/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <config_wasm_strip.h>
#include <oox/drawingml/shape.hxx>
#include <drawingml/customshapeproperties.hxx>
#include <oox/drawingml/theme.hxx>
#include <drawingml/fillproperties.hxx>
#include <drawingml/fontworkhelpers.hxx>
#include <drawingml/graphicproperties.hxx>
#include <drawingml/lineproperties.hxx>
#include <drawingml/presetgeometrynames.hxx>
#include <drawingml/shape3dproperties.hxx>
#include <drawingml/scene3dhelper.hxx>
#include <oox/drawingml/effectproperties.hxx>
#include <oox/drawingml/shapepropertymap.hxx>
#include <drawingml/textbody.hxx>
#include <drawingml/textparagraph.hxx>
#include <drawingml/ThemeOverrideFragmentHandler.hxx>
#include <drawingml/table/tableproperties.hxx>
#include <oox/drawingml/chart/chartconverter.hxx>
#include <drawingml/chart/chartspacefragment.hxx>
#include <drawingml/chart/chartspacemodel.hxx>
#include <o3tl/safeint.hxx>
#include <o3tl/unit_conversion.hxx>
#include <oox/ppt/pptimport.hxx>
#include <oox/vml/vmldrawing.hxx>
#include <oox/vml/vmlshape.hxx>
#include <oox/vml/vmlshapecontainer.hxx>
#include <oox/core/xmlfilterbase.hxx>
#include <oox/helper/graphichelper.hxx>
#include <oox/helper/propertyset.hxx>
#include <oox/helper/modelobjecthelper.hxx>
#include <oox/mathml/imexport.hxx>
#include <oox/mathml/importutils.hxx>
#include <oox/token/properties.hxx>
#include "diagram/datamodel.hxx"
#include "diagram/diagramhelper.hxx"
#include <comphelper/classids.hxx>
#include <comphelper/propertysequence.hxx>
#include <comphelper/propertyvalue.hxx>
#include <comphelper/sequence.hxx>
#include <comphelper/diagnose_ex.hxx>
#include <tools/gen.hxx>
#include <tools/globname.hxx>
#include <tools/mapunit.hxx>
#include <editeng/unoprnms.hxx>
#include <com/sun/star/awt/FontSlant.hpp>
#include <com/sun/star/awt/Size.hpp>
#include <com/sun/star/awt/XBitmap.hpp>
#include <com/sun/star/awt/FontWeight.hpp>
#include <com/sun/star/graphic/XGraphic.hpp>
#include <com/sun/star/container/XNamed.hpp>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/xml/dom/XDocument.hpp>
#include <com/sun/star/xml/sax/XFastSAXSerializable.hpp>
#include <com/sun/star/drawing/FillStyle.hpp>
#include <com/sun/star/drawing/HomogenMatrix3.hpp>
#include <com/sun/star/drawing/TextVerticalAdjust.hpp>
#include <com/sun/star/drawing/TextHorizontalAdjust.hpp>
#include <com/sun/star/drawing/GraphicExportFilter.hpp>
#include <com/sun/star/drawing/XShapes.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeAdjustmentValue.hpp>
#include <com/sun/star/drawing/XEnhancedCustomShapeDefaulter.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeTextPathMode.hpp>
#include <com/sun/star/drawing/ConnectorType.hpp>
#include <com/sun/star/embed/XEmbeddedObject.hpp>
#include <com/sun/star/text/XText.hpp>
#include <com/sun/star/table/BorderLine2.hpp>
#include <com/sun/star/table/ShadowFormat.hpp>
#include <com/sun/star/chart2/XChartDocument.hpp>
#include <com/sun/star/style/ParagraphAdjust.hpp>
#include <com/sun/star/io/XOutputStream.hpp>
#include <com/sun/star/lang/Locale.hpp>
#include <com/sun/star/i18n/ScriptType.hpp>
#include <com/sun/star/text/WritingMode2.hpp>
#include <basegfx/point/b2dpoint.hxx>
#include <basegfx/polygon/b2dpolygon.hxx>
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <com/sun/star/document/XActionLockable.hpp>
#include <com/sun/star/chart2/data/XDataReceiver.hpp>
#include <officecfg/Office/Common.hxx>
#include <svx/svdobj.hxx>
#include <svx/svdotable.hxx>
#include <svx/svdtrans.hxx>
#include <tools/stream.hxx>
#include <unotools/streamwrap.hxx>
#include <unotools/mediadescriptor.hxx>
#include <vcl/graph.hxx>
#include <vcl/graphicfilter.hxx>
#include <vcl/svapp.hxx>
#include <vcl/wmfexternal.hxx>
#include <sal/log.hxx>
#include <svx/sdtaitm.hxx>
#include <oox/drawingml/diagram/diagram.hxx>
#include <docmodel/theme/Theme.hxx>
#include <i18nlangtag/languagetag.hxx>
#include <i18nlangtag/mslangid.hxx>
using namespace ::oox::core;
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::frame;
using namespace ::com::sun::star::text;
using namespace ::com::sun::star::drawing;
using namespace ::com::sun::star::style;
namespace oox::drawingml {
Shape::Shape()
: mpLinePropertiesPtr( std::make_shared<LineProperties>() )
, mpShapeRefLinePropPtr( std::make_shared<LineProperties>() )
, mpFillPropertiesPtr( std::make_shared<FillProperties>() )
, mpShapeRefFillPropPtr( std::make_shared<FillProperties>() )
, mpGraphicPropertiesPtr( std::make_shared<GraphicProperties>() )
, mpCustomShapePropertiesPtr( std::make_shared<CustomShapeProperties>() )
, mp3DPropertiesPtr( std::make_shared<Shape3DProperties>() )
, mpEffectPropertiesPtr( std::make_shared<EffectProperties>() )
, mpShapeRefEffectPropPtr( std::make_shared<EffectProperties>() )
, mpMasterTextListStyle( std::make_shared<TextListStyle>() )
, mnSubType( 0 )
, meFrameType( FRAMETYPE_GENERIC )
, mnRotation( 0 )
, mnDiagramRotation( 0 )
, mbFlipH( false )
, mbFlipV( false )
, mbHidden( false )
, mbHiddenMasterShape( false )
, mbLocked( false )
, mbWPGChild(false)
, mbLockedCanvas( false )
, mbWordprocessingCanvas(false)
, mbWps( false )
, mbTextBox( false )
, mbHasLinkedTxbx( false )
, maDiagramDoms( 0 )
, mpDiagramHelper( nullptr )
{
setDefaults(/*bDefaultHeight*/true);
}
Shape::Shape( const OUString& rServiceName, bool bDefaultHeight )
: mpLinePropertiesPtr( std::make_shared<LineProperties>() )
, mpShapeRefLinePropPtr( std::make_shared<LineProperties>() )
, mpFillPropertiesPtr( std::make_shared<FillProperties>() )
, mpShapeRefFillPropPtr( std::make_shared<FillProperties>() )
, mpGraphicPropertiesPtr( std::make_shared<GraphicProperties>() )
, mpCustomShapePropertiesPtr( std::make_shared<CustomShapeProperties>() )
, mp3DPropertiesPtr( std::make_shared<Shape3DProperties>() )
, mpEffectPropertiesPtr( std::make_shared<EffectProperties>() )
, mpShapeRefEffectPropPtr( std::make_shared<EffectProperties>() )
, mpMasterTextListStyle( std::make_shared<TextListStyle>() )
, mnSubType( 0 )
, meFrameType( FRAMETYPE_GENERIC )
, mnRotation( 0 )
, mnDiagramRotation( 0 )
, mbFlipH( false )
, mbFlipV( false )
, mbHidden( false )
, mbHiddenMasterShape( false )
, mbLocked( false )
, mbWPGChild(false)
, mbLockedCanvas( false )
, mbWordprocessingCanvas(false)
, mbWps( false )
, mbTextBox( false )
, mbHasLinkedTxbx( false )
, maDiagramDoms( 0 )
, mpDiagramHelper( nullptr )
{
msServiceName = rServiceName;
setDefaults(bDefaultHeight);
}
Shape::Shape( const ShapePtr& pSourceShape )
: mpTextBody(pSourceShape->mpTextBody)
, mpLinePropertiesPtr( pSourceShape->mpLinePropertiesPtr )
, mpShapeRefLinePropPtr( pSourceShape->mpShapeRefLinePropPtr )
, mpFillPropertiesPtr( pSourceShape->mpFillPropertiesPtr )
, mpShapeRefFillPropPtr( pSourceShape->mpShapeRefFillPropPtr )
, mpGraphicPropertiesPtr( pSourceShape->mpGraphicPropertiesPtr )
, mpCustomShapePropertiesPtr( pSourceShape->mpCustomShapePropertiesPtr )
, mpTablePropertiesPtr( pSourceShape->mpTablePropertiesPtr )
, mp3DPropertiesPtr( pSourceShape->mp3DPropertiesPtr )
, mpEffectPropertiesPtr (pSourceShape->mpEffectPropertiesPtr)
, mpShapeRefEffectPropPtr(pSourceShape->mpShapeRefEffectPropPtr)
, maShapeProperties( pSourceShape->maShapeProperties )
, mpMasterTextListStyle( pSourceShape->mpMasterTextListStyle )
, msServiceName( pSourceShape->msServiceName )
, msName( pSourceShape->msName )
, msInternalName( pSourceShape->msInternalName )
, msId( pSourceShape->msId )
, mnSubType( pSourceShape->mnSubType )
, moSubTypeIndex( pSourceShape->moSubTypeIndex )
, maShapeStyleRefs( pSourceShape->maShapeStyleRefs )
, maSize( pSourceShape->maSize )
, maPosition( pSourceShape->maPosition )
, meFrameType( pSourceShape->meFrameType )
, mnRotation( pSourceShape->mnRotation )
, mnDiagramRotation( pSourceShape->mnDiagramRotation )
, mbFlipH( pSourceShape->mbFlipH )
, mbFlipV( pSourceShape->mbFlipV )
, mbHidden( pSourceShape->mbHidden )
, mbHiddenMasterShape( pSourceShape->mbHiddenMasterShape )
, mbLocked( pSourceShape->mbLocked )
, mbWPGChild( pSourceShape->mbWPGChild )
, mbLockedCanvas( pSourceShape->mbLockedCanvas )
, mbWordprocessingCanvas(pSourceShape->mbWordprocessingCanvas)
, mbWps( pSourceShape->mbWps )
, mbTextBox( pSourceShape->mbTextBox )
, mbHasLinkedTxbx(false)
, maDiagramDoms( pSourceShape->maDiagramDoms )
, mnZOrder(pSourceShape->mnZOrder)
, mnZOrderOff(pSourceShape->mnZOrderOff)
, mnDataNodeType(pSourceShape->mnDataNodeType)
, mfAspectRatio(pSourceShape->mfAspectRatio)
, mpDiagramHelper( nullptr )
, msDiagramDataModelID(pSourceShape->msDiagramDataModelID)
{}
Shape::~Shape()
{
// DiagramHelper should not be set here anymore, see
// propagateDiagramHelper below (maybe assert..?)
delete mpDiagramHelper;
}
void Shape::prepareDiagramHelper(
const std::shared_ptr< Diagram >& rDiagramPtr,
const std::shared_ptr<::oox::drawingml::Theme>& rTheme,
bool bSelfCreated)
{
// Prepare Diagram data collecting for this Shape
if( nullptr == mpDiagramHelper && FRAMETYPE_DIAGRAM == meFrameType )
{
mpDiagramHelper = new AdvancedDiagramHelper(
rDiagramPtr,
rTheme,
getSize(),
bSelfCreated);
}
}
void Shape::propagateDiagramHelper()
{
// Propagate collected Diagram data to data holder
if (FRAMETYPE_DIAGRAM == meFrameType && nullptr != mpDiagramHelper)
{
SdrObjGroup* pAnchorObj = dynamic_cast<SdrObjGroup*>(SdrObject::getSdrObjectFromXShape(mxShape));
if(pAnchorObj)
{
mpDiagramHelper->doAnchor(*pAnchorObj, *this);
mpDiagramHelper = nullptr;
}
}
// If propagation failed, delete/cleanup here. Since the DiagramHelper
// holds a Diagram and that this Shape it is necessary - the destructor
// will not be called and will be too late
if (nullptr != mpDiagramHelper)
{
delete mpDiagramHelper;
mpDiagramHelper = nullptr;
}
}
void Shape::migrateDiagramHelperToNewShape(const ShapePtr& pTarget)
{
if(!mpDiagramHelper)
{
return;
}
if(!pTarget)
{
// no migrate target, but cleanup helper
delete mpDiagramHelper;
mpDiagramHelper = nullptr;
return;
}
if(pTarget->mpDiagramHelper)
{
// this should no happen, but if there is already a helper, clean it up
delete pTarget->mpDiagramHelper;
pTarget->mpDiagramHelper = nullptr;
}
// exchange and reset to nullptr
pTarget->mpDiagramHelper = mpDiagramHelper;
mpDiagramHelper = nullptr;
}
table::TablePropertiesPtr const & Shape::getTableProperties()
{
if ( !mpTablePropertiesPtr )
mpTablePropertiesPtr = std::make_shared<table::TableProperties>();
return mpTablePropertiesPtr;
}
void Shape::setDefaults(bool bHeight)
{
maDefaultShapeProperties.setProperty(PROP_TextAutoGrowHeight, false);
maDefaultShapeProperties.setProperty(PROP_TextWordWrap, true);
maDefaultShapeProperties.setProperty(PROP_TextLeftDistance, static_cast< sal_Int32 >( 250 ));
maDefaultShapeProperties.setProperty(PROP_TextUpperDistance, static_cast< sal_Int32 >( 125 ));
maDefaultShapeProperties.setProperty(PROP_TextRightDistance, static_cast< sal_Int32 >( 250 ));
maDefaultShapeProperties.setProperty(PROP_TextLowerDistance, static_cast< sal_Int32 >( 125 ));
if (bHeight)
maDefaultShapeProperties.setProperty(PROP_CharHeight, static_cast< float >( 18.0 ));
maDefaultShapeProperties.setProperty(PROP_TextVerticalAdjust, TextVerticalAdjust_TOP);
maDefaultShapeProperties.setProperty(PROP_ParaAdjust,
static_cast<sal_Int16>(ParagraphAdjust_LEFT));
}
::oox::vml::OleObjectInfo& Shape::setOleObjectType()
{
OSL_ENSURE( meFrameType == FRAMETYPE_GENERIC, "Shape::setOleObjectType - multiple frame types" );
meFrameType = FRAMETYPE_OLEOBJECT;
mxOleObjectInfo = std::make_shared<::oox::vml::OleObjectInfo>( true );
return *mxOleObjectInfo;
}
ChartShapeInfo& Shape::setChartType( bool bEmbedShapes )
{
OSL_ENSURE( meFrameType == FRAMETYPE_GENERIC, "Shape::setChartType - multiple frame types" );
meFrameType = FRAMETYPE_CHART;
if (mbWps)
msServiceName = u"com.sun.star.drawing.temporaryForXMLImportOLE2Shape"_ustr;
else
msServiceName = u"com.sun.star.drawing.OLE2Shape"_ustr;
mxChartShapeInfo = std::make_shared<ChartShapeInfo>( bEmbedShapes );
return *mxChartShapeInfo;
}
void Shape::setDiagramType()
{
OSL_ENSURE( meFrameType == FRAMETYPE_GENERIC, "Shape::setDiagramType - multiple frame types" );
meFrameType = FRAMETYPE_DIAGRAM;
msServiceName = u"com.sun.star.drawing.GroupShape"_ustr;
mnSubType = 0;
}
void Shape::setTableType()
{
OSL_ENSURE( meFrameType == FRAMETYPE_GENERIC, "Shape::setTableType - multiple frame types" );
meFrameType = FRAMETYPE_TABLE;
msServiceName = u"com.sun.star.drawing.TableShape"_ustr;
mnSubType = 0;
}
const ShapeStyleRef* Shape::getShapeStyleRef( sal_Int32 nRefType ) const
{
ShapeStyleRefMap::const_iterator aIt = maShapeStyleRefs.find( nRefType );
return (aIt == maShapeStyleRefs.end()) ? nullptr : &aIt->second;
}
void Shape::addShape(
::oox::core::XmlFilterBase& rFilterBase,
const Theme* pTheme,
const Reference< XShapes >& rxShapes,
const basegfx::B2DHomMatrix& aTransformation,
const FillProperties& rShapeOrParentShapeFillProps,
ShapeIdMap* pShapeMap,
const oox::drawingml::ShapePtr& pParentGroupShape)
{
SAL_INFO("oox.drawingml", "Shape::addShape: id='" << msId << "'");
try
{
OUString sServiceName( msServiceName );
if( !sServiceName.isEmpty() )
{
basegfx::B2DHomMatrix aMatrix( aTransformation );
Reference< XShape > xShape( createAndInsert( rFilterBase, sServiceName, pTheme, rxShapes, false, false, aMatrix, rShapeOrParentShapeFillProps, pParentGroupShape) );
if( pShapeMap && !msId.isEmpty() )
{
(*pShapeMap)[ msId ] = shared_from_this();
}
// if this is a group shape, we have to add also each child shape
Reference< XShapes > xShapes( xShape, UNO_QUERY );
if ( xShapes.is() )
addChildren( rFilterBase, *this, pTheme, xShapes, pShapeMap, aMatrix );
if (mbWordprocessingCanvas && !mbWPGChild)
{
// This is a drawing canvas. In case the canvas has no fill and no stroke, Word does
// not render shadow or glow, even if it is set for the canvas. Thus we disable shadow
// and glow in this case for the ersatz background shape of the drawing canvas.
try
{
oox::drawingml::ShapePtr pBgShape = getChildren().front();
const Reference<css::drawing::XShape>& xBgShape = pBgShape->getXShape();
Reference<XPropertySet> xBgProps(xBgShape, uno::UNO_QUERY);
drawing::FillStyle eFillStyle = drawing::FillStyle_NONE;
xBgProps->getPropertyValue(u"FillStyle"_ustr) >>= eFillStyle;
drawing::LineStyle eLineStyle = drawing::LineStyle_NONE;
xBgProps->getPropertyValue(u"LineStyle"_ustr) >>= eLineStyle;
if (eFillStyle == drawing::FillStyle_NONE
&& eLineStyle == drawing::LineStyle_NONE)
{
xBgProps->setPropertyValue(UNO_NAME_SHADOW, uno::Any(false));
xBgProps->setPropertyValue(u"GlowEffectRadius"_ustr, uno::Any(sal_Int32(0)));
}
}
catch (const Exception&)
{
TOOLS_WARN_EXCEPTION("oox.drawingml", "Shape::addShape mbWordprocessingCanvas");
}
}
if (isWPGChild() && xShape)
{
// This is a wps shape and it is the child of the WPG, now copy the
// the text body properties to the xshape.
Reference<XPropertySet> xChildWPSProperties(xShape, uno::UNO_QUERY);
if (getTextBody() && xChildWPSProperties)
{
xChildWPSProperties->setPropertyValue(
UNO_NAME_TEXT_VERTADJUST,
uno::Any(getTextBody()->getTextProperties().meVA));
xChildWPSProperties->setPropertyValue(
UNO_NAME_TEXT_LEFTDIST,
uno::Any(getTextBody()->getTextProperties().moInsets[0].has_value()
? *getTextBody()->getTextProperties().moInsets[0]
: 0));
xChildWPSProperties->setPropertyValue(
UNO_NAME_TEXT_UPPERDIST,
uno::Any(getTextBody()->getTextProperties().moInsets[1].has_value()
? *getTextBody()->getTextProperties().moInsets[1]
: 0));
xChildWPSProperties->setPropertyValue(
UNO_NAME_TEXT_RIGHTDIST,
uno::Any(getTextBody()->getTextProperties().moInsets[2].has_value()
? *getTextBody()->getTextProperties().moInsets[2]
: 0));
xChildWPSProperties->setPropertyValue(
UNO_NAME_TEXT_LOWERDIST,
uno::Any(getTextBody()->getTextProperties().moInsets[3].has_value()
? *getTextBody()->getTextProperties().moInsets[3]
: 0));
}
// tdf#145147 Set the Hyperlink property to the child wps shape.
if (getShapeProperties().hasProperty(PROP_URL)) try
{
uno::Any aAny = getShapeProperties().getProperty(PROP_URL);
OUString sUrl = aAny.get<OUString>();
if (!sUrl.isEmpty())
xChildWPSProperties->setPropertyValue(UNO_NAME_HYPERLINK, aAny);
}
catch (const Exception&)
{
}
}
if( meFrameType == FRAMETYPE_DIAGRAM )
{
keepDiagramCompatibilityInfo();
// set DiagramHelper at SdrObjGroup
propagateDiagramHelper();
// Check if this is the PPTX import, so far converting SmartArt to a non-editable
// metafile is only implemented for DOCX.
bool bPowerPoint = dynamic_cast<oox::ppt::PowerPointImport*>(&rFilterBase) != nullptr;
if (!officecfg::Office::Common::Filter::Microsoft::Import::SmartArtToShapes::get() && !bPowerPoint)
convertSmartArtToMetafile( rFilterBase );
}
NamedShapePairs* pNamedShapePairs = rFilterBase.getDiagramFontHeights();
if (xShape.is() && pNamedShapePairs)
{
auto itPairs = pNamedShapePairs->find(getInternalName());
if (itPairs != pNamedShapePairs->end())
{
auto it = itPairs->second.find(shared_from_this());
if (it != itPairs->second.end())
{
// Our drawingml::Shape is in the list of an internal name, remember the now
// inserted XShape.
it->second = std::move(xShape);
}
}
}
}
}
catch( const Exception& )
{
TOOLS_WARN_EXCEPTION( "oox.drawingml", "Shape::addShape" );
}
}
void Shape::setLockedCanvas(bool bLockedCanvas)
{
mbLockedCanvas = bLockedCanvas;
}
void Shape::setWordprocessingCanvas(bool bWordprocessingCanvas)
{
mbWordprocessingCanvas = bWordprocessingCanvas;
}
void Shape::setWPGChild(bool bWPG)
{
mbWPGChild = bWPG;
}
void Shape::setWps(bool bWps)
{
mbWps = bWps;
}
void Shape::setTextBox(bool bTextBox)
{
mbTextBox = bTextBox;
}
void Shape::applyShapeReference( const Shape& rReferencedShape, bool bUseText )
{
SAL_INFO("oox.drawingml", "Shape::applyShapeReference: apply '" << rReferencedShape.msId << "' to '" << msId << "'");
if ( rReferencedShape.mpTextBody && bUseText )
mpTextBody = std::make_shared<TextBody>( *rReferencedShape.mpTextBody );
else
mpTextBody.reset();
maShapeProperties = rReferencedShape.maShapeProperties;
mpShapeRefLinePropPtr = std::make_shared<LineProperties>( rReferencedShape.getActualLineProperties(nullptr) );
mpShapeRefFillPropPtr = std::make_shared<FillProperties>( rReferencedShape.getActualFillProperties(nullptr, nullptr) );
mpCustomShapePropertiesPtr = std::make_shared<CustomShapeProperties>( *rReferencedShape.mpCustomShapePropertiesPtr );
mpTablePropertiesPtr = rReferencedShape.mpTablePropertiesPtr ? std::make_shared<table::TableProperties>( *rReferencedShape.mpTablePropertiesPtr ) : nullptr;
mpShapeRefEffectPropPtr = std::make_shared<EffectProperties>( rReferencedShape.getActualEffectProperties(nullptr) );
mpMasterTextListStyle = std::make_shared<TextListStyle>( *rReferencedShape.mpMasterTextListStyle );
maSize = rReferencedShape.maSize;
maPosition = rReferencedShape.maPosition;
mnRotation = rReferencedShape.mnRotation;
mbFlipH = rReferencedShape.mbFlipH;
mbFlipV = rReferencedShape.mbFlipV;
mbHidden = rReferencedShape.mbHidden;
mbLocked = rReferencedShape.mbLocked;
}
namespace {
struct ActionLockGuard
{
explicit ActionLockGuard(Reference<drawing::XShape> const& xShape)
: m_xLockable(xShape, UNO_QUERY)
{
if (m_xLockable.is()) {
m_xLockable->addActionLock();
}
}
~ActionLockGuard()
{
if (m_xLockable.is()) {
m_xLockable->removeActionLock();
}
}
private:
Reference<document::XActionLockable> m_xLockable;
};
}
// for group shapes, the following method is also adding each child
void Shape::addChildren(
XmlFilterBase& rFilterBase,
Shape& rMaster,
const Theme* pTheme,
const Reference< XShapes >& rxShapes,
ShapeIdMap* pShapeMap,
const basegfx::B2DHomMatrix& aTransformation )
{
for (auto const& child : rMaster.maChildren)
{
child->setMasterTextListStyle( mpMasterTextListStyle );
child->addShape( rFilterBase, pTheme, rxShapes, aTransformation, getFillProperties(), pShapeMap, rMaster.shared_from_this());
}
}
static SdrTextHorzAdjust lcl_convertAdjust( ParagraphAdjust eAdjust )
{
if (eAdjust == ParagraphAdjust_LEFT)
return SDRTEXTHORZADJUST_LEFT;
else if (eAdjust == ParagraphAdjust_RIGHT)
return SDRTEXTHORZADJUST_RIGHT;
else if (eAdjust == ParagraphAdjust_CENTER)
return SDRTEXTHORZADJUST_CENTER;
return SDRTEXTHORZADJUST_LEFT;
}
static TextHorizontalAdjust lcl_convertTextAdjust(ParagraphAdjust eAdjust)
{
if (eAdjust == ParagraphAdjust_LEFT)
return drawing::TextHorizontalAdjust_LEFT;
else if (eAdjust == ParagraphAdjust_RIGHT)
return drawing::TextHorizontalAdjust_RIGHT;
else
return drawing::TextHorizontalAdjust_BLOCK;
}
// LO does not interpret properties in styles belonging to the text content of a FontWork shape,
// but only those in the shape style. This method copies properties from the text content styles to
// the shape style.
static void lcl_copyCharPropsToShape(const uno::Reference<drawing::XShape>& xShape,
const TextBodyPtr& pTextBody,
const ::oox::core::XmlFilterBase& rFilter)
{
if (!xShape.is() || !pTextBody)
return;
Reference<XPropertySet> xSet(xShape, UNO_QUERY);
if (!xSet.is())
return;
// Content stretches or scales to given width and height, thus disable autogrow.
xSet->setPropertyValue(UNO_NAME_TEXT_AUTOGROWHEIGHT, uno::Any(false));
xSet->setPropertyValue(UNO_NAME_TEXT_AUTOGROWWIDTH, uno::Any(false));
// LibreOffice is not able (as of Nov 2022) to use different styles for the paragraphs or
// characters in FontWork, since that was not allowed in old binary WordArt. We use the
// properties of the first non empty paragraph for now.
const TextParagraphVector& rParagraphs = pTextBody->getParagraphs();
auto aParaIt = std::find_if_not(rParagraphs.cbegin(), rParagraphs.cend(),
[](const std::shared_ptr<TextParagraph> pParagraph) {
return pParagraph->getRuns().empty();
});
if (aParaIt != rParagraphs.cend())
{
const std::shared_ptr<TextParagraph>& pParagraph = *aParaIt;
const TextRunVector& rRuns = pParagraph->getRuns();
auto aRunIt = std::find_if_not(rRuns.cbegin(), rRuns.cend(),
[](const std::shared_ptr<TextRun> pRun)
{
return pRun->getText().isEmpty()
|| pRun->getText() == " "
|| pRun->getText().toChar() == 0xA0; // NBSP
});
if (aRunIt != rRuns.cend())
{
const std::shared_ptr<TextRun>& pRun = *aRunIt;
TextCharacterProperties& rCharProps = pRun->getTextCharacterProperties();
// set language
if (rCharProps.moLang.has_value() && !rCharProps.moLang.value().isEmpty())
{
LanguageTag aTag(rCharProps.moLang.value());
const css::lang::Locale& aLocale(aTag.getLocale(false));
switch (MsLangId::getScriptType(aTag.getLanguageType()))
{
case css::i18n::ScriptType::LATIN:
xSet->setPropertyValue(u"CharLocale"_ustr, uno::Any(aLocale));
break;
case css::i18n::ScriptType::ASIAN:
xSet->setPropertyValue(u"CharLocaleAsian"_ustr, uno::Any(aLocale));
break;
case css::i18n::ScriptType::COMPLEX:
xSet->setPropertyValue(u"CharLocaleComplex"_ustr, uno::Any(aLocale));
break;
default:;
}
}
// Font Weight, Posture, Height
if (rCharProps.moBold.has_value() && rCharProps.moBold.value())
{
xSet->setPropertyValue(UNO_NAME_CHAR_WEIGHT, uno::Any(css::awt::FontWeight::BOLD));
}
if (rCharProps.moItalic.has_value() && rCharProps.moItalic.value())
{
xSet->setPropertyValue(UNO_NAME_CHAR_POSTURE,
uno::Any(css::awt::FontSlant::FontSlant_ITALIC));
}
if (rCharProps.moHeight.has_value())
{
sal_Int32 nHeight = rCharProps.moHeight.value() / 100;
xSet->setPropertyValue(UNO_NAME_CHAR_HEIGHT, uno::Any(nHeight));
}
// Put theme fonts into shape properties
OUString sFontName;
sal_Int16 nFontPitch = 0;
sal_Int16 nFontFamily = 0;
bool bRet(false);
if (const Theme* pTheme = rFilter.getCurrentTheme())
{
// minor Latin
if (const TextFont* pFont = pTheme->resolveFont(u"+mn-lt"))
{
bRet = pFont->getFontData(sFontName, nFontPitch, nFontFamily, nullptr, rFilter);
if (bRet)
{
xSet->setPropertyValue(u"CharFontName"_ustr, uno::Any(sFontName));
xSet->setPropertyValue(u"CharFontPitch"_ustr, uno::Any(nFontPitch));
xSet->setPropertyValue(u"CharFontFamily"_ustr, uno::Any(nFontFamily));
}
}
// minor Asian
if (const TextFont* pFont = pTheme->resolveFont(u"+mn-ea"))
{
bRet = pFont->getFontData(sFontName, nFontPitch, nFontFamily, nullptr, rFilter);
if (bRet)
{
xSet->setPropertyValue(u"CharFontNameAsian"_ustr, uno::Any(sFontName));
xSet->setPropertyValue(u"CharFontPitchAsian"_ustr, uno::Any(nFontPitch));
xSet->setPropertyValue(u"CharFontFamilyAsian"_ustr, uno::Any(nFontFamily));
}
}
// minor Complex
if (const TextFont* pFont = pTheme->resolveFont(u"+mn-cs"))
{
bRet = pFont->getFontData(sFontName, nFontPitch, nFontFamily, nullptr, rFilter);
if (bRet)
{
xSet->setPropertyValue(u"CharFontNameComplex"_ustr, uno::Any(sFontName));
xSet->setPropertyValue(u"CharFontPitchComplex"_ustr, uno::Any(nFontPitch));
xSet->setPropertyValue(u"CharFontFamilyComplex"_ustr, uno::Any(nFontFamily));
}
}
}
// Replace theme fonts with formatting at run if any. ToDo: Inspect paragraph too?
// Latin
bRet = rCharProps.maLatinFont.getFontData(sFontName, nFontPitch, nFontFamily, nullptr, rFilter);
if (!bRet)
// In case there is no direct font, try to look it up as a theme reference.
bRet = rCharProps.maLatinThemeFont.getFontData(sFontName, nFontPitch, nFontFamily, nullptr,
rFilter);
if (bRet)
{
xSet->setPropertyValue(u"CharFontName"_ustr, uno::Any(sFontName));
xSet->setPropertyValue(u"CharFontPitch"_ustr, uno::Any(nFontPitch));
xSet->setPropertyValue(u"CharFontFamily"_ustr, uno::Any(nFontFamily));
}
// Asian
bRet = rCharProps.maAsianFont.getFontData(sFontName, nFontPitch, nFontFamily, nullptr, rFilter);
if (!bRet)
// In case there is no direct font, try to look it up as a theme reference.
bRet = rCharProps.maAsianThemeFont.getFontData(sFontName, nFontPitch, nFontFamily, nullptr,
rFilter);
if (bRet)
{
xSet->setPropertyValue(u"CharFontNameAsian"_ustr, uno::Any(sFontName));
xSet->setPropertyValue(u"CharFontPitchAsian"_ustr, uno::Any(nFontPitch));
xSet->setPropertyValue(u"CharFontFamilyAsian"_ustr, uno::Any(nFontFamily));
}
// Complex
bRet
= rCharProps.maComplexFont.getFontData(sFontName, nFontPitch, nFontFamily, nullptr, rFilter);
if (!bRet)
// In case there is no direct font, try to look it up as a theme reference.
bRet = rCharProps.maComplexThemeFont.getFontData(sFontName, nFontPitch, nFontFamily, nullptr,
rFilter);
if (bRet)
{
xSet->setPropertyValue(u"CharFontNameComplex"_ustr, uno::Any(sFontName));
xSet->setPropertyValue(u"CharFontPitchComplex"_ustr, uno::Any(nFontPitch));
xSet->setPropertyValue(u"CharFontFamilyComplex"_ustr, uno::Any(nFontFamily));
}
// LO uses shape properties, MS Office character properties. Copy them from char to shape.
// Outline
if (rCharProps.moTextOutlineProperties.has_value())
{
oox::drawingml::ShapePropertyMap aStrokeShapeProps(rFilter.getModelObjectHelper());
rCharProps.moTextOutlineProperties.value().pushToPropMap(
aStrokeShapeProps, rFilter.getGraphicHelper());
for (const auto& rProp : aStrokeShapeProps.makePropertyValueSequence())
{
xSet->setPropertyValue(rProp.Name, rProp.Value);
}
}
else
{
xSet->setPropertyValue(UNO_NAME_LINESTYLE, uno::Any(drawing::LineStyle_NONE));
}
// Fill
// ToDo: Replace flip and rotate constants in parameters with actual values.
// tdf#155327 If color is not explicitly set, MS Office uses scheme color 'tx1'.
oox::drawingml::ShapePropertyMap aFillShapeProps(rFilter.getModelObjectHelper());
if (!rCharProps.maFillProperties.moFillType.has_value())
rCharProps.maFillProperties.moFillType = XML_solidFill;
if (!rCharProps.maFillProperties.maFillColor.isUsed())
rCharProps.maFillProperties.maFillColor.setSchemeClr(XML_tx1);
rCharProps.maFillProperties.pushToPropMap(aFillShapeProps, rFilter.getGraphicHelper(),
/*nShapeRotation*/ 0,
/*nPhClr*/ API_RGB_TRANSPARENT,
/*aShapeSize*/ css::awt::Size(0, 0),
/*nPhClrTheme*/ -1,
/*bFlipH*/ false, /*bFlipV*/ false,
/*bIsCustomShape*/ true);
for (const auto& rProp : aFillShapeProps.makePropertyValueSequence())
{
xSet->setPropertyValue(rProp.Name, rProp.Value);
}
// ToDo: Import WordArt glow and simple shadow effects. They are available in LO.
}
// LO does not evaluate paragraph alignment in text path mode. Use text area anchor instead.
{
ParagraphAdjust eAdjust = ParagraphAdjust_LEFT;
if (pParagraph->getProperties().getParaAdjust())
eAdjust = *pParagraph->getProperties().getParaAdjust();
xSet->setPropertyValue(u"ParaAdjust"_ustr, uno::Any(eAdjust));
SdrObject* pShape = SdrObject::getSdrObjectFromXShape(xShape);
assert(pShape);
SdrTextHorzAdjust eHorzAdjust = lcl_convertAdjust(eAdjust);
pShape->SetMergedItem(SdrTextHorzAdjustItem(eHorzAdjust));
}
}
// Vertical adjustment is only meaningful for OOXML WordArt shapes of 'Follow Path' kinds. We set
// it so, that text position is approximately same as in MS Office.
const OUString sMSPresetType = pTextBody->getTextProperties().msPrst;
const OUString sFontworkType = PresetGeometryTypeNames::GetFontworkType(sMSPresetType);
SdrObject* pShape = SdrObject::getSdrObjectFromXShape(xShape);
assert(pShape);
if (sFontworkType == "fontwork-arch-up-curve" || sFontworkType == "fontwork-circle-curve")
pShape->SetMergedItem(SdrTextVertAdjustItem(SdrTextVertAdjust::SDRTEXTVERTADJUST_BOTTOM));
else if (sFontworkType == "fontwork-arch-down-curve")
pShape->SetMergedItem(SdrTextVertAdjustItem(SdrTextVertAdjust::SDRTEXTVERTADJUST_TOP));
else
pShape->SetMergedItem(SdrTextVertAdjustItem(SdrTextVertAdjust::SDRTEXTVERTADJUST_CENTER));
}
// Some helper methods for createAndInsert
namespace
{
// mirrors aTransformation at its center axis
// only valid if neither rotation or shear included
void lcl_mirrorAtCenter(basegfx::B2DHomMatrix& aTransformation, bool bFlipH, bool bFlipV)
{
if (!bFlipH && !bFlipV)
return;
basegfx::B2DPoint aCenter(0.5, 0.5);
aCenter *= aTransformation;
aTransformation.translate(-aCenter);
aTransformation.scale(bFlipH ? -1.0 : 1.0, bFlipV ? -1.0 : 1.0);
aTransformation.translate(aCenter);
return;
}
// only valid if neither rotation or shear included
void lcl_doSpecialMSOWidthHeightToggle(basegfx::B2DHomMatrix& aTransformation)
{
// The values are directly set at the matrix without any matrix multiplication.
// That way it is valid for lines too. Those have zero width or height.
const double fSx(aTransformation.get(0, 0));
const double fSy(aTransformation.get(1, 1));
const double fTx(aTransformation.get(0, 2));
const double fTy(aTransformation.get(1, 2));
aTransformation.set(0, 0, fSy);
aTransformation.set(1, 1, fSx);
aTransformation.set(0, 2, fTx + 0.5 * (fSx - fSy));
aTransformation.set(1, 2, fTy + 0.5 * (fSy - fSx));
return;
}
void lcl_RotateAtCenter(basegfx::B2DHomMatrix& aTransformation, sal_Int32 nMSORotationAngle)
{
if (nMSORotationAngle == 0)
return;
double fRad = basegfx::deg2rad<60000>(nMSORotationAngle);
basegfx::B2DPoint aCenter(0.5, 0.5);
aCenter *= aTransformation;
aTransformation.translate(-aCenter);
aTransformation.rotate(fRad);
aTransformation.translate(aCenter);
return;
}
Degree100 lcl_MSORotateAngleToAPIAngle(const sal_Int32 nMSORotationAngle)
{
// Converts a shape rotation angle from MSO to angle for API property RotateAngle
// from unit 1/60000 deg to unit 1/100 deg
Degree100 nAngle(nMSORotationAngle / 600);
// API RotateAngle has opposite direction than nMSORotationAngle, thus 'minus'.
return NormAngle36000(-nAngle);
}
}
Reference< XShape > const & Shape::createAndInsert(
::oox::core::XmlFilterBase& rFilterBase,
const OUString& rServiceName,
const Theme* pTheme,
const css::uno::Reference< css::drawing::XShapes >& rxShapes,
bool bClearText,
bool bDoNotInsertEmptyTextBody,
basegfx::B2DHomMatrix& aParentTransformation,
const FillProperties& rShapeOrParentShapeFillProps,
const oox::drawingml::ShapePtr& pParentGroupShape)
{
bool bIsEmbMedia = false;
SAL_INFO("oox.drawingml", "Shape::createAndInsert: id='" << msId << "' service='" << rServiceName << "'");
formulaimport::XmlStreamBuilder * pMathXml(nullptr);
if (mpTextBody)
{
for (auto const& it : mpTextBody->getParagraphs())
{
if (it->HasMathXml())
{
if (!mpTextBody->isEmpty() || pMathXml != nullptr)
{
SAL_WARN("oox.drawingml", "losing a Math object...");
}
else
{
pMathXml = &it->GetMathXml();
}
}
}
}
// tdf#90403 PowerPoint ignores a:ext cx and cy values of p:xfrm, and uses real table width and height
if ( mpTablePropertiesPtr && rServiceName == "com.sun.star.drawing.TableShape" )
{
maSize.Width = 0;
for (auto const& elem : mpTablePropertiesPtr->getTableGrid())
{
maSize.Width = o3tl::saturating_add(maSize.Width, static_cast<sal_Int32>(elem));
}
maSize.Height = 0;
for (auto const& elem : mpTablePropertiesPtr->getTableRows())
{
// WARN: If some rows can't fit the content, this is not the final height
maSize.Height = o3tl::saturating_add(maSize.Height, elem.getHeight());
}
}
awt::Rectangle aShapeRectHmm(
o3tl::convert(maPosition.X, o3tl::Length::emu, o3tl::Length::mm100),
o3tl::convert(maPosition.Y, o3tl::Length::emu, o3tl::Length::mm100),
o3tl::convert(maSize.Width, o3tl::Length::emu, o3tl::Length::mm100),
o3tl::convert(maSize.Height, o3tl::Length::emu, o3tl::Length::mm100));
OUString aServiceName;
if (pMathXml)
{
// convert this shape to OLE
aServiceName = u"com.sun.star.drawing.OLE2Shape"_ustr;
msServiceName = aServiceName;
meFrameType = FRAMETYPE_GENERIC; // not OLEOBJECT, no stream in package
mnSubType = 0;
}
else if (rServiceName == "com.sun.star.drawing.GraphicObjectShape" &&
mpGraphicPropertiesPtr && !mpGraphicPropertiesPtr->m_sMediaPackageURL.isEmpty())
{
aServiceName = finalizeServiceName( rFilterBase, u"com.sun.star.presentation.MediaShape"_ustr, aShapeRectHmm );
bIsEmbMedia = true;
}
else
{
aServiceName = finalizeServiceName( rFilterBase, rServiceName, aShapeRectHmm );
}
// Use custom shape instead of GraphicObjectShape if the image is cropped to
// shape. Except rectangle, which does not require further cropping
bool bIsCroppedGraphic = (aServiceName == "com.sun.star.drawing.GraphicObjectShape" &&
!mpCustomShapePropertiesPtr->representsDefaultShape());
bool bIsCustomShape = (aServiceName == "com.sun.star.drawing.CustomShape" || bIsCroppedGraphic);
bool bIsConnectorShape = (aServiceName == "com.sun.star.drawing.ConnectorShape");
// Look for 3D. Its z-rotation and extrusion color become shape properties. We consider a
// z-rotation of an image even we currently do not extrude an image to 3D-scene.
bool bBlockExtrusion = !bIsCustomShape && mp3DPropertiesPtr->mnPreset.has_value();
double fShapeRotateInclCamera = 0.0; // unit rad; same orientation as shape property RotateAngle
Color aExtrusionColor;
Scene3DHelper aScene3DHelper;
bool bHas3DEffect = aScene3DHelper.setExtrusionProperties(
mp3DPropertiesPtr, mnRotation, getCustomShapeProperties()->getExtrusionPropertyMap(),
fShapeRotateInclCamera, aExtrusionColor, bBlockExtrusion);
// Currently the other places use unit 1/60000deg and MSO shape rotate orientation.
sal_Int32 nShapeRotateInclCamera = -basegfx::rad2deg<60000>(fShapeRotateInclCamera);
bool bIs3DGraphic = aServiceName == "com.sun.star.drawing.GraphicObjectShape" && bHas3DEffect;
bIsCustomShape |= bIs3DGraphic;
// The extrusion color does not belong to the extrusion properties but is secondary color in
// the style of the shape, FillColor2 in API. The case that no extrusion color was set is handled
// further down when FillProperties and LineProperties are handled.
if (aExtrusionColor.isUsed())
{
// FillColor2 is not yet transformed to ComplexColor.
::Color aColor = aExtrusionColor.getColor(rFilterBase.getGraphicHelper());
maShapeProperties.setProperty(PROP_FillColor2, aColor);
}
if (bHas3DEffect)
{
aScene3DHelper.setLightingProperties(mp3DPropertiesPtr, fShapeRotateInclCamera,
getCustomShapeProperties()->getExtrusionPropertyMap());
oox::Scene3DHelper::setMaterialProperties(
mp3DPropertiesPtr, getCustomShapeProperties()->getExtrusionPropertyMap());
}
if (bIsCroppedGraphic || bIs3DGraphic)
{
aServiceName = "com.sun.star.drawing.CustomShape";
mpGraphicPropertiesPtr->mbIsCustomShape = true;
mpGraphicPropertiesPtr->mbIsExtruded = bIs3DGraphic;
}
bool bUseRotationTransform = ( !mbWps ||
aServiceName == "com.sun.star.drawing.LineShape" ||
aServiceName == "com.sun.star.drawing.GroupShape" ||
mbFlipH ||
mbFlipV );
basegfx::B2DHomMatrix aTransformation; // will be cumulative transformation of this object
// Special for SmartArt import. Rotate diagram's shape around object's center before sizing.
if (bUseRotationTransform && mnDiagramRotation != 0)
{
aTransformation.translate(-0.5, -0.5);
aTransformation.rotate(basegfx::deg2rad<60000>(mnDiagramRotation));
aTransformation.translate(0.5, 0.5);
}
bool bLineShape = aServiceName == "com.sun.star.drawing.LineShape";
bool bTopWriterLine = !pParentGroupShape && mbWps && bLineShape;
// Build object matrix from shape size and position; corresponds to MSO ext and off
// Only LineShape and ConnectorShape may have zero width or height.
if (bLineShape || aServiceName == "com.sun.star.drawing.ConnectorShape")
{
// For toplevel Writer lines, size is included in the point coordinates.
if (!bTopWriterLine)
{
aTransformation.scale(maSize.Width, maSize.Height);
}
}
else
{
aTransformation.scale(maSize.Width ? maSize.Width : 1.0,
maSize.Height ? maSize.Height : 1.0);
}
// Evaluate object flip. Other shapes than custom shapes have no attribute for flip but use
// negative scale. Flip in MSO is at object center.
if (!bIsCustomShape && (mbFlipH || mbFlipV))
lcl_mirrorAtCenter(aTransformation, mbFlipH, mbFlipV);
// Evaluate parent flip.
// A CustomShape has mirror not as negative scale, but as attributes.
basegfx::B2DVector aParentScale(1.0, 1.0);
basegfx::B2DVector aParentTranslate(0.0, 0.0);
double fParentRotate(0.0);
double fParentShearX(0.0);
if (pParentGroupShape)
{
aParentTransformation.decompose(aParentScale, aParentTranslate, fParentRotate, fParentShearX);
if (bIsCustomShape)
{
lcl_mirrorAtCenter(aTransformation, aParentScale.getX() < 0, aParentScale.getY() < 0);
if(aParentScale.getX() < 0)
mbFlipH = !mbFlipH;
if(aParentScale.getY() < 0)
mbFlipV = !mbFlipV;
}
}
if (maPosition.X != 0 || maPosition.Y != 0)
{
// if global position is used, add it to transformation
if (mbWps && pParentGroupShape == nullptr)
aTransformation.translate(
o3tl::convert(maPosition.X, o3tl::Length::mm100, o3tl::Length::emu),
o3tl::convert(maPosition.Y, o3tl::Length::mm100, o3tl::Length::emu));
else
aTransformation.translate(maPosition.X, maPosition.Y);
}
// Apply further parent transformations. First scale object then rotate. Other way round would
// introduce shearing.
// The attributes chExt and chOff of the group in oox file contain the values on which the size
// and position of the child is based on. If they differ from the actual size of the group as
// given in its ext and off attributes, the child has to be transformed according the new values.
if (pParentGroupShape)
{
// ToDo: A diagram in a group might need special handling because it cannot flip and only
// resize uniformly. But currently it is imported with zero size, see tdf#139575. That needs
// to be fixed beforehand.
// Scaling is done from left/top edges of the group. So these need to become coordinate axes.
aTransformation.translate(-pParentGroupShape->maChPosition.X,
-pParentGroupShape->maChPosition.Y);
// oox allows zero or missing attribute chExt. In that case the scaling factor is 1.
// Transform2DContext::onCreateContext has set maChSize to maSize for groups in oox file in
// such cases. For own made groups (e.g. diagrams) that is missing.
// The factors cumulate on the way through the parent groups, so we do not use maSize of the
// direct parent group but the cumulated value from aParentScale.
double fFactorX = 1.0;
double fFactorY = 1.0;
if (pParentGroupShape->maChSize.Width != 0)
fFactorX = aParentScale.getX() / pParentGroupShape->maChSize.Width;
if (pParentGroupShape->maChSize.Height != 0)
fFactorY = aParentScale.getY() / pParentGroupShape->maChSize.Height;
if (fFactorX != 1 || fFactorY != 1)
{
// It depends on the object rotation angle whether scaling is applied to switched
// width and height. MSO acts strange in that case (as of May 2021).
const sal_Int32 nDeg(mnRotation / 60000);
const bool bNeedsMSOWidthHeightToggle
= (nDeg >= 45 && nDeg < 135) || (nDeg >= 225 && nDeg < 315);
if (bNeedsMSOWidthHeightToggle)
lcl_doSpecialMSOWidthHeightToggle(aTransformation);
aTransformation.scale(fFactorX, fFactorY);
if (bNeedsMSOWidthHeightToggle)
{
lcl_doSpecialMSOWidthHeightToggle(aTransformation);
// In case of flip the special case needs an additional 180deg rotation.
if ((aParentScale.getX() < 0) != (aParentScale.getY() < 0))
lcl_RotateAtCenter(aTransformation, 10800000);
}
}
}
// Apply object rotation at current object center
// The flip contained in aParentScale will affect orientation of object rotation angle.
sal_Int16 nOrientation = ((aParentScale.getX() < 0) != (aParentScale.getY() < 0)) ? -1 : 1;
// ToDo: Not sure about the restrictions given by bUseRotationTransform.
if (bUseRotationTransform && nShapeRotateInclCamera != 0)
{
lcl_RotateAtCenter(aTransformation, nOrientation * nShapeRotateInclCamera);
}
if (fParentRotate != 0.0)
aTransformation.rotate(fParentRotate);
if (!aParentTranslate.equalZero())
aTransformation.translate(aParentTranslate);
aParentTransformation = aTransformation;
constexpr double fEmuToMm100 = o3tl::convert(1.0, o3tl::Length::emu, o3tl::Length::mm100);
if (!bTopWriterLine)
{
aTransformation.scale(fEmuToMm100, fEmuToMm100);
}
// OOXML flips shapes before rotating them, so the rotation needs to be inverted
if( bIsCustomShape && mbFlipH != mbFlipV )
{
basegfx::B2DVector aScale, aTranslate;
double fRotate, fShearX;
aTransformation.decompose(aScale, aTranslate, fRotate, fShearX);
if(fRotate != 0)
{
basegfx::B2DPoint aCenter(0.5, 0.5);
aCenter *= aTransformation;
aTransformation.translate( -aCenter.getX(), -aCenter.getY() );
aTransformation.rotate( fRotate * -2.0 );
aTransformation.translate( aCenter.getX(), aCenter.getY() );
}
}
// special for lineshape
if (bLineShape)
{
::basegfx::B2DPolygon aPoly;
aPoly.insert( 0, ::basegfx::B2DPoint( 0, 0 ) );
if (bTopWriterLine)
{
// No transform of individual points, everything apart from size is part of the
// transform matrix.
sal_Int32 nMM100Width = o3tl::convert(maSize.Width, o3tl::Length::emu, o3tl::Length::mm100);
sal_Int32 nMM100Height = o3tl::convert(maSize.Height, o3tl::Length::emu, o3tl::Length::mm100);
aPoly.insert(1, ::basegfx::B2DPoint(nMM100Width, nMM100Height));
}
else
{
aPoly.insert( 1, ::basegfx::B2DPoint( maSize.Width ? 1 : 0, maSize.Height ? 1 : 0 ) );
aPoly.transform( aTransformation );
}
// now creating the corresponding PolyPolygon
sal_Int32 i, nNumPoints = aPoly.count();
uno::Sequence< awt::Point > aPointSequence( nNumPoints );
awt::Point* pPoints = aPointSequence.getArray();
for( i = 0; i < nNumPoints; ++i )
{
basegfx::B2DPoint aPoint( aPoly.getB2DPoint( i ) );
// Guard against zero width or height.
if (i)
{
const basegfx::B2DPoint& rPreviousPoint = aPoly.getB2DPoint(i - 1);
if (aPoint.getX() - rPreviousPoint.getX() == 0)
aPoint.setX(aPoint.getX() + 1);
if (aPoint.getY() - rPreviousPoint.getY() == 0)
aPoint.setY(aPoint.getY() + 1);
}
pPoints[i] = awt::Point(static_cast<sal_Int32>(aPoint.getX()), static_cast<sal_Int32>(aPoint.getY()));
}
uno::Sequence< uno::Sequence< awt::Point > > aPolyPolySequence( 1 );
aPolyPolySequence.getArray()[ 0 ] = std::move(aPointSequence);
maShapeProperties.setProperty(PROP_PolyPolygon, aPolyPolySequence);
}
if ( aServiceName == "com.sun.star.drawing.ConnectorShape" )
{
::basegfx::B2DPolygon aPoly;
aPoly.insert( 0, ::basegfx::B2DPoint( 0, 0 ) );
aPoly.insert( 1, ::basegfx::B2DPoint( maSize.Width ? 1 : 0, maSize.Height ? 1 : 0 ) );
aPoly.transform( aTransformation );
basegfx::B2DPoint aStartPosition( aPoly.getB2DPoint( 0 ) );
basegfx::B2DPoint aEndPosition( aPoly.getB2DPoint( 1 ) );
awt::Point aAWTStartPosition( static_cast< sal_Int32 >( aStartPosition.getX() ), static_cast< sal_Int32 >( aStartPosition.getY() ) );
awt::Point aAWTEndPosition( static_cast< sal_Int32 >( aEndPosition.getX() ), static_cast< sal_Int32 >( aEndPosition.getY() ) );
maShapeProperties.setProperty(PROP_StartPosition, aAWTStartPosition);
maShapeProperties.setProperty(PROP_EndPosition, aAWTEndPosition);
}
else if (!bLineShape || bTopWriterLine)
{
// now set transformation for this object
HomogenMatrix3 aMatrix;
aMatrix.Line1.Column1 = aTransformation.get(0,0);
aMatrix.Line1.Column2 = aTransformation.get(0,1);
aMatrix.Line1.Column3 = aTransformation.get(0,2);
aMatrix.Line2.Column1 = aTransformation.get(1,0);
aMatrix.Line2.Column2 = aTransformation.get(1,1);
aMatrix.Line2.Column3 = aTransformation.get(1,2);
aMatrix.Line3.Column1 = 0;
aMatrix.Line3.Column2 = 0;
aMatrix.Line3.Column3 = 1;
maShapeProperties.setProperty(PROP_Transformation, aMatrix);
}
Reference< lang::XMultiServiceFactory > xServiceFact( rFilterBase.getModel(), UNO_QUERY_THROW );
if ( !mxShape.is() )
{
mxShape.set( xServiceFact->createInstance( aServiceName ), UNO_QUERY_THROW );
}
Reference< XPropertySet > xSet( mxShape, UNO_QUERY );
if (xSet.is())
{
if( !msName.isEmpty() )
{
Reference< container::XNamed > xNamed( mxShape, UNO_QUERY );
if( xNamed.is() )
xNamed->setName( msName );
}
if( !msDescription.isEmpty() )
{
xSet->setPropertyValue( u"Description"_ustr, Any( msDescription ) );
}
if (m_isDecorative)
{
xSet->setPropertyValue(u"Decorative"_ustr, Any(m_isDecorative));
}
if (!msMacro.isEmpty())
{
putPropertyToGrabBag(u"mso-sp-macro"_ustr, Any(msMacro));
}
if (!msTextLink.isEmpty())
{
putPropertyToGrabBag(u"mso-sp-textlink"_ustr, Any(msTextLink));
}
if (!mbFLocksText) // set only if "false", otherwise it will use "true" by default
{
putPropertyToGrabBag(u"mso-sp-fLocksText"_ustr, Any(mbFLocksText));
}
if (mbFPublished)
{
putPropertyToGrabBag(u"mso-sp-fPublished"_ustr, Any(mbFPublished));
}
if (!msTitle.isEmpty())
{
xSet->setPropertyValue(u"Title"_ustr, Any(msTitle));
}
// get tooltip attribute of <hlinkClick>
OUString sTooltip;
getShapeProperties().getProperty(PROP_Representation) >>= sTooltip;
if (!sTooltip.isEmpty())
putPropertyToGrabBag(u"mso-hlinkClick-tooltip"_ustr, Any(sTooltip));
// Placeholder uses the height set on the slide instead of the height from the master slide,
// if it has the "TextAutoGrowHeight" property
if (getTextBody() && mxShape->getShapeType().startsWith("com.sun.star.presentation."))
{
bool bAutoGrowHeight = getTextBody()
->getTextProperties()
.maPropertyMap.getProperty(PROP_TextAutoGrowHeight)
.get<bool>();
if (bAutoGrowHeight)
{
ppt::PowerPointImport* pPPT = dynamic_cast<ppt::PowerPointImport*>(&rFilterBase);
if (!pPPT->getActualSlidePersist()->isMasterPage())
{
sal_Int32 nUpper = 0;
sal_Int32 nLower = 0;
sal_Int32 nHeight = maSize.Height / 360;
if (getTextBody()->getTextProperties().moInsets[1].has_value()
&& getTextBody()->getTextProperties().moInsets[3].has_value())
{
nUpper = *getTextBody()->getTextProperties().moInsets[1];
nLower = *getTextBody()->getTextProperties().moInsets[3];
}
else
{
maDefaultShapeProperties.getProperty(PROP_TextUpperDistance) >>= nUpper;
maDefaultShapeProperties.getProperty(PROP_TextLowerDistance) >>= nLower;
}
nHeight -= (nUpper + nLower);
mxShape->setSize(awt::Size(0, nHeight));
}
}
else // the placeholder uses the height set on the master slide
mxShape->setSize(awt::Size(0, 0));
}
if (aServiceName != "com.sun.star.text.TextFrame")
rxShapes->add( mxShape );
if ( mbHidden || mbHiddenMasterShape )
{
SAL_INFO("oox.drawingml", "Shape::createAndInsert: invisible shape with id='" << msId << "'");
xSet->setPropertyValue( u"Visible"_ustr, Any( false ) );
// In Excel hidden means not printed, let's use visibility for now until that's handled separately
xSet->setPropertyValue( u"Printable"_ustr, Any( false ) );
}
if (mbLocked)
{
xSet->setPropertyValue(u"MoveProtect"_ustr, Any(true));
xSet->setPropertyValue(u"SizeProtect"_ustr, Any(true));
}
ActionLockGuard const alg(mxShape);
// sj: removing default text of placeholder objects such as SlideNumberShape or HeaderShape
if ( bClearText )
{
uno::Reference< text::XText > xText( mxShape, uno::UNO_QUERY );
if ( xText.is() )
{
xText->setString( u""_ustr );
}
}
if (pMathXml)
{
// the "EmbeddedObject" property is read-only, so we have to create
// the shape first, and it can be read only after the shape is
// inserted into the document, so delay the actual import until here
SvGlobalName name(SO3_SM_CLASSID);
xSet->setPropertyValue(u"CLSID"_ustr, uno::Any(name.GetHexName()));
uno::Reference<embed::XEmbeddedObject> const xObj(
xSet->getPropertyValue(u"EmbeddedObject"_ustr), uno::UNO_QUERY);
if (xObj.is())
{
uno::Reference<uno::XInterface> const xMathModel(xObj->getComponent());
oox::FormulaImExportBase *const pMagic(
dynamic_cast<oox::FormulaImExportBase*>(xMathModel.get()));
assert(pMagic);
pMagic->readFormulaOoxml(*pMathXml);
}
}
const GraphicHelper& rGraphicHelper = rFilterBase.getGraphicHelper();
::Color nLinePhClr(ColorTransparency, 0xffffffff);
::Color nFillPhClr(ColorTransparency, 0xffffffff);
sal_Int16 nFillPhClrTheme = -1;
sal_Int16 nLinePhClrTheme = -1;
// TODO: use ph color when applying effect properties
//sal_Int32 nEffectPhClr = -1;
// dmapper needs the original rotation angle for calculating square wrap. This angle is not
// available as property there, so store it in InteropGrabBag.
putPropertyToGrabBag(u"mso-rotation-angle"_ustr, Any(mnRotation));
if( pTheme )
{
if( const ShapeStyleRef* pLineRef = getShapeStyleRef( XML_lnRef ) )
{
LineProperties aLineProperties;
aLineProperties.maLineFill.moFillType = XML_noFill;
if( const LineProperties* pLineProps = pTheme->getLineStyle( pLineRef->mnThemedIdx ) )
aLineProperties.assignUsed( *pLineProps );
nLinePhClr = pLineRef->maPhClr.getColor( rGraphicHelper );
nLinePhClrTheme = pLineRef->maPhClr.getSchemeColorIndex();
// Store style-related properties to InteropGrabBag to be able to export them back
uno::Sequence<beans::PropertyValue> aProperties = comphelper::InitPropertySequence(
{
{"SchemeClr", uno::Any(pLineRef->maPhClr.getSchemeColorName())},
{"Idx", uno::Any(pLineRef->mnThemedIdx)},
{"Color", uno::Any(nLinePhClr)},
{"LineStyle", uno::Any(aLineProperties.getLineStyle())},
{"LineCap", uno::Any(aLineProperties.getLineCap())},
{"LineJoint", uno::Any(aLineProperties.getLineJoint())},
{"LineWidth", uno::Any(aLineProperties.getLineWidth())},
{"Transformations", uno::Any(pLineRef->maPhClr.getTransformations())}
});
putPropertyToGrabBag( u"StyleLnRef"_ustr, Any( aProperties ) );
}
if( const ShapeStyleRef* pFillRef = getShapeStyleRef( XML_fillRef ) )
{
if (!getFillProperties().moUseBgFill.value_or(false))
{
nFillPhClr = pFillRef->maPhClr.getColor(rGraphicHelper);
nFillPhClrTheme = pFillRef->maPhClr.getSchemeColorIndex();
}
OUString sColorScheme = pFillRef->maPhClr.getSchemeColorName();
if( !sColorScheme.isEmpty() )
{
uno::Sequence<beans::PropertyValue> aProperties = comphelper::InitPropertySequence(
{
{"SchemeClr", uno::Any(sColorScheme)},
{"Idx", uno::Any(pFillRef->mnThemedIdx)},
{"Color", uno::Any(nFillPhClr)},
{"Transformations", uno::Any(pFillRef->maPhClr.getTransformations())}
});
putPropertyToGrabBag( u"StyleFillRef"_ustr, Any( aProperties ) );
}
}
if( const ShapeStyleRef* pEffectRef = getShapeStyleRef( XML_effectRef ) )
{
// TODO: use ph color when applying effect properties
// nEffectPhClr = pEffectRef->maPhClr.getColor( rGraphicHelper );
// Store style-related properties to InteropGrabBag to be able to export them back
uno::Sequence<beans::PropertyValue> aProperties = comphelper::InitPropertySequence(
{
{"SchemeClr", uno::Any(pEffectRef->maPhClr.getSchemeColorName())},
{"Idx", uno::Any(pEffectRef->mnThemedIdx)},
{"Transformations", uno::Any(pEffectRef->maPhClr.getTransformations())}
});
putPropertyToGrabBag( u"StyleEffectRef"_ustr, Any( aProperties ) );
}
}
ShapePropertyMap aShapeProps( rFilterBase.getModelObjectHelper() );
// add properties from textbody to shape properties
if( mpTextBody )
{
// tdf#67347: In case of Stacked, PP calculates in the vertical direction with the
// horizontal alignment.
// In LO, we simulate it by setting TextVerticalAdjust based on the ParagraphAdjust
// of the 1. paragraph
// It is not perfect, because we have 1 TextVerticalAdjust / 1 shape, and it
// does not support justified, while we can have many ParagraphAdjust / 1 shape
// (if the shape have more paragraphs)
if (mpTextBody->getTextProperties().maPropertyMap.hasProperty(PROP_WritingMode)
&& mpTextBody->getTextProperties().maPropertyMap.getProperty(PROP_WritingMode)
== uno::Any(text::WritingMode2::STACKED)
&& mpTextBody->getParagraphs().size() > 0
&& aServiceName != "com.sun.star.drawing.GroupShape")
{
std::optional<css::style::ParagraphAdjust>& oParaAdjust
= mpTextBody->getParagraphs()[0]->getProperties().getParaAdjust();
if (oParaAdjust)
{
switch (*oParaAdjust)
{
case ParagraphAdjust::ParagraphAdjust_LEFT:
mpTextBody->getTextProperties().meVA
= TextVerticalAdjust::TextVerticalAdjust_TOP;
break;
case ParagraphAdjust::ParagraphAdjust_CENTER:
mpTextBody->getTextProperties().meVA
= TextVerticalAdjust::TextVerticalAdjust_CENTER;
break;
case ParagraphAdjust::ParagraphAdjust_RIGHT:
mpTextBody->getTextProperties().meVA
= TextVerticalAdjust::TextVerticalAdjust_BOTTOM;
break;
default:
break;
}
mpTextBody->getTextProperties().maPropertyMap.setProperty(
PROP_TextVerticalAdjust, mpTextBody->getTextProperties().meVA);
}
}
// tdf#162571: In case of shapes with TextAutoGrowHeight, PP calculates/grow the
// shapes size in edit mode (typing) based on the text horizontal alignment.
// In LO, we simulate it by setting TextHorizontalAdjust based on the ParagraphAdjust
// of the 1. paragraph
// It is not perfect, because we have 1 TextHorizontalAdjust / 1 shape,
// while we can have many ParagraphAdjust / 1 shape
if (!mpTextBody->getTextProperties().maPropertyMap.hasProperty(PROP_WritingMode)
&& mpTextBody->getParagraphs().size() > 0)
{
std::optional<css::style::ParagraphAdjust>& oParaAdjust
= mpTextBody->getParagraphs()[0]->getProperties().getParaAdjust();
bool bAutoHeight = false;
Reference< XPropertySetInfo > xSetInfo(xSet->getPropertySetInfo());
const OUString& rPropName = PropertyMap::getPropertyName(PROP_TextAutoGrowHeight);
if (xSetInfo.is() && xSetInfo->hasPropertyByName(rPropName))
{
uno::Any aTextAutoGrowHeight = xSet->getPropertyValue(u"TextAutoGrowHeight"_ustr);
aTextAutoGrowHeight >>= bAutoHeight;
}
if (bAutoHeight && nShapeRotateInclCamera == 0)
{
mpTextBody->getTextProperties().maPropertyMap.setProperty(
PROP_TextHorizontalAdjust, lcl_convertTextAdjust(
oParaAdjust ? *oParaAdjust : ParagraphAdjust_LEFT));
}
}
mpTextBody->getTextProperties().pushTextDistances(Size(aShapeRectHmm.Width, aShapeRectHmm.Height));
aShapeProps.assignUsed( mpTextBody->getTextProperties().maPropertyMap );
// Push char properties as well - specifically useful when this is a placeholder
if( mpMasterTextListStyle && mpMasterTextListStyle->getListStyle()[0].getTextCharacterProperties().moHeight.has_value() )
aShapeProps.setProperty(PROP_CharHeight, GetFontHeight( mpMasterTextListStyle->getListStyle()[0].getTextCharacterProperties().moHeight.value() ));
}
// applying properties
aShapeProps.assignUsed( getShapeProperties() );
aShapeProps.assignUsed( maDefaultShapeProperties );
if(nShapeRotateInclCamera != 0 && bIsCustomShape)
aShapeProps.setProperty(PROP_RotateAngle,
sal_Int32(lcl_MSORotateAngleToAPIAngle(nShapeRotateInclCamera)));
if( bIsEmbMedia ||
bIsCustomShape ||
aServiceName == "com.sun.star.drawing.GraphicObjectShape" ||
aServiceName == "com.sun.star.drawing.OLE2Shape")
{
mpGraphicPropertiesPtr->pushToPropMap( aShapeProps, rGraphicHelper, mbFlipH, mbFlipV );
}
if ( mpTablePropertiesPtr && aServiceName == "com.sun.star.drawing.TableShape" )
{
mpTablePropertiesPtr->pushToPropSet( rFilterBase, xSet, mpMasterTextListStyle );
if ( auto* pTableShape = dynamic_cast<sdr::table::SdrTableObj*>(SdrObject::getSdrObjectFromXShape(mxShape)) )
{
// Disable layouting until table height is expanded to fit the content
pTableShape->SetSkipChangeLayout(true);
}
}
FillProperties aFillProperties = getActualFillProperties(pTheme, &rShapeOrParentShapeFillProps);
if (getFillProperties().moFillType.has_value() && getFillProperties().moFillType.value() == XML_grpFill)
getFillProperties().assignUsed(aFillProperties);
if(!bIsCroppedGraphic && !bIs3DGraphic)
aFillProperties.pushToPropMap(aShapeProps, rGraphicHelper, mnRotation, nFillPhClr,
css::awt::Size(aShapeRectHmm.Width, aShapeRectHmm.Height),
nFillPhClrTheme, mbFlipH, mbFlipV, bIsCustomShape);
LineProperties aLineProperties = getActualLineProperties(pTheme);
aLineProperties.pushToPropMap( aShapeProps, rGraphicHelper, nLinePhClr, nLinePhClrTheme);
EffectProperties aEffectProperties = getActualEffectProperties(pTheme);
// TODO: use ph color when applying effect properties
aEffectProperties.pushToPropMap( aShapeProps, rGraphicHelper );
// applying autogrowheight property before setting shape size, because
// the shape size might be changed if currently autogrowheight is true
// we must also check that the PropertySet supports the property.
Reference< XPropertySetInfo > xSetInfo( xSet->getPropertySetInfo() );
const OUString& rPropName = PropertyMap::getPropertyName( PROP_TextAutoGrowHeight );
if( xSetInfo.is() && xSetInfo->hasPropertyByName( rPropName ) )
if( aShapeProps.hasProperty( PROP_TextAutoGrowHeight ) )
xSet->setPropertyValue( rPropName, Any( false ) );
// For extruded shapes, MSO uses the line color if no extrusion color is specified. LO uses
// fill color in 'automatic' case. Thus we set extrusion color explicitly.
if (bHas3DEffect && !aExtrusionColor.isUsed())
{
const OUString& rFillColor2PropName = PropertyMap::getPropertyName(PROP_FillColor2);
if (xSetInfo.is() && xSetInfo->hasPropertyByName(rFillColor2PropName))
{
Color aComplexColor;
if (aLineProperties.maLineFill.moFillType.has_value()
&& aLineProperties.maLineFill.moFillType.value() != XML_noFill)
aComplexColor = aLineProperties.maLineFill.getBestSolidColor();
else if (aFillProperties.moFillType.has_value()
&& aFillProperties.moFillType.value() != XML_noFill)
aComplexColor = aFillProperties.getBestSolidColor();
if (aComplexColor.isUsed())
{
const ::Color aSimpleColor = aComplexColor.getColor(rFilterBase.getGraphicHelper());
xSet->setPropertyValue(rFillColor2PropName, Any(aSimpleColor));
}
}
}
// do not set properties at a group shape (this causes
// assertions from svx) ...
if( aServiceName != "com.sun.star.drawing.GroupShape" )
{
if (aServiceName == "com.sun.star.text.TextFrame")
{
if (mpCustomShapePropertiesPtr && mpCustomShapePropertiesPtr->getShapeTypeOverride())
{
uno::Reference<beans::XPropertySet> propertySet (mxShape, uno::UNO_QUERY);
uno::Sequence<beans::PropertyValue> aGrabBag;
propertySet->getPropertyValue(u"FrameInteropGrabBag"_ustr) >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length+1);
auto pGrabBag = aGrabBag.getArray();
pGrabBag[length].Name = "mso-orig-shape-type";
pGrabBag[length].Value <<= mpCustomShapePropertiesPtr->getShapePresetTypeName();
propertySet->setPropertyValue(u"FrameInteropGrabBag"_ustr,uno::Any(aGrabBag));
}
//If the text box has links then save the link information so that
//it can be accessed in DomainMapper_Impl.cxx while chaining the text frames.
if (isLinkedTxbx())
{
uno::Reference<beans::XPropertySet> propertySet (mxShape, uno::UNO_QUERY);
uno::Sequence<beans::PropertyValue> aGrabBag;
propertySet->getPropertyValue(u"FrameInteropGrabBag"_ustr) >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length + 3 );
auto pGrabBag = aGrabBag.getArray();
pGrabBag[length].Name = "TxbxHasLink";
pGrabBag[length].Value <<= isLinkedTxbx();
pGrabBag[length + 1 ].Name = "Txbx-Id";
pGrabBag[length + 1 ].Value <<= getLinkedTxbxAttributes().id;
pGrabBag[length + 2 ].Name = "Txbx-Seq";
pGrabBag[length + 2 ].Value <<= getLinkedTxbxAttributes().seq;
propertySet->setPropertyValue(u"FrameInteropGrabBag"_ustr,uno::Any(aGrabBag));
}
// TextFrames have BackColor, not FillColor
if (aShapeProps.hasProperty(PROP_FillColor))
{
aShapeProps.setAnyProperty(PROP_BackColor, aShapeProps.getProperty(PROP_FillColor));
aShapeProps.erase(PROP_FillColor);
}
// TextFrames have BackColorTransparency, not FillTransparence
if (aShapeProps.hasProperty(PROP_FillTransparence))
{
aShapeProps.setAnyProperty(PROP_BackColorTransparency, aShapeProps.getProperty(PROP_FillTransparence));
aShapeProps.erase(PROP_FillTransparence);
}
// TextFrames have BackGraphic, not FillBitmap
if (aShapeProps.hasProperty(PROP_FillBitmap))
{
aShapeProps.setAnyProperty(PROP_BackGraphic, aShapeProps.getProperty(PROP_FillBitmap));
aShapeProps.erase(PROP_FillBitmap);
}
if (aShapeProps.hasProperty(PROP_FillBitmapName))
{
uno::Any aAny = aShapeProps.getProperty(PROP_FillBitmapName);
OUString aFillBitmapName = aAny.get<OUString>();
uno::Reference<awt::XBitmap> xBitmap = rFilterBase.getModelObjectHelper().getFillBitmap(aFillBitmapName);
uno::Reference<graphic::XGraphic> xGraphic(xBitmap, uno::UNO_QUERY);
aShapeProps.setProperty(PROP_BackGraphic, xGraphic);
// aShapeProps.erase(PROP_FillBitmapName); // Maybe, leave the name as well
}
// And no LineColor property; individual borders can have colors
if (aShapeProps.hasProperty(PROP_LineColor))
{
uno::Reference<beans::XPropertySet> xPropertySet(mxShape, uno::UNO_QUERY);
static const sal_Int32 aBorders[] =
{
PROP_TopBorder, PROP_LeftBorder, PROP_BottomBorder, PROP_RightBorder
};
for (sal_Int32 nBorder : aBorders)
{
css::table::BorderLine2 aBorderLine = xPropertySet->getPropertyValue(PropertyMap::getPropertyName(nBorder)).get<css::table::BorderLine2>();
aBorderLine.Color = aShapeProps.getProperty(PROP_LineColor).get<sal_Int32>();
if (aLineProperties.moLineWidth.has_value())
aBorderLine.LineWidth = convertEmuToHmm(aLineProperties.moLineWidth.value());
aShapeProps.setProperty(nBorder, aBorderLine);
}
aShapeProps.erase(PROP_LineColor);
}
if(mnRotation)
{
uno::Reference<beans::XPropertySet> xPropertySet(mxShape, uno::UNO_QUERY);
static constexpr OUString aGrabBagPropName = u"FrameInteropGrabBag"_ustr;
uno::Sequence<beans::PropertyValue> aGrabBag;
xPropertySet->getPropertyValue(aGrabBagPropName) >>= aGrabBag;
beans::PropertyValue aPair(comphelper::makePropertyValue(u"mso-rotation-angle"_ustr,
mnRotation));
if (aGrabBag.hasElements())
{
sal_Int32 nLength = aGrabBag.getLength();
aGrabBag.realloc(nLength + 1);
aGrabBag.getArray()[nLength] = std::move(aPair);
}
else
{
aGrabBag = { std::move(aPair) };
}
xPropertySet->setPropertyValue(aGrabBagPropName, uno::Any(aGrabBag));
}
// TextFrames have ShadowFormat, not individual shadow properties.
std::optional<sal_Int32> oShadowDistance;
if (aShapeProps.hasProperty(PROP_ShadowXDistance))
{
oShadowDistance = aShapeProps.getProperty(PROP_ShadowXDistance).get<sal_Int32>();
aShapeProps.erase(PROP_ShadowXDistance);
}
if (aShapeProps.hasProperty(PROP_ShadowYDistance))
{
// There is a single 'dist' attribute, so no need to count the avg of x and y.
aShapeProps.erase(PROP_ShadowYDistance);
}
std::optional<sal_Int32> oShadowColor;
if (aShapeProps.hasProperty(PROP_ShadowColor))
{
oShadowColor = aShapeProps.getProperty(PROP_ShadowColor).get<sal_Int32>();
aShapeProps.erase(PROP_ShadowColor);
}
if (aShapeProps.hasProperty(PROP_Shadow))
aShapeProps.erase(PROP_Shadow);
if (oShadowDistance || oShadowColor || aEffectProperties.maShadow.moShadowDir.has_value())
{
css::table::ShadowFormat aFormat;
if (oShadowColor)
aFormat.Color = *oShadowColor;
if (aEffectProperties.maShadow.moShadowDir.has_value())
{
css::table::ShadowLocation nLocation = css::table::ShadowLocation_NONE;
switch (aEffectProperties.maShadow.moShadowDir.value())
{
case 13500000:
nLocation = css::table::ShadowLocation_TOP_LEFT;
break;
case 18900000:
nLocation = css::table::ShadowLocation_TOP_RIGHT;
break;
case 8100000:
nLocation = css::table::ShadowLocation_BOTTOM_LEFT;
break;
case 2700000:
nLocation = css::table::ShadowLocation_BOTTOM_RIGHT;
break;
}
aFormat.Location = nLocation;
}
aFormat.ShadowWidth = *oShadowDistance;
aShapeProps.setProperty(PROP_ShadowFormat, aFormat);
}
}
else if (mbTextBox)
{
// This introduces a TextBox in a shape in Writer. ToDo: Can we restrict it to cases
// where the TextBox edit engine is really needed? tdf#82627
aShapeProps.setProperty(PROP_TextBox, true);
}
if (aServiceName != "com.sun.star.text.TextFrame" && isLinkedTxbx())
{
uno::Reference<beans::XPropertySet> propertySet (mxShape, uno::UNO_QUERY);
uno::Sequence<beans::PropertyValue> aGrabBag;
propertySet->getPropertyValue(u"InteropGrabBag"_ustr) >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length + 3 );
auto pGrabBag = aGrabBag.getArray();
pGrabBag[length].Name = "TxbxHasLink";
pGrabBag[length].Value <<= isLinkedTxbx();
pGrabBag[length + 1 ].Name = "Txbx-Id";
pGrabBag[length + 1 ].Value <<= getLinkedTxbxAttributes().id;
pGrabBag[length + 2 ].Name = "Txbx-Seq";
pGrabBag[length + 2 ].Value <<= getLinkedTxbxAttributes().seq;
propertySet->setPropertyValue(u"InteropGrabBag"_ustr,uno::Any(aGrabBag));
}
PropertySet( xSet ).setProperties( aShapeProps );
if (mpTablePropertiesPtr && aServiceName == "com.sun.star.drawing.TableShape")
{
// Powerpoint exports desired row heights (i.e. what user attempted to set it as, not how it appears visually)
// Expand table height if there are rows that can't fit the content
if (auto* pTableShape = dynamic_cast<sdr::table::SdrTableObj*>(SdrObject::getSdrObjectFromXShape(mxShape)))
{
tools::Rectangle aArea{};
pTableShape->LayoutTableHeight(aArea);
sal_Int32 nCorrectedHeight = aArea.GetHeight();
const auto aShapeSize = mxShape->getSize();
if( nCorrectedHeight > aShapeSize.Height )
mxShape->setSize( {aShapeSize.Width, nCorrectedHeight} );
pTableShape->SetSkipChangeLayout(false);
}
}
if (mbLockedCanvas)
{
putPropertyToGrabBag( u"LockedCanvas"_ustr, Any( true ) );
if (aServiceName == "com.sun.star.drawing.LineShape")
{
// It seems the position and size for lines inside a locked canvas is absolute.
mxShape->setPosition(awt::Point(aShapeRectHmm.X, aShapeRectHmm.Y));
mxShape->setSize(awt::Size(aShapeRectHmm.Width, aShapeRectHmm.Height));
}
}
if (mbWordprocessingCanvas)
{
putPropertyToGrabBag(u"WordprocessingCanvas"_ustr, Any(true));
}
// Store original fill and line colors of the shape and the theme color name to InteropGrabBag
std::vector<beans::PropertyValue> aProperties
{
comphelper::makePropertyValue(u"EmuLineWidth"_ustr, aLineProperties.moLineWidth.value_or(0)),
comphelper::makePropertyValue(u"OriginalSolidFillClr"_ustr, aShapeProps.getProperty(PROP_FillColor)),
comphelper::makePropertyValue(u"OriginalLnSolidFillClr"_ustr, aShapeProps.getProperty(PROP_LineColor))
};
OUString sColorFillScheme = aFillProperties.maFillColor.getSchemeColorName();
if( !aFillProperties.maFillColor.isPlaceHolder() && !sColorFillScheme.isEmpty() )
{
aProperties.push_back(comphelper::makePropertyValue(u"SpPrSolidFillSchemeClr"_ustr, sColorFillScheme));
aProperties.push_back(comphelper::makePropertyValue(u"SpPrSolidFillSchemeClrTransformations"_ustr, aFillProperties.maFillColor.getTransformations()));
}
OUString sLnColorFillScheme = aLineProperties.maLineFill.maFillColor.getSchemeColorName();
if( !aLineProperties.maLineFill.maFillColor.isPlaceHolder() && !sLnColorFillScheme.isEmpty() )
{
aProperties.push_back(comphelper::makePropertyValue(u"SpPrLnSolidFillSchemeClr"_ustr, sLnColorFillScheme));
auto aResolvedSchemeClr = aLineProperties.maLineFill.maFillColor;
aResolvedSchemeClr.clearTransformations();
aProperties.push_back(comphelper::makePropertyValue(u"SpPrLnSolidFillResolvedSchemeClr"_ustr, aResolvedSchemeClr.getColor(rGraphicHelper, nFillPhClr)));
aProperties.push_back(comphelper::makePropertyValue(u"SpPrLnSolidFillSchemeClrTransformations"_ustr, aLineProperties.maLineFill.maFillColor.getTransformations()));
}
putPropertiesToGrabBag(comphelper::containerToSequence(aProperties));
// Store original gradient fill of the shape to InteropGrabBag
// LibreOffice doesn't support all the kinds of gradient so we save its complete definition
if( aShapeProps.hasProperty( PROP_FillGradient ) )
{
std::vector<beans::PropertyValue> aGradientStops;
size_t i = 0;
for( const auto& [rPos, rColor] : aFillProperties.maGradientProps.maGradientStops )
{ // for each stop in the gradient definition:
// save position
std::vector<beans::PropertyValue> aGradientStop
{
comphelper::makePropertyValue(u"Pos"_ustr, rPos)
};
OUString sStopColorScheme = rColor.getSchemeColorName();
if( sStopColorScheme.isEmpty() )
{
// save RGB color
aGradientStop.push_back(comphelper::makePropertyValue(u"RgbClr"_ustr, rColor.getColor(rGraphicHelper, nFillPhClr)));
// in the case of a RGB color, transformations are already applied to
// the color with the exception of alpha transformations. We only need
// to keep the transparency value to calculate the alpha value later.
if( rColor.hasTransparency() )
aGradientStop.push_back(comphelper::makePropertyValue(u"Transparency"_ustr, rColor.getTransparency()));
}
else
{
// save color with scheme name
aGradientStop.push_back(comphelper::makePropertyValue(u"SchemeClr"_ustr, sStopColorScheme));
// save all color transformations
aGradientStop.push_back(comphelper::makePropertyValue(u"Transformations"_ustr, rColor.getTransformations()));
}
aGradientStops.push_back(comphelper::makePropertyValue(OUString::number(i), comphelper::containerToSequence(aGradientStop)));
++i;
}
// If getFillProperties.moFillType is unused that means gradient is defined by a theme
// which is already saved into StyleFillRef property, so no need to save the explicit values too
if( getFillProperties().moFillType.has_value() )
putPropertyToGrabBag( u"GradFillDefinition"_ustr, uno::Any(comphelper::containerToSequence(aGradientStops)));
putPropertyToGrabBag( u"OriginalGradFill"_ustr, aShapeProps.getProperty(PROP_FillGradient) );
}
// store unsupported effect attributes in the grab bag
if (!aEffectProperties.m_Effects.empty())
{
std::vector<beans::PropertyValue> aEffects;
for (auto const& it : aEffectProperties.m_Effects)
{
PropertyValue aEffect = it->getEffect();
if( !aEffect.Name.isEmpty() )
{
std::vector<beans::PropertyValue> aEffectsGrabBag
{
comphelper::makePropertyValue(u"Attribs"_ustr, aEffect.Value)
};
Color& aColor( it->moColor );
OUString sColorScheme = aColor.getSchemeColorName();
if( sColorScheme.isEmpty() )
{
// RGB color and transparency value
aEffectsGrabBag.push_back(comphelper::makePropertyValue(u"RgbClr"_ustr, aColor.getColor(rGraphicHelper, nFillPhClr)));
aEffectsGrabBag.push_back(comphelper::makePropertyValue(u"RgbClrTransparency"_ustr, aColor.getTransparency()));
}
else
{
// scheme color with name and transformations
aEffectsGrabBag.push_back(comphelper::makePropertyValue(u"SchemeClr"_ustr, sColorScheme));
aEffectsGrabBag.push_back(comphelper::makePropertyValue(u"SchemeClrTransformations"_ustr, aColor.getTransformations()));
}
aEffects.push_back(comphelper::makePropertyValue(aEffect.Name, comphelper::containerToSequence(aEffectsGrabBag)));
}
}
putPropertyToGrabBag(u"EffectProperties"_ustr, uno::Any(comphelper::containerToSequence(aEffects)));
}
// add 3D effects if any to GrabBag. They are still used in export.
Sequence< PropertyValue > aCamera3DEffects = get3DProperties().getCameraAttributes();
Sequence< PropertyValue > aLightRig3DEffects = get3DProperties().getLightRigAttributes();
Sequence< PropertyValue > aShape3DEffects = get3DProperties().getShape3DAttributes( rGraphicHelper, nFillPhClr );
if( aCamera3DEffects.hasElements() || aLightRig3DEffects.hasElements() || aShape3DEffects.hasElements() )
{
uno::Sequence<beans::PropertyValue> a3DEffectsGrabBag = comphelper::InitPropertySequence(
{
{"Camera", uno::Any(aCamera3DEffects)},
{"LightRig", uno::Any(aLightRig3DEffects)},
{"Shape3D", uno::Any(aShape3DEffects)}
});
putPropertyToGrabBag( u"3DEffectProperties"_ustr, Any( a3DEffectsGrabBag ) );
}
if( bIsCustomShape && getTextBody())
{
Sequence< PropertyValue > aTextCamera3DEffects = getTextBody()->get3DProperties().getCameraAttributes();
Sequence< PropertyValue > aTextLightRig3DEffects = getTextBody()->get3DProperties().getLightRigAttributes();
Sequence< PropertyValue > aTextShape3DEffects = getTextBody()->get3DProperties().getShape3DAttributes( rGraphicHelper, nFillPhClr );
if( aTextCamera3DEffects.hasElements() || aTextLightRig3DEffects.hasElements() || aTextShape3DEffects.hasElements() )
{
uno::Sequence<beans::PropertyValue> aText3DEffectsGrabBag = comphelper::InitPropertySequence(
{
{"Camera", uno::Any(aTextCamera3DEffects)},
{"LightRig", uno::Any(aTextLightRig3DEffects)},
{"Shape3D", uno::Any(aTextShape3DEffects)}
});
putPropertyToGrabBag( u"Text3DEffectProperties"_ustr, Any( aText3DEffectsGrabBag ) );
}
}
// store bitmap artistic effects in the grab bag
if( !mpGraphicPropertiesPtr->maBlipProps.maEffect.isEmpty() )
putPropertyToGrabBag( u"ArtisticEffectProperties"_ustr,
Any( mpGraphicPropertiesPtr->maBlipProps.maEffect.getEffect() ) );
}
else if( mbLockedCanvas )
{
//If we have aServiceName as "com.sun.star.drawing.GroupShape" and lockedCanvas
putPropertyToGrabBag( u"LockedCanvas"_ustr, Any( true ) );
}
else if (mbWordprocessingCanvas)
{
putPropertyToGrabBag(u"WordprocessingCanvas"_ustr, Any(true));
putPropertyToGrabBag(u"mso-edit-as"_ustr, Any(u"canvas"_ustr)); // for export VML Fallback
}
// These can have a custom geometry, so position should be set here,
// after creation but before custom shape handling, using the position
// we got from the caller.
if (mbWps && aServiceName == "com.sun.star.drawing.LineShape" && !pParentGroupShape)
mxShape->setPosition(maPosition);
if (bIsConnectorShape)
{
msConnectorName = mpCustomShapePropertiesPtr->getShapePresetTypeName();
const auto& aAdjustmentList = mpCustomShapePropertiesPtr->getAdjustmentGuideList();
for (size_t i = 0; i < aAdjustmentList.size(); i++)
maConnectorAdjustmentList.push_back(aAdjustmentList[i].maFormula);
sal_Int32 nType = mpCustomShapePropertiesPtr->getShapePresetType();
switch (nType)
{
case XML_line:
case XML_straightConnector1:
xSet->setPropertyValue(u"EdgeKind"_ustr, Any(ConnectorType_LINE));
break;
case XML_bentConnector2:
case XML_bentConnector3:
case XML_bentConnector4:
case XML_bentConnector5:
xSet->setPropertyValue(u"EdgeKind"_ustr, Any(ConnectorType_STANDARD));
break;
case XML_curvedConnector2:
case XML_curvedConnector3:
case XML_curvedConnector4:
case XML_curvedConnector5:
xSet->setPropertyValue(u"EdgeKind"_ustr, Any(ConnectorType_CURVE));
break;
default:
break;
}
}
if( bIsCustomShape )
{
if ( mbFlipH )
mpCustomShapePropertiesPtr->setMirroredX( true );
if ( mbFlipV )
mpCustomShapePropertiesPtr->setMirroredY( true );
if( getTextBody() )
{
sal_Int32 nTextCameraZRotation = getTextBody()->get3DProperties().maCameraRotation.mnRevolution.value_or(0);
mpCustomShapePropertiesPtr->setTextCameraZRotateAngle( nTextCameraZRotation / 60000 );
// TextPreRotateAngle. Text rotates inside the text area. Might be used for diagram layout 'upr' and 'grav'.
sal_Int32 nTextPreRotateAngle = static_cast< sal_Int32 >( getTextBody()->getTextProperties().moTextPreRotation.value_or( 0 ) );
nTextPreRotateAngle -= mnDiagramRotation; // Use of mnDiagramRotation is unclear. It seems to be always 0 here.
// TextRotateAngle. The text area rotates.
sal_Int32 nTextAreaRotateAngle = getTextBody()->getTextProperties().moTextAreaRotation.value_or(0);
if (getTextBody()->getTextProperties().moUpright)
{
// When upright is set, any text area transformation and shape rotation is ignored
// in MS Office. To simulate this behaviour, we rotate the text area into the
// opposite direction of the shape rotation by as much as the shape was rotated
// and so compensate the shape rotation, which is added in rendering.
nTextAreaRotateAngle = -mnRotation;
// If 45° <= shape rotation < 135° or 225° <= shape rotation < 315°,
// then MS Office adds an additional 90° rotation to the text area.
const sal_Int32 nDeg(mnRotation / 60000);
if ((nDeg >= 45 && nDeg < 135) || (nDeg >= 225 && nDeg < 315))
{
nTextAreaRotateAngle += 5400000;
nTextPreRotateAngle -= 5400000; // compensate the additional text area rotation
}
putPropertyToGrabBag(u"Upright"_ustr, Any(true));
}
/* OOX measures text rotation clockwise in 1/60000th degrees,
relative to the containing shape. set*Angle wants degrees counter-clockwise. */
mpCustomShapePropertiesPtr->setTextPreRotateAngle(-nTextPreRotateAngle / 60000);
if (nTextAreaRotateAngle != 0)
mpCustomShapePropertiesPtr->setTextAreaRotateAngle(-nTextAreaRotateAngle / 60000);
auto sHorzOverflow = getTextBody()->getTextProperties().msHorzOverflow;
if (!sHorzOverflow.isEmpty())
putPropertyToGrabBag(u"horzOverflow"_ustr, uno::Any(getTextBody()->getTextProperties().msHorzOverflow));
if (XML_ellipsis == getTextBody()->getTextProperties().moVertOverflow)
putPropertyToGrabBag(u"vertOverflow"_ustr, uno::Any(u"ellipsis"_ustr));
}
// Note that the script oox/source/drawingml/customshapes/generatePresetsData.pl looks
// for these ==cscode== and ==csdata== markers, so don't "clean up" these SAL_INFOs
SAL_INFO("oox.cscode", "==cscode== shape name: '" << msName << "'");
SAL_INFO("oox.csdata", "==csdata== shape name: '" << msName << "'");
mpCustomShapePropertiesPtr->pushToPropSet(xSet, maSize);
// Consider WordArt
if (mpTextBody && !mpTextBody->getTextProperties().msPrst.isEmpty()
&& mpTextBody->getTextProperties().msPrst != u"textNoShape")
{
bool bFromWordArt(aShapeProps.hasProperty(PROP_FromWordArt)
? aShapeProps.getProperty(PROP_FromWordArt).get<bool>()
: false);
FontworkHelpers::putCustomShapeIntoTextPathMode(
mxShape, mpCustomShapePropertiesPtr, mpTextBody->getTextProperties().msPrst,
bFromWordArt);
}
}
else if( getTextBody() )
getTextBody()->getTextProperties().pushVertSimulation();
// tdf#133037: a bit hackish: force Shape to rotate in the opposite direction the camera would rotate
PropertySet aPropertySet(mxShape);
if ( !bUseRotationTransform && (nShapeRotateInclCamera !=0) )
{
Degree100 nAngle(lcl_MSORotateAngleToAPIAngle(nShapeRotateInclCamera));
aPropertySet.setAnyProperty(PROP_RotateAngle, Any( sal_Int32(nAngle)));
aPropertySet.setAnyProperty( PROP_HoriOrientPosition, Any( maPosition.X ) );
aPropertySet.setAnyProperty( PROP_VertOrientPosition, Any( maPosition.Y ) );
}
// Make sure to not set text to placeholders. Doing it here would eventually call
// SvxTextEditSourceImpl::UpdateData, SdrObject::SetEmptyPresObj(false), and that
// would make the object behave like a standard outline object.
// TODO/FIXME: support custom prompt text in placeholders.
if (rServiceName == "com.sun.star.presentation.GraphicObjectShape")
mpTextBody.reset();
// in some cases, we don't have any text body.
if( mpTextBody && ( !bDoNotInsertEmptyTextBody || !mpTextBody->isEmpty() ) )
{
Reference < XText > xText( mxShape, UNO_QUERY );
if ( xText.is() ) // not every shape is supporting an XText interface (e.g. GroupShape)
{
TextCharacterProperties aCharStyleProperties;
if( const ShapeStyleRef* pFontRef = getShapeStyleRef( XML_fontRef ) )
{
if( pFontRef->mnThemedIdx != 0 )
{
if( pTheme )
if( const TextCharacterProperties* pCharProps = pTheme->getFontStyle( pFontRef->mnThemedIdx ) )
aCharStyleProperties.assignUsed( *pCharProps );
SAL_INFO("oox.drawingml", "Shape::createAndInsert: use font color");
if ( pFontRef->maPhClr.isUsed() )
{
aCharStyleProperties.maFillProperties.maFillColor = pFontRef->maPhClr;
aCharStyleProperties.maFillProperties.moFillType = XML_solidFill;
}
}
}
xText->setString(u""_ustr);
Reference < XTextCursor > xAt = xText->createTextCursor();
getTextBody()->insertAt( rFilterBase, xText, xAt, aCharStyleProperties, mpMasterTextListStyle );
const TextParagraphVector& rParagraphs = getTextBody()->getParagraphs();
if (!rParagraphs.empty())
{
const std::shared_ptr<TextParagraph>& pParagraph = rParagraphs[0];
if (pParagraph->getProperties().getParaAdjust())
{
style::ParagraphAdjust eAdjust = *pParagraph->getProperties().getParaAdjust();
if (eAdjust == style::ParagraphAdjust_CENTER)
{
// If the first paragraph is centered, then set the para adjustment of
// the shape itself to centered as well.
aPropertySet.setAnyProperty(PROP_ParaAdjust, uno::Any(eAdjust));
}
}
// tdf#144092 For empty textboxes push character styles &
// endParaRPr into the Shape's properties
if (rParagraphs.size() == 1 && pParagraph->getRuns().empty())
{
TextCharacterProperties aTextCharacterProps{ pParagraph->getCharacterStyle(
aCharStyleProperties, *mpMasterTextListStyle,
getTextBody()->getTextListStyle()) };
aTextCharacterProps.assignUsed(pParagraph->getEndProperties());
aTextCharacterProps.pushToPropSet(aPropertySet, rFilterBase);
}
}
// MS Office has e.g. fill and stroke of WordArt in the character properties,
// LibreOffice uses shape properties.
if (!mpTextBody->getTextProperties().msPrst.isEmpty()
&& mpTextBody->getTextProperties().msPrst != u"textNoShape")
{
lcl_copyCharPropsToShape(mxShape, mpTextBody, rFilterBase);
}
}
}
else if (mbTextBox)
{
// No drawingML text, but WPS text is expected: save the theme
// character color on the shape, then.
if(const ShapeStyleRef* pFontRef = getShapeStyleRef(XML_fontRef))
{
::Color nCharColor = pFontRef->maPhClr.getColor(rGraphicHelper);
aPropertySet.setAnyProperty(PROP_CharColor, uno::Any(nCharColor));
}
}
// Set glow effect properties
if (aEffectProperties.maGlow.moGlowRad.has_value()
&& aServiceName != "com.sun.star.drawing.GroupShape")
{
uno::Reference<beans::XPropertySet> propertySet (mxShape, uno::UNO_QUERY);
propertySet->setPropertyValue(u"GlowEffectRadius"_ustr, Any(convertEmuToHmm(aEffectProperties.maGlow.moGlowRad.value())));
propertySet->setPropertyValue(u"GlowEffectColor"_ustr, Any(aEffectProperties.maGlow.moGlowColor.getColor(rGraphicHelper)));
propertySet->setPropertyValue(u"GlowEffectTransparency"_ustr, Any(aEffectProperties.maGlow.moGlowColor.getTransparency()));
}
// Set soft edge effect properties
if (aEffectProperties.maSoftEdge.moRad.has_value())
{
uno::Reference<beans::XPropertySet> propertySet(mxShape, uno::UNO_QUERY);
propertySet->setPropertyValue(
u"SoftEdgeRadius"_ustr, Any(convertEmuToHmm(aEffectProperties.maSoftEdge.moRad.value())));
}
// Set text glow effect for shapes
if (mpTextBody && (!bDoNotInsertEmptyTextBody || !mpTextBody->isEmpty()))
{
const TextParagraphVector& rParagraphs = mpTextBody->getParagraphs();
if (!rParagraphs.empty())
{
EffectProperties aTextEffectProperties;
for (TextParagraphVector::const_iterator aPIt = rParagraphs.begin(), aPEnd = rParagraphs.end(); aPIt != aPEnd; ++aPIt)
{
const TextParagraph& rTextPara = **aPIt;
const TextCharacterProperties & rParaProps = rTextPara.getProperties().getTextCharacterProperties();
if (rParaProps.getEffectProperties().maGlow.moGlowRad.has_value())
{
aTextEffectProperties.assignUsed(rParaProps.getEffectProperties());
goto found;
}
else
{
for (TextRunVector::const_iterator aRIt = rTextPara.getRuns().begin(), aREnd = rTextPara.getRuns().end(); aRIt != aREnd; ++aRIt)
{
const TextRun& rTextRun = **aRIt;
const TextCharacterProperties& rRunrops = rTextRun.getTextCharacterProperties();
if (rRunrops.getEffectProperties().maGlow.moGlowRad.has_value())
{
aTextEffectProperties.assignUsed(rRunrops.getEffectProperties());
goto found;
}
}
}
}
found:
if (aTextEffectProperties.maGlow.moGlowRad.has_value())
{
xSet->setPropertyValue(u"GlowTextEffectRadius"_ustr,
uno::Any(convertEmuToHmm(aTextEffectProperties.maGlow.moGlowRad.value())));
xSet->setPropertyValue(u"GlowTextEffectColor"_ustr,
uno::Any(aTextEffectProperties.maGlow.moGlowColor.getColor(rGraphicHelper)));
xSet->setPropertyValue(u"GlowTextEffectTransparency"_ustr,
uno::Any(aTextEffectProperties.maGlow.moGlowColor.getTransparency()));
}
}
}
// Set the stroke and fill-color properties of the OLE shape
if (aServiceName == "com.sun.star.drawing.OLE2Shape" && mxOleObjectInfo
&& !mxOleObjectInfo->maShapeId.isEmpty())
if (::oox::vml::Drawing* pVmlDrawing = rFilterBase.getVmlDrawing())
if (const ::oox::vml::ShapeBase* pVmlShape
= pVmlDrawing->getShapes().getShapeById(mxOleObjectInfo->maShapeId))
{
// Apply stroke props from the type model of the related VML shape.
ShapePropertyMap aPropMap(rFilterBase.getModelObjectHelper());
pVmlShape->getTypeModel().maStrokeModel.pushToPropMap(
aPropMap, rFilterBase.getGraphicHelper());
// And, fill-color properties as well...
pVmlShape->getTypeModel().maFillModel.pushToPropMap(
aPropMap, rFilterBase.getGraphicHelper());
PropertySet(xSet).setProperties(aPropMap);
}
}
if (mxShape.is())
{
finalizeXShape( rFilterBase, rxShapes );
if (mpTextBody)
{
// tdf#151518. The method readjustTextDistances is fix for tdf#148321, but conflicts with
// text position in some of the SmartArt types in Writer. So exclude Writer here.
OUString sDocumentService;
rFilterBase.getMediaDescriptor()[utl::MediaDescriptor::PROP_DOCUMENTSERVICE] >>= sDocumentService;
if (sDocumentService != u"com.sun.star.text.TextDocument")
mpTextBody->getTextProperties().readjustTextDistances(mxShape);
// tdf#156857: ooxml files can have shape size with spAutoFit=true and the first priority of
// shape size is the fix size even if TextAutoGrowHeight is true.
bool bAutoHeight = false;
Reference< XPropertySetInfo > xSetInfo(xSet->getPropertySetInfo());
const OUString& rPropName = PropertyMap::getPropertyName(PROP_TextAutoGrowHeight);
if (xSetInfo.is() && xSetInfo->hasPropertyByName(rPropName))
{
uno::Any aTextAutoGrowHeight = xSet->getPropertyValue(u"TextAutoGrowHeight"_ustr);
aTextAutoGrowHeight >>= bAutoHeight;
}
SdrObject* pShape = SdrObject::getSdrObjectFromXShape(mxShape);
if (pShape && bAutoHeight && bIsCustomShape)
{
tools::Rectangle aOrigSize(aShapeRectHmm.X, aShapeRectHmm.Y,
aShapeRectHmm.X + aShapeRectHmm.Width, aShapeRectHmm.Y + aShapeRectHmm.Height);
tools::Rectangle aAdaptSize = pShape->GetLogicRect();
// a little tolerance same as in \svx\source\svdraw\svdoashp.cxx:AdjustTextFrameWidthAndHeight
if (std::abs(aOrigSize.GetHeight() - aAdaptSize.GetHeight()) > 1)
{
aAdaptSize.setHeight(aOrigSize.GetHeight());
pShape->NbcSetLogicRect(aAdaptSize, false);
}
}
}
}
return mxShape;
}
void Shape::keepDiagramDrawing(XmlFilterBase& rFilterBase, const OUString& rFragmentPath)
{
sal_Int32 length = maDiagramDoms.getLength();
maDiagramDoms.realloc(length + 1);
// drawingValue[0] => dom, drawingValue[1] => Sequence of associated relationships
uno::Sequence<uno::Any> diagramDrawing{
uno::Any(rFilterBase.importFragment(rFragmentPath)),
uno::Any(resolveRelationshipsOfTypeFromOfficeDoc(rFilterBase, rFragmentPath, u"image"))
};
beans::PropertyValue* pValue = maDiagramDoms.getArray();
pValue[length].Name = "OOXDrawing";
pValue[length].Value <<= diagramDrawing;
}
void Shape::keepDiagramCompatibilityInfo()
{
try
{
if( !maDiagramDoms.hasElements() )
return;
Reference < XPropertySet > xSet( mxShape, UNO_QUERY_THROW );
Reference < XPropertySetInfo > xSetInfo( xSet->getPropertySetInfo() );
if ( !xSetInfo.is() )
return;
const OUString aGrabBagPropName = UNO_NAME_MISC_OBJ_INTEROPGRABBAG;
if( !xSetInfo->hasPropertyByName( aGrabBagPropName ) )
return;
Sequence < PropertyValue > aGrabBag;
xSet->getPropertyValue( aGrabBagPropName ) >>= aGrabBag;
// We keep the previous items, if present
if ( aGrabBag.hasElements() )
xSet->setPropertyValue( aGrabBagPropName, Any( comphelper::concatSequences(aGrabBag, maDiagramDoms) ) );
else
xSet->setPropertyValue( aGrabBagPropName, Any( maDiagramDoms ) );
}
catch( const Exception& )
{
TOOLS_WARN_EXCEPTION( "oox.drawingml", "Shape::keepDiagramCompatibilityInfo" );
}
}
void Shape::convertSmartArtToMetafile(XmlFilterBase const & rFilterBase)
{
try
{
Reference<XPropertySet> xSet(mxShape, UNO_QUERY_THROW);
xSet->setPropertyValue(u"MoveProtect"_ustr, Any(true));
xSet->setPropertyValue(u"SizeProtect"_ustr, Any(true));
// Replace existing shapes with a new Graphic Object rendered
// from them
Reference<XShape> xShape(renderDiagramToGraphic(rFilterBase));
Reference<XShapes> xShapes(mxShape, UNO_QUERY_THROW);
tools::Rectangle aBackgroundRect
= SdrObject::getSdrObjectFromXShape(
Reference<XShape>(xShapes->getByIndex(0), UNO_QUERY_THROW))
->GetLogicRect();
while (xShapes->hasElements())
xShapes->remove(Reference<XShape>(xShapes->getByIndex(0), UNO_QUERY_THROW));
xShapes->add(xShape);
SdrObject::getSdrObjectFromXShape(
Reference<XShape>(xShapes->getByIndex(0), UNO_QUERY_THROW))
->NbcSetLogicRect(aBackgroundRect);
}
catch (const Exception&)
{
TOOLS_WARN_EXCEPTION("oox.drawingml", "Shape::convertSmartArtToMetafile");
}
}
Reference < XShape > Shape::renderDiagramToGraphic( XmlFilterBase const & rFilterBase )
{
Reference< XShape > xShape;
try
{
if( !maDiagramDoms.hasElements() )
return xShape;
// Stream in which to place the rendered shape
SvMemoryStream aTempStream;
Reference < io::XStream > xStream( new utl::OStreamWrapper( aTempStream ) );
Reference < io::XOutputStream > xOutputStream( xStream->getOutputStream() );
// Size of the rendering
awt::Size aActualSize = mxShape->getSize();
Size aResolution(Application::GetDefaultDevice()->LogicToPixel(Size(100, 100), MapMode(MapUnit::MapCM)));
double fPixelsPer100thmm = static_cast < double > ( aResolution.Width() ) / 100000.0;
awt::Size aSize( static_cast < sal_Int32 > ( ( fPixelsPer100thmm * aActualSize.Width ) + 0.5 ),
static_cast < sal_Int32 > ( ( fPixelsPer100thmm * aActualSize.Height ) + 0.5 ) );
Sequence< PropertyValue > aFilterData{
comphelper::makePropertyValue(u"PixelWidth"_ustr, aSize.Width),
comphelper::makePropertyValue(u"PixelHeight"_ustr, aSize.Height),
comphelper::makePropertyValue(u"LogicalWidth"_ustr, aActualSize.Width),
comphelper::makePropertyValue(u"LogicalHeight"_ustr, aActualSize.Height)
};
Sequence < PropertyValue > aDescriptor{
comphelper::makePropertyValue(u"OutputStream"_ustr, xOutputStream),
comphelper::makePropertyValue(u"FilterName"_ustr, u"SVM"_ustr), // Rendering format
comphelper::makePropertyValue(u"FilterData"_ustr, aFilterData)
};
Reference < lang::XComponent > xSourceDoc( mxShape, UNO_QUERY_THROW );
Reference < XGraphicExportFilter > xGraphicExporter = GraphicExportFilter::create( rFilterBase.getComponentContext() );
xGraphicExporter->setSourceDocument( xSourceDoc );
xGraphicExporter->filter( aDescriptor );
aTempStream.Seek( STREAM_SEEK_TO_BEGIN );
Graphic aGraphic;
GraphicFilter aFilter;
if ( aFilter.ImportGraphic( aGraphic, u"", aTempStream, GRFILTER_FORMAT_NOTFOUND, nullptr, GraphicFilterImportFlags::NONE ) != ERRCODE_NONE )
{
SAL_WARN( "oox.drawingml", "Shape::renderDiagramToGraphic: Unable to import rendered stream into graphic object" );
return xShape;
}
Reference < graphic::XGraphic > xGraphic( aGraphic.GetXGraphic() );
Reference < lang::XMultiServiceFactory > xServiceFact( rFilterBase.getModel(), UNO_QUERY_THROW );
xShape.set( xServiceFact->createInstance( u"com.sun.star.drawing.GraphicObjectShape"_ustr ), UNO_QUERY_THROW );
Reference < XPropertySet > xPropSet( xShape, UNO_QUERY_THROW );
xPropSet->setPropertyValue( u"Graphic"_ustr, Any( xGraphic ) );
xPropSet->setPropertyValue( u"MoveProtect"_ustr, Any( true ) );
xPropSet->setPropertyValue( u"SizeProtect"_ustr, Any( true ) );
xPropSet->setPropertyValue( u"Name"_ustr, Any( u"RenderedShapes"_ustr ) );
}
catch( const Exception& )
{
TOOLS_WARN_EXCEPTION( "oox.drawingml", "Shape::renderDiagramToGraphic" );
}
return xShape;
}
void Shape::setTextBody(const TextBodyPtr & pTextBody)
{
mpTextBody = pTextBody;
}
void Shape::setMasterTextListStyle( const TextListStylePtr& pMasterTextListStyle )
{
SAL_INFO("oox.drawingml", "Shape::setMasterTextListStyle: Set master text list style to shape id='" << msId << "'");
mpMasterTextListStyle = pMasterTextListStyle;
}
OUString Shape::finalizeServiceName( XmlFilterBase& rFilter, const OUString& rServiceName, const awt::Rectangle& rShapeRect )
{
OUString aServiceName = rServiceName;
switch( meFrameType )
{
case FRAMETYPE_OLEOBJECT:
{
awt::Size aOleSize( rShapeRect.Width, rShapeRect.Height );
if( rFilter.getOleObjectHelper().importOleObject( maShapeProperties, *mxOleObjectInfo, aOleSize ) )
aServiceName = "com.sun.star.drawing.OLE2Shape";
// get the path to the representation graphic
OUString aGraphicPath;
if( !mxOleObjectInfo->maShapeId.isEmpty() )
if( ::oox::vml::Drawing* pVmlDrawing = rFilter.getVmlDrawing() )
if( const ::oox::vml::ShapeBase* pVmlShape = pVmlDrawing->getShapes().getShapeById( mxOleObjectInfo->maShapeId ) )
aGraphicPath = pVmlShape->getGraphicPath();
// import and store the graphic
if( !aGraphicPath.isEmpty() )
{
// Transfer shape's width and height to graphicsfilter (can be used by WMF/EMF)
WmfExternal aExtHeader;
aExtHeader.mapMode = 8; // MM_ANISOTROPIC
aExtHeader.xExt = rShapeRect.Width;
aExtHeader.yExt = rShapeRect.Height;
Reference< graphic::XGraphic > xGraphic = rFilter.getGraphicHelper().importEmbeddedGraphic( aGraphicPath, &aExtHeader );
if( xGraphic.is() )
maShapeProperties.setProperty(PROP_Graphic, xGraphic);
}
}
break;
default:;
}
return aServiceName;
}
void Shape::finalizeXShape( XmlFilterBase& rFilter, const Reference< XShapes >& rxShapes )
{
switch( meFrameType )
{
case FRAMETYPE_CHART:
{
OSL_ENSURE( !mxChartShapeInfo->maFragmentPath.isEmpty(), "Shape::finalizeXShape - missing chart fragment" );
if( mxShape.is() && !mxChartShapeInfo->maFragmentPath.isEmpty() ) try
{
// set the chart2 OLE class ID at the OLE shape
PropertySet aShapeProp( mxShape );
aShapeProp.setProperty( PROP_CLSID, u"12dcae26-281f-416f-a234-c3086127382e"_ustr );
// get the XModel interface of the embedded object from the OLE shape
Reference< frame::XModel > xDocModel;
aShapeProp.getProperty( xDocModel, PROP_Model );
Reference< chart2::XChartDocument > xChartDoc( xDocModel, UNO_QUERY_THROW );
// load the chart data from the XML fragment
#if ENABLE_WASM_STRIP_CHART
(void) rFilter;
(void) rxShapes;
#else
// WASM_CHART change
// TODO: Instead of using convertFromModel an alternative may be
// added to convert not to Chart/OLE SdrObejct, but to GraphicObject
// with the Chart visualization. There should be a preview available
// in the imported chart data
bool bMSO2007Doc = rFilter.isMSO2007Document();
chart::ChartSpaceModel aModel(bMSO2007Doc);
oox::ppt::PowerPointImport* pPowerPointImport
= dynamic_cast<oox::ppt::PowerPointImport*>(&rFilter);
ClrMapPtr pClrMap; // The original color map
if (pPowerPointImport)
{
// Use a copy of current color map, which the fragment may override locally
pClrMap = pPowerPointImport->getActualSlidePersist()->getClrMap();
aModel.mpClrMap = pClrMap ? std::make_shared<ClrMap>(*pClrMap)
: std::make_shared<ClrMap>();
pPowerPointImport->getActualSlidePersist()->setClrMap(aModel.mpClrMap);
}
rtl::Reference<chart::ChartSpaceFragment> pChartSpaceFragment = new chart::ChartSpaceFragment(
rFilter, mxChartShapeInfo->maFragmentPath, aModel );
const OUString aThemeOverrideFragmentPath( pChartSpaceFragment->
getFragmentPathFromFirstTypeFromOfficeDoc(u"themeOverride") );
rFilter.importFragment( pChartSpaceFragment );
// The original theme.
ThemePtr pTheme;
if (!aThemeOverrideFragmentPath.isEmpty() && pPowerPointImport)
{
// Handle theme override.
uno::Reference< xml::sax::XFastSAXSerializable > xDoc(
rFilter.importFragment(aThemeOverrideFragmentPath), uno::UNO_QUERY_THROW);
pTheme = pPowerPointImport->getActualSlidePersist()->getTheme();
auto pThemeOverride = std::make_shared<Theme>(*pTheme);
rFilter.importFragment(
new ThemeOverrideFragmentHandler(rFilter, aThemeOverrideFragmentPath, *pThemeOverride, *pThemeOverride->getTheme()),
xDoc);
pPowerPointImport->getActualSlidePersist()->setTheme(pThemeOverride);
}
// convert imported chart model to chart document
Reference< drawing::XShapes > xExternalPage;
if( !mxChartShapeInfo->mbEmbedShapes )
xExternalPage = rxShapes;
if( rFilter.getChartConverter() )
{
rFilter.getChartConverter()->convertFromModel( rFilter, aModel, xChartDoc, xExternalPage, mxShape->getPosition(), mxShape->getSize() );
if( !xChartDoc->hasInternalDataProvider() )
{
Reference< chart2::data::XDataReceiver > xDataRec( xChartDoc, UNO_QUERY );
Reference< chart2::data::XDataSource > xData = xDataRec->getUsedData();
if( !xData->getDataSequences().hasElements() || !xData->getDataSequences()[0]->getValues().is() ||
!xData->getDataSequences()[0]->getValues()->getData().hasElements() )
{
rFilter.useInternalChartDataTable( true );
rFilter.getChartConverter()->convertFromModel( rFilter, aModel, xChartDoc, xExternalPage, mxShape->getPosition(), mxShape->getSize() );
rFilter.useInternalChartDataTable( false );
}
}
}
if (pPowerPointImport)
{
if (!aThemeOverrideFragmentPath.isEmpty())
{
// Restore the original theme.
pPowerPointImport->getActualSlidePersist()->setTheme(pTheme);
}
// Restore the original color map
pPowerPointImport->getActualSlidePersist()->setClrMap(std::move(pClrMap));
}
#endif
}
catch( Exception& )
{
}
}
break;
default:;
}
}
void Shape::putPropertyToGrabBag( const OUString& sPropertyName, const Any& aPropertyValue )
{
PropertyValue aNewProperty;
aNewProperty.Name = sPropertyName;
aNewProperty.Value = aPropertyValue;
putPropertyToGrabBag( aNewProperty );
}
void Shape::putPropertyToGrabBag( const PropertyValue& pProperty )
{
Reference< XPropertySet > xSet( mxShape, UNO_QUERY );
Reference< XPropertySetInfo > xSetInfo( xSet->getPropertySetInfo() );
const OUString aGrabBagPropName = UNO_NAME_MISC_OBJ_INTEROPGRABBAG;
if( mxShape.is() && xSet.is() && xSetInfo.is() && xSetInfo->hasPropertyByName( aGrabBagPropName ) )
{
Sequence< PropertyValue > aGrabBag;
xSet->getPropertyValue( aGrabBagPropName ) >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length + 1 );
aGrabBag.getArray()[length] = pProperty;
xSet->setPropertyValue( aGrabBagPropName, Any( aGrabBag ) );
}
}
void Shape::putPropertiesToGrabBag( const Sequence< PropertyValue >& aProperties )
{
Reference< XPropertySet > xSet( mxShape, UNO_QUERY );
Reference< XPropertySetInfo > xSetInfo( xSet->getPropertySetInfo() );
const OUString aGrabBagPropName = UNO_NAME_MISC_OBJ_INTEROPGRABBAG;
if( !(mxShape.is() && xSet.is() && xSetInfo.is() && xSetInfo->hasPropertyByName( aGrabBagPropName )) )
return;
// get existing grab bag
Sequence< PropertyValue > aGrabBag;
xSet->getPropertyValue( aGrabBagPropName ) >>= aGrabBag;
std::vector<PropertyValue> aVec;
aVec.reserve(aProperties.getLength());
// put the new items
std::transform(aProperties.begin(), aProperties.end(), std::back_inserter(aVec),
[](const PropertyValue& rProp) {
PropertyValue aProp;
aProp.Name = rProp.Name;
aProp.Value = rProp.Value;
return aProp;
});
// put it back to the shape
xSet->setPropertyValue( aGrabBagPropName, Any( comphelper::concatSequences(aGrabBag, aVec) ) );
}
FillProperties Shape::getActualFillProperties(const Theme* pTheme, const FillProperties* pParentShapeFillProps) const
{
FillProperties aFillProperties;
aFillProperties.moFillType = XML_noFill;
// Reference shape properties
aFillProperties.assignUsed( *mpShapeRefFillPropPtr );
// Theme
if( pTheme != nullptr )
{
if( const ShapeStyleRef* pFillRef = getShapeStyleRef( XML_fillRef ) )
{
if( const FillProperties* pFillProps = pTheme->getFillStyle( pFillRef->mnThemedIdx ) )
aFillProperties.assignUsed( *pFillProps );
}
}
// Properties specified directly for this shape
aFillProperties.assignUsed(getFillProperties());
// Parent shape's properties
if ( pParentShapeFillProps != nullptr)
if( getFillProperties().moFillType.has_value() && getFillProperties().moFillType.value() == XML_grpFill )
aFillProperties.assignUsed( *pParentShapeFillProps );
return aFillProperties;
}
LineProperties Shape::getActualLineProperties(const Theme* pTheme) const
{
LineProperties aLineProperties;
aLineProperties.maLineFill.moFillType = XML_noFill;
// Reference shape properties
aLineProperties.assignUsed( *mpShapeRefLinePropPtr );
// Theme
if( pTheme != nullptr )
{
if( const ShapeStyleRef* pLineRef = getShapeStyleRef( XML_lnRef ) )
{
if( const LineProperties* pLineProps = pTheme->getLineStyle( pLineRef->mnThemedIdx ) )
aLineProperties.assignUsed( *pLineProps );
}
}
// Properties specified directly for this shape
aLineProperties.assignUsed( getLineProperties() );
return aLineProperties;
}
EffectProperties Shape::getActualEffectProperties(const Theme* pTheme) const
{
EffectProperties aEffectProperties;
// Reference shape properties
aEffectProperties.assignUsed( *mpShapeRefEffectPropPtr );
// Theme
if( pTheme != nullptr )
{
if( const ShapeStyleRef* pEffectRef = getShapeStyleRef( XML_effectRef ) )
{
if( const EffectProperties* pEffectProps = pTheme->getEffectStyle( pEffectRef->mnThemedIdx ) )
aEffectProperties.assignUsed( *pEffectProps );
}
}
// Properties specified directly for this shape
aEffectProperties.assignUsed ( getEffectProperties() );
return aEffectProperties;
}
uno::Sequence< uno::Sequence< uno::Any > > Shape::resolveRelationshipsOfTypeFromOfficeDoc(core::XmlFilterBase& rFilter, const OUString& sFragment, std::u16string_view sType )
{
uno::Sequence< uno::Sequence< uno::Any > > xRelListTemp;
sal_Int32 counter = 0;
core::RelationsRef xRels = rFilter.importRelations( sFragment );
if ( xRels )
{
core::RelationsRef xImageRels = xRels->getRelationsFromTypeFromOfficeDoc( sType );
if ( xImageRels )
{
xRelListTemp.realloc( xImageRels->size() );
auto pxRelListTemp = xRelListTemp.getArray();
for (auto const& imageRel : *xImageRels)
{
uno::Sequence< uno::Any > diagramRelTuple (3);
auto pdiagramRelTuple = diagramRelTuple.getArray();
// [0] => RID, [1] => InputStream [2] => extension
OUString sRelId = imageRel.second.maId;
pdiagramRelTuple[0] <<= sRelId;
OUString sTarget = xImageRels->getFragmentPathFromRelId( sRelId );
uno::Reference< io::XInputStream > xImageInputStrm( rFilter.openInputStream( sTarget ), uno::UNO_SET_THROW );
StreamDataSequence dataSeq;
if ( rFilter.importBinaryData( dataSeq, sTarget ) )
{
pdiagramRelTuple[1] <<= dataSeq;
}
pdiagramRelTuple[2] <<= sTarget.copy( sTarget.lastIndexOf(".") );
pxRelListTemp[counter] = std::move(diagramRelTuple);
++counter;
}
xRelListTemp.realloc(counter);
}
}
return xRelListTemp;
}
void Shape::cloneFillProperties()
{
auto pFillProperties = std::make_shared<FillProperties>();
pFillProperties->assignUsed(*mpFillPropertiesPtr);
mpFillPropertiesPtr = std::move(pFillProperties);
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V522 There might be dereferencing of a potential null pointer 'pPPT'.
↑ V522 There might be dereferencing of a potential null pointer 'pMagic'.
↑ V560 A part of conditional expression is always true: eFillStyle == drawing::FillStyle_NONE.
↑ V560 A part of conditional expression is always true: eLineStyle == drawing::LineStyle_NONE.
↑ V1007 The value from the potentially uninitialized optional 'oShadowDistance' is used. Probably it is a mistake.