/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <memory>
#include <o3tl/unit_conversion.hxx>
#include <sfx2/objsh.hxx>
#include <sfx2/printer.hxx>
#include <sfx2/viewsh.hxx>
#include <svl/cjkoptions.hxx>
#include <svl/ctloptions.hxx>
#include <svtools/unitconv.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld/weld.hxx>
#include <sfx2/htmlmode.hxx>
#include <osl/diagnose.h>
#include <tools/debug.hxx>
#include <svx/strings.hrc>
#include <svx/dialmgr.hxx>
#include <page.hxx>
#include <svx/pageitem.hxx>
#include <editeng/brushitem.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/shaditem.hxx>
#include <editeng/pbinitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/ulspitem.hxx>
#include <editeng/sizeitem.hxx>
#include <editeng/frmdiritem.hxx>
#include <svx/dlgutil.hxx>
#include <editeng/paperinf.hxx>
#include <svl/stritem.hxx>
#include <editeng/eerdll.hxx>
#include <editeng/editrids.hrc>
#include <svx/svxids.hrc>
#include <svl/slstitm.hxx>
#include <svx/xdef.hxx>
#include <svx/unobrushitemhelper.hxx>
#include <svx/SvxNumOptionsTabPageHelper.hxx>
#include <sal/log.hxx>
#include <svl/grabbagitem.hxx>
#include <officecfg/Office/Common.hxx>
#include <comphelper/servicehelper.hxx>
#include <svx/unomodel.hxx>
// static ----------------------------------------------------------------
// #i19922# - tdf#126051 see svx/source/dialog/hdft.cxx and sw/source/uibase/sidebar/PageMarginControl.hxx
constexpr tools::Long MINBODY = o3tl::toTwips(1, o3tl::Length::mm); // 1mm in twips rounded
const WhichRangesContainer SvxPageDescPage::pRanges(
svl::Items<
SID_ATTR_BORDER_OUTER, SID_ATTR_BORDER_SHADOW,
SID_ATTR_LRSPACE, SID_ATTR_PAGE_SHARED,
SID_SWREGISTER_COLLECTION, SID_SWREGISTER_MODE,
SID_ATTR_RESIZE_ALL_PAGES, SID_ATTR_RESIZE_ALL_PAGES>);
// ------- Mapping page layout ------------------------------------------
const SvxPageUsage aArr[] =
{
SvxPageUsage::All,
SvxPageUsage::Mirror,
SvxPageUsage::Right,
SvxPageUsage::Left
};
static sal_uInt16 PageUsageToPos_Impl( SvxPageUsage nUsage )
{
for ( size_t i = 0; i < std::size(aArr); ++i )
if ( aArr[i] == nUsage )
return i;
return 3;
}
static SvxPageUsage PosToPageUsage_Impl( sal_uInt16 nPos )
{
if ( nPos >= std::size(aArr) )
return SvxPageUsage::NONE;
return aArr[nPos];
}
static Size GetMinBorderSpace_Impl( const SvxShadowItem& rShadow, const SvxBoxItem& rBox )
{
Size aSz;
aSz.setHeight( rShadow.CalcShadowSpace( SvxShadowItemSide::BOTTOM ) + rBox.CalcLineSpace( SvxBoxItemLine::BOTTOM ) );
aSz.AdjustHeight(rShadow.CalcShadowSpace( SvxShadowItemSide::TOP ) + rBox.CalcLineSpace( SvxBoxItemLine::TOP ) );
aSz.setWidth( rShadow.CalcShadowSpace( SvxShadowItemSide::LEFT ) + rBox.CalcLineSpace( SvxBoxItemLine::LEFT ) );
aSz.AdjustWidth(rShadow.CalcShadowSpace( SvxShadowItemSide::RIGHT ) + rBox.CalcLineSpace( SvxBoxItemLine::RIGHT ) );
return aSz;
}
static tools::Long ConvertLong_Impl( const tools::Long nIn, MapUnit eUnit )
{
return OutputDevice::LogicToLogic( nIn, eUnit, MapUnit::MapTwip );
}
static bool IsEqualSize_Impl( const SvxSizeItem* pSize, const Size& rSize )
{
if ( pSize )
{
Size aSize = pSize->GetSize();
tools::Long nDiffW = std::abs( rSize.Width () - aSize.Width () );
tools::Long nDiffH = std::abs( rSize.Height() - aSize.Height() );
return ( nDiffW < 10 && nDiffH < 10 );
}
else
return false;
}
#define MARGIN_LEFT ( MarginPosition(0x0001) )
#define MARGIN_RIGHT ( MarginPosition(0x0002) )
#define MARGIN_TOP ( MarginPosition(0x0004) )
#define MARGIN_BOTTOM ( MarginPosition(0x0008) )
// class SvxPageDescPage --------------------------------------------------
std::unique_ptr<SfxTabPage> SvxPageDescPage::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet )
{
return std::make_unique<SvxPageDescPage>(pPage, pController, *rSet);
}
SvxPageDescPage::SvxPageDescPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rAttr)
: SfxTabPage(pPage, pController, u"cui/ui/pageformatpage.ui"_ustr, u"PageFormatPage"_ustr, &rAttr)
, bLandscape(false)
, eMode(SVX_PAGE_MODE_STANDARD)
, ePaperStart(PAPER_A3)
, m_nPos(0)
, mpDefPrinter(nullptr)
, mbDelPrinter(false)
, mbEnableDrawingLayerFillStyles(false)
, m_xPaperSizeBox(new SvxPaperSizeListBox(m_xBuilder->weld_combo_box(u"comboPageFormat"_ustr)))
, m_xPaperWidthEdit(m_xBuilder->weld_metric_spin_button(u"spinWidth"_ustr, FieldUnit::CM))
, m_xPaperHeightEdit(m_xBuilder->weld_metric_spin_button(u"spinHeight"_ustr, FieldUnit::CM))
, m_xPortraitBtn(m_xBuilder->weld_radio_button(u"radiobuttonPortrait"_ustr))
, m_xLandscapeBtn(m_xBuilder->weld_radio_button(u"radiobuttonLandscape"_ustr))
, m_xTextFlowLbl(m_xBuilder->weld_label(u"labelTextFlow"_ustr))
, m_xTextFlowBox(new svx::FrameDirectionListBox(m_xBuilder->weld_combo_box(u"comboTextFlowBox"_ustr)))
, m_xResizeAllPages(m_xBuilder->weld_check_button(u"checkResizeAllPages"_ustr))
, m_xPaperTrayBox(m_xBuilder->weld_combo_box(u"comboPaperTray"_ustr))
, m_xLeftMarginLbl(m_xBuilder->weld_label(u"labelLeftMargin"_ustr))
, m_xLeftMarginEdit(m_xBuilder->weld_metric_spin_button(u"spinMargLeft"_ustr, FieldUnit::CM))
, m_xRightMarginLbl(m_xBuilder->weld_label(u"labelRightMargin"_ustr))
, m_xRightMarginEdit(m_xBuilder->weld_metric_spin_button(u"spinMargRight"_ustr, FieldUnit::CM))
, m_xTopMarginEdit(m_xBuilder->weld_metric_spin_button(u"spinMargTop"_ustr, FieldUnit::CM))
, m_xBottomMarginEdit(m_xBuilder->weld_metric_spin_button(u"spinMargBot"_ustr, FieldUnit::CM))
, m_xGutterMarginLbl(m_xBuilder->weld_label(u"labelGutterMargin"_ustr))
, m_xGutterMarginEdit(m_xBuilder->weld_metric_spin_button(u"spinMargGut"_ustr, FieldUnit::CM))
, m_xPageText(m_xBuilder->weld_label(u"labelPageLayout"_ustr))
, m_xLayoutBox(m_xBuilder->weld_combo_box(u"comboPageLayout"_ustr))
, m_xNumberFormatText(m_xBuilder->weld_label(u"labelPageNumbers"_ustr))
, m_xNumberFormatBox(new SvxPageNumberListBox(m_xBuilder->weld_combo_box(u"comboLayoutFormat"_ustr)))
, m_xTblAlignFT(m_xBuilder->weld_label(u"labelTblAlign"_ustr))
, m_xHorzBox(m_xBuilder->weld_check_button(u"checkbuttonHorz"_ustr))
, m_xVertBox(m_xBuilder->weld_check_button(u"checkbuttonVert"_ustr))
, m_xAdaptBox(m_xBuilder->weld_check_button(u"checkAdaptBox"_ustr))
, m_xRegisterCB(m_xBuilder->weld_check_button(u"checkRegisterTrue"_ustr))
, m_xRegisterFT(m_xBuilder->weld_label(u"labelRegisterStyle"_ustr))
, m_xRegisterLB(m_xBuilder->weld_combo_box(u"comboRegisterStyle"_ustr))
, m_xGutterPositionFT(m_xBuilder->weld_label(u"labelGutterPosition"_ustr))
, m_xGutterPositionLB(m_xBuilder->weld_combo_box(u"comboGutterPosition"_ustr))
, m_xRtlGutterCB(m_xBuilder->weld_check_button(u"checkRtlGutter"_ustr))
, m_xBackgroundFullSizeCB(m_xBuilder->weld_check_button(u"checkBackgroundFullSize"_ustr))
// Strings stored in UI
, m_xInsideLbl(m_xBuilder->weld_label(u"labelInner"_ustr))
, m_xOutsideLbl(m_xBuilder->weld_label(u"labelOuter"_ustr))
, m_xPrintRangeQueryText(m_xBuilder->weld_label(u"labelMsg"_ustr))
, m_xBspWin(new weld::CustomWeld(*m_xBuilder, u"drawingareaPageDirection"_ustr, m_aBspWin))
{
m_xRegisterLB->set_size_request(m_xRegisterLB->get_approximate_digit_width() * 20, -1);
bBorderModified = false;
m_aBspWin.EnableRTL(false);
// this page needs ExchangeSupport
SetExchangeSupport();
bool bCJK = SvtCJKOptions::IsAsianTypographyEnabled();
bool bCTL = SvtCTLOptions::IsCTLFontEnabled();
bool bVertCTL = bCTL && SvtCTLOptions::IsCTLVerticalText();
bool bWeb = false;
const SfxUInt16Item* pHtmlModeItem = rAttr.GetItemIfSet(SID_HTML_MODE, false);
if (!pHtmlModeItem)
{
if (SfxObjectShell* pShell = SfxObjectShell::Current())
pHtmlModeItem = pShell->GetItem(SID_HTML_MODE);
}
if (pHtmlModeItem)
bWeb = 0 != (pHtmlModeItem->GetValue() & HTMLMODE_ON);
// fill text flow listbox with valid entries
m_xTextFlowBox->append(SvxFrameDirection::Horizontal_LR_TB, SvxResId(RID_SVXSTR_PAGEDIR_LTR_HORI));
if (bCTL)
m_xTextFlowBox->append(SvxFrameDirection::Horizontal_RL_TB, SvxResId(RID_SVXSTR_PAGEDIR_RTL_HORI));
// #109989# do not show vertical directions in Writer/Web
if (!bWeb && (bCJK || bVertCTL))
{
m_xTextFlowBox->append(SvxFrameDirection::Vertical_RL_TB, SvxResId(RID_SVXSTR_PAGEDIR_RTL_VERT));
m_xTextFlowBox->append(SvxFrameDirection::Vertical_LR_TB, SvxResId(RID_SVXSTR_PAGEDIR_LTR_VERT));
}
// #109989# show the text direction box in Writer/Web too
if( (bCJK || bCTL) &&
SfxItemState::UNKNOWN < rAttr.GetItemState(GetWhich( SID_ATTR_FRAMEDIRECTION )))
{
m_xTextFlowLbl->show();
m_xTextFlowBox->show();
m_xTextFlowBox->connect_changed(LINK(this, SvxPageDescPage, FrameDirectionModify_Impl));
m_aBspWin.EnableFrameDirection(true);
}
Init_Impl();
FieldUnit eFUnit = GetModuleFieldUnit( rAttr );
SetFieldUnit( *m_xLeftMarginEdit, eFUnit );
SetFieldUnit( *m_xRightMarginEdit, eFUnit );
SetFieldUnit( *m_xTopMarginEdit, eFUnit );
SetFieldUnit( *m_xBottomMarginEdit, eFUnit );
SetFieldUnit(*m_xGutterMarginEdit, eFUnit);
SetFieldUnit( *m_xPaperWidthEdit, eFUnit );
SetFieldUnit( *m_xPaperHeightEdit, eFUnit );
if ( SfxViewShell::Current() && SfxViewShell::Current()->GetPrinter() )
{
mpDefPrinter = SfxViewShell::Current()->GetPrinter();
}
else
{
mpDefPrinter = VclPtr<Printer>::Create();
mbDelPrinter = true;
}
MapMode aOldMode = mpDefPrinter->GetMapMode();
mpDefPrinter->SetMapMode(MapMode(MapUnit::MapTwip));
// set first- and last-values for the margins
Size aPaperSize = mpDefPrinter->GetPaperSize();
Size aPrintSize = mpDefPrinter->GetOutputSize();
/*
* To convert a point ( 0,0 ) into logic coordinates
* looks like nonsense; but it makes sense when the
* coordinate system's origin has been moved.
*/
Point aPrintOffset = mpDefPrinter->GetPageOffset() - mpDefPrinter->PixelToLogic( Point() );
mpDefPrinter->SetMapMode( aOldMode );
nFirstLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(aPrintOffset.X()), FieldUnit::TWIP);
nFirstRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X()), FieldUnit::TWIP);
nFirstTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(aPrintOffset.Y() ), FieldUnit::TWIP);
nFirstBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y()), FieldUnit::TWIP );
nLastLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(aPrintOffset.X() + aPrintSize.Width()), FieldUnit::TWIP);
nLastRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(aPrintOffset.X() + aPrintSize.Width()), FieldUnit::TWIP);
nLastTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(aPrintOffset.Y() + aPrintSize.Height()), FieldUnit::TWIP);
nLastBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(aPrintOffset.Y() + aPrintSize.Height()), FieldUnit::TWIP);
// #i4219# take Maximum now from configuration (1/100th cm)
// was: 11900 -> 119 cm ;new value 3 meters -> 300 cm -> 30000
m_xPaperWidthEdit->set_max(m_xPaperWidthEdit->normalize(officecfg::Office::Common::Drawinglayer::MaximumPaperWidth::get()), FieldUnit::CM);
m_xPaperHeightEdit->set_max(m_xPaperHeightEdit->normalize(officecfg::Office::Common::Drawinglayer::MaximumPaperHeight::get()), FieldUnit::CM);
// #i4219# also for margins (1/100th cm). Was: 9999, keeping.
m_xLeftMarginEdit->set_max(m_xLeftMarginEdit->normalize(officecfg::Office::Common::Drawinglayer::MaximumPaperLeftMargin::get()), FieldUnit::MM);
m_xRightMarginEdit->set_max(m_xRightMarginEdit->normalize(officecfg::Office::Common::Drawinglayer::MaximumPaperRightMargin::get()), FieldUnit::MM);
m_xTopMarginEdit->set_max(m_xTopMarginEdit->normalize(officecfg::Office::Common::Drawinglayer::MaximumPaperTopMargin::get()), FieldUnit::MM);
m_xBottomMarginEdit->set_max(m_xBottomMarginEdit->normalize(officecfg::Office::Common::Drawinglayer::MaximumPaperBottomMargin::get()), FieldUnit::MM);
m_xGutterMarginEdit->set_max(
m_xGutterMarginEdit->normalize(officecfg::Office::Common::Drawinglayer::MaximumPaperLeftMargin::get()),
FieldUnit::MM);
// Get the i18n framework numberings and add them to the listbox.
SvxNumOptionsTabPageHelper::GetI18nNumbering(m_xNumberFormatBox->get_widget(), std::numeric_limits<sal_uInt16>::max());
}
SvxPageDescPage::~SvxPageDescPage()
{
if(mbDelPrinter)
{
mpDefPrinter.disposeAndClear();
mbDelPrinter = false;
}
}
void SvxPageDescPage::Init_Impl()
{
// adjust the handler
m_xLayoutBox->connect_changed(LINK(this, SvxPageDescPage, LayoutHdl_Impl));
m_xGutterPositionLB->connect_changed(LINK(this, SvxPageDescPage, GutterPositionHdl_Impl));
m_xPaperSizeBox->connect_changed(LINK(this, SvxPageDescPage, PaperSizeSelect_Impl));
m_xPaperWidthEdit->connect_value_changed( LINK(this, SvxPageDescPage, PaperSizeModify_Impl));
m_xPaperHeightEdit->connect_value_changed(LINK(this, SvxPageDescPage, PaperSizeModify_Impl));
m_xLandscapeBtn->connect_toggled(LINK(this, SvxPageDescPage, SwapOrientation_Impl));
m_xPortraitBtn->connect_toggled(LINK(this, SvxPageDescPage, SwapOrientation_Impl));
Link<weld::MetricSpinButton&, void> aLink = LINK(this, SvxPageDescPage, BorderModify_Impl);
m_xLeftMarginEdit->connect_value_changed(aLink);
m_xRightMarginEdit->connect_value_changed(aLink);
m_xTopMarginEdit->connect_value_changed(aLink);
m_xBottomMarginEdit->connect_value_changed(aLink);
m_xGutterMarginEdit->connect_value_changed(aLink);
m_xHorzBox->connect_toggled(LINK(this, SvxPageDescPage, CenterHdl_Impl));
m_xVertBox->connect_toggled(LINK(this, SvxPageDescPage, CenterHdl_Impl));
}
void SvxPageDescPage::Reset( const SfxItemSet* rSet )
{
SfxItemPool* pPool = rSet->GetPool();
SAL_WARN_IF(!pPool, "cui.tabpages", "Where is the pool?");
MapUnit eUnit = pPool->GetMetric( GetWhich( SID_ATTR_LRSPACE ) );
// adjust margins (right/left)
if (const SvxLRSpaceItem* pLRSpace = GetItem( *rSet, SID_ATTR_LRSPACE ))
{
SetMetricValue(*m_xLeftMarginEdit, pLRSpace->ResolveLeft({}), eUnit);
SetMetricValue(*m_xGutterMarginEdit, pLRSpace->GetGutterMargin(), eUnit);
m_aBspWin.SetLeft(
static_cast<sal_uInt16>(ConvertLong_Impl(pLRSpace->ResolveLeft({}), eUnit)));
SetMetricValue(*m_xRightMarginEdit, pLRSpace->ResolveRight({}), eUnit);
m_aBspWin.SetRight(
static_cast<sal_uInt16>(ConvertLong_Impl(pLRSpace->ResolveRight({}), eUnit)));
}
// adjust margins (top/bottom)
if (const SvxULSpaceItem* pULSpace = GetItem( *rSet, SID_ATTR_ULSPACE ))
{
SetMetricValue( *m_xTopMarginEdit, pULSpace->GetUpper(), eUnit );
m_aBspWin.SetTop(
static_cast<sal_uInt16>(ConvertLong_Impl( static_cast<tools::Long>(pULSpace->GetUpper()), eUnit )) );
SetMetricValue( *m_xBottomMarginEdit, pULSpace->GetLower(), eUnit );
m_aBspWin.SetBottom(
static_cast<sal_uInt16>(ConvertLong_Impl( static_cast<tools::Long>(pULSpace->GetLower()), eUnit )) );
}
if (const SfxGrabBagItem* pGragbagItem = rSet->GetItemIfSet(SID_ATTR_CHAR_GRABBAG))
{
bool bGutterAtTop{};
auto it = pGragbagItem->GetGrabBag().find(u"GutterAtTop"_ustr);
if (it != pGragbagItem->GetGrabBag().end())
{
it->second >>= bGutterAtTop;
}
if (bGutterAtTop)
{
m_xGutterPositionLB->set_active(1);
}
else
{
// Left.
m_xGutterPositionLB->set_active(0);
}
it = pGragbagItem->GetGrabBag().find(u"RtlGutter"_ustr);
bool bRtlGutter{};
if (it != pGragbagItem->GetGrabBag().end())
{
it->second >>= bRtlGutter;
m_xRtlGutterCB->set_active(bRtlGutter);
m_xRtlGutterCB->show();
}
it = pGragbagItem->GetGrabBag().find(u"BackgroundFullSize"_ustr);
bool isBackgroundFullSize{};
if (it != pGragbagItem->GetGrabBag().end())
{
it->second >>= isBackgroundFullSize;
m_xBackgroundFullSizeCB->set_active(isBackgroundFullSize);
m_xBackgroundFullSizeCB->show();
}
}
if (rSet->HasItem(SID_ATTR_RESIZE_ALL_PAGES))
{
const SfxBoolItem& rItem = rSet->Get(SID_ATTR_RESIZE_ALL_PAGES);
m_xResizeAllPages->set_active(rItem.GetValue());
}
// general page data
SvxNumType eNumType = SVX_NUM_ARABIC;
bLandscape = ( mpDefPrinter->GetOrientation() == Orientation::Landscape );
SvxPageUsage nUse = SvxPageUsage::All;
if (const SvxPageItem* pItem = GetItem( *rSet, SID_ATTR_PAGE ))
{
eNumType = pItem->GetNumType();
nUse = pItem->GetPageUsage();
bLandscape = pItem->IsLandscape();
}
// alignment
m_xLayoutBox->set_active(::PageUsageToPos_Impl(nUse));
m_aBspWin.SetUsage( nUse );
LayoutHdl_Impl( *m_xLayoutBox );
//adjust numeration type of the page style
m_xNumberFormatBox->set_active_id(eNumType);
m_xPaperTrayBox->clear();
sal_uInt8 nPaperBin = PAPERBIN_PRINTER_SETTINGS;
if (const SvxPaperBinItem* pItem = GetItem( *rSet, SID_ATTR_PAGE_PAPERBIN ))
{
nPaperBin = pItem->GetValue();
if ( nPaperBin >= mpDefPrinter->GetPaperBinCount() )
nPaperBin = PAPERBIN_PRINTER_SETTINGS;
}
OUString aBinName;
if ( PAPERBIN_PRINTER_SETTINGS == nPaperBin )
aBinName = EditResId(RID_SVXSTR_PAPERBIN_SETTINGS);
else
aBinName = mpDefPrinter->GetPaperBinName( static_cast<sal_uInt16>(nPaperBin) );
m_xPaperTrayBox->append(OUString::number(nPaperBin), aBinName);
m_xPaperTrayBox->set_active_text(aBinName);
// reset focus handler to default first so know none already connected
m_xPaperTrayBox->connect_focus_in(Link<weld::Widget&, void>());
// update the list when widget gets focus
m_xPaperTrayBox->connect_focus_in(LINK(this, SvxPageDescPage, PaperBinHdl_Impl));
Size aPaperSize = SvxPaperInfo::GetPaperSize( mpDefPrinter );
if (const SvxSizeItem* pItem = GetItem( *rSet, SID_ATTR_PAGE_SIZE ))
aPaperSize = pItem->GetSize();
bool bOrientationSupport =
mpDefPrinter->HasSupport( PrinterSupport::SetOrientation );
if ( !bOrientationSupport &&
aPaperSize.Width() > aPaperSize.Height() )
bLandscape = true;
// tdf#130548 disable callbacks on the other of a pair of the radiogroup
// when toggling its partner
m_xLandscapeBtn->connect_toggled(Link<weld::Toggleable&, void>());
m_xPortraitBtn->connect_toggled(Link<weld::Toggleable&, void>());
m_xLandscapeBtn->set_active(bLandscape);
m_xPortraitBtn->set_active(!bLandscape);
m_xLandscapeBtn->connect_toggled(LINK(this, SvxPageDescPage, SwapOrientation_Impl));
m_xPortraitBtn->connect_toggled(LINK(this, SvxPageDescPage, SwapOrientation_Impl));
m_aBspWin.SetSize( Size( ConvertLong_Impl( aPaperSize.Width(), eUnit ),
ConvertLong_Impl( aPaperSize.Height(), eUnit ) ) );
aPaperSize = OutputDevice::LogicToLogic(aPaperSize, MapMode(eUnit), MapMode(MapUnit::Map100thMM));
if ( bLandscape )
Swap( aPaperSize );
// Actual Paper Format
Paper ePaper = SvxPaperInfo::GetSvxPaper( aPaperSize, MapUnit::Map100thMM );
if ( PAPER_USER != ePaper )
aPaperSize = SvxPaperInfo::GetPaperSize( ePaper, MapUnit::Map100thMM );
if ( bLandscape )
Swap( aPaperSize );
// write values into the edits
SetMetricValue( *m_xPaperHeightEdit, aPaperSize.Height(), MapUnit::Map100thMM );
SetMetricValue( *m_xPaperWidthEdit, aPaperSize.Width(), MapUnit::Map100thMM );
m_xPaperSizeBox->clear();
m_xPaperSizeBox->FillPaperSizeEntries( ( ePaperStart == PAPER_A3 ) ? PaperSizeApp::Std : PaperSizeApp::Draw );
m_xPaperSizeBox->set_active_id( ePaper );
// application specific
switch ( eMode )
{
case SVX_PAGE_MODE_CENTER:
{
m_xTblAlignFT->show();
m_xHorzBox->show();
m_xVertBox->show();
DisableVerticalPageDir();
// horizontal alignment
const SfxPoolItem* pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT1 );
m_xHorzBox->set_active(pItem && static_cast<const SfxBoolItem*>(pItem)->GetValue());
// vertical alignment
pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT2 );
m_xVertBox->set_active(pItem && static_cast<const SfxBoolItem*>(pItem)->GetValue());
// set example window on the table
m_aBspWin.SetTable( true );
m_aBspWin.SetHorz(m_xHorzBox->get_active());
m_aBspWin.SetVert(m_xVertBox->get_active());
m_xGutterMarginLbl->hide();
m_xGutterMarginEdit->hide();
m_xGutterPositionFT->hide();
m_xGutterPositionLB->hide();
break;
}
case SVX_PAGE_MODE_PRESENTATION:
{
DisableVerticalPageDir();
m_xAdaptBox->show();
const SfxPoolItem* pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT1 );
m_xAdaptBox->set_active( pItem &&
static_cast<const SfxBoolItem*>(pItem)->GetValue() );
//!!! hidden, because not implemented by StarDraw
m_xLayoutBox->hide();
m_xPageText->hide();
m_xGutterMarginLbl->hide();
m_xGutterMarginEdit->hide();
m_xGutterPositionFT->hide();
m_xGutterPositionLB->hide();
break;
}
default: ;//prevent warning
}
// display background and border in the example
ResetBackground_Impl( *rSet );
//! UpdateExample_Impl();
RangeHdl_Impl();
InitHeadFoot_Impl( *rSet );
bBorderModified = false;
SwapFirstValues_Impl( false );
UpdateExample_Impl();
m_xLeftMarginEdit->save_value();
m_xRightMarginEdit->save_value();
m_xTopMarginEdit->save_value();
m_xBottomMarginEdit->save_value();
m_xGutterMarginEdit->save_value();
m_xLayoutBox->save_value();
m_xNumberFormatBox->save_value();
m_xPaperSizeBox->save_value();
m_xPaperWidthEdit->save_value();
m_xPaperHeightEdit->save_value();
m_xResizeAllPages->save_state();
m_xPortraitBtn->save_state();
m_xLandscapeBtn->save_state();
m_xPaperTrayBox->save_value();
m_xVertBox->save_state();
m_xHorzBox->save_state();
m_xAdaptBox->save_state();
m_xGutterPositionLB->save_value();
m_xRtlGutterCB->save_state();
m_xBackgroundFullSizeCB->save_state();
CheckMarginEdits( true );
if(SfxItemState::SET == rSet->GetItemState(SID_SWREGISTER_MODE))
{
m_xRegisterCB->set_active(rSet->Get(SID_SWREGISTER_MODE).GetValue());
m_xRegisterCB->save_state();
RegisterModify(*m_xRegisterCB);
}
if(SfxItemState::SET == rSet->GetItemState(SID_SWREGISTER_COLLECTION))
{
m_xRegisterLB->set_active_text(
rSet->Get(SID_SWREGISTER_COLLECTION).GetValue());
m_xRegisterLB->save_value();
}
const SvxFrameDirectionItem* pItem = nullptr;
SfxItemState eState = rSet->GetItemState( GetWhich( SID_ATTR_FRAMEDIRECTION ),
true, &pItem );
if( SfxItemState::UNKNOWN != eState )
{
SvxFrameDirection nVal = SfxItemState::SET == eState
? pItem->GetValue()
: SvxFrameDirection::Horizontal_LR_TB;
m_xTextFlowBox->set_active_id(nVal);
m_xTextFlowBox->save_value();
m_aBspWin.SetFrameDirection(nVal);
}
}
void SvxPageDescPage::FillUserData()
{
if (SVX_PAGE_MODE_PRESENTATION == eMode)
SetUserData(m_xAdaptBox->get_active() ? u"1"_ustr : u"0"_ustr) ;
}
bool SvxPageDescPage::FillItemSet( SfxItemSet* rSet )
{
bool bModified = false;
const SfxItemSet& rOldSet = GetItemSet();
SfxItemPool* pPool = rOldSet.GetPool();
DBG_ASSERT( pPool, "Where is the pool?" );
sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE );
MapUnit eUnit = pPool->GetMetric( nWhich );
const SfxPoolItem* pOld = nullptr;
// copy old left and right margins
SvxLRSpaceItem aMargin( static_cast<const SvxLRSpaceItem&>(rOldSet.Get( nWhich )) );
// copy old top and bottom margins
nWhich = GetWhich( SID_ATTR_ULSPACE );
SvxULSpaceItem aTopMargin( static_cast<const SvxULSpaceItem&>(rOldSet.Get( nWhich )) );
if (m_xLeftMarginEdit->get_value_changed_from_saved())
{
aMargin.SetLeft(SvxIndentValue::twips(
static_cast<sal_uInt16>(GetCoreValue(*m_xLeftMarginEdit, eUnit))));
bModified = true;
}
if (m_xRightMarginEdit->get_value_changed_from_saved())
{
aMargin.SetRight(SvxIndentValue::twips(
static_cast<sal_uInt16>(GetCoreValue(*m_xRightMarginEdit, eUnit))));
bModified = true;
}
if (m_xGutterMarginEdit->get_value_changed_from_saved())
{
aMargin.SetGutterMargin(static_cast<sal_uInt16>(GetCoreValue(*m_xGutterMarginEdit, eUnit)));
bModified = true;
}
// set left and right margins
if (bModified)
{
pOld = GetOldItem( *rSet, SID_ATTR_LRSPACE );
if ( !pOld || *static_cast<const SvxLRSpaceItem*>(pOld) != aMargin )
rSet->Put( aMargin );
else
bModified = false;
}
if (rOldSet.HasItem(SID_ATTR_CHAR_GRABBAG))
{
// Set gutter position.
const SfxGrabBagItem& rOldGrabBagItem = rOldSet.Get(SID_ATTR_CHAR_GRABBAG);
std::map<OUString, css::uno::Any> aGrabBagMap = rOldGrabBagItem.GetGrabBag();
if (m_xGutterPositionLB->get_value_changed_from_saved())
{
bool bGutterAtTop = m_xGutterPositionLB->get_active() == 1;
aGrabBagMap[u"GutterAtTop"_ustr] <<= bGutterAtTop;
bModified = true;
}
if (m_xRtlGutterCB->get_state_changed_from_saved())
{
bool const bRtlGutter(m_xRtlGutterCB->get_active());
aGrabBagMap[u"RtlGutter"_ustr] <<= bRtlGutter;
bModified = true;
}
if (m_xBackgroundFullSizeCB->get_state_changed_from_saved())
{
bool const isBackgroundFullSize(m_xBackgroundFullSizeCB->get_active());
aGrabBagMap[u"BackgroundFullSize"_ustr] <<= isBackgroundFullSize;
bModified = true;
}
if (bModified)
{
if (rOldGrabBagItem.GetGrabBag() != aGrabBagMap)
rSet->Put(SfxGrabBagItem(SID_ATTR_CHAR_GRABBAG, std::move(aGrabBagMap)));
else
bModified = false;
}
}
bool bMod = false;
if (m_xTopMarginEdit->get_value_changed_from_saved())
{
aTopMargin.SetUpper( static_cast<sal_uInt16>(GetCoreValue( *m_xTopMarginEdit, eUnit )) );
bMod = true;
}
if (m_xBottomMarginEdit->get_value_changed_from_saved())
{
aTopMargin.SetLower( static_cast<sal_uInt16>(GetCoreValue( *m_xBottomMarginEdit, eUnit )) );
bMod = true;
}
// set top and bottom margins
if ( bMod )
{
pOld = GetOldItem( *rSet, SID_ATTR_ULSPACE );
if ( !pOld || *static_cast<const SvxULSpaceItem*>(pOld) != aTopMargin )
{
bModified = true;
rSet->Put( aTopMargin );
}
}
if (m_xResizeAllPages->get_state_changed_from_saved())
{
SfxBoolItem aResize (GetWhich(SID_ATTR_RESIZE_ALL_PAGES), m_xResizeAllPages->get_active());
rSet->Put(aResize);
bModified = true;
}
// paper tray
TypedWhichId<SvxPaperBinItem> nPaperWhich = GetWhich( SID_ATTR_PAGE_PAPERBIN );
sal_Int32 nPos = m_xPaperTrayBox->get_active();
sal_uInt16 nBin = m_xPaperTrayBox->get_id(nPos).toInt32();
pOld = GetOldItem( *rSet, SID_ATTR_PAGE_PAPERBIN );
if ( !pOld || static_cast<const SvxPaperBinItem*>(pOld)->GetValue() != nBin )
{
rSet->Put( SvxPaperBinItem( nPaperWhich, static_cast<sal_uInt8>(nBin) ) );
bModified = true;
}
Paper ePaper = m_xPaperSizeBox->get_active_id();
bool bChecked = m_xLandscapeBtn->get_active();
if ( PAPER_USER == ePaper )
{
if ( m_xPaperSizeBox->get_value_changed_from_saved() ||
m_xPaperWidthEdit->get_value_changed_from_saved() ||
m_xPaperHeightEdit->get_value_changed_from_saved() ||
m_xLandscapeBtn->get_state_changed_from_saved() )
{
Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ),
GetCoreValue( *m_xPaperHeightEdit, eUnit ) );
pOld = GetOldItem( *rSet, SID_ATTR_PAGE_SIZE );
if ( !pOld || static_cast<const SvxSizeItem*>(pOld)->GetSize() != aSize )
{
rSet->Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) );
bModified = true;
}
}
}
else
{
if (m_xPaperSizeBox->get_value_changed_from_saved() || m_xLandscapeBtn->get_state_changed_from_saved())
{
Size aSize( SvxPaperInfo::GetPaperSize( ePaper, eUnit ) );
if ( bChecked )
Swap( aSize );
pOld = GetOldItem( *rSet, SID_ATTR_PAGE_SIZE );
if ( !pOld || static_cast<const SvxSizeItem*>(pOld)->GetSize() != aSize )
{
rSet->Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) );
bModified = true;
}
}
}
nWhich = GetWhich( SID_ATTR_PAGE );
SvxPageItem aPage( static_cast<const SvxPageItem&>(rOldSet.Get( nWhich )) );
bMod = m_xLayoutBox->get_value_changed_from_saved();
if ( bMod )
aPage.SetPageUsage(::PosToPageUsage_Impl(m_xLayoutBox->get_active()));
if (m_xLandscapeBtn->get_state_changed_from_saved())
{
aPage.SetLandscape(bChecked);
bMod = true;
m_xLandscapeBtn->save_state();
m_xPortraitBtn->save_state();
}
//Get the NumType value
if (m_xNumberFormatBox->get_value_changed_from_saved())
{
SvxNumType nEntryData = m_xNumberFormatBox->get_active_id();
aPage.SetNumType( nEntryData );
bMod = true;
}
if ( bMod )
{
pOld = GetOldItem( *rSet, SID_ATTR_PAGE );
if ( !pOld || *static_cast<const SvxPageItem*>(pOld) != aPage )
{
rSet->Put( aPage );
bModified = true;
}
}
else if ( SfxItemState::DEFAULT == rOldSet.GetItemState( nWhich ) )
rSet->ClearItem( nWhich );
else
rSet->Put( rOldSet.Get( nWhich ) );
// evaluate mode specific controls
switch ( eMode )
{
case SVX_PAGE_MODE_CENTER:
{
if (m_xHorzBox->get_state_changed_from_saved())
{
SfxBoolItem aHorz( GetWhich( SID_ATTR_PAGE_EXT1 ),
m_xHorzBox->get_active() );
rSet->Put( aHorz );
bModified = true;
}
if (m_xVertBox->get_state_changed_from_saved())
{
SfxBoolItem aVert( GetWhich( SID_ATTR_PAGE_EXT2 ),
m_xVertBox->get_active() );
rSet->Put( aVert );
bModified = true;
}
break;
}
case SVX_PAGE_MODE_PRESENTATION:
{
// always put so that draw can evaluate this
rSet->Put( SfxBoolItem( GetWhich( SID_ATTR_PAGE_EXT1 ),
m_xAdaptBox->get_active() ) );
bModified = true;
break;
}
default: ;//prevent warning
}
if (m_xRegisterCB->get_visible() &&
(m_xRegisterCB->get_active() || m_xRegisterCB->get_state_changed_from_saved()))
{
const SfxBoolItem& rRegItem = rOldSet.Get(SID_SWREGISTER_MODE);
std::unique_ptr<SfxBoolItem> pRegItem(rRegItem.Clone());
bool bCheck = m_xRegisterCB->get_active();
pRegItem->SetValue(bCheck);
rSet->Put(std::move(pRegItem));
bModified = true;
if(bCheck)
{
bModified = true;
rSet->Put(SfxStringItem(SID_SWREGISTER_COLLECTION,
m_xRegisterLB->get_active_text()));
}
m_xRegisterCB->save_state();
}
if (m_xTextFlowBox->get_visible() && m_xTextFlowBox->get_value_changed_from_saved())
{
SvxFrameDirection eDirection = m_xTextFlowBox->get_active_id();
rSet->Put( SvxFrameDirectionItem( eDirection, GetWhich( SID_ATTR_FRAMEDIRECTION ) ) );
bModified = true;
}
return bModified;
}
IMPL_LINK_NOARG(SvxPageDescPage, LayoutHdl_Impl, weld::ComboBox&, void)
{
// switch inside outside
const SvxPageUsage nUsage = PosToPageUsage_Impl(m_xLayoutBox->get_active());
if (nUsage == SvxPageUsage::Mirror)
{
m_xLeftMarginLbl->hide();
m_xRightMarginLbl->hide();
m_xInsideLbl->show();
m_xOutsideLbl->show();
}
else
{
m_xLeftMarginLbl->show();
m_xRightMarginLbl->show();
m_xInsideLbl->hide();
m_xOutsideLbl->hide();
}
UpdateExample_Impl( true );
}
IMPL_LINK_NOARG(SvxPageDescPage, GutterPositionHdl_Impl, weld::ComboBox&, void)
{
UpdateExample_Impl(true);
}
IMPL_LINK_NOARG(SvxPageDescPage, PaperBinHdl_Impl, weld::Widget&, void)
{
// tdf#124226 disconnect so not called again, unless Reset occurs
m_xPaperTrayBox->connect_focus_in(Link<weld::Widget&, void>());
OUString aOldName = m_xPaperTrayBox->get_active_text();
m_xPaperTrayBox->freeze();
m_xPaperTrayBox->clear();
m_xPaperTrayBox->append(OUString::number(PAPERBIN_PRINTER_SETTINGS), EditResId(RID_SVXSTR_PAPERBIN_SETTINGS));
OUString aPaperBin(EditResId(RID_SVXSTR_PAPERBIN));
const sal_uInt16 nBinCount = mpDefPrinter->GetPaperBinCount();
for (sal_uInt16 i = 0; i < nBinCount; ++i)
{
OUString aName = mpDefPrinter->GetPaperBinName(i);
if (aName.isEmpty())
{
aName = aPaperBin + " " + OUString::number( i+1 );
}
m_xPaperTrayBox->append(OUString::number(i), aName);
}
m_xPaperTrayBox->thaw();
m_xPaperTrayBox->set_active_text(aOldName);
// tdf#123650 explicitly grab-focus after the modification otherwise gtk loses track
// of there the focus should be
m_xPaperTrayBox->grab_focus();
}
IMPL_LINK_NOARG(SvxPageDescPage, PaperSizeSelect_Impl, weld::ComboBox&, void)
{
Paper ePaper = m_xPaperSizeBox->get_active_id();
if ( ePaper == PAPER_USER )
return;
Size aSize( SvxPaperInfo::GetPaperSize( ePaper, MapUnit::Map100thMM ) );
if (m_xLandscapeBtn->get_active())
Swap( aSize );
if ( aSize.Height() < m_xPaperHeightEdit->get_min( FieldUnit::MM_100TH ) )
m_xPaperHeightEdit->set_min(
m_xPaperHeightEdit->normalize( aSize.Height() ), FieldUnit::MM_100TH );
if ( aSize.Width() < m_xPaperWidthEdit->get_min( FieldUnit::MM_100TH ) )
m_xPaperWidthEdit->set_min(
m_xPaperWidthEdit->normalize( aSize.Width() ), FieldUnit::MM_100TH );
SetMetricValue( *m_xPaperHeightEdit, aSize.Height(), MapUnit::Map100thMM );
SetMetricValue( *m_xPaperWidthEdit, aSize.Width(), MapUnit::Map100thMM );
CalcMargin_Impl();
RangeHdl_Impl();
UpdateExample_Impl( true );
if ( eMode != SVX_PAGE_MODE_PRESENTATION )
return;
// Draw: if paper format the margin shall be 1 cm
tools::Long nTmp = 0;
bool bScreen = (( PAPER_SCREEN_4_3 == ePaper )||( PAPER_SCREEN_16_9 == ePaper)||( PAPER_SCREEN_16_10 == ePaper)||( PAPER_WIDESCREEN == ePaper)||( PAPER_ONSCREENSHOW_4_3 == ePaper)||( PAPER_ONSCREENSHOW_16_9 == ePaper)||( PAPER_ONSCREENSHOW_16_10 == ePaper));
if ( !bScreen )
// no margin if screen
nTmp = 1; // accordingly 1 cm
if ( bScreen || m_xRightMarginEdit->get_value(FieldUnit::NONE) == 0 )
SetMetricValue( *m_xRightMarginEdit, nTmp, MapUnit::MapCM );
if ( bScreen || m_xLeftMarginEdit->get_value(FieldUnit::NONE) == 0 )
SetMetricValue( *m_xLeftMarginEdit, nTmp, MapUnit::MapCM );
if ( bScreen || m_xBottomMarginEdit->get_value(FieldUnit::NONE) == 0 )
SetMetricValue( *m_xBottomMarginEdit, nTmp, MapUnit::MapCM );
if ( bScreen || m_xTopMarginEdit->get_value(FieldUnit::NONE) == 0 )
SetMetricValue( *m_xTopMarginEdit, nTmp, MapUnit::MapCM );
UpdateExample_Impl( true );
}
IMPL_LINK_NOARG(SvxPageDescPage, PaperSizeModify_Impl, weld::MetricSpinButton&, void)
{
sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE );
MapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWhich );
Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ),
GetCoreValue( *m_xPaperHeightEdit, eUnit ) );
if ( aSize.Width() > aSize.Height() )
{
m_xLandscapeBtn->set_active(true);
bLandscape = true;
}
else
{
m_xPortraitBtn->set_active(true);
bLandscape = false;
}
Paper ePaper = SvxPaperInfo::GetSvxPaper( aSize, eUnit );
m_xPaperSizeBox->set_active_id( ePaper );
UpdateExample_Impl( true );
RangeHdl_Impl();
}
IMPL_LINK(SvxPageDescPage, SwapOrientation_Impl, weld::Toggleable&, rBtn, void)
{
if (!rBtn.get_active())
return;
bLandscape = m_xLandscapeBtn->get_active();
const tools::Long lWidth = GetCoreValue( *m_xPaperWidthEdit, MapUnit::Map100thMM );
const tools::Long lHeight = GetCoreValue( *m_xPaperHeightEdit, MapUnit::Map100thMM );
// swap width and height
SetMetricValue(*m_xPaperWidthEdit, lHeight, MapUnit::Map100thMM);
SetMetricValue(*m_xPaperHeightEdit, lWidth, MapUnit::Map100thMM);
// recalculate margins if necessary
CalcMargin_Impl();
PaperSizeSelect_Impl(m_xPaperSizeBox->get_widget());
RangeHdl_Impl();
SwapFirstValues_Impl(bBorderModified);
UpdateExample_Impl(true);
}
void SvxPageDescPage::SwapFirstValues_Impl( bool bSet )
{
MapMode aOldMode = mpDefPrinter->GetMapMode();
Orientation eOri = Orientation::Portrait;
if ( bLandscape )
eOri = Orientation::Landscape;
Orientation eOldOri = mpDefPrinter->GetOrientation();
mpDefPrinter->SetOrientation( eOri );
mpDefPrinter->SetMapMode(MapMode(MapUnit::MapTwip));
// set first- and last-values for margins
Size aPaperSize = mpDefPrinter->GetPaperSize();
Size aPrintSize = mpDefPrinter->GetOutputSize();
/*
* To convert a point ( 0,0 ) into logic coordinates
* looks like nonsense; but it makes sense if the
* coordinate system's origin has been moved.
*/
Point aPrintOffset = mpDefPrinter->GetPageOffset() - mpDefPrinter->PixelToLogic( Point() );
mpDefPrinter->SetMapMode( aOldMode );
mpDefPrinter->SetOrientation( eOldOri );
sal_Int64 nSetL = m_xLeftMarginEdit->denormalize(
m_xLeftMarginEdit->get_value( FieldUnit::TWIP ) );
sal_Int64 nSetR = m_xRightMarginEdit->denormalize(
m_xRightMarginEdit->get_value( FieldUnit::TWIP ) );
sal_Int64 nSetT = m_xTopMarginEdit->denormalize(
m_xTopMarginEdit->get_value( FieldUnit::TWIP ) );
sal_Int64 nSetB = m_xBottomMarginEdit->denormalize(
m_xBottomMarginEdit->get_value( FieldUnit::TWIP ) );
tools::Long nNewL = aPrintOffset.X();
tools::Long nNewR = aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X();
tools::Long nNewT = aPrintOffset.Y();
tools::Long nNewB = aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y();
nFirstLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(nNewL), FieldUnit::TWIP);
nFirstRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(nNewR), FieldUnit::TWIP);
nFirstTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(nNewT), FieldUnit::TWIP);
nFirstBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(nNewB), FieldUnit::TWIP);
if ( !bSet )
return;
if ( nSetL < nNewL )
m_xLeftMarginEdit->set_value( m_xLeftMarginEdit->normalize( nNewL ),
FieldUnit::TWIP );
if ( nSetR < nNewR )
m_xRightMarginEdit->set_value( m_xRightMarginEdit->normalize( nNewR ),
FieldUnit::TWIP );
if ( nSetT < nNewT )
m_xTopMarginEdit->set_value( m_xTopMarginEdit->normalize( nNewT ),
FieldUnit::TWIP );
if ( nSetB < nNewB )
m_xBottomMarginEdit->set_value( m_xBottomMarginEdit->normalize( nNewB ),
FieldUnit::TWIP );
}
IMPL_LINK_NOARG(SvxPageDescPage, BorderModify_Impl, weld::MetricSpinButton&, void)
{
if ( !bBorderModified )
bBorderModified = true;
UpdateExample_Impl();
RangeHdl_Impl();
}
void SvxPageDescPage::UpdateExample_Impl( bool bResetbackground )
{
// Size
Size aSize( GetCoreValue( *m_xPaperWidthEdit, MapUnit::MapTwip ),
GetCoreValue( *m_xPaperHeightEdit, MapUnit::MapTwip ) );
m_aBspWin.SetSize( aSize );
// Margins
bool bGutterAtTop = m_xGutterPositionLB->get_active() == 1;
tools::Long nTop = GetCoreValue(*m_xTopMarginEdit, MapUnit::MapTwip);
if (bGutterAtTop)
{
nTop += GetCoreValue(*m_xGutterMarginEdit, MapUnit::MapTwip);
}
m_aBspWin.SetTop(nTop);
m_aBspWin.SetBottom( GetCoreValue( *m_xBottomMarginEdit, MapUnit::MapTwip ) );
tools::Long nLeft = GetCoreValue(*m_xLeftMarginEdit, MapUnit::MapTwip);
if (!bGutterAtTop)
{
nLeft += GetCoreValue(*m_xGutterMarginEdit, MapUnit::MapTwip);
}
m_aBspWin.SetLeft(nLeft);
m_aBspWin.SetRight( GetCoreValue( *m_xRightMarginEdit, MapUnit::MapTwip ) );
// Layout
m_aBspWin.SetUsage(PosToPageUsage_Impl(m_xLayoutBox->get_active()));
if ( bResetbackground )
m_aBspWin.ResetBackground();
m_aBspWin.Invalidate();
}
void SvxPageDescPage::ResetBackground_Impl(const SfxItemSet& rSet)
{
sal_uInt16 nWhich(GetWhich(SID_ATTR_PAGE_HEADERSET));
if (SfxItemState::SET == rSet.GetItemState(nWhich, false))
{
const SvxSetItem& rSetItem = static_cast< const SvxSetItem& >(rSet.Get(nWhich, false));
const SfxItemSet& rTmpSet = rSetItem.GetItemSet();
const SfxBoolItem& rOn = rTmpSet.Get(GetWhich(SID_ATTR_PAGE_ON));
if(rOn.GetValue())
{
drawinglayer::attribute::SdrAllFillAttributesHelperPtr aHeaderFillAttributes;
if(mbEnableDrawingLayerFillStyles)
{
// create FillAttributes directly from DrawingLayer FillStyle entries
aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rTmpSet);
}
else
{
nWhich = GetWhich(SID_ATTR_BRUSH);
if(SfxItemState::SET == rTmpSet.GetItemState(nWhich))
{
// create FillAttributes from SvxBrushItem
const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rTmpSet.Get(nWhich));
SfxItemSet aTempSet(SfxItemSet::makeFixedSfxItemSet<XATTR_FILL_FIRST, XATTR_FILL_LAST>(*rTmpSet.GetPool()));
setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
}
}
m_aBspWin.setHeaderFillAttributes(aHeaderFillAttributes);
}
}
nWhich = GetWhich(SID_ATTR_PAGE_FOOTERSET);
if (SfxItemState::SET == rSet.GetItemState(nWhich, false))
{
const SvxSetItem& rSetItem = static_cast< const SvxSetItem& >(rSet.Get(nWhich,false));
const SfxItemSet& rTmpSet = rSetItem.GetItemSet();
const SfxBoolItem& rOn = rTmpSet.Get(GetWhich(SID_ATTR_PAGE_ON));
if(rOn.GetValue())
{
drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFooterFillAttributes;
if(mbEnableDrawingLayerFillStyles)
{
// create FillAttributes directly from DrawingLayer FillStyle entries
aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rTmpSet);
}
else
{
nWhich = GetWhich(SID_ATTR_BRUSH);
if(SfxItemState::SET == rTmpSet.GetItemState(nWhich))
{
// create FillAttributes from SvxBrushItem
const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rTmpSet.Get(nWhich));
SfxItemSet aTempSet(SfxItemSet::makeFixedSfxItemSet<XATTR_FILL_FIRST, XATTR_FILL_LAST>(*rTmpSet.GetPool()));
setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
}
}
m_aBspWin.setFooterFillAttributes(aFooterFillAttributes);
}
}
drawinglayer::attribute::SdrAllFillAttributesHelperPtr aPageFillAttributes;
if(mbEnableDrawingLayerFillStyles)
{
// create FillAttributes directly from DrawingLayer FillStyle entries
aPageFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rSet);
}
else
{
const SfxPoolItem* pItem = GetItem(rSet, SID_ATTR_BRUSH);
if(pItem)
{
// create FillAttributes from SvxBrushItem
const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(*pItem);
SfxItemSet aTempSet(SfxItemSet::makeFixedSfxItemSet<XATTR_FILL_FIRST, XATTR_FILL_LAST>(*rSet.GetPool()));
setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
aPageFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
}
}
m_aBspWin.setPageFillAttributes(aPageFillAttributes);
}
void SvxPageDescPage::InitHeadFoot_Impl( const SfxItemSet& rSet )
{
bLandscape = m_xLandscapeBtn->get_active();
if (const SvxSizeItem* pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE ))
m_aBspWin.SetSize( pItem->GetSize() );
const SvxSetItem* pSetItem = nullptr;
// evaluate header attributes
if ( SfxItemState::SET ==
rSet.GetItemState( GetWhich( SID_ATTR_PAGE_HEADERSET ),
false, &pSetItem ) )
{
const SfxItemSet& rHeaderSet = pSetItem->GetItemSet();
const SfxBoolItem& rHeaderOn =
rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );
if ( rHeaderOn.GetValue() )
{
const SvxSizeItem& rSize =
rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) );
const SvxULSpaceItem& rUL =
rHeaderSet.Get( GetWhich( SID_ATTR_ULSPACE ) );
tools::Long nDist = rUL.GetLower();
m_aBspWin.SetHdHeight( rSize.GetSize().Height() - nDist );
m_aBspWin.SetHdDist( nDist );
const SvxLRSpaceItem& rLR =
rHeaderSet.Get( GetWhich( SID_ATTR_LRSPACE ) );
m_aBspWin.SetHdLeft(rLR.ResolveLeft({}));
m_aBspWin.SetHdRight(rLR.ResolveRight({}));
m_aBspWin.SetHeader( true );
}
else
m_aBspWin.SetHeader( false );
// show background and border in the example
drawinglayer::attribute::SdrAllFillAttributesHelperPtr aHeaderFillAttributes;
if(mbEnableDrawingLayerFillStyles)
{
// create FillAttributes directly from DrawingLayer FillStyle entries
aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rHeaderSet);
}
else
{
const sal_uInt16 nWhich(GetWhich(SID_ATTR_BRUSH));
if(rHeaderSet.GetItemState(nWhich) >= SfxItemState::DEFAULT)
{
// aBspWin.SetHdColor(rItem.GetColor());
const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rHeaderSet.Get(nWhich));
SfxItemSet aTempSet(SfxItemSet::makeFixedSfxItemSet<XATTR_FILL_FIRST, XATTR_FILL_LAST>(*rHeaderSet.GetPool()));
setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
aHeaderFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
}
}
m_aBspWin.setHeaderFillAttributes(aHeaderFillAttributes);
}
// evaluate footer attributes
if ( SfxItemState::SET !=
rSet.GetItemState( GetWhich( SID_ATTR_PAGE_FOOTERSET ),
false, reinterpret_cast<const SfxPoolItem**>(&pSetItem) ) )
return;
const SfxItemSet& rFooterSet = pSetItem->GetItemSet();
const SfxBoolItem& rFooterOn =
rFooterSet.Get( GetWhich( SID_ATTR_PAGE_ON ) );
if ( rFooterOn.GetValue() )
{
const SvxSizeItem& rSize =
rFooterSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) );
const SvxULSpaceItem& rUL =
rFooterSet.Get( GetWhich( SID_ATTR_ULSPACE ) );
tools::Long nDist = rUL.GetUpper();
m_aBspWin.SetFtHeight( rSize.GetSize().Height() - nDist );
m_aBspWin.SetFtDist( nDist );
const SvxLRSpaceItem& rLR =
rFooterSet.Get( GetWhich( SID_ATTR_LRSPACE ) );
m_aBspWin.SetFtLeft(rLR.ResolveLeft({}));
m_aBspWin.SetFtRight(rLR.ResolveRight({}));
m_aBspWin.SetFooter( true );
}
else
m_aBspWin.SetFooter( false );
// show background and border in the example
drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFooterFillAttributes;
if(mbEnableDrawingLayerFillStyles)
{
// create FillAttributes directly from DrawingLayer FillStyle entries
aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(rFooterSet);
}
else
{
const sal_uInt16 nWhich(GetWhich(SID_ATTR_BRUSH));
if(rFooterSet.GetItemState(nWhich) >= SfxItemState::DEFAULT)
{
// aBspWin.SetFtColor(rItem.GetColor());
const SvxBrushItem& rItem = static_cast<const SvxBrushItem&>(rFooterSet.Get(nWhich));
SfxItemSet aTempSet(SfxItemSet::makeFixedSfxItemSet<XATTR_FILL_FIRST, XATTR_FILL_LAST>(*rFooterSet.GetPool()));
setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet);
aFooterFillAttributes = std::make_shared<drawinglayer::attribute::SdrAllFillAttributesHelper>(aTempSet);
}
}
m_aBspWin.setFooterFillAttributes(aFooterFillAttributes);
}
void SvxPageDescPage::ActivatePage( const SfxItemSet& rSet )
{
InitHeadFoot_Impl( rSet );
UpdateExample_Impl();
ResetBackground_Impl( rSet );
RangeHdl_Impl();
}
DeactivateRC SvxPageDescPage::DeactivatePage( SfxItemSet* _pSet )
{
// Inquiry whether the page margins are beyond the printing area.
// If not, ask user whether they shall be taken.
// If not, stay on the TabPage.
Paper ePaper = m_xPaperSizeBox->get_active_id();
if ( ePaper != PAPER_SCREEN_4_3 && ePaper != PAPER_SCREEN_16_9 && ePaper != PAPER_SCREEN_16_10 && ePaper != PAPER_WIDESCREEN && ePaper != PAPER_ONSCREENSHOW_4_3 && ePaper != PAPER_ONSCREENSHOW_16_9 && ePaper != PAPER_ONSCREENSHOW_16_10 && IsMarginOutOfRange() )
{
std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(GetFrameWeld(),
VclMessageType::Question, VclButtonsType::YesNo,
m_xPrintRangeQueryText->get_label()));
xQueryBox->set_default_response(RET_NO);
if (xQueryBox->run() == RET_NO)
{
weld::MetricSpinButton* pField = nullptr;
if ( IsPrinterRangeOverflow( *m_xLeftMarginEdit, nFirstLeftMargin, nLastLeftMargin, MARGIN_LEFT ) )
pField = m_xLeftMarginEdit.get();
if ( IsPrinterRangeOverflow( *m_xRightMarginEdit, nFirstRightMargin, nLastRightMargin, MARGIN_RIGHT )
&& !pField )
pField = m_xRightMarginEdit.get();
if ( IsPrinterRangeOverflow( *m_xTopMarginEdit, nFirstTopMargin, nLastTopMargin, MARGIN_TOP )
&& !pField )
pField = m_xTopMarginEdit.get();
if ( IsPrinterRangeOverflow( *m_xBottomMarginEdit, nFirstBottomMargin, nLastBottomMargin, MARGIN_BOTTOM )
&& !pField )
pField = m_xBottomMarginEdit.get();
if ( pField )
pField->grab_focus();
UpdateExample_Impl();
return DeactivateRC::KeepPage;
}
else
CheckMarginEdits( false );
}
if ( _pSet )
{
FillItemSet( _pSet );
// put portray/landscape if applicable
sal_uInt16 nWh = GetWhich( SID_ATTR_PAGE_SIZE );
MapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWh );
Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ),
GetCoreValue( *m_xPaperHeightEdit, eUnit ) );
// put, if current size is different to the value in _pSet
const SvxSizeItem* pSize = GetItem( *_pSet, SID_ATTR_PAGE_SIZE );
if ( aSize.Width() && ( !pSize || !IsEqualSize_Impl( pSize, aSize ) ) )
_pSet->Put( SvxSizeItem( nWh, aSize ) );
}
return DeactivateRC::LeavePage;
}
void SvxPageDescPage::RangeHdl_Impl()
{
// example window
tools::Long nHHeight = m_aBspWin.GetHdHeight();
tools::Long nHDist = m_aBspWin.GetHdDist();
tools::Long nFHeight = m_aBspWin.GetFtHeight();
tools::Long nFDist = m_aBspWin.GetFtDist();
tools::Long nHFLeft = std::max(m_aBspWin.GetHdLeft(), m_aBspWin.GetFtLeft());
tools::Long nHFRight = std::max(m_aBspWin.GetHdRight(), m_aBspWin.GetFtRight());
// current values for page margins
tools::Long nBT = static_cast<tools::Long>(m_xTopMarginEdit->denormalize(m_xTopMarginEdit->get_value(FieldUnit::TWIP)));
tools::Long nBB = static_cast<tools::Long>(m_xBottomMarginEdit->denormalize(m_xBottomMarginEdit->get_value(FieldUnit::TWIP)));
tools::Long nBL = static_cast<tools::Long>(m_xLeftMarginEdit->denormalize(m_xLeftMarginEdit->get_value(FieldUnit::TWIP)));
tools::Long nBR = static_cast<tools::Long>(m_xRightMarginEdit->denormalize(m_xRightMarginEdit->get_value(FieldUnit::TWIP)));
// calculate width of page border
const SfxItemSet* _pSet = &GetItemSet();
Size aBorder;
if ( _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_SHADOW) ) >=
SfxItemState::DEFAULT &&
_pSet->GetItemState( GetWhich(SID_ATTR_BORDER_OUTER) ) >=
SfxItemState::DEFAULT )
{
aBorder = GetMinBorderSpace_Impl(
_pSet->Get(GetWhich(SID_ATTR_BORDER_SHADOW)),
_pSet->Get(GetWhich(SID_ATTR_BORDER_OUTER)));
}
// limits paper
// maximum is 54 cm
tools::Long nMin = nHHeight + nHDist + nFDist + nFHeight + nBT + nBB +
MINBODY + aBorder.Height();
m_xPaperHeightEdit->set_min(m_xPaperHeightEdit->normalize(nMin), FieldUnit::TWIP);
nMin = MINBODY + nBL + nBR + aBorder.Width();
m_xPaperWidthEdit->set_min(m_xPaperWidthEdit->normalize(nMin), FieldUnit::TWIP);
tools::Long nH = static_cast<tools::Long>(m_xPaperHeightEdit->denormalize(m_xPaperHeightEdit->get_value(FieldUnit::TWIP)));
tools::Long nW = static_cast<tools::Long>(m_xPaperWidthEdit->denormalize(m_xPaperWidthEdit->get_value(FieldUnit::TWIP)));
// Top
tools::Long nMax = nH - nBB - aBorder.Height() - MINBODY -
nFDist - nFHeight - nHDist - nHHeight;
m_xTopMarginEdit->set_max(m_xTopMarginEdit->normalize(nMax), FieldUnit::TWIP);
// Bottom
nMax = nH - nBT - aBorder.Height() - MINBODY -
nFDist - nFHeight - nHDist - nHHeight;
m_xBottomMarginEdit->set_max(m_xTopMarginEdit->normalize(nMax), FieldUnit::TWIP);
// Left
nMax = nW - nBR - MINBODY - aBorder.Width() - nHFLeft - nHFRight;
m_xLeftMarginEdit->set_max(m_xLeftMarginEdit->normalize(nMax), FieldUnit::TWIP);
// Right
nMax = nW - nBL - MINBODY - aBorder.Width() - nHFLeft - nHFRight;
m_xRightMarginEdit->set_max(m_xRightMarginEdit->normalize(nMax), FieldUnit::TWIP);
}
void SvxPageDescPage::CalcMargin_Impl()
{
// current values for page margins
tools::Long nBT = GetCoreValue( *m_xTopMarginEdit, MapUnit::MapTwip );
tools::Long nBB = GetCoreValue( *m_xBottomMarginEdit, MapUnit::MapTwip );
tools::Long nBL = GetCoreValue( *m_xLeftMarginEdit, MapUnit::MapTwip );
tools::Long nBR = GetCoreValue( *m_xRightMarginEdit, MapUnit::MapTwip );
tools::Long nH = GetCoreValue( *m_xPaperHeightEdit, MapUnit::MapTwip );
tools::Long nW = GetCoreValue( *m_xPaperWidthEdit, MapUnit::MapTwip );
tools::Long nWidth = nBL + nBR + MINBODY;
tools::Long nHeight = nBT + nBB + MINBODY;
if ( nWidth <= nW && nHeight <= nH )
return;
if ( nWidth > nW )
{
tools::Long nTmp = nBL <= nBR ? nBR : nBL;
nTmp -= nWidth - nW;
if ( nBL <= nBR )
SetMetricValue( *m_xRightMarginEdit, nTmp, MapUnit::MapTwip );
else
SetMetricValue( *m_xLeftMarginEdit, nTmp, MapUnit::MapTwip );
}
if ( nHeight > nH )
{
tools::Long nTmp = nBT <= nBB ? nBB : nBT;
nTmp -= nHeight - nH;
if ( nBT <= nBB )
SetMetricValue( *m_xBottomMarginEdit, nTmp, MapUnit::MapTwip );
else
SetMetricValue( *m_xTopMarginEdit, nTmp, MapUnit::MapTwip );
}
}
IMPL_LINK_NOARG(SvxPageDescPage, CenterHdl_Impl, weld::Toggleable&, void)
{
m_aBspWin.SetHorz(m_xHorzBox->get_active());
m_aBspWin.SetVert(m_xVertBox->get_active());
UpdateExample_Impl();
}
void SvxPageDescPage::SetCollectionList(const std::vector<OUString> &aList)
{
OSL_ENSURE(!aList.empty(), "Empty string list");
sStandardRegister = aList[0];
m_xRegisterLB->freeze();
for (size_t i = 1; i < aList.size(); ++i)
m_xRegisterLB->append_text(aList[i]);
m_xRegisterLB->thaw();
m_xRegisterCB->show();
m_xRegisterFT->show();
m_xRegisterLB->show();
m_xRegisterCB->connect_toggled(LINK(this, SvxPageDescPage, RegisterModify));
}
IMPL_LINK(SvxPageDescPage, RegisterModify, weld::Toggleable&, rBox, void)
{
bool bEnable = false;
if (rBox.get_active())
{
bEnable = true;
if (m_xRegisterLB->get_active() == -1)
m_xRegisterLB->set_active_text(sStandardRegister);
}
m_xRegisterFT->set_sensitive(bEnable);
m_xRegisterLB->set_sensitive(bEnable);
}
void SvxPageDescPage::DisableVerticalPageDir()
{
m_xTextFlowBox->remove_id(SvxFrameDirection::Vertical_RL_TB);
m_xTextFlowBox->remove_id(SvxFrameDirection::Vertical_LR_TB);
if (m_xTextFlowBox->get_count() < 2)
{
m_xTextFlowLbl->hide();
m_xTextFlowBox->hide();
m_aBspWin.EnableFrameDirection( false );
}
}
IMPL_LINK_NOARG(SvxPageDescPage, FrameDirectionModify_Impl, weld::ComboBox&, void)
{
m_aBspWin.SetFrameDirection(m_xTextFlowBox->get_active_id());
m_aBspWin.Invalidate();
}
bool SvxPageDescPage::IsPrinterRangeOverflow(
weld::MetricSpinButton& rField, tools::Long nFirstMargin, tools::Long nLastMargin, MarginPosition nPos )
{
bool bRet = false;
bool bCheck = ( ( m_nPos & nPos ) == 0 );
tools::Long nValue = rField.get_value(FieldUnit::NONE);
if ( bCheck &&
( nValue < nFirstMargin || nValue > nLastMargin ) &&
rField.get_value_changed_from_saved() )
{
rField.set_value(nValue < nFirstMargin ? nFirstMargin : nLastMargin, FieldUnit::NONE);
bRet = true;
}
return bRet;
}
/** Check if a value of a margin edit is outside the printer paper margins
and save this information.
*/
void SvxPageDescPage::CheckMarginEdits( bool _bClear )
{
if ( _bClear )
m_nPos = 0;
sal_Int64 nValue = m_xLeftMarginEdit->get_value(FieldUnit::NONE);
if ( nValue < nFirstLeftMargin || nValue > nLastLeftMargin )
m_nPos |= MARGIN_LEFT;
nValue = m_xRightMarginEdit->get_value(FieldUnit::NONE);
if ( nValue < nFirstRightMargin || nValue > nLastRightMargin )
m_nPos |= MARGIN_RIGHT;
nValue = m_xTopMarginEdit->get_value(FieldUnit::NONE);
if ( nValue < nFirstTopMargin || nValue > nLastTopMargin )
m_nPos |= MARGIN_TOP;
nValue = m_xBottomMarginEdit->get_value(FieldUnit::NONE);
if ( nValue < nFirstBottomMargin || nValue > nLastBottomMargin )
m_nPos |= MARGIN_BOTTOM;
}
bool SvxPageDescPage::IsMarginOutOfRange() const
{
bool bRet = ( ( ( !( m_nPos & MARGIN_LEFT ) &&
m_xLeftMarginEdit->get_value_changed_from_saved() ) &&
( m_xLeftMarginEdit->get_value(FieldUnit::NONE) < nFirstLeftMargin ||
m_xLeftMarginEdit->get_value(FieldUnit::NONE) > nLastLeftMargin ) ) ||
( ( !( m_nPos & MARGIN_RIGHT ) &&
m_xRightMarginEdit->get_value_changed_from_saved() ) &&
( m_xRightMarginEdit->get_value(FieldUnit::NONE) < nFirstRightMargin ||
m_xRightMarginEdit->get_value(FieldUnit::NONE) > nLastRightMargin ) ) ||
( ( !( m_nPos & MARGIN_TOP ) &&
m_xTopMarginEdit->get_value_changed_from_saved() ) &&
( m_xTopMarginEdit->get_value(FieldUnit::NONE) < nFirstTopMargin ||
m_xTopMarginEdit->get_value(FieldUnit::NONE) > nLastTopMargin ) ) ||
( ( !( m_nPos & MARGIN_BOTTOM ) &&
m_xBottomMarginEdit->get_value_changed_from_saved() ) &&
( m_xBottomMarginEdit->get_value(FieldUnit::NONE) < nFirstBottomMargin ||
m_xBottomMarginEdit->get_value(FieldUnit::NONE) > nLastBottomMargin ) ) );
return bRet;
}
void SvxPageDescPage::PageCreated(const SfxAllItemSet& aSet)
{
const SfxUInt16Item* pModeItem = aSet.GetItem(SID_ENUM_PAGE_MODE, false);
const SfxUInt16Item* pPaperStartItem = aSet.GetItem(SID_PAPER_START, false);
const SfxUInt16Item* pPaperEndItem = aSet.GetItem(SID_PAPER_END, false);
const SfxStringListItem* pCollectListItem = aSet.GetItem<SfxStringListItem>(SID_COLLECT_LIST, false);
const SfxBoolItem* pSupportDrawingLayerFillStyleItem = aSet.GetItem<SfxBoolItem>(SID_DRAWINGLAYER_FILLSTYLES, false);
const SfxBoolItem* pIsImpressDoc = aSet.GetItem<SfxBoolItem>(SID_IMPRESS_DOC, false);
if (pModeItem)
{
eMode = static_cast<SvxModeType>(pModeItem->GetValue());
}
if(pPaperStartItem && pPaperEndItem)
{
SetPaperFormatRanges(static_cast<Paper>(pPaperStartItem->GetValue()));
}
if(pCollectListItem)
{
SetCollectionList(pCollectListItem->GetList());
}
if(pSupportDrawingLayerFillStyleItem)
{
const bool bNew(pSupportDrawingLayerFillStyleItem->GetValue());
mbEnableDrawingLayerFillStyles = bNew;
}
if (pIsImpressDoc)
m_xNumberFormatText->set_label(SvxResId(STR_SLIDE_NUMBERS));
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'Swap' is required to be utilized.
↑ V530 The return value of function 'Swap' is required to be utilized.
↑ V530 The return value of function 'Swap' is required to be utilized.
↑ V530 The return value of function 'Swap' is required to be utilized.
↑ V547 Expression 'bGutterAtTop' is always false.
↑ V1048 The 'bModified' variable was assigned the same value.