SwRect( rRect ) );
}
void SwDrawView::CheckPossibilities()
{
FmFormView::CheckPossibilities();
//In addition to the existing flags of the objects themselves,
//which are evaluated by the DrawingEngine, other circumstances
//lead to a protection.
//Objects that are anchored in frames need to be protected
//if the content of the frame is protected.
//OLE-Objects may themselves wish a resize protection (StarMath)
const SdrMarkList &rMrkList = GetMarkedObjectList();
bool bProtect = false;
bool bSzProtect = false;
bool bRotate(false);
for ( size_t i = 0; !bProtect && i < rMrkList.GetMarkCount(); ++i )
{
const SdrObject *pObj = rMrkList.GetMark( i )->GetMarkedSdrObj();
const SwFrame *pFrame = nullptr;
if ( auto pVirtFlyDrawObj = dynamic_cast< const SwVirtFlyDrawObj *>( pObj ) )
{
const SwFlyFrame *pFly = pVirtFlyDrawObj->GetFlyFrame();
if ( pFly )
{
pFrame = pFly->GetAnchorFrame();
if ( pFly->Lower() && pFly->Lower()->IsNoTextFrame() )
{
const SwNoTextFrame *const pNTF(static_cast<const SwNoTextFrame*>(pFly->Lower()));
const SwOLENode *const pOLENd = pNTF->GetNode()->GetOLENode();
const SwGrfNode *const pGrfNd = pNTF->GetNode()->GetGrfNode();
if ( pOLENd )
{
const uno::Reference < embed::XEmbeddedObject > xObj = const_cast< SwOLEObj& >(pOLENd->GetOLEObj()).GetOleRef();
if ( xObj.is() )
{
// --> improvement for the future, when more
// than one Writer fly frame can be selected.
// TODO/LATER: retrieve Aspect - from where?!
bSzProtect |= ( embed::EmbedMisc::EMBED_NEVERRESIZE & xObj->getStatus( embed::Aspects::MSOLE_CONTENT ) ) != 0;
// #i972: protect position if it is a Math object anchored 'as char' and baseline alignment is activated
SwDoc* pDoc = Imp().GetShell()->GetDoc();
const bool bProtectMathPos = SotExchange::IsMath( xObj->getClassID() )
&& RndStdIds::FLY_AS_CHAR == pFly->GetFormat()->GetAnchor().GetAnchorId()
&& pDoc->GetDocumentSettingManager().get( DocumentSettingId::MATH_BASELINE_ALIGNMENT );
if (bProtectMathPos)
m_bMoveProtect = true;
}
}
else if(pGrfNd)
{
// RotGrfFlyFrame: GraphicNode allows rotation(s). The loop ew are in stops
// as soon as bMoveProtect is set, but since rotation is valid only with
// a single object selected this makes no difference
bRotate = true;
}
}
}
}
else
{
SwDrawContact *pC = static_cast<SwDrawContact*>(GetUserCall(pObj));
if ( pC )
pFrame = pC->GetAnchorFrame( pObj );
}
if ( pFrame )
bProtect = pFrame->IsProtected(); //Frames, areas etc.
{
SwFrameFormat* pFrameFormat( ::FindFrameFormat( const_cast<SdrObject*>(pObj) ) );
if ( !pFrameFormat )
{
OSL_FAIL( "<SwDrawView::CheckPossibilities()> - missing frame format" );
bProtect = true;
}
else if ((RndStdIds::FLY_AS_CHAR == pFrameFormat->GetAnchor().GetAnchorId()) &&
rMrkList.GetMarkCount() > 1 )
{
bProtect = true;
}
}
}
m_bMoveProtect |= bProtect;
m_bResizeProtect |= bProtect || bSzProtect;
// RotGrfFlyFrame: allow rotation when SwGrfNode is selected and not size protected
m_bRotateFreeAllowed |= bRotate && !bProtect;
m_bRotate90Allowed |= m_bRotateFreeAllowed;
}
/// replace marked <SwDrawVirtObj>-objects by its reference object for delete marked objects.
void SwDrawView::ReplaceMarkedDrawVirtObjs( SdrMarkView& _rMarkView )
{
SdrPageView* pDrawPageView = _rMarkView.GetSdrPageView();
const SdrMarkList& rMarkList = _rMarkView.GetMarkedObjectList();
if( !rMarkList.GetMarkCount() )
return;
// collect marked objects in a local data structure
std::vector<SdrObject*> aMarkedObjs;
for( size_t i = 0; i < rMarkList.GetMarkCount(); ++i )
{
SdrObject* pMarkedObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
aMarkedObjs.push_back( pMarkedObj );
}
// unmark all objects
_rMarkView.UnmarkAllObj();
// re-mark objects, but for marked <SwDrawVirtObj>-objects marked its
// reference object.
while ( !aMarkedObjs.empty() )
{
SdrObject* pMarkObj = aMarkedObjs.back();
if ( auto pVirtObj = dynamic_cast<SwDrawVirtObj *>( pMarkObj ) )
{
SdrObject* pRefObj = &(pVirtObj->ReferencedObj());
if ( !_rMarkView.IsObjMarked( pRefObj ) )
{
_rMarkView.MarkObj( pRefObj, pDrawPageView );
}
}
else
{
_rMarkView.MarkObj( pMarkObj, pDrawPageView );
}
aMarkedObjs.pop_back();
}
// sort marked list in order to assure consistent state in drawing layer
_rMarkView.GetMarkedObjectList().ForceSort();
}
SfxViewShell* SwDrawView::GetSfxViewShell() const
{
return m_rImp.GetShell()->GetSfxViewShell();
}
void SwDrawView::DeleteMarked()
{
SwDoc* pDoc = Imp().GetShell()->GetDoc();
SwRootFrame *pTmpRoot = pDoc->getIDocumentLayoutAccess().GetCurrentLayout();
if ( pTmpRoot )
pTmpRoot->StartAllAction();
pDoc->GetIDocumentUndoRedo().StartUndo(SwUndoId::EMPTY, nullptr);
// replace marked <SwDrawVirtObj>-objects by its reference objects.
if (SdrPageView* pDrawPageView = m_rImp.GetPageView())
{
ReplaceMarkedDrawVirtObjs(pDrawPageView->GetView());
}
// Check what textboxes have to be deleted afterwards.
const SdrMarkList& rMarkList = GetMarkedObjectList();
std::vector<SwFrameFormat*> aTextBoxesToDelete;
for (size_t i = 0; i < rMarkList.GetMarkCount(); ++i)
{
SdrObject *pObject = rMarkList.GetMark(i)->GetMarkedSdrObj();
SwContact* pContact = GetUserCall(pObject);
if (pContact)
{
SwFrameFormat* pFormat = pContact->GetFormat();
if (pObject->getChildrenOfSdrObject())
{
auto pChildTextBoxes = SwTextBoxHelper::CollectTextBoxes(pObject, pFormat);
for (auto& rChildTextBox : pChildTextBoxes)
aTextBoxesToDelete.push_back(rChildTextBox);
}
else if (SwFrameFormat* pTextBox
= SwTextBoxHelper::getOtherTextBoxFormat(pFormat, RES_DRAWFRMFMT))
aTextBoxesToDelete.push_back(pTextBox);
}
}
if ( pDoc->DeleteSelection( *this ) )
{
FmFormView::DeleteMarked();
::FrameNotify( Imp().GetShell(), FLY_DRAG_END );
}
// Only delete these now: earlier deletion would clear the mark list as well.
// Delete in reverse order, assuming that the container is sorted by anchor positions.
for (int i = aTextBoxesToDelete.size() - 1; i >= 0; --i)
{
SwFrameFormat*& rpTextBox = aTextBoxesToDelete[i];
pDoc->getIDocumentLayoutAccess().DelLayoutFormat(rpTextBox);
}
pDoc->GetIDocumentUndoRedo().EndUndo(SwUndoId::EMPTY, nullptr);
if( pTmpRoot )
pTmpRoot->EndAllAction();
}
// Create a new view-local UndoManager manager for Writer
std::unique_ptr<SdrUndoManager> SwDrawView::createLocalTextUndoManager()
{
std::unique_ptr<SdrUndoManager> pUndoManager(new SdrUndoManager);
pUndoManager->SetDocShell(SfxObjectShell::Current());
return pUndoManager;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1051 Consider checking for misprints. It's possible that the 'pAnchoredObj' should be checked here.