/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4; fill-column: 100 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <o3tl/safeint.hxx>
#include <sal/log.hxx>
#include <osl/diagnose.h>
#include <rtl/ustrbuf.hxx>
#include <unotools/localedatawrapper.hxx>
#include <officecfg/Office/Common.hxx>
#include <officecfg/VCL.hxx>
#include <utility>
#include <vcl/QueueInfo.hxx>
#include <vcl/commandevent.hxx>
#include <vcl/decoview.hxx>
#include <vcl/help.hxx>
#include <vcl/naturalsort.hxx>
#include <vcl/print.hxx>
#include <vcl/printer/Options.hxx>
#include <vcl/settings.hxx>
#include <vcl/svapp.hxx>
#include <vcl/virdev.hxx>
#include <vcl/wall.hxx>
#include <vcl/weld/weldutils.hxx>
#include <vcl/windowstate.hxx>
#include <bitmaps.hlst>
#include <printdlg.hxx>
#include <strings.hrc>
#include <svdata.hxx>
#include <com/sun/star/beans/PropertyValue.hpp>
using namespace vcl;
using namespace com::sun::star;
using namespace com::sun::star::uno;
using namespace com::sun::star::container;
using namespace com::sun::star::beans;
enum
{
ORIENTATION_AUTOMATIC,
ORIENTATION_PORTRAIT,
ORIENTATION_LANDSCAPE
};
namespace {
bool lcl_ListBoxCompare( const OUString& rStr1, const OUString& rStr2 )
{
return vcl::NaturalSortCompare( rStr1, rStr2 ) < 0;
}
}
PrintDialog::PrintPreviewWindow::PrintPreviewWindow(PrintDialog* pDialog)
: mpDialog(pDialog)
, maOrigSize( 10, 10 )
, mnDPIX(Application::GetDefaultDevice()->GetDPIX())
, mnDPIY(Application::GetDefaultDevice()->GetDPIY())
, mbGreyscale( false )
{
}
PrintDialog::PrintPreviewWindow::~PrintPreviewWindow()
{
}
void PrintDialog::PrintPreviewWindow::Resize()
{
Size aNewSize(GetOutputSizePixel());
tools::Long nTextHeight = GetDrawingArea()->get_text_height();
// leave small space for decoration
aNewSize.AdjustWidth( -(nTextHeight + 2) );
aNewSize.AdjustHeight( -(nTextHeight + 2) );
Size aScaledSize;
double fScale = 1.0;
// #i106435# catch corner case of Size(0,0)
Size aOrigSize( maOrigSize );
if( aOrigSize.Width() < 1 )
aOrigSize.setWidth( aNewSize.Width() );
if( aOrigSize.Height() < 1 )
aOrigSize.setHeight( aNewSize.Height() );
if( aOrigSize.Width() > aOrigSize.Height() )
{
aScaledSize = Size( aNewSize.Width(), aNewSize.Width() * aOrigSize.Height() / aOrigSize.Width() );
if( aScaledSize.Height() > aNewSize.Height() )
fScale = double(aNewSize.Height())/double(aScaledSize.Height());
}
else
{
aScaledSize = Size( aNewSize.Height() * aOrigSize.Width() / aOrigSize.Height(), aNewSize.Height() );
if( aScaledSize.Width() > aNewSize.Width() )
fScale = double(aNewSize.Width())/double(aScaledSize.Width());
}
aScaledSize.setWidth( tools::Long(aScaledSize.Width()*fScale) );
aScaledSize.setHeight( tools::Long(aScaledSize.Height()*fScale) );
maPreviewSize = aScaledSize;
// check and evtl. recreate preview bitmap
preparePreviewBitmap();
}
void PrintDialog::PrintPreviewWindow::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle&)
{
auto popIt = rRenderContext.ScopedPush();
weld::SetPointFont(rRenderContext, rRenderContext.GetSettings().GetStyleSettings().GetLabelFont());
rRenderContext.SetTextColor(rRenderContext.GetSettings().GetStyleSettings().GetLabelTextColor());
rRenderContext.SetBackground(Wallpaper(Application::GetSettings().GetStyleSettings().GetDialogColor()));
rRenderContext.Erase();
auto nTextHeight = rRenderContext.GetTextHeight();
Size aSize(GetOutputSizePixel());
Point aOffset((aSize.Width() - maPreviewSize.Width() + nTextHeight) / 2,
(aSize.Height() - maPreviewSize.Height() + nTextHeight) / 2);
// horizontal line
{
auto nWidth = rRenderContext.GetTextWidth(maHorzText);
auto nStart = aOffset.X() + (maPreviewSize.Width() - nWidth) / 2;
rRenderContext.DrawText(Point(nStart, aOffset.Y() - nTextHeight), maHorzText, 0, maHorzText.getLength());
DecorationView aDecoView(&rRenderContext);
auto nTop = aOffset.Y() - (nTextHeight / 2);
aDecoView.DrawSeparator(Point(aOffset.X(), nTop), Point(nStart - 2, nTop), false);
aDecoView.DrawSeparator(Point(nStart + nWidth + 2, nTop), Point(aOffset.X() + maPreviewSize.Width(), nTop), false);
}
// vertical line
{
auto popIt2 = rRenderContext.ScopedPush(PushFlags::FONT);
vcl::Font aFont(rRenderContext.GetFont());
aFont.SetOrientation(900_deg10);
rRenderContext.SetFont(aFont);
auto nLeft = aOffset.X() - nTextHeight;
auto nWidth = rRenderContext.GetTextWidth(maVertText);
auto nStart = aOffset.Y() + (maPreviewSize.Height() + nWidth) / 2;
rRenderContext.DrawText(Point(nLeft, nStart), maVertText, 0, maVertText.getLength());
DecorationView aDecoView(&rRenderContext);
nLeft = aOffset.X() - (nTextHeight / 2);
aDecoView.DrawSeparator(Point(nLeft, aOffset.Y()), Point(nLeft, nStart - nWidth - 2), true);
aDecoView.DrawSeparator(Point(nLeft, nStart + 2), Point(nLeft, aOffset.Y() + maPreviewSize.Height()), true);
}
if (!maReplacementString.isEmpty())
{
// replacement is active
tools::Rectangle aTextRect(aOffset + Point(2, 2), Size(maPreviewSize.Width() - 4, maPreviewSize.Height() - 4));
rRenderContext.DrawText(aTextRect, maReplacementString,
DrawTextFlags::Center | DrawTextFlags::VCenter |
DrawTextFlags::WordBreak | DrawTextFlags::MultiLine);
}
else
{
Bitmap aPreviewBitmap(maPreviewBitmap);
// This explicit force-to-scale allows us to get the
// mentioned best quality here. Unfortunately this is
// currently not sure when using just ::DrawBitmap with
// a defined size or ::DrawOutDev
aPreviewBitmap.Scale(maPreviewSize, BmpScaleFlag::BestQuality);
rRenderContext.DrawBitmap(aOffset, aPreviewBitmap);
}
tools::Rectangle aFrameRect(aOffset + Point(-1, -1), Size(maPreviewSize.Width() + 2, maPreviewSize.Height() + 2));
DecorationView aDecorationView(&rRenderContext);
aDecorationView.DrawFrame(aFrameRect, DrawFrameStyle::Group);
}
bool PrintDialog::PrintPreviewWindow::Command( const CommandEvent& rEvt )
{
if( rEvt.GetCommand() == CommandEventId::Wheel )
{
const CommandWheelData* pWheelData = rEvt.GetWheelData();
if(pWheelData->GetDelta() > 0)
mpDialog->previewBackward();
else if (pWheelData->GetDelta() < 0)
mpDialog->previewForward();
return true;
}
return CustomWidgetController::Command(rEvt);
}
void PrintDialog::PrintPreviewWindow::setPreview( const GDIMetaFile& i_rNewPreview,
const Size& i_rOrigSize,
std::u16string_view i_rPaperName,
const OUString& i_rReplacement,
sal_Int32 i_nDPIX,
sal_Int32 i_nDPIY,
bool i_bGreyscale
)
{
maMtf = i_rNewPreview;
mnDPIX = i_nDPIX;
mnDPIY = i_nDPIY;
maOrigSize = i_rOrigSize;
maReplacementString = i_rReplacement;
mbGreyscale = i_bGreyscale;
// use correct measurements
const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper());
o3tl::Length eUnit = o3tl::Length::mm;
int nDigits = 0;
if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US )
{
eUnit = o3tl::Length::in100;
nDigits = 2;
}
Size aLogicPaperSize(o3tl::convert(i_rOrigSize, o3tl::Length::mm100, eUnit));
OUString aNumText( rLocWrap.getNum( aLogicPaperSize.Width(), nDigits ) );
OUStringBuffer aBuf( aNumText + " " );
aBuf.appendAscii( eUnit == o3tl::Length::mm ? "mm" : "in" );
if( !i_rPaperName.empty() )
{
aBuf.append( OUString::Concat(" (") + i_rPaperName + ")" );
}
maHorzText = aBuf.makeStringAndClear();
aNumText = rLocWrap.getNum( aLogicPaperSize.Height(), nDigits );
aBuf.append( aNumText + " " );
aBuf.appendAscii( eUnit == o3tl::Length::mm ? "mm" : "in" );
maVertText = aBuf.makeStringAndClear();
// We have a new Metafile and evtl. a new page, so we need to reset
// the PreviewBitmap to force new creation
maPreviewBitmap = Bitmap();
// sets/calculates e.g. maPreviewSize
// also triggers preparePreviewBitmap()
Resize();
Invalidate();
}
void PrintDialog::PrintPreviewWindow::preparePreviewBitmap()
{
if(maPreviewSize.IsEmpty())
{
// not yet fully initialized, no need to prepare anything
return;
}
// define an allowed number of pixels, also see
// defaults for primitive renderers and similar. This
// might be centralized and made dependent of 32/64bit
const sal_uInt32 nMaxSquarePixels(500000);
// check how big (squarePixels) the preview is currently (with
// max value of MaxSquarePixels)
const sal_uInt32 nCurrentSquarePixels(
std::min(
nMaxSquarePixels,
static_cast<sal_uInt32>(maPreviewBitmap.GetSizePixel().getWidth())
* static_cast<sal_uInt32>(maPreviewBitmap.GetSizePixel().getHeight())));
// check how big (squarePixels) the preview needs to be (with
// max value of MaxSquarePixels)
const sal_uInt32 nRequiredSquarePixels(
std::min(
nMaxSquarePixels,
static_cast<sal_uInt32>(maPreviewSize.getWidth())
* static_cast<sal_uInt32>(maPreviewSize.getHeight())));
// check if preview is big enough. Use a scaling value in
// the comparison to not get bigger at the last possible moment
// what may look awkward and pixelated (again). This means
// to use a percentage value - if we have at least
// that value of required pixels, we are good.
static const double fPreventAwkwardFactor(1.35); // 35%
if(nCurrentSquarePixels >= static_cast<sal_uInt32>(nRequiredSquarePixels * fPreventAwkwardFactor))
{
// at this place we also could add a mechanism to let the preview
// bitmap 'shrink' again if it is currently 'too big' -> bigger
// than required. I think this is not necessary for now.
// already sufficient, done.
return;
}
// check if we have enough square pixels e.g for 8x8 pixels
if(nRequiredSquarePixels < 64)
{
// too small preview - let it empty
return;
}
// Calculate nPlannedSquarePixels which is the required size
// expanded by a percentage (with max value of MaxSquarePixels)
static const double fExtraSpaceFactor(1.65); // 65%
const sal_uInt32 nPlannedSquarePixels(
std::min(
nMaxSquarePixels,
static_cast<sal_uInt32>(maPreviewSize.getWidth() * fExtraSpaceFactor)
* static_cast<sal_uInt32>(maPreviewSize.getHeight() * fExtraSpaceFactor)));
// calculate back new width and height - it might have been
// truncated by MaxSquarePixels.
// We know that w*h == nPlannedSquarePixels and w/h == ratio
const double fRatio(static_cast<double>(maPreviewSize.getWidth()) / static_cast<double>(maPreviewSize.getHeight()));
const double fNewWidth(sqrt(static_cast<double>(nPlannedSquarePixels) * fRatio));
const double fNewHeight(sqrt(static_cast<double>(nPlannedSquarePixels) / fRatio));
const Size aScaledSize(basegfx::fround<tools::Long>(fNewWidth), basegfx::fround<tools::Long>(fNewHeight));
// check if this eventual maximum is already reached
// due to having hit the MaxSquarePixels. Due to using
// an integer AspectRatio, we cannot make a numeric exact
// comparison - we need to compare if we are close
const double fScaledSizeSquare(static_cast<double>(aScaledSize.getWidth() * aScaledSize.getHeight()));
const double fPreviewSizeSquare(static_cast<double>(maPreviewBitmap.GetSizePixel().getWidth() * maPreviewBitmap.GetSizePixel().getHeight()));
// test as equal up to 0.1% (0.001)
if(fPreviewSizeSquare != 0.0 && fabs((fScaledSizeSquare / fPreviewSizeSquare) - 1.0) < 0.001)
{
// maximum is reached, avoid bigger scaling
return;
}
// create temporary VDev with requested Size and DPI.
// CAUTION: DPI *is* important here - it DIFFERS from 75x75, usually 600x600 is used
ScopedVclPtrInstance<VirtualDevice> pPrerenderVDev(*Application::GetDefaultDevice());
pPrerenderVDev->SetOutputSizePixel(aScaledSize, false);
pPrerenderVDev->SetReferenceDevice( mnDPIX, mnDPIY );
// calculate needed Scale for Metafile (using Size and DPI from VDev)
Size aLogicSize( pPrerenderVDev->PixelToLogic( pPrerenderVDev->GetOutputSizePixel(), MapMode( MapUnit::Map100thMM ) ) );
Size aOrigSize( maOrigSize );
if( aOrigSize.Width() < 1 )
aOrigSize.setWidth( aLogicSize.Width() );
if( aOrigSize.Height() < 1 )
aOrigSize.setHeight( aLogicSize.Height() );
double fScale = double(aLogicSize.Width())/double(aOrigSize.Width());
// tdf#141761
// The display quality of the Preview is pretty ugly when
// FormControls are used. I made a deep-dive why this happens,
// and in principle the reason is the Mteafile::Scale used
// below. Since Metafile actions are integer, that floating point
// scale leads to rounding errors that make the lines painting
// the FormControls disappear in the surrounding ClipRegions.
// That Scale cannot be avoided since the Metafile contains it's
// own SetMapMode commands which *will* be executed on ::Play,
// so the ::Scale is the only possibility fr Metafile currently:
// Giving a Size as parameter in ::Play will *not* work due to
// the relativeMapMode that gets created will fail on
// ::SetMapMode actions in the Metafile - and FormControls DO
// use ::SetMapMode(MapPixel).
// This can only be solved better in the future using Primitives
// which would allow any scale by embedding to a Transformation,
// but that would be a bigger rework.
// Until then, use this little 'trick' to improve quality.
// It uses the fact to empirically having tested that the quality
// gets really bad for FormControls starting by a scale factor
// smaller than 0.2 - that makes the ClipRegion overlap start.
// So - for now - try not to go below that.
static const double fMinimumScale(0.2);
double fFactor(0.0);
if(fScale < fMinimumScale)
{
fFactor = fMinimumScale / fScale;
fScale = fMinimumScale;
double fWidth(aScaledSize.getWidth() * fFactor);
double fHeight(aScaledSize.getHeight() * fFactor);
const double fNewNeededPixels(fWidth * fHeight);
// to not risk using too big bitmaps and running into
// memory problems, still limit to a useful factor is
// necessary, also empirically estimated to
// avoid the quality from collapsing (using a direct
// in-between , ceil'd result)
static const double fMaximumQualitySquare(1396221.0);
if(fNewNeededPixels > fMaximumQualitySquare)
{
const double fCorrection(fMaximumQualitySquare/fNewNeededPixels);
fWidth *= fCorrection;
fHeight *= fCorrection;
fScale *= fCorrection;
}
const Size aScaledSize2(basegfx::fround<tools::Long>(fWidth), basegfx::fround<tools::Long>(fHeight));
pPrerenderVDev->SetOutputSizePixel(aScaledSize2, false);
aLogicSize = pPrerenderVDev->PixelToLogic( aScaledSize2, MapMode( MapUnit::Map100thMM ) );
}
pPrerenderVDev->EnableOutput();
pPrerenderVDev->SetBackground( Wallpaper(COL_WHITE) );
pPrerenderVDev->Erase();
pPrerenderVDev->SetMapMode(MapMode(MapUnit::Map100thMM));
if( mbGreyscale )
pPrerenderVDev->SetDrawMode( pPrerenderVDev->GetDrawMode() |
( DrawModeFlags::GrayLine | DrawModeFlags::GrayFill | DrawModeFlags::GrayText |
DrawModeFlags::GrayBitmap | DrawModeFlags::GrayGradient ) );
// Copy, Scale and Paint Metafile
GDIMetaFile aMtf( maMtf );
aMtf.WindStart();
aMtf.Scale( fScale, fScale );
aMtf.WindStart();
aMtf.Play(*pPrerenderVDev, Point(0, 0), aLogicSize);
pPrerenderVDev->SetMapMode(MapMode(MapUnit::MapPixel));
maPreviewBitmap = pPrerenderVDev->GetBitmap(Point(0, 0), pPrerenderVDev->GetOutputSizePixel());
if(0.0 != fFactor)
{
// Correct to needed size, BmpScaleFlag::Interpolate is acceptable,
// but BmpScaleFlag::BestQuality is just better. In case of time
// constraints, change to Interpolate would be possible
maPreviewBitmap.Scale(aScaledSize, BmpScaleFlag::BestQuality);
}
}
PrintDialog::ShowNupOrderWindow::ShowNupOrderWindow()
: mnOrderMode( NupOrderType::LRTB )
, mnRows( 1 )
, mnColumns( 1 )
{
}
void PrintDialog::ShowNupOrderWindow::SetDrawingArea(weld::DrawingArea* pDrawingArea)
{
Size aSize(70, 70);
pDrawingArea->set_size_request(aSize.Width(), aSize.Height());
CustomWidgetController::SetDrawingArea(pDrawingArea);
SetOutputSizePixel(aSize);
}
void PrintDialog::ShowNupOrderWindow::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle& /*i_rRect*/)
{
rRenderContext.SetMapMode(MapMode(MapUnit::MapPixel));
rRenderContext.SetTextColor(rRenderContext.GetSettings().GetStyleSettings().GetFieldTextColor());
rRenderContext.SetBackground(Wallpaper(Application::GetSettings().GetStyleSettings().GetFieldColor()));
rRenderContext.Erase();
int nPages = mnRows * mnColumns;
Font aFont(rRenderContext.GetSettings().GetStyleSettings().GetFieldFont());
aFont.SetFontSize(Size(0, 24));
rRenderContext.SetFont(aFont);
Size aSampleTextSize(rRenderContext.GetTextWidth(OUString::number(nPages + 1)), rRenderContext.GetTextHeight());
Size aOutSize(GetOutputSizePixel());
Size aSubSize(aOutSize.Width() / mnColumns, aOutSize.Height() / mnRows);
// calculate font size: shrink the sample text so it fits
double fX = double(aSubSize.Width()) / double(aSampleTextSize.Width());
double fY = double(aSubSize.Height()) / double(aSampleTextSize.Height());
double fScale = (fX < fY) ? fX : fY;
tools::Long nFontHeight = tools::Long(24.0 * fScale) - 3;
if (nFontHeight < 5)
nFontHeight = 5;
aFont.SetFontSize(Size( 0, nFontHeight));
rRenderContext.SetFont(aFont);
tools::Long nTextHeight = rRenderContext.GetTextHeight();
for (int i = 0; i < nPages; i++)
{
OUString aPageText(OUString::number(i + 1));
int nX = 0, nY = 0;
switch (mnOrderMode)
{
case NupOrderType::LRTB:
nX = (i % mnColumns);
nY = (i / mnColumns);
break;
case NupOrderType::TBLR:
nX = (i / mnRows);
nY = (i % mnRows);
break;
case NupOrderType::RLTB:
nX = mnColumns - 1 - (i % mnColumns);
nY = (i / mnColumns);
break;
case NupOrderType::TBRL:
nX = mnColumns - 1 - (i / mnRows);
nY = (i % mnRows);
break;
}
Size aTextSize(rRenderContext.GetTextWidth(aPageText), nTextHeight);
int nDeltaX = (aSubSize.Width() - aTextSize.Width()) / 2;
int nDeltaY = (aSubSize.Height() - aTextSize.Height()) / 2;
rRenderContext.DrawText(Point(nX * aSubSize.Width() + nDeltaX,
nY * aSubSize.Height() + nDeltaY), aPageText);
}
DecorationView aDecorationView(&rRenderContext);
aDecorationView.DrawFrame(tools::Rectangle(Point(0, 0), aOutSize), DrawFrameStyle::Group);
}
Size const & PrintDialog::getJobPageSize()
{
if( maFirstPageSize.IsEmpty() )
{
maFirstPageSize = maNupPortraitSize;
GDIMetaFile aMtf;
if( maPController->getPageCountProtected() > 0 )
{
PrinterController::PageSize aPageSize = maPController->getPageFile( 0, aMtf, true );
maFirstPageSize = aPageSize.aSize;
}
}
return maFirstPageSize;
}
PrintDialog::PrintDialog(weld::Window* i_pWindow, std::shared_ptr<PrinterController> i_xController)
: GenericDialogController(i_pWindow, u"vcl/ui/printdialog.ui"_ustr, u"PrintDialog"_ustr)
, maPController(std::move( i_xController ))
, mxTabCtrl(m_xBuilder->weld_notebook(u"tabcontrol"_ustr))
, mxScrolledWindow(m_xBuilder->weld_scrolled_window(u"scrolledwindow"_ustr))
, mxPageLayoutFrame(m_xBuilder->weld_frame(u"layoutframe"_ustr))
, mxPrinters(m_xBuilder->weld_combo_box(u"printersbox"_ustr))
, mxStatusTxt(m_xBuilder->weld_label(u"status"_ustr))
, mxSetupButton(m_xBuilder->weld_button(u"setup"_ustr))
, mxCopyCountField(m_xBuilder->weld_spin_button(u"copycount"_ustr))
, mxCollateBox(m_xBuilder->weld_check_button(u"collate"_ustr))
, mxCollateImage(m_xBuilder->weld_image(u"collateimage"_ustr))
, mxPageRangeEdit(m_xBuilder->weld_entry(u"pagerange"_ustr))
, mxPageRangesRadioButton(m_xBuilder->weld_radio_button(u"rbRangePages"_ustr))
, mxPaperSidesBox(m_xBuilder->weld_combo_box(u"sidesbox"_ustr))
, mxSingleJobsBox(m_xBuilder->weld_check_button(u"singlejobs"_ustr))
, mxReverseOrderBox(m_xBuilder->weld_check_button(u"reverseorder"_ustr))
, mxOKButton(m_xBuilder->weld_button(u"ok"_ustr))
, mxCancelButton(m_xBuilder->weld_button(u"cancel"_ustr))
, mxBackwardBtn(m_xBuilder->weld_button(u"backward"_ustr))
, mxForwardBtn(m_xBuilder->weld_button(u"forward"_ustr))
, mxFirstBtn(m_xBuilder->weld_button(u"btnFirst"_ustr))
, mxLastBtn(m_xBuilder->weld_button(u"btnLast"_ustr))
, mxPreviewBox(m_xBuilder->weld_check_button(u"previewbox"_ustr))
, mxNumPagesText(m_xBuilder->weld_label(u"totalnumpages"_ustr))
, mxPreview(new PrintPreviewWindow(this))
, mxPreviewWindow(new weld::CustomWeld(*m_xBuilder, u"preview"_ustr, *mxPreview))
, mxPageEdit(m_xBuilder->weld_entry(u"pageedit"_ustr))
, mxPagesBtn(m_xBuilder->weld_radio_button(u"pagespersheetbtn"_ustr))
, mxBrochureBtn(m_xBuilder->weld_radio_button(u"brochure"_ustr))
, mxPagesBoxTitleTxt(m_xBuilder->weld_label(u"pagespersheettxt"_ustr))
, mxNupPagesBox(m_xBuilder->weld_combo_box(u"pagespersheetbox"_ustr))
, mxNupNumPagesTxt(m_xBuilder->weld_label(u"pagestxt"_ustr))
, mxNupColEdt(m_xBuilder->weld_spin_button(u"pagecols"_ustr))
, mxNupTimesTxt(m_xBuilder->weld_label(u"by"_ustr))
, mxNupRowsEdt(m_xBuilder->weld_spin_button(u"pagerows"_ustr))
, mxPageMarginTxt1(m_xBuilder->weld_label(u"pagemargintxt1"_ustr))
, mxPageMarginEdt(m_xBuilder->weld_metric_spin_button(u"pagemarginsb"_ustr, FieldUnit::MM))
, mxPageMarginTxt2(m_xBuilder->weld_label(u"pagemargintxt2"_ustr))
, mxSheetMarginTxt1(m_xBuilder->weld_label(u"sheetmargintxt1"_ustr))
, mxSheetMarginEdt(m_xBuilder->weld_metric_spin_button(u"sheetmarginsb"_ustr, FieldUnit::MM))
, mxSheetMarginTxt2(m_xBuilder->weld_label(u"sheetmargintxt2"_ustr))
, mxPaperSizeBox(m_xBuilder->weld_combo_box(u"papersizebox"_ustr))
, mxOrientationBox(m_xBuilder->weld_combo_box(u"pageorientationbox"_ustr))
, mxNupOrderTxt(m_xBuilder->weld_label(u"labelorder"_ustr))
, mxNupOrderBox(m_xBuilder->weld_combo_box(u"orderbox"_ustr))
, mxNupOrder(new ShowNupOrderWindow)
, mxNupOrderWin(new weld::CustomWeld(*m_xBuilder, u"orderpreview"_ustr, *mxNupOrder))
, mxBorderCB(m_xBuilder->weld_check_button(u"bordercb"_ustr))
, mxRangeExpander(m_xBuilder->weld_expander(u"exRangeExpander"_ustr))
, mxLayoutExpander(m_xBuilder->weld_expander(u"exLayoutExpander"_ustr))
, mxCustom(m_xBuilder->weld_widget(u"customcontents"_ustr))
, maPrintToFileText( VclResId( SV_PRINT_TOFILE_TXT ) )
, maDefPrtText( VclResId( SV_PRINT_DEFPRT_TXT ) )
, maNoPageStr( VclResId( SV_PRINT_NOPAGES ) )
, maNoPreviewStr( VclResId( SV_PRINT_NOPREVIEW ) )
, mnCurPage( 0 )
, mnCachedPages( 0 )
, mbShowLayoutFrame( true )
, maUpdatePreviewIdle("Print Dialog Update Preview Idle")
, maUpdatePreviewNoCacheIdle("Print Dialog Update Preview (no cache) Idle")
{
// save printbutton text, gets exchanged occasionally with print to file
maPrintText = mxOKButton->get_label();
maPageStr = mxNumPagesText->get_label();
mxPrinters->append_text(maPrintToFileText);
// fill printer listbox
std::vector< OUString > rQueues( Printer::GetPrinterQueues() );
std::sort( rQueues.begin(), rQueues.end(), lcl_ListBoxCompare );
for( const auto& rQueue : rQueues )
{
mxPrinters->append_text(rQueue);
}
// select current printer
if (mxPrinters->find_text(maPController->getPrinter()->GetName()) != -1)
mxPrinters->set_active_text(maPController->getPrinter()->GetName());
else
{
// fall back to last printer
OUString aValue( officecfg::VCL::VCLSettings::PrintDialog::LastPrinter::get() );
if (mxPrinters->find_text(aValue) != -1)
{
mxPrinters->set_active_text(aValue);
maPController->setPrinter( VclPtrInstance<Printer>( aValue ) );
}
else
{
// fall back to default printer
mxPrinters->set_active_text(Printer::GetDefaultPrinterName());
maPController->setPrinter( VclPtrInstance<Printer>( Printer::GetDefaultPrinterName() ) );
}
}
// not printing to file
maPController->resetPrinterOptions( false );
// update the text fields for the printer
updatePrinterText();
// setup dependencies
checkControlDependencies();
// setup paper sides box
setupPaperSidesBox();
// set initial focus to "Printer"
mxPrinters->grab_focus();
// setup sizes for N-Up
Size aNupSize( maPController->getPrinter()->PixelToLogic(
maPController->getPrinter()->GetPaperSizePixel(), MapMode( MapUnit::Map100thMM ) ) );
if( maPController->getPrinter()->GetOrientation() == Orientation::Landscape )
{
maNupLandscapeSize = aNupSize;
// coverity[swapped_arguments : FALSE] - this is in the correct order
maNupPortraitSize = Size( aNupSize.Height(), aNupSize.Width() );
}
else
{
maNupPortraitSize = aNupSize;
// coverity[swapped_arguments : FALSE] - this is in the correct order
maNupLandscapeSize = Size( aNupSize.Height(), aNupSize.Width() );
}
maUpdatePreviewIdle.SetPriority(TaskPriority::POST_PAINT);
maUpdatePreviewIdle.SetInvokeHandler(LINK( this, PrintDialog, updatePreviewIdle));
maUpdatePreviewNoCacheIdle.SetPriority(TaskPriority::POST_PAINT);
maUpdatePreviewNoCacheIdle.SetInvokeHandler(LINK(this, PrintDialog, updatePreviewNoCacheIdle));
initFromMultiPageSetup( maPController->getMultipage() );
// setup optional UI options set by application
setupOptionalUI();
// hide layout frame if unwanted
mxPageLayoutFrame->set_visible(mbShowLayoutFrame);
// restore settings from last run
readFromSettings();
// setup click hdl
mxOKButton->connect_clicked(LINK(this, PrintDialog, ClickHdl));
mxCancelButton->connect_clicked(LINK(this, PrintDialog, ClickHdl));
mxSetupButton->connect_clicked( LINK( this, PrintDialog, ClickHdl ) );
mxBackwardBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl));
mxForwardBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl));
mxFirstBtn->connect_clicked(LINK(this, PrintDialog, ClickHdl));
mxLastBtn->connect_clicked( LINK( this, PrintDialog, ClickHdl ) );
// setup toggle hdl
mxReverseOrderBox->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) );
mxCollateBox->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) );
mxSingleJobsBox->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) );
mxBrochureBtn->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) );
mxPreviewBox->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) );
mxBorderCB->connect_toggled( LINK( this, PrintDialog, ToggleHdl ) );
// setup select hdl
mxPrinters->connect_changed(LINK(this, PrintDialog, SelectPrinterHdl));
mxPaperSidesBox->connect_changed(LINK(this, PrintDialog, SelectPaperSidesHdl));
mxNupPagesBox->connect_changed(LINK(this, PrintDialog, SelectNupPagesHdl));
mxOrientationBox->connect_changed(LINK(this, PrintDialog, SelectOrientationHdl));
mxNupOrderBox->connect_changed(LINK(this, PrintDialog, SelectNupOrderHdl));
mxPaperSizeBox->connect_changed(LINK(this, PrintDialog, SelectPaperSizeHdl));
// setup modify hdl
mxPageEdit->connect_activate( LINK( this, PrintDialog, ActivateHdl ) );
mxPageEdit->connect_focus_out( LINK( this, PrintDialog, FocusOutHdl ) );
mxCopyCountField->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) );
mxNupColEdt->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) );
mxNupRowsEdt->connect_value_changed( LINK( this, PrintDialog, SpinModifyHdl ) );
mxPageMarginEdt->connect_value_changed( LINK( this, PrintDialog, MetricSpinModifyHdl ) );
mxSheetMarginEdt->connect_value_changed( LINK( this, PrintDialog, MetricSpinModifyHdl ) );
updateNupFromPages();
// tdf#129180 Delay setting the default value in the Paper Size list
// set paper sizes listbox
setPaperSizes();
mxRangeExpander->set_expanded(
officecfg::Office::Common::Print::Dialog::RangeSectionExpanded::get());
mxLayoutExpander->set_expanded(
officecfg::Office::Common::Print::Dialog::LayoutSectionExpanded::get());
// lock the dialog height, regardless of later expander state
mxScrolledWindow->set_size_request(
mxScrolledWindow->get_preferred_size().Width() + mxScrolledWindow->get_scroll_thickness(),
450);
m_xDialog->set_centered_on_parent(true);
}
void PrintDialog::ImplDestroy()
{
std::shared_ptr<comphelper::ConfigurationChanges> batch(comphelper::ConfigurationChanges::create());
officecfg::Office::Common::Print::Dialog::RangeSectionExpanded::set(mxRangeExpander->get_expanded(), batch);
officecfg::Office::Common::Print::Dialog::LayoutSectionExpanded::set(mxLayoutExpander->get_expanded(), batch);
batch->commit();
}
PrintDialog::~PrintDialog()
{
suppress_fun_call_w_exception(ImplDestroy());
}
void PrintDialog::setupPaperSidesBox()
{
DuplexMode eDuplex = maPController->getPrinter()->GetDuplexMode();
if ( eDuplex == DuplexMode::Unknown || isPrintToFile() )
{
mxPaperSidesBox->set_active( 0 );
mxPaperSidesBox->set_sensitive( false );
}
else
{
mxPaperSidesBox->set_active( static_cast<sal_Int32>(eDuplex) - 1 );
mxPaperSidesBox->set_sensitive( true );
}
}
void PrintDialog::storeToSettings()
{
std::shared_ptr<comphelper::ConfigurationChanges> batch(comphelper::ConfigurationChanges::create());
officecfg::VCL::VCLSettings::PrintDialog::LastPrinter::set(
isPrintToFile() ? Printer::GetDefaultPrinterName()
: mxPrinters->get_active_text(), batch );
officecfg::VCL::VCLSettings::PrintDialog::LastPage::set(
mxTabCtrl->get_tab_label_text(mxTabCtrl->get_current_page_ident()), batch);
officecfg::VCL::VCLSettings::PrintDialog::WindowState::set(
m_xDialog->get_window_state(vcl::WindowDataMask::All), batch );
officecfg::VCL::VCLSettings::PrintDialog::Collate::set( mxCollateBox->get_active(), batch );
officecfg::VCL::VCLSettings::PrintDialog::CollateSingleJobs::set(
mxSingleJobsBox->get_active(), batch );
officecfg::VCL::VCLSettings::PrintDialog::HasPreview::set( hasPreview(), batch);
batch->commit();
}
void PrintDialog::readFromSettings()
{
// read last selected tab page; if it exists, activate it
OUString aValue = officecfg::VCL::VCLSettings::PrintDialog::LastPage::get();
sal_uInt16 nCount = mxTabCtrl->get_n_pages();
for (sal_uInt16 i = 0; i < nCount; ++i)
{
OUString sPageId = mxTabCtrl->get_page_ident(i);
if (aValue == mxTabCtrl->get_tab_label_text(sPageId))
{
mxTabCtrl->set_current_page(sPageId);
break;
}
}
// persistent window state
aValue = officecfg::VCL::VCLSettings::PrintDialog::WindowState::get();
if (!aValue.isEmpty())
m_xDialog->set_window_state(aValue);
// collate
mxCollateBox->set_sensitive( officecfg::VCL::VCLSettings::PrintDialog::Collate::isReadOnly() );
mxCollateBox->set_active( officecfg::VCL::VCLSettings::PrintDialog::Collate::get() );
// collate single jobs
mxSingleJobsBox->set_active( officecfg::VCL::VCLSettings::PrintDialog::CollateSingleJobs::get() );
// preview box
mxPreviewBox->set_active( officecfg::VCL::VCLSettings::PrintDialog::HasPreview::get() );
}
void PrintDialog::setPaperSizes()
{
mxPaperSizeBox->clear();
mxPaperSizeBox->set_active(-1);
VclPtr<Printer> aPrt( maPController->getPrinter() );
mePaper = aPrt->GetPaper();
// Related: tdf#159995 allow setting the page size when printing to file
// On macOS, printing to file just saves to PDF using a native print
// job just like the native print dialog's PDF > Save as PDF... option.
// Also, as noted in tdf#163558, the native print dialog could support
// changing the page size eventually (and already does in Apple's
// Safari and TextEdit applications) so allow changing of the page
// size in the non-native print dialog on macOS as well.
#ifndef MACOSX
if ( isPrintToFile() )
{
mxPaperSizeBox->set_sensitive( false );
}
else
#endif
{
int nExactMatch = -1;
int nSizeMatch = -1;
int nRotatedSizeMatch = -1;
Size aSizeOfPaper = aPrt->GetSizeOfPaper();
PaperInfo aPaperInfo(aSizeOfPaper.getWidth(), aSizeOfPaper.getHeight());
// coverity[swapped_arguments : FALSE] - this is in the correct order
PaperInfo aRotatedPaperInfo(aSizeOfPaper.getHeight(), aSizeOfPaper.getWidth());
const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper());
o3tl::Length eUnit = o3tl::Length::mm;
int nDigits = 0;
if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US )
{
eUnit = o3tl::Length::in100;
nDigits = 2;
}
for (int nPaper = 0; nPaper < aPrt->GetPaperInfoCount(); nPaper++)
{
PaperInfo aInfo = aPrt->GetPaperInfo( nPaper );
aInfo.doSloppyFit(true);
Paper ePaper = aInfo.getPaper();
Size aSize = aPrt->GetPaperSize( nPaper );
Size aLogicPaperSize( o3tl::convert(aSize, o3tl::Length::mm100, eUnit) );
OUString aWidth( rLocWrap.getNum( aLogicPaperSize.Width(), nDigits ) );
OUString aHeight( rLocWrap.getNum( aLogicPaperSize.Height(), nDigits ) );
OUString aUnit = eUnit == o3tl::Length::mm ? u"mm"_ustr : u"in"_ustr;
OUString aPaperName;
// Paper sizes that we don't know of but the system printer driver lists are not "User
// Defined". Displaying them as such is just confusing.
if (ePaper != PAPER_USER)
aPaperName = Printer::GetPaperName( ePaper ) + " ";
aPaperName += aWidth + aUnit + " x " + aHeight + aUnit;
mxPaperSizeBox->append_text(aPaperName);
if (ePaper != PAPER_USER && ePaper == mePaper)
nExactMatch = nPaper;
if (ePaper == PAPER_USER && aInfo.sloppyEqual(aPaperInfo))
nSizeMatch = nPaper;
if (ePaper == PAPER_USER && aInfo.sloppyEqual(aRotatedPaperInfo))
nRotatedSizeMatch = nPaper;
}
if (nExactMatch != -1)
mxPaperSizeBox->set_active(nExactMatch);
else if (nSizeMatch != -1)
mxPaperSizeBox->set_active(nSizeMatch);
else if (nRotatedSizeMatch != -1)
mxPaperSizeBox->set_active(nRotatedSizeMatch);
mxPaperSizeBox->set_sensitive( true );
}
}
void PrintDialog::updatePrinterText()
{
const OUString aDefPrt( Printer::GetDefaultPrinterName() );
const QueueInfo* pInfo = Printer::GetQueueInfo( mxPrinters->get_active_text(), true );
if( pInfo )
{
// FIXME: status text
OUString aStatus;
if( aDefPrt == pInfo->GetPrinterName() )
aStatus = maDefPrtText;
mxStatusTxt->set_label( aStatus );
}
else
{
mxStatusTxt->set_label( OUString() );
}
}
void PrintDialog::setPreviewText()
{
OUString aNewText( maPageStr.replaceFirst( "%n", OUString::number( mnCachedPages ) ) );
mxNumPagesText->set_label( aNewText );
}
IMPL_LINK_NOARG(PrintDialog, updatePreviewIdle, Timer*, void)
{
preparePreview(true);
}
IMPL_LINK_NOARG(PrintDialog, updatePreviewNoCacheIdle, Timer*, void)
{
preparePreview(false);
}
void PrintDialog::preparePreview( bool i_bMayUseCache )
{
VclPtr<Printer> aPrt( maPController->getPrinter() );
Size aCurPageSize = aPrt->PixelToLogic( aPrt->GetPaperSizePixel(), MapMode( MapUnit::Map100thMM ) );
// tdf#123076 Get paper size for the preview top label
mePaper = aPrt->GetPaper();
GDIMetaFile aMtf;
// page range may have changed depending on options
sal_Int32 nPages = maPController->getFilteredPageCount();
mnCachedPages = nPages;
if (!i_bMayUseCache)
updatePageRange(nPages);
setPreviewText();
if ( !hasPreview() )
{
mxPreview->setPreview( aMtf, aCurPageSize,
Printer::GetPaperName( mePaper ),
maNoPreviewStr,
aPrt->GetDPIX(), aPrt->GetDPIY(),
aPrt->GetPrinterOptions().IsConvertToGreyscales()
);
mxForwardBtn->set_sensitive( false );
mxBackwardBtn->set_sensitive( false );
mxFirstBtn->set_sensitive( false );
mxLastBtn->set_sensitive( false );
mxPageEdit->set_sensitive( false );
return;
}
if( mnCurPage >= nPages )
mnCurPage = nPages-1;
if( mnCurPage < 0 )
mnCurPage = 0;
mxPageEdit->set_text(OUString::number(mnCurPage + 1));
if( nPages > 0 )
{
PrinterController::PageSize aPageSize =
maPController->getFilteredPageFile( mnCurPage, aMtf, i_bMayUseCache );
if (mxOrientationBox->get_active() == ORIENTATION_AUTOMATIC)
{
aCurPageSize
= aPrt->PixelToLogic(aPrt->GetPaperSizePixel(), MapMode(MapUnit::Map100thMM));
}
if( ! aPageSize.bFullPaper )
{
const MapMode aMapMode( MapUnit::Map100thMM );
Point aOff( aPrt->PixelToLogic( aPrt->GetPageOffsetPixel(), aMapMode ) );
aMtf.Move( aOff.X(), aOff.Y() );
}
// tdf#150561: page size may have changed so sync mePaper with it
mePaper = aPrt->GetPaper();
}
mxPreview->setPreview( aMtf, aCurPageSize,
Printer::GetPaperName( mePaper ),
nPages > 0 ? OUString() : maNoPageStr,
aPrt->GetDPIX(), aPrt->GetDPIY(),
aPrt->GetPrinterOptions().IsConvertToGreyscales()
);
mxForwardBtn->set_sensitive( mnCurPage < nPages-1 );
mxBackwardBtn->set_sensitive( mnCurPage != 0 );
mxFirstBtn->set_sensitive( mnCurPage != 0 );
mxLastBtn->set_sensitive( mnCurPage < nPages-1 );
mxPageEdit->set_sensitive( nPages > 1 );
}
void PrintDialog::updatePageRange(sal_Int32 nPages)
{
if (nPages > 0 && !mxPageRangesRadioButton->get_active())
{
OUStringBuffer aBuf(32);
aBuf.append("1");
if (nPages > 1)
{
aBuf.append("-" + OUString::number(nPages));
}
OUString sRange = aBuf.makeStringAndClear();
mxPageRangeEdit->set_text(sRange);
maPController->setValue(u"PageRange"_ustr, Any(sRange));
}
}
void PrintDialog::updatePageSize(int nOrientation)
{
VclPtr<Printer> aPrt(maPController->getPrinter());
Size aSize;
if (mxNupPagesBox->get_active_id() == "1")
{
PaperInfo aInfo = aPrt->GetPaperInfo(mxPaperSizeBox->get_active());
aSize = Size(aInfo.getWidth(), aInfo.getHeight());
if (aSize.IsEmpty())
aSize = aPrt->GetSizeOfPaper();
if (nOrientation != ORIENTATION_AUTOMATIC)
{
if ((nOrientation == ORIENTATION_PORTRAIT && aSize.Width() > aSize.Height())
|| (nOrientation == ORIENTATION_LANDSCAPE && aSize.Width() < aSize.Height()))
{
// coverity[swapped_arguments : FALSE] - this is in the intended order
aSize = Size(aSize.Height(), aSize.Width());
}
}
}
else
aSize = getJobPageSize();
aPrt->SetPrintPageSize(aSize);
aPrt->SetUsePrintDialogSetting(true);
}
void PrintDialog::updateOrientationBox( const bool bAutomatic )
{
if ( !bAutomatic )
{
Orientation eOrientation = maPController->getPrinter()->GetOrientation();
mxOrientationBox->set_active( static_cast<sal_Int32>(eOrientation) + 1 );
}
else if ( hasOrientationChanged() )
{
mxOrientationBox->set_active( ORIENTATION_AUTOMATIC );
}
}
bool PrintDialog::hasOrientationChanged() const
{
const int nOrientation = mxOrientationBox->get_active();
const Orientation eOrientation = maPController->getPrinter()->GetOrientation();
return (nOrientation == ORIENTATION_LANDSCAPE && eOrientation == Orientation::Portrait)
|| (nOrientation == ORIENTATION_PORTRAIT && eOrientation == Orientation::Landscape);
}
// Always use this function to set paper orientation to make sure everything behaves well
void PrintDialog::setPaperOrientation( Orientation eOrientation, bool fromUser )
{
VclPtr<Printer> aPrt( maPController->getPrinter() );
aPrt->SetOrientation( eOrientation );
maPController->setOrientationFromUser( eOrientation, fromUser );
}
void PrintDialog::checkControlDependencies()
{
if (mxCopyCountField->get_value() > 1)
{
mxCollateBox->set_sensitive( officecfg::VCL::VCLSettings::PrintDialog::Collate::isReadOnly() );
mxSingleJobsBox->set_sensitive( mxCollateBox->get_active() );
}
else
{
mxCollateBox->set_sensitive( false );
mxSingleJobsBox->set_sensitive( false );
}
OUString aImg(mxCollateBox->get_active() ? SV_PRINT_COLLATE_BMP : SV_PRINT_NOCOLLATE_BMP);
mxCollateImage->set_from_icon_name(aImg);
// enable setup button only for printers that can be setup
bool bHaveSetup = maPController->getPrinter()->HasSupport( PrinterSupport::SetupDialog );
mxSetupButton->set_sensitive(bHaveSetup);
}
void PrintDialog::checkOptionalControlDependencies()
{
for( const auto& rEntry : maControlToPropertyMap )
{
assert(rEntry.first);
bool bShouldbeEnabled = maPController->isUIOptionEnabled( rEntry.second );
if (bShouldbeEnabled && dynamic_cast<weld::RadioButton*>(rEntry.first))
{
auto r_it = maControlToNumValMap.find( rEntry.first );
if( r_it != maControlToNumValMap.end() )
{
bShouldbeEnabled = maPController->isUIChoiceEnabled( rEntry.second, r_it->second );
}
}
bool bIsEnabled = rEntry.first->get_sensitive();
// Enable does not do a change check first, so can be less cheap than expected
if (bShouldbeEnabled != bIsEnabled)
rEntry.first->set_sensitive( bShouldbeEnabled );
}
}
void PrintDialog::initFromMultiPageSetup( const vcl::PrinterController::MultiPageSetup& i_rMPS )
{
mxNupOrderWin->show();
mxPagesBtn->set_active(true);
mxBrochureBtn->hide();
// setup field units for metric fields
const LocaleDataWrapper& rLocWrap(Application::GetSettings().GetLocaleDataWrapper());
FieldUnit eUnit = FieldUnit::MM;
sal_uInt16 nDigits = 0;
if( rLocWrap.getMeasurementSystemEnum() == MeasurementSystem::US )
{
eUnit = FieldUnit::INCH;
nDigits = 2;
}
// set units
mxPageMarginEdt->set_unit( eUnit );
mxSheetMarginEdt->set_unit( eUnit );
// set precision
mxPageMarginEdt->set_digits( nDigits );
mxSheetMarginEdt->set_digits( nDigits );
mxSheetMarginEdt->set_value( mxSheetMarginEdt->normalize( i_rMPS.nLeftMargin ), FieldUnit::MM_100TH );
mxPageMarginEdt->set_value( mxPageMarginEdt->normalize( i_rMPS.nHorizontalSpacing ), FieldUnit::MM_100TH );
mxBorderCB->set_active( i_rMPS.bDrawBorder );
mxNupRowsEdt->set_value( i_rMPS.nRows );
mxNupColEdt->set_value( i_rMPS.nColumns );
mxNupOrderBox->set_active( static_cast<sal_Int32>(i_rMPS.nOrder) );
if( i_rMPS.nRows != 1 || i_rMPS.nColumns != 1 )
{
mxNupPagesBox->set_active( mxNupPagesBox->get_count()-1 );
showAdvancedControls( true );
mxNupOrder->setValues( i_rMPS.nOrder, i_rMPS.nColumns, i_rMPS.nRows );
}
}
void PrintDialog::updateNup( bool i_bMayUseCache )
{
int nRows = mxNupRowsEdt->get_value();
int nCols = mxNupColEdt->get_value();
tools::Long nPageMargin = mxPageMarginEdt->denormalize(mxPageMarginEdt->get_value( FieldUnit::MM_100TH ));
tools::Long nSheetMargin = mxSheetMarginEdt->denormalize(mxSheetMarginEdt->get_value( FieldUnit::MM_100TH ));
PrinterController::MultiPageSetup aMPS;
aMPS.nRows = nRows;
aMPS.nColumns = nCols;
aMPS.nLeftMargin =
aMPS.nTopMargin =
aMPS.nRightMargin =
aMPS.nBottomMargin = nSheetMargin;
aMPS.nHorizontalSpacing =
aMPS.nVerticalSpacing = nPageMargin;
aMPS.bDrawBorder = mxBorderCB->get_active();
aMPS.nOrder = static_cast<NupOrderType>(mxNupOrderBox->get_active());
int nOrientationMode = mxOrientationBox->get_active();
if( nOrientationMode == ORIENTATION_LANDSCAPE )
aMPS.aPaperSize = maNupLandscapeSize;
else if( nOrientationMode == ORIENTATION_PORTRAIT )
aMPS.aPaperSize = maNupPortraitSize;
else // automatic mode
{
// get size of first real page to see if it is portrait or landscape
// we assume same page sizes for all the pages for this
Size aPageSize = getJobPageSize();
Size aMultiSize( aPageSize.Width() * nCols, aPageSize.Height() * nRows );
if( aMultiSize.Width() > aMultiSize.Height() ) // fits better on landscape
{
aMPS.aPaperSize = maNupLandscapeSize;
setPaperOrientation( Orientation::Landscape, false );
}
else
{
aMPS.aPaperSize = maNupPortraitSize;
setPaperOrientation( Orientation::Portrait, false );
}
}
maPController->setMultipage( aMPS );
mxNupOrder->setValues( aMPS.nOrder, nCols, nRows );
if (i_bMayUseCache)
maUpdatePreviewIdle.Start();
else
maUpdatePreviewNoCacheIdle.Start();
}
void PrintDialog::updateNupFromPages( bool i_bMayUseCache )
{
int nPages = mxNupPagesBox->get_active_id().toInt32();
int nRows = mxNupRowsEdt->get_value();
int nCols = mxNupColEdt->get_value();
tools::Long nPageMargin = mxPageMarginEdt->denormalize(mxPageMarginEdt->get_value( FieldUnit::MM_100TH ));
tools::Long nSheetMargin = mxSheetMarginEdt->denormalize(mxSheetMarginEdt->get_value( FieldUnit::MM_100TH ));
bool bCustom = false;
if( nPages == 1 )
{
nRows = nCols = 1;
nSheetMargin = 0;
nPageMargin = 0;
}
else if( nPages == 2 || nPages == 4 || nPages == 6 || nPages == 9 || nPages == 16 )
{
Size aJobPageSize( getJobPageSize() );
bool bPortrait = aJobPageSize.Width() < aJobPageSize.Height();
if( nPages == 2 )
{
if( bPortrait )
{
nRows = 1;
nCols = 2;
}
else
{
nRows = 2;
nCols = 1;
}
}
else if( nPages == 4 )
nRows = nCols = 2;
else if( nPages == 6 )
{
if( bPortrait )
{
nRows = 2;
nCols = 3;
}
else
{
nRows = 3;
nCols = 2;
}
}
else if( nPages == 9 )
nRows = nCols = 3;
else if( nPages == 16 )
nRows = nCols = 4;
nPageMargin = 0;
nSheetMargin = 0;
}
else
bCustom = true;
if( nPages > 1 )
{
// set upper limits for margins based on job page size and rows/columns
Size aSize( getJobPageSize() );
// maximum sheet distance: 1/2 sheet
tools::Long nHorzMax = aSize.Width()/2;
tools::Long nVertMax = aSize.Height()/2;
if( nSheetMargin > nHorzMax )
nSheetMargin = nHorzMax;
if( nSheetMargin > nVertMax )
nSheetMargin = nVertMax;
mxSheetMarginEdt->set_max(
mxSheetMarginEdt->normalize(
std::min(nHorzMax, nVertMax) ), FieldUnit::MM_100TH );
// maximum page distance
nHorzMax = (aSize.Width() - 2*nSheetMargin);
if( nCols > 1 )
nHorzMax /= (nCols-1);
nVertMax = (aSize.Height() - 2*nSheetMargin);
if( nRows > 1 )
nHorzMax /= (nRows-1);
if( nPageMargin > nHorzMax )
nPageMargin = nHorzMax;
if( nPageMargin > nVertMax )
nPageMargin = nVertMax;
mxPageMarginEdt->set_max(
mxSheetMarginEdt->normalize(
std::min(nHorzMax, nVertMax ) ), FieldUnit::MM_100TH );
}
mxNupRowsEdt->set_value( nRows );
mxNupColEdt->set_value( nCols );
mxPageMarginEdt->set_value( mxPageMarginEdt->normalize( nPageMargin ), FieldUnit::MM_100TH );
mxSheetMarginEdt->set_value( mxSheetMarginEdt->normalize( nSheetMargin ), FieldUnit::MM_100TH );
showAdvancedControls( bCustom );
updateNup( i_bMayUseCache );
}
void PrintDialog::enableNupControls( bool bEnable )
{
mxNupPagesBox->set_sensitive( bEnable );
mxNupNumPagesTxt->set_sensitive( bEnable );
mxNupColEdt->set_sensitive( bEnable );
mxNupTimesTxt->set_sensitive( bEnable );
mxNupRowsEdt->set_sensitive( bEnable );
mxPageMarginTxt1->set_sensitive( bEnable );
mxPageMarginEdt->set_sensitive( bEnable );
mxPageMarginTxt2->set_sensitive( bEnable );
mxSheetMarginTxt1->set_sensitive( bEnable );
mxSheetMarginEdt->set_sensitive( bEnable );
mxSheetMarginTxt2->set_sensitive( bEnable );
mxNupOrderTxt->set_sensitive( bEnable );
mxNupOrderBox->set_sensitive( bEnable );
mxNupOrderWin->set_sensitive( bEnable );
mxBorderCB->set_sensitive( bEnable );
}
void PrintDialog::showAdvancedControls( bool i_bShow )
{
mxNupNumPagesTxt->set_visible( i_bShow );
mxNupColEdt->set_visible( i_bShow );
mxNupTimesTxt->set_visible( i_bShow );
mxNupRowsEdt->set_visible( i_bShow );
mxPageMarginTxt1->set_visible( i_bShow );
mxPageMarginEdt->set_visible( i_bShow );
mxPageMarginTxt2->set_visible( i_bShow );
mxSheetMarginTxt1->set_visible( i_bShow );
mxSheetMarginEdt->set_visible( i_bShow );
mxSheetMarginTxt2->set_visible( i_bShow );
}
namespace
{
void setHelpId( weld::Widget* i_pWindow, const Sequence< OUString >& i_rHelpIds, sal_Int32 i_nIndex )
{
if( i_nIndex >= 0 && i_nIndex < i_rHelpIds.getLength() )
i_pWindow->set_help_id( i_rHelpIds.getConstArray()[i_nIndex] );
}
void setHelpText( weld::Widget* i_pWindow, const Sequence< OUString >& i_rHelpTexts, sal_Int32 i_nIndex )
{
// without a help text set and the correct smartID,
// help texts will be retrieved from the online help system
if( i_nIndex >= 0 && i_nIndex < i_rHelpTexts.getLength() )
i_pWindow->set_tooltip_text(i_rHelpTexts.getConstArray()[i_nIndex]);
}
}
void PrintDialog::setupOptionalUI()
{
const Sequence< PropertyValue >& rOptions( maPController->getUIOptions() );
for( const auto& rOption : rOptions )
{
if (rOption.Name == "OptionsUIFile")
{
OUString sOptionsUIFile;
rOption.Value >>= sOptionsUIFile;
mxCustomOptionsUIBuilder = Application::CreateBuilder(mxCustom.get(), sOptionsUIFile);
std::unique_ptr<weld::Container> xWindow = mxCustomOptionsUIBuilder->weld_container(u"box"_ustr);
xWindow->set_help_id(u"vcl/ui/printdialog/PrintDialog"_ustr);
xWindow->show();
continue;
}
Sequence< beans::PropertyValue > aOptProp;
rOption.Value >>= aOptProp;
// extract ui element
OUString aCtrlType;
OUString aID;
OUString aText;
OUString aPropertyName;
Sequence< OUString > aChoices;
Sequence< sal_Bool > aChoicesDisabled;
Sequence< OUString > aHelpTexts;
Sequence< OUString > aIDs;
Sequence< OUString > aHelpIds;
sal_Int64 nMinValue = 0, nMaxValue = 0;
OUString aGroupingHint;
for (const beans::PropertyValue& rEntry : aOptProp)
{
if ( rEntry.Name == "ID" )
{
rEntry.Value >>= aIDs;
aID = aIDs[0];
}
if ( rEntry.Name == "Text" )
{
rEntry.Value >>= aText;
}
else if ( rEntry.Name == "ControlType" )
{
rEntry.Value >>= aCtrlType;
}
else if ( rEntry.Name == "Choices" )
{
rEntry.Value >>= aChoices;
}
else if ( rEntry.Name == "ChoicesDisabled" )
{
rEntry.Value >>= aChoicesDisabled;
}
else if ( rEntry.Name == "Property" )
{
PropertyValue aVal;
rEntry.Value >>= aVal;
aPropertyName = aVal.Name;
}
else if ( rEntry.Name == "Enabled" )
{
}
else if ( rEntry.Name == "GroupingHint" )
{
rEntry.Value >>= aGroupingHint;
}
else if ( rEntry.Name == "DependsOnName" )
{
}
else if ( rEntry.Name == "DependsOnEntry" )
{
}
else if ( rEntry.Name == "AttachToDependency" )
{
}
else if ( rEntry.Name == "MinValue" )
{
rEntry.Value >>= nMinValue;
}
else if ( rEntry.Name == "MaxValue" )
{
rEntry.Value >>= nMaxValue;
}
else if ( rEntry.Name == "HelpText" )
{
if( ! (rEntry.Value >>= aHelpTexts) )
{
OUString aHelpText;
if( rEntry.Value >>= aHelpText )
{
aHelpTexts.realloc( 1 );
*aHelpTexts.getArray() = aHelpText;
}
}
}
else if ( rEntry.Name == "HelpId" )
{
if( ! (rEntry.Value >>= aHelpIds ) )
{
OUString aHelpId;
if( rEntry.Value >>= aHelpId )
{
aHelpIds.realloc( 1 );
*aHelpIds.getArray() = aHelpId;
}
}
}
else if ( rEntry.Name == "HintNoLayoutPage" )
{
bool bHasLayoutFrame = false;
rEntry.Value >>= bHasLayoutFrame;
mbShowLayoutFrame = !bHasLayoutFrame;
}
}
if (aCtrlType == "Group")
{
aID = "custom";
weld::Container* pPage = mxTabCtrl->get_page(aID);
if (!pPage)
continue;
mxTabCtrl->set_tab_label_text(aID, aText);
// set help id
if (aHelpIds.hasElements())
pPage->set_help_id(aHelpIds[0]);
// set help text
if (aHelpTexts.hasElements())
pPage->set_tooltip_text(aHelpTexts[0]);
pPage->show();
}
else if (aCtrlType == "Subgroup" && !aID.isEmpty())
{
std::unique_ptr<weld::Widget> xWidget;
// since 'New Print Dialog Design' fromwhich in calc is not a frame anymore
if (aID == "fromwhich")
{
std::unique_ptr<weld::Label> xLabel = m_xBuilder->weld_label(aID);
xLabel->set_label(aText);
xWidget = std::move(xLabel);
}
else
{
std::unique_ptr<weld::Frame> xFrame = m_xBuilder->weld_frame(aID);
if (!xFrame && mxCustomOptionsUIBuilder)
xFrame = mxCustomOptionsUIBuilder->weld_frame(aID);
if (xFrame)
{
xFrame->set_label(aText);
xWidget = std::move(xFrame);
}
}
if (!xWidget)
continue;
// set help id
setHelpId(xWidget.get(), aHelpIds, 0);
// set help text
setHelpText(xWidget.get(), aHelpTexts, 0);
xWidget->show();
}
// EVIL
else if( aCtrlType == "Bool" && aGroupingHint == "LayoutPage" && aPropertyName == "PrintProspect" )
{
mxBrochureBtn->set_label(aText);
mxBrochureBtn->show();
bool bVal = false;
PropertyValue* pVal = maPController->getValue( aPropertyName );
if( pVal )
pVal->Value >>= bVal;
mxBrochureBtn->set_active( bVal );
mxBrochureBtn->set_sensitive( maPController->isUIOptionEnabled( aPropertyName ) && pVal != nullptr );
maPropertyToWindowMap[aPropertyName].emplace_back(mxBrochureBtn.get());
maControlToPropertyMap[mxBrochureBtn.get()] = aPropertyName;
// set help id
setHelpId( mxBrochureBtn.get(), aHelpIds, 0 );
// set help text
setHelpText( mxBrochureBtn.get(), aHelpTexts, 0 );
}
else if (aCtrlType == "Bool")
{
// add a check box
std::unique_ptr<weld::CheckButton> xNewBox = m_xBuilder->weld_check_button(aID);
if (!xNewBox && mxCustomOptionsUIBuilder)
xNewBox = mxCustomOptionsUIBuilder->weld_check_button(aID);
if (!xNewBox)
continue;
xNewBox->set_label( aText );
xNewBox->show();
bool bVal = false;
PropertyValue* pVal = maPController->getValue( aPropertyName );
if( pVal )
pVal->Value >>= bVal;
xNewBox->set_active( bVal );
xNewBox->connect_toggled( LINK( this, PrintDialog, UIOption_CheckHdl ) );
maExtraControls.emplace_back(std::move(xNewBox));
weld::Widget* pWidget = maExtraControls.back().get();
maPropertyToWindowMap[aPropertyName].emplace_back(pWidget);
maControlToPropertyMap[pWidget] = aPropertyName;
// set help id
setHelpId(pWidget, aHelpIds, 0);
// set help text
setHelpText(pWidget, aHelpTexts, 0);
}
else if (aCtrlType == "Radio")
{
sal_Int32 nCurHelpText = 0;
// iterate options
sal_Int32 nSelectVal = 0;
PropertyValue* pVal = maPController->getValue( aPropertyName );
if( pVal && pVal->Value.hasValue() )
pVal->Value >>= nSelectVal;
for( sal_Int32 m = 0; m < aChoices.getLength(); m++ )
{
aID = aIDs[m];
std::unique_ptr<weld::RadioButton> xBtn = m_xBuilder->weld_radio_button(aID);
if (!xBtn && mxCustomOptionsUIBuilder)
xBtn = mxCustomOptionsUIBuilder->weld_radio_button(aID);
if (!xBtn)
continue;
xBtn->set_label( aChoices[m] );
xBtn->set_active( m == nSelectVal );
xBtn->connect_toggled( LINK( this, PrintDialog, UIOption_RadioHdl ) );
if( aChoicesDisabled.getLength() > m && aChoicesDisabled[m] )
xBtn->set_sensitive( false );
xBtn->show();
maExtraControls.emplace_back(std::move(xBtn));
weld::Widget* pWidget = maExtraControls.back().get();
maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget);
maControlToPropertyMap[pWidget] = aPropertyName;
maControlToNumValMap[pWidget] = m;
// set help id
setHelpId( pWidget, aHelpIds, nCurHelpText );
// set help text
setHelpText( pWidget, aHelpTexts, nCurHelpText );
nCurHelpText++;
}
}
else if ( aCtrlType == "List" )
{
std::unique_ptr<weld::ComboBox> xList = m_xBuilder->weld_combo_box(aID);
if (!xList && mxCustomOptionsUIBuilder)
xList = mxCustomOptionsUIBuilder->weld_combo_box(aID);
if (!xList)
continue;
// iterate options
for (const auto& rChoice : aChoices)
xList->append_text(rChoice);
sal_Int32 nSelectVal = 0;
PropertyValue* pVal = maPController->getValue( aPropertyName );
if( pVal && pVal->Value.hasValue() )
pVal->Value >>= nSelectVal;
xList->set_active(nSelectVal);
xList->connect_changed( LINK( this, PrintDialog, UIOption_SelectHdl ) );
xList->show();
maExtraControls.emplace_back(std::move(xList));
weld::Widget* pWidget = maExtraControls.back().get();
maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget);
maControlToPropertyMap[pWidget] = aPropertyName;
// set help id
setHelpId( pWidget, aHelpIds, 0 );
// set help text
setHelpText( pWidget, aHelpTexts, 0 );
}
else if ( aCtrlType == "Range" )
{
std::unique_ptr<weld::SpinButton> xField = m_xBuilder->weld_spin_button(aID);
if (!xField && mxCustomOptionsUIBuilder)
xField = mxCustomOptionsUIBuilder->weld_spin_button(aID);
if (!xField)
continue;
// set min/max and current value
if(nMinValue != nMaxValue)
xField->set_range(nMinValue, nMaxValue);
sal_Int64 nCurVal = 0;
PropertyValue* pVal = maPController->getValue( aPropertyName );
if( pVal && pVal->Value.hasValue() )
pVal->Value >>= nCurVal;
xField->set_value( nCurVal );
xField->connect_value_changed( LINK( this, PrintDialog, UIOption_SpinModifyHdl ) );
xField->show();
maExtraControls.emplace_back(std::move(xField));
weld::Widget* pWidget = maExtraControls.back().get();
maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget);
maControlToPropertyMap[pWidget] = aPropertyName;
// set help id
setHelpId( pWidget, aHelpIds, 0 );
// set help text
setHelpText( pWidget, aHelpTexts, 0 );
}
else if (aCtrlType == "Edit")
{
std::unique_ptr<weld::Entry> xField = m_xBuilder->weld_entry(aID);
if (!xField && mxCustomOptionsUIBuilder)
xField = mxCustomOptionsUIBuilder->weld_entry(aID);
if (!xField)
continue;
OUString aCurVal;
PropertyValue* pVal = maPController->getValue( aPropertyName );
if( pVal && pVal->Value.hasValue() )
pVal->Value >>= aCurVal;
xField->set_text( aCurVal );
xField->connect_changed( LINK( this, PrintDialog, UIOption_EntryModifyHdl ) );
xField->show();
maExtraControls.emplace_back(std::move(xField));
weld::Widget* pWidget = maExtraControls.back().get();
maPropertyToWindowMap[ aPropertyName ].emplace_back(pWidget);
maControlToPropertyMap[pWidget] = aPropertyName;
// set help id
setHelpId( pWidget, aHelpIds, 0 );
// set help text
setHelpText( pWidget, aHelpTexts, 0 );
}
else
{
SAL_WARN( "vcl", "Unsupported UI option: \"" << aCtrlType << '"');
}
}
// #i106506# if no brochure button, then the singular Pages radio button
// makes no sense, so replace it by a FixedText label
if (!mxBrochureBtn->get_visible() && mxPagesBtn->get_visible())
{
mxPagesBoxTitleTxt->set_label(mxPagesBtn->get_label());
mxPagesBoxTitleTxt->show();
mxPagesBtn->hide();
mxNupPagesBox->set_accessible_relation_labeled_by(mxPagesBoxTitleTxt.get());
}
// update enable states
checkOptionalControlDependencies();
// print range not shown (currently math only) -> hide spacer line and reverse order
if (!mxPageRangeEdit->get_visible())
{
mxReverseOrderBox->hide();
}
if (!mxCustomOptionsUIBuilder)
mxTabCtrl->remove_page(mxTabCtrl->get_page_ident(1));
}
void PrintDialog::makeEnabled( weld::Widget* i_pWindow )
{
auto it = maControlToPropertyMap.find( i_pWindow );
if( it != maControlToPropertyMap.end() )
{
OUString aDependency( maPController->makeEnabled( it->second ) );
if( !aDependency.isEmpty() )
updateWindowFromProperty( aDependency );
}
}
void PrintDialog::updateWindowFromProperty( const OUString& i_rProperty )
{
beans::PropertyValue* pValue = maPController->getValue( i_rProperty );
auto it = maPropertyToWindowMap.find( i_rProperty );
if( !(pValue && it != maPropertyToWindowMap.end()) )
return;
const auto& rWindows( it->second );
if( rWindows.empty() )
return;
bool bVal = false;
sal_Int32 nVal = -1;
if( pValue->Value >>= bVal )
{
// we should have a CheckBox for this one
weld::CheckButton* pBox = dynamic_cast<weld::CheckButton*>(rWindows.front());
if( pBox )
{
pBox->set_active( bVal );
}
else if ( i_rProperty == "PrintProspect" )
{
// EVIL special case
if( bVal )
mxBrochureBtn->set_active(true);
else
mxPagesBtn->set_active(true);
}
else
{
SAL_WARN( "vcl", "missing a checkbox" );
}
}
else if( pValue->Value >>= nVal )
{
// this could be a ListBox or a RadioButtonGroup
weld::ComboBox* pList = dynamic_cast<weld::ComboBox*>(rWindows.front());
if( pList )
{
pList->set_active( static_cast< sal_uInt16 >(nVal) );
}
else if( nVal >= 0 && o3tl::make_unsigned(nVal) < rWindows.size() )
{
weld::RadioButton* pBtn = dynamic_cast<weld::RadioButton*>(rWindows[nVal]);
SAL_WARN_IF( !pBtn, "vcl", "unexpected control for property" );
if( pBtn )
pBtn->set_active(true);
}
}
}
bool PrintDialog::isPrintToFile() const
{
return ( mxPrinters->get_active() == 0 );
}
bool PrintDialog::isCollate() const
{
return mxCopyCountField->get_value() > 1 && mxCollateBox->get_active();
}
bool PrintDialog::isSingleJobs() const
{
return mxSingleJobsBox->get_active();
}
bool PrintDialog::hasPreview() const
{
return mxPreviewBox->get_active();
}
PropertyValue* PrintDialog::getValueForWindow( weld::Widget* i_pWindow ) const
{
PropertyValue* pVal = nullptr;
auto it = maControlToPropertyMap.find( i_pWindow );
if( it != maControlToPropertyMap.end() )
{
pVal = maPController->getValue( it->second );
SAL_WARN_IF( !pVal, "vcl", "property value not found" );
}
else
{
OSL_FAIL( "changed control not in property map" );
}
return pVal;
}
IMPL_LINK(PrintDialog, ToggleHdl, weld::Toggleable&, rButton, void)
{
if (&rButton == mxPreviewBox.get())
{
maUpdatePreviewIdle.Start();
}
else if( &rButton == mxBorderCB.get() )
{
updateNup();
}
else if (&rButton == mxSingleJobsBox.get())
{
maPController->setValue( u"SinglePrintJobs"_ustr,
Any( isSingleJobs() ) );
checkControlDependencies();
}
else if( &rButton == mxCollateBox.get() )
{
maPController->setValue( u"Collate"_ustr,
Any( isCollate() ) );
checkControlDependencies();
}
else if( &rButton == mxReverseOrderBox.get() )
{
bool bChecked = mxReverseOrderBox->get_active();
maPController->setReversePrint( bChecked );
maPController->setValue( u"PrintReverse"_ustr,
Any( bChecked ) );
maUpdatePreviewIdle.Start();
}
else if (&rButton == mxBrochureBtn.get())
{
PropertyValue* pVal = getValueForWindow(mxBrochureBtn.get());
if( pVal )
{
bool bVal = mxBrochureBtn->get_active();
pVal->Value <<= bVal;
checkOptionalControlDependencies();
// update preview and page settings
maUpdatePreviewNoCacheIdle.Start();
}
if (mxBrochureBtn->get_active())
{
mxOrientationBox->set_sensitive( false );
mxOrientationBox->set_active( ORIENTATION_LANDSCAPE );
mxNupPagesBox->set_active( 0 );
updateNupFromPages();
showAdvancedControls( false );
enableNupControls( false );
}
else
{
mxOrientationBox->set_sensitive( true );
mxOrientationBox->set_active( ORIENTATION_AUTOMATIC );
updatePageSize(mxOrientationBox->get_active());
enableNupControls( true );
updateNupFromPages();
}
}
}
IMPL_LINK(PrintDialog, ClickHdl, weld::Button&, rButton, void)
{
if (&rButton == mxOKButton.get() || &rButton == mxCancelButton.get())
{
storeToSettings();
m_xDialog->response(&rButton == mxOKButton.get() ? RET_OK : RET_CANCEL);
}
else if( &rButton == mxForwardBtn.get() )
{
previewForward();
}
else if( &rButton == mxBackwardBtn.get() )
{
previewBackward();
}
else if( &rButton == mxFirstBtn.get() )
{
previewFirst();
}
else if( &rButton == mxLastBtn.get() )
{
previewLast();
}
else
{
if( &rButton == mxSetupButton.get() )
{
maPController->setupPrinter(m_xDialog.get());
if ( !isPrintToFile() )
{
VclPtr<Printer> aPrt( maPController->getPrinter() );
mePaper = aPrt->GetPaper();
for (int nPaper = 0; nPaper < aPrt->GetPaperInfoCount(); nPaper++ )
{
PaperInfo aInfo = aPrt->GetPaperInfo( nPaper );
aInfo.doSloppyFit(true);
Paper ePaper = aInfo.getPaper();
if ( mePaper == ePaper )
{
mxPaperSizeBox->set_active( nPaper );
break;
}
}
}
updateOrientationBox( false );
updatePageSize(mxOrientationBox->get_active());
setupPaperSidesBox();
// tdf#63905 don't use cache: page size may change
maUpdatePreviewNoCacheIdle.Start();
}
checkControlDependencies();
}
}
IMPL_LINK_NOARG( PrintDialog, SelectPrinterHdl, weld::ComboBox&, void )
{
if (!isPrintToFile())
{
OUString aNewPrinter(mxPrinters->get_active_text());
// set new printer
maPController->setPrinter(VclPtrInstance<Printer>(aNewPrinter));
maPController->resetPrinterOptions(false);
// invalidate page cache and start fresh
maPController->invalidatePageCache();
maFirstPageSize = Size();
updateOrientationBox();
updatePageSize(mxOrientationBox->get_active());
// update text fields
mxOKButton->set_label(maPrintText);
updatePrinterText();
updateNup(false);
setPaperSizes();
maUpdatePreviewIdle.Start();
}
else // print to file
{
// use the default printer or FIXME: the last used one?
maPController->setPrinter(VclPtrInstance<Printer>(Printer::GetDefaultPrinterName()));
mxOKButton->set_label(maPrintToFileText);
maPController->resetPrinterOptions(true);
setPaperSizes();
updateOrientationBox();
updatePageSize(mxOrientationBox->get_active());
maUpdatePreviewIdle.Start();
}
setupPaperSidesBox();
// Related: tdf#159995 changing a listbox's active item does not
// trigger an update to the preview so force an update to the
// preview by calling each active listbox's select handler after
// changing the active printer.
if (mxOrientationBox->get_sensitive())
SelectOrientationHdl(*mxOrientationBox);
if (mxPaperSizeBox->get_sensitive())
SelectPaperSizeHdl(*mxPaperSizeBox);
}
IMPL_LINK_NOARG(PrintDialog, SelectPaperSidesHdl, weld::ComboBox&, void)
{
DuplexMode eDuplex = static_cast<DuplexMode>(mxPaperSidesBox->get_active() + 1);
maPController->getPrinter()->SetDuplexMode(eDuplex);
}
IMPL_LINK_NOARG(PrintDialog, SelectOrientationHdl, weld::ComboBox&, void)
{
int nOrientation = mxOrientationBox->get_active();
if (nOrientation != ORIENTATION_AUTOMATIC)
setPaperOrientation(static_cast<Orientation>(nOrientation - 1), true);
updatePageSize(nOrientation);
updateNup(false);
}
IMPL_LINK_NOARG(PrintDialog, SelectNupOrderHdl, weld::ComboBox&, void)
{
updateNup();
}
IMPL_LINK_NOARG(PrintDialog, SelectNupPagesHdl, weld::ComboBox&, void)
{
if (!mxPagesBtn->get_active())
mxPagesBtn->set_active(true);
updatePageSize(mxOrientationBox->get_active());
updateNupFromPages(false);
}
IMPL_LINK_NOARG(PrintDialog, SelectPaperSizeHdl, weld::ComboBox&, void)
{
VclPtr<Printer> aPrt(maPController->getPrinter());
PaperInfo aInfo = aPrt->GetPaperInfo(mxPaperSizeBox->get_active());
aInfo.doSloppyFit(true);
mePaper = aInfo.getPaper();
if (mePaper == PAPER_USER)
aPrt->SetPaperSizeUser(Size(aInfo.getWidth(), aInfo.getHeight()));
else
aPrt->SetPaper(mePaper);
maPController->setPaperSizeFromUser(Size(aInfo.getWidth(), aInfo.getHeight()));
updatePageSize(mxOrientationBox->get_active());
maUpdatePreviewNoCacheIdle.Start();
}
IMPL_LINK_NOARG(PrintDialog, MetricSpinModifyHdl, weld::MetricSpinButton&, void)
{
checkControlDependencies();
updateNupFromPages();
}
IMPL_LINK_NOARG(PrintDialog, FocusOutHdl, weld::Widget&, void)
{
ActivateHdl(*mxPageEdit);
}
IMPL_LINK_NOARG(PrintDialog, ActivateHdl, weld::Entry&, bool)
{
sal_Int32 nPage = mxPageEdit->get_text().toInt32();
if (nPage < 1)
{
nPage = 1;
mxPageEdit->set_text(u"1"_ustr);
}
else if (nPage > mnCachedPages)
{
nPage = mnCachedPages;
mxPageEdit->set_text(OUString::number(mnCachedPages));
}
int nNewCurPage = nPage - 1;
if (nNewCurPage != mnCurPage)
{
mnCurPage = nNewCurPage;
maUpdatePreviewIdle.Start();
}
return true;
}
IMPL_LINK( PrintDialog, SpinModifyHdl, weld::SpinButton&, rEdit, void )
{
checkControlDependencies();
if (&rEdit == mxNupRowsEdt.get() || &rEdit == mxNupColEdt.get())
{
updateNupFromPages();
}
else if( &rEdit == mxCopyCountField.get() )
{
maPController->setValue( u"CopyCount"_ustr,
Any( sal_Int32(mxCopyCountField->get_value()) ) );
maPController->setValue( u"Collate"_ustr,
Any( isCollate() ) );
}
}
IMPL_LINK( PrintDialog, UIOption_CheckHdl, weld::Toggleable&, i_rBox, void )
{
PropertyValue* pVal = getValueForWindow( &i_rBox );
if( pVal )
{
makeEnabled( &i_rBox );
bool bVal = i_rBox.get_active();
pVal->Value <<= bVal;
checkOptionalControlDependencies();
// update preview and page settings
maUpdatePreviewNoCacheIdle.Start();
}
}
IMPL_LINK( PrintDialog, UIOption_RadioHdl, weld::Toggleable&, i_rBtn, void )
{
// this handler gets called for all radiobuttons that get unchecked, too
// however we only want one notification for the new value (that is for
// the button that gets checked)
if( !i_rBtn.get_active() )
return;
PropertyValue* pVal = getValueForWindow( &i_rBtn );
auto it = maControlToNumValMap.find( &i_rBtn );
if( !(pVal && it != maControlToNumValMap.end()) )
return;
makeEnabled( &i_rBtn );
sal_Int32 nVal = it->second;
pVal->Value <<= nVal;
updateOrientationBox();
checkOptionalControlDependencies();
// tdf#41205 give focus to the page range edit if the corresponding radio button was selected
if (pVal->Name == "PrintContent" && mxPageRangesRadioButton->get_active())
mxPageRangeEdit->grab_focus();
// update preview and page settings
maUpdatePreviewNoCacheIdle.Start();
}
IMPL_LINK( PrintDialog, UIOption_SelectHdl, weld::ComboBox&, i_rBox, void )
{
PropertyValue* pVal = getValueForWindow( &i_rBox );
if( !pVal )
return;
makeEnabled( &i_rBox );
sal_Int32 nVal( i_rBox.get_active() );
pVal->Value <<= nVal;
//If we are in impress we start in print slides mode and get a
//maFirstPageSize for slides which are usually landscape mode, if we
//change to notes which are usually in portrait mode, and then visit
//n-up print, we will assume notes are in landscape unless we throw
//away maFirstPageSize when we change page content type
if (pVal->Name == "PageContentType")
{
maFirstPageSize = Size();
css::uno::Sequence<sal_Bool> aChoicesDisabled{
false, // Original size
false, // Fit to printable page
(nVal == 2) /*Notes*/ ? true : false, // disable/enable Multiple sheets of paper
(nVal == 2) /*Notes*/ ? true : false // disable/enable Tile sheet of paper
};
maPController->setUIChoicesDisabled(u"PageOptions"_ustr, aChoicesDisabled);
}
checkOptionalControlDependencies();
updatePageSize(mxOrientationBox->get_active());
// update preview and page settings
maUpdatePreviewNoCacheIdle.Start();
}
IMPL_LINK( PrintDialog, UIOption_SpinModifyHdl, weld::SpinButton&, i_rBox, void )
{
PropertyValue* pVal = getValueForWindow( &i_rBox );
if( pVal )
{
makeEnabled( &i_rBox );
sal_Int64 nVal = i_rBox.get_value();
pVal->Value <<= nVal;
checkOptionalControlDependencies();
// update preview and page settings
maUpdatePreviewNoCacheIdle.Start();
}
}
IMPL_LINK( PrintDialog, UIOption_EntryModifyHdl, weld::Entry&, i_rBox, void )
{
PropertyValue* pVal = getValueForWindow( &i_rBox );
if( pVal && mxPageRangesRadioButton->get_active() )
{
makeEnabled( &i_rBox );
OUString aVal( i_rBox.get_text() );
pVal->Value <<= aVal;
checkOptionalControlDependencies();
// update preview and page settings
maUpdatePreviewNoCacheIdle.Start();
}
}
void PrintDialog::previewForward()
{
sal_Int32 nValue = mxPageEdit->get_text().toInt32() + 1;
if (nValue <= mnCachedPages)
{
mxPageEdit->set_text(OUString::number(nValue));
ActivateHdl(*mxPageEdit);
}
}
void PrintDialog::previewBackward()
{
sal_Int32 nValue = mxPageEdit->get_text().toInt32() - 1;
if (nValue >= 1)
{
mxPageEdit->set_text(OUString::number(nValue));
ActivateHdl(*mxPageEdit);
}
}
void PrintDialog::previewFirst()
{
mxPageEdit->set_text(u"1"_ustr);
ActivateHdl(*mxPageEdit);
}
void PrintDialog::previewLast()
{
mxPageEdit->set_text(OUString::number(mnCachedPages));
ActivateHdl(*mxPageEdit);
}
static OUString getNewLabel(const OUString& aLabel, int i_nCurr, int i_nMax)
{
OUString aNewText( aLabel.replaceFirst( "%p", OUString::number( i_nCurr ) ) );
aNewText = aNewText.replaceFirst( "%n", OUString::number( i_nMax ) );
return aNewText;
}
// PrintProgressDialog
PrintProgressDialog::PrintProgressDialog(weld::Window* i_pParent, int i_nMax)
: GenericDialogController(i_pParent, u"vcl/ui/printprogressdialog.ui"_ustr, u"PrintProgressDialog"_ustr)
, mbCanceled(false)
, mnCur(0)
, mnMax(i_nMax)
, mxText(m_xBuilder->weld_label(u"label"_ustr))
, mxProgress(m_xBuilder->weld_progress_bar(u"progressbar"_ustr))
, mxButton(m_xBuilder->weld_button(u"cancel"_ustr))
{
if( mnMax < 1 )
mnMax = 1;
maStr = mxText->get_label();
//just multiply largest value by 10 and take the width of that string as
//the max size we will want
mxText->set_label(getNewLabel(maStr, mnMax * 10, mnMax * 10));
mxText->set_size_request(mxText->get_preferred_size().Width(), -1);
//Pick a useful max width
mxProgress->set_size_request(mxProgress->get_approximate_digit_width() * 25, -1);
mxButton->connect_clicked( LINK( this, PrintProgressDialog, ClickHdl ) );
// after this patch f7157f04fab298423e2c4f6a7e5f8e361164b15f, we have seen the calc Max string (sometimes) look above
// now init to the right start values
mxText->set_label(getNewLabel(maStr, mnCur, mnMax));
}
PrintProgressDialog::~PrintProgressDialog()
{
}
IMPL_LINK_NOARG(PrintProgressDialog, ClickHdl, weld::Button&, void)
{
mbCanceled = true;
}
void PrintProgressDialog::setProgress( int i_nCurrent )
{
mnCur = i_nCurrent;
if( mnMax < 1 )
mnMax = 1;
mxText->set_label(getNewLabel(maStr, mnCur, mnMax));
// here view the dialog, with the right label
mxProgress->set_percentage(mnCur*100/mnMax);
}
void PrintProgressDialog::tick()
{
if( mnCur < mnMax )
setProgress( ++mnCur );
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'DrawFrame' is required to be utilized.
↑ V530 The return value of function 'appendAscii' is required to be utilized.
↑ V530 The return value of function 'appendAscii' is required to be utilized.
↑ V530 The return value of function 'DrawFrame' is required to be utilized.
↑ V547 Expression 'nMinValue != nMaxValue' is always false.
↑ V547 Expression 'bVal' is always false.