/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <comphelper/string.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld.hxx>
#include <svl/eitem.hxx>
#include <svl/intitem.hxx>
#include <svl/style.hxx>
#include <osl/diagnose.h>
#include <sfx2/styfitem.hxx>
#include <sfx2/styledlg.hxx>
#include <sfx2/tabdlg.hxx>
#include <sfx2/app.hxx>
#include <sfx2/objsh.hxx>
#include <sfx2/sfxresid.hxx>
#include <sfx2/module.hxx>
#include <sfx2/sfxsids.hrc>
#include <sfx2/strings.hrc>
#include <svl/stritem.hxx>
#include <sfx2/dispatch.hxx>
#include "mgetempl.hxx"
/* SfxManageStyleSheetPage Constructor
*
* initializes the list box with the templates
*/
SfxManageStyleSheetPage::SfxManageStyleSheetPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rAttrSet)
: SfxTabPage(pPage, pController, u"sfx/ui/managestylepage.ui"_ustr, u"ManageStylePage"_ustr, &rAttrSet)
, pStyle(&static_cast<SfxStyleDialogController*>(pController)->GetStyleSheet())
, pItem(nullptr)
, bModified(false)
, aName(pStyle->GetName())
, aFollow(pStyle->GetFollow())
, aParent(pStyle->GetParent())
, nFlags(pStyle->GetMask())
, m_xName(m_xBuilder->weld_entry(u"name"_ustr))
, m_xAutoCB(m_xBuilder->weld_check_button(u"autoupdate"_ustr))
, m_xFollowFt(m_xBuilder->weld_label(u"nextstyleft"_ustr))
, m_xFollowLb(m_xBuilder->weld_combo_box(u"nextstyle"_ustr))
, m_xEditStyleBtn(m_xBuilder->weld_button(u"editstyle"_ustr))
, m_xBaseFt(m_xBuilder->weld_label(u"linkedwithft"_ustr))
, m_xBaseLb(m_xBuilder->weld_combo_box(u"linkedwith"_ustr))
, m_xEditLinkStyleBtn(m_xBuilder->weld_button(u"editlinkstyle"_ustr))
, m_xFilterFt(m_xBuilder->weld_label(u"categoryft"_ustr))
, m_xFilterLb(m_xBuilder->weld_combo_box(u"category"_ustr))
, m_xDescFt(m_xBuilder->weld_label(u"desc"_ustr))
{
m_xFollowLb->make_sorted();
// tdf#120188 like SwCharURLPage limit the width of the style combos
const int nMaxWidth(m_xFollowLb->get_approximate_digit_width() * 50);
m_xFollowLb->set_size_request(nMaxWidth , -1);
m_xBaseLb->make_sorted();
m_xBaseLb->set_size_request(nMaxWidth , -1);
//note that the code depends on categories not being lexically
//sorted, so if it's changed to sorted, the code needs to
//be adapted to be position unaware
m_xFilterLb->set_size_request(nMaxWidth , -1);
// this Page needs ExchangeSupport
SetExchangeSupport();
if ( aFollow.isEmpty() || aFollow == aName )
m_xEditStyleBtn->set_sensitive(false);
else
m_xEditStyleBtn->set_sensitive(true);
int linkSelectPos = m_xBaseLb->get_active();
if ( linkSelectPos == 0 )
m_xEditLinkStyleBtn->set_sensitive(false);
else
m_xEditLinkStyleBtn->set_sensitive(true);
mxFamilies = SfxApplication::GetModule_Impl()->CreateStyleFamilies();
SfxStyleSheetBasePool* pPool = nullptr;
SfxObjectShell* pDocShell = SfxObjectShell::Current();
if ( pDocShell )
pPool = pDocShell->GetStyleSheetPool();
OSL_ENSURE( pPool, "no Pool or no DocShell" );
if ( pPool )
{
pPool->First(pStyle->GetFamily()); // for SW - update internal list
}
if ( pStyle->GetName().isEmpty() && pPool )
{
// NullString as Name -> generate Name
OUString aNoName(SfxStyleDialogController::GenerateUnusedName(*pPool, pStyle->GetFamily()));
pStyle->SetName( aNoName );
aName = aNoName;
aFollow = pStyle->GetFollow();
aParent = pStyle->GetParent();
}
m_xName->set_text(pStyle->GetName());
// Set the field read-only if it is NOT an user-defined style
// but allow selecting and copying
if (pStyle->IsUserDefined())
{
m_xName->set_can_focus(true);
m_xName->set_editable(true);
m_xName->set_sensitive(true);
m_xName->grab_focus(); // tdf#142017 default to focus within the page, not in notebook tab
}
else
{
m_xName->set_sensitive(false);
}
if ( pStyle->HasFollowSupport() && pPool )
{
SfxStyleSheetBase* pPoolStyle = pPool->First(pStyle->GetFamily());
m_xFollowLb->freeze();
while ( pPoolStyle )
{
m_xFollowLb->append_text(pPoolStyle->GetName());
pPoolStyle = pPool->Next();
}
// A new Template is not yet in the Pool
if (m_xFollowLb->find_text(pStyle->GetName()) == -1)
m_xFollowLb->append_text(pStyle->GetName());
m_xFollowLb->thaw();
}
else
{
m_xFollowFt->set_sensitive(false);
m_xFollowFt->hide();
m_xFollowLb->set_sensitive(false);
m_xFollowLb->hide();
m_xEditStyleBtn->hide();
}
if ( pStyle->HasParentSupport() && pPool )
{
m_xBaseLb->freeze();
if ( pStyle->HasClearParentSupport() )
// the base template can be set to NULL
m_xBaseLb->append_text(SfxResId(STR_NONE));
SfxStyleSheetBase* pPoolStyle = pPool->First(pStyle->GetFamily());
while ( pPoolStyle )
{
const OUString aStr( pPoolStyle->GetName() );
// own name as base template
if ( aStr != aName )
m_xBaseLb->append_text(aStr);
pPoolStyle = pPool->Next();
}
m_xBaseLb->thaw();
}
else
{
m_xBaseFt->set_sensitive(false);
m_xBaseLb->set_sensitive(false);
}
size_t nCount = mxFamilies->size();
size_t i;
for ( i = 0; i < nCount; ++i )
{
pItem = &(mxFamilies->at(i));
if ( pItem->GetFamily() == pStyle->GetFamily() )
break;
}
if ( i < nCount )
{
sal_uInt16 nStyleFilterIdx = 0xffff;
// Filter flags
const SfxStyleFilter& rList = pItem->GetFilterList();
nCount = rList.size();
sal_uInt16 nIdx = 0;
SfxStyleSearchBits nMask = pStyle->GetMask() & ~SfxStyleSearchBits::UserDefined;
if ( nMask == SfxStyleSearchBits::Auto ) // User Template?
nMask = pStyle->GetMask();
for ( i = 0; i < nCount; ++i )
{
const SfxFilterTuple& rTupel = rList[ i ];
if ( rTupel.nFlags != SfxStyleSearchBits::Auto &&
rTupel.nFlags != SfxStyleSearchBits::Used &&
rTupel.nFlags != SfxStyleSearchBits::AllVisible &&
rTupel.nFlags != SfxStyleSearchBits::All )
{
OUString sId(OUString::number(i));
m_xFilterLb->insert(nIdx, rTupel.aName, &sId, nullptr, nullptr);
if ( ( rTupel.nFlags & nMask ) == nMask )
nStyleFilterIdx = nIdx;
++nIdx;
}
}
if ( nStyleFilterIdx != 0xFFFF )
m_xFilterLb->set_active(nStyleFilterIdx);
}
if ( !m_xFilterLb->get_count() || !pStyle->IsUserDefined() )
{
pItem = nullptr;
m_xFilterFt->set_sensitive(false);
m_xFilterLb->set_sensitive(false);
}
else
m_xFilterLb->save_value();
SetDescriptionText_Impl();
if (m_xFollowLb->get_sensitive() || m_xBaseLb->get_sensitive())
{
m_xName->connect_focus_in(
LINK( this, SfxManageStyleSheetPage, GetFocusHdl ) );
m_xName->connect_focus_out(
LINK( this, SfxManageStyleSheetPage, LoseFocusHdl ) );
}
// It is a style with auto update? (SW only)
if(SfxItemState::SET == rAttrSet.GetItemState(SID_ATTR_AUTO_STYLE_UPDATE))
m_xAutoCB->show();
m_xFollowLb->connect_changed(LINK(this, SfxManageStyleSheetPage, EditStyleSelectHdl_Impl));
m_xBaseLb->connect_changed(LINK(this, SfxManageStyleSheetPage, EditLinkStyleSelectHdl_Impl));
m_xEditStyleBtn->connect_clicked(LINK(this, SfxManageStyleSheetPage, EditStyleHdl_Impl));
m_xEditLinkStyleBtn->connect_clicked(LINK(this, SfxManageStyleSheetPage, EditLinkStyleHdl_Impl));
}
SfxManageStyleSheetPage::~SfxManageStyleSheetPage()
{
mxFamilies.reset();
pItem = nullptr;
pStyle = nullptr;
}
void SfxManageStyleSheetPage::UpdateName_Impl( weld::ComboBox* pBox,
const OUString& rNew )
/* [Description]
After the change of a template name update the ListBox pBox
[Parameter]
ListBox* pBox ListBox, whose entries are to be updated
const String& rNew the new Name
*/
{
if (pBox->get_sensitive())
{
// it is the current entry, which name was modified
const bool bSelect = pBox->get_active_text() == aBuf;
int nOldIndex = pBox->find_text(aBuf);
if (nOldIndex != -1)
pBox->remove(nOldIndex);
pBox->append_text(rNew);
if (bSelect)
pBox->set_active_text(rNew);
}
}
void SfxManageStyleSheetPage::SetDescriptionText_Impl()
/* [Description]
Set attribute description. Get the set metric for this.
*/
{
MapUnit eUnit = MapUnit::MapCM;
FieldUnit eFieldUnit( FieldUnit::CM );
SfxModule* pModule = SfxModule::GetActiveModule();
if ( pModule )
{
eFieldUnit = pModule->GetFieldUnit();
}
switch ( eFieldUnit )
{
case FieldUnit::MM: eUnit = MapUnit::MapMM; break;
case FieldUnit::CM:
case FieldUnit::M:
case FieldUnit::KM: eUnit = MapUnit::MapCM; break;
case FieldUnit::POINT:
case FieldUnit::PICA: eUnit = MapUnit::MapPoint; break;
case FieldUnit::INCH:
case FieldUnit::FOOT:
case FieldUnit::MILE: eUnit = MapUnit::MapInch; break;
default:
OSL_FAIL( "non supported field unit" );
}
m_xDescFt->set_label(pStyle->GetDescription(eUnit));
}
IMPL_LINK_NOARG(SfxManageStyleSheetPage, EditStyleSelectHdl_Impl, weld::ComboBox&, void)
{
OUString aTemplName(m_xFollowLb->get_active_text());
OUString aEditTemplName(m_xName->get_text());
m_xEditStyleBtn->set_sensitive(aTemplName != aEditTemplName);
}
IMPL_LINK_NOARG(SfxManageStyleSheetPage, EditStyleHdl_Impl, weld::Button&, void)
{
OUString aTemplName(m_xFollowLb->get_active_text());
Execute_Impl(SID_STYLE_EDIT, aTemplName, static_cast<sal_uInt16>(pStyle->GetFamily()));
}
IMPL_LINK_NOARG(SfxManageStyleSheetPage, EditLinkStyleSelectHdl_Impl, weld::ComboBox&, void)
{
int linkSelectPos = m_xBaseLb->get_active();
if ( linkSelectPos == 0 )
m_xEditLinkStyleBtn->set_sensitive(false);
else
m_xEditLinkStyleBtn->set_sensitive(true);
}
IMPL_LINK_NOARG(SfxManageStyleSheetPage, EditLinkStyleHdl_Impl, weld::Button&, void)
{
OUString aTemplName(m_xBaseLb->get_active_text());
if (aTemplName != SfxResId(STR_NONE))
Execute_Impl( SID_STYLE_EDIT, aTemplName, static_cast<sal_uInt16>(pStyle->GetFamily()) );
}
// Internal: Perform functions through the Dispatcher
bool SfxManageStyleSheetPage::Execute_Impl(
sal_uInt16 nId, const OUString &rStr, sal_uInt16 nFamily)
{
SfxDispatcher &rDispatcher = *SfxGetpApp()->GetDispatcher_Impl();
SfxStringItem aItem(nId, rStr);
SfxUInt16Item aFamily(SID_STYLE_FAMILY, nFamily);
const SfxPoolItem* pItems[ 6 ];
sal_uInt16 nCount = 0;
if( !rStr.isEmpty() )
pItems[ nCount++ ] = &aItem;
pItems[ nCount++ ] = &aFamily;
pItems[ nCount++ ] = nullptr;
const SfxPoolItemHolder aResult(rDispatcher.Execute(
nId, SfxCallMode::SYNCHRON | SfxCallMode::RECORD,
pItems ));
return aResult.is();
}
IMPL_LINK(SfxManageStyleSheetPage, GetFocusHdl, weld::Widget&, rControl, void)
/* [Description]
StarView Handler; GetFocus-Handler of the Edits with the template name.
*/
{
weld::Entry& rEdit = dynamic_cast<weld::Entry&>(rControl);
aBuf = comphelper::string::stripStart(rEdit.get_text(), ' ');
}
IMPL_LINK(SfxManageStyleSheetPage, LoseFocusHdl, weld::Widget&, rControl, void)
/* [Description]
StarView Handler; lose-focus-handler of the edits of the template name.
This will update the listbox with the subsequent templates. The current
template itself is not returned in the listbox of the base templates.
*/
{
weld::Entry& rEdit = dynamic_cast<weld::Entry&>(rControl);
const OUString aStr(comphelper::string::stripStart(rEdit.get_text(), ' '));
rEdit.set_text(aStr);
// Update the Listbox of the base template if possible
if ( aStr != aBuf )
UpdateName_Impl(m_xFollowLb.get(), aStr);
}
bool SfxManageStyleSheetPage::FillItemSet( SfxItemSet* rSet )
/* [Description]
Handler for setting the (modified) data. I called from the OK of the
SfxTabDialog.
[Parameter]
SfxItemSet &rAttrSet The set, which receives the data.
[Return value]
sal_Bool sal_True: The data had been changed
sal_False: The data had not been changed
[Cross-reference]
<class SfxTabDialog>
*/
{
const int nFilterIdx = m_xFilterLb->get_active();
// Set Filter
if ( nFilterIdx != -1 &&
m_xFilterLb->get_value_changed_from_saved() &&
m_xFilterLb->get_sensitive() )
{
bModified = true;
assert(pItem && "No Item");
// is only possibly for user templates
SfxStyleSearchBits nMask = pItem->GetFilterList()[m_xFilterLb->get_id(nFilterIdx).toUInt32()].nFlags | SfxStyleSearchBits::UserDefined;
pStyle->SetMask( nMask );
}
if (m_xAutoCB->get_visible() && m_xAutoCB->get_state_changed_from_saved())
{
rSet->Put(SfxBoolItem(SID_ATTR_AUTO_STYLE_UPDATE, m_xAutoCB->get_active()));
}
return bModified;
}
void SfxManageStyleSheetPage::Reset( const SfxItemSet* /*rAttrSet*/ )
/* [Description]
Handler to initialize the page with the initial data.
[Parameter]
const SfxItemSet &rAttrSet The data set
[Cross-reference]
<class SfxTabDialog>
*/
{
bModified = false;
OUString sCmp( pStyle->GetName() );
if ( sCmp != aName )
pStyle->SetName( aName );
m_xName->set_text( aName );
if (m_xName->get_editable())
m_xName->select_region(0, -1);
if ( m_xFollowLb->get_sensitive() )
{
sCmp = pStyle->GetFollow();
if ( sCmp != aFollow )
pStyle->SetFollow( aFollow );
if ( aFollow.isEmpty() )
{
m_xFollowLb->set_active_text( aName );
m_xEditStyleBtn->set_sensitive( false );
}
else
m_xFollowLb->set_active_text( aFollow );
}
if (m_xBaseLb->get_sensitive())
{
sCmp = pStyle->GetParent();
if ( sCmp != aParent )
pStyle->SetParent( aParent );
if ( aParent.isEmpty() )
{
m_xBaseLb->set_active_text( SfxResId(STR_NONE) );
m_xEditLinkStyleBtn->set_sensitive( false );
}
else
m_xBaseLb->set_active_text( aParent );
if ( SfxResId(STR_STANDARD) == aName )
{
// the default template can not be linked
m_xBaseFt->set_sensitive(false);
m_xBaseLb->set_sensitive(false);
}
}
else
m_xEditLinkStyleBtn->set_sensitive( false );
if (m_xFilterLb->get_sensitive())
{
SfxStyleSearchBits nCmp = pStyle->GetMask();
if ( nCmp != nFlags )
pStyle->SetMask( nFlags );
m_xFilterLb->set_active_text(m_xFilterLb->get_saved_value());
}
}
std::unique_ptr<SfxTabPage> SfxManageStyleSheetPage::Create( weld::Container* pPage, weld::DialogController* pController,
const SfxItemSet *rAttrSet )
{
return std::make_unique<SfxManageStyleSheetPage>(pPage, pController, *rAttrSet);
}
void SfxManageStyleSheetPage::ActivatePage( const SfxItemSet& rSet)
/* [Description]
ActivatePage handler of SfxTabDialog, is used for the update of the
descriptive text, since this might have changed through changes of data on
other pages.
[Parameter]
const SfxItemSet& the set for the exchange of data; is not used here.
[Cross-reference]
<SfxTabDialog::ActivatePage(const SfxItemSet &)>
*/
{
SetDescriptionText_Impl();
// It is a style with auto update? (SW only)
const SfxBoolItem* pPoolItem;
if ( (pPoolItem = rSet.GetItemIfSet( SID_ATTR_AUTO_STYLE_UPDATE, false )) )
m_xAutoCB->set_active(pPoolItem->GetValue());
m_xAutoCB->save_state();
m_xName->save_value();
}
DeactivateRC SfxManageStyleSheetPage::DeactivatePage( SfxItemSet* pItemSet )
/* [Description]
DeactivatePage-handler of SfxTabDialog; data is set on the template, so
that the correct inheritance on the other pages of the dialog is made.
If an error occurs, leaving the page is prevented.
[Parameter]
SfxItemSet* the set for the exchange of data; is not used here.
[Cross-reference]
<SfxTabDialog::DeactivatePage(SfxItemSet*)>
*/
{
DeactivateRC nRet = DeactivateRC::LeavePage;
if (m_xName->get_value_changed_from_saved())
{
// By pressing <Enter> LoseFocus() is not triggered through StarView
if (m_xName->has_focus())
LoseFocusHdl( *m_xName );
if (!pStyle->SetName(comphelper::string::stripStart(m_xName->get_text(), ' ')))
{
std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
SfxResId(STR_TABPAGE_INVALIDNAME)));
xBox->run();
m_xName->grab_focus();
m_xName->select_region(0, -1);
return DeactivateRC::KeepPage;
}
bModified = true;
}
if (pStyle->HasFollowSupport() && m_xFollowLb->get_sensitive())
{
const OUString aFollowEntry( m_xFollowLb->get_active_text() );
if ( pStyle->GetFollow() != aFollowEntry )
{
if ( !pStyle->SetFollow( aFollowEntry ) )
{
std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
SfxResId(STR_TABPAGE_INVALIDSTYLE)));
xBox->run();
m_xFollowLb->grab_focus();
return DeactivateRC::KeepPage;
}
bModified = true;
}
}
if (m_xBaseLb->get_sensitive())
{
OUString aParentEntry( m_xBaseLb->get_active_text() );
if ( SfxResId(STR_NONE) == aParentEntry || aParentEntry == pStyle->GetName() )
aParentEntry.clear();
if ( pStyle->GetParent() != aParentEntry )
{
if ( !pStyle->SetParent( aParentEntry ) )
{
std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Info, VclButtonsType::Ok,
SfxResId(STR_TABPAGE_INVALIDPARENT)));
xBox->run();
m_xBaseLb->grab_focus();
return DeactivateRC::KeepPage;
}
bModified = true;
nRet = nRet | DeactivateRC::RefreshSet;
}
}
if ( pItemSet )
FillItemSet( pItemSet );
return nRet;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1048 The 'eUnit' variable was assigned the same value.