/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <sfx2/dispatch.hxx>
#include <vcl/commandevent.hxx>
#include <vcl/help.hxx>
#include <vcl/settings.hxx>
#include <svtools/colorcfg.hxx>
#include <osl/diagnose.h>
#include <tabvwsh.hxx>
#include <hdrcont.hxx>
#include <dbdata.hxx>
#include <scmod.hxx>
#include <inputopt.hxx>
#include <gridmerg.hxx>
#include <document.hxx>
#include <markdata.hxx>
#include <tabview.hxx>
#include <viewdata.hxx>
#include <columnspanset.hxx>
#include <officecfg/Office/Common.hxx>
#define SC_DRAG_MIN 2
// passes in paint
// (selection left/right must be first because the continuous lines
// are partly overwritten later)
#define SC_HDRPAINT_SEL_BOTTOM 4
#define SC_HDRPAINT_BOTTOM 5
#define SC_HDRPAINT_TEXT 6
#define SC_HDRPAINT_COUNT 7
ScHeaderControl::ScHeaderControl( vcl::Window* pParent, SelectionEngine* pSelectionEngine,
SCCOLROW nNewSize, bool bNewVertical, ScTabView* pTab ) :
Window ( pParent ),
pSelEngine ( pSelectionEngine ),
aShowHelpTimer("sc HeaderControl Popover Timer"),
bVertical ( bNewVertical ),
nSize ( nNewSize ),
nMarkStart ( 0 ),
nMarkEnd ( 0 ),
bMarkRange ( false ),
bDragging ( false ),
nDragNo ( 0 ),
nDragStart ( 0 ),
nDragPos ( 0 ),
nTipVisible ( nullptr ),
bDragMoved ( false ),
bIgnoreMove ( false ),
bInRefMode ( false ),
pTabView ( pTab )
{
// RTL: no default mirroring for this window, the spreadsheet itself
// is also not mirrored
// mirror the vertical window for correct border drawing
// table layout depends on sheet format, not UI setting, so the
// borders of the vertical window have to be handled manually, too.
EnableRTL( false );
aNormFont = GetFont();
aNormFont.SetTransparent( true ); //! hard-set WEIGHT_NORMAL ???
aBoldFont = aNormFont;
aBoldFont.SetWeight( WEIGHT_BOLD );
aAutoFilterFont = aNormFont;
SetFont(aBoldFont);
bBoldSet = true;
bAutoFilterSet = false;
Size aSize = LogicToPixel( Size(
GetTextWidth(u"8888"_ustr),
GetTextHeight() ) );
aSize.AdjustWidth(4 ); // place for highlight border
aSize.AdjustHeight(3 );
SetSizePixel( aSize );
nWidth = nSmallWidth = aSize.Width();
nBigWidth = LogicToPixel( Size( GetTextWidth(u"8888888"_ustr), 0 ) ).Width() + 5;
aShowHelpTimer.SetInvokeHandler(LINK(this, ScHeaderControl, ShowDragHelpHdl));
aShowHelpTimer.SetTimeout(GetSettings().GetMouseSettings().GetDoubleClickTime());
SetBackground();
}
void ScHeaderControl::dispose()
{
aShowHelpTimer.Stop();
vcl::Window::dispose();
}
void ScHeaderControl::SetWidth( tools::Long nNew )
{
OSL_ENSURE( bVertical, "SetWidth works only on row headers" );
if ( nNew != nWidth )
{
Size aSize( nNew, GetSizePixel().Height() );
SetSizePixel( aSize );
nWidth = nNew;
Invalidate();
}
}
ScHeaderControl::~ScHeaderControl()
{
}
void ScHeaderControl::DoPaint( SCCOLROW nStart, SCCOLROW nEnd )
{
bool bLayoutRTL = IsLayoutRTL();
tools::Long nLayoutSign = bLayoutRTL ? -1 : 1;
tools::Rectangle aRect( Point(0,0), GetOutputSizePixel() );
if ( bVertical )
{
aRect.SetTop( GetScrPos( nStart )-nLayoutSign ); // extra pixel for line at top of selection
aRect.SetBottom( GetScrPos( nEnd+1 )-nLayoutSign );
}
else
{
aRect.SetLeft( GetScrPos( nStart )-nLayoutSign ); // extra pixel for line left of selection
aRect.SetRight( GetScrPos( nEnd+1 )-nLayoutSign );
}
Invalidate(aRect);
}
void ScHeaderControl::SetMark( bool bNewSet, SCCOLROW nNewStart, SCCOLROW nNewEnd )
{
bool bEnabled = SC_MOD()->GetInputOptions().GetMarkHeader(); //! cache?
if (!bEnabled)
bNewSet = false;
bool bOldSet = bMarkRange;
SCCOLROW nOldStart = nMarkStart;
SCCOLROW nOldEnd = nMarkEnd;
PutInOrder( nNewStart, nNewEnd );
bMarkRange = bNewSet;
nMarkStart = nNewStart;
nMarkEnd = nNewEnd;
// Paint
if ( bNewSet )
{
if ( bOldSet )
{
if ( nNewStart == nOldStart )
{
if ( nNewEnd != nOldEnd )
DoPaint( std::min( nNewEnd, nOldEnd ) + 1, std::max( nNewEnd, nOldEnd ) );
}
else if ( nNewEnd == nOldEnd )
DoPaint( std::min( nNewStart, nOldStart ), std::max( nNewStart, nOldStart ) - 1 );
else if ( nNewStart > nOldEnd || nNewEnd < nOldStart )
{
// two areas
DoPaint( nOldStart, nOldEnd );
DoPaint( nNewStart, nNewEnd );
}
else // somehow overlapping... (it is not often)
DoPaint( std::min( nNewStart, nOldStart ), std::max( nNewEnd, nOldEnd ) );
}
else
DoPaint( nNewStart, nNewEnd ); // completely new selection
}
else if ( bOldSet )
DoPaint( nOldStart, nOldEnd ); // cancel selection
}
tools::Long ScHeaderControl::GetScrPos( SCCOLROW nEntryNo ) const
{
tools::Long nScrPos;
tools::Long nMax = ( bVertical ? GetOutputSizePixel().Height() : GetOutputSizePixel().Width() ) + 1;
if (nEntryNo >= nSize)
nScrPos = nMax;
else
{
nScrPos = 0;
for (SCCOLROW i=GetPos(); i<nEntryNo && nScrPos<nMax; i++)
{
sal_uInt16 nAdd = GetEntrySize(i);
if (nAdd)
nScrPos += nAdd;
else
{
SCCOLROW nHidden = GetHiddenCount(i);
if (nHidden > 0)
i += nHidden - 1;
}
}
}
if ( IsLayoutRTL() )
nScrPos = nMax - nScrPos - 2;
return nScrPos;
}
void ScHeaderControl::Paint( vcl::RenderContext& /*rRenderContext*/, const tools::Rectangle& rRect )
{
// It is important for VCL to have few calls, that is why the outer lines are
// grouped together
const StyleSettings& rStyleSettings = GetSettings().GetStyleSettings();
bool bHighContrast = rStyleSettings.GetHighContrastMode();
bool bDark = rStyleSettings.GetFaceColor().IsDark();
// Use the same distinction for bDark as in Window::DrawSelectionBackground
Color aTextColor = rStyleSettings.GetButtonTextColor();
Color aSelTextColor = rStyleSettings.GetHighlightTextColor();
Color aAFilterTextColor = rStyleSettings.GetButtonTextColor();
aAFilterTextColor.Merge(COL_LIGHTBLUE, bDark ? 150 : 10); // color of filtered row numbers
aNormFont.SetColor( aTextColor );
aAutoFilterFont.SetColor(aAFilterTextColor);
if ( bHighContrast )
aBoldFont.SetColor( aTextColor );
else
aBoldFont.SetColor( aSelTextColor );
if (bAutoFilterSet)
SetTextColor(aAFilterTextColor);
else
SetTextColor((bBoldSet && !bHighContrast) ? aSelTextColor : aTextColor);
Color aSelLineColor = SC_MOD()->GetColorConfig().GetColorValue(svtools::CALCCELLFOCUS).nColor;
aSelLineColor.Merge( COL_BLACK, 0xe0 ); // darken just a little bit
bool bLayoutRTL = IsLayoutRTL();
tools::Long nLayoutSign = bLayoutRTL ? -1 : 1;
bool bMirrored = IsMirrored();
OUString aString;
sal_uInt16 nBarSize;
Point aScrPos;
Size aTextSize;
if (bVertical)
nBarSize = static_cast<sal_uInt16>(GetSizePixel().Width());
else
nBarSize = static_cast<sal_uInt16>(GetSizePixel().Height());
SCCOLROW nPos = GetPos();
tools::Long nPStart = bVertical ? rRect.Top() : rRect.Left();
tools::Long nPEnd = bVertical ? rRect.Bottom() : rRect.Right();
tools::Long nTransStart = nPEnd + 1;
tools::Long nTransEnd = 0;
tools::Long nInitScrPos = 0;
if ( bLayoutRTL )
{
std::swap(nPStart, nPEnd);
std::swap(nTransStart, nTransEnd);
if ( bVertical ) // start loops from the end
nInitScrPos = GetSizePixel().Height() - 1;
else
nInitScrPos = GetSizePixel().Width() - 1;
}
// complete the painting of the outer lines
// first find the end of the last cell
tools::Long nLineEnd = nInitScrPos - nLayoutSign;
for (SCCOLROW i=nPos; i<nSize; i++)
{
sal_uInt16 nSizePix = GetEntrySize( i );
if (nSizePix)
{
nLineEnd += nSizePix * nLayoutSign;
if ( bMarkRange && i >= nMarkStart && i <= nMarkEnd )
{
tools::Long nLineStart = nLineEnd - ( nSizePix - 1 ) * nLayoutSign;
if ( nLineStart * nLayoutSign < nTransStart * nLayoutSign )
nTransStart = nLineStart;
if ( nLineEnd * nLayoutSign > nTransEnd * nLayoutSign )
nTransEnd = nLineEnd;
}
if ( nLineEnd * nLayoutSign > nPEnd * nLayoutSign )
{
nLineEnd = nPEnd;
break;
}
}
else
{
SCCOLROW nHidden = GetHiddenCount(i);
if (nHidden > 0)
i += nHidden - 1;
}
}
// background is different for entry area and behind the entries
tools::Rectangle aFillRect;
GetOutDev()->SetLineColor();
if ( nLineEnd * nLayoutSign >= nInitScrPos * nLayoutSign )
{
Color aFaceColor(rStyleSettings.GetFaceColor());
if (bDark)
aFaceColor.IncreaseLuminance(20);
else
aFaceColor.DecreaseLuminance(20);
GetOutDev()->SetFillColor( aFaceColor );
if ( bVertical )
aFillRect = tools::Rectangle( 0, nInitScrPos, nBarSize-1, nLineEnd );
else
aFillRect = tools::Rectangle( nInitScrPos, 0, nLineEnd, nBarSize-1 );
GetOutDev()->DrawRect( aFillRect );
}
if ( nLineEnd * nLayoutSign < nPEnd * nLayoutSign )
{
GetOutDev()->SetFillColor( SC_MOD()->GetColorConfig().GetColorValue(svtools::APPBACKGROUND).nColor );
if ( bVertical )
aFillRect = tools::Rectangle( 0, nLineEnd+nLayoutSign, nBarSize-1, nPEnd );
else
aFillRect = tools::Rectangle( nLineEnd+nLayoutSign, 0, nPEnd, nBarSize-1 );
GetOutDev()->DrawRect( aFillRect );
}
if ( nLineEnd * nLayoutSign >= nPStart * nLayoutSign )
{
if ( nTransEnd * nLayoutSign >= nTransStart * nLayoutSign )
{
if (bVertical)
aFillRect = tools::Rectangle( 0, nTransStart, nBarSize-1, nTransEnd );
else
aFillRect = tools::Rectangle( nTransStart, 0, nTransEnd, nBarSize-1 );
if ( bHighContrast )
{
if ( bDark )
{
// solid grey background for dark face color is drawn before lines
GetOutDev()->SetLineColor();
GetOutDev()->SetFillColor( COL_LIGHTGRAY );
GetOutDev()->DrawRect( aFillRect );
}
}
else
{
// background for selection
GetOutDev()->SetLineColor();
Color aColor = SC_MOD()->GetColorConfig().GetColorValue(svtools::CALCCELLFOCUS).nColor;
// merging the highlightcolor (which is used if accent does not exist) with the background
// fails in many cases such as Breeze Dark (highlight is too close to background) and
// Breeze Light (font color is white and not readable anymore)
#ifdef MACOSX
aColor.Merge( rStyleSettings.GetFaceColor(), 80 );
#endif
GetOutDev()->SetFillColor( aColor );
GetOutDev()->DrawRect( aFillRect );
}
}
GetOutDev()->SetLineColor( rStyleSettings.GetShadowColor() );
if (bVertical)
{
GetOutDev()->DrawLine( Point( 0, nPStart ), Point( 0, nLineEnd ) ); //left
GetOutDev()->DrawLine( Point( nBarSize-1, nPStart ), Point( nBarSize-1, nLineEnd ) ); //right
}
else
{
GetOutDev()->DrawLine( Point( nPStart, nBarSize-1 ), Point( nLineEnd, nBarSize-1 ) ); //bottom
GetOutDev()->DrawLine( Point( nPStart, 0 ), Point( nLineEnd, 0 ) ); //top
}
}
// tdf#89841 Use blue row numbers when Autofilter selected
std::vector<sc::ColRowSpan> aSpans;
if (bVertical && pTabView)
{
SCTAB nTab = pTabView->GetViewData().GetTabNo();
ScDocument& rDoc = pTabView->GetViewData().GetDocument();
ScDBData* pDBData = rDoc.GetAnonymousDBData(nTab);
if (pDBData && pDBData->HasAutoFilter())
{
SCSIZE nSelected = 0;
SCSIZE nTotal = 0;
pDBData->GetFilterSelCount(nSelected, nTotal);
if (nTotal > nSelected)
{
ScRange aRange;
pDBData->GetArea(aRange);
SCCOLROW nStartRow = static_cast<SCCOLROW>(aRange.aStart.Row());
SCCOLROW nEndRow = static_cast<SCCOLROW>(aRange.aEnd.Row());
if (pDBData->HasHeader())
nStartRow++;
aSpans.push_back(sc::ColRowSpan(nStartRow, nEndRow));
}
}
ScDBCollection* pDocColl = rDoc.GetDBCollection();
if (!pDocColl->empty())
{
ScDBCollection::NamedDBs& rDBs = pDocColl->getNamedDBs();
for (const auto& rxDB : rDBs)
{
if (rxDB->GetTab() == nTab && rxDB->HasAutoFilter())
{
SCSIZE nSelected = 0;
SCSIZE nTotal = 0;
rxDB->GetFilterSelCount(nSelected, nTotal);
if (nTotal > nSelected)
{
ScRange aRange;
rxDB->GetArea(aRange);
SCCOLROW nStartRow = static_cast<SCCOLROW>(aRange.aStart.Row());
SCCOLROW nEndRow = static_cast<SCCOLROW>(aRange.aEnd.Row());
if (rxDB->HasHeader())
nStartRow++;
aSpans.push_back(sc::ColRowSpan(nStartRow, nEndRow));
}
}
}
}
}
// loop through entries several times to avoid changing the line color too often
// and to allow merging of lines
ScGridMerger aGrid( GetOutDev(), 1, 1 );
// start at SC_HDRPAINT_BOTTOM instead of 0 - selection doesn't get different
// borders, light border at top isn't used anymore
// use SC_HDRPAINT_SEL_BOTTOM for different color
for (sal_uInt16 nPass = SC_HDRPAINT_SEL_BOTTOM; nPass < SC_HDRPAINT_COUNT; nPass++)
{
// set line color etc. before entry loop
switch ( nPass )
{
case SC_HDRPAINT_SEL_BOTTOM:
// same as non-selected for high contrast
GetOutDev()->SetLineColor( bHighContrast ? rStyleSettings.GetShadowColor() : aSelLineColor );
break;
case SC_HDRPAINT_BOTTOM:
GetOutDev()->SetLineColor( rStyleSettings.GetShadowColor() );
break;
case SC_HDRPAINT_TEXT:
// DrawSelectionBackground is used only for high contrast on light background
if ( nTransEnd * nLayoutSign >= nTransStart * nLayoutSign && bHighContrast && !bDark )
{
// Transparent selection background is drawn after lines, before text.
// Use DrawSelectionBackground to make sure there is a visible
// difference. The case of a dark face color, where DrawSelectionBackground
// would just paint over the lines, is handled separately (bDark).
// Otherwise, GetHighlightColor is used with 80% transparency.
// The window's background color (SetBackground) has to be the background
// of the cell area, for the contrast comparison in DrawSelectionBackground.
tools::Rectangle aTransRect;
if (bVertical)
aTransRect = tools::Rectangle( 0, nTransStart, nBarSize-1, nTransEnd );
else
aTransRect = tools::Rectangle( nTransStart, 0, nTransEnd, nBarSize-1 );
SetBackground( rStyleSettings.GetFaceColor() );
DrawSelectionBackground( aTransRect, 0, true, false );
SetBackground();
}
break;
}
SCCOLROW nCount=0;
tools::Long nScrPos=nInitScrPos;
do
{
if (bVertical)
aScrPos = Point( 0, nScrPos );
else
aScrPos = Point( nScrPos, 0 );
SCCOLROW nEntryNo = nCount + nPos;
if ( nEntryNo >= nSize ) // rDoc.MaxCol()/rDoc.MaxRow()
nScrPos = nPEnd + nLayoutSign; // beyond nPEnd -> stop
else
{
sal_uInt16 nSizePix = GetEntrySize( nEntryNo );
if (nSizePix == 0)
{
SCCOLROW nHidden = GetHiddenCount(nEntryNo);
if (nHidden > 0)
nCount += nHidden - 1;
}
else if ((nScrPos+nSizePix*nLayoutSign)*nLayoutSign >= nPStart*nLayoutSign)
{
Point aEndPos(aScrPos);
if (bVertical)
aEndPos = Point( aScrPos.X()+nBarSize-1, aScrPos.Y()+(nSizePix-1)*nLayoutSign );
else
aEndPos = Point( aScrPos.X()+(nSizePix-1)*nLayoutSign, aScrPos.Y()+nBarSize-1 );
bool bMark = bMarkRange && nEntryNo >= nMarkStart && nEntryNo <= nMarkEnd;
bool bNextToMark = bMarkRange && nEntryNo + 1 >= nMarkStart && nEntryNo <= nMarkEnd;
switch ( nPass )
{
case SC_HDRPAINT_SEL_BOTTOM:
case SC_HDRPAINT_BOTTOM:
if ( nPass == ( bNextToMark ? SC_HDRPAINT_SEL_BOTTOM : SC_HDRPAINT_BOTTOM ) )
{
if (bVertical)
aGrid.AddHorLine(/* here we work in pixels */ true, aScrPos.X(), aEndPos.X(), aEndPos.Y());
else
aGrid.AddVerLine(/* here we work in pixels */ true, aEndPos.X(), aScrPos.Y(), aEndPos.Y());
// thick bottom for hidden rows
// (drawn directly, without aGrid)
if ( nEntryNo+1 < nSize )
if ( GetEntrySize(nEntryNo+1)==0 )
{
if (bVertical)
GetOutDev()->DrawLine( Point(aScrPos.X(),aEndPos.Y()-nLayoutSign),
Point(aEndPos.X(),aEndPos.Y()-nLayoutSign) );
else
GetOutDev()->DrawLine( Point(aEndPos.X()-nLayoutSign,aScrPos.Y()),
Point(aEndPos.X()-nLayoutSign,aEndPos.Y()) );
}
}
break;
case SC_HDRPAINT_TEXT:
if ( nSizePix > 1 ) // minimal check for small columns/rows
{
if (bVertical)
{
bool bAutoFilterPos = false;
for (const auto& rSpan : aSpans)
{
if (nEntryNo >= rSpan.mnStart && nEntryNo <= rSpan.mnEnd)
{
bAutoFilterPos = true;
break;
}
}
if (bMark != bBoldSet || bAutoFilterPos != bAutoFilterSet)
{
if (bMark)
SetFont(aBoldFont);
else if (bAutoFilterPos)
SetFont(aAutoFilterFont);
else
SetFont(aNormFont);
bBoldSet = bMark;
bAutoFilterSet = bAutoFilterPos && !bMark;
}
}
else
{
if (bMark != bBoldSet)
{
if (bMark)
SetFont(aBoldFont);
else
SetFont(aNormFont);
bBoldSet = bMark;
}
}
aString = GetEntryText( nEntryNo );
aTextSize.setWidth( GetTextWidth( aString ) );
aTextSize.setHeight( GetTextHeight() );
Point aTxtPos(aScrPos);
if (bVertical)
{
aTxtPos.AdjustX((nBarSize-aTextSize.Width())/2 );
aTxtPos.AdjustY((nSizePix*nLayoutSign-aTextSize.Height())/2 );
if ( bMirrored )
aTxtPos.AdjustX(1 ); // dark border is left instead of right
}
else
{
aTxtPos.AdjustX((nSizePix*nLayoutSign-aTextSize.Width()+1)/2 );
aTxtPos.AdjustY((nBarSize-aTextSize.Height())/2 );
}
GetOutDev()->DrawText( aTxtPos, aString );
}
break;
}
// when selecting the complete row/column:
// InvertRect( Rectangle( aScrPos, aEndPos ) );
}
nScrPos += nSizePix * nLayoutSign; // also if before the visible area
}
++nCount;
}
while ( nScrPos * nLayoutSign <= nPEnd * nLayoutSign );
aGrid.Flush();
}
}
SCCOLROW ScHeaderControl::GetMousePos(const Point& rPos, bool& rBorder) const
{
bool bFound = false;
SCCOLROW nPos = GetPos();
SCCOLROW nHitNo = nPos;
SCCOLROW nEntryNo = 1 + nPos;
tools::Long nScrPos;
tools::Long nMousePos = bVertical ? rPos.Y() : rPos.X();
tools::Long nDif;
Size aSize = GetOutputSizePixel();
tools::Long nWinSize = bVertical ? aSize.Height() : aSize.Width();
bool bLayoutRTL = IsLayoutRTL();
tools::Long nLayoutSign = bLayoutRTL ? -1 : 1;
tools::Long nEndPos = bLayoutRTL ? -1 : nWinSize;
nScrPos = GetScrPos( nPos ) - nLayoutSign;
do
{
if (nEntryNo > nSize)
nScrPos = nEndPos + nLayoutSign;
else
nScrPos += GetEntrySize( nEntryNo - 1 ) * nLayoutSign; //! GetHiddenCount() ??
nDif = nMousePos - nScrPos;
if (nDif >= -5 && nDif <= 5)
{
bFound = true;
nHitNo=nEntryNo-1;
}
else if (nDif * nLayoutSign >= 0 && nEntryNo < nSize)
nHitNo = nEntryNo;
++nEntryNo;
}
while ( nScrPos * nLayoutSign < nEndPos * nLayoutSign && nDif * nLayoutSign > 0 );
rBorder = bFound;
return nHitNo;
}
bool ScHeaderControl::IsSelectionAllowed(SCCOLROW nPos) const
{
ScTabViewShell* pViewSh = dynamic_cast<ScTabViewShell*>(SfxViewShell::Current());
if (!pViewSh)
return false;
ScViewData& rViewData = pViewSh->GetViewData();
sal_uInt16 nTab = rViewData.GetTabNo();
ScDocument& rDoc = rViewData.GetDocument();
const ScTableProtection* pProtect = rDoc.GetTabProtection(nTab);
bool bSelectAllowed = true;
if ( pProtect && pProtect->isProtected() )
{
// This sheet is protected. Check if a context menu is allowed on this cell.
bool bCellsProtected = false;
if (bVertical)
{
// row header
SCROW nRPos = static_cast<SCROW>(nPos);
bCellsProtected = rDoc.HasAttrib(0, nRPos, nTab, rDoc.MaxCol(), nRPos, nTab, HasAttrFlags::Protected);
}
else
{
// column header
SCCOL nCPos = static_cast<SCCOL>(nPos);
bCellsProtected = rDoc.HasAttrib(nCPos, 0, nTab, nCPos, rDoc.MaxRow(), nTab, HasAttrFlags::Protected);
}
bool bSelProtected = pProtect->isOptionEnabled(ScTableProtection::SELECT_LOCKED_CELLS);
bool bSelUnprotected = pProtect->isOptionEnabled(ScTableProtection::SELECT_UNLOCKED_CELLS);
if (bCellsProtected)
bSelectAllowed = bSelProtected;
else
bSelectAllowed = bSelUnprotected;
}
return bSelectAllowed;
}
void ScHeaderControl::MouseButtonDown( const MouseEvent& rMEvt )
{
if (IsDisabled())
return;
bIgnoreMove = false;
SelectWindow();
bool bIsBorder;
SCCOLROW nHitNo = GetMousePos(rMEvt.GetPosPixel(), bIsBorder);
if (!IsSelectionAllowed(nHitNo))
return;
if ( ! rMEvt.IsLeft() )
return;
if ( SC_MOD()->IsFormulaMode() )
{
if( !pTabView )
return;
SCTAB nTab = pTabView->GetViewData().GetTabNo();
if( !rMEvt.IsShift() )
pTabView->DoneRefMode( rMEvt.IsMod1() );
ScDocument& rDoc = pTabView->GetViewData().GetDocument();
if( !bVertical )
{
pTabView->InitRefMode( nHitNo, 0, nTab, SC_REFTYPE_REF );
pTabView->UpdateRef( nHitNo, rDoc.MaxRow(), nTab );
}
else
{
pTabView->InitRefMode( 0, nHitNo, nTab, SC_REFTYPE_REF );
pTabView->UpdateRef( rDoc.MaxCol(), nHitNo, nTab );
}
bInRefMode = true;
return;
}
if ( bIsBorder && ResizeAllowed() )
{
nDragNo = nHitNo;
sal_uInt16 nClicks = rMEvt.GetClicks();
if ( nClicks && nClicks%2==0 )
{
SetEntrySize( nDragNo, HDR_SIZE_OPTIMUM );
SetPointer( PointerStyle::Arrow );
}
else
{
if (bVertical)
nDragStart = rMEvt.GetPosPixel().Y();
else
nDragStart = rMEvt.GetPosPixel().X();
nDragPos = nDragStart;
// tdf#140833 launch help tip to show after the double click time has expired
// so under gtk the popover isn't active when the double click is processed
// by gtk because under load on wayland the double click is getting handled
// by something else and getting sent to the window underneath our window
aShowHelpTimer.Start();
DrawInvert( nDragPos );
StartTracking();
bDragging = true;
bDragMoved = false;
}
}
else
{
pSelEngine->SetWindow( this );
tools::Rectangle aVis( Point(), GetOutputSizePixel() );
if (bVertical)
{
aVis.SetLeft( LONG_MIN );
aVis.SetRight( LONG_MAX );
}
else
{
aVis.SetTop( LONG_MIN );
aVis.SetBottom( LONG_MAX );
}
pSelEngine->SetVisibleArea( aVis );
SetMarking( true ); // must precede SelMouseButtonDown
pSelEngine->SelMouseButtonDown( rMEvt );
// In column/row headers a simple click already is a selection.
// -> Call SelMouseMove to ensure CreateAnchor is called (and DestroyAnchor
// if the next click is somewhere else with Control key).
pSelEngine->SelMouseMove( rMEvt );
if (IsMouseCaptured())
{
// tracking instead of CaptureMouse, so it can be cancelled cleanly
//! someday SelectionEngine itself should call StartTracking!?!
ReleaseMouse();
StartTracking();
}
}
}
void ScHeaderControl::MouseButtonUp( const MouseEvent& rMEvt )
{
if ( IsDisabled() )
return;
if ( SC_MOD()->IsFormulaMode() )
{
SC_MOD()->EndReference();
bInRefMode = false;
return;
}
SetMarking( false );
bIgnoreMove = false;
if ( bDragging )
{
DrawInvert( nDragPos );
ReleaseMouse();
HideDragHelp();
bDragging = false;
tools::Long nScrPos = GetScrPos( nDragNo );
tools::Long nMousePos = bVertical ? rMEvt.GetPosPixel().Y() : rMEvt.GetPosPixel().X();
bool bLayoutRTL = IsLayoutRTL();
tools::Long nNewWidth = bLayoutRTL ? ( nScrPos - nMousePos + 1 )
: ( nMousePos + 2 - nScrPos );
if ( nNewWidth < 0 /* && !IsSelected(nDragNo) */ )
{
SCCOLROW nStart = 0;
SCCOLROW nEnd = nDragNo;
while (nNewWidth < 0)
{
nStart = nDragNo;
if (nDragNo>0)
{
--nDragNo;
nNewWidth += GetEntrySize( nDragNo ); //! GetHiddenCount() ???
}
else
nNewWidth = 0;
}
HideEntries( nStart, nEnd );
}
else
{
if (bDragMoved)
SetEntrySize( nDragNo, static_cast<sal_uInt16>(nNewWidth) );
}
}
else
{
pSelEngine->SelMouseButtonUp( rMEvt );
ReleaseMouse();
}
}
void ScHeaderControl::MouseMove( const MouseEvent& rMEvt )
{
if ( IsDisabled() )
{
SetPointer( PointerStyle::Arrow );
return;
}
if ( bInRefMode && rMEvt.IsLeft() && SC_MOD()->IsFormulaMode() )
{
if( !pTabView )
return;
bool bTmp;
SCCOLROW nHitNo = GetMousePos(rMEvt.GetPosPixel(), bTmp);
SCTAB nTab = pTabView->GetViewData().GetTabNo();
ScDocument& rDoc = pTabView->GetViewData().GetDocument();
if( !bVertical )
pTabView->UpdateRef( nHitNo, rDoc.MaxRow(), nTab );
else
pTabView->UpdateRef( rDoc.MaxCol(), nHitNo, nTab );
return;
}
if ( bDragging )
{
tools::Long nNewPos = bVertical ? rMEvt.GetPosPixel().Y() : rMEvt.GetPosPixel().X();
if ( nNewPos != nDragPos )
{
DrawInvert( nDragPos );
nDragPos = nNewPos;
ShowDragHelp();
DrawInvert( nDragPos );
if (nDragPos <= nDragStart-SC_DRAG_MIN || nDragPos >= nDragStart+SC_DRAG_MIN)
bDragMoved = true;
}
}
else
{
bool bIsBorder;
(void)GetMousePos(rMEvt.GetPosPixel(), bIsBorder);
if ( bIsBorder && rMEvt.GetButtons()==0 && ResizeAllowed() )
SetPointer( bVertical ? PointerStyle::VSizeBar : PointerStyle::HSizeBar );
else
SetPointer( PointerStyle::Arrow );
if (!bIgnoreMove)
pSelEngine->SelMouseMove( rMEvt );
}
}
void ScHeaderControl::Tracking( const TrackingEvent& rTEvt )
{
// Distribute the tracking events to the various MouseEvents, because
// SelectionEngine does not know anything about Tracking
if ( rTEvt.IsTrackingCanceled() )
StopMarking();
else if ( rTEvt.IsTrackingEnded() )
MouseButtonUp( rTEvt.GetMouseEvent() );
else
MouseMove( rTEvt.GetMouseEvent() );
}
void ScHeaderControl::Command( const CommandEvent& rCEvt )
{
CommandEventId nCmd = rCEvt.GetCommand();
if ( nCmd == CommandEventId::ContextMenu )
{
StopMarking(); // finish selection / dragging
// execute popup menu
ScTabViewShell* pViewSh = dynamic_cast< ScTabViewShell *>( SfxViewShell::Current() );
if ( pViewSh )
{
if ( rCEvt.IsMouseEvent() )
{
// #i18735# select the column/row under the mouse pointer
ScViewData& rViewData = pViewSh->GetViewData();
SelectWindow(); // also deselects drawing objects, stops draw text edit
if ( rViewData.HasEditView( rViewData.GetActivePart() ) )
SC_MOD()->InputEnterHandler(); // always end edit mode
bool bBorder;
SCCOLROW nPos = GetMousePos(rCEvt.GetMousePosPixel(), bBorder );
if (!IsSelectionAllowed(nPos))
// Selecting this cell is not allowed, neither is context menu.
return;
SCTAB nTab = rViewData.GetTabNo();
ScDocument& rDoc = pViewSh->GetViewData().GetDocument();
ScRange aNewRange;
if ( bVertical )
aNewRange = ScRange( 0, sal::static_int_cast<SCROW>(nPos), nTab,
rDoc.MaxCol(), sal::static_int_cast<SCROW>(nPos), nTab );
else
aNewRange = ScRange( sal::static_int_cast<SCCOL>(nPos), 0, nTab,
sal::static_int_cast<SCCOL>(nPos), rDoc.MaxRow(), nTab );
// see if any part of the range is already selected
ScRangeList aRanges;
rViewData.GetMarkData().FillRangeListWithMarks( &aRanges, false );
bool bSelected = aRanges.Intersects(aNewRange);
// select the range if no part of it was selected
if ( !bSelected )
pViewSh->MarkRange( aNewRange );
}
pViewSh->GetDispatcher()->ExecutePopup( bVertical ? u"rowheader"_ustr : u"colheader"_ustr );
}
}
else if ( nCmd == CommandEventId::StartDrag )
{
pSelEngine->Command( rCEvt );
}
}
void ScHeaderControl::StopMarking()
{
if ( bDragging )
{
DrawInvert( nDragPos );
HideDragHelp();
bDragging = false;
}
SetMarking( false );
bIgnoreMove = true;
// don't call pSelEngine->Reset, so selection across the parts of
// a split/frozen view is possible
if (IsMouseCaptured())
ReleaseMouse();
}
IMPL_LINK_NOARG(ScHeaderControl, ShowDragHelpHdl, Timer*, void)
{
ShowDragHelp();
}
void ScHeaderControl::ShowDragHelp()
{
aShowHelpTimer.Stop();
if (!Help::IsQuickHelpEnabled())
return;
tools::Long nScrPos = GetScrPos( nDragNo );
bool bLayoutRTL = IsLayoutRTL();
tools::Long nVal = bLayoutRTL ? ( nScrPos - nDragPos + 1 )
: ( nDragPos + 2 - nScrPos );
OUString aHelpStr = GetDragHelp( nVal );
Point aPos = OutputToScreenPixel( Point(0,0) );
Size aSize = GetSizePixel();
Point aMousePos = OutputToScreenPixel(GetPointerPosPixel());
tools::Rectangle aRect;
QuickHelpFlags nAlign;
if (!bVertical)
{
// above
aRect.SetLeft( aMousePos.X() );
aRect.SetTop( aPos.Y() - 4 );
nAlign = QuickHelpFlags::Bottom|QuickHelpFlags::Center;
}
else
{
// top right
aRect.SetLeft( aPos.X() + aSize.Width() + 8 );
aRect.SetTop( aMousePos.Y() - 2 );
nAlign = QuickHelpFlags::Left|QuickHelpFlags::Bottom;
}
aRect.SetRight( aRect.Left() );
aRect.SetBottom( aRect.Top() );
if (nTipVisible)
Help::HidePopover(this, nTipVisible);
nTipVisible = Help::ShowPopover(this, aRect, aHelpStr, nAlign);
}
void ScHeaderControl::HideDragHelp()
{
aShowHelpTimer.Stop();
if (nTipVisible)
{
Help::HidePopover(this, nTipVisible);
nTipVisible = nullptr;
}
}
void ScHeaderControl::RequestHelp( const HelpEvent& rHEvt )
{
// If the own QuickHelp is displayed, don't let RequestHelp remove it
bool bOwn = bDragging && Help::IsQuickHelpEnabled();
if (!bOwn)
Window::RequestHelp(rHEvt);
}
// dummies for virtual methods
SCCOLROW ScHeaderControl::GetHiddenCount( SCCOLROW nEntryNo ) const
{
SCCOLROW nHidden = 0;
while ( nEntryNo < nSize && GetEntrySize( nEntryNo ) == 0 )
{
++nEntryNo;
++nHidden;
}
return nHidden;
}
bool ScHeaderControl::IsLayoutRTL() const
{
return false;
}
bool ScHeaderControl::IsMirrored() const
{
return false;
}
bool ScHeaderControl::IsDisabled() const
{
return false;
}
bool ScHeaderControl::ResizeAllowed() const
{
return true;
}
void ScHeaderControl::SelectWindow()
{
}
void ScHeaderControl::DrawInvert( tools::Long /* nDragPos */ )
{
}
OUString ScHeaderControl::GetDragHelp( tools::Long /* nVal */ )
{
return OUString();
}
void ScHeaderControl::SetMarking( bool /* bSet */ )
{
}
void ScHeaderControl::GetMarkRange(SCCOLROW& rStart, SCCOLROW& rEnd) const
{
rStart = nMarkStart;
rEnd = nMarkEnd;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1053 Calling the 'EnableRTL' virtual function in the constructor may lead to unexpected result at runtime.
↑ V1053 Calling the 'SetSizePixel' virtual function in the constructor may lead to unexpected result at runtime.