/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <memory>
#include <scitems.hxx>
#include <editeng/eeitem.hxx>
#include <svtools/colorcfg.hxx>
#include <editeng/colritem.hxx>
#include <editeng/editview.hxx>
#include <editeng/fhgtitem.hxx>
#include <editeng/brushitem.hxx>
#include <sfx2/bindings.hxx>
#include <sfx2/printer.hxx>
#include <vcl/cursor.hxx>
#include <vcl/settings.hxx>
#include <o3tl/unit_conversion.hxx>
#include <osl/diagnose.h>
#include <tools/UnitConversion.hxx>
#include <LibreOfficeKit/LibreOfficeKitEnums.h>
#include <comphelper/lok.hxx>
#include <sfx2/lokhelper.hxx>
#include <sfx2/lokcomponenthelpers.hxx>
#include <officecfg/Office/Calc.hxx>
#include <svx/svdview.hxx>
#include <svx/svdpagv.hxx>
#include <svx/sdrpagewindow.hxx>
#include <svx/sdr/contact/objectcontactofpageview.hxx>
#include <svx/sdr/contact/viewobjectcontact.hxx>
#include <svx/sdr/contact/viewcontact.hxx>
#include <tabvwsh.hxx>
#include <vcl/lineinfo.hxx>
#include <vcl/sysdata.hxx>
#include <gridwin.hxx>
#include <viewdata.hxx>
#include <output.hxx>
#include <document.hxx>
#include <attrib.hxx>
#include <patattr.hxx>
#include <dbdata.hxx>
#include <notemark.hxx>
#include <dbfunc.hxx>
#include <scmod.hxx>
#include <inputhdl.hxx>
#include <rfindlst.hxx>
#include <hiranges.hxx>
#include <pagedata.hxx>
#include <globstr.hrc>
#include <scresid.hxx>
#include <docsh.hxx>
#include <cbutton.hxx>
#include <invmerge.hxx>
#include <editutil.hxx>
#include <inputopt.hxx>
#include <fillinfo.hxx>
#include <dpcontrol.hxx>
#include <queryparam.hxx>
#include <queryentry.hxx>
#include <markdata.hxx>
#include <sc.hrc>
#include <vcl/virdev.hxx>
#include <svx/sdrpaintwindow.hxx>
#include <drwlayer.hxx>
static void lcl_LimitRect( tools::Rectangle& rRect, const tools::Rectangle& rVisible )
{
if ( rRect.Top() < rVisible.Top()-1 ) rRect.SetTop( rVisible.Top()-1 );
if ( rRect.Bottom() > rVisible.Bottom()+1 ) rRect.SetBottom( rVisible.Bottom()+1 );
// The header row must be drawn also when the inner rectangle is not visible,
// that is why there is no return value anymore.
// When it is far away, then lcl_DrawOneFrame is not even called.
}
static void lcl_DrawOneFrame( vcl::RenderContext* pDev, const tools::Rectangle& rInnerPixel,
const OUString& rTitle, const Color& rColor, bool bTextBelow,
double nPPTX, double nPPTY, const Fraction& rZoomY,
ScDocument& rDoc, ScViewData& rButtonViewData, bool bLayoutRTL )
{
// rButtonViewData is only used to set the button size,
tools::Rectangle aInner = rInnerPixel;
if ( bLayoutRTL )
{
aInner.SetLeft( rInnerPixel.Right() );
aInner.SetRight( rInnerPixel.Left() );
}
tools::Rectangle aVisible( Point(0,0), pDev->GetOutputSizePixel() );
lcl_LimitRect( aInner, aVisible );
tools::Rectangle aOuter = aInner;
tools::Long nHor = static_cast<tools::Long>( SC_SCENARIO_HSPACE * nPPTX );
tools::Long nVer = static_cast<tools::Long>( SC_SCENARIO_VSPACE * nPPTY );
aOuter.AdjustLeft( -nHor );
aOuter.AdjustRight(nHor );
aOuter.AdjustTop( -nVer );
aOuter.AdjustBottom(nVer );
// use ScPatternAttr::GetFont only for font size
vcl::Font aAttrFont;
rDoc.getCellAttributeHelper().getDefaultCellAttribute().fillFontOnly(aAttrFont, pDev, &rZoomY);
// everything else from application font
vcl::Font aAppFont = pDev->GetSettings().GetStyleSettings().GetAppFont();
aAppFont.SetFontSize( aAttrFont.GetFontSize() );
aAppFont.SetAlignment( ALIGN_TOP );
pDev->SetFont( aAppFont );
Size aTextSize( pDev->GetTextWidth( rTitle ), pDev->GetTextHeight() );
if ( bTextBelow )
aOuter.AdjustBottom(aTextSize.Height() );
else
aOuter.AdjustTop( -(aTextSize.Height()) );
pDev->SetLineColor();
pDev->SetFillColor( rColor );
// left, top, right, bottom
pDev->DrawRect( tools::Rectangle( aOuter.Left(), aOuter.Top(), aInner.Left(), aOuter.Bottom() ) );
pDev->DrawRect( tools::Rectangle( aOuter.Left(), aOuter.Top(), aOuter.Right(), aInner.Top() ) );
pDev->DrawRect( tools::Rectangle( aInner.Right(), aOuter.Top(), aOuter.Right(), aOuter.Bottom() ) );
pDev->DrawRect( tools::Rectangle( aOuter.Left(), aInner.Bottom(), aOuter.Right(), aOuter.Bottom() ) );
tools::Long nButtonY = bTextBelow ? aInner.Bottom() : aOuter.Top();
ScDDComboBoxButton aComboButton(pDev);
aComboButton.SetOptSizePixel();
tools::Long nBWidth = tools::Long(aComboButton.GetSizePixel().Width() * rZoomY);
tools::Long nBHeight = nVer + aTextSize.Height() + 1;
Size aButSize( nBWidth, nBHeight );
tools::Long nButtonPos = bLayoutRTL ? aOuter.Left() : aOuter.Right()-nBWidth+1;
aComboButton.Draw( Point(nButtonPos, nButtonY), aButSize );
rButtonViewData.SetScenButSize( aButSize );
tools::Long nTextStart = bLayoutRTL ? aInner.Right() - aTextSize.Width() + 1 : aInner.Left();
bool bWasClip = false;
vcl::Region aOldClip;
bool bClip = ( aTextSize.Width() > aOuter.Right() - nBWidth - aInner.Left() );
if ( bClip )
{
if (pDev->IsClipRegion())
{
bWasClip = true;
aOldClip = pDev->GetActiveClipRegion();
}
tools::Long nClipStartX = bLayoutRTL ? aOuter.Left() + nBWidth : aInner.Left();
tools::Long nClipEndX = bLayoutRTL ? aInner.Right() : aOuter.Right() - nBWidth;
pDev->SetClipRegion( vcl::Region(tools::Rectangle( nClipStartX, nButtonY + nVer/2,
nClipEndX, nButtonY + nVer/2 + aTextSize.Height())) );
}
pDev->DrawText( Point( nTextStart, nButtonY + nVer/2 ), rTitle );
if ( bClip )
{
if ( bWasClip )
pDev->SetClipRegion(aOldClip);
else
pDev->SetClipRegion();
}
pDev->SetFillColor();
pDev->SetLineColor( COL_BLACK );
pDev->DrawRect( aInner );
pDev->DrawRect( aOuter );
}
static void lcl_DrawScenarioFrames( OutputDevice* pDev, ScViewData& rViewData, ScSplitPos eWhich,
SCCOL nX1, SCROW nY1, SCCOL nX2, SCROW nY2 )
{
ScDocument& rDoc = rViewData.GetDocument();
SCTAB nTab = rViewData.GetTabNo();
SCTAB nTabCount = rDoc.GetTableCount();
if ( nTab+1 >= nTabCount || !rDoc.IsScenario(nTab+1) || rDoc.IsScenario(nTab) )
return;
if ( nX1 > 0 ) --nX1;
if ( nY1>=2 ) nY1 -= 2; // Hack: Header row affects two cells
else if ( nY1 > 0 ) --nY1;
if ( nX2 < rDoc.MaxCol() ) ++nX2;
if ( nY2 < rDoc.MaxRow()-1 ) nY2 += 2; // Hack: Header row affects two cells
else if ( nY2 < rDoc.MaxRow() ) ++nY2;
ScRange aViewRange( nX1,nY1,nTab, nX2,nY2,nTab );
//! cache the ranges in table!!!!
ScMarkData aMarks(rDoc.GetSheetLimits());
for (SCTAB i=nTab+1; i<nTabCount && rDoc.IsScenario(i); i++)
rDoc.MarkScenario( i, nTab, aMarks, false, ScScenarioFlags::ShowFrame );
ScRangeListRef xRanges = new ScRangeList;
aMarks.FillRangeListWithMarks( xRanges.get(), false );
bool bLayoutRTL = rDoc.IsLayoutRTL( nTab );
tools::Long nLayoutSign = bLayoutRTL ? -1 : 1;
for (size_t j = 0, n = xRanges->size(); j < n; ++j)
{
ScRange aRange = (*xRanges)[j];
// Always extend scenario frame to merged cells where no new non-covered cells
// are framed
rDoc.ExtendTotalMerge( aRange );
//! -> Extend repaint when merging !!!
if ( aRange.Intersects( aViewRange ) ) //! Space for Text/Button?
{
Point aStartPos = rViewData.GetScrPos(
aRange.aStart.Col(), aRange.aStart.Row(), eWhich, true );
Point aEndPos = rViewData.GetScrPos(
aRange.aEnd.Col()+1, aRange.aEnd.Row()+1, eWhich, true );
// on the grid:
aStartPos.AdjustX( -nLayoutSign );
aStartPos.AdjustY( -1 );
aEndPos.AdjustX( -nLayoutSign );
aEndPos.AdjustY( -1 );
bool bTextBelow = ( aRange.aStart.Row() == 0 );
OUString aCurrent;
Color aColor( COL_LIGHTGRAY );
for (SCTAB nAct=nTab+1; nAct<nTabCount && rDoc.IsScenario(nAct); nAct++)
if ( rDoc.IsActiveScenario(nAct) && rDoc.HasScenarioRange(nAct,aRange) )
{
OUString aDummyComment;
ScScenarioFlags nDummyFlags;
rDoc.GetName( nAct, aCurrent );
rDoc.GetScenarioData( nAct, aDummyComment, aColor, nDummyFlags );
}
if (aCurrent.isEmpty())
aCurrent = ScResId( STR_EMPTYDATA );
//! Own text "(None)" instead of "(Empty)" ???
lcl_DrawOneFrame( pDev, tools::Rectangle( aStartPos, aEndPos ),
aCurrent, aColor, bTextBelow,
rViewData.GetPPTX(), rViewData.GetPPTY(), rViewData.GetZoomY(),
rDoc, rViewData, bLayoutRTL );
}
}
}
static void lcl_DrawHighlight( ScOutputData& rOutputData, const ScViewData& rViewData,
const std::vector<ScHighlightEntry>& rHighlightRanges )
{
SCTAB nTab = rViewData.GetTabNo();
for ( const auto& rHighlightRange : rHighlightRanges)
{
ScRange aRange = rHighlightRange.aRef;
if ( nTab >= aRange.aStart.Tab() && nTab <= aRange.aEnd.Tab() )
{
rOutputData.DrawRefMark(
aRange.aStart.Col(), aRange.aStart.Row(),
aRange.aEnd.Col(), aRange.aEnd.Row(),
rHighlightRange.aColor, false );
}
}
}
void ScGridWindow::DoInvertRect( const tools::Rectangle& rPixel )
{
if ( rPixel == aInvertRect )
aInvertRect = tools::Rectangle(); // Cancel
else
{
OSL_ENSURE( aInvertRect.IsEmpty(), "DoInvertRect no pairs" );
aInvertRect = rPixel; // Mark new rectangle
}
UpdateHeaderOverlay(); // uses aInvertRect
}
void ScGridWindow::PrePaint(vcl::RenderContext& /*rRenderContext*/)
{
// forward PrePaint to DrawingLayer
ScTabViewShell* pTabViewShell = mrViewData.GetViewShell();
if(pTabViewShell)
{
SdrView* pDrawView = pTabViewShell->GetScDrawView();
if (pDrawView)
{
pDrawView->PrePaint();
}
}
}
bool ScGridWindow::NeedLOKCursorInvalidation(const tools::Rectangle& rCursorRect,
const Fraction aScaleX, const Fraction aScaleY)
{
// Don't see the need for a map as there will be only a few zoom levels
// and as of now X and Y zooms in online are the same.
for (auto& rEntry : maLOKLastCursor)
{
if (aScaleX == rEntry.aScaleX && aScaleY == rEntry.aScaleY)
{
if (rCursorRect == rEntry.aRect)
return false; // No change
// Update and allow invalidate.
rEntry.aRect = rCursorRect;
return true;
}
}
maLOKLastCursor.push_back(LOKCursorEntry{aScaleX, aScaleY, rCursorRect});
return true;
}
void ScGridWindow::InvalidateLOKViewCursor(const tools::Rectangle& rCursorRect,
const Fraction aScaleX, const Fraction aScaleY)
{
if (!NeedLOKCursorInvalidation(rCursorRect, aScaleX, aScaleY))
return;
ScTabViewShell* pThisViewShell = mrViewData.GetViewShell();
SfxViewShell* pViewShell = SfxViewShell::GetFirst();
while (pViewShell)
{
if (pViewShell != pThisViewShell && pViewShell->GetDocId() == pThisViewShell->GetDocId())
{
ScTabViewShell* pOtherViewShell = dynamic_cast<ScTabViewShell*>(pViewShell);
if (pOtherViewShell)
{
ScViewData& rOtherViewData = pOtherViewShell->GetViewData();
Fraction aZoomX = rOtherViewData.GetZoomX();
Fraction aZoomY = rOtherViewData.GetZoomY();
if (aZoomX == aScaleX && aZoomY == aScaleY)
{
SfxLokHelper::notifyOtherView(pThisViewShell, pOtherViewShell,
LOK_CALLBACK_INVALIDATE_VIEW_CURSOR, "rectangle", rCursorRect.toString());
}
}
}
pViewShell = SfxViewShell::GetNext(*pViewShell);
}
}
void ScGridWindow::Paint( vcl::RenderContext& /*rRenderContext*/, const tools::Rectangle& rRect )
{
ScDocument& rDoc = mrViewData.GetDocument();
if ( rDoc.IsInInterpreter() )
{
// Via Reschedule, interpreted cells do not trigger Invalidate again,
// otherwise for instance an error box would never appear (bug 36381).
// Later, through bNeedsRepaint everything is painted again.
if ( bNeedsRepaint )
{
//! Merge Rectangle?
aRepaintPixel = tools::Rectangle(); // multiple -> paint all
}
else
{
bNeedsRepaint = true;
aRepaintPixel = LogicToPixel(rRect); // only affected ranges
}
return;
}
// #i117893# If GetSizePixel needs to call the resize handler, the resulting nested Paint call
// (possibly for a larger rectangle) has to be allowed. Call GetSizePixel before setting bIsInPaint.
GetSizePixel();
if (bIsInPaint)
return;
bIsInPaint = true;
tools::Rectangle aPixRect = LogicToPixel( rRect );
SCCOL nX1 = mrViewData.GetPosX(eHWhich);
SCROW nY1 = mrViewData.GetPosY(eVWhich);
SCTAB nTab = mrViewData.GetTabNo();
double nPPTX = mrViewData.GetPPTX();
double nPPTY = mrViewData.GetPPTY();
tools::Rectangle aMirroredPixel = aPixRect;
if ( rDoc.IsLayoutRTL( nTab ) )
{
// mirror and swap
tools::Long nWidth = GetSizePixel().Width();
aMirroredPixel.SetLeft( nWidth - 1 - aPixRect.Right() );
aMirroredPixel.SetRight( nWidth - 1 - aPixRect.Left() );
}
tools::Long nScrX = ScViewData::ToPixel( rDoc.GetColWidth( nX1, nTab ), nPPTX );
while ( nScrX <= aMirroredPixel.Left() && nX1 < rDoc.MaxCol() )
{
++nX1;
nScrX += ScViewData::ToPixel( rDoc.GetColWidth( nX1, nTab ), nPPTX );
}
SCCOL nX2 = nX1;
while ( nScrX <= aMirroredPixel.Right() && nX2 < rDoc.MaxCol() )
{
++nX2;
nScrX += ScViewData::ToPixel( rDoc.GetColWidth( nX2, nTab ), nPPTX );
}
tools::Long nScrY = 0;
ScViewData::AddPixelsWhile( nScrY, aPixRect.Top(), nY1, rDoc.MaxRow(), nPPTY, &rDoc, nTab);
SCROW nY2 = nY1;
if (nScrY <= aPixRect.Bottom() && nY2 < rDoc.MaxRow())
{
++nY2;
ScViewData::AddPixelsWhile( nScrY, aPixRect.Bottom(), nY2, rDoc.MaxRow(), nPPTY, &rDoc, nTab);
}
Draw( nX1,nY1,nX2,nY2, ScUpdateMode::Marks ); // don't continue with painting
bIsInPaint = false;
}
void ScGridWindow::Resize()
{
// tdf#159348 update highlight overlay when window is resized
if (officecfg::Office::Calc::Content::Display::ColumnRowHighlighting::get())
UpdateHighlightOverlay();
}
void ScGridWindow::Draw( SCCOL nX1, SCROW nY1, SCCOL nX2, SCROW nY2, ScUpdateMode eMode )
{
ScDocument& rDoc = mrViewData.GetDocument();
// let's ignore the normal Draw() attempts when doing the tiled rendering,
// all the rendering should go through PaintTile() in that case.
// TODO revisit if we can actually turn this into an assert(), and clean
// up the callers
if (comphelper::LibreOfficeKit::isActive())
return;
ScModule* pScMod = SC_MOD();
bool bTextWysiwyg = pScMod->GetInputOptions().GetTextWysiwyg();
if (mrViewData.IsMinimized())
return;
PutInOrder( nX1, nX2 );
PutInOrder( nY1, nY2 );
OSL_ENSURE( rDoc.ValidCol(nX2) && rDoc.ValidRow(nY2), "GridWin Draw area too big" );
UpdateVisibleRange();
if (nX2 < maVisibleRange.mnCol1 || nY2 < maVisibleRange.mnRow1)
return;
// invisible
if (nX1 < maVisibleRange.mnCol1)
nX1 = maVisibleRange.mnCol1;
if (nY1 < maVisibleRange.mnRow1)
nY1 = maVisibleRange.mnRow1;
if (nX1 > maVisibleRange.mnCol2 || nY1 > maVisibleRange.mnRow2)
return;
if (nX2 > maVisibleRange.mnCol2)
nX2 = maVisibleRange.mnCol2;
if (nY2 > maVisibleRange.mnRow2)
nY2 = maVisibleRange.mnRow2;
if ( eMode != ScUpdateMode::Marks && nX2 < maVisibleRange.mnCol2)
nX2 = maVisibleRange.mnCol2; // to continue painting
// point of no return
++nPaintCount; // mark that painting is in progress
SCTAB nTab = mrViewData.GetTabNo();
rDoc.ExtendHidden( nX1, nY1, nX2, nY2, nTab );
Point aScrPos = mrViewData.GetScrPos( nX1, nY1, eWhich );
tools::Long nMirrorWidth = GetSizePixel().Width();
bool bLayoutRTL = rDoc.IsLayoutRTL( nTab );
if ( bLayoutRTL )
{
tools::Long nEndPixel = mrViewData.GetScrPos( nX2+1, maVisibleRange.mnRow1, eWhich ).X();
nMirrorWidth = aScrPos.X() - nEndPixel;
aScrPos.setX( nEndPixel + 1 );
}
tools::Long nScrX = aScrPos.X();
tools::Long nScrY = aScrPos.Y();
SCCOL nCurX = mrViewData.GetCurX();
SCROW nCurY = mrViewData.GetCurY();
SCCOL nCurEndX = nCurX;
SCROW nCurEndY = nCurY;
rDoc.ExtendMerge( nCurX, nCurY, nCurEndX, nCurEndY, nTab );
bool bCurVis = nCursorHideCount==0 &&
( nCurEndX+1 >= nX1 && nCurX <= nX2+1 && nCurEndY+1 >= nY1 && nCurY <= nY2+1 );
// AutoFill Handles
if ( !bCurVis && nCursorHideCount==0 && bAutoMarkVisible && aAutoMarkPos.Tab() == nTab &&
( aAutoMarkPos.Col() != nCurX || aAutoMarkPos.Row() != nCurY ) )
{
SCCOL nHdlX = aAutoMarkPos.Col();
SCROW nHdlY = aAutoMarkPos.Row();
rDoc.ExtendMerge( nHdlX, nHdlY, nHdlX, nHdlY, nTab );
// left and top is unaffected
//! Paint AutoFill handles alone (without Cursor) ???
}
double nPPTX = mrViewData.GetPPTX();
double nPPTY = mrViewData.GetPPTY();
const ScViewOptions& rOpts = mrViewData.GetOptions();
// data block
ScTableInfo aTabInfo(nY1, nY2, true);
rDoc.FillInfo( aTabInfo, nX1, nY1, nX2, nY2, nTab,
nPPTX, nPPTY, false, rOpts.GetOption(VOPT_FORMULAS),
&mrViewData.GetMarkData() );
Fraction aZoomX = mrViewData.GetZoomX();
Fraction aZoomY = mrViewData.GetZoomY();
ScOutputData aOutputData( GetOutDev(), OUTTYPE_WINDOW, aTabInfo, &rDoc, nTab,
nScrX, nScrY, nX1, nY1, nX2, nY2, nPPTX, nPPTY,
&aZoomX, &aZoomY );
aOutputData.SetMirrorWidth( nMirrorWidth ); // needed for RTL
aOutputData.SetSpellCheckContext(mpSpellCheckCxt.get());
ScopedVclPtr< VirtualDevice > xFmtVirtDev;
bool bLogicText = bTextWysiwyg; // call DrawStrings in logic MapMode?
if ( bTextWysiwyg )
{
// use printer for text formatting
OutputDevice* pFmtDev = rDoc.GetPrinter();
pFmtDev->SetMapMode( mrViewData.GetLogicMode(eWhich) );
aOutputData.SetFmtDevice( pFmtDev );
}
else if ( aZoomX != aZoomY && mrViewData.IsOle() )
{
// #i45033# For OLE inplace editing with different zoom factors,
// use a virtual device with 1/100th mm as text formatting reference
xFmtVirtDev.disposeAndReset( VclPtr<VirtualDevice>::Create() );
xFmtVirtDev->SetMapMode(MapMode(MapUnit::Map100thMM));
aOutputData.SetFmtDevice( xFmtVirtDev.get() );
bLogicText = true; // use logic MapMode
}
DrawContent(*GetOutDev(), aTabInfo, aOutputData, bLogicText);
// If something was inverted during the Paint (selection changed from Basic Macro)
// then this is now mixed up and has to be repainted
OSL_ENSURE(nPaintCount, "Wrong nPaintCount");
--nPaintCount;
if (!nPaintCount)
CheckNeedsRepaint();
// Flag drawn formula cells "unchanged".
rDoc.ResetChanged(ScRange(nX1, nY1, nTab, nX2, nY2, nTab));
rDoc.PrepareFormulaCalc();
}
namespace {
class SuppressEditViewMessagesGuard
{
public:
SuppressEditViewMessagesGuard(EditView& rEditView) :
mrEditView(rEditView),
mbOrigSuppressFlag(rEditView.IsSuppressLOKMessages())
{
if (!mbOrigSuppressFlag)
mrEditView.SuppressLOKMessages(true);
}
~SuppressEditViewMessagesGuard()
{
if (mrEditView.IsSuppressLOKMessages() != mbOrigSuppressFlag)
mrEditView.SuppressLOKMessages(mbOrigSuppressFlag);
}
private:
EditView& mrEditView;
const bool mbOrigSuppressFlag;
};
}
/**
* Used to store the necessary information about the (combined-)tile
* area relevant to coordinate transformations in RTL mode.
*/
class ScLokRTLContext
{
public:
ScLokRTLContext(const ScOutputData& rOutputData, const tools::Long nTileDeviceOriginPixelX):
mrOutputData(rOutputData),
mnTileDevOriginX(nTileDeviceOriginPixelX)
{}
/**
* Converts from document x pixel position to the
* corresponding pixel position w.r.t the tile device origin.
*/
tools::Long docToTilePos(tools::Long nPosX) const
{
tools::Long nMirrorX = (-2 * mnTileDevOriginX) + mrOutputData.GetScrW();
return nMirrorX - 1 - nPosX;
}
private:
const ScOutputData& mrOutputData;
const tools::Long mnTileDevOriginX;
};
namespace
{
tools::Rectangle lcl_negateRectX(const tools::Rectangle& rRect)
{
return {-rRect.Right(), rRect.Top(), -rRect.Left(), rRect.Bottom()};
}
tools::Long GetSide(const tools::Rectangle& rRect, int i)
{
static decltype(&tools::Rectangle::Left) GetSides[4] = {
&tools::Rectangle::Left, &tools::Rectangle::Top,
&tools::Rectangle::Right, &tools::Rectangle::Bottom
};
return (rRect.*GetSides[i])();
}
Fraction GetZoom(const ScViewData& rViewData, int i)
{
static decltype(&ScViewData::GetZoomX) GetZooms[4] = {
&ScViewData::GetZoomX, &ScViewData::GetZoomY,
&ScViewData::GetZoomX, &ScViewData::GetZoomY
};
return (rViewData.*GetZooms[i])();
}
}
void ScGridWindow::DrawEditView(OutputDevice &rDevice, EditView *pEditView)
{
SCCOL nCol1 = mrViewData.GetEditStartCol();
SCROW nRow1 = mrViewData.GetEditStartRow();
SCCOL nCol2 = mrViewData.GetEditEndCol();
SCROW nRow2 = mrViewData.GetEditEndRow();
rDevice.SetLineColor();
rDevice.SetFillColor(pEditView->GetBackgroundColor());
Point aStart = mrViewData.GetScrPos( nCol1, nRow1, eWhich );
Point aEnd = mrViewData.GetScrPos( nCol2+1, nRow2+1, eWhich );
// don't overwrite grid
bool bLayoutRTL = mrViewData.GetDocument().IsLayoutRTL(mrViewData.GetTabNo());
tools::Long nLayoutSign = bLayoutRTL ? -1 : 1;
aEnd.AdjustX( -(2 * nLayoutSign) );
aEnd.AdjustY( -2 );
// set the correct mapmode
tools::Rectangle aBackground(aStart, aEnd);
// paint the background
rDevice.SetMapMode(mrViewData.GetLogicMode());
tools::Rectangle aLogicRect(rDevice.PixelToLogic(aBackground));
//tdf#100925, rhbz#1283420, Draw some text here, to get
//X11CairoTextRender::getCairoContext called, so that the forced read
//from the underlying X Drawable gets it to sync.
rDevice.DrawText(aLogicRect.BottomLeft(), u" "_ustr);
rDevice.DrawRect(aLogicRect);
// paint the editeng text
pEditView->Paint(rDevice.PixelToLogic(aEditRectangle), &rDevice);
rDevice.SetMapMode(MapMode(MapUnit::MapPixel));
}
void ScGridWindow::DrawContent(OutputDevice &rDevice, const ScTableInfo& rTableInfo, ScOutputData& aOutputData,
bool bLogicText)
{
ScModule* pScMod = SC_MOD();
ScDocument& rDoc = mrViewData.GetDocument();
const ScViewOptions& rOpts = mrViewData.GetOptions();
bool bIsTiledRendering = comphelper::LibreOfficeKit::isActive();
bool bNoBackgroundAndGrid = bIsTiledRendering
&& comphelper::LibreOfficeKit::isCompatFlagSet(
comphelper::LibreOfficeKit::Compat::scNoGridBackground);
SCTAB nTab = aOutputData.nTab;
SCCOL nX1 = aOutputData.nX1;
SCROW nY1 = aOutputData.nY1;
SCCOL nX2 = aOutputData.nX2;
SCROW nY2 = aOutputData.nY2;
tools::Long nScrX = aOutputData.nScrX;
tools::Long nScrY = aOutputData.nScrY;
const svtools::ColorConfig& rColorCfg = pScMod->GetColorConfig();
Color aGridColor( rColorCfg.GetColorValue( svtools::CALCGRID ).nColor );
if ( aGridColor == COL_TRANSPARENT )
{
// use view options' grid color only if color config has "automatic" color
aGridColor = rOpts.GetGridColor();
}
ScTabViewShell* pCurTabViewShell = mrViewData.GetViewShell();
aOutputData.SetSyntaxMode ( mrViewData.IsSyntaxMode() );
aOutputData.SetGridColor ( aGridColor );
aOutputData.SetShowNullValues ( rOpts.GetOption( VOPT_NULLVALS ) );
aOutputData.SetShowFormulas ( rOpts.GetOption( VOPT_FORMULAS ) );
aOutputData.SetShowSpellErrors ( pCurTabViewShell && pCurTabViewShell->IsAutoSpell() );
aOutputData.SetMarkClipped ( SC_MOD()->GetColorConfig().GetColorValue(svtools::CALCTEXTOVERFLOW).bIsVisible );
aOutputData.SetUseStyleColor( true ); // always set in table view
aOutputData.SetViewShell(pCurTabViewShell);
bool bGrid = rOpts.GetOption( VOPT_GRID ) && mrViewData.GetShowGrid();
bool bGridFirst = !rOpts.GetOption( VOPT_GRID_ONTOP );
bool bPage = rOpts.GetOption( VOPT_PAGEBREAKS ) && !bIsTiledRendering;
bool bPageMode = mrViewData.IsPagebreakMode();
if (bPageMode) // after FindChanged
{
// SetPagebreakMode also initializes bPrinted Flags
aOutputData.SetPagebreakMode( mrViewData.GetView()->GetPageBreakData() );
}
EditView* pEditView = nullptr;
bool bEditMode = mrViewData.HasEditView(eWhich);
if ( bEditMode && mrViewData.GetRefTabNo() == nTab )
{
SCCOL nEditCol;
SCROW nEditRow;
mrViewData.GetEditView( eWhich, pEditView, nEditCol, nEditRow );
SCCOL nEditEndCol = mrViewData.GetEditEndCol();
SCROW nEditEndRow = mrViewData.GetEditEndRow();
if (officecfg::Office::Calc::Content::Display::EditCellBackgroundHighlighting::get())
{
Color aDocColor = SC_MOD()->GetColorConfig().GetColorValue(svtools::DOCCOLOR).nColor;
if (!getViewData().GetMarkData().IsMarked() && mrViewData.GetEditHighlight())
{
Color aHighlightColor = SC_MOD()->GetColorConfig().GetColorValue(svtools::CALCCELLFOCUS).nColor;
aHighlightColor.Merge(aDocColor, 100);
aDocColor = aHighlightColor;
}
Color aBackColor = rDoc.GetPattern(nEditCol, nEditRow, getViewData().GetTabNo())->GetItem(ATTR_BACKGROUND).GetColor();
if (!aBackColor.IsTransparent())
aDocColor = aBackColor;
pEditView->SetBackgroundColor(aDocColor);
}
if ( nEditEndCol >= nX1 && nEditCol <= nX2 && nEditEndRow >= nY1 && nEditRow <= nY2 )
aOutputData.SetEditCell( nEditCol, nEditRow );
else
bEditMode = false;
}
const MapMode aOriginalMode = rDevice.GetMapMode();
// define drawing layer map mode and paint rectangle
MapMode aDrawMode = GetDrawMapMode();
if (bIsTiledRendering)
{
// FIXME this shouldn't be necessary once we change the entire Calc to
// work in the logic coordinates (ideally 100ths of mm - so that it is
// the same as editeng and drawinglayer), and get rid of all the
// SetMapMode's and other unnecessary fun we have with pixels
// See also ScGridWindow::GetDrawMapMode() for the rest of this hack
aDrawMode.SetOrigin(PixelToLogic(Point(nScrX, nScrY), aDrawMode));
}
tools::Rectangle aDrawingRectLogic;
bool bLayoutRTL = rDoc.IsLayoutRTL( nTab );
bool bLokRTL = bLayoutRTL && bIsTiledRendering;
std::unique_ptr<ScLokRTLContext> pLokRTLCtxt(
bLokRTL ?
new ScLokRTLContext(aOutputData, o3tl::convert(aOriginalMode.GetOrigin().X(), o3tl::Length::twip, o3tl::Length::px)) :
nullptr);
{
// get drawing pixel rect
tools::Rectangle aDrawingRectPixel(
bLokRTL ? Point(-(nScrX + aOutputData.GetScrW()), nScrY) : Point(nScrX, nScrY),
Size(aOutputData.GetScrW(), aOutputData.GetScrH()));
// correct for border (left/right)
if(rDoc.MaxCol() == nX2 && !bLokRTL)
{
if(bLayoutRTL)
{
aDrawingRectPixel.SetLeft( 0 );
}
else
{
aDrawingRectPixel.SetRight( GetOutputSizePixel().getWidth() );
}
}
// correct for border (bottom)
if(rDoc.MaxRow() == nY2)
{
aDrawingRectPixel.SetBottom( GetOutputSizePixel().getHeight() );
}
// get logic positions
aDrawingRectLogic = PixelToLogic(aDrawingRectPixel, aDrawMode);
}
bool bInPlaceEditing = bEditMode && (mrViewData.GetRefTabNo() == mrViewData.GetTabNo());
vcl::Cursor* pInPlaceCrsr = nullptr;
bool bInPlaceVisCursor = false;
if (bInPlaceEditing)
{
// toggle the cursor off if it's on to ensure the cursor invert
// background logic remains valid after the background is cleared on
// the next cursor flash
pInPlaceCrsr = pEditView->GetCursor();
bInPlaceVisCursor = pInPlaceCrsr && pInPlaceCrsr->IsVisible();
if (bInPlaceVisCursor)
pInPlaceCrsr->Hide();
}
OutputDevice* pContentDev = &rDevice; // device for document content, used by overlay manager
SdrPaintWindow* pTargetPaintWindow = nullptr; // #i74769# work with SdrPaintWindow directly
{
// init redraw
if (pCurTabViewShell)
{
MapMode aCurrentMapMode(pContentDev->GetMapMode());
pContentDev->SetMapMode(aDrawMode);
SdrView* pDrawView = pCurTabViewShell->GetScDrawView();
if(pDrawView)
{
// #i74769# Use new BeginDrawLayers() interface
vcl::Region aDrawingRegion(aDrawingRectLogic);
pTargetPaintWindow = pDrawView->BeginDrawLayers(pContentDev, aDrawingRegion);
OSL_ENSURE(pTargetPaintWindow, "BeginDrawLayers: Got no SdrPaintWindow (!)");
if (!bIsTiledRendering)
{
// #i74769# get target device from SdrPaintWindow, this may be the prerender
// device now, too.
pContentDev = &(pTargetPaintWindow->GetTargetOutputDevice());
aOutputData.SetContentDevice(pContentDev);
}
}
pContentDev->SetMapMode(aCurrentMapMode);
}
}
// app-background / document edge (area) (Pixel)
if ( !bIsTiledRendering && ( nX2 == rDoc.MaxCol() || nY2 == rDoc.MaxRow() ) )
{
// save MapMode and set to pixel
MapMode aCurrentMapMode(pContentDev->GetMapMode());
pContentDev->SetMapMode(MapMode(MapUnit::MapPixel));
tools::Rectangle aPixRect( Point(), GetOutputSizePixel() );
pContentDev->SetFillColor( rColorCfg.GetColorValue(svtools::APPBACKGROUND).nColor );
pContentDev->SetLineColor();
if ( nX2==rDoc.MaxCol() )
{
tools::Rectangle aDrawRect( aPixRect );
if ( bLayoutRTL )
aDrawRect.SetRight( nScrX - 1 );
else
aDrawRect.SetLeft( nScrX + aOutputData.GetScrW() );
if (aDrawRect.Right() >= aDrawRect.Left())
pContentDev->DrawRect( aDrawRect );
}
if ( nY2==rDoc.MaxRow() )
{
tools::Rectangle aDrawRect( aPixRect );
aDrawRect.SetTop( nScrY + aOutputData.GetScrH() );
if ( nX2==rDoc.MaxCol() )
{
// no double painting of the corner
if ( bLayoutRTL )
aDrawRect.SetLeft( nScrX );
else
aDrawRect.SetRight( nScrX + aOutputData.GetScrW() - 1 );
}
if (aDrawRect.Bottom() >= aDrawRect.Top())
pContentDev->DrawRect( aDrawRect );
}
// restore MapMode
pContentDev->SetMapMode(aCurrentMapMode);
}
if ( rDoc.HasBackgroundDraw( nTab, aDrawingRectLogic ) )
{
pContentDev->SetMapMode(MapMode(MapUnit::MapPixel));
aOutputData.DrawClear();
// drawing background
pContentDev->SetMapMode(aDrawMode);
DrawRedraw( aOutputData, SC_LAYER_BACK );
}
else
aOutputData.SetSolidBackground(!bNoBackgroundAndGrid);
aOutputData.DrawDocumentBackground();
if (bGridFirst && (bGrid || bPage))
{
// Draw lines in background color cover over lok client grid lines in merged cell areas if bNoBackgroundAndGrid is set.
if (bNoBackgroundAndGrid)
aOutputData.DrawGrid(*pContentDev, false /* bGrid */, false /* bPage */, true /* bMergeCover */);
else
aOutputData.DrawGrid(*pContentDev, bGrid, bPage);
}
aOutputData.DrawBackground(*pContentDev);
if (!bGridFirst && (bGrid || bPage) && !bNoBackgroundAndGrid)
aOutputData.DrawGrid(*pContentDev, bGrid, bPage);
pContentDev->SetMapMode(MapMode(MapUnit::MapPixel));
//tdf#128258 - draw a dotted line before hidden columns/rows
DrawHiddenIndicator(nX1,nY1,nX2,nY2, *pContentDev);
if ( bPageMode )
{
// DrawPagePreview draws complete lines/page numbers, must always be clipped
if ( aOutputData.SetChangedClip() )
{
DrawPagePreview(nX1,nY1,nX2,nY2, *pContentDev);
pContentDev->SetClipRegion();
}
}
aOutputData.DrawShadow();
aOutputData.DrawFrame(*pContentDev);
aOutputData.DrawSparklines(*pContentDev);
// Show Note Mark
if ( rOpts.GetOption( VOPT_NOTES ) )
aOutputData.DrawNoteMarks(*pContentDev);
if ( rOpts.GetOption( VOPT_FORMULAS_MARKS ) )
aOutputData.DrawFormulaMarks(*pContentDev);
if ( !bLogicText )
aOutputData.DrawStrings(); // in pixel MapMode
// edit cells and printer-metrics text must be before the buttons
// (DataPilot buttons contain labels in UI font)
pContentDev->SetMapMode(mrViewData.GetLogicMode(eWhich));
if ( bLogicText )
aOutputData.DrawStrings(true); // in logic MapMode if bLogicText is set
aOutputData.DrawEdit(true);
// the buttons are painted in absolute coordinates
if (bIsTiledRendering)
{
// Tiled offset nScrX, nScrY
MapMode aMap( MapUnit::MapPixel );
Point aOrigin(o3tl::convert(aOriginalMode.GetOrigin(), o3tl::Length::twip, o3tl::Length::px));
aOrigin.Move(nScrX, nScrY);
aMap.SetOrigin(aOrigin);
pContentDev->SetMapMode(aMap);
}
else
pContentDev->SetMapMode(MapMode(MapUnit::MapPixel));
// Autofilter- and Pivot-Buttons
DrawButtons(nX1, nX2, rTableInfo, pContentDev, pLokRTLCtxt.get()); // Pixel
pContentDev->SetMapMode(MapMode(MapUnit::MapPixel));
aOutputData.DrawClipMarks();
// In any case, Scenario / ChangeTracking must happen after DrawGrid, also for !bGridFirst
//! test if ChangeTrack display is active
//! Disable scenario frame via view option?
SCTAB nTabCount = rDoc.GetTableCount();
const std::vector<ScHighlightEntry> &rHigh = mrViewData.GetView()->GetHighlightRanges();
bool bHasScenario = ( nTab+1<nTabCount && rDoc.IsScenario(nTab+1) && !rDoc.IsScenario(nTab) );
bool bHasChange = ( rDoc.GetChangeTrack() != nullptr );
if ( bHasChange || bHasScenario || !rHigh.empty() )
{
//! Merge SetChangedClip() with DrawMarks() ?? (different MapMode!)
if ( bHasChange )
aOutputData.DrawChangeTrack();
if ( bHasScenario )
lcl_DrawScenarioFrames( pContentDev, mrViewData, eWhich, nX1,nY1,nX2,nY2 );
lcl_DrawHighlight( aOutputData, mrViewData, rHigh );
}
// Drawing foreground
pContentDev->SetMapMode(aDrawMode);
// Bitmaps and buttons are in absolute pixel coordinates.
const MapMode aOrig = pContentDev->GetMapMode();
if (bIsTiledRendering)
{
Point aOrigin(o3tl::convert(aOriginalMode.GetOrigin(), o3tl::Length::twip, o3tl::Length::px));
tools::Long nXOffset = bLayoutRTL ? -aOrigin.getX() + aOutputData.GetScrW()
: aOrigin.getX();
Size aPixelOffset(nXOffset, aOrigin.getY());
pContentDev->SetPixelOffset(aPixelOffset);
comphelper::LibreOfficeKit::setLocalRendering();
}
DrawRedraw( aOutputData, SC_LAYER_FRONT );
DrawRedraw( aOutputData, SC_LAYER_INTERN );
DrawSdrGrid( aDrawingRectLogic, pContentDev );
if (bIsTiledRendering)
{
pContentDev->SetPixelOffset(Size());
pContentDev->SetMapMode(aOrig);
}
pContentDev->SetMapMode(MapMode(MapUnit::MapPixel));
if ( mrViewData.IsRefMode() && nTab >= mrViewData.GetRefStartZ() && nTab <= mrViewData.GetRefEndZ() )
{
Color aRefColor( rColorCfg.GetColorValue(svtools::CALCREFERENCE).nColor );
aOutputData.DrawRefMark( mrViewData.GetRefStartX(), mrViewData.GetRefStartY(),
mrViewData.GetRefEndX(), mrViewData.GetRefEndY(),
aRefColor, false );
}
// range finder
ScInputHandler* pHdl = pScMod->GetInputHdl( mrViewData.GetViewShell() );
if (pHdl)
{
ScDocShell* pDocSh = mrViewData.GetDocShell();
ScRangeFindList* pRangeFinder = pHdl->GetRangeFindList();
if ( pRangeFinder && !pRangeFinder->IsHidden() &&
pRangeFinder->GetDocName() == pDocSh->GetTitle() )
{
sal_uInt16 nCount = static_cast<sal_uInt16>(pRangeFinder->Count());
for (sal_uInt16 i=0; i<nCount; i++)
{
ScRangeFindData& rData = pRangeFinder->GetObject(i);
ScRange aRef = rData.aRef;
aRef.PutInOrder();
if ( aRef.aStart.Tab() >= nTab && aRef.aEnd.Tab() <= nTab )
aOutputData.DrawRefMark( aRef.aStart.Col(), aRef.aStart.Row(),
aRef.aEnd.Col(), aRef.aEnd.Row(),
rData.nColor,
true );
}
}
}
{
// end redraw
if (pCurTabViewShell)
{
MapMode aCurrentMapMode(pContentDev->GetMapMode());
pContentDev->SetMapMode(aDrawMode);
if (bIsTiledRendering)
{
Point aOrigin = aOriginalMode.GetOrigin();
if (bLayoutRTL)
aOrigin.setX(-aOrigin.getX()
+ o3tl::toTwips(aOutputData.nScrX + aOutputData.GetScrW(), o3tl::Length::px));
else
aOrigin.AdjustX(o3tl::toTwips(aOutputData.nScrX, o3tl::Length::px));
aOrigin.AdjustY(o3tl::toTwips(aOutputData.nScrY, o3tl::Length::px));
aOrigin = o3tl::convert(aOrigin, o3tl::Length::twip, o3tl::Length::mm100);
// keep into account the zoom factor
aOrigin = aOrigin.scale(
aDrawMode.GetScaleX().GetDenominator(), aDrawMode.GetScaleX().GetNumerator(),
aDrawMode.GetScaleY().GetDenominator(), aDrawMode.GetScaleY().GetNumerator());
MapMode aNew = rDevice.GetMapMode();
aNew.SetOrigin(aOrigin);
rDevice.SetMapMode(aNew);
}
SdrView* pDrawView = pCurTabViewShell->GetScDrawView();
if(pDrawView)
{
// #i74769# work with SdrPaintWindow directly
pDrawView->EndDrawLayers(*pTargetPaintWindow, true);
}
pContentDev->SetMapMode(aCurrentMapMode);
}
}
// in place editing - lok case
if (bIsTiledRendering)
{
ScTabViewShell* pThisViewShell = mrViewData.GetViewShell();
ViewShellList aCurrentDocViewList = LOKEditViewHistory::GetSortedViewsForDoc(pThisViewShell->GetDocId());
tools::Rectangle aTileRectPx(Point(nScrX, nScrY), Size(aOutputData.GetScrW(), aOutputData.GetScrH()));
for (SfxViewShell* pVS: aCurrentDocViewList)
{
auto pTabViewShell = dynamic_cast<ScTabViewShell*>(pVS);
if (!pTabViewShell)
continue;
ScViewData& rOtherViewData = pTabViewShell->GetViewData();
ScSplitPos eOtherWhich = rOtherViewData.GetEditActivePart();
bool bOtherEditMode = rOtherViewData.HasEditView(eOtherWhich);
SCCOL nCol1 = rOtherViewData.GetEditStartCol();
SCROW nRow1 = rOtherViewData.GetEditStartRow();
SCCOL nCol2 = rOtherViewData.GetEditEndCol();
SCROW nRow2 = rOtherViewData.GetEditEndRow();
if (!(bOtherEditMode
&& ( nCol2 >= nX1 && nCol1 <= nX2 && nRow2 >= nY1 && nRow1 <= nY2 )
&& rOtherViewData.GetRefTabNo() == nTab))
continue; // only views where in place editing is occurring need to be rendered
EditView* pOtherEditView = rOtherViewData.GetEditView(eOtherWhich);
if (!pOtherEditView)
continue;
rDevice.SetLineColor();
// Theme colors
const ScPatternAttr* pPattern = rDoc.GetPattern( nCol1, nRow1, nTab );
Color aCellColor = pPattern->GetItem(ATTR_BACKGROUND).GetColor();
if (aCellColor.IsTransparent())
{
if (ScTabViewShell* pCurrentViewShell = dynamic_cast<ScTabViewShell*>(SfxViewShell::Current()))
{
const ScViewRenderingOptions& rViewRenderingOptions = pCurrentViewShell->GetViewRenderingData();
aCellColor = rViewRenderingOptions.GetDocColor();
}
}
rDevice.SetFillColor(aCellColor);
pOtherEditView->SetBackgroundColor(aCellColor);
// edit rectangle / background
Point aStart = mrViewData.GetScrPos( nCol1, nRow1, eOtherWhich );
Point aEnd = mrViewData.GetScrPos( nCol2+1, nRow2+1, eOtherWhich );
tools::Rectangle aEditRectPx(aStart, aEnd);
if (bLokRTL)
{
// Transform the cell range X coordinates such that the edit cell area is
// horizontally mirrored w.r.t the (combined-)tile.
aStart.setX(pLokRTLCtxt->docToTilePos(aStart.X()));
aEnd.setX(pLokRTLCtxt->docToTilePos(aEnd.X()));
}
// don't overwrite grid
tools::Long nLayoutSign = bLayoutRTL ? -1 : 1;
aEnd.AdjustX( -(2 * nLayoutSign) );
aEnd.AdjustY( -2 );
tools::Rectangle aBackground(aStart, aEnd);
if (bLokRTL)
aBackground.Normalize();
tools::Rectangle aBGAbs(aBackground);
// Need to draw the background in absolute coords.
Point aOriginTw = aOriginalMode.GetOrigin();
Point aOriginAbsTw = aOriginTw + o3tl::toTwips(aTileRectPx.GetPos(), o3tl::Length::px);
Point aOriginAbsPx = o3tl::convert(aOriginAbsTw, o3tl::Length::twip, o3tl::Length::px);
aBackground += aOriginAbsPx;
rDevice.SetMapMode(aDrawMode);
// keep into account the zoom factor
Point aNewOrigin(o3tl::convert(aOriginAbsTw, o3tl::Length::twip, o3tl::Length::mm100));
aNewOrigin = aNewOrigin.scale(
aDrawMode.GetScaleX().GetDenominator(), aDrawMode.GetScaleX().GetNumerator(),
aDrawMode.GetScaleY().GetDenominator(), aDrawMode.GetScaleY().GetNumerator());
MapMode aNewMM = rDevice.GetMapMode();
aNewMM.SetOrigin(aNewOrigin);
rDevice.SetMapMode(aNewMM);
// paint the background
rDevice.DrawRect(rDevice.PixelToLogic(aBackground));
OutputDevice& rOtherWin = pOtherEditView->GetOutputDevice();
const MapMode aOrigMapMode = rOtherWin.GetMapMode();
const o3tl::Length aOrigOutputAreaUnit = MapToO3tlLength(aOrigMapMode.GetMapUnit());
// paint text
const tools::Rectangle aOrigOutputArea(pOtherEditView->GetOutputArea()); // Not in pixels.
tools::Rectangle aNewOutputArea;
// compute output area for view with a different zoom level wrt the view used for painting
if (!(mrViewData.GetZoomX() == rOtherViewData.GetZoomX() &&
mrViewData.GetZoomY() == rOtherViewData.GetZoomY()))
{
Point aOtherStart = rOtherViewData.GetScrPos( nCol1, nRow1, eOtherWhich );
Point aOtherEnd = rOtherViewData.GetScrPos( nCol2+1, nRow2+1, eOtherWhich );
tools::Rectangle aOtherEditRect(
o3tl::convert(tools::Rectangle(aOtherStart, aOtherEnd), o3tl::Length::px,
aOrigOutputAreaUnit));
tools::Long sides[4];
for (auto i: {0, 1, 2, 3})
{
const Fraction zoomThis = ::GetZoom(mrViewData, i);
const Fraction zoomOther = ::GetZoom(rOtherViewData, i);
const auto unscaledOtherEditRectSide
= o3tl::convert(GetSide(aOtherEditRect, i),
zoomOther.GetDenominator(), zoomOther.GetNumerator());
const auto scaledAdd
= o3tl::convert(GetSide(aOrigOutputArea, i) - unscaledOtherEditRectSide,
zoomThis.GetNumerator(), zoomThis.GetDenominator());
sides[i] = GetSide(aEditRectPx, i)
+ o3tl::convert(scaledAdd, aOrigOutputAreaUnit, o3tl::Length::px);
}
aNewOutputArea = tools::Rectangle(sides[0], sides[1], sides[2], sides[3]);
aNewOutputArea += aOriginAbsPx;
}
// compute output area for RTL case
if (bLokRTL)
{
if (aNewOutputArea.IsEmpty())
{
// same zoom level as view used for painting
aNewOutputArea = rDevice.LogicToPixel(aOrigOutputArea);
}
// a small workaround for getting text position matching cursor position horizontally.
const tools::Long nCursorGapPx = 2;
// Transform the cell range X coordinates such that the edit cell area is
// horizontally mirrored w.r.t the (combined-)tile.
aNewOutputArea = tools::Rectangle(
pLokRTLCtxt->docToTilePos(aNewOutputArea.Left() - aOriginAbsPx.X()) + aOriginAbsPx.X(),
aNewOutputArea.Top(),
pLokRTLCtxt->docToTilePos(aNewOutputArea.Right() - aOriginAbsPx.X()) + aOriginAbsPx.X() + nCursorGapPx,
aNewOutputArea.Bottom());
aNewOutputArea.Normalize();
}
if (aNewOutputArea.IsEmpty())
{
// same zoom level and not RTL: no need to change the output area before painting
pOtherEditView->Paint(rDevice.PixelToLogic(aTileRectPx), &rDevice);
}
else
{
// EditView has an 'output area' which is used to clip the 'paint area' we provide below.
// So they need to be in the same coordinates/units. This is tied to the mapmode of the gridwin
// attached to the EditView, so we have to change its mapmode too (temporarily). We save the
// original mapmode and 'output area' and roll them back when we finish painting to rDevice.
rOtherWin.SetMapMode(rDevice.GetMapMode());
// Avoid sending wrong cursor/selection messages by the 'other' view, as the output-area is going
// to be tweaked temporarily to match the current view's zoom.
SuppressEditViewMessagesGuard aGuard(*pOtherEditView);
pOtherEditView->SetOutputArea(rDevice.PixelToLogic(aNewOutputArea));
pOtherEditView->Paint(rDevice.PixelToLogic(aTileRectPx), &rDevice);
// EditView will do the cursor notifications correctly if we're in
// print-twips messaging mode.
if (pTabViewShell == pThisViewShell
&& !comphelper::LibreOfficeKit::isCompatFlagSet(
comphelper::LibreOfficeKit::Compat::scPrintTwipsMsgs))
{
// Now we need to get relative cursor position within the editview.
// This is for sending the pixel-aligned twips position of the cursor to the specific views with
// the same given zoom level.
tools::Rectangle aCursorRect = pEditView->GetEditCursor();
Point aCursPos = o3tl::toTwips(aCursorRect.TopLeft(), o3tl::Length::mm100);
const MapMode& rDevMM = rDevice.GetMapMode();
MapMode aMM(MapUnit::MapTwip);
aMM.SetScaleX(rDevMM.GetScaleX());
aMM.SetScaleY(rDevMM.GetScaleY());
aBGAbs.AdjustLeft(1);
aBGAbs.AdjustTop(1);
aCursorRect = GetOutDev()->PixelToLogic(aBGAbs, aMM);
aCursorRect.setWidth(0);
aCursorRect.Move(aCursPos.getX(), 0);
// Sends view cursor position to views of all matching zooms if needed (avoids duplicates).
InvalidateLOKViewCursor(aCursorRect, aMM.GetScaleX(), aMM.GetScaleY());
}
// Rollback the mapmode and 'output area'.
rOtherWin.SetMapMode(aOrigMapMode);
pOtherEditView->SetOutputArea(aOrigOutputArea);
}
rDevice.SetMapMode(MapMode(MapUnit::MapPixel));
}
}
// In-place editing - when the user is typing, we need to paint the text
// using the editeng.
// It's being done after EndDrawLayers() to get it outside the overlay
// buffer and on top of everything.
if (bInPlaceEditing && !bIsTiledRendering)
{
aEditRectangle = tools::Rectangle(Point(nScrX, nScrY), Size(aOutputData.GetScrW(), aOutputData.GetScrH()));
DrawEditView(rDevice, pEditView);
if (bInPlaceVisCursor)
pInPlaceCrsr->Show();
}
if (mrViewData.HasEditView(eWhich))
{
// flush OverlayManager before changing the MapMode
flushOverlayManager();
// set MapMode for text edit
rDevice.SetMapMode(mrViewData.GetLogicMode());
}
else
rDevice.SetMapMode(aDrawMode);
if (mpNoteMarker)
mpNoteMarker->Draw(); // Above the cursor, in drawing map mode
if (bPage && bInitialPageBreaks)
SetupInitialPageBreaks(rDoc, nTab);
}
void ScGridWindow::SetupInitialPageBreaks(const ScDocument& rDoc, SCTAB nTab)
{
// tdf#124983, if option LibreOfficeDev Calc/View/Visual Aids/Page breaks
// is enabled, breaks should be visible. If the document is opened the first
// time, the breaks are not calculated yet, so for this initialization
// a timer will be triggered here.
std::set<SCCOL> aColBreaks;
std::set<SCROW> aRowBreaks;
rDoc.GetAllColBreaks(aColBreaks, nTab, true, false);
rDoc.GetAllRowBreaks(aRowBreaks, nTab, true, false);
if (aColBreaks.empty() || aRowBreaks.empty())
{
maShowPageBreaksTimer.SetPriority(TaskPriority::DEFAULT_IDLE);
maShowPageBreaksTimer.Start();
}
bInitialPageBreaks = false;
}
namespace
{
template<typename IndexType>
void lcl_getBoundingRowColumnforTile(ScViewData& rViewData,
tools::Long nTileStartPosPx, tools::Long nTileEndPosPx,
sal_Int32& nTopLeftTileOffset, sal_Int32& nTopLeftTileOrigin,
sal_Int32& nTopLeftTileIndex, sal_Int32& nBottomRightTileIndex)
{
const bool bColumnHeader = std::is_same<IndexType, SCCOL>::value;
SCTAB nTab = rViewData.GetTabNo();
IndexType nStartIndex = -1;
IndexType nEndIndex = -1;
tools::Long nStartPosPx = 0;
tools::Long nEndPosPx = 0;
ScPositionHelper& rPositionHelper =
bColumnHeader ? rViewData.GetLOKWidthHelper() : rViewData.GetLOKHeightHelper();
const auto& rStartNearest = rPositionHelper.getNearestByPosition(nTileStartPosPx);
const auto& rEndNearest = rPositionHelper.getNearestByPosition(nTileEndPosPx);
ScBoundsProvider aBoundsProvider(rViewData, nTab, bColumnHeader);
aBoundsProvider.Compute(rStartNearest, rEndNearest, nTileStartPosPx, nTileEndPosPx);
aBoundsProvider.GetStartIndexAndPosition(nStartIndex, nStartPosPx); ++nStartIndex;
aBoundsProvider.GetEndIndexAndPosition(nEndIndex, nEndPosPx);
nTopLeftTileOffset = nTileStartPosPx - nStartPosPx;
nTopLeftTileOrigin = nStartPosPx;
nTopLeftTileIndex = nStartIndex;
nBottomRightTileIndex = nEndIndex;
}
void lcl_RTLAdjustTileColOffset(ScViewData& rViewData, sal_Int32& nTileColOffset,
tools::Long nTileEndPx, sal_Int32 nEndCol, SCTAB nTab,
const ScDocument& rDoc, double fPPTX)
{
auto GetColWidthPx = [&rDoc, nTab, fPPTX](SCCOL nCol) {
const sal_uInt16 nSize = rDoc.GetColWidth(nCol, nTab);
const tools::Long nSizePx = ScViewData::ToPixel(nSize, fPPTX);
return nSizePx;
};
ScPositionHelper rHelper = rViewData.GetLOKWidthHelper();
tools::Long nEndColPos = rHelper.computePosition(nEndCol, GetColWidthPx);
nTileColOffset += (nEndColPos - nTileEndPx - nTileColOffset);
}
class ScLOKProxyObjectContact final : public sdr::contact::ObjectContactOfPageView
{
private:
ScDrawView* mpScDrawView;
public:
explicit ScLOKProxyObjectContact(
ScDrawView* pDrawView,
SdrPageWindow& rPageWindow,
const char* pDebugName) :
ObjectContactOfPageView(rPageWindow, pDebugName),
mpScDrawView(pDrawView)
{
}
virtual bool supportsGridOffsets() const override { return true; }
virtual void calculateGridOffsetForViewObjectContact(
basegfx::B2DVector& rTarget,
const sdr::contact::ViewObjectContact& rClient) const override
{
if (!mpScDrawView)
return;
SdrPageView* pPageView(mpScDrawView->GetSdrPageView());
if (!pPageView)
return;
SdrPageWindow* pSdrPageWindow = nullptr;
if (pPageView->PageWindowCount() > 0)
pSdrPageWindow = pPageView->GetPageWindow(0);
if (!pSdrPageWindow)
return;
sdr::contact::ObjectContact& rObjContact(pSdrPageWindow->GetObjectContact());
SdrObject* pTargetSdrObject(rClient.GetViewContact().TryToGetSdrObject());
if (pTargetSdrObject)
rTarget = pTargetSdrObject->GetViewContact().GetViewObjectContact(rObjContact).getGridOffset();
}
};
class ScLOKDrawView : public FmFormView
{
public:
ScLOKDrawView(OutputDevice* pOut, ScViewData& rData) :
FmFormView(*rData.GetDocument().GetDrawLayer(), pOut),
mpScDrawView(rData.GetScDrawView())
{
}
virtual sdr::contact::ObjectContact* createViewSpecificObjectContact(
SdrPageWindow& rPageWindow, const char* pDebugName) const override
{
if (!mpScDrawView)
return SdrView::createViewSpecificObjectContact(rPageWindow, pDebugName);
return new ScLOKProxyObjectContact(mpScDrawView, rPageWindow, pDebugName);
}
private:
ScDrawView* mpScDrawView;
};
} // anonymous namespace
void ScGridWindow::PaintTile( VirtualDevice& rDevice,
int nOutputWidth, int nOutputHeight,
int nTilePosX, int nTilePosY,
tools::Long nTileWidth, tools::Long nTileHeight,
SCCOL nTiledRenderingAreaEndCol, SCROW nTiledRenderingAreaEndRow )
{
Fraction origZoomX = mrViewData.GetZoomX();
Fraction origZoomY = mrViewData.GetZoomY();
// Output size is in pixels while tile position and size are in logical units (twips).
// Assumption: always paint the whole sheet i.e. "visible" range is always
// from (0,0) to last data position.
// Tile geometry is independent of the zoom level, but the output size is
// dependent of the zoom level. Determine the correct zoom level before
// we start.
// FIXME the painting works using a mixture of drawing with coordinates in
// pixels and in logic coordinates; it should be cleaned up to use logic
// coords only, and avoid all the SetMapMode()'s.
// Similarly to Writer, we should set the mapmode once on the rDevice, and
// not care about any zoom settings.
Fraction aFracX(o3tl::convert(nOutputWidth, o3tl::Length::px, o3tl::Length::twip), nTileWidth);
Fraction aFracY(o3tl::convert(nOutputHeight, o3tl::Length::px, o3tl::Length::twip), nTileHeight);
const bool bChangeZoom = (aFracX != origZoomX || aFracY != origZoomY);
// page break zoom, and aLogicMode in ScViewData
// FIXME: there are issues when SetZoom is called conditionally.
mrViewData.SetZoom(aFracX, aFracY, true);
if (bChangeZoom)
{
if (ScDrawView* pDrawView = mrViewData.GetScDrawView())
pDrawView->resetGridOffsetsForAllSdrPageViews();
}
const double fTilePosXPixel = static_cast<double>(nTilePosX) * nOutputWidth / nTileWidth;
const double fTilePosYPixel = static_cast<double>(nTilePosY) * nOutputHeight / nTileHeight;
const double fTileBottomPixel = static_cast<double>(nTilePosY + nTileHeight) * nOutputHeight / nTileHeight;
const double fTileRightPixel = static_cast<double>(nTilePosX + nTileWidth) * nOutputWidth / nTileWidth;
SCTAB nTab = mrViewData.GetTabNo();
ScDocument& rDoc = mrViewData.GetDocument();
const double fPPTX = mrViewData.GetPPTX();
const double fPPTY = mrViewData.GetPPTY();
// find approximate col/row offsets of nearby.
sal_Int32 nTopLeftTileRowOffset = 0;
sal_Int32 nTopLeftTileColOffset = 0;
sal_Int32 nTopLeftTileRowOrigin = 0;
sal_Int32 nTopLeftTileColOrigin = 0;
sal_Int32 nTopLeftTileRow = 0;
sal_Int32 nTopLeftTileCol = 0;
sal_Int32 nBottomRightTileRow = 0;
sal_Int32 nBottomRightTileCol = 0;
lcl_getBoundingRowColumnforTile<SCROW>(mrViewData,
fTilePosYPixel, fTileBottomPixel,
nTopLeftTileRowOffset, nTopLeftTileRowOrigin,
nTopLeftTileRow, nBottomRightTileRow);
lcl_getBoundingRowColumnforTile<SCCOL>(mrViewData,
fTilePosXPixel, fTileRightPixel,
nTopLeftTileColOffset, nTopLeftTileColOrigin,
nTopLeftTileCol, nBottomRightTileCol);
// Enlarge
nBottomRightTileCol++;
nBottomRightTileRow++;
if (nTopLeftTileCol > rDoc.MaxCol())
nTopLeftTileCol = rDoc.MaxCol();
if (nBottomRightTileCol > rDoc.MaxCol())
nBottomRightTileCol = rDoc.MaxCol();
if (nTopLeftTileRow > MAXTILEDROW)
nTopLeftTileRow = MAXTILEDROW;
if (nBottomRightTileRow > MAXTILEDROW)
nBottomRightTileRow = MAXTILEDROW;
bool bLayoutRTL = rDoc.IsLayoutRTL( nTab );
if (bLayoutRTL)
{
lcl_RTLAdjustTileColOffset(mrViewData, nTopLeftTileColOffset,
fTileRightPixel, nBottomRightTileCol, nTab,
rDoc, fPPTX);
}
// size of the document including drawings, charts, etc.
SCCOL nEndCol = nTiledRenderingAreaEndCol;
SCROW nEndRow = nTiledRenderingAreaEndRow;
if (nEndCol < nBottomRightTileCol)
nEndCol = nBottomRightTileCol;
if (nEndRow < nBottomRightTileRow)
nEndRow = nBottomRightTileRow;
nTopLeftTileCol = std::max<sal_Int32>(nTopLeftTileCol, 0);
nTopLeftTileRow = std::max<sal_Int32>(nTopLeftTileRow, 0);
nTopLeftTileColOrigin = o3tl::convert(nTopLeftTileColOrigin, o3tl::Length::px, o3tl::Length::twip);
nTopLeftTileRowOrigin = o3tl::convert(nTopLeftTileRowOrigin, o3tl::Length::px, o3tl::Length::twip);
// Checkout -> 'rDoc.ExtendMerge' ... if we miss merged cells.
// Origin must be the offset of the first col and row
// containing our top-left pixel.
const MapMode aOriginalMode = rDevice.GetMapMode();
MapMode aAbsMode = aOriginalMode;
const Point aOrigin(-nTopLeftTileColOrigin, -nTopLeftTileRowOrigin);
aAbsMode.SetOrigin(aOrigin);
rDevice.SetMapMode(aAbsMode);
ScTableInfo aTabInfo(nTopLeftTileRow, nBottomRightTileRow, false);
rDoc.FillInfo(aTabInfo, nTopLeftTileCol, nTopLeftTileRow,
nBottomRightTileCol, nBottomRightTileRow,
nTab, fPPTX, fPPTY, false, false);
// FIXME: is this called some
// Point aScrPos = mrViewData.GetScrPos( nX1, nY1, eWhich );
ScOutputData aOutputData(&rDevice, OUTTYPE_WINDOW, aTabInfo, &rDoc, nTab,
-nTopLeftTileColOffset,
-nTopLeftTileRowOffset,
nTopLeftTileCol, nTopLeftTileRow,
nBottomRightTileCol, nBottomRightTileRow,
fPPTX, fPPTY, nullptr, nullptr);
// setup the SdrPage so that drawinglayer works correctly
ScDrawLayer* pModel = rDoc.GetDrawLayer();
if (pModel)
{
bool bPrintTwipsMsgs = comphelper::LibreOfficeKit::isCompatFlagSet(
comphelper::LibreOfficeKit::Compat::scPrintTwipsMsgs);
if (!mpLOKDrawView)
{
mpLOKDrawView.reset(bPrintTwipsMsgs ?
new ScLOKDrawView(
&rDevice,
mrViewData) :
new FmFormView(
*pModel,
&rDevice));
}
mpLOKDrawView->SetNegativeX(bLayoutRTL);
mpLOKDrawView->ShowSdrPage(mpLOKDrawView->GetModel().GetPage(nTab));
aOutputData.SetDrawView(mpLOKDrawView.get());
aOutputData.SetSpellCheckContext(mpSpellCheckCxt.get());
}
// draw the content
DrawContent(rDevice, aTabInfo, aOutputData, true);
rDevice.SetMapMode(aOriginalMode);
// Paint the chart(s) in edit mode.
LokChartHelper::PaintAllChartsOnTile(rDevice, nOutputWidth, nOutputHeight,
nTilePosX, nTilePosY, nTileWidth, nTileHeight, bLayoutRTL);
rDevice.SetMapMode(aOriginalMode);
// Flag drawn formula cells "unchanged".
rDoc.ResetChanged(ScRange(nTopLeftTileCol, nTopLeftTileRow, nTab, nBottomRightTileCol, nBottomRightTileRow, nTab));
rDoc.PrepareFormulaCalc();
mrViewData.SetZoom(origZoomX, origZoomY, true);
if (bChangeZoom)
{
if (ScDrawView* pDrawView = mrViewData.GetScDrawView())
pDrawView->resetGridOffsetsForAllSdrPageViews();
}
if (bLayoutRTL)
{
Bitmap aCellBMP = rDevice.GetBitmap(Point(0, 0), Size(nOutputWidth, nOutputHeight));
aCellBMP.Mirror(BmpMirrorFlags::Horizontal);
rDevice.DrawBitmap(Point(0, 0), Size(nOutputWidth, nOutputHeight), aCellBMP);
}
}
void ScGridWindow::LogicInvalidatePart(const tools::Rectangle* pRectangle, int nPart)
{
tools::Rectangle aRectangle;
tools::Rectangle* pResultRectangle;
if (!pRectangle)
pResultRectangle = nullptr;
else
{
aRectangle = *pRectangle;
// When dragging shapes the map mode is disabled.
if (IsMapModeEnabled())
{
if (GetMapMode().GetMapUnit() == MapUnit::Map100thMM)
{
aRectangle = o3tl::convert(aRectangle, o3tl::Length::mm100, o3tl::Length::twip);
}
}
else
aRectangle = PixelToLogic(aRectangle, MapMode(MapUnit::MapTwip));
pResultRectangle = &aRectangle;
}
// Trim invalidation rectangle overlapping negative X region in RTL mode.
if (pResultRectangle && pResultRectangle->Left() < 0
&& mrViewData.GetDocument().IsLayoutRTL(mrViewData.GetTabNo()))
{
pResultRectangle->SetLeft(0);
if (pResultRectangle->Right() < 0)
pResultRectangle->SetRight(0);
}
ScTabViewShell* pViewShell = mrViewData.GetViewShell();
SfxLokHelper::notifyInvalidation(pViewShell, nPart, pResultRectangle);
}
void ScGridWindow::LogicInvalidate(const tools::Rectangle* pRectangle)
{
ScTabViewShell* pViewShell = mrViewData.GetViewShell();
LogicInvalidatePart(pRectangle, pViewShell->getPart());
}
bool ScGridWindow::InvalidateByForeignEditView(EditView* pEditView)
{
if (!pEditView)
return false;
auto* pGridWin = dynamic_cast<ScGridWindow*>(pEditView->GetWindow());
if (!pGridWin)
return false;
const ScViewData& rViewData = pGridWin->getViewData();
tools::Long nRefTabNo = rViewData.GetRefTabNo();
tools::Long nX = rViewData.GetCurXForTab(nRefTabNo);
tools::Long nY = rViewData.GetCurYForTab(nRefTabNo);
tools::Rectangle aPixRect = getViewData().GetEditArea(eWhich, nX, nY, this, nullptr, true);
tools::Rectangle aLogicRect = PixelToLogic(aPixRect, getViewData().GetLogicMode());
Invalidate(pEditView->IsNegativeX() ? lcl_negateRectX(aLogicRect) : aLogicRect);
return true;
}
void ScGridWindow::SetCellSelectionPixel(int nType, int nPixelX, int nPixelY)
{
ScTabView* pTabView = mrViewData.GetView();
ScTabViewShell* pViewShell = mrViewData.GetViewShell();
ScInputHandler* pInputHandler = SC_MOD()->GetInputHdl(pViewShell);
if (pInputHandler && pInputHandler->IsInputMode())
{
// we need to switch off the editeng
ScTabView::UpdateInputLine();
pViewShell->UpdateInputHandler();
}
if (nType == LOK_SETTEXTSELECTION_RESET)
{
pTabView->DoneBlockMode();
return;
}
// obtain the current selection
ScRangeList aRangeList = mrViewData.GetMarkData().GetMarkedRanges();
SCCOL nCol1, nCol2;
SCROW nRow1, nRow2;
SCTAB nTab1, nTab2;
bool bWasEmpty = false;
if (aRangeList.empty())
{
nCol1 = nCol2 = mrViewData.GetCurX();
nRow1 = nRow2 = mrViewData.GetCurY();
bWasEmpty = true;
}
else
aRangeList.Combine().GetVars(nCol1, nRow1, nTab1, nCol2, nRow2, nTab2);
// convert the coordinates to column/row
SCCOL nNewPosX;
SCROW nNewPosY;
SCTAB nTab = mrViewData.GetTabNo();
mrViewData.GetPosFromPixel(nPixelX, nPixelY, eWhich, nNewPosX, nNewPosY);
// change the selection
switch (nType)
{
case LOK_SETTEXTSELECTION_START:
if (nNewPosX != nCol1 || nNewPosY != nRow1 || bWasEmpty)
{
pTabView->SetCursor(nNewPosX, nNewPosY);
pTabView->DoneBlockMode();
pTabView->InitBlockMode(nNewPosX, nNewPosY, nTab, true);
pTabView->MarkCursor(nCol2, nRow2, nTab);
}
break;
case LOK_SETTEXTSELECTION_END:
if (nNewPosX != nCol2 || nNewPosY != nRow2 || bWasEmpty)
{
pTabView->SetCursor(nCol1, nRow1);
pTabView->DoneBlockMode();
pTabView->InitBlockMode(nCol1, nRow1, nTab, true);
pTabView->MarkCursor(nNewPosX, nNewPosY, nTab);
}
break;
default:
assert(false);
break;
}
}
void ScGridWindow::CheckNeedsRepaint()
{
// called at the end of painting, and from timer after background text width calculation
if (!bNeedsRepaint)
return;
bNeedsRepaint = false;
if (aRepaintPixel.IsEmpty())
Invalidate();
else
Invalidate(PixelToLogic(aRepaintPixel));
aRepaintPixel = tools::Rectangle();
// selection function in status bar might also be invalid
SfxBindings& rBindings = mrViewData.GetBindings();
rBindings.Invalidate( SID_STATUS_SUM );
rBindings.Invalidate( SID_ATTR_SIZE );
rBindings.Invalidate( SID_TABLE_CELL );
}
void ScGridWindow::DrawHiddenIndicator( SCCOL nX1, SCROW nY1, SCCOL nX2, SCROW nY2, vcl::RenderContext& rRenderContext)
{
ScDocument& rDoc = mrViewData.GetDocument();
SCTAB nTab = mrViewData.GetTabNo();
const svtools::ColorConfig& rColorCfg = SC_MOD()->GetColorConfig();
const svtools::ColorConfigValue aColorValue = rColorCfg.GetColorValue(svtools::CALCHIDDENROWCOL);
if (aColorValue.bIsVisible) {
rRenderContext.SetLineColor(aColorValue.nColor);
LineInfo aLineInfo(LineStyle::Dash, 2);
aLineInfo.SetDashCount(0);
aLineInfo.SetDotCount(1);
aLineInfo.SetDistance(15);
// round caps except when running VCL_PLUGIN=gen due to a performance issue
// https://bugs.documentfoundation.org/show_bug.cgi?id=128258#c14
if (mrViewData.GetActiveWin()->GetSystemData()->toolkit != SystemEnvData::Toolkit::Gen)
aLineInfo.SetLineCap(css::drawing::LineCap_ROUND);
aLineInfo.SetDotLen(1);
for (int i=nX1; i<nX2; i++) {
if (rDoc.ColHidden(i,nTab) && (i<rDoc.MaxCol() ? !rDoc.ColHidden(i+1,nTab) : true)) {
Point aStart = mrViewData.GetScrPos(i, nY1, eWhich, true );
Point aEnd = mrViewData.GetScrPos(i, nY2, eWhich, true );
rRenderContext.DrawLine(aStart,aEnd,aLineInfo);
}
}
for (int i=nY1; i<nY2; i++) {
if (rDoc.RowHidden(i,nTab) && (i<rDoc.MaxRow() ? !rDoc.RowHidden(i+1,nTab) : true)) {
Point aStart = mrViewData.GetScrPos(nX1, i, eWhich, true );
Point aEnd = mrViewData.GetScrPos(nX2, i, eWhich, true );
rRenderContext.DrawLine(aStart,aEnd,aLineInfo);
}
}
} //visible
}
void ScGridWindow::DrawPagePreview( SCCOL nX1, SCROW nY1, SCCOL nX2, SCROW nY2, vcl::RenderContext& rRenderContext)
{
ScPageBreakData* pPageData = mrViewData.GetView()->GetPageBreakData();
if (!pPageData)
return;
ScDocument& rDoc = mrViewData.GetDocument();
SCTAB nTab = mrViewData.GetTabNo();
Size aWinSize = GetOutputSizePixel();
const svtools::ColorConfig& rColorCfg = SC_MOD()->GetColorConfig();
Color aManual( rColorCfg.GetColorValue(svtools::CALCPAGEBREAKMANUAL).nColor );
Color aAutomatic( rColorCfg.GetColorValue(svtools::CALCPAGEBREAK).nColor );
OUString aPageStr = ScResId( STR_PGNUM );
if ( nPageScript == SvtScriptType::NONE )
{
// get script type of translated "Page" string only once
nPageScript = rDoc.GetStringScriptType( aPageStr );
if (nPageScript == SvtScriptType::NONE)
nPageScript = ScGlobal::GetDefaultScriptType();
}
vcl::Font aFont;
std::unique_ptr<ScEditEngineDefaulter> pEditEng;
const ScPatternAttr& rDefPattern(rDoc.getCellAttributeHelper().getDefaultCellAttribute());
if ( nPageScript == SvtScriptType::LATIN )
{
// use single font and call DrawText directly
rDefPattern.fillFontOnly(aFont);
aFont.SetColor(COL_LIGHTGRAY);
// font size is set as needed
}
else
{
// use EditEngine to draw mixed-script string
pEditEng.reset(new ScEditEngineDefaulter( EditEngine::CreatePool().get(), true ));
pEditEng->SetRefMapMode(rRenderContext.GetMapMode());
auto pEditDefaults = std::make_unique<SfxItemSet>( pEditEng->GetEmptyItemSet() );
rDefPattern.FillEditItemSet( pEditDefaults.get() );
pEditDefaults->Put( SvxColorItem( COL_LIGHTGRAY, EE_CHAR_COLOR ) );
pEditEng->SetDefaults( std::move(pEditDefaults) );
}
sal_uInt16 nCount = sal::static_int_cast<sal_uInt16>( pPageData->GetCount() );
for (sal_uInt16 nPos=0; nPos<nCount; nPos++)
{
ScPrintRangeData& rData = pPageData->GetData(nPos);
ScRange aRange = rData.GetPrintRange();
if ( aRange.aStart.Col() <= nX2+1 && aRange.aEnd.Col()+1 >= nX1 &&
aRange.aStart.Row() <= nY2+1 && aRange.aEnd.Row()+1 >= nY1 )
{
// 3 pixel frame around the print area
// (middle pixel on the grid lines)
rRenderContext.SetLineColor();
if (rData.IsAutomatic())
rRenderContext.SetFillColor( aAutomatic );
else
rRenderContext.SetFillColor( aManual );
Point aStart = mrViewData.GetScrPos(
aRange.aStart.Col(), aRange.aStart.Row(), eWhich, true );
Point aEnd = mrViewData.GetScrPos(
aRange.aEnd.Col() + 1, aRange.aEnd.Row() + 1, eWhich, true );
aStart.AdjustX( -2 );
aStart.AdjustY( -2 );
// Prevent overflows:
if ( aStart.X() < -10 ) aStart.setX( -10 );
if ( aStart.Y() < -10 ) aStart.setY( -10 );
if ( aEnd.X() > aWinSize.Width() + 10 )
aEnd.setX( aWinSize.Width() + 10 );
if ( aEnd.Y() > aWinSize.Height() + 10 )
aEnd.setY( aWinSize.Height() + 10 );
rRenderContext.DrawRect( tools::Rectangle( aStart, Point(aEnd.X(),aStart.Y()+2) ) );
rRenderContext.DrawRect( tools::Rectangle( aStart, Point(aStart.X()+2,aEnd.Y()) ) );
rRenderContext.DrawRect( tools::Rectangle( Point(aStart.X(),aEnd.Y()-2), aEnd ) );
rRenderContext.DrawRect( tools::Rectangle( Point(aEnd.X()-2,aStart.Y()), aEnd ) );
// Page breaks
//! Display differently (dashed ????)
size_t nColBreaks = rData.GetPagesX();
const SCCOL* pColEnd = rData.GetPageEndX();
size_t nColPos;
for (nColPos=0; nColPos+1<nColBreaks; nColPos++)
{
SCCOL nBreak = pColEnd[nColPos]+1;
if ( nBreak >= nX1 && nBreak <= nX2+1 )
{
//! Search for hidden
if (rDoc.HasColBreak(nBreak, nTab) & ScBreakType::Manual)
rRenderContext.SetFillColor( aManual );
else
rRenderContext.SetFillColor( aAutomatic );
Point aBreak = mrViewData.GetScrPos(
nBreak, aRange.aStart.Row(), eWhich, true );
rRenderContext.DrawRect( tools::Rectangle( aBreak.X()-1, aStart.Y(), aBreak.X(), aEnd.Y() ) );
}
}
size_t nRowBreaks = rData.GetPagesY();
const SCROW* pRowEnd = rData.GetPageEndY();
size_t nRowPos;
for (nRowPos=0; nRowPos+1<nRowBreaks; nRowPos++)
{
SCROW nBreak = pRowEnd[nRowPos]+1;
if ( nBreak >= nY1 && nBreak <= nY2+1 )
{
//! Search for hidden
if (rDoc.HasRowBreak(nBreak, nTab) & ScBreakType::Manual)
rRenderContext.SetFillColor( aManual );
else
rRenderContext.SetFillColor( aAutomatic );
Point aBreak = mrViewData.GetScrPos(
aRange.aStart.Col(), nBreak, eWhich, true );
rRenderContext.DrawRect( tools::Rectangle( aStart.X(), aBreak.Y()-1, aEnd.X(), aBreak.Y() ) );
}
}
// Page numbers
SCROW nPrStartY = aRange.aStart.Row();
for (nRowPos=0; nRowPos<nRowBreaks; nRowPos++)
{
SCROW nPrEndY = pRowEnd[nRowPos];
if ( nPrEndY >= nY1 && nPrStartY <= nY2 )
{
SCCOL nPrStartX = aRange.aStart.Col();
for (nColPos=0; nColPos<nColBreaks; nColPos++)
{
SCCOL nPrEndX = pColEnd[nColPos];
if ( nPrEndX >= nX1 && nPrStartX <= nX2 )
{
Point aPageStart = mrViewData.GetScrPos(
nPrStartX, nPrStartY, eWhich, true );
Point aPageEnd = mrViewData.GetScrPos(
nPrEndX+1,nPrEndY+1, eWhich, true );
tools::Long nPageNo = rData.GetFirstPage();
if ( rData.IsTopDown() )
nPageNo += static_cast<tools::Long>(nColPos)*nRowBreaks+nRowPos;
else
nPageNo += static_cast<tools::Long>(nRowPos)*nColBreaks+nColPos;
OUString aThisPageStr = aPageStr.replaceFirst("%1", OUString::number(nPageNo));
if ( pEditEng )
{
// find right font size with EditEngine
tools::Long nHeight = 100;
pEditEng->SetDefaultItem( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT ) );
pEditEng->SetDefaultItem( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT_CJK ) );
pEditEng->SetDefaultItem( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT_CTL ) );
pEditEng->SetTextCurrentDefaults( aThisPageStr );
Size aSize100( pEditEng->CalcTextWidth(), pEditEng->GetTextHeight() );
// 40% of width or 60% of height
tools::Long nSizeX = 40 * ( aPageEnd.X() - aPageStart.X() ) / aSize100.Width();
tools::Long nSizeY = 60 * ( aPageEnd.Y() - aPageStart.Y() ) / aSize100.Height();
nHeight = std::min(nSizeX,nSizeY);
pEditEng->SetDefaultItem( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT ) );
pEditEng->SetDefaultItem( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT_CJK ) );
pEditEng->SetDefaultItem( SvxFontHeightItem( nHeight, 100, EE_CHAR_FONTHEIGHT_CTL ) );
// centered output with EditEngine
Size aTextSize( pEditEng->CalcTextWidth(), pEditEng->GetTextHeight() );
Point aPos( (aPageStart.X()+aPageEnd.X()-aTextSize.Width())/2,
(aPageStart.Y()+aPageEnd.Y()-aTextSize.Height())/2 );
pEditEng->Draw(rRenderContext, aPos);
}
else
{
// find right font size for DrawText
aFont.SetFontSize( Size( 0,100 ) );
rRenderContext.SetFont( aFont );
Size aSize100(rRenderContext.GetTextWidth( aThisPageStr ), rRenderContext.GetTextHeight() );
if (aSize100.Width() && aSize100.Height())
{
// 40% of width or 60% of height
tools::Long nSizeX = 40 * ( aPageEnd.X() - aPageStart.X() ) / aSize100.Width();
tools::Long nSizeY = 60 * ( aPageEnd.Y() - aPageStart.Y() ) / aSize100.Height();
aFont.SetFontSize( Size( 0,std::min(nSizeX,nSizeY) ) );
rRenderContext.SetFont( aFont );
}
// centered output with DrawText
Size aTextSize(rRenderContext.GetTextWidth( aThisPageStr ), rRenderContext.GetTextHeight() );
Point aPos( (aPageStart.X()+aPageEnd.X()-aTextSize.Width())/2,
(aPageStart.Y()+aPageEnd.Y()-aTextSize.Height())/2 );
rRenderContext.DrawText( aPos, aThisPageStr );
}
}
nPrStartX = nPrEndX + 1;
}
}
nPrStartY = nPrEndY + 1;
}
}
}
}
void ScGridWindow::DrawButtons(SCCOL nX1, SCCOL nX2, const ScTableInfo& rTabInfo, OutputDevice* pContentDev, const ScLokRTLContext* pLokRTLContext)
{
aComboButton.SetOutputDevice( pContentDev );
ScDocument& rDoc = mrViewData.GetDocument();
ScDPFieldButton aCellBtn(pContentDev, &GetSettings().GetStyleSettings(), &mrViewData.GetZoomY(), &rDoc);
SCCOL nCol;
SCROW nRow;
SCSIZE nArrY;
SCSIZE nQuery;
SCTAB nTab = mrViewData.GetTabNo();
ScDBData* pDBData = nullptr;
std::unique_ptr<ScQueryParam> pQueryParam;
RowInfo* pRowInfo = rTabInfo.mpRowInfo.get();
sal_uInt16 nArrCount = rTabInfo.mnArrCount;
bool bLayoutRTL = rDoc.IsLayoutRTL( nTab );
Point aOldPos = aComboButton.GetPosPixel(); // store state for MouseDown/Up
Size aOldSize = aComboButton.GetSizePixel();
for (nArrY=1; nArrY+1<nArrCount; nArrY++)
{
if ( pRowInfo[nArrY].bAutoFilter && pRowInfo[nArrY].bChanged )
{
RowInfo* pThisRowInfo = &pRowInfo[nArrY];
nRow = pThisRowInfo->nRowNo;
for (nCol=nX1; nCol<=nX2; nCol++)
{
ScCellInfo* pInfo = &pThisRowInfo->cellInfo(nCol);
//if several columns merged on a row, there should be only one auto button at the end of the columns.
//if several rows merged on a column, the button may be in the middle, so "!pInfo->bVOverlapped" should not be used
if ( pInfo->bAutoFilter && !pInfo->bHOverlapped )
{
if (!pQueryParam)
pQueryParam.reset(new ScQueryParam);
bool bNewData = true;
if (pDBData)
{
SCCOL nStartCol;
SCROW nStartRow;
SCCOL nEndCol;
SCROW nEndRow;
SCTAB nAreaTab;
pDBData->GetArea( nAreaTab, nStartCol, nStartRow, nEndCol, nEndRow );
if ( nCol >= nStartCol && nCol <= nEndCol &&
nRow >= nStartRow && nRow <= nEndRow )
bNewData = false;
}
if (bNewData)
{
pDBData = rDoc.GetDBAtCursor( nCol, nRow, nTab, ScDBDataPortion::AREA );
if (pDBData)
pDBData->GetQueryParam( *pQueryParam );
else
{
// can also be part of DataPilot table
}
}
// pQueryParam can only include MAXQUERY entries
bool bArrowState = false;
if (pQueryParam->bInplace)
{
SCSIZE nCount = pQueryParam->GetEntryCount();
for (nQuery = 0; nQuery < nCount; ++nQuery)
{
// Do no restrict to EQUAL here
// (Column head should become blue also when ">1")
const ScQueryEntry& rEntry = pQueryParam->GetEntry(nQuery);
if (rEntry.bDoQuery && rEntry.nField == nCol)
{
bArrowState = true;
break;
}
}
}
tools::Long nSizeX;
tools::Long nSizeY;
SCCOL nStartCol= nCol;
SCROW nStartRow = nRow;
//if address(nCol,nRow) is not the start pos of the merge area, the value of the nSizeX will be incorrect, it will be the length of the cell.
//should first get the start pos of the merge area, then get the nSizeX through the start pos.
rDoc.ExtendOverlapped(nStartCol, nStartRow,nCol, nRow, nTab);//get nStartCol,nStartRow
mrViewData.GetMergeSizePixel( nStartCol, nStartRow, nSizeX, nSizeY );//get nSizeX
nSizeY = ScViewData::ToPixel(rDoc.GetRowHeight(nRow, nTab), mrViewData.GetPPTY());
Point aScrPos = mrViewData.GetScrPos( nCol, nRow, eWhich );
if (pLokRTLContext)
aScrPos.setX(pLokRTLContext->docToTilePos(aScrPos.X()));
aCellBtn.setBoundingBox(aScrPos, Size(nSizeX-1, nSizeY-1), bLayoutRTL);
aCellBtn.setPopupLeft(bLayoutRTL); // #i114944# AutoFilter button is left-aligned in RTL
aCellBtn.setDrawBaseButton(false);
aCellBtn.setDrawPopupButton(true);
aCellBtn.setHasHiddenMember(bArrowState);
aCellBtn.draw();
}
}
}
if ( (pRowInfo[nArrY].bPivotToggle || pRowInfo[nArrY].bPivotButton) && pRowInfo[nArrY].bChanged )
{
RowInfo* pThisRowInfo = &pRowInfo[nArrY];
nRow = pThisRowInfo->nRowNo;
for (nCol=nX1; nCol<=nX2; nCol++)
{
ScCellInfo* pInfo = &pThisRowInfo->cellInfo(nCol);
if (pInfo->bHOverlapped || pInfo->bVOverlapped)
continue;
Point aScrPos = mrViewData.GetScrPos( nCol, nRow, eWhich );
tools::Long nSizeX;
tools::Long nSizeY;
mrViewData.GetMergeSizePixel( nCol, nRow, nSizeX, nSizeY );
tools::Long nPosX = aScrPos.X();
tools::Long nPosY = aScrPos.Y();
// bLayoutRTL is handled in setBoundingBox
bool bDrawToggle = pInfo->bPivotCollapseButton || pInfo->bPivotExpandButton;
if (!bDrawToggle)
{
OUString aStr = rDoc.GetString(nCol, nRow, nTab);
aCellBtn.setText(aStr);
}
sal_uInt16 nIndent = 0;
if (const ScIndentItem* pIndentItem = rDoc.GetAttr(nCol, nRow, nTab, ATTR_INDENT))
nIndent = pIndentItem->GetValue();
aCellBtn.setBoundingBox(Point(nPosX, nPosY), Size(nSizeX-1, nSizeY-1), bLayoutRTL);
aCellBtn.setPopupLeft(false); // DataPilot popup is always right-aligned for now
aCellBtn.setDrawBaseButton(pInfo->bPivotButton);
aCellBtn.setDrawPopupButton(pInfo->bPivotPopupButton);
aCellBtn.setDrawPopupButtonMulti(pInfo->bPivotPopupButtonMulti);
aCellBtn.setDrawToggleButton(bDrawToggle, pInfo->bPivotCollapseButton, nIndent);
aCellBtn.setHasHiddenMember(pInfo->bFilterActive);
aCellBtn.draw();
}
}
if ( !comphelper::LibreOfficeKit::isActive() && bListValButton && pRowInfo[nArrY].nRowNo == aListValPos.Row() && pRowInfo[nArrY].bChanged )
{
tools::Rectangle aRect = GetListValButtonRect( aListValPos );
aComboButton.SetPosPixel( aRect.TopLeft() );
aComboButton.SetSizePixel( aRect.GetSize() );
pContentDev->SetClipRegion(vcl::Region(aRect));
aComboButton.Draw();
pContentDev->SetClipRegion(); // always called from Draw() without clip region
aComboButton.SetPosPixel( aOldPos ); // restore old state
aComboButton.SetSizePixel( aOldSize ); // for MouseUp/Down (AutoFilter)
}
}
pQueryParam.reset();
aComboButton.SetOutputDevice( GetOutDev() );
}
tools::Rectangle ScGridWindow::GetListValButtonRect( const ScAddress& rButtonPos )
{
ScDocument& rDoc = mrViewData.GetDocument();
SCTAB nTab = mrViewData.GetTabNo();
bool bLayoutRTL = rDoc.IsLayoutRTL( nTab );
tools::Long nLayoutSign = bLayoutRTL ? -1 : 1;
ScDDComboBoxButton aButton( GetOutDev() ); // for optimal size
Size aBtnSize = aButton.GetSizePixel();
SCCOL nCol = rButtonPos.Col();
SCROW nRow = rButtonPos.Row();
tools::Long nCellSizeX; // width of this cell, including merged
tools::Long nDummy;
mrViewData.GetMergeSizePixel( nCol, nRow, nCellSizeX, nDummy );
// for height, only the cell's row is used, excluding merged cells
tools::Long nCellSizeY = ScViewData::ToPixel( rDoc.GetRowHeight( nRow, nTab ), mrViewData.GetPPTY() );
tools::Long nAvailable = nCellSizeX;
// left edge of next cell if there is a non-hidden next column
SCCOL nNextCol = nCol + 1;
const ScMergeAttr* pMerge = rDoc.GetAttr( nCol,nRow,nTab, ATTR_MERGE );
if ( pMerge->GetColMerge() > 1 )
nNextCol = nCol + pMerge->GetColMerge(); // next cell after the merged area
while ( nNextCol <= rDoc.MaxCol() && rDoc.ColHidden(nNextCol, nTab) )
++nNextCol;
bool bNextCell = ( nNextCol <= rDoc.MaxCol() );
if ( bNextCell )
nAvailable = ScViewData::ToPixel( rDoc.GetColWidth( nNextCol, nTab ), mrViewData.GetPPTX() );
if ( nAvailable < aBtnSize.Width() )
aBtnSize.setWidth( nAvailable );
if ( nCellSizeY < aBtnSize.Height() )
aBtnSize.setHeight( nCellSizeY );
Point aPos = mrViewData.GetScrPos( nCol, nRow, eWhich, true );
aPos.AdjustX(nCellSizeX * nLayoutSign ); // start of next cell
if (!bNextCell)
aPos.AdjustX( -(aBtnSize.Width() * nLayoutSign) ); // right edge of cell if next cell not available
aPos.AdjustY(nCellSizeY - aBtnSize.Height() );
// X remains at the left edge
if ( bLayoutRTL )
aPos.AdjustX( -(aBtnSize.Width()-1) ); // align right edge of button with cell border
return tools::Rectangle( aPos, aBtnSize );
}
bool ScGridWindow::IsAutoFilterActive( SCCOL nCol, SCROW nRow, SCTAB nTab )
{
ScDocument& rDoc = mrViewData.GetDocument();
ScDBData* pDBData = rDoc.GetDBAtCursor( nCol, nRow, nTab, ScDBDataPortion::AREA );
ScQueryParam aQueryParam;
if ( pDBData )
pDBData->GetQueryParam( aQueryParam );
else
{
OSL_FAIL("Auto filter button without DBData");
}
bool bSimpleQuery = true;
bool bColumnFound = false;
SCSIZE nQuery;
if ( !aQueryParam.bInplace )
bSimpleQuery = false;
// aQueryParam can only include MAXQUERY entries
SCSIZE nCount = aQueryParam.GetEntryCount();
for (nQuery = 0; nQuery < nCount && bSimpleQuery; ++nQuery)
if ( aQueryParam.GetEntry(nQuery).bDoQuery )
{
if (aQueryParam.GetEntry(nQuery).nField == nCol)
bColumnFound = true;
if (nQuery > 0)
if (aQueryParam.GetEntry(nQuery).eConnect != SC_AND)
bSimpleQuery = false;
}
return ( bSimpleQuery && bColumnFound );
}
void ScGridWindow::GetSelectionRects( ::std::vector< tools::Rectangle >& rPixelRects ) const
{
GetPixelRectsFor( mrViewData.GetMarkData(), rPixelRects );
}
void ScGridWindow::GetSelectionRectsPrintTwips(::std::vector< tools::Rectangle >& rRects) const
{
GetRectsAnyFor(mrViewData.GetMarkData(), rRects, true);
}
/// convert rMarkData into pixel rectangles for this view
void ScGridWindow::GetPixelRectsFor( const ScMarkData &rMarkData,
::std::vector< tools::Rectangle >& rPixelRects ) const
{
GetRectsAnyFor(rMarkData, rPixelRects, false);
}
void ScGridWindow::GetRectsAnyFor(const ScMarkData &rMarkData,
::std::vector< tools::Rectangle >& rRects,
bool bInPrintTwips) const
{
ScDocument& rDoc = mrViewData.GetDocument();
SCTAB nTab = mrViewData.GetTabNo();
double nPPTX = mrViewData.GetPPTX();
double nPPTY = mrViewData.GetPPTY();
bool bLayoutRTL = rDoc.IsLayoutRTL( nTab );
// LOK clients needs exact document coordinates, so don't horizontally mirror them.
tools::Long nLayoutSign = (!comphelper::LibreOfficeKit::isActive() && bLayoutRTL) ? -1 : 1;
ScMarkData aMultiMark( rMarkData );
aMultiMark.SetMarking( false );
if (!aMultiMark.IsMultiMarked())
{
// simple range case - simplify calculation
const ScRange& aSimpleRange = aMultiMark.GetMarkArea();
aMultiMark.MarkToMulti();
if ( !aMultiMark.IsMultiMarked() )
return;
SCCOL nX1 = aSimpleRange.aStart.Col();
SCROW nY1 = aSimpleRange.aStart.Row();
SCCOL nX2 = aSimpleRange.aEnd.Col();
SCROW nY2 = aSimpleRange.aEnd.Row();
PutInOrder( nX1, nX2 );
PutInOrder( nY1, nY2 );
SCCOL nPosX = mrViewData.GetPosX( eHWhich );
SCROW nPosY = mrViewData.GetPosY( eVWhich );
// is the selection visible at all?
if (nX2 < nPosX || nY2 < nPosY)
return;
Point aScrStartPos = bInPrintTwips ? mrViewData.GetPrintTwipsPos(nX1, nY1) :
mrViewData.GetScrPos(nX1, nY1, eWhich);
tools::Long nStartX = aScrStartPos.X();
tools::Long nStartY = aScrStartPos.Y();
Point aScrEndPos = bInPrintTwips ? mrViewData.GetPrintTwipsPos(nX2, nY2) :
mrViewData.GetScrPos(nX2, nY2, eWhich);
tools::Long nWidthTwips = rDoc.GetColWidth(nX2, nTab);
const tools::Long nWidth = bInPrintTwips ?
nWidthTwips : ScViewData::ToPixel(nWidthTwips, nPPTX);
tools::Long nEndX = aScrEndPos.X() + (nWidth - 1) * nLayoutSign;
sal_uInt16 nHeightTwips = rDoc.GetRowHeight( nY2, nTab );
const tools::Long nHeight = bInPrintTwips ?
nHeightTwips : ScViewData::ToPixel(nHeightTwips, nPPTY);
tools::Long nEndY = aScrEndPos.Y() + nHeight - 1;
ScInvertMerger aInvert( &rRects );
aInvert.AddRect( tools::Rectangle( nStartX, nStartY, nEndX, nEndY ) );
return;
}
aMultiMark.MarkToMulti();
if ( !aMultiMark.IsMultiMarked() )
return;
const ScRange& aMultiRange = aMultiMark.GetMultiMarkArea();
SCCOL nX1 = aMultiRange.aStart.Col();
SCROW nY1 = aMultiRange.aStart.Row();
SCCOL nX2 = aMultiRange.aEnd.Col();
SCROW nY2 = aMultiRange.aEnd.Row();
PutInOrder( nX1, nX2 );
PutInOrder( nY1, nY2 );
SCCOL nTestX2 = nX2;
SCROW nTestY2 = nY2;
rDoc.ExtendMerge( nX1,nY1, nTestX2,nTestY2, nTab );
SCCOL nPosX = mrViewData.GetPosX( eHWhich );
SCROW nPosY = mrViewData.GetPosY( eVWhich );
// is the selection visible at all?
if (nTestX2 < nPosX || nTestY2 < nPosY)
return;
SCCOL nRealX1 = nX1;
if (nX1 < nPosX)
nX1 = nPosX;
if (nY1 < nPosY)
nY1 = nPosY;
if (!comphelper::LibreOfficeKit::isActive())
{
// limit the selection to only what is visible on the screen
SCCOL nXRight = nPosX + mrViewData.VisibleCellsX(eHWhich);
if (nXRight > rDoc.MaxCol())
nXRight = rDoc.MaxCol();
SCROW nYBottom = nPosY + mrViewData.VisibleCellsY(eVWhich);
if (nYBottom > rDoc.MaxRow())
nYBottom = rDoc.MaxRow();
// is the selection visible at all?
if (nX1 > nXRight || nY1 > nYBottom)
return;
if (nX2 > nXRight)
nX2 = nXRight;
if (nY2 > nYBottom)
nY2 = nYBottom;
}
else
{
SCCOL nMaxTiledCol;
SCROW nMaxTiledRow;
rDoc.GetTiledRenderingArea(nTab, nMaxTiledCol, nMaxTiledRow);
if (nX2 > nMaxTiledCol)
nX2 = nMaxTiledCol;
if (nY2 > nMaxTiledRow)
nY2 = nMaxTiledRow;
}
ScInvertMerger aInvert( &rRects );
Point aScrPos = bInPrintTwips ? mrViewData.GetPrintTwipsPos(nX1, nY1) :
mrViewData.GetScrPos(nX1, nY1, eWhich);
tools::Long nScrY = aScrPos.Y();
bool bWasHidden = false;
for (SCROW nY=nY1; nY<=nY2; nY++)
{
bool bFirstRow = ( nY == nPosY ); // first visible row?
bool bDoHidden = false; // repeat hidden ?
sal_uInt16 nHeightTwips = rDoc.GetRowHeight( nY,nTab );
bool bDoRow = ( nHeightTwips != 0 );
if (bDoRow)
{
if (bWasHidden) // test hidden merge
{
bDoHidden = true;
bDoRow = true;
}
bWasHidden = false;
}
else
{
bWasHidden = true;
if (nY==nY2)
bDoRow = true; // last cell of the block
}
if ( bDoRow )
{
SCCOL nLoopEndX = nX2;
if (nX2 < nX1) // the rest of the merge
{
SCCOL nStartX = nX1;
while ( rDoc.GetAttr(nStartX,nY,nTab,ATTR_MERGE_FLAG)->IsHorOverlapped() )
--nStartX;
if (nStartX <= nX2)
nLoopEndX = nX1;
}
const tools::Long nHeight = bInPrintTwips ?
nHeightTwips : ScViewData::ToPixel(nHeightTwips, nPPTY);
tools::Long nEndY = nScrY + nHeight - 1;
tools::Long nScrX = aScrPos.X();
for (SCCOL nX=nX1; nX<=nLoopEndX; nX++)
{
tools::Long nWidth = rDoc.GetColWidth(nX, nTab);
if (!bInPrintTwips)
nWidth = ScViewData::ToPixel(nWidth, nPPTX);
if ( nWidth > 0 )
{
tools::Long nEndX = nScrX + ( nWidth - 1 ) * nLayoutSign;
SCROW nThisY = nY;
const ScPatternAttr* pPattern = rDoc.GetPattern( nX, nY, nTab );
const ScMergeFlagAttr* pMergeFlag = &pPattern->GetItem(ATTR_MERGE_FLAG);
if ( pMergeFlag->IsVerOverlapped() && ( bDoHidden || bFirstRow ) )
{
while ( pMergeFlag->IsVerOverlapped() && nThisY > 0 &&
(rDoc.RowHidden(nThisY-1, nTab) || bFirstRow) )
{
--nThisY;
pPattern = rDoc.GetPattern( nX, nThisY, nTab );
pMergeFlag = &pPattern->GetItem(ATTR_MERGE_FLAG);
}
}
// only the rest of the merged is seen ?
SCCOL nThisX = nX;
if ( pMergeFlag->IsHorOverlapped() && nX == nPosX && nX > nRealX1 )
{
while ( pMergeFlag->IsHorOverlapped() )
{
--nThisX;
pPattern = rDoc.GetPattern( nThisX, nThisY, nTab );
pMergeFlag = &pPattern->GetItem(ATTR_MERGE_FLAG);
}
}
if ( aMultiMark.IsCellMarked( nThisX, nThisY, true ) )
{
if ( !pMergeFlag->IsOverlapped() )
{
const ScMergeAttr* pMerge = &pPattern->GetItem(ATTR_MERGE);
if (pMerge->GetColMerge() > 0 || pMerge->GetRowMerge() > 0)
{
const SCCOL nEndColMerge = nThisX + pMerge->GetColMerge();
const SCROW nEndRowMerge = nThisY + pMerge->GetRowMerge();
Point aEndPos = bInPrintTwips ?
mrViewData.GetPrintTwipsPos(nEndColMerge, nEndRowMerge) :
mrViewData.GetScrPos(nEndColMerge, nEndRowMerge, eWhich);
if ( aEndPos.X() * nLayoutSign > nScrX * nLayoutSign && aEndPos.Y() > nScrY )
{
aInvert.AddRect( tools::Rectangle( nScrX,nScrY,
aEndPos.X()-nLayoutSign,aEndPos.Y()-1 ) );
}
}
else if ( nEndX * nLayoutSign >= nScrX * nLayoutSign && nEndY >= nScrY )
{
aInvert.AddRect( tools::Rectangle( nScrX,nScrY,nEndX,nEndY ) );
}
}
}
nScrX = nEndX + nLayoutSign;
}
}
nScrY = nEndY + 1;
}
}
}
void ScGridWindow::DataChanged( const DataChangedEvent& rDCEvt )
{
Window::DataChanged(rDCEvt);
if ( !((rDCEvt.GetType() == DataChangedEventType::PRINTER) ||
(rDCEvt.GetType() == DataChangedEventType::DISPLAY) ||
(rDCEvt.GetType() == DataChangedEventType::FONTS) ||
(rDCEvt.GetType() == DataChangedEventType::FONTSUBSTITUTION) ||
((rDCEvt.GetType() == DataChangedEventType::SETTINGS) &&
(rDCEvt.GetFlags() & AllSettingsFlags::STYLE))) )
return;
if ( rDCEvt.GetType() == DataChangedEventType::FONTS && eWhich == mrViewData.GetActivePart() )
mrViewData.GetDocShell()->UpdateFontList();
if ( (rDCEvt.GetType() == DataChangedEventType::SETTINGS) &&
(rDCEvt.GetFlags() & AllSettingsFlags::STYLE) )
{
if ( eWhich == mrViewData.GetActivePart() ) // only once for the view
{
ScTabView* pView = mrViewData.GetView();
pView->RecalcPPT();
// RepeatResize in case scroll bar sizes have changed
pView->RepeatResize();
pView->UpdateAllOverlays();
// invalidate cell attribs in input handler, in case the
// EditEngine BackgroundColor has to be changed
if ( mrViewData.IsActive() )
{
ScInputHandler* pHdl = SC_MOD()->GetInputHdl();
if (pHdl)
pHdl->ForgetLastPattern();
}
}
}
Invalidate();
}
void ScGridWindow::initiatePageBreaks()
{
bInitialPageBreaks = true;
}
IMPL_LINK(ScGridWindow, InitiatePageBreaksTimer, Timer*, pTimer, void)
{
if (pTimer != &maShowPageBreaksTimer)
return;
const ScViewOptions& rOpts = mrViewData.GetOptions();
const bool bPage = rOpts.GetOption(VOPT_PAGEBREAKS);
// tdf#124983, if option LibreOfficeDev Calc/View/Visual Aids/Page
// breaks is enabled, breaks should be visible. If the document is
// opened the first time or a tab is activated the first time, the
// breaks are not calculated yet, so this initialization is done here.
if (bPage)
{
const SCTAB nCurrentTab = mrViewData.GetTabNo();
ScDocument& rDoc = mrViewData.GetDocument();
const Size aPageSize = rDoc.GetPageSize(nCurrentTab);
// Do not attempt to calculate a page size here if it is empty if
// that involves counting pages.
// An earlier implementation did
// ScPrintFunc(pDocSh, pDocSh->GetPrinter(), nCurrentTab);
// rDoc.SetPageSize(nCurrentTab, rDoc.GetPageSize(nCurrentTab));
// which resulted in tremendous waiting times after having loaded
// larger documents i.e. imported from CSV, in which UI is entirely
// blocked. All time is spent under ScPrintFunc::CountPages() in
// ScTable::ExtendPrintArea() in the loop that calls
// MaybeAddExtraColumn() to do stuff for each text string content
// cell (each row in each column). Maybe that can be optimized, or
// obtaining page size without that overhead would be possible, but
// as is calling that from here is a no-no so this is a quick
// disable things.
if (!aPageSize.IsEmpty())
{
ScDocShell* pDocSh = mrViewData.GetDocShell();
const bool bModified = pDocSh->IsModified();
// Even setting the same size sets page size valid, so
// UpdatePageBreaks() actually does something.
rDoc.SetPageSize( nCurrentTab, aPageSize);
rDoc.UpdatePageBreaks(nCurrentTab);
pDocSh->PostPaint(0, 0, nCurrentTab, rDoc.MaxCol(), rDoc.MaxRow(), nCurrentTab, PaintPartFlags::Grid);
pDocSh->SetModified(bModified);
}
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1048 The 'bDoRow' variable was assigned the same value.