/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <mmresultdialogs.hxx>
#include <mmconfigitem.hxx>
#include <mailconfigpage.hxx>
#include "mmgreetingspage.hxx"
#include <printdata.hxx>
#include <swmessdialog.hxx>
#include <cmdid.h>
#include <swtypes.hxx>
#include <view.hxx>
#include <wrtsh.hxx>
#include <docsh.hxx>
#include <IDocumentDeviceAccess.hxx>
#include <hintids.hxx>
#include <swmodule.hxx>
#include <vcl/QueueInfo.hxx>
#include <editeng/langitem.hxx>
#include <o3tl/temporary.hxx>
#include <svl/itemset.hxx>
#include <svl/stritem.hxx>
#include <svtools/ehdl.hxx>
#include <svtools/sfxecode.hxx>
#include <vcl/stdtext.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld.hxx>
#include <vcl/scheduler.hxx>
#include <sfx2/printer.hxx>
#include <sfx2/fcontnr.hxx>
#include <sfx2/viewfrm.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/docfilt.hxx>
#include <tools/urlobj.hxx>
#include <svl/urihelper.hxx>
#include <vcl/print.hxx>
#include <rtl/tencinfo.h>
#include <sal/log.hxx>
#include <unotools/tempfile.hxx>
#include <osl/diagnose.h>
#include <osl/file.hxx>
#include <com/sun/star/frame/XStorable.hpp>
#include <com/sun/star/sdbcx/XColumnsSupplier.hpp>
#include <com/sun/star/sdb/XColumn.hpp>
#include <com/sun/star/task/ErrorCodeIOException.hpp>
#include <dbmgr.hxx>
#include <swunohelper.hxx>
#include <shellio.hxx>
#include <svtools/htmlcfg.hxx>
#include <sfx2/event.hxx>
#include <swevent.hxx>
#include <dbui.hxx>
#include <dbui.hrc>
#include <doc.hxx>
#include <sfx2/app.hxx>
#include <strings.hrc>
#include <comphelper/propertyvalue.hxx>
#include <comphelper/string.hxx>
#include <iodetect.hxx>
#include <unotxdoc.hxx>
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
#define MM_DOCTYPE_OOO 1
#define MM_DOCTYPE_PDF 2
#define MM_DOCTYPE_WORD 3
#define MM_DOCTYPE_HTML 4
#define MM_DOCTYPE_TEXT 5
static OUString lcl_GetExtensionForDocType(sal_uLong nDocType)
{
OUString sExtension;
switch( nDocType )
{
case MM_DOCTYPE_OOO : sExtension = "odt"; break;
case MM_DOCTYPE_PDF : sExtension = "pdf"; break;
case MM_DOCTYPE_WORD: sExtension = "doc"; break;
case MM_DOCTYPE_HTML: sExtension = "html"; break;
case MM_DOCTYPE_TEXT: sExtension = "txt"; break;
}
return sExtension;
}
static OUString lcl_GetColumnValueOf(const OUString& rColumn, Reference < container::XNameAccess> const & rxColAccess )
{
OUString sRet;
try
{
if (rxColAccess->hasByName(rColumn))
{
Any aCol = rxColAccess->getByName(rColumn);
Reference< sdb::XColumn > xColumn;
aCol >>= xColumn;
if(xColumn.is())
sRet = xColumn->getString();
}
}
catch (const uno::Exception&)
{
}
return sRet;
}
/**
* Replace email server settings in rConfigItem with those set in Writer's global
* mail merge config settings.
*/
static void lcl_UpdateEmailSettingsFromGlobalConfig(SwMailMergeConfigItem& rConfigItem)
{
// newly created SwMailMergeConfigItem is initialized with values from (global) config
SwMailMergeConfigItem aConfigItem;
// take over email-related settings
rConfigItem.SetMailDisplayName(aConfigItem.GetMailDisplayName());
rConfigItem.SetMailAddress(aConfigItem.GetMailAddress());
rConfigItem.SetMailReplyTo(aConfigItem.GetMailReplyTo());
rConfigItem.SetMailReplyTo(aConfigItem.IsMailReplyTo());
rConfigItem.SetMailServer(aConfigItem.GetMailServer());
rConfigItem.SetMailPort(aConfigItem.GetMailPort());
rConfigItem.SetSecureConnection(aConfigItem.IsSecureConnection());
// authentication settings
rConfigItem.SetAuthentication(aConfigItem.IsAuthentication());
rConfigItem.SetSMTPAfterPOP(aConfigItem.IsSMTPAfterPOP());
rConfigItem.SetMailUserName(aConfigItem.GetMailUserName());
rConfigItem.SetMailPassword(aConfigItem.GetMailPassword());
rConfigItem.SetInServerName(aConfigItem.GetInServerName());
rConfigItem.SetInServerPort(aConfigItem.GetInServerPort());
rConfigItem.SetInServerPOP(aConfigItem.IsInServerPOP());
rConfigItem.SetInServerUserName(aConfigItem.GetInServerUserName());
rConfigItem.SetInServerPassword(aConfigItem.GetInServerPassword());
}
namespace {
class SwSaveWarningBox_Impl : public SwMessageAndEditDialog
{
DECL_LINK( ModifyHdl, weld::Entry&, void);
public:
SwSaveWarningBox_Impl(weld::Window* pParent, const OUString& rFileName);
OUString GetFileName() const
{
return m_xEdit->get_text();
}
};
class SwSendQueryBox_Impl : public SwMessageAndEditDialog
{
bool m_bIsEmptyAllowed;
DECL_LINK( ModifyHdl, weld::Entry&, void);
public:
SwSendQueryBox_Impl(weld::Window* pParent, const OUString& rID,
const OUString& rUIXMLDescription);
void SetValue(const OUString& rSet)
{
m_xEdit->set_text(rSet);
ModifyHdl(*m_xEdit);
}
OUString GetValue() const
{
return m_xEdit->get_text();
}
void SetIsEmptyTextAllowed(bool bSet)
{
m_bIsEmptyAllowed = bSet;
ModifyHdl(*m_xEdit);
}
};
}
SwSaveWarningBox_Impl::SwSaveWarningBox_Impl(weld::Window* pParent, const OUString& rFileName)
: SwMessageAndEditDialog(pParent, u"AlreadyExistsDialog"_ustr,
u"modules/swriter/ui/alreadyexistsdialog.ui"_ustr)
{
m_xEdit->set_text(rFileName);
m_xEdit->connect_changed(LINK(this, SwSaveWarningBox_Impl, ModifyHdl));
INetURLObject aTmp(rFileName);
m_xDialog->set_primary_text(m_xDialog->get_primary_text().replaceAll("%1", aTmp.getName(
INetURLObject::LAST_SEGMENT, true, INetURLObject::DecodeMechanism::WithCharset)));
ModifyHdl(*m_xEdit);
}
IMPL_LINK( SwSaveWarningBox_Impl, ModifyHdl, weld::Entry&, rEdit, void)
{
m_xOKPB->set_sensitive(!rEdit.get_text().isEmpty());
}
SwSendQueryBox_Impl::SwSendQueryBox_Impl(weld::Window* pParent, const OUString& rID,
const OUString& rUIXMLDescription)
: SwMessageAndEditDialog(pParent, rID, rUIXMLDescription)
, m_bIsEmptyAllowed(true)
{
m_xEdit->connect_changed(LINK(this, SwSendQueryBox_Impl, ModifyHdl));
ModifyHdl(*m_xEdit);
}
IMPL_LINK( SwSendQueryBox_Impl, ModifyHdl, weld::Entry&, rEdit, void)
{
m_xOKPB->set_sensitive(m_bIsEmptyAllowed || !rEdit.get_text().isEmpty());
}
namespace {
class SwCopyToDialog : public SfxDialogController
{
std::unique_ptr<weld::Entry> m_xCCED;
std::unique_ptr<weld::Entry> m_xBCCED;
public:
explicit SwCopyToDialog(weld::Window* pParent)
: SfxDialogController(pParent, u"modules/swriter/ui/ccdialog.ui"_ustr, u"CCDialog"_ustr)
, m_xCCED(m_xBuilder->weld_entry(u"cc"_ustr))
, m_xBCCED(m_xBuilder->weld_entry(u"bcc"_ustr))
{
}
OUString GetCC() const {return m_xCCED->get_text();}
void SetCC(const OUString& rSet) {m_xCCED->set_text(rSet);}
OUString GetBCC() const {return m_xBCCED->get_text();}
void SetBCC(const OUString& rSet) {m_xBCCED->set_text(rSet);}
};
}
SwMMResultSaveDialog::SwMMResultSaveDialog(weld::Window* pParent)
: SfxDialogController(pParent, u"modules/swriter/ui/mmresultsavedialog.ui"_ustr, u"MMResultSaveDialog"_ustr)
, m_bCancelSaving(false)
, m_xSaveAsOneRB(m_xBuilder->weld_radio_button(u"singlerb"_ustr))
, m_xSaveIndividualRB(m_xBuilder->weld_radio_button(u"individualrb"_ustr))
, m_xFromRB(m_xBuilder->weld_check_button(u"fromrb"_ustr))
, m_xFromNF(m_xBuilder->weld_spin_button(u"from"_ustr))
, m_xToFT(m_xBuilder->weld_label(u"toft"_ustr))
, m_xToNF(m_xBuilder->weld_spin_button(u"to"_ustr))
, m_xOKButton(m_xBuilder->weld_button(u"ok"_ustr))
{
Link<weld::Toggleable&,void> aLink = LINK(this, SwMMResultSaveDialog, DocumentSelectionHdl_Impl);
m_xSaveAsOneRB->connect_toggled(aLink);
m_xSaveIndividualRB->connect_toggled(aLink);
m_xFromRB->connect_toggled(aLink);
// m_pSaveAsOneRB is the default, so disable m_xFromNF and m_xToNF initially.
aLink.Call(*m_xSaveAsOneRB);
if (SwView* pView = GetActiveView())
{
const std::shared_ptr<SwMailMergeConfigItem>& xConfigItem = pView->GetMailMergeConfigItem();
assert(xConfigItem);
sal_Int32 nCount = xConfigItem->GetMergedDocumentCount();
m_xFromNF->set_max(nCount);
m_xToNF->set_max(nCount);
m_xToNF->set_value(nCount);
}
m_xOKButton->connect_clicked(LINK(this, SwMMResultSaveDialog, SaveOutputHdl_Impl));
}
SwMMResultSaveDialog::~SwMMResultSaveDialog()
{
}
SwMMResultPrintDialog::SwMMResultPrintDialog(weld::Window* pParent)
: SfxDialogController(pParent, u"modules/swriter/ui/mmresultprintdialog.ui"_ustr, u"MMResultPrintDialog"_ustr)
, m_xPrinterLB(m_xBuilder->weld_combo_box(u"printers"_ustr))
, m_xPrinterSettingsPB(m_xBuilder->weld_button(u"printersettings"_ustr))
, m_xPrintAllRB(m_xBuilder->weld_radio_button(u"printallrb"_ustr))
, m_xFromRB(m_xBuilder->weld_radio_button(u"fromrb"_ustr))
, m_xFromNF(m_xBuilder->weld_spin_button(u"from"_ustr))
, m_xToFT(m_xBuilder->weld_label(u"toft"_ustr))
, m_xToNF(m_xBuilder->weld_spin_button(u"to"_ustr))
, m_xOKButton(m_xBuilder->weld_button(u"ok"_ustr))
{
m_xPrinterLB->make_sorted();
m_xPrinterLB->connect_changed(LINK(this, SwMMResultPrintDialog, PrinterChangeHdl_Impl));
m_xPrinterSettingsPB->connect_clicked(LINK(this, SwMMResultPrintDialog, PrinterSetupHdl_Impl));
Link<weld::Toggleable&,void> aLink = LINK(this, SwMMResultPrintDialog, DocumentSelectionHdl_Impl);
m_xPrintAllRB->connect_toggled(aLink);
m_xFromRB->connect_toggled(aLink);
// m_pPrintAllRB is the default, so disable m_xFromNF and m_xToNF initially.
aLink.Call(*m_xPrintAllRB);
m_xOKButton->connect_clicked(LINK(this, SwMMResultPrintDialog, PrintHdl_Impl));
FillInPrinterSettings();
}
SwMMResultPrintDialog::~SwMMResultPrintDialog()
{
}
SwMMResultEmailDialog::SwMMResultEmailDialog(weld::Window* pParent)
: SfxDialogController(pParent, u"modules/swriter/ui/mmresultemaildialog.ui"_ustr, u"MMResultEmailDialog"_ustr)
, m_sConfigureMail(SwResId(ST_CONFIGUREMAIL))
, m_xMailToLB(m_xBuilder->weld_combo_box(u"mailto"_ustr))
, m_xCopyToPB(m_xBuilder->weld_button(u"copyto"_ustr))
, m_xSubjectED(m_xBuilder->weld_entry(u"subject"_ustr))
, m_xSendAsLB(m_xBuilder->weld_combo_box(u"sendas"_ustr))
, m_xSendAsPB(m_xBuilder->weld_button(u"sendassettings"_ustr))
, m_xAttachmentGroup(m_xBuilder->weld_widget(u"attachgroup"_ustr))
, m_xAttachmentED(m_xBuilder->weld_entry(u"attach"_ustr))
, m_xPasswordFT(m_xBuilder->weld_label(u"passwordft"_ustr))
, m_xPasswordLB(m_xBuilder->weld_combo_box(u"password"_ustr))
, m_xPasswordCB(m_xBuilder->weld_check_button(u"passwordcb"_ustr))
, m_xSendAllRB(m_xBuilder->weld_radio_button(u"sendallrb"_ustr))
, m_xFromRB(m_xBuilder->weld_radio_button(u"fromrb"_ustr))
, m_xFromNF(m_xBuilder->weld_spin_button(u"from"_ustr))
, m_xToFT(m_xBuilder->weld_label(u"toft"_ustr))
, m_xToNF(m_xBuilder->weld_spin_button(u"to"_ustr))
, m_xOKButton(m_xBuilder->weld_button(u"ok"_ustr))
{
m_xCopyToPB->connect_clicked(LINK(this, SwMMResultEmailDialog, CopyToHdl_Impl));
m_xSendAsPB->connect_clicked(LINK(this, SwMMResultEmailDialog, SendAsHdl_Impl));
m_xSendAsLB->connect_changed(LINK(this, SwMMResultEmailDialog, SendTypeHdl_Impl));
m_xPasswordCB->connect_toggled( LINK( this, SwMMResultEmailDialog, CheckHdl ));
Link<weld::Toggleable&,void> aLink = LINK(this, SwMMResultEmailDialog, DocumentSelectionHdl_Impl);
m_xSendAllRB->connect_toggled(aLink);
m_xFromRB->connect_toggled(aLink);
// m_xSendAllRB is the default, so disable m_xFromNF and m_xToNF initially.
aLink.Call(*m_xSendAllRB);
m_xOKButton->connect_clicked(LINK(this, SwMMResultEmailDialog, SendDocumentsHdl_Impl));
m_xPasswordCB->set_sensitive(false);
m_xPasswordFT->set_sensitive(false);
m_xPasswordLB->set_sensitive(false);
FillInEmailSettings();
}
SwMMResultEmailDialog::~SwMMResultEmailDialog()
{
}
void SwMMResultPrintDialog::FillInPrinterSettings()
{
//fill printer ListBox
SwView* pView = GetActiveView();
if (!pView)
return;
const std::shared_ptr<SwMailMergeConfigItem>& xConfigItem = pView->GetMailMergeConfigItem();
const std::vector<OUString>& rPrinters = Printer::GetPrinterQueues();
unsigned int nCount = rPrinters.size();
bool bMergePrinterExists = false;
for (unsigned int i = 0; i < nCount; ++i)
{
m_xPrinterLB->append_text( rPrinters[i] );
if( !bMergePrinterExists && rPrinters[i] == xConfigItem->GetSelectedPrinter() )
bMergePrinterExists = true;
}
assert(xConfigItem);
if(!bMergePrinterExists)
{
SfxPrinter* pPrinter = pView->GetWrtShell().getIDocumentDeviceAccess().getPrinter( true );
m_xPrinterLB->set_active_text(pPrinter->GetName());
}
else
{
m_xPrinterLB->set_active_text(xConfigItem->GetSelectedPrinter());
}
PrinterChangeHdl_Impl(*m_xPrinterLB);
sal_Int32 count = xConfigItem->GetMergedDocumentCount();
m_xFromNF->set_max(count);
m_xToNF->set_value(count);
m_xToNF->set_max(count);
}
void SwMMResultEmailDialog::FillInEmailSettings()
{
SwView* pView = GetActiveView();
if (!pView)
return;
const std::shared_ptr<SwMailMergeConfigItem>& xConfigItem = pView->GetMailMergeConfigItem();
assert(xConfigItem);
SwView* pSourceView = xConfigItem->GetSourceView();
OSL_ENSURE(pSourceView, "no source view exists");
if (pSourceView)
{
SwDocShell* pDocShell = pSourceView->GetDocShell();
if (pDocShell->HasName())
{
INetURLObject aTmp(pDocShell->GetMedium()->GetName());
m_xAttachmentED->set_text(aTmp.getName(
INetURLObject::LAST_SEGMENT, true, INetURLObject::DecodeMechanism::WithCharset ));
}
}
if (m_xAttachmentED->get_text().isEmpty())
{
OUString sAttach = "." + lcl_GetExtensionForDocType(m_xSendAsLB->get_active_id().toUInt32());
m_xAttachmentED->set_text(sAttach);
}
//select first column
uno::Reference< sdbcx::XColumnsSupplier > xColsSupp(xConfigItem->GetResultSet(), uno::UNO_QUERY);
//get the name of the actual columns
uno::Reference < container::XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : nullptr;
uno::Sequence< OUString > aFields;
if (xColAccess.is())
aFields = xColAccess->getElementNames();
// fill mail address and password ListBox
assert(m_xMailToLB->get_count() == 0);
assert(m_xPasswordLB->get_count() == 0);
for (const OUString& rField : aFields)
{
m_xMailToLB->append_text(rField);
m_xPasswordLB->append_text(rField);
}
m_xMailToLB->set_active(0);
m_xPasswordLB->set_active(0);
// then select the right one - may not be available
const std::vector<std::pair<OUString, int>>& rHeaders = xConfigItem->GetDefaultAddressHeaders();
OUString sEMailColumn = rHeaders[MM_PART_E_MAIL].first;
Sequence< OUString> aAssignment = xConfigItem->GetColumnAssignment(xConfigItem->GetCurrentDBData());
if (aAssignment.getLength() > MM_PART_E_MAIL && !aAssignment[MM_PART_E_MAIL].isEmpty())
sEMailColumn = aAssignment[MM_PART_E_MAIL];
if (int pos = m_xMailToLB->find_text(sEMailColumn); pos >= 0)
m_xMailToLB->set_active(pos);
// HTML format pre-selected
m_xSendAsLB->set_active(3);
SendTypeHdl_Impl(*m_xSendAsLB);
const sal_Int32 nCount = xConfigItem->GetMergedDocumentCount();
m_xFromNF->set_max(nCount);
m_xToNF->set_max(nCount);
m_xToNF->set_value(nCount);
}
IMPL_LINK_NOARG(SwMMResultSaveDialog, DocumentSelectionHdl_Impl, weld::Toggleable&, void)
{
bool bEnableFromTo = m_xFromRB->get_active();
m_xFromNF->set_sensitive(bEnableFromTo);
m_xToFT->set_sensitive(bEnableFromTo);
m_xToNF->set_sensitive(bEnableFromTo);
}
IMPL_LINK_NOARG(SwMMResultEmailDialog, CheckHdl, weld::Toggleable&, void)
{
bool bEnable = m_xPasswordCB->get_active();
m_xPasswordFT->set_sensitive(bEnable);
m_xPasswordLB->set_sensitive(bEnable);
}
IMPL_LINK_NOARG(SwMMResultPrintDialog, DocumentSelectionHdl_Impl, weld::Toggleable&, void)
{
bool bEnableFromTo = m_xFromRB->get_active();
m_xFromNF->set_sensitive(bEnableFromTo);
m_xToFT->set_sensitive(bEnableFromTo);
m_xToNF->set_sensitive(bEnableFromTo);
}
IMPL_LINK_NOARG(SwMMResultEmailDialog, DocumentSelectionHdl_Impl, weld::Toggleable&, void)
{
bool bEnableFromTo = m_xFromRB->get_active();
m_xFromNF->set_sensitive(bEnableFromTo);
m_xToFT->set_sensitive(bEnableFromTo);
m_xToNF->set_sensitive(bEnableFromTo);
}
IMPL_LINK_NOARG(SwMMResultEmailDialog, CopyToHdl_Impl, weld::Button&, void)
{
SwCopyToDialog aDlg(m_xDialog.get());
aDlg.SetCC(m_sCC );
aDlg.SetBCC(m_sBCC);
if (aDlg.run() == RET_OK)
{
m_sCC = aDlg.GetCC() ;
m_sBCC = aDlg.GetBCC();
}
}
namespace {
int documentStartPageNumber(SwMailMergeConfigItem* pConfigItem, int document, bool bIgnoreEmpty)
{
SwView* pTargetView = pConfigItem->GetTargetView();
assert( pTargetView );
SwCursorShell& shell = pTargetView->GetWrtShell();
const SwDocMergeInfo& info = pConfigItem->GetDocumentMergeInfo(document);
sal_uInt16 page;
shell.Push();
shell.GotoMark( info.startPageInTarget );
if (!bIgnoreEmpty)
shell.GetPageNum(page, o3tl::temporary(sal_uInt16()));
else
page = shell.GetPageNumSeqNonEmpty();
shell.Pop(SwCursorShell::PopMode::DeleteCurrent);
return page;
}
int documentEndPageNumber(SwMailMergeConfigItem* pConfigItem, int document, bool bIgnoreEmpty)
{
SwView* pTargetView = pConfigItem->GetTargetView();
assert( pTargetView );
SwWrtShell& shell = pTargetView->GetWrtShell();
shell.Push();
if (document < int(pConfigItem->GetMergedDocumentCount()) - 1)
{
// Go to the page before the starting page of the next merged document.
const SwDocMergeInfo& info = pConfigItem->GetDocumentMergeInfo( document + 1 );
shell.GotoMark( info.startPageInTarget );
shell.EndPrvPg();
}
else
{ // This is the last merged document, so it ends on the page at which the document ends.
shell.SttEndDoc( false ); // go to doc end
}
sal_uInt16 page;
if (!bIgnoreEmpty)
shell.GetPageNum(page, o3tl::temporary(sal_uInt16()));
else
page = shell.GetPageNumSeqNonEmpty();
shell.Pop(SwCursorShell::PopMode::DeleteCurrent);
return page;
}
} // anonymous namespace
IMPL_LINK_NOARG(SwMMResultSaveDialog, SaveOutputHdl_Impl, weld::Button&, void)
{
SwView* pView = GetActiveView();
if (!pView)
return;
std::shared_ptr<SwMailMergeConfigItem> xConfigItem = pView->GetMailMergeConfigItem();
assert(xConfigItem);
const sal_uInt32 nDocumentCount = xConfigItem->GetMergedDocumentCount();
sal_uInt32 nBegin = 0;
sal_uInt32 nEnd = nDocumentCount;
if (m_xFromRB->get_active())
{
nBegin = static_cast<sal_Int32>(m_xFromNF->get_value() - 1);
nEnd = static_cast<sal_Int32>(m_xToNF->get_value());
if (nEnd > nDocumentCount)
nEnd = nDocumentCount;
}
xConfigItem->SetBeginEnd(nBegin, nEnd);
if (!xConfigItem->GetTargetView())
SwDBManager::PerformMailMerge(pView);
SwView* pTargetView = xConfigItem->GetTargetView();
assert(pTargetView);
OUString sFilter;
OUString sPath = SwMailMergeHelper::CallSaveAsDialog(m_xDialog.get(), sFilter);
if (sPath.isEmpty())
{
// just return back to the dialog
return;
}
if (m_xSaveAsOneRB->get_active())
{
uno::Sequence< beans::PropertyValue > aValues { comphelper::makePropertyValue(u"FilterName"_ustr, sFilter) };
uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY);
ErrCode nErrorCode = ERRCODE_NONE;
try
{
xStore->storeToURL( sPath, aValues );
}
catch (const task::ErrorCodeIOException& rErrorEx)
{
nErrorCode = ErrCode(rErrorEx.ErrCode);
}
catch (const Exception&)
{
nErrorCode = ERRCODE_IO_GENERAL;
}
if( nErrorCode != ERRCODE_NONE )
{
SfxErrorContext aEc(ERRCTX_SFX_SAVEASDOC, pTargetView->GetDocShell()->GetTitle());
ErrorHandler::HandleError( nErrorCode );
}
}
else
{
OUString sTargetTempURL = URIHelper::SmartRel2Abs(
INetURLObject(), utl::CreateTempName(),
URIHelper::GetMaybeFileHdl());
std::shared_ptr<const SfxFilter> pSfxFlt = SwIoSystem::GetFilterOfFormat(
FILTER_XML,
SwDocShell::Factory().GetFilterContainer() );
uno::Sequence< beans::PropertyValue > aValues(1);
beans::PropertyValue* pValues = aValues.getArray();
pValues[0].Name = "FilterName";
pValues[0].Value <<= pSfxFlt->GetFilterName();
uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY);
ErrCode nErrorCode = ERRCODE_NONE;
try
{
xStore->storeToURL( sTargetTempURL, aValues );
}
catch (const task::ErrorCodeIOException& rErrorEx)
{
nErrorCode = ErrCode(rErrorEx.ErrCode);
}
catch (const Exception&)
{
nErrorCode = ERRCODE_IO_GENERAL;
}
if( nErrorCode != ERRCODE_NONE )
{
SfxErrorContext aEc(ERRCTX_SFX_SAVEASDOC, pTargetView->GetDocShell()->GetTitle());
ErrorHandler::HandleError( nErrorCode );
}
SwView* pSourceView = xConfigItem->GetSourceView();
auto xSaveMonitor = std::make_shared<SaveMonitor>(m_xDialog.get());
xSaveMonitor->m_xDocName->set_label(pSourceView->GetDocShell()->GetTitle(22));
xSaveMonitor->m_xPrinter->set_label( INetURLObject( sPath ).getFSysPath( FSysStyle::Detect ) );
m_bCancelSaving = false;
weld::DialogController::runAsync(xSaveMonitor, [this, &xSaveMonitor](sal_Int32 nResult){
if (nResult == RET_CANCEL)
m_bCancelSaving = true;
xSaveMonitor.reset();
});
for(sal_uInt32 nDoc = 0; nDoc < nEnd - nBegin && !m_bCancelSaving; ++nDoc)
{
INetURLObject aURL(sPath);
OUString sExtension = aURL.getExtension();
if (sExtension.isEmpty())
{
sExtension = pSfxFlt->GetWildcard().getGlob().getToken(1, '.');
sPath += "." + sExtension;
}
OUString sStat = SwResId(STR_STATSTR_LETTER) + " " + OUString::number(nDoc + 1);
xSaveMonitor->m_xPrintInfo->set_label(sStat);
//now extract a document from the target document
// the shell will be closed at the end, but it is more safe to use SfxObjectShellLock here
SfxObjectShellLock xTempDocShell( new SwDocShell( SfxObjectCreateMode::STANDARD ) );
xTempDocShell->DoInitNew();
SfxViewFrame* pTempFrame = SfxViewFrame::LoadHiddenDocument( *xTempDocShell, SFX_INTERFACE_NONE );
SwView* pTempView = static_cast<SwView*>( pTempFrame->GetViewShell() );
pTargetView->GetWrtShell().StartAction();
SwgReaderOption aOpt;
aOpt.SetTextFormats( true );
aOpt.SetFrameFormats( true );
aOpt.SetPageDescs( true );
aOpt.SetNumRules( true );
aOpt.SetMerge( false );
pTempView->GetDocShell()->LoadStylesFromFile(
sTargetTempURL, aOpt, true );
pTempView->GetDocShell()->GetDoc()->ReplaceCompatibilityOptions( *pTargetView->GetDocShell()->GetDoc());
pTempView->GetDocShell()->GetDoc()->ReplaceDefaults( *pTargetView->GetDocShell()->GetDoc());
pTempView->GetDocShell()->GetDoc()->ReplaceDocumentProperties( *pTargetView->GetDocShell()->GetDoc(), true );
rtl::Reference<SwXTextDocument> const xThisSet(
pTargetView->GetDocShell()->GetBaseModel());
rtl::Reference<SwXTextDocument> const xRetSet(
pTempView->GetDocShell()->GetBaseModel());
uno::Sequence<beans::PropertyValue> aInteropGrabBag;
xThisSet->getPropertyValue(u"InteropGrabBag"_ustr) >>= aInteropGrabBag;
xRetSet->setPropertyValue(u"InteropGrabBag"_ustr, uno::Any(aInteropGrabBag));
pTargetView->GetWrtShell().PastePages(
pTempView->GetWrtShell(), documentStartPageNumber(xConfigItem.get(), nDoc, false),
documentEndPageNumber(xConfigItem.get(), nDoc, false));
pTargetView->GetWrtShell().EndAction();
//then save it
OUString sOutPath = aURL.GetMainURL(INetURLObject::DecodeMechanism::ToIUri);
OUString sCounter = "_" + OUString::number(nDoc + 1);
sOutPath = sOutPath.replaceAt( sOutPath.getLength() - sExtension.getLength() - 1, 0, sCounter);
while(true)
{
//time for other slots is needed
Scheduler::ProcessEventsToIdle();
bool bFailed = false;
try
{
pValues[0].Value <<= sFilter;
uno::Reference< frame::XStorable > xTempStore( xTempDocShell->GetModel(), uno::UNO_QUERY);
xTempStore->storeToURL( sOutPath, aValues );
}
catch (const uno::Exception&)
{
bFailed = true;
}
if(bFailed)
{
std::unique_ptr<SwSaveWarningBox_Impl> xWarning(new SwSaveWarningBox_Impl(m_xDialog.get(), sOutPath));
if (RET_OK == xWarning->run())
sOutPath = xWarning->GetFileName();
else
{
xTempDocShell->DoClose();
m_xDialog->response(RET_OK);
return;
}
}
else
{
xTempDocShell->DoClose();
m_xDialog->response(RET_OK);
break;
}
}
}
if (xSaveMonitor)
xSaveMonitor->response(RET_OK);
::osl::File::remove( sTargetTempURL );
}
m_xDialog->response(RET_OK);
}
IMPL_LINK(SwMMResultPrintDialog, PrinterChangeHdl_Impl, weld::ComboBox&, rBox, void)
{
SwView* pView = GetActiveView();
if (!pView)
return;
const std::shared_ptr<SwMailMergeConfigItem>& xConfigItem = pView->GetMailMergeConfigItem();
assert(xConfigItem);
if (rBox.get_active() != -1)
{
const QueueInfo* pInfo = Printer::GetQueueInfo( rBox.get_active_text(), false );
if( pInfo )
{
if ( !m_pTempPrinter )
{
m_pTempPrinter = VclPtr<Printer>::Create( *pInfo );
}
else
{
if( (m_pTempPrinter->GetName() != pInfo->GetPrinterName()) ||
(m_pTempPrinter->GetDriverName() != pInfo->GetDriver()) )
{
m_pTempPrinter.disposeAndClear();
m_pTempPrinter = VclPtr<Printer>::Create( *pInfo );
}
}
}
else if( ! m_pTempPrinter )
m_pTempPrinter = VclPtr<Printer>::Create();
m_xPrinterSettingsPB->set_sensitive(m_pTempPrinter->HasSupport(PrinterSupport::SetupDialog));
}
else
m_xPrinterSettingsPB->set_sensitive(false);
xConfigItem->SetSelectedPrinter(rBox.get_active_text());
}
IMPL_LINK_NOARG(SwMMResultPrintDialog, PrintHdl_Impl, weld::Button&, void)
{
SwView* pView = GetActiveView();
if (!pView)
return;
std::shared_ptr<SwMailMergeConfigItem> xConfigItem = pView->GetMailMergeConfigItem();
assert(xConfigItem);
const sal_uInt32 nDocumentCount = xConfigItem->GetMergedDocumentCount();
sal_uInt32 nBegin = 0;
sal_uInt32 nEnd = nDocumentCount;
if (m_xFromRB->get_active())
{
nBegin = static_cast<sal_Int32>(m_xFromNF->get_value() - 1);
nEnd = static_cast<sal_Int32>(m_xToNF->get_value());
if (nEnd > nDocumentCount)
nEnd = nDocumentCount;
}
xConfigItem->SetBeginEnd(nBegin, nEnd);
if(!xConfigItem->GetTargetView())
SwDBManager::PerformMailMerge(pView);
SwView* pTargetView = xConfigItem->GetTargetView();
assert(pTargetView);
// If we skip autoinserted blanks, then the page numbers used in the print range string
// refer to the non-blank pages as they appear in the document (see tdf#89708).
const bool bIgnoreEmptyPages =
!pTargetView->GetDocShell()->GetDoc()->getIDocumentDeviceAccess().getPrintData().IsPrintEmptyPages();
const int nStartPage = documentStartPageNumber(xConfigItem.get(), 0, bIgnoreEmptyPages);
const int nEndPage = documentEndPageNumber(xConfigItem.get(), nEnd - nBegin - 1, bIgnoreEmptyPages);
const OUString sPages(OUString::number(nStartPage) + "-" + OUString::number(nEndPage));
pTargetView->SetMailMergeConfigItem(xConfigItem);
if(m_pTempPrinter)
{
SfxPrinter *const pDocumentPrinter = pTargetView->GetWrtShell()
.getIDocumentDeviceAccess().getPrinter(true);
pDocumentPrinter->SetPrinterProps(m_pTempPrinter);
// this should be able to handle setting its own printer
pTargetView->SetPrinter(pDocumentPrinter);
}
SfxObjectShell* pObjSh = pTargetView->GetViewFrame().GetObjectShell();
SfxGetpApp()->NotifyEvent(SfxEventHint(SfxEventHintId::SwMailMerge, SwDocShell::GetEventName(STR_SW_EVENT_MAIL_MERGE), pObjSh));
uno::Sequence aProps{ comphelper::makePropertyValue(u"MonitorVisible"_ustr, true),
comphelper::makePropertyValue(u"Pages"_ustr, sPages) };
pTargetView->ExecPrint( aProps, false, true );
SfxGetpApp()->NotifyEvent(SfxEventHint(SfxEventHintId::SwMailMergeEnd, SwDocShell::GetEventName(STR_SW_EVENT_MAIL_MERGE_END), pObjSh));
m_xDialog->response(RET_OK);
}
IMPL_LINK_NOARG(SwMMResultPrintDialog, PrinterSetupHdl_Impl, weld::Button&, void)
{
if (m_pTempPrinter)
m_pTempPrinter->Setup(m_xDialog.get());
}
IMPL_LINK(SwMMResultEmailDialog, SendTypeHdl_Impl, weld::ComboBox&, rBox, void)
{
auto nDocType = rBox.get_active_id().toUInt32();
bool bEnable = MM_DOCTYPE_HTML != nDocType && MM_DOCTYPE_TEXT != nDocType;
bool bIsPDF = nDocType == MM_DOCTYPE_PDF;
m_xSendAsPB->set_sensitive(bEnable);
m_xAttachmentGroup->set_sensitive(bEnable);
if(bEnable)
{
//add the correct extension
OUString sAttach(m_xAttachmentED->get_text());
//do nothing if the user has removed the name - the warning will come early enough
if (!sAttach.isEmpty())
{
sal_Int32 nTokenCount = comphelper::string::getTokenCount(sAttach, '.');
if( 2 > nTokenCount)
{
sAttach += ".";
++nTokenCount;
}
sAttach = comphelper::string::setToken(sAttach, nTokenCount - 1, '.', lcl_GetExtensionForDocType( nDocType ));
m_xAttachmentED->set_text(sAttach);
}
}
if(bIsPDF)
{
m_xPasswordCB->set_sensitive(true);
m_xPasswordFT->set_sensitive(true);
m_xPasswordLB->set_sensitive(true);
CheckHdl(*m_xPasswordCB);
}
else
{
m_xPasswordCB->set_sensitive(false);
m_xPasswordFT->set_sensitive(false);
m_xPasswordLB->set_sensitive(false);
}
}
IMPL_LINK_NOARG(SwMMResultEmailDialog, SendAsHdl_Impl, weld::Button&, void)
{
if (SwView* pView = GetActiveView())
{
SwMailBodyDialog aDlg(m_xDialog.get(), pView->GetMailMergeConfigItem());
aDlg.SetBody(m_sBody);
if (RET_OK == aDlg.run())
{
m_sBody = aDlg.GetBody();
}
}
}
// Send documents as e-mail
IMPL_LINK_NOARG(SwMMResultEmailDialog, SendDocumentsHdl_Impl, weld::Button&, void)
{
SwView* pView = GetActiveView();
if (!pView)
return;
std::shared_ptr<SwMailMergeConfigItem> xConfigItem = pView->GetMailMergeConfigItem();
assert(xConfigItem);
const sal_uInt32 nDocumentCount = xConfigItem->GetMergedDocumentCount();
sal_uInt32 nBegin = 0;
sal_uInt32 nEnd = nDocumentCount;
if (m_xFromRB->get_active())
{
nBegin = static_cast<sal_Int32>(m_xFromNF->get_value() - 1);
nEnd = static_cast<sal_Int32>(m_xToNF->get_value());
if (nEnd > nDocumentCount)
nEnd = nDocumentCount;
}
xConfigItem->SetBeginEnd(nBegin, nEnd);
if (!xConfigItem->GetTargetView())
SwDBManager::PerformMailMerge(pView);
//get the composed document
SwView* pTargetView = xConfigItem->GetTargetView();
SAL_WARN_IF(!pTargetView, "sw.ui", "No TargetView in SwMailMergeConfigItem");
if (xConfigItem->GetMailServer().isEmpty() ||
!SwMailMergeHelper::CheckMailAddress(xConfigItem->GetMailAddress()) )
{
std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(m_xDialog.get(),
VclMessageType::Question, VclButtonsType::YesNo,
m_sConfigureMail));
xQueryBox->add_button(GetStandardText(StandardButtonType::Cancel), RET_CANCEL);
sal_uInt16 nRet = xQueryBox->run();
if (RET_YES == nRet )
{
SwView* pConfigView = pTargetView ? pTargetView : pView;
SfxAllItemSet aSet(pConfigView->GetPool());
SwMailConfigDlg aDlg(m_xDialog.get(), aSet);
nRet = aDlg.run();
}
if(nRet != RET_OK && nRet != RET_YES)
return; // back to the dialog
// SwMailConfigDlg writes mail merge email settings only to (global) config,
// so copy them to the existing config item
lcl_UpdateEmailSettingsFromGlobalConfig(*xConfigItem);
}
//add the documents
bool bAsBody = false;
rtl_TextEncoding eEncoding = ::osl_getThreadTextEncoding();
SfxFilterContainer* pFilterContainer = SwDocShell::Factory().GetFilterContainer();
std::shared_ptr<const SfxFilter> pSfxFlt;
auto nDocType = m_xSendAsLB->get_active_id().toUInt32();
OUString sExtension = lcl_GetExtensionForDocType(nDocType);
switch( nDocType )
{
case MM_DOCTYPE_OOO:
{
//Make sure we don't pick e.g. the flat xml filter
//for this format
pSfxFlt = pFilterContainer->GetFilter4FilterName(
u"writer8"_ustr,
SfxFilterFlags::EXPORT);
}
break;
case MM_DOCTYPE_PDF:
{
pSfxFlt = pFilterContainer->GetFilter4FilterName(
u"writer_pdf_Export"_ustr,
SfxFilterFlags::EXPORT);
}
break;
case MM_DOCTYPE_WORD:
{
//the method SwIOSystemGetFilterOfFormat( ) returns the template filter
//because it uses the same user data :-(
SfxFilterMatcher aMatcher( pFilterContainer->GetName() );
SfxFilterMatcherIter aIter( aMatcher );
std::shared_ptr<const SfxFilter> pFilter = aIter.First();
while ( pFilter )
{
if( pFilter->GetUserData() == FILTER_WW8 && pFilter->CanExport() )
{
pSfxFlt = pFilter;
break;
}
pFilter = aIter.Next();
}
}
break;
case MM_DOCTYPE_HTML:
{
bAsBody = true;
eEncoding = RTL_TEXTENCODING_UTF8;
}
break;
case MM_DOCTYPE_TEXT:
{
bAsBody = true;
pSfxFlt = pFilterContainer->GetFilter4FilterName(
u"Text (encoded)"_ustr, SfxFilterFlags::EXPORT);
}
break;
}
if(!pSfxFlt)
pSfxFlt = pFilterContainer->GetFilter4Extension(sExtension, SfxFilterFlags::EXPORT);
if(!pSfxFlt)
{
m_xDialog->response(RET_OK);
return;
}
OUString sMimeType = pSfxFlt->GetMimeType();
if (m_xSubjectED->get_text().isEmpty())
{
std::unique_ptr<SwSendQueryBox_Impl> xQuery(new SwSendQueryBox_Impl(m_xDialog.get(), u"SubjectDialog"_ustr,
u"modules/swriter/ui/subjectdialog.ui"_ustr));
xQuery->SetIsEmptyTextAllowed(true);
xQuery->SetValue(u""_ustr);
if(RET_OK == xQuery->run())
{
if (!xQuery->GetValue().isEmpty())
m_xSubjectED->set_text(xQuery->GetValue());
}
else
return; // back to the dialog
}
if(!bAsBody && m_xAttachmentED->get_text().isEmpty())
{
std::unique_ptr<SwSendQueryBox_Impl> xQuery(new SwSendQueryBox_Impl(m_xDialog.get(), u"AttachNameDialog"_ustr,
u"modules/swriter/ui/attachnamedialog.ui"_ustr));
xQuery->SetIsEmptyTextAllowed(false);
if (RET_OK == xQuery->run())
{
OUString sAttach(xQuery->GetValue());
sal_Int32 nTokenCount = comphelper::string::getTokenCount(sAttach, '.');
if (2 > nTokenCount)
{
sAttach += ".";
++nTokenCount;
}
sAttach = comphelper::string::setToken(sAttach, nTokenCount - 1, '.', lcl_GetExtensionForDocType(
m_xSendAsLB->get_active_id().toUInt32()));
m_xAttachmentED->set_text(sAttach);
}
else
return; // back to the dialog
}
OUString sEMailColumn = m_xMailToLB->get_active_text();
OSL_ENSURE( !sEMailColumn.isEmpty(), "No email column selected");
Reference< sdbcx::XColumnsSupplier > xColsSupp( xConfigItem->GetResultSet(), UNO_QUERY);
Reference < container::XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : nullptr;
if(sEMailColumn.isEmpty() || !xColAccess.is() || !xColAccess->hasByName(sEMailColumn))
{
m_xDialog->response(RET_OK);
return;
}
OUString sPasswordColumn = m_xPasswordLB->get_active_text();
OSL_ENSURE( !sPasswordColumn.isEmpty(), "No password column selected");
if(sPasswordColumn.isEmpty() || !xColAccess.is() || !xColAccess->hasByName(sPasswordColumn))
{
m_xDialog->response(RET_OK);
return;
}
OUString sFilterOptions;
if(MM_DOCTYPE_TEXT == nDocType)
{
SwAsciiOptions aOpt;
sal_uInt16 nAppScriptType = SvtLanguageOptions::GetI18NScriptTypeOfLanguage( GetAppLanguage() );
TypedWhichId<SvxLanguageItem> nWhich = GetWhichOfScript( RES_CHRATR_LANGUAGE, nAppScriptType);
const SvxLanguageItem& rDefLangItem = pTargetView->GetWrtShell().GetDefault( nWhich );
aOpt.SetLanguage( rDefLangItem.GetLanguage() );
aOpt.SetParaFlags( LINEEND_CR );
aOpt.WriteUserData( sFilterOptions );
}
else if(MM_DOCTYPE_HTML == nDocType)
{
sFilterOptions = "EmbedImages";
}
OUString sTargetTempURL = URIHelper::SmartRel2Abs(
INetURLObject(), utl::CreateTempName(),
URIHelper::GetMaybeFileHdl());
std::shared_ptr<const SfxFilter> pTargetSfxFlt = SwIoSystem::GetFilterOfFormat(
FILTER_XML,
SwDocShell::Factory().GetFilterContainer() );
uno::Sequence< beans::PropertyValue > aValues { comphelper::makePropertyValue(u"FilterName"_ustr, pTargetSfxFlt->GetFilterName()) };
uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY);
xStore->storeToURL( sTargetTempURL, aValues );
//create the send dialog
std::shared_ptr<SwSendMailDialog> xDlg = std::make_shared<SwSendMailDialog>(Application::GetDefDialogParent(), *xConfigItem);
xDlg->StartSend(nEnd - nBegin);
weld::DialogController::runAsync(xDlg, [](sal_Int32 /*nResult*/){});
//help to force painting the dialog
//TODO/CLEANUP
//predetermined breaking point
Application::Reschedule( true );
m_xDialog->response(RET_OK);
for(sal_uInt32 nDoc = 0; nDoc < nEnd - nBegin; ++nDoc)
{
SwDocMergeInfo& rInfo = xConfigItem->GetDocumentMergeInfo(nDoc);
//now extract a document from the target document
// the shell will be closed at the end, but it is more safe to use SfxObjectShellLock here
SfxObjectShellLock xTempDocShell( new SwDocShell( SfxObjectCreateMode::STANDARD ) );
xTempDocShell->DoInitNew();
SfxViewFrame* pTempFrame = SfxViewFrame::LoadHiddenDocument( *xTempDocShell, SFX_INTERFACE_NONE );
SwView* pTempView = static_cast<SwView*>( pTempFrame->GetViewShell() );
pTargetView->GetWrtShell().StartAction();
SwgReaderOption aOpt;
aOpt.SetTextFormats( true );
aOpt.SetFrameFormats( true );
aOpt.SetPageDescs( true );
aOpt.SetNumRules( true );
aOpt.SetMerge( false );
pTempView->GetDocShell()->LoadStylesFromFile(
sTargetTempURL, aOpt, true );
pTempView->GetDocShell()->GetDoc()->ReplaceCompatibilityOptions( *pTargetView->GetDocShell()->GetDoc());
pTempView->GetDocShell()->GetDoc()->ReplaceDefaults( *pTargetView->GetDocShell()->GetDoc());
pTempView->GetDocShell()->GetDoc()->ReplaceDocumentProperties( *pTargetView->GetDocShell()->GetDoc(), true );
pTargetView->GetWrtShell().PastePages(
pTempView->GetWrtShell(), documentStartPageNumber(xConfigItem.get(), nDoc, false),
documentEndPageNumber(xConfigItem.get(), nDoc, false));
pTargetView->GetWrtShell().EndAction();
//then save it
SfxStringItem aName(SID_FILE_NAME,
URIHelper::SmartRel2Abs(
INetURLObject(), utl::CreateTempName(),
URIHelper::GetMaybeFileHdl()) );
{
bool withFilterOptions = MM_DOCTYPE_TEXT == nDocType || MM_DOCTYPE_HTML == nDocType;
bool withPasswordOptions = m_xPasswordCB->get_active();
sal_Int32 nTarget = xConfigItem->MoveResultSet(rInfo.nDBRow);
OSL_ENSURE( nTarget == rInfo.nDBRow, "row of current document could not be selected");
OUString sPassword = lcl_GetColumnValueOf(sPasswordColumn, xColAccess);
sal_Int32 nOptionCount = (withFilterOptions && withPasswordOptions) ? 4 : withPasswordOptions ? 3 : withFilterOptions ? 2 : 1;
sal_Int32 nOpt = 0;
uno::Sequence< beans::PropertyValue > aFilterValues(nOptionCount);
beans::PropertyValue* pFilterValues = aFilterValues.getArray();
pFilterValues[nOpt].Name = "FilterName";
pFilterValues[nOpt].Value <<= pSfxFlt->GetFilterName();
if(withFilterOptions)
{
nOpt++;
pFilterValues[nOpt].Name = "FilterOptions";
pFilterValues[nOpt].Value <<= sFilterOptions;
}
if(withPasswordOptions)
{
nOpt++;
pFilterValues[nOpt].Name = "EncryptFile";
pFilterValues[nOpt].Value <<= true;
nOpt++;
pFilterValues[nOpt].Name = "DocumentOpenPassword";
pFilterValues[nOpt].Value <<= sPassword;
}
uno::Reference< frame::XStorable > xTempStore( pTempView->GetDocShell()->GetModel(), uno::UNO_QUERY);
xTempStore->storeToURL( aName.GetValue(), aFilterValues );
}
xTempDocShell->DoClose();
sal_Int32 nTarget = xConfigItem->MoveResultSet(rInfo.nDBRow);
OSL_ENSURE( nTarget == rInfo.nDBRow, "row of current document could not be selected");
OSL_ENSURE( !sEMailColumn.isEmpty(), "No email column selected");
OUString sEMail = lcl_GetColumnValueOf(sEMailColumn, xColAccess);
SwMailDescriptor aDesc;
aDesc.sEMail = sEMail;
OUStringBuffer sBody;
if(bAsBody)
{
{
//read in the temporary file and use it as mail body
SfxMedium aMedium( aName.GetValue(), StreamMode::READ);
SvStream* pInStream = aMedium.GetInStream();
if(pInStream)
pInStream->SetStreamCharSet( eEncoding );
else
{
OSL_FAIL("no output file created?");
continue;
}
OStringBuffer sLine;
bool bDone = pInStream->ReadLine( sLine );
while ( bDone )
{
sBody.append( OStringToOUString(sLine, eEncoding) + "\n");
bDone = pInStream->ReadLine( sLine );
}
}
//remove the temporary file
SWUnoHelper::UCB_DeleteFile( aName.GetValue() );
}
else
{
sBody = m_sBody;
aDesc.sAttachmentURL = aName.GetValue();
OUString sAttachment(m_xAttachmentED->get_text());
sal_Int32 nTokenCount = comphelper::string::getTokenCount(sAttachment, '.');
if (2 > nTokenCount)
{
sAttachment += ".";
sAttachment = comphelper::string::setToken(sAttachment, nTokenCount, '.', sExtension);
}
else if (o3tl::getToken(sAttachment, nTokenCount - 1, '.') != sExtension)
sAttachment += sExtension;
aDesc.sAttachmentName = sAttachment;
aDesc.sMimeType = sMimeType;
if (xConfigItem->IsGreetingLine(true))
{
OUString sNameColumn = xConfigItem->GetAssignedColumn(MM_PART_LASTNAME);
OUString sName = lcl_GetColumnValueOf(sNameColumn, xColAccess);
OUString sGreeting;
if(!sName.isEmpty() && xConfigItem->IsIndividualGreeting(true))
{
OUString sGenderColumn = xConfigItem->GetAssignedColumn(MM_PART_GENDER);
const OUString& sFemaleValue = xConfigItem->GetFemaleGenderValue();
OUString sGenderValue = lcl_GetColumnValueOf(sGenderColumn, xColAccess);
SwMailMergeConfigItem::Gender eGenderType = sGenderValue == sFemaleValue ?
SwMailMergeConfigItem::FEMALE :
SwMailMergeConfigItem::MALE;
sGreeting = SwAddressPreview::FillData(
xConfigItem->GetGreetings(eGenderType)
[xConfigItem->GetCurrentGreeting(eGenderType)],
*xConfigItem);
}
else
{
sGreeting =
xConfigItem->GetGreetings(SwMailMergeConfigItem::NEUTRAL)
[xConfigItem->GetCurrentGreeting(SwMailMergeConfigItem::NEUTRAL)];
}
sGreeting += "\n";
sBody.insert(0, sGreeting);
}
}
aDesc.sBodyContent = sBody.makeStringAndClear();
if(MM_DOCTYPE_HTML == nDocType)
{
aDesc.sBodyMimeType = "text/html; charset=" +
OUString::createFromAscii(rtl_getBestMimeCharsetFromTextEncoding( eEncoding ));
}
else
aDesc.sBodyMimeType = "text/plain; charset=UTF-8; format=flowed";
aDesc.sSubject = m_xSubjectED->get_text();
aDesc.sCC = m_sCC;
aDesc.sBCC = m_sBCC;
xDlg->AddDocument( aDesc );
//help to force painting the dialog
Application::Reschedule( true );
//stop creating of data when dialog has been closed
if (!xDlg->getDialog()->get_visible())
{
break;
}
}
xDlg->EnableDestruction();
::osl::File::remove( sTargetTempURL );
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'LoadStylesFromFile' is required to be utilized.
↑ V530 The return value of function 'LoadStylesFromFile' is required to be utilized.