/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <config_features.h>
#include <hintids.hxx>
#include <svl/whiter.hxx>
#include <sfx2/viewfrm.hxx>
#include <basic/sbstar.hxx>
#include <svl/ptitem.hxx>
#include <svl/stritem.hxx>
#include <svl/intitem.hxx>
#include <svl/eitem.hxx>
#include <editeng/colritem.hxx>
#include <editeng/lineitem.hxx>
#include <editeng/boxitem.hxx>
#include <sfx2/dispatch.hxx>
#include <sfx2/request.hxx>
#include <sfx2/objface.hxx>
#include <vcl/EnumContext.hxx>
#include <svx/hlnkitem.hxx>
#include <svx/svdview.hxx>
#include <svx/sdangitm.hxx>
#include <vcl/commandinfoprovider.hxx>
#include <sal/log.hxx>
#include <doc.hxx>
#include <drawdoc.hxx>
#include <IDocumentSettingAccess.hxx>
#include <IDocumentDrawModelAccess.hxx>
#include <fmturl.hxx>
#include <fmtclds.hxx>
#include <fmtcnct.hxx>
#include <swmodule.hxx>
#include <wrtsh.hxx>
#include <wview.hxx>
#include <uitool.hxx>
#include <frmfmt.hxx>
#include <frmsh.hxx>
#include <frmmgr.hxx>
#include <edtwin.hxx>
#include <swdtflvr.hxx>
#include <viewopt.hxx>
#include <cmdid.h>
#include <strings.hrc>
#include <swabstdlg.hxx>
#include <svx/svxdlg.hxx>
#include <docsh.hxx>
#include <svx/drawitem.hxx>
#include <memory>
#define ShellClass_SwFrameShell
#include <sfx2/msg.hxx>
#include <swslots.hxx>
#include <grfatr.hxx>
#include <fldmgr.hxx>
#include <flyfrm.hxx>
using ::editeng::SvxBorderLine;
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
// Prototypes
static void lcl_FrameGetMaxLineWidth(const SvxBorderLine* pBorderLine, SvxBorderLine& rBorderLine);
SFX_IMPL_INTERFACE(SwFrameShell, SwBaseShell)
void SwFrameShell::InitInterface_Impl()
{
GetStaticInterface()->RegisterPopupMenu(u"frame"_ustr);
GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Invisible, ToolbarId::Frame_Toolbox);
}
void SwFrameShell::ExecMove(SfxRequest& rReq)
{
SwWrtShell& rSh = GetShell();
sal_uInt16 nSlot = rReq.GetSlot();
switch (nSlot)
{
case SID_SELECTALL:
rSh.SelAll();
rReq.Done();
break;
}
}
void SwFrameShell::ExecField(const SfxRequest& rReq)
{
SwWrtShell& rSh = GetShell();
sal_uInt16 nSlot = rReq.GetSlot();
switch (nSlot)
{
case FN_POSTIT:
SwFieldMgr aFieldMgr(&rSh);
rSh.InsertPostIt(aFieldMgr, rReq);
break;
}
}
void SwFrameShell::Execute(SfxRequest &rReq)
{
//First those who do not need FrameMgr.
SwWrtShell &rSh = GetShell();
bool bMore = false;
const SfxItemSet* pArgs = rReq.GetArgs();
const SfxPoolItem* pItem;
sal_uInt16 nSlot = rReq.GetSlot();
switch ( nSlot )
{
case FN_FRAME_TO_ANCHOR:
if ( rSh.IsFrameSelected() )
{
rSh.GotoFlyAnchor();
rSh.EnterStdMode();
rSh.CallChgLnk();
}
break;
case SID_FRAME_TO_TOP:
rSh.SelectionToTop();
break;
case SID_FRAME_TO_BOTTOM:
rSh.SelectionToBottom();
break;
case FN_FRAME_UP:
rSh.SelectionToTop( false );
break;
case FN_FRAME_DOWN:
rSh.SelectionToBottom( false );
break;
case FN_INSERT_FRAME:
if (!pArgs)
{
// Frame already exists, open frame dialog for editing.
SfxStringItem aDefPage(FN_FORMAT_FRAME_DLG, u"columns"_ustr);
rSh.GetView().GetViewFrame().GetDispatcher()->ExecuteList(
FN_FORMAT_FRAME_DLG,
SfxCallMode::SYNCHRON|SfxCallMode::RECORD,
{ &aDefPage });
}
else
{
// Frame already exists, only the number of columns will be changed.
sal_uInt16 nCols = 1;
if(const SfxUInt16Item* pColsItem = pArgs->GetItemIfSet(SID_ATTR_COLUMNS, false))
nCols = pColsItem->GetValue();
SfxItemSetFixed<RES_COL,RES_COL> aSet(GetPool());
rSh.GetFlyFrameAttr( aSet );
SwFormatCol aCol(aSet.Get(RES_COL));
// GutterWidth will not always passed, hence get firstly
// (see view2: Execute on this slot)
sal_uInt16 nGutterWidth = aCol.GetGutterWidth();
if(!nCols )
nCols++;
aCol.Init(nCols, nGutterWidth, aCol.GetWishWidth());
aSet.Put(aCol);
// Template AutoUpdate
SwFrameFormat* pFormat = rSh.GetSelectedFrameFormat();
if(pFormat && pFormat->IsAutoUpdateOnDirectFormat())
{
rSh.AutoUpdateFrame(pFormat, aSet);
}
else
{
rSh.StartAllAction();
rSh.SetFlyFrameAttr( aSet );
rSh.SetModified();
rSh.EndAllAction();
}
}
return;
case SID_HYPERLINK_SETLINK:
{
if(pArgs && SfxItemState::SET == pArgs->GetItemState(SID_HYPERLINK_SETLINK, false, &pItem))
{
const SvxHyperlinkItem& rHLinkItem = *static_cast<const SvxHyperlinkItem *>(pItem);
const OUString& rURL = rHLinkItem.GetURL();
const OUString& rTarget = rHLinkItem.GetTargetFrame();
SfxItemSetFixed<RES_URL, RES_URL> aSet( rSh.GetAttrPool() );
rSh.GetFlyFrameAttr( aSet );
SwFormatURL aURL( aSet.Get( RES_URL ) );
OUString sOldName(rHLinkItem.GetName().toAsciiUpperCase());
OUString sFlyName(rSh.GetFlyName().toAsciiUpperCase());
if (sOldName != sFlyName)
{
OUString sName(sOldName);
sal_uInt16 i = 1;
while (rSh.FindFlyByName(sName))
{
sName = sOldName + "_" + OUString::number(i++);
}
rSh.SetFlyName(sName);
}
aURL.SetURL( rURL, false );
aURL.SetTargetFrameName(rTarget);
aSet.Put( aURL );
rSh.SetFlyFrameAttr( aSet );
}
}
break;
case FN_FRAME_CHAIN:
rSh.GetView().GetEditWin().SetChainMode( !rSh.GetView().GetEditWin().IsChainMode() );
break;
case FN_FRAME_UNCHAIN:
rSh.Unchain( *rSh.GetFlyFrameFormat() );
GetView().GetViewFrame().GetBindings().Invalidate(FN_FRAME_CHAIN);
break;
case FN_FORMAT_FOOTNOTE_DLG:
{
GetView().ExecFormatFootnote();
break;
}
case FN_NUMBERING_OUTLINE_DLG:
{
GetView().ExecNumberingOutline(GetPool());
rReq.Done();
break;
}
case SID_OPEN_XML_FILTERSETTINGS:
{
HandleOpenXmlFilterSettings(rReq);
}
break;
case FN_WORDCOUNT_DIALOG:
{
GetView().UpdateWordCount(this, nSlot);
break;
}
case FN_UNFLOAT_FRAME:
{
rSh.UnfloatFlyFrame();
rReq.Done();
break;
}
default: bMore = true;
}
if ( !bMore )
{
return;
}
SwFlyFrameAttrMgr aMgr( false, &rSh, Frmmgr_Type::NONE, nullptr );
bool bUpdateMgr = true;
bool bCopyToFormat = false;
switch ( nSlot )
{
case SID_OBJECT_ALIGN_MIDDLE:
case FN_FRAME_ALIGN_VERT_CENTER:
aMgr.SetVertOrientation( text::VertOrientation::CENTER );
break;
case SID_OBJECT_ALIGN_DOWN :
case FN_FRAME_ALIGN_VERT_BOTTOM:
aMgr.SetVertOrientation( text::VertOrientation::BOTTOM );
break;
case SID_OBJECT_ALIGN_UP :
case FN_FRAME_ALIGN_VERT_TOP:
aMgr.SetVertOrientation( text::VertOrientation::TOP );
break;
case FN_FRAME_ALIGN_VERT_CHAR_CENTER:
aMgr.SetVertOrientation( text::VertOrientation::CHAR_CENTER );
break;
case FN_FRAME_ALIGN_VERT_CHAR_BOTTOM:
aMgr.SetVertOrientation( text::VertOrientation::CHAR_BOTTOM );
break;
case FN_FRAME_ALIGN_VERT_CHAR_TOP:
aMgr.SetVertOrientation( text::VertOrientation::CHAR_TOP );
break;
case FN_FRAME_ALIGN_VERT_ROW_CENTER:
aMgr.SetVertOrientation( text::VertOrientation::LINE_CENTER );
break;
case FN_FRAME_ALIGN_VERT_ROW_BOTTOM:
aMgr.SetVertOrientation( text::VertOrientation::LINE_BOTTOM );
break;
case FN_FRAME_ALIGN_VERT_ROW_TOP:
aMgr.SetVertOrientation( text::VertOrientation::LINE_TOP );
break;
case SID_OBJECT_ALIGN_CENTER :
case FN_FRAME_ALIGN_HORZ_CENTER:
aMgr.SetHorzOrientation( text::HoriOrientation::CENTER );
break;
case SID_OBJECT_ALIGN_RIGHT:
case FN_FRAME_ALIGN_HORZ_RIGHT:
aMgr.SetHorzOrientation( text::HoriOrientation::RIGHT );
break;
case SID_OBJECT_ALIGN_LEFT:
case FN_FRAME_ALIGN_HORZ_LEFT:
aMgr.SetHorzOrientation( text::HoriOrientation::LEFT );
break;
case FN_SET_FRM_POSITION:
{
aMgr.SetAbsPos(static_cast<const SfxPointItem &>(pArgs->Get
(FN_SET_FRM_POSITION)).GetValue());
}
break;
case SID_ATTR_BRUSH:
{
if(pArgs)
{
aMgr.SetAttrSet( *pArgs );
bCopyToFormat = true;
}
}
break;
case SID_ATTR_ULSPACE:
case SID_ATTR_LRSPACE:
{
if(pArgs && SfxItemState::SET == pArgs->GetItemState(GetPool().GetWhichIDFromSlotID(nSlot), false, &pItem))
{
aMgr.SetAttrSet( *pArgs );
bCopyToFormat = true;
}
}
break;
case SID_ATTR_TRANSFORM:
{
bool bApplyNewPos = false;
bool bApplyNewSize = false;
Point aNewPos = aMgr.GetPos();
if (pArgs)
{
if (const SfxInt32Item* pXItem = pArgs->GetItemIfSet(SID_ATTR_TRANSFORM_POS_X, false))
{
aNewPos.setX( pXItem->GetValue() );
bApplyNewPos = true;
}
if (const SfxInt32Item* pYItem = pArgs->GetItemIfSet(SID_ATTR_TRANSFORM_POS_Y, false))
{
aNewPos.setY( pYItem->GetValue() );
bApplyNewPos = true;
}
}
Size aNewSize = aMgr.GetSize();
if (pArgs)
{
if (const SfxUInt32Item* pWidthItem = pArgs->GetItemIfSet(SID_ATTR_TRANSFORM_WIDTH, false))
{
aNewSize.setWidth( pWidthItem->GetValue() );
bApplyNewSize = true;
}
if (const SfxUInt32Item* pHeightItem = pArgs->GetItemIfSet(SID_ATTR_TRANSFORM_HEIGHT, false))
{
aNewSize.setHeight( pHeightItem->GetValue() );
bApplyNewSize = true;
}
}
if (pArgs && (pArgs->HasItem(SID_ATTR_TRANSFORM_ANGLE) || pArgs->HasItem(SID_ATTR_TRANSFORM_DELTA_ANGLE)))
{
SfxItemSetFixed<RES_GRFATR_ROTATION, RES_GRFATR_ROTATION> aSet(rSh.GetAttrPool() );
rSh.GetCurAttr(aSet);
const SwRotationGrf& rRotation = aSet.Get(RES_GRFATR_ROTATION);
const Degree10 nOldRot(rRotation.GetValue());
if (const SdrAngleItem* pAngleItem = pArgs->GetItemIfSet(SID_ATTR_TRANSFORM_DELTA_ANGLE, false))
{
const Degree10 nDeltaRot = to<Degree10>(pAngleItem->GetValue());
aMgr.SetRotation(nOldRot, nOldRot + nDeltaRot, rRotation.GetUnrotatedSize());
}
// RotGrfFlyFrame: Get Value and disable is in SwGrfShell::GetAttrStateForRotation, but the
// value setter uses SID_ATTR_TRANSFORM and a group of three values. Rotation is
// added now, so use it in this central place. Do no forget to convert angle from
// 100th degrees in SID_ATTR_TRANSFORM_ANGLE to 10th degrees in RES_GRFATR_ROTATION
if (const SdrAngleItem* pTransformItem = pArgs->GetItemIfSet(SID_ATTR_TRANSFORM_ANGLE, false))
{
const Degree10 nNewRot = to<Degree10>(pTransformItem->GetValue());
// RotGrfFlyFrame: Rotation change here, SwFlyFrameAttrMgr aMgr is available
aMgr.SetRotation(nOldRot, nNewRot, rRotation.GetUnrotatedSize());
}
}
if (bApplyNewPos)
{
aMgr.SetAbsPos(aNewPos);
}
if ( bApplyNewSize )
{
aMgr.SetSize( aNewSize );
}
if (!bApplyNewPos && !bApplyNewSize)
{
bUpdateMgr = false;
}
}
break;
case FN_FORMAT_FRAME_DLG:
case FN_DRAW_WRAP_DLG:
{
const SelectionType nSel = rSh.GetSelectionType();
if (nSel & SelectionType::Graphic)
{
rSh.GetView().GetViewFrame().GetDispatcher()->Execute(FN_FORMAT_GRAFIC_DLG);
bUpdateMgr = false;
}
else
{
SfxItemSetFixed<
RES_FRMATR_BEGIN, RES_FRMATR_END - 1,
// FillAttribute support:
XATTR_FILL_FIRST, XATTR_FILL_LAST,
SID_DOCFRAME, SID_DOCFRAME,
SID_ATTR_BRUSH, SID_ATTR_BRUSH,
SID_ATTR_BORDER_INNER, SID_ATTR_BORDER_INNER,
SID_ATTR_LRSPACE, SID_ATTR_ULSPACE,
SID_ATTR_PAGE_SIZE, SID_ATTR_PAGE_SIZE,
// Items to hand over XPropertyList things like
// XColorList, XHatchList, XGradientList, and
// XBitmapList to the Area TabPage
SID_COLOR_TABLE, SID_PATTERN_LIST,
SID_HTML_MODE, SID_HTML_MODE,
FN_GET_PRINT_AREA, FN_GET_PRINT_AREA,
FN_SURROUND, FN_KEEP_ASPECT_RATIO,
FN_SET_FRM_ALT_NAME, FN_SET_FRM_ALT_NAME,
FN_UNO_DESCRIPTION, FN_UNO_DESCRIPTION,
FN_OLE_IS_MATH, FN_MATH_BASELINE_ALIGNMENT,
FN_PARAM_CHAIN_PREVIOUS, FN_PARAM_CHAIN_NEXT> aSet( GetPool() );
// create needed items for XPropertyList entries from the DrawModel so that
// the Area TabPage can access them
const SwDrawModel* pDrawModel = rSh.GetView().GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel();
pDrawModel->PutAreaListItems(aSet);
const SwViewOption* pVOpt = rSh.GetViewOptions();
if(nSel & SelectionType::Ole)
aSet.Put( SfxBoolItem(FN_KEEP_ASPECT_RATIO, pVOpt->IsKeepRatio()) );
aSet.Put(SfxUInt16Item(SID_HTML_MODE, ::GetHtmlMode(GetView().GetDocShell())));
aSet.Put(SfxStringItem(FN_SET_FRM_NAME, rSh.GetFlyName()));
aSet.Put(SfxStringItem(FN_UNO_DESCRIPTION, rSh.GetObjDescription()));
if( nSel & SelectionType::Ole )
{
// #i73249#
aSet.Put( SfxStringItem( FN_SET_FRM_ALT_NAME, rSh.GetObjTitle() ) );
}
const SwRect &rPg = rSh.GetAnyCurRect(CurRectType::Page);
SwFormatFrameSize aFrameSize(SwFrameSize::Variable, rPg.Width(), rPg.Height());
aFrameSize.SetWhich(GetPool().GetWhichIDFromSlotID(SID_ATTR_PAGE_SIZE));
aSet.Put(aFrameSize);
const SwRect &rPr = rSh.GetAnyCurRect(CurRectType::PagePrt);
SwFormatFrameSize aPrtSize(SwFrameSize::Variable, rPr.Width(), rPr.Height());
aPrtSize.SetWhich(GetPool().GetWhichIDFromSlotID(FN_GET_PRINT_AREA));
aSet.Put(aPrtSize);
aSet.Put(aMgr.GetAttrSet());
aSet.SetParent( aMgr.GetAttrSet().GetParent() );
// On % values initialize size
SwFormatFrameSize& rSize = const_cast<SwFormatFrameSize&>(aSet.Get(RES_FRM_SIZE));
if (rSize.GetWidthPercent() && rSize.GetWidthPercent() != SwFormatFrameSize::SYNCED)
rSize.SetWidth(rSh.GetAnyCurRect(CurRectType::FlyEmbedded).Width());
if (rSize.GetHeightPercent() && rSize.GetHeightPercent() != SwFormatFrameSize::SYNCED)
rSize.SetHeight(rSh.GetAnyCurRect(CurRectType::FlyEmbedded).Height());
// disable vertical positioning for Math Objects anchored 'as char' if baseline alignment is activated
aSet.Put( SfxBoolItem( FN_MATH_BASELINE_ALIGNMENT,
rSh.GetDoc()->getIDocumentSettingAccess().get( DocumentSettingId::MATH_BASELINE_ALIGNMENT ) ) );
const uno::Reference < embed::XEmbeddedObject > xObj( rSh.GetOleRef() );
aSet.Put( SfxBoolItem( FN_OLE_IS_MATH, xObj.is() && SotExchange::IsMath( xObj->getClassID() ) ) );
OUString sDefPage;
const SfxStringItem* pDlgItem;
if(pArgs && (pDlgItem = pArgs->GetItemIfSet(FN_FORMAT_FRAME_DLG, false)))
sDefPage = pDlgItem->GetValue();
aSet.Put(SfxFrameItem( SID_DOCFRAME, &GetView().GetViewFrame().GetFrame()));
FieldUnit eMetric = ::GetDfltMetric(dynamic_cast<SwWebView*>( &GetView()) != nullptr );
SW_MOD()->PutItem(SfxUInt16Item(SID_ATTR_METRIC, static_cast< sal_uInt16 >(eMetric) ));
SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
ScopedVclPtr<SfxAbstractTabDialog> pDlg(pFact->CreateFrameTabDialog(
nSel & SelectionType::Graphic ? u"PictureDialog"_ustr :
nSel & SelectionType::Ole ? u"ObjectDialog"_ustr:
u"FrameDialog"_ustr,
GetView().GetViewFrame(),
GetView().GetFrameWeld(),
aSet,
false,
sDefPage));
if ( nSlot == FN_DRAW_WRAP_DLG )
{
pDlg->SetCurPageId(u"wrap"_ustr);
}
if ( pDlg->Execute() )
{
const SfxItemSet* pOutSet = pDlg->GetOutputItemSet();
if(pOutSet)
{
rReq.Done(*pOutSet);
const SfxBoolItem* pRatioItem = nullptr;
if(nSel & SelectionType::Ole &&
(pRatioItem = pOutSet->GetItemIfSet(FN_KEEP_ASPECT_RATIO)))
{
SwViewOption aUsrPref( *pVOpt );
aUsrPref.SetKeepRatio(pRatioItem->GetValue());
SW_MOD()->ApplyUsrPref(aUsrPref, &GetView());
}
if (const SfxStringItem* pAltNameItem = pOutSet->GetItemIfSet(FN_SET_FRM_ALT_NAME))
{
// #i73249#
rSh.SetObjTitle(pAltNameItem->GetValue());
}
if (const SfxStringItem* pDescripItem = pOutSet->GetItemIfSet(FN_UNO_DESCRIPTION))
rSh.SetObjDescription(pDescripItem->GetValue());
// Template AutoUpdate
SwFrameFormat* pFormat = rSh.GetSelectedFrameFormat();
if(pFormat && pFormat->IsAutoUpdateOnDirectFormat())
{
rSh.AutoUpdateFrame(pFormat, *pOutSet);
// Anything which is not supported by the format must be set hard.
if(const SfxStringItem* pFrameName = pOutSet->GetItemIfSet(FN_SET_FRM_NAME, false))
rSh.SetFlyName(pFrameName->GetValue());
SfxItemSetFixed<
RES_FRM_SIZE, RES_FRM_SIZE,
RES_SURROUND, RES_ANCHOR> aShellSet( GetPool() );
aShellSet.Put(*pOutSet);
aMgr.SetAttrSet(aShellSet);
if(const SfxStringItem* pFrameName = pOutSet->GetItemIfSet(FN_SET_FRM_NAME, false))
rSh.SetFlyName(pFrameName->GetValue());
}
else
aMgr.SetAttrSet( *pOutSet );
const SwFrameFormat* pCurrFlyFormat = rSh.GetFlyFrameFormat();
if(const SfxStringItem* pPreviousItem =
pOutSet->GetItemIfSet(FN_PARAM_CHAIN_PREVIOUS, false))
{
rSh.HideChainMarker();
OUString sPrevName = pPreviousItem->GetValue();
const SwFormatChain &rChain = pCurrFlyFormat->GetChain();
//needs cast - no non-const method available
SwFlyFrameFormat* pFlyFormat =
rChain.GetPrev();
if(pFlyFormat)
{
if (pFlyFormat->GetName() != sPrevName)
{
rSh.Unchain(*pFlyFormat);
}
else
sPrevName.clear();
}
if (!sPrevName.isEmpty())
{
//needs cast - no non-const method available
SwFrameFormat* pPrevFormat = rSh.GetDoc()->GetFlyFrameFormatByName(sPrevName);
SAL_WARN_IF(!pPrevFormat, "sw.ui", "No frame found!");
if(pPrevFormat)
{
rSh.Chain(*pPrevFormat, *pCurrFlyFormat);
}
}
rSh.SetChainMarker();
}
if(const SfxStringItem* pChainNextItem =
pOutSet->GetItemIfSet(FN_PARAM_CHAIN_NEXT, false))
{
rSh.HideChainMarker();
OUString sNextName = pChainNextItem->GetValue();
const SwFormatChain &rChain = pCurrFlyFormat->GetChain();
//needs cast - no non-const method available
SwFlyFrameFormat* pFlyFormat =
rChain.GetNext();
if(pFlyFormat)
{
if (pFlyFormat->GetName() != sNextName)
{
rSh.Unchain(*const_cast<SwFlyFrameFormat*>(static_cast<const SwFlyFrameFormat*>( pCurrFlyFormat)));
}
else
sNextName.clear();
}
if (!sNextName.isEmpty())
{
//needs cast - no non-const method available
SwFrameFormat* pNextFormat = rSh.GetDoc()->GetFlyFrameFormatByName(sNextName);
SAL_WARN_IF(!pNextFormat, "sw.ui", "No frame found!");
if(pNextFormat)
{
rSh.Chain(*const_cast<SwFrameFormat*>(
pCurrFlyFormat), *pNextFormat);
}
}
rSh.SetChainMarker();
}
}
}
else
bUpdateMgr = false;
}
}
break;
case FN_FRAME_MIRROR_ON_EVEN_PAGES:
{
SwFormatHoriOrient aHori(aMgr.GetHoriOrient());
bool bMirror = !aHori.IsPosToggle();
aHori.SetPosToggle(bMirror);
SfxItemSetFixed<RES_HORI_ORIENT, RES_HORI_ORIENT> aSet(GetPool());
aSet.Put(aHori);
aMgr.SetAttrSet(aSet);
bCopyToFormat = true;
rReq.SetReturnValue(SfxBoolItem(nSlot, bMirror));
}
break;
case FN_NAME_SHAPE:
{
bUpdateMgr = false;
SdrView* pSdrView = rSh.GetDrawViewWithValidMarkList();
if ( pSdrView &&
pSdrView->GetMarkedObjectList().GetMarkCount() == 1 )
{
OUString aName(rSh.GetFlyName());
SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
VclPtr<AbstractSvxObjectNameDialog> pDlg(
pFact->CreateSvxObjectNameDialog(GetView().GetFrameWeld(), aName));
pDlg->StartExecuteAsync(
[this, pDlg] (sal_Int32 nResult)->void
{
if (nResult == RET_OK)
GetShell().SetFlyName(pDlg->GetName());
pDlg->disposeOnce();
}
);
}
}
break;
// #i73249#
case FN_TITLE_DESCRIPTION_SHAPE:
{
bUpdateMgr = false;
SdrView* pSdrView = rSh.GetDrawViewWithValidMarkList();
if ( pSdrView &&
pSdrView->GetMarkedObjectList().GetMarkCount() == 1 )
{
OUString aDescription(rSh.GetObjDescription());
OUString aTitle(rSh.GetObjTitle());
bool isDecorative(rSh.IsObjDecorative());
SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
VclPtr<AbstractSvxObjectTitleDescDialog> pDlg(
pFact->CreateSvxObjectTitleDescDialog(GetView().GetFrameWeld(),
aTitle, aDescription, isDecorative));
pDlg->StartExecuteAsync(
[this, pDlg] (sal_Int32 nResult)->void
{
if (nResult == RET_OK)
{
GetShell().SetObjDescription(pDlg->GetDescription());
GetShell().SetObjTitle(pDlg->GetTitle());
GetShell().SetObjDecorative(pDlg->IsDecorative());
}
pDlg->disposeOnce();
}
);
}
}
break;
default:
assert(!"wrong dispatcher");
return;
}
if ( bUpdateMgr )
{
SwFrameFormat* pFormat = rSh.GetSelectedFrameFormat();
if ( bCopyToFormat && pFormat && pFormat->IsAutoUpdateOnDirectFormat() )
{
rSh.AutoUpdateFrame(pFormat, aMgr.GetAttrSet());
}
else
{
aMgr.UpdateFlyFrame();
}
}
}
void SwFrameShell::GetState(SfxItemSet& rSet)
{
SwWrtShell &rSh = GetShell();
bool bHtmlMode = 0 != ::GetHtmlMode(rSh.GetView().GetDocShell());
if (!rSh.IsFrameSelected())
return;
SfxItemSetFixed<
RES_LR_SPACE, RES_UL_SPACE,
RES_PRINT, RES_HORI_ORIENT> aSet(rSh.GetAttrPool() );
rSh.GetFlyFrameAttr( aSet );
bool bProtect = rSh.IsSelObjProtected(FlyProtectFlags::Pos) != FlyProtectFlags::NONE;
bool bParentCntProt = rSh.IsSelObjProtected( FlyProtectFlags::Content|FlyProtectFlags::Parent ) != FlyProtectFlags::NONE;
bProtect |= bParentCntProt;
const FrameTypeFlags eFrameType = rSh.GetFrameType(nullptr,true);
SwFlyFrameAttrMgr aMgr( false, &rSh, Frmmgr_Type::NONE, nullptr );
SfxWhichIter aIter( rSet );
sal_uInt16 nWhich = aIter.FirstWhich();
while ( nWhich )
{
switch ( nWhich )
{
case RES_FRM_SIZE:
{
const SwFormatFrameSize& aSz(aMgr.GetFrameSize());
rSet.Put(aSz);
}
break;
case RES_VERT_ORIENT:
case RES_HORI_ORIENT:
case SID_ATTR_ULSPACE:
case SID_ATTR_LRSPACE:
case RES_LR_SPACE:
case RES_UL_SPACE:
case RES_PROTECT:
case RES_OPAQUE:
case RES_PRINT:
case RES_SURROUND:
{
rSet.Put(aSet.Get(GetPool().GetWhichIDFromSlotID(nWhich)));
}
break;
case SID_OBJECT_ALIGN:
{
if ( bProtect )
rSet.DisableItem( nWhich );
}
break;
case SID_OBJECT_ALIGN_LEFT :
case SID_OBJECT_ALIGN_CENTER :
case SID_OBJECT_ALIGN_RIGHT :
case FN_FRAME_ALIGN_HORZ_CENTER:
case FN_FRAME_ALIGN_HORZ_RIGHT:
case FN_FRAME_ALIGN_HORZ_LEFT:
if ( (eFrameType & FrameTypeFlags::FLY_INCNT) ||
bProtect ||
((nWhich == FN_FRAME_ALIGN_HORZ_CENTER || nWhich == SID_OBJECT_ALIGN_CENTER) &&
bHtmlMode ))
{
rSet.DisableItem( nWhich );
}
else
{
sal_Int16 nHoriOrient = -1;
switch(nWhich)
{
case SID_OBJECT_ALIGN_LEFT:
nHoriOrient = text::HoriOrientation::LEFT;
break;
case SID_OBJECT_ALIGN_CENTER:
nHoriOrient = text::HoriOrientation::CENTER;
break;
case SID_OBJECT_ALIGN_RIGHT:
nHoriOrient = text::HoriOrientation::RIGHT;
break;
default:
break;
}
const SwFormatHoriOrient& aHOrient(aMgr.GetHoriOrient());
if (nHoriOrient != -1)
rSet.Put(SfxBoolItem(nWhich, nHoriOrient == aHOrient.GetHoriOrient()));
}
break;
case FN_FRAME_ALIGN_VERT_ROW_TOP:
case FN_FRAME_ALIGN_VERT_ROW_CENTER:
case FN_FRAME_ALIGN_VERT_ROW_BOTTOM:
case FN_FRAME_ALIGN_VERT_CHAR_TOP:
case FN_FRAME_ALIGN_VERT_CHAR_CENTER:
case FN_FRAME_ALIGN_VERT_CHAR_BOTTOM:
if ( !(eFrameType & FrameTypeFlags::FLY_INCNT) || bProtect
|| (bHtmlMode && FN_FRAME_ALIGN_VERT_CHAR_BOTTOM == nWhich) )
rSet.DisableItem( nWhich );
break;
case SID_OBJECT_ALIGN_UP :
case SID_OBJECT_ALIGN_MIDDLE :
case SID_OBJECT_ALIGN_DOWN :
case FN_FRAME_ALIGN_VERT_TOP:
case FN_FRAME_ALIGN_VERT_CENTER:
case FN_FRAME_ALIGN_VERT_BOTTOM:
if ( bProtect || (bHtmlMode && eFrameType & FrameTypeFlags::FLY_ATCNT))
rSet.DisableItem( nWhich );
else
{
// These slots need different labels depending on whether they are anchored in a character
// or on a paragraph/page etc.
OUString sNewLabel;
if (eFrameType & FrameTypeFlags::FLY_INCNT)
{
switch (nWhich)
{
case SID_OBJECT_ALIGN_UP :
case FN_FRAME_ALIGN_VERT_TOP:
sNewLabel = SwResId(STR_FRMUI_TOP_BASE);
break;
case SID_OBJECT_ALIGN_MIDDLE :
case FN_FRAME_ALIGN_VERT_CENTER:
sNewLabel = SwResId(STR_FRMUI_CENTER_BASE);
break;
case SID_OBJECT_ALIGN_DOWN :
case FN_FRAME_ALIGN_VERT_BOTTOM:
if(!bHtmlMode)
sNewLabel = SwResId(STR_FRMUI_BOTTOM_BASE);
else
rSet.DisableItem( nWhich );
break;
}
}
else
{
if (nWhich != FN_FRAME_ALIGN_VERT_TOP &&
nWhich != SID_OBJECT_ALIGN_UP )
{
if (aMgr.GetAnchor() == RndStdIds::FLY_AT_FLY)
{
const SwFrameFormat* pFormat = rSh.IsFlyInFly();
if (pFormat)
{
const SwFormatFrameSize& rFrameSz = pFormat->GetFrameSize();
if (rFrameSz.GetHeightSizeType() != SwFrameSize::Fixed)
{
rSet.DisableItem( nWhich );
break;
}
}
}
}
OUString aModuleName;
if (SfxViewFrame* pFrame = GetFrame())
aModuleName = vcl::CommandInfoProvider::GetModuleIdentifier(pFrame->GetFrame().GetFrameInterface());
switch (nWhich)
{
case SID_OBJECT_ALIGN_UP :
case FN_FRAME_ALIGN_VERT_TOP:
{
auto aProperties = vcl::CommandInfoProvider::GetCommandProperties(u".uno:AlignTop"_ustr, aModuleName);
sNewLabel = vcl::CommandInfoProvider::GetLabelForCommand(aProperties);
break;
}
case SID_OBJECT_ALIGN_MIDDLE:
case FN_FRAME_ALIGN_VERT_CENTER:
{
auto aProperties = vcl::CommandInfoProvider::GetCommandProperties(u".uno:AlignVerticalCenter"_ustr, aModuleName);
sNewLabel = vcl::CommandInfoProvider::GetLabelForCommand(aProperties);
break;
}
case SID_OBJECT_ALIGN_DOWN:
case FN_FRAME_ALIGN_VERT_BOTTOM:
{
auto aProperties = vcl::CommandInfoProvider::GetCommandProperties(u".uno:AlignBottom"_ustr, aModuleName);
sNewLabel = vcl::CommandInfoProvider::GetLabelForCommand(aProperties);
break;
}
}
}
if ( !sNewLabel.isEmpty() )
rSet.Put( SfxStringItem( nWhich, sNewLabel ));
}
break;
case SID_HYPERLINK_GETLINK:
{
SvxHyperlinkItem aHLinkItem;
SfxItemSetFixed<RES_URL, RES_URL> aURLSet(GetPool());
rSh.GetFlyFrameAttr( aURLSet );
if(const SwFormatURL* pFormatURL = aURLSet.GetItemIfSet(RES_URL))
{
aHLinkItem.SetURL(pFormatURL->GetURL());
aHLinkItem.SetTargetFrame(pFormatURL->GetTargetFrameName());
aHLinkItem.SetName(rSh.GetFlyName());
}
aHLinkItem.SetInsertMode(static_cast<SvxLinkInsertMode>(aHLinkItem.GetInsertMode() |
(bHtmlMode ? HLINK_HTMLMODE : 0)));
rSet.Put(aHLinkItem);
}
break;
case FN_FRAME_CHAIN:
{
const SelectionType nSel = rSh.GetSelectionType();
if (nSel & SelectionType::Graphic || nSel & SelectionType::Ole)
rSet.DisableItem( FN_FRAME_CHAIN );
else
{
const SwFrameFormat *pFormat = rSh.GetFlyFrameFormat();
if ( bParentCntProt || rSh.GetView().GetEditWin().GetApplyTemplate() ||
!pFormat || pFormat->GetChain().GetNext() )
{
rSet.DisableItem( FN_FRAME_CHAIN );
}
else
{
bool bChainMode = rSh.GetView().GetEditWin().IsChainMode();
rSet.Put( SfxBoolItem( FN_FRAME_CHAIN, bChainMode ) );
}
}
}
break;
case FN_FRAME_UNCHAIN:
{
const SelectionType nSel = rSh.GetSelectionType();
if (nSel & SelectionType::Graphic || nSel & SelectionType::Ole)
rSet.DisableItem( FN_FRAME_UNCHAIN );
else
{
const SwFrameFormat *pFormat = rSh.GetFlyFrameFormat();
if ( bParentCntProt || rSh.GetView().GetEditWin().GetApplyTemplate() ||
!pFormat || !pFormat->GetChain().GetNext() )
{
rSet.DisableItem( FN_FRAME_UNCHAIN );
}
}
}
break;
case SID_FRAME_TO_TOP:
case SID_FRAME_TO_BOTTOM:
case FN_FRAME_UP:
case FN_FRAME_DOWN:
if ( bParentCntProt )
rSet.DisableItem( nWhich );
break;
case SID_ATTR_TRANSFORM:
{
rSet.DisableItem( nWhich );
}
break;
case SID_ATTR_TRANSFORM_PROTECT_SIZE:
{
const FlyProtectFlags eProtection = rSh.IsSelObjProtected( FlyProtectFlags::Size );
if ( ( eProtection & FlyProtectFlags::Content ) ||
( eProtection & FlyProtectFlags::Size ) )
{
rSet.Put( SfxBoolItem( SID_ATTR_TRANSFORM_PROTECT_SIZE, true ) );
}
else
{
rSet.Put( SfxBoolItem( SID_ATTR_TRANSFORM_PROTECT_SIZE, false ) );
}
}
break;
case SID_ATTR_TRANSFORM_WIDTH:
{
rSet.Put( SfxUInt32Item( SID_ATTR_TRANSFORM_WIDTH, aMgr.GetSize().getWidth() ) );
}
break;
case SID_ATTR_TRANSFORM_HEIGHT:
{
rSet.Put( SfxUInt32Item( SID_ATTR_TRANSFORM_HEIGHT, aMgr.GetSize().getHeight() ) );
}
break;
case FN_FORMAT_FRAME_DLG:
{
const SelectionType nSel = rSh.GetSelectionType();
if ( bParentCntProt || nSel & SelectionType::Graphic)
rSet.DisableItem( nWhich );
}
break;
// #i73249#
case FN_TITLE_DESCRIPTION_SHAPE:
case FN_NAME_SHAPE:
{
SwWrtShell &rWrtSh = GetShell();
SdrView* pSdrView = rWrtSh.GetDrawViewWithValidMarkList();
if ( !pSdrView ||
pSdrView->GetMarkedObjectList().GetMarkCount() != 1 )
{
rSet.DisableItem( nWhich );
}
}
break;
case FN_POSTIT:
{
SwFlyFrame* pFly = rSh.GetSelectedFlyFrame();
if (pFly)
{
SwFrameFormat* pFormat = pFly->GetFormat();
if (pFormat)
{
RndStdIds eAnchorId = pFormat->GetAnchor().GetAnchorId();
// SwWrtShell::InsertPostIt() only works on as-char and at-char anchored
// images.
if (eAnchorId != RndStdIds::FLY_AS_CHAR && eAnchorId != RndStdIds::FLY_AT_CHAR)
{
rSet.DisableItem(nWhich);
}
}
}
}
break;
default:
/* do nothing */;
break;
}
nWhich = aIter.NextWhich();
}
}
SwFrameShell::SwFrameShell(SwView &_rView) :
SwBaseShell( _rView )
{
SetName(u"Frame"_ustr);
// #96392# Use this to announce it is the frame shell who creates the selection.
SwTransferable::CreateSelection( _rView.GetWrtShell(), this );
SfxShell::SetContextName(vcl::EnumContext::GetContextName(vcl::EnumContext::Context::Frame));
}
SwFrameShell::~SwFrameShell()
{
// #96392# Only clear the selection if it was this frame shell who created it.
SwTransferable::ClearSelection( GetShell(), this );
}
void SwFrameShell::ExecFrameStyle(SfxRequest const & rReq)
{
SwWrtShell &rSh = GetShell();
bool bDefault = false;
if (!rSh.IsFrameSelected())
return;
// At first pick the default BoxItem out of the pool.
// If unequal to regular box item, then it has already
// been changed (New one is no default).
const SvxBoxItem* pPoolBoxItem = ::GetDfltAttr(RES_BOX);
const SfxItemSet *pArgs = rReq.GetArgs();
SfxItemSetFixed<RES_BOX, RES_BOX> aFrameSet(rSh.GetAttrPool());
rSh.GetFlyFrameAttr( aFrameSet );
const SvxBoxItem& rBoxItem = aFrameSet.Get(RES_BOX);
if (SfxPoolItem::areSame(pPoolBoxItem, &rBoxItem))
bDefault = true;
std::unique_ptr<SvxBoxItem> aBoxItem(rBoxItem.Clone());
SvxBorderLine aBorderLine;
if(pArgs) // Any controller can sometimes deliver nothing #48169#
{
switch (rReq.GetSlot())
{
case SID_ATTR_BORDER:
{
if (const SvxBoxItem* pBoxItem = pArgs->GetItemIfSet(RES_BOX))
{
std::unique_ptr<SvxBoxItem> aNewBox(pBoxItem->Clone());
const SvxBorderLine* pBorderLine;
pBorderLine = aBoxItem->GetTop();
if (pBorderLine != nullptr)
lcl_FrameGetMaxLineWidth(pBorderLine, aBorderLine);
pBorderLine = aBoxItem->GetBottom();
if (pBorderLine != nullptr)
lcl_FrameGetMaxLineWidth(pBorderLine, aBorderLine);
pBorderLine = aBoxItem->GetLeft();
if (pBorderLine != nullptr)
lcl_FrameGetMaxLineWidth(pBorderLine, aBorderLine);
pBorderLine = aBoxItem->GetRight();
if (pBorderLine != nullptr)
lcl_FrameGetMaxLineWidth(pBorderLine, aBorderLine);
if(aBorderLine.GetOutWidth() == 0)
{
aBorderLine.SetBorderLineStyle(
SvxBorderLineStyle::SOLID);
aBorderLine.SetWidth( SvxBorderLineWidth::Hairline );
}
//Set distance only if the request is received from the controller.
#if HAVE_FEATURE_SCRIPTING
if(!StarBASIC::IsRunning())
#endif
{
// TODO: should this copy 4 individual Dist instead?
aNewBox->SetAllDistances(rBoxItem.GetSmallestDistance());
}
aBoxItem = std::move(aNewBox);
if( aBoxItem->GetTop() != nullptr )
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::TOP);
if( aBoxItem->GetBottom() != nullptr )
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::BOTTOM);
if( aBoxItem->GetLeft() != nullptr )
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::LEFT);
if( aBoxItem->GetRight() != nullptr )
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::RIGHT);
}
}
break;
case SID_FRAME_LINESTYLE:
{
if ( const SvxLineItem* pLineItem = pArgs->GetItemIfSet(SID_FRAME_LINESTYLE, false))
{
if ( pLineItem->GetLine() )
{
aBorderLine = *(pLineItem->GetLine());
if (!aBoxItem->GetTop() && !aBoxItem->GetBottom() &&
!aBoxItem->GetLeft() && !aBoxItem->GetRight())
{
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::TOP);
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::BOTTOM);
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::LEFT);
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::RIGHT);
}
else
{
if( aBoxItem->GetTop() )
{
aBorderLine.SetColor( aBoxItem->GetTop()->GetColor() );
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::TOP);
}
if( aBoxItem->GetBottom() )
{
aBorderLine.SetColor( aBoxItem->GetBottom()->GetColor());
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::BOTTOM);
}
if( aBoxItem->GetLeft() )
{
aBorderLine.SetColor( aBoxItem->GetLeft()->GetColor());
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::LEFT);
}
if( aBoxItem->GetRight() )
{
aBorderLine.SetColor(aBoxItem->GetRight()->GetColor());
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::RIGHT);
}
}
}
else
{
aBoxItem->SetLine(nullptr, SvxBoxItemLine::TOP);
aBoxItem->SetLine(nullptr, SvxBoxItemLine::BOTTOM);
aBoxItem->SetLine(nullptr, SvxBoxItemLine::LEFT);
aBoxItem->SetLine(nullptr, SvxBoxItemLine::RIGHT);
}
}
}
break;
case SID_FRAME_LINECOLOR:
{
if (const SvxColorItem* pColorItem = pArgs->GetItemIfSet(SID_FRAME_LINECOLOR, false))
{
const Color& rNewColor = pColorItem->GetValue();
if (!aBoxItem->GetTop() && !aBoxItem->GetBottom() &&
!aBoxItem->GetLeft() && !aBoxItem->GetRight())
{
aBorderLine.SetColor( rNewColor );
aBorderLine.SetBorderLineStyle(SvxBorderLineStyle::SOLID);
aBorderLine.SetWidth(SvxBorderLineWidth::Hairline);
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::TOP);
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::BOTTOM);
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::LEFT);
aBoxItem->SetLine(&aBorderLine, SvxBoxItemLine::RIGHT);
}
else
{
if (aBoxItem->GetTop())
aBoxItem->GetTop()->SetColor(rNewColor);
if (aBoxItem->GetBottom())
aBoxItem->GetBottom()->SetColor(rNewColor);
if (aBoxItem->GetLeft())
aBoxItem->GetLeft()->SetColor(rNewColor);
if (aBoxItem->GetRight())
aBoxItem->GetRight()->SetColor(rNewColor);
}
}
}
break;
}
}
if (bDefault && (aBoxItem->GetTop() || aBoxItem->GetBottom() ||
aBoxItem->GetLeft() || aBoxItem->GetRight()))
{
aBoxItem->SetAllDistances(MIN_BORDER_DIST);
}
aFrameSet.Put( std::move(aBoxItem) );
// Template AutoUpdate
SwFrameFormat* pFormat = rSh.GetSelectedFrameFormat();
if(pFormat && pFormat->IsAutoUpdateOnDirectFormat())
{
rSh.AutoUpdateFrame(pFormat, aFrameSet);
}
else
rSh.SetFlyFrameAttr( aFrameSet );
}
static void lcl_FrameGetMaxLineWidth(const SvxBorderLine* pBorderLine, SvxBorderLine& rBorderLine)
{
if(pBorderLine->GetWidth() > rBorderLine.GetWidth())
rBorderLine.SetWidth(pBorderLine->GetWidth());
rBorderLine.SetBorderLineStyle(pBorderLine->GetBorderLineStyle());
rBorderLine.SetColor(pBorderLine->GetColor());
}
void SwFrameShell::GetLineStyleState(SfxItemSet &rSet)
{
SwWrtShell &rSh = GetShell();
bool bParentCntProt = rSh.IsSelObjProtected( FlyProtectFlags::Content|FlyProtectFlags::Parent ) != FlyProtectFlags::NONE;
if (bParentCntProt)
{
if (rSh.IsFrameSelected())
rSet.DisableItem( SID_FRAME_LINECOLOR );
rSet.DisableItem( SID_ATTR_BORDER );
rSet.DisableItem( SID_FRAME_LINESTYLE );
}
else
{
if (rSh.IsFrameSelected())
{
SfxItemSetFixed<RES_BOX, RES_BOX> aFrameSet( rSh.GetAttrPool() );
rSh.GetFlyFrameAttr(aFrameSet);
const SvxBorderLine* pLine = aFrameSet.Get(RES_BOX).GetTop();
rSet.Put(SvxColorItem(pLine ? pLine->GetColor() : Color(), SID_FRAME_LINECOLOR));
}
}
}
void SwFrameShell::StateInsert(SfxItemSet &rSet)
{
const SelectionType nSel = GetShell().GetSelectionType();
if ( (nSel & SelectionType::Graphic)
|| (nSel & SelectionType::Ole) )
{
rSet.DisableItem(FN_INSERT_FRAME);
}
else if ( GetShell().CursorInsideInputField() )
{
rSet.DisableItem(FN_INSERT_FRAME);
}
}
void SwFrameShell::GetDrawAttrStateTextFrame(SfxItemSet &rSet)
{
SwWrtShell &rSh = GetShell();
if(rSh.IsFrameSelected())
{
rSh.GetFlyFrameAttr(rSet);
}
else
{
SdrView* pSdrView = rSh.GetDrawViewWithValidMarkList();
if(pSdrView)
{
rSet.Put(pSdrView->GetDefaultAttr());
}
}
}
void SwFrameShell::ExecDrawAttrArgsTextFrame(SfxRequest const & rReq)
{
const SfxItemSet* pArgs = rReq.GetArgs();
SwWrtShell& rSh = GetShell();
if(pArgs)
{
if(rSh.IsFrameSelected())
{
rSh.SetFlyFrameAttr(const_cast< SfxItemSet& >(*pArgs));
}
else
{
SdrView* pSdrView = rSh.GetDrawViewWithValidMarkList();
if(pSdrView)
{
pSdrView->SetDefaultAttr(*pArgs, false);
}
}
}
else
{
SfxDispatcher* pDis = rSh.GetView().GetViewFrame().GetDispatcher();
switch(rReq.GetSlot())
{
case SID_ATTR_FILL_STYLE:
case SID_ATTR_FILL_COLOR:
case SID_ATTR_FILL_GRADIENT:
case SID_ATTR_FILL_HATCH:
case SID_ATTR_FILL_BITMAP:
case SID_ATTR_FILL_TRANSPARENCE:
case SID_ATTR_FILL_FLOATTRANSPARENCE:
{
pDis->Execute(SID_ATTRIBUTES_AREA);
break;
}
}
}
}
void SwFrameShell::ExecDrawDlgTextFrame(SfxRequest const & rReq)
{
switch(rReq.GetSlot())
{
case SID_ATTRIBUTES_AREA:
{
SwWrtShell& rSh = GetShell();
if(rSh.IsFrameSelected())
{
SdrModel& rModel = rSh.GetDrawView()->GetModel();
SfxItemSet aNewAttr(rModel.GetItemPool());
// get attributes from FlyFrame
rSh.GetFlyFrameAttr(aNewAttr);
SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
VclPtr<AbstractSvxAreaTabDialog> pDlg(pFact->CreateSvxAreaTabDialog(
GetView().GetFrameWeld(),
&aNewAttr,
&rModel,
false,
false));
pDlg->StartExecuteAsync([pDlg, this](sal_Int32 nResult){
if(nResult == RET_OK)
{
// set attributes at FlyFrame
GetShell().SetFlyFrameAttr(const_cast< SfxItemSet& >(*pDlg->GetOutputItemSet()));
static sal_uInt16 aInval[] =
{
SID_ATTR_FILL_STYLE,
SID_ATTR_FILL_COLOR,
SID_ATTR_FILL_TRANSPARENCE,
SID_ATTR_FILL_FLOATTRANSPARENCE,
0
};
SfxBindings &rBnd = GetView().GetViewFrame().GetBindings();
rBnd.Invalidate(aInval);
rBnd.Update(SID_ATTR_FILL_STYLE);
rBnd.Update(SID_ATTR_FILL_COLOR);
rBnd.Update(SID_ATTR_FILL_TRANSPARENCE);
rBnd.Update(SID_ATTR_FILL_FLOATTRANSPARENCE);
}
pDlg->disposeOnce();
});
}
break;
}
}
}
void SwFrameShell::DisableStateTextFrame(SfxItemSet &rSet)
{
SfxWhichIter aIter(rSet);
sal_uInt16 nWhich(aIter.FirstWhich());
while(nWhich)
{
switch(nWhich)
{
case SID_ATTRIBUTES_AREA:
{
SwWrtShell& rSh = GetShell();
if(!rSh.IsFrameSelected())
{
rSet.DisableItem(nWhich);
}
break;
}
default:
{
rSet.DisableItem(nWhich);
break;
}
}
nWhich = aIter.NextWhich();
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'ExecuteList' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V530 The return value of function 'Execute' is required to be utilized.
↑ V547 Expression '!"wrong dispatcher"' is always false.