/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <config_wasm_strip.h>
#include <sal/config.h>
#include <sal/log.hxx>
#include <filter/msfilter/util.hxx>
#include <o3tl/string_view.hxx>
#include <o3tl/any.hxx>
#include <oox/core/xmlfilterbase.hxx>
#include <oox/export/shapes.hxx>
#include <oox/export/utils.hxx>
#include <oox/token/namespaces.hxx>
#include <oox/token/relationship.hxx>
#include <oox/token/tokens.hxx>
#include <initializer_list>
#include <string_view>
#include <com/sun/star/beans/PropertyValues.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/beans/XPropertySetInfo.hpp>
#include <com/sun/star/beans/XPropertyState.hpp>
#include <com/sun/star/container/XChild.hpp>
#include <com/sun/star/document/XExporter.hpp>
#include <com/sun/star/document/XStorageBasedDocument.hpp>
#include <com/sun/star/drawing/CircleKind.hpp>
#include <com/sun/star/drawing/FillStyle.hpp>
#include <com/sun/star/drawing/ConnectorType.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeParameterType.hpp>
#include <com/sun/star/embed/Aspects.hpp>
#include <com/sun/star/embed/EmbedStates.hpp>
#include <com/sun/star/embed/XEmbeddedObject.hpp>
#include <com/sun/star/embed/XEmbedPersist.hpp>
#include <com/sun/star/frame/XStorable.hpp>
#include <com/sun/star/graphic/XGraphic.hpp>
#include <com/sun/star/i18n/ScriptType.hpp>
#include <com/sun/star/io/XOutputStream.hpp>
#include <com/sun/star/text/XSimpleText.hpp>
#include <com/sun/star/text/XText.hpp>
#include <com/sun/star/table/XTable.hpp>
#include <com/sun/star/table/XMergeableCell.hpp>
#include <com/sun/star/chart2/XChartDocument.hpp>
#include <com/sun/star/frame/XModel.hpp>
#include <com/sun/star/uno/XComponentContext.hpp>
#include <com/sun/star/drawing/XDrawPages.hpp>
#include <com/sun/star/drawing/XDrawPagesSupplier.hpp>
#include <com/sun/star/presentation/ClickAction.hpp>
#include <com/sun/star/drawing/XGluePointsSupplier.hpp>
#include <com/sun/star/container/XIdentifierAccess.hpp>
#include <com/sun/star/table/BorderLineStyle.hpp>
#include <tools/globname.hxx>
#include <comphelper/classids.hxx>
#include <comphelper/propertysequence.hxx>
#include <comphelper/storagehelper.hxx>
#include <sot/exchange.hxx>
#include <utility>
#include <vcl/graph.hxx>
#include <vcl/outdev.hxx>
#include <filter/msfilter/escherex.hxx>
#include <svx/svdoashp.hxx>
#include <svx/svdoole2.hxx>
#include <comphelper/diagnose_ex.hxx>
#include <oox/export/chartexport.hxx>
#include <oox/mathml/imexport.hxx>
#include <basegfx/numeric/ftools.hxx>
#include <oox/export/DMLPresetShapeExport.hxx>
#include <frozen/bits/defines.h>
#include <frozen/bits/elsa_std.h>
#include <frozen/set.h>
#include <frozen/unordered_map.h>
#include <sax/fastattribs.hxx>
using namespace ::css;
using namespace ::css::beans;
using namespace ::css::uno;
using namespace ::css::drawing;
using namespace ::css::table;
using namespace ::css::container;
using namespace ::css::document;
using namespace ::css::text;
using ::css::io::XOutputStream;
using ::css::chart2::XChartDocument;
using ::css::frame::XModel;
using ::oox::core::XmlFilterBase;
using ::sax_fastparser::FSHelperPtr;
namespace oox {
static void lcl_ConvertProgID(std::u16string_view rProgID,
OUString & o_rMediaType, OUString & o_rRelationType, OUString & o_rFileExtension)
{
if (rProgID == u"Excel.Sheet.12")
{
o_rMediaType = "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "xlsx";
}
else if (o3tl::starts_with(rProgID, u"Excel.SheetBinaryMacroEnabled.12") )
{
o_rMediaType = "application/vnd.ms-excel.sheet.binary.macroEnabled.12";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "xlsb";
}
else if (o3tl::starts_with(rProgID, u"Excel.SheetMacroEnabled.12"))
{
o_rMediaType = "application/vnd.ms-excel.sheet.macroEnabled.12";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "xlsm";
}
else if (o3tl::starts_with(rProgID, u"Excel.Sheet"))
{
o_rMediaType = "application/vnd.ms-excel";
o_rRelationType = oox::getRelationship(Relationship::OLEOBJECT);
o_rFileExtension = "xls";
}
else if (rProgID == u"PowerPoint.Show.12")
{
o_rMediaType = "application/vnd.openxmlformats-officedocument.presentationml.presentation";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "pptx";
}
else if (rProgID == u"PowerPoint.ShowMacroEnabled.12")
{
o_rMediaType = "application/vnd.ms-powerpoint.presentation.macroEnabled.12";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "pptm";
}
else if (o3tl::starts_with(rProgID, u"PowerPoint.Show"))
{
o_rMediaType = "application/vnd.ms-powerpoint";
o_rRelationType = oox::getRelationship(Relationship::OLEOBJECT);
o_rFileExtension = "ppt";
}
else if (o3tl::starts_with(rProgID, u"PowerPoint.Slide.12"))
{
o_rMediaType = "application/vnd.openxmlformats-officedocument.presentationml.slide";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "sldx";
}
else if (rProgID == u"PowerPoint.SlideMacroEnabled.12")
{
o_rMediaType = "application/vnd.ms-powerpoint.slide.macroEnabled.12";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "sldm";
}
else if (rProgID == u"Word.DocumentMacroEnabled.12")
{
o_rMediaType = "application/vnd.ms-word.document.macroEnabled.12";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "docm";
}
else if (rProgID == u"Word.Document.12")
{
o_rMediaType = "application/vnd.openxmlformats-officedocument.wordprocessingml.document";
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
o_rFileExtension = "docx";
}
else if (rProgID == u"Word.Document.8")
{
o_rMediaType = "application/msword";
o_rRelationType = oox::getRelationship(Relationship::OLEOBJECT);
o_rFileExtension = "doc";
}
else if (rProgID == u"Excel.Chart.8")
{
o_rMediaType = "application/vnd.ms-excel";
o_rRelationType = oox::getRelationship(Relationship::OLEOBJECT);
o_rFileExtension = "xls";
}
else if (rProgID == u"AcroExch.Document.11")
{
o_rMediaType = "application/pdf";
o_rRelationType = oox::getRelationship(Relationship::OLEOBJECT);
o_rFileExtension = "pdf";
}
else
{
o_rMediaType = "application/vnd.openxmlformats-officedocument.oleObject";
o_rRelationType = oox::getRelationship(Relationship::OLEOBJECT);
o_rFileExtension = "bin";
}
}
static uno::Reference<io::XInputStream> lcl_StoreOwnAsOOXML(
uno::Reference<uno::XComponentContext> const& xContext,
uno::Reference<embed::XEmbeddedObject> const& xObj,
char const*& o_rpProgID,
OUString & o_rMediaType, OUString & o_rRelationType, OUString & o_rSuffix)
{
static struct {
struct {
sal_uInt32 n1;
sal_uInt16 n2, n3;
sal_uInt8 b8, b9, b10, b11, b12, b13, b14, b15;
} ClassId;
char const* pFilterName;
char const* pMediaType;
char const* pProgID;
char const* pSuffix;
} const s_Mapping[] = {
{ {SO3_SW_CLASSID_60}, "MS Word 2007 XML", "application/vnd.openxmlformats-officedocument.wordprocessingml.document", "Word.Document.12", "docx" },
{ {SO3_SC_CLASSID_60}, "Calc MS Excel 2007 XML", "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "Excel.Sheet.12", "xlsx" },
{ {SO3_SIMPRESS_CLASSID_60}, "Impress MS PowerPoint 2007 XML", "application/vnd.openxmlformats-officedocument.presentationml.presentation", "PowerPoint.Show.12", "pptx" },
// FIXME: Draw does not appear to have a MSO format export filter?
// { {SO3_SDRAW_CLASSID}, "", "", "", "" },
{ {SO3_SCH_CLASSID_60}, "unused", "", "", "" },
{ {SO3_SM_CLASSID_60}, "unused", "", "", "" },
};
const char * pFilterName(nullptr);
SvGlobalName const classId(xObj->getClassID());
for (auto & i : s_Mapping)
{
auto const& rId(i.ClassId);
SvGlobalName const temp(rId.n1, rId.n2, rId.n3, rId.b8, rId.b9, rId.b10, rId.b11, rId.b12, rId.b13, rId.b14, rId.b15);
if (temp == classId)
{
assert(SvGlobalName(SO3_SCH_CLASSID_60) != classId); // chart should be written elsewhere!
assert(SvGlobalName(SO3_SM_CLASSID_60) != classId); // formula should be written elsewhere!
pFilterName = i.pFilterName;
o_rMediaType = OUString::createFromAscii(i.pMediaType);
o_rpProgID = i.pProgID;
o_rSuffix = OUString::createFromAscii(i.pSuffix);
o_rRelationType = oox::getRelationship(Relationship::PACKAGE);
break;
}
}
if (!pFilterName)
{
SAL_WARN("oox.shape", "oox::GetOLEObjectStream: unknown ClassId " << classId.GetHexName());
return nullptr;
}
if (embed::EmbedStates::LOADED == xObj->getCurrentState())
{
xObj->changeState(embed::EmbedStates::RUNNING);
}
// use a temp stream - while it would work to store directly to a
// fragment stream, an error during export means we'd have to delete it
uno::Reference<io::XStream> const xTempStream(
xContext->getServiceManager()->createInstanceWithContext(
u"com.sun.star.comp.MemoryStream"_ustr, xContext),
uno::UNO_QUERY_THROW);
uno::Sequence<beans::PropertyValue> args( comphelper::InitPropertySequence({
{ "OutputStream", Any(xTempStream->getOutputStream()) },
{ "FilterName", Any(OUString::createFromAscii(pFilterName)) }
}));
uno::Reference<frame::XStorable> xStorable(xObj->getComponent(), uno::UNO_QUERY);
try
{
xStorable->storeToURL(u"private:stream"_ustr, args);
}
catch (uno::Exception const&)
{
TOOLS_WARN_EXCEPTION("oox.shape", "oox::GetOLEObjectStream");
return nullptr;
}
xTempStream->getOutputStream()->closeOutput();
return xTempStream->getInputStream();
}
uno::Reference<io::XInputStream> GetOLEObjectStream(
uno::Reference<uno::XComponentContext> const& xContext,
uno::Reference<embed::XEmbeddedObject> const& xObj,
std::u16string_view i_rProgID,
OUString & o_rMediaType,
OUString & o_rRelationType,
OUString & o_rSuffix,
const char *& o_rpProgID)
{
uno::Reference<io::XInputStream> xInStream;
try
{
uno::Reference<document::XStorageBasedDocument> const xParent(
uno::Reference<container::XChild>(xObj, uno::UNO_QUERY_THROW)->getParent(),
uno::UNO_QUERY_THROW);
uno::Reference<embed::XStorage> const xParentStorage(xParent->getDocumentStorage());
OUString const entryName(
uno::Reference<embed::XEmbedPersist>(xObj, uno::UNO_QUERY_THROW)->getEntryName());
if (xParentStorage->isStreamElement(entryName))
{
lcl_ConvertProgID(i_rProgID, o_rMediaType, o_rRelationType, o_rSuffix);
xInStream = xParentStorage->cloneStreamElement(entryName)->getInputStream();
// TODO: make it possible to take the sMediaType from the stream
}
else // the object is ODF - either the whole document is
{ // ODF, or the OLE was edited so it was converted to ODF
xInStream = lcl_StoreOwnAsOOXML(xContext, xObj,
o_rpProgID, o_rMediaType, o_rRelationType, o_rSuffix);
}
}
catch (uno::Exception const&)
{
TOOLS_WARN_EXCEPTION("oox.shape", "oox::GetOLEObjectStream");
}
return xInStream;
}
} // namespace oox
namespace oox::drawingml {
ShapeExport::ShapeExport( sal_Int32 nXmlNamespace, FSHelperPtr pFS, ShapeHashMap* pShapeMap, XmlFilterBase* pFB, DocumentType eDocumentType, DMLTextExport* pTextExport, bool bUserShapes )
: DrawingML( std::move(pFS), pFB, eDocumentType, pTextExport )
, m_nEmbeddedObjects(0)
, mnShapeIdMax( 1 )
, mbUserShapes( bUserShapes )
, mnXmlNamespace( nXmlNamespace )
, maMapModeSrc( MapUnit::Map100thMM )
, maMapModeDest( MapUnit::MapInch, Point(), Fraction( 1, 576 ), Fraction( 1, 576 ) )
, mpShapeMap( pShapeMap ? pShapeMap : &maShapeMap )
{
mpURLTransformer = std::make_shared<URLTransformer>();
}
void ShapeExport::SetURLTranslator(const std::shared_ptr<URLTransformer>& pTransformer)
{
mpURLTransformer = pTransformer;
}
awt::Size ShapeExport::MapSize( const awt::Size& rSize ) const
{
Size aRetSize( OutputDevice::LogicToLogic( Size( rSize.Width, rSize.Height ), maMapModeSrc, maMapModeDest ) );
if ( !aRetSize.Width() )
aRetSize.AdjustWidth( 1 );
if ( !aRetSize.Height() )
aRetSize.AdjustHeight( 1 );
return awt::Size( aRetSize.Width(), aRetSize.Height() );
}
static bool IsNonEmptySimpleText(const Reference<XInterface>& xIface)
{
if (Reference<XSimpleText> xText{ xIface, UNO_QUERY })
return xText->getString().getLength();
return false;
}
bool ShapeExport::NonEmptyText( const Reference< XInterface >& xIface )
{
Reference< XPropertySet > xPropSet( xIface, UNO_QUERY );
if( xPropSet.is() )
{
Reference< XPropertySetInfo > xPropSetInfo = xPropSet->getPropertySetInfo();
if ( xPropSetInfo.is() )
{
if ( xPropSetInfo->hasPropertyByName( u"IsEmptyPresentationObject"_ustr ) )
{
bool bIsEmptyPresObj = false;
if ( xPropSet->getPropertyValue( u"IsEmptyPresentationObject"_ustr ) >>= bIsEmptyPresObj )
{
SAL_INFO("oox.shape", "empty presentation object " << bIsEmptyPresObj << " , props:");
if( bIsEmptyPresObj )
return true;
}
}
if ( xPropSetInfo->hasPropertyByName( u"IsPresentationObject"_ustr ) )
{
bool bIsPresObj = false;
if ( xPropSet->getPropertyValue( u"IsPresentationObject"_ustr ) >>= bIsPresObj )
{
SAL_INFO("oox.shape", "presentation object " << bIsPresObj << ", props:");
if( bIsPresObj )
return true;
}
}
}
}
return IsNonEmptySimpleText(xIface);
}
static void AddExtLst(FSHelperPtr const& pFS, Reference<XPropertySet> const& xShape)
{
if (xShape->getPropertySetInfo()->hasPropertyByName(u"Decorative"_ustr)
&& xShape->getPropertyValue(u"Decorative"_ustr).get<bool>())
{
pFS->startElementNS(XML_a, XML_extLst);
// FSNS(XML_xmlns, XML_a), GetExport().GetFilter().getNamespaceURL(OOX_NS(dml)));
pFS->startElementNS(XML_a, XML_ext,
// MSO uses this "URI" which is obviously not a URI
XML_uri, "{C183D7F6-B498-43B3-948B-1728B52AA6E4}");
pFS->singleElementNS(XML_adec, XML_decorative,
FSNS(XML_xmlns, XML_adec), "http://schemas.microsoft.com/office/drawing/2017/decorative",
XML_val, "1");
pFS->endElementNS(XML_a, XML_ext);
pFS->endElementNS(XML_a, XML_extLst);
}
}
ShapeExport& ShapeExport::WritePolyPolygonShape( const Reference< XShape >& xShape, const bool bClosed )
{
SAL_INFO("oox.shape", "write polypolygon shape");
FSHelperPtr pFS = GetFS();
pFS->startElementNS(mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp));
awt::Point aPos = xShape->getPosition();
// Position is relative to group for child elements in Word, but absolute in API.
if (GetDocumentType() == DOCUMENT_DOCX && !mbUserShapes && m_xParent.is())
{
awt::Point aParentPos = m_xParent->getPosition();
aPos.X -= aParentPos.X;
aPos.Y -= aParentPos.Y;
}
awt::Size aSize = xShape->getSize();
tools::Rectangle aRect(Point(aPos.X, aPos.Y), Size(aSize.Width, aSize.Height));
#if OSL_DEBUG_LEVEL > 0
tools::PolyPolygon aPolyPolygon = EscherPropertyContainer::GetPolyPolygon(xShape);
awt::Size size = MapSize( awt::Size( aRect.GetWidth(), aRect.GetHeight() ) );
SAL_INFO("oox.shape", "poly count " << aPolyPolygon.Count());
SAL_INFO("oox.shape", "size: " << size.Width << " x " << size.Height);
#endif
Reference<XPropertySet> const xProps(xShape, UNO_QUERY);
// non visual shape properties
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
pFS->startElementNS(mnXmlNamespace, XML_nvSpPr);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
AddExtLst(pFS, xProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
}
pFS->singleElementNS(mnXmlNamespace, XML_cNvSpPr);
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
WriteNonVisualProperties( xShape );
pFS->endElementNS( mnXmlNamespace, XML_nvSpPr );
}
// visual shape properties
pFS->startElementNS(mnXmlNamespace, XML_spPr);
WriteTransformation( xShape, aRect, XML_a );
WritePolyPolygon(xShape, bClosed);
if( xProps.is() ) {
if( bClosed )
WriteFill(xProps, aSize);
WriteOutline( xProps );
}
pFS->endElementNS( mnXmlNamespace, XML_spPr );
// write text
WriteTextBox( xShape, mnXmlNamespace );
pFS->endElementNS( mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp) );
return *this;
}
ShapeExport& ShapeExport::WriteClosedPolyPolygonShape( const Reference< XShape >& xShape )
{
return WritePolyPolygonShape( xShape, true );
}
ShapeExport& ShapeExport::WriteOpenPolyPolygonShape( const Reference< XShape >& xShape )
{
return WritePolyPolygonShape( xShape, false );
}
ShapeExport& ShapeExport::WriteGroupShape(const uno::Reference<drawing::XShape>& xShape)
{
FSHelperPtr pFS = GetFS();
sal_Int32 nGroupShapeToken = XML_grpSp;
if (GetDocumentType() == DOCUMENT_DOCX && !mbUserShapes)
{
if (!m_xParent.is())
nGroupShapeToken = XML_wgp; // toplevel
else
mnXmlNamespace = XML_wpg;
}
pFS->startElementNS(mnXmlNamespace, nGroupShapeToken);
// non visual properties
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
pFS->startElementNS(mnXmlNamespace, XML_nvGrpSpPr);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
uno::Reference<beans::XPropertySet> const xShapeProps(xShape, uno::UNO_QUERY_THROW);
AddExtLst(pFS, xShapeProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
pFS->singleElementNS(mnXmlNamespace, XML_cNvGrpSpPr);
WriteNonVisualProperties(xShape );
pFS->endElementNS(mnXmlNamespace, XML_nvGrpSpPr);
}
else
pFS->singleElementNS(mnXmlNamespace, XML_cNvGrpSpPr);
// visual properties
pFS->startElementNS(mnXmlNamespace, XML_grpSpPr);
WriteShapeTransformation(xShape, XML_a, false, false, true);
pFS->endElementNS(mnXmlNamespace, XML_grpSpPr);
uno::Reference<drawing::XShapes> xGroupShape(xShape, uno::UNO_QUERY_THROW);
uno::Reference<drawing::XShape> xParent = m_xParent;
m_xParent = xShape;
for (sal_Int32 i = 0; i < xGroupShape->getCount(); ++i)
{
uno::Reference<drawing::XShape> xChild(xGroupShape->getByIndex(i), uno::UNO_QUERY_THROW);
sal_Int32 nSavedNamespace = mnXmlNamespace;
uno::Reference<lang::XServiceInfo> xServiceInfo(xChild, uno::UNO_QUERY_THROW);
if (GetDocumentType() == DOCUMENT_DOCX && !mbUserShapes)
{
// tdf#128820: WriteGraphicObjectShapePart calls WriteTextShape for non-empty simple
// text objects, which needs writing into wps::wsp element, so make sure to use wps
// namespace for those objects
if (xServiceInfo->supportsService(u"com.sun.star.drawing.GraphicObjectShape"_ustr)
&& !IsNonEmptySimpleText(xChild))
mnXmlNamespace = XML_pic;
else
mnXmlNamespace = XML_wps;
}
WriteShape(xChild);
mnXmlNamespace = nSavedNamespace;
}
m_xParent = std::move(xParent);
pFS->endElementNS(mnXmlNamespace, nGroupShapeToken);
return *this;
}
namespace
{
constexpr frozen::set<std::u16string_view, 57> constDenySet(
{
u"block-arc",
u"rectangle",
u"ellipse",
u"ring",
u"can",
u"cube",
u"paper",
u"frame",
u"forbidden",
u"smiley",
u"sun",
u"flower",
u"bracket-pair",
u"brace-pair",
u"quad-bevel",
u"round-rectangular-callout",
u"rectangular-callout",
u"round-callout",
u"cloud-callout",
u"line-callout-1",
u"line-callout-2",
u"line-callout-3",
u"paper",
u"vertical-scroll",
u"horizontal-scroll",
u"mso-spt34",
u"mso-spt75",
u"mso-spt164",
u"mso-spt180",
u"flowchart-process",
u"flowchart-alternate-process",
u"flowchart-decision",
u"flowchart-data",
u"flowchart-predefined-process",
u"flowchart-internal-storage",
u"flowchart-document",
u"flowchart-multidocument",
u"flowchart-terminator",
u"flowchart-preparation",
u"flowchart-manual-input",
u"flowchart-manual-operation",
u"flowchart-connector",
u"flowchart-off-page-connector",
u"flowchart-card",
u"flowchart-punched-tape",
u"flowchart-summing-junction",
u"flowchart-or",
u"flowchart-collate",
u"flowchart-sort",
u"flowchart-extract",
u"flowchart-merge",
u"flowchart-stored-data",
u"flowchart-delay",
u"flowchart-sequential-access",
u"flowchart-magnetic-disk",
u"flowchart-direct-access-storage",
u"flowchart-display"
});
constexpr frozen::set<std::u16string_view, 5> constAllowSet(
{
u"heart",
u"puzzle",
u"col-60da8460",
u"col-502ad400",
u"sinusoid"
});
} // end anonymous namespace
static bool lcl_IsOnDenylist(OUString const & rShapeType)
{
return constDenySet.find(rShapeType) != constDenySet.end();
}
static bool lcl_IsOnAllowlist(OUString const & rShapeType)
{
return constAllowSet.find(rShapeType) != constAllowSet.end();
}
static bool lcl_GetHandlePosition( sal_Int32 &nValue, const EnhancedCustomShapeParameter &rParam, const Sequence< EnhancedCustomShapeAdjustmentValue > &rSeq)
{
bool bAdj = false;
if ( rParam.Value.getValueTypeClass() == TypeClass_DOUBLE )
{
double fValue(0.0);
if ( rParam.Value >>= fValue )
nValue = static_cast<sal_Int32>(fValue);
}
else
rParam.Value >>= nValue;
if ( rParam.Type == EnhancedCustomShapeParameterType::ADJUSTMENT)
{
bAdj = true;
sal_Int32 nIdx = nValue;
if ( nIdx < rSeq.getLength() )
{
if ( rSeq[ nIdx ] .Value.getValueTypeClass() == TypeClass_DOUBLE )
{
double fValue(0.0);
rSeq[ nIdx ].Value >>= fValue;
nValue = fValue;
}
else
{
rSeq[ nIdx ].Value >>= nValue;
}
}
}
return bAdj;
}
static void lcl_AnalyzeHandles( const uno::Sequence<beans::PropertyValues> & rHandles,
std::vector< std::pair< sal_Int32, sal_Int32> > &rHandlePositionList,
const Sequence< EnhancedCustomShapeAdjustmentValue > &rSeq)
{
for ( const Sequence< PropertyValue >& rPropSeq : rHandles )
{
static constexpr OUStringLiteral sPosition( u"Position" );
bool bPosition = false;
EnhancedCustomShapeParameterPair aPosition;
for ( const PropertyValue& rPropVal: rPropSeq )
{
if ( rPropVal.Name == sPosition )
{
if ( rPropVal.Value >>= aPosition )
bPosition = true;
}
}
if ( bPosition )
{
sal_Int32 nXPosition = 0;
sal_Int32 nYPosition = 0;
// For polar handles, nXPosition is radius and nYPosition is angle
lcl_GetHandlePosition( nXPosition, aPosition.First , rSeq );
lcl_GetHandlePosition( nYPosition, aPosition.Second, rSeq );
rHandlePositionList.emplace_back( nXPosition, nYPosition );
}
}
}
static void lcl_AppendAdjustmentValue( std::vector< std::pair< sal_Int32, sal_Int32> > &rAvList, sal_Int32 nAdjIdx, sal_Int32 nValue )
{
rAvList.emplace_back( nAdjIdx , nValue );
}
static sal_Int32 lcl_NormalizeAngle( sal_Int32 nAngle )
{
nAngle = nAngle % 360;
return nAngle < 0 ? ( nAngle + 360 ) : nAngle ;
}
static sal_Int32 lcl_CircleAngle2CustomShapeEllipseAngleOOX(const sal_Int32 nInternAngle, const sal_Int32 nWidth, const sal_Int32 nHeight)
{
if (nWidth != 0 || nHeight != 0)
{
double fAngle = basegfx::deg2rad<100>(nInternAngle); // intern 1/100 deg to rad
fAngle = atan2(nHeight * sin(fAngle), nWidth * cos(fAngle)); // circle to ellipse
fAngle = basegfx::rad2deg<60000>(fAngle); // rad to OOXML angle unit
sal_Int32 nAngle = basegfx::fround(fAngle); // normalize
nAngle = nAngle % 21600000;
return nAngle < 0 ? (nAngle + 21600000) : nAngle;
}
else // should be handled by caller, dummy value
return 0;
}
static OUString lcl_GetTarget(const css::uno::Reference<css::frame::XModel>& xModel,
std::u16string_view rURL)
{
Reference<drawing::XDrawPagesSupplier> xDPS(xModel, uno::UNO_QUERY_THROW);
Reference<drawing::XDrawPages> xDrawPages(xDPS->getDrawPages(), uno::UNO_SET_THROW);
sal_uInt32 nPageCount = xDrawPages->getCount();
OUString sTarget;
for (sal_uInt32 i = 0; i < nPageCount; ++i)
{
Reference<XDrawPage> xDrawPage;
xDrawPages->getByIndex(i) >>= xDrawPage;
Reference<container::XNamed> xNamed(xDrawPage, UNO_QUERY);
if (!xNamed)
continue;
OUString sSlideName = "#" + xNamed->getName();
if (rURL == sSlideName)
{
sTarget = "slide" + OUString::number(i + 1) + ".xml";
break;
}
}
return sTarget;
}
ShapeExport& ShapeExport::WriteCustomShape( const Reference< XShape >& xShape )
{
SAL_INFO("oox.shape", "write custom shape");
Reference< XPropertySet > rXPropSet( xShape, UNO_QUERY );
// First check, if this is a Fontwork-shape. For DrawingML, such a shape is a
// TextBox shape with body property prstTxWarp.
if (IsFontworkShape(rXPropSet))
{
ShapeExport::WriteTextShape(xShape); // qualifier to prevent PowerPointShapeExport
return *this;
}
bool bHasGeometrySeq(false);
Sequence< PropertyValue > aGeometrySeq;
OUString sShapeType(u"non-primitive"_ustr); // default in ODF
if (GetProperty(rXPropSet, u"CustomShapeGeometry"_ustr))
{
SAL_INFO("oox.shape", "got custom shape geometry");
if (mAny >>= aGeometrySeq)
{
bHasGeometrySeq = true;
SAL_INFO("oox.shape", "got custom shape geometry sequence");
for (const PropertyValue& rProp : aGeometrySeq)
{
SAL_INFO("oox.shape", "geometry property: " << rProp.Name);
if (rProp.Name == "Type")
rProp.Value >>= sShapeType;
}
}
}
bool bPredefinedHandlesUsed = true;
bool bHasHandles = false;
ShapeFlag nMirrorFlags = ShapeFlag::NONE;
MSO_SPT eShapeType = EscherPropertyContainer::GetCustomShapeType( xShape, nMirrorFlags, sShapeType );
assert(dynamic_cast< SdrObjCustomShape* >(SdrObject::getSdrObjectFromXShape(xShape)) && "Not a SdrObjCustomShape (!)");
SdrObjCustomShape& rSdrObjCustomShape(static_cast< SdrObjCustomShape& >(*SdrObject::getSdrObjectFromXShape(xShape)));
const bool bIsDefaultObject(
EscherPropertyContainer::IsDefaultObject(
rSdrObjCustomShape,
eShapeType));
OString sPresetShape = msfilter::util::GetOOXMLPresetGeometry(sShapeType);
SAL_INFO("oox.shape", "custom shape type: " << sShapeType << " ==> " << sPresetShape);
sal_Int32 nAdjustmentValuesIndex = -1;
awt::Rectangle aViewBox;
uno::Sequence<beans::PropertyValues> aHandles;
bool bFlipH = false;
bool bFlipV = false;
if (bHasGeometrySeq)
{
for (int i = 0; i < aGeometrySeq.getLength(); i++)
{
const PropertyValue& rProp = aGeometrySeq[ i ];
SAL_INFO("oox.shape", "geometry property: " << rProp.Name);
if ( rProp.Name == "MirroredX" )
rProp.Value >>= bFlipH;
if ( rProp.Name == "MirroredY" )
rProp.Value >>= bFlipV;
if ( rProp.Name == "AdjustmentValues" )
nAdjustmentValuesIndex = i;
else if ( rProp.Name == "Handles" )
{
rProp.Value >>= aHandles;
if ( aHandles.hasElements() )
bHasHandles = true;
if( !bIsDefaultObject )
bPredefinedHandlesUsed = false;
// TODO: update nAdjustmentsWhichNeedsToBeConverted here
}
else if ( rProp.Name == "ViewBox" )
rProp.Value >>= aViewBox;
}
}
FSHelperPtr pFS = GetFS();
// non visual shape properties
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
// get InteropGrabBag to export attributes stored in the grabbag
uno::Sequence<beans::PropertyValue> aGrabBagProps;
rXPropSet->getPropertyValue(u"InteropGrabBag"_ustr) >>= aGrabBagProps;
bool bUseBackground = false;
if (GetProperty(rXPropSet, u"FillUseSlideBackground"_ustr))
mAny >>= bUseBackground;
if (bUseBackground)
mpFS->startElementNS(mnXmlNamespace, XML_sp, XML_useBgFill, "1");
else
{
rtl::Reference<sax_fastparser::FastAttributeList> pAttrListSp
= sax_fastparser::FastSerializerHelper::createAttrList();
for (auto const& it : aGrabBagProps)
{
// export macro attribute of <sp> element
if (it.Name == u"mso-sp-macro"_ustr)
{
OUString sMacro;
it.Value >>= sMacro;
if (!sMacro.isEmpty())
pAttrListSp->add(XML_macro, sMacro);
}
// export textlink attribute of <sp> element
if (it.Name == u"mso-sp-textlink"_ustr)
{
OUString sTextLink;
it.Value >>= sTextLink;
if (!sTextLink.isEmpty())
pAttrListSp->add(XML_textlink, sTextLink);
}
// export fLocksText attribute of <sp> element
if (it.Name == u"mso-sp-fLocksText"_ustr)
{
bool bFLocksText = true; // default="true"
it.Value >>= bFLocksText;
pAttrListSp->add(XML_fLocksText, ToPsz10(bFLocksText));
}
// export fPublished attribute of <sp> element
if (it.Name == u"mso-sp-fPublished"_ustr)
{
bool bFPublished = false;
it.Value >>= bFPublished;
pAttrListSp->add(XML_fPublished, ToPsz10(bFPublished));
}
}
// export <sp> element (with a namespace prefix)
mpFS->startElementNS(mnXmlNamespace, XML_sp, pAttrListSp);
}
bool isVisible = true ;
if( GetProperty(rXPropSet, u"Visible"_ustr))
{
mAny >>= isVisible;
}
pFS->startElementNS( mnXmlNamespace, XML_nvSpPr );
// export descr attribute of <cNvPr> element
OUString sDescr;
if (GetProperty(rXPropSet, u"Description"_ustr))
mAny >>= sDescr;
// export title attribute of <cNvPr> element
OUString sTitle;
if (GetProperty(rXPropSet, u"Title"_ustr))
mAny >>= sTitle;
// export <cNvPr> element
pFS->startElementNS(
mnXmlNamespace, XML_cNvPr, XML_id,
OString::number(GetShapeID(xShape) == -1 ? GetNewShapeID(xShape) : GetShapeID(xShape)),
XML_name, GetShapeName(xShape), XML_hidden, sax_fastparser::UseIf("1", !isVisible),
XML_descr, sax_fastparser::UseIf(sDescr, !sDescr.isEmpty()), XML_title,
sax_fastparser::UseIf(sTitle, !sTitle.isEmpty()));
rtl::Reference<sax_fastparser::FastAttributeList> pAttrListHlinkClick
= sax_fastparser::FastSerializerHelper::createAttrList();
for (auto const& it : aGrabBagProps)
{
// export tooltip attribute of <hlinkClick> element
if (it.Name == u"mso-hlinkClick-tooltip"_ustr)
{
OUString sTooltip;
it.Value >>= sTooltip;
if (!sTooltip.isEmpty())
pAttrListHlinkClick->add(XML_tooltip, sTooltip);
}
}
if( GetProperty(rXPropSet, u"URL"_ustr) )
{
OUString sURL;
mAny >>= sURL;
if( !sURL.isEmpty() )
{
OUString sRelId = mpFB->addRelation( mpFS->getOutputStream(),
oox::getRelationship(Relationship::HYPERLINK),
mpURLTransformer->getTransformedString(sURL),
mpURLTransformer->isExternalURL(sURL));
mpFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), sRelId);
// pAttrListHlinkClick->add(FSNS(XML_r, XML_id), sRelId);
}
}
// // export <hlinkClick> element
// mpFS->singleElementNS(XML_a, XML_hlinkClick, pAttrListHlinkClick);
OUString sBookmark;
if (GetProperty(rXPropSet, u"Bookmark"_ustr))
mAny >>= sBookmark;
if (GetProperty(rXPropSet, u"OnClick"_ustr))
{
OUString sPPAction;
presentation::ClickAction eClickAction = presentation::ClickAction_NONE;
mAny >>= eClickAction;
if (eClickAction != presentation::ClickAction_NONE)
{
switch (eClickAction)
{
case presentation::ClickAction_STOPPRESENTATION:
sPPAction = "ppaction://hlinkshowjump?jump=endshow";
break;
case presentation::ClickAction_NEXTPAGE:
sPPAction = "ppaction://hlinkshowjump?jump=nextslide";
break;
case presentation::ClickAction_LASTPAGE:
sPPAction = "ppaction://hlinkshowjump?jump=lastslide";
break;
case presentation::ClickAction_PREVPAGE:
sPPAction = "ppaction://hlinkshowjump?jump=previousslide";
break;
case presentation::ClickAction_FIRSTPAGE:
sPPAction = "ppaction://hlinkshowjump?jump=firstslide";
break;
case presentation::ClickAction_BOOKMARK:
sBookmark = "#" + sBookmark;
break;
default:
break;
}
}
if (!sPPAction.isEmpty())
pFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), "", XML_action,
sPPAction);
}
if (!sBookmark.isEmpty())
{
bool bExtURL = URLTransformer().isExternalURL(sBookmark);
sBookmark = bExtURL ? sBookmark : lcl_GetTarget(GetFB()->getModel(), sBookmark);
OUString sRelId
= mpFB->addRelation(mpFS->getOutputStream(),
bExtURL ? oox::getRelationship(Relationship::HYPERLINK)
: oox::getRelationship(Relationship::SLIDE),
sBookmark, bExtURL);
if (bExtURL)
mpFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), sRelId);
else
mpFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), sRelId,
XML_action, "ppaction://hlinksldjump");
}
AddExtLst(pFS, rXPropSet);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
pFS->singleElementNS(mnXmlNamespace, XML_cNvSpPr);
WriteNonVisualProperties( xShape );
pFS->endElementNS( mnXmlNamespace, XML_nvSpPr );
}
else
{
pFS->startElementNS(mnXmlNamespace, XML_wsp);
if (m_xParent.is())
{
pFS->startElementNS(mnXmlNamespace, XML_cNvPr, XML_id,
OString::number(GetShapeID(xShape) == -1 ? GetNewShapeID(xShape)
: GetShapeID(xShape)),
XML_name, GetShapeName(xShape));
if (GetProperty(rXPropSet, u"Hyperlink"_ustr))
{
OUString sURL;
mAny >>= sURL;
if (!sURL.isEmpty())
{
OUString sRelId = mpFB->addRelation(
mpFS->getOutputStream(), oox::getRelationship(Relationship::HYPERLINK),
mpURLTransformer->getTransformedString(sURL),
mpURLTransformer->isExternalURL(sURL));
mpFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), sRelId);
}
}
AddExtLst(pFS, rXPropSet);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
}
pFS->singleElementNS(mnXmlNamespace, XML_cNvSpPr);
}
// visual shape properties
pFS->startElementNS(mnXmlNamespace, XML_spPr);
// we export non-primitive shapes to custom geometry
// we also export non-ooxml shapes which have handles/equations to custom geometry, because
// we cannot convert ODF equations to DrawingML equations. TODO: see what binary DOC export filter does.
// but our WritePolyPolygon()/WriteCustomGeometry() functions are incomplete, therefore we use a denylist
// we use a allowlist for shapes where mapping to MSO preset shape is not optimal
bool bCustGeom = true;
bool bOnDenylist = false;
if( sShapeType == "ooxml-non-primitive" )
bCustGeom = true;
else if( sShapeType.startsWith("ooxml") )
bCustGeom = false;
else if( lcl_IsOnAllowlist(sShapeType) )
bCustGeom = true;
else if( lcl_IsOnDenylist(sShapeType) )
{
bCustGeom = false;
bOnDenylist = true;
}
bool bPresetWriteSuccessful = false;
// Let the custom shapes what has name and preset information in OOXML, to be written
// as preset ones with parameters. Try that with this converter class.
if (!sShapeType.startsWith("ooxml") && sShapeType != "non-primitive" && !mbUserShapes
&& xShape->getShapeType() == "com.sun.star.drawing.CustomShape"
&& !lcl_IsOnAllowlist(sShapeType))
{
DMLPresetShapeExporter aCustomShapeConverter(this, xShape);
bPresetWriteSuccessful = aCustomShapeConverter.WriteShape();
}
// If preset writing has problems try to write the shape as it done before
if (bPresetWriteSuccessful)
;// Already written do nothing.
else if (bCustGeom)
{
WriteShapeTransformation( xShape, XML_a, bFlipH, bFlipV );
bool bSuccess = WriteCustomGeometry(xShape, rSdrObjCustomShape);
// In case of Writer, the parent element is <wps:spPr>, and there the <a:custGeom> element
// is not optional.
if (!bSuccess && GetDocumentType() == DOCUMENT_DOCX)
{
WriteEmptyCustomGeometry();
}
}
else if (bOnDenylist && bHasHandles && nAdjustmentValuesIndex !=-1 && !sShapeType.startsWith("mso-spt"))
{
WriteShapeTransformation( xShape, XML_a, bFlipH, bFlipV );
Sequence< EnhancedCustomShapeAdjustmentValue > aAdjustmentSeq;
std::vector< std::pair< sal_Int32, sal_Int32> > aHandlePositionList;
std::vector< std::pair< sal_Int32, sal_Int32> > aAvList;
aGeometrySeq[ nAdjustmentValuesIndex ].Value >>= aAdjustmentSeq ;
lcl_AnalyzeHandles( aHandles, aHandlePositionList, aAdjustmentSeq );
sal_Int32 nXPosition = 0;
sal_Int32 nYPosition = 0;
if ( !aHandlePositionList.empty() )
{
nXPosition = aHandlePositionList[0].first ;
nYPosition = aHandlePositionList[0].second ;
}
switch( eShapeType )
{
case mso_sptBorderCallout1:
{
sal_Int32 adj3 = double(nYPosition)/aViewBox.Height *100000;
sal_Int32 adj4 = double(nXPosition)/aViewBox.Width *100000;
lcl_AppendAdjustmentValue( aAvList, 1, 18750 );
lcl_AppendAdjustmentValue( aAvList, 2, -8333 );
lcl_AppendAdjustmentValue( aAvList, 3, adj3 );
lcl_AppendAdjustmentValue( aAvList, 4, adj4 );
break;
}
case mso_sptBorderCallout2:
{
sal_Int32 adj5 = double(nYPosition)/aViewBox.Height *100000;
sal_Int32 adj6 = double(nXPosition)/aViewBox.Width *100000;
sal_Int32 adj3 = 18750;
sal_Int32 adj4 = -16667;
lcl_AppendAdjustmentValue( aAvList, 1, 18750 );
lcl_AppendAdjustmentValue( aAvList, 2, -8333 );
if ( aHandlePositionList.size() > 1 )
{
nXPosition = aHandlePositionList[1].first ;
nYPosition = aHandlePositionList[1].second ;
adj3 = double(nYPosition)/aViewBox.Height *100000;
adj4 = double(nXPosition)/aViewBox.Width *100000;
}
lcl_AppendAdjustmentValue( aAvList, 3, adj3 );
lcl_AppendAdjustmentValue( aAvList, 4, adj4 );
lcl_AppendAdjustmentValue( aAvList, 5, adj5 );
lcl_AppendAdjustmentValue( aAvList, 6, adj6 );
break;
}
case mso_sptWedgeRectCallout:
case mso_sptWedgeRRectCallout:
case mso_sptWedgeEllipseCallout:
case mso_sptCloudCallout:
{
sal_Int32 adj1 = (double(nXPosition)/aViewBox.Width -0.5) *100000;
sal_Int32 adj2 = (double(nYPosition)/aViewBox.Height -0.5) *100000;
lcl_AppendAdjustmentValue( aAvList, 1, adj1 );
lcl_AppendAdjustmentValue( aAvList, 2, adj2 );
if ( eShapeType == mso_sptWedgeRRectCallout)
{
lcl_AppendAdjustmentValue( aAvList, 3, 16667);
}
break;
}
case mso_sptFoldedCorner:
{
sal_Int32 adj = double( aViewBox.Width - nXPosition) / std::min( aViewBox.Width,aViewBox.Height ) * 100000;
lcl_AppendAdjustmentValue( aAvList, 0, adj );
break;
}
case mso_sptDonut:
case mso_sptSun:
case mso_sptMoon:
case mso_sptNoSmoking:
case mso_sptHorizontalScroll:
case mso_sptBevel:
case mso_sptBracketPair:
{
sal_Int32 adj = double( nXPosition )/aViewBox.Width*100000 ;
lcl_AppendAdjustmentValue( aAvList, 0, adj );
break;
}
case mso_sptCan:
case mso_sptCube:
case mso_sptBracePair:
case mso_sptVerticalScroll:
{
sal_Int32 adj = double( nYPosition )/aViewBox.Height *100000 ;
lcl_AppendAdjustmentValue( aAvList, 0, adj );
break;
}
case mso_sptSmileyFace:
{
sal_Int32 adj = double( nYPosition )/aViewBox.Height *100000 - 76458.0;
lcl_AppendAdjustmentValue( aAvList, 0, adj );
break;
}
case mso_sptBlockArc:
{
sal_Int32 nRadius = 50000 * ( 1 - double(nXPosition) / 10800);
sal_Int32 nAngleStart = lcl_NormalizeAngle( nYPosition );
sal_Int32 nAngleEnd = lcl_NormalizeAngle( 180 - nAngleStart );
lcl_AppendAdjustmentValue( aAvList, 1, 21600000 / 360 * nAngleStart );
lcl_AppendAdjustmentValue( aAvList, 2, 21600000 / 360 * nAngleEnd );
lcl_AppendAdjustmentValue( aAvList, 3, nRadius );
break;
}
// case mso_sptNil:
// case mso_sptBentConnector3:
// case mso_sptBorderCallout3:
default:
{
if ( sPresetShape == "frame" )
{
sal_Int32 adj1 = double( nYPosition )/aViewBox.Height *100000 ;
lcl_AppendAdjustmentValue( aAvList, 1, adj1 );
}
break;
}
}
WritePresetShape( sPresetShape , aAvList );
}
else // preset geometry
{
WriteShapeTransformation( xShape, XML_a, bFlipH, bFlipV );
if( nAdjustmentValuesIndex != -1 )
{
WritePresetShape( sPresetShape, eShapeType, bPredefinedHandlesUsed,
aGeometrySeq[ nAdjustmentValuesIndex ] );
}
else
WritePresetShape( sPresetShape );
}
if( rXPropSet.is() )
{
WriteFill(rXPropSet, xShape->getSize());
WriteOutline( rXPropSet );
WriteShapeEffects( rXPropSet );
bool bHas3DEffectinShape = false;
uno::Sequence<beans::PropertyValue> grabBag;
rXPropSet->getPropertyValue(u"InteropGrabBag"_ustr) >>= grabBag;
for (auto const& it : grabBag)
if (it.Name == "3DEffectProperties")
bHas3DEffectinShape = true;
if( bHas3DEffectinShape)
Write3DEffects( rXPropSet, /*bIsText=*/false );
}
pFS->endElementNS( mnXmlNamespace, XML_spPr );
pFS->startElementNS(mnXmlNamespace, XML_style);
WriteShapeStyle( rXPropSet );
pFS->endElementNS( mnXmlNamespace, XML_style );
// write text
WriteTextBox( xShape, mnXmlNamespace );
pFS->endElementNS( mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp) );
return *this;
}
ShapeExport& ShapeExport::WriteEllipseShape( const Reference< XShape >& xShape )
{
SAL_INFO("oox.shape", "write ellipse shape");
FSHelperPtr pFS = GetFS();
pFS->startElementNS(mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp));
// TODO: connector ?
Reference<XPropertySet> const xProps(xShape, UNO_QUERY);
// non visual shape properties
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
pFS->startElementNS(mnXmlNamespace, XML_nvSpPr);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
AddExtLst(pFS, xProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
pFS->singleElementNS( mnXmlNamespace, XML_cNvSpPr );
WriteNonVisualProperties( xShape );
pFS->endElementNS( mnXmlNamespace, XML_nvSpPr );
}
else
pFS->singleElementNS(mnXmlNamespace, XML_cNvSpPr);
CircleKind eCircleKind(CircleKind_FULL);
if (xProps.is())
xProps->getPropertyValue(u"CircleKind"_ustr ) >>= eCircleKind;
// visual shape properties
pFS->startElementNS( mnXmlNamespace, XML_spPr );
WriteShapeTransformation( xShape, XML_a );
if (CircleKind_FULL == eCircleKind)
WritePresetShape("ellipse"_ostr);
else
{
sal_Int32 nStartAngleIntern(9000);
sal_Int32 nEndAngleIntern(0);
if (xProps.is())
{
xProps->getPropertyValue(u"CircleStartAngle"_ustr ) >>= nStartAngleIntern;
xProps->getPropertyValue(u"CircleEndAngle"_ustr) >>= nEndAngleIntern;
}
std::vector< std::pair<sal_Int32,sal_Int32>> aAvList;
awt::Size aSize = xShape->getSize();
if (aSize.Width != 0 || aSize.Height != 0)
{
// Our arc has 90° up, OOXML has 90° down, so mirror it.
// API angles are 1/100 degree.
sal_Int32 nStartAngleOOXML(lcl_CircleAngle2CustomShapeEllipseAngleOOX(36000 - nEndAngleIntern, aSize.Width, aSize.Height));
sal_Int32 nEndAngleOOXML(lcl_CircleAngle2CustomShapeEllipseAngleOOX(36000 - nStartAngleIntern, aSize.Width, aSize.Height));
lcl_AppendAdjustmentValue( aAvList, 1, nStartAngleOOXML);
lcl_AppendAdjustmentValue( aAvList, 2, nEndAngleOOXML);
}
switch (eCircleKind)
{
case CircleKind_ARC :
WritePresetShape("arc"_ostr, aAvList);
break;
case CircleKind_SECTION :
WritePresetShape("pie"_ostr, aAvList);
break;
case CircleKind_CUT :
WritePresetShape("chord"_ostr, aAvList);
break;
default :
WritePresetShape("ellipse"_ostr);
}
}
if( xProps.is() )
{
if (CircleKind_ARC == eCircleKind)
{
// An arc in ODF is never filled, even if a fill style other than
// "none" is set. OOXML arc can be filled, so set fill explicit to
// NONE, otherwise some hidden or inherited filling is shown.
FillStyle eFillStyle(FillStyle_NONE);
uno::Any aNewValue;
aNewValue <<= eFillStyle;
xProps->setPropertyValue(u"FillStyle"_ustr, aNewValue);
}
WriteFill( xProps );
WriteOutline( xProps );
}
pFS->endElementNS( mnXmlNamespace, XML_spPr );
// write text
WriteTextBox( xShape, mnXmlNamespace );
pFS->endElementNS( mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp) );
return *this;
}
ShapeExport& ShapeExport::WriteGraphicObjectShape( const Reference< XShape >& xShape )
{
WriteGraphicObjectShapePart( xShape );
return *this;
}
void ShapeExport::WriteGraphicObjectShapePart( const Reference< XShape >& xShape, const Graphic* pGraphic )
{
SAL_INFO("oox.shape", "write graphic object shape");
if (IsNonEmptySimpleText(xShape))
{
SAL_INFO("oox.shape", "graphicObject: wrote only text");
WriteTextShape(xShape);
return;
}
SAL_INFO("oox.shape", "graphicObject without text");
uno::Reference<graphic::XGraphic> xGraphic;
OUString sMediaURL;
Reference< XPropertySet > xShapeProps( xShape, UNO_QUERY );
if (pGraphic)
{
xGraphic.set(pGraphic->GetXGraphic());
}
else if (xShapeProps.is() && xShapeProps->getPropertySetInfo()->hasPropertyByName(u"Graphic"_ustr))
{
xShapeProps->getPropertyValue(u"Graphic"_ustr) >>= xGraphic;
}
// tdf#155903 Only for PPTX, Microsoft does not support this feature in Word and Excel.
bool bHasMediaURL = GetDocumentType() == DOCUMENT_PPTX && xShapeProps.is()
&& xShapeProps->getPropertySetInfo()->hasPropertyByName(u"MediaURL"_ustr)
&& (xShapeProps->getPropertyValue(u"MediaURL"_ustr) >>= sMediaURL);
if (!xGraphic.is() && !bHasMediaURL)
{
SAL_INFO("oox.shape", "no graphic or media URL found");
return;
}
FSHelperPtr pFS = GetFS();
XmlFilterBase* pFB = GetFB();
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
pFS->startElementNS(mnXmlNamespace, XML_pic);
else
pFS->startElementNS(mnXmlNamespace, XML_pic,
FSNS(XML_xmlns, XML_pic), pFB->getNamespaceURL(OOX_NS(dmlPicture)));
pFS->startElementNS(mnXmlNamespace, XML_nvPicPr);
presentation::ClickAction eClickAction = presentation::ClickAction_NONE;
OUString sDescr, sURL, sBookmark, sPPAction;
bool bHaveDesc;
if ( ( bHaveDesc = GetProperty( xShapeProps, u"Description"_ustr ) ) )
mAny >>= sDescr;
if ( GetProperty( xShapeProps, u"URL"_ustr ) )
mAny >>= sURL;
if (GetProperty(xShapeProps, u"Bookmark"_ustr))
mAny >>= sBookmark;
if (GetProperty(xShapeProps, u"OnClick"_ustr))
mAny >>= eClickAction;
pFS->startElementNS( mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape),
XML_descr, sax_fastparser::UseIf(sDescr, bHaveDesc));
if (eClickAction != presentation::ClickAction_NONE)
{
switch (eClickAction)
{
case presentation::ClickAction_STOPPRESENTATION:
sPPAction = "ppaction://hlinkshowjump?jump=endshow";
break;
case presentation::ClickAction_NEXTPAGE:
sPPAction = "ppaction://hlinkshowjump?jump=nextslide";
break;
case presentation::ClickAction_LASTPAGE:
sPPAction = "ppaction://hlinkshowjump?jump=lastslide";
break;
case presentation::ClickAction_PREVPAGE:
sPPAction = "ppaction://hlinkshowjump?jump=previousslide";
break;
case presentation::ClickAction_FIRSTPAGE:
sPPAction = "ppaction://hlinkshowjump?jump=firstslide";
break;
case presentation::ClickAction_BOOKMARK:
sBookmark = "#" + sBookmark;
break;
default:
break;
}
}
// OOXTODO: //cNvPr children: XML_extLst, XML_hlinkHover
if (bHasMediaURL || !sPPAction.isEmpty())
pFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), "", XML_action,
bHasMediaURL ? u"ppaction://media"_ustr : sPPAction);
if( !sURL.isEmpty() )
{
OUString sRelId = mpFB->addRelation( mpFS->getOutputStream(),
oox::getRelationship(Relationship::HYPERLINK),
mpURLTransformer->getTransformedString(sURL),
mpURLTransformer->isExternalURL(sURL));
mpFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), sRelId);
}
if (!sBookmark.isEmpty())
{
bool bExtURL = URLTransformer().isExternalURL(sBookmark);
sBookmark = bExtURL ? sBookmark : lcl_GetTarget(GetFB()->getModel(), sBookmark);
OUString sRelId = mpFB->addRelation(mpFS->getOutputStream(),
bExtURL ? oox::getRelationship(Relationship::HYPERLINK)
: oox::getRelationship(Relationship::SLIDE),
sBookmark, bExtURL);
if (bExtURL)
mpFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), sRelId);
else
mpFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), sRelId, XML_action,
"ppaction://hlinksldjump");
}
AddExtLst(pFS, xShapeProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
pFS->singleElementNS(mnXmlNamespace, XML_cNvPicPr
// OOXTODO: XML_preferRelativeSize
);
if (bHasMediaURL)
WriteMediaNonVisualProperties(xShape);
else
WriteNonVisualProperties(xShape);
pFS->endElementNS( mnXmlNamespace, XML_nvPicPr );
pFS->startElementNS(mnXmlNamespace, XML_blipFill);
if (xGraphic.is())
{
WriteXGraphicBlip(xShapeProps, xGraphic, mbUserShapes);
}
else if (bHasMediaURL)
{
Reference<graphic::XGraphic> xFallbackGraphic;
if (xShapeProps->getPropertySetInfo()->hasPropertyByName(u"FallbackGraphic"_ustr))
xShapeProps->getPropertyValue(u"FallbackGraphic"_ustr) >>= xFallbackGraphic;
WriteXGraphicBlip(xShapeProps, xFallbackGraphic, mbUserShapes);
}
if (xGraphic.is())
{
WriteSrcRectXGraphic(xShapeProps, xGraphic);
}
// now we stretch always when we get pGraphic (when changing that
// behavior, test n#780830 for regression, where the OLE sheet might get tiled
bool bStretch = false;
if( !pGraphic && GetProperty( xShapeProps, u"FillBitmapStretch"_ustr ) )
mAny >>= bStretch;
if ( pGraphic || bStretch )
pFS->singleElementNS(XML_a, XML_stretch);
if (bHasMediaURL)
{
// Graphic of media shapes is always stretched.
pFS->startElementNS(XML_a, XML_stretch);
pFS->singleElementNS(XML_a, XML_fillRect);
pFS->endElementNS(XML_a, XML_stretch);
}
pFS->endElementNS( mnXmlNamespace, XML_blipFill );
// visual shape properties
pFS->startElementNS(mnXmlNamespace, XML_spPr);
bool bFlipH = false;
if( xShapeProps->getPropertySetInfo()->hasPropertyByName(u"IsMirrored"_ustr) )
{
xShapeProps->getPropertyValue(u"IsMirrored"_ustr) >>= bFlipH;
}
WriteShapeTransformation( xShape, XML_a, bFlipH, false, false, false, true );
WritePresetShape( "rect"_ostr );
WriteFill(xShapeProps);
// graphic object can come with the frame (bnc#654525)
WriteOutline( xShapeProps );
WriteShapeEffects( xShapeProps );
Write3DEffects( xShapeProps, /*bIsText=*/false );
pFS->endElementNS( mnXmlNamespace, XML_spPr );
pFS->endElementNS( mnXmlNamespace, XML_pic );
}
static void lcl_Rotate(sal_Int32 nAngle, Point center, awt::Point& pt)
{
sal_Int16 nCos, nSin;
switch (nAngle)
{
case 90:
nCos = 0;
nSin = 1;
break;
case 180:
nCos = -1;
nSin = 0;
break;
case 270:
nCos = 0;
nSin = -1;
break;
default:
return;
}
sal_Int32 x = pt.X - center.X();
sal_Int32 y = pt.Y - center.Y();
pt.X = center.X() + x * nCos - y * nSin;
pt.Y = center.Y() + y * nCos + x * nSin;
}
static void lcl_FlipHFlipV(const tools::Polygon& rPoly, sal_Int32 nAngle, bool& rFlipH, bool& rFlipV)
{
Point aStart = rPoly[0];
Point aEnd = rPoly[rPoly.GetSize() - 1];
if (aStart.X() > aEnd.X() && aStart.Y() > aEnd.Y())
{
if (nAngle)
{
if (nAngle == 90)
rFlipH = true;
if (nAngle == 270)
rFlipV = true;
}
else // 0°
{
rFlipH = true;
rFlipV = true;
}
}
if (aStart.X() < aEnd.X() && aStart.Y() < aEnd.Y())
{
if (nAngle)
{
if (nAngle != 270)
{
rFlipH = true;
rFlipV = true;
}
else
rFlipH = true;
}
}
if (aStart.Y() < aEnd.Y() && aStart.X() > aEnd.X())
{
if (nAngle)
{
if (nAngle == 180)
rFlipV = true;
if (nAngle == 270)
{
rFlipV = true;
rFlipH = true;
}
}
else // 0°
{
rFlipH = true;
}
}
if (aStart.Y() > aEnd.Y() && aStart.X() < aEnd.X())
{
if (nAngle)
{
if (nAngle == 90)
{
rFlipH = true;
rFlipV = true;
}
if (nAngle == 180)
rFlipH = true;
}
else // 0°
rFlipV = true;
}
}
static sal_Int32 lcl_GetAngle(const tools::Polygon& rPoly)
{
sal_Int32 nAngle;
Point aStartPoint = rPoly[0];
Point aEndPoint = rPoly[rPoly.GetSize() - 1];
if (aStartPoint.X() == rPoly[1].X())
{
if ((aStartPoint.X() < aEndPoint.X() && aStartPoint.Y() > aEndPoint.Y())
|| (aStartPoint.X() > aEndPoint.X() && aStartPoint.Y() < aEndPoint.Y()))
{
nAngle = 90;
}
else
nAngle = 270;
}
else
{
if (aStartPoint.X() > rPoly[1].X())
nAngle = 180;
else
nAngle = 0;
}
return nAngle;
}
// Adjust value decide the position, where the connector should turn.
static void lcl_GetConnectorAdjustValue(const Reference<XShape>& xShape, const tools::Polygon& rPoly,
ConnectorType eConnectorType,
std::vector<std::pair<sal_Int32, sal_Int32>>& rAvList)
{
Reference<XPropertySet> xShapeProps(xShape, UNO_QUERY);
bool bIsOOXMLCurve(false);
xShapeProps->getPropertyValue(u"EdgeOOXMLCurve"_ustr) >>= bIsOOXMLCurve;
sal_Int32 nAdjCount = 0;
if (eConnectorType == ConnectorType_CURVE)
{
if (bIsOOXMLCurve)
{
nAdjCount = (rPoly.GetSize() - 4) / 3;
}
else if (rPoly.GetSize() == 4)
{
if ((rPoly[0].X() == rPoly[1].X() && rPoly[2].X() == rPoly[3].X())
|| (rPoly[0].Y() == rPoly[1].Y() && rPoly[2].Y() == rPoly[3].Y()))
{
nAdjCount = 1; // curvedConnector3, control vectors parallel
}
else
nAdjCount = 0; // curvedConnector2, control vectors orthogonal
}
else if (rPoly.GetSize() > 4)
{
if ((rPoly[2].X() == rPoly[3].X() && rPoly[3].X() == rPoly[4].X())
|| (rPoly[2].Y() == rPoly[3].Y() && rPoly[3].Y() == rPoly[4].Y()))
{
nAdjCount = 3; // curvedConnector5
}
else
nAdjCount = 2; // curvedConnector4
}
}
else
{
switch (rPoly.GetSize())
{
case 3:
nAdjCount = 0; // bentConnector2
break;
case 4:
nAdjCount = 1; // bentConnector3
break;
case 5:
nAdjCount = 2; // bentConnector4
break;
case 6:
nAdjCount = 3; // bentConnector5
break;
}
}
if (nAdjCount)
{
sal_Int32 nAdjustValue;
Point aStart = rPoly[0];
Point aEnd = rPoly[rPoly.GetSize() - 1];
for (sal_Int32 i = 1; i <= nAdjCount; ++i)
{
Point aPt = rPoly[i];
if (aEnd.Y() == aStart.Y())
aEnd.setY(aStart.Y() + 1);
if (aEnd.X() == aStart.X())
aEnd.setX(aStart.X() + 1);
bool bVertical = rPoly[1].X() - aStart.X() != 0 ? true : false;
// vertical and horizon alternate
if (i % 2 == 1)
bVertical = !bVertical;
if (eConnectorType == ConnectorType_CURVE)
{
if (bIsOOXMLCurve)
{
aPt = rPoly[3 * i];
}
else
{
awt::Size aSize = xShape->getSize();
awt::Point aShapePosition = xShape->getPosition();
tools::Rectangle aBoundRect = rPoly.GetBoundRect();
if (bVertical)
{
if ((aBoundRect.GetSize().Height() - aSize.Height) == 1)
aPt.setY(rPoly[i + 1].Y());
else if (aStart.Y() > aPt.Y())
aPt.setY(aShapePosition.Y);
else
aPt.setY(aShapePosition.Y + aSize.Height);
}
else
{
if ((aBoundRect.GetSize().Width() - aSize.Width) == 1)
aPt.setX(rPoly[i + 1].X());
else if (aStart.X() > aPt.X())
aPt.setX(aShapePosition.X);
else
aPt.setX(aShapePosition.X + aSize.Width);
}
}
}
if (bVertical)
nAdjustValue = ((aPt.Y() - aStart.Y()) * 100000) / (aEnd.Y() - aStart.Y());
else
nAdjustValue = ((aPt.X() - aStart.X()) * 100000) / (aEnd.X() - aStart.X());
rAvList.emplace_back(i, nAdjustValue);
}
}
}
static sal_Int32 lcl_GetGluePointId(const Reference<XShape>& xShape, sal_Int32 nGluePointId)
{
if (nGluePointId > 3)
return nGluePointId - 4;
else
{
bool bFlipH = false;
bool bFlipV = false;
Reference<XPropertySet> xShapeProps(xShape, UNO_QUERY);
if (xShapeProps.is() && xShapeProps->getPropertySetInfo()
&& xShapeProps->getPropertySetInfo()->hasPropertyByName(u"CustomShapeGeometry"_ustr))
{
Sequence<PropertyValue> aGeometrySeq;
xShapeProps->getPropertyValue(u"CustomShapeGeometry"_ustr) >>= aGeometrySeq;
for (int i = 0; i < aGeometrySeq.getLength(); i++)
{
const PropertyValue& rProp = aGeometrySeq[i];
if (rProp.Name == "MirroredX")
rProp.Value >>= bFlipH;
if (rProp.Name == "MirroredY")
rProp.Value >>= bFlipV;
}
}
if ((!bFlipH && !bFlipV) || (bFlipH && bFlipV))
{
// change id of the bounding box (1 <-> 3)
if (nGluePointId == 1)
nGluePointId = 3; // Right
else if (nGluePointId == 3)
nGluePointId = 1; // Left
}
}
return nGluePointId;
}
ShapeExport& ShapeExport::WriteConnectorShape( const Reference< XShape >& xShape )
{
bool bFlipH = false;
bool bFlipV = false;
sal_Int32 nAngle = 0;
sal_Int32 nStartGlueId = 0;
sal_Int32 nEndGlueId = 0;
SAL_INFO("oox.shape", "write connector shape");
FSHelperPtr pFS = GetFS();
OUString sGeometry;
std::vector<std::pair<sal_Int32, sal_Int32>> aAdjustValueList;
Reference< XPropertySet > rXPropSet( xShape, UNO_QUERY );
Reference< XPropertyState > rXPropState( xShape, UNO_QUERY );
awt::Point aStartPoint, aEndPoint;
Reference< XShape > rXShapeA;
Reference< XShape > rXShapeB;
PropertyState eState;
ConnectorType eConnectorType = ConnectorType_STANDARD;
if (GetProperty(rXPropSet, u"EdgeKind"_ustr))
mAny >>= eConnectorType;
switch( eConnectorType ) {
case ConnectorType_CURVE:
sGeometry = "curvedConnector";
break;
case ConnectorType_LINES:
case ConnectorType_STANDARD:
sGeometry = "bentConnector";
break;
default:
case ConnectorType_LINE:
sGeometry = "straightConnector1";
break;
}
if (GetPropertyAndState( rXPropSet, rXPropState, u"EdgeStartPoint"_ustr, eState ) && eState == beans::PropertyState_DIRECT_VALUE )
{
mAny >>= aStartPoint;
if (GetPropertyAndState( rXPropSet, rXPropState, u"EdgeEndPoint"_ustr, eState ) && eState == beans::PropertyState_DIRECT_VALUE )
mAny >>= aEndPoint;
}
if (GetProperty(rXPropSet, u"EdgeStartConnection"_ustr))
mAny >>= rXShapeA;
if (GetProperty(rXPropSet, u"EdgeEndConnection"_ustr))
mAny >>= rXShapeB;
if (GetProperty(rXPropSet, u"StartGluePointIndex"_ustr))
mAny >>= nStartGlueId;
if (nStartGlueId != -1)
nStartGlueId = lcl_GetGluePointId(rXShapeA, nStartGlueId);
if (GetProperty(rXPropSet, u"EndGluePointIndex"_ustr))
mAny >>= nEndGlueId;
if (nEndGlueId != -1)
nEndGlueId = lcl_GetGluePointId(rXShapeB, nEndGlueId);
// Position is relative to group in Word, but relative to anchor of group in API.
if (GetDocumentType() == DOCUMENT_DOCX && !mbUserShapes && m_xParent.is())
{
awt::Point aParentPos = m_xParent->getPosition();
aStartPoint.X -= aParentPos.X;
aStartPoint.Y -= aParentPos.Y;
aEndPoint.X -= aParentPos.X;
aEndPoint.Y -= aParentPos.Y;
}
EscherConnectorListEntry aConnectorEntry( xShape, aStartPoint, rXShapeA, aEndPoint, rXShapeB );
if (eConnectorType != ConnectorType_LINE)
{
tools::PolyPolygon aPolyPolygon = EscherPropertyContainer::GetPolyPolygon(xShape);
if (aPolyPolygon.Count() > 0)
{
const tools::Polygon& aPoly = aPolyPolygon.GetObject(0);
lcl_GetConnectorAdjustValue(xShape, aPoly, eConnectorType, aAdjustValueList);
nAngle = lcl_GetAngle(aPoly);
lcl_FlipHFlipV(aPoly, nAngle, bFlipH, bFlipV);
if (nAngle)
{
Point center((aEndPoint.X + aStartPoint.X) / 2, (aEndPoint.Y + aStartPoint.Y) / 2);
lcl_Rotate(nAngle, center, aStartPoint);
lcl_Rotate(nAngle, center, aEndPoint);
nAngle *= 60000;
}
sGeometry = sGeometry + OUString::number(aAdjustValueList.size() + 2);
}
}
tools::Rectangle aRect( Point( aStartPoint.X, aStartPoint.Y ), Point( aEndPoint.X, aEndPoint.Y ) );
if( aRect.getOpenWidth() < 0 ) {
aRect.SetLeft(aEndPoint.X);
aRect.setWidth( aStartPoint.X - aEndPoint.X );
if (eConnectorType == ConnectorType_LINE)
bFlipH = true;
}
if( aRect.getOpenHeight() < 0 ) {
aRect.SetTop(aEndPoint.Y);
aRect.setHeight( aStartPoint.Y - aEndPoint.Y );
if (eConnectorType == ConnectorType_LINE)
bFlipV = true;
}
// tdf#99810 connector shape (cxnSp) is not valid with namespace 'wps'
const auto nShapeNode = (mnXmlNamespace == XML_wps ? XML_wsp : XML_cxnSp);
pFS->startElementNS(mnXmlNamespace, nShapeNode);
if (mnXmlNamespace == XML_wps)
{
// non visual connector shape drawing properties
pFS->singleElementNS(mnXmlNamespace, XML_cNvCnPr);
}
else
{
// non visual shape properties
pFS->startElementNS(mnXmlNamespace, XML_nvCxnSpPr);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
AddExtLst(pFS, rXPropSet);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
// non visual connector shape drawing properties
pFS->startElementNS(mnXmlNamespace, XML_cNvCxnSpPr);
if (GetShapeID(rXShapeA) == -1)
GetNewShapeID(rXShapeA);
if (GetShapeID(rXShapeB) == -1)
GetNewShapeID(rXShapeB);
WriteConnectorConnections(nStartGlueId, nEndGlueId, GetShapeID(rXShapeA), GetShapeID(rXShapeB));
pFS->endElementNS(mnXmlNamespace, XML_cNvCxnSpPr);
if (GetDocumentType() == DOCUMENT_PPTX)
pFS->singleElementNS(mnXmlNamespace, XML_nvPr);
pFS->endElementNS(mnXmlNamespace, XML_nvCxnSpPr);
}
// visual shape properties
pFS->startElementNS(mnXmlNamespace, XML_spPr);
WriteTransformation( xShape, aRect, XML_a, bFlipH, bFlipV, nAngle );
// TODO: write adjustments (ppt export doesn't work well there either)
WritePresetShape( sGeometry.toUtf8(), aAdjustValueList);
Reference< XPropertySet > xShapeProps( xShape, UNO_QUERY );
if( xShapeProps.is() )
WriteOutline( xShapeProps );
pFS->endElementNS( mnXmlNamespace, XML_spPr );
// connector shape (cxnSp) cannot contain text (txBody) (according to schema)
if( nShapeNode != XML_cxnSp )
{
// write text
WriteTextBox( xShape, mnXmlNamespace );
}
pFS->endElementNS(mnXmlNamespace, nShapeNode);
return *this;
}
ShapeExport& ShapeExport::WriteLineShape( const Reference< XShape >& xShape )
{
bool bFlipH = false;
bool bFlipV = false;
SAL_INFO("oox.shape", "write line shape");
FSHelperPtr pFS = GetFS();
pFS->startElementNS(mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp));
tools::PolyPolygon aPolyPolygon = EscherPropertyContainer::GetPolyPolygon( xShape );
if( aPolyPolygon.Count() == 1 && aPolyPolygon[ 0 ].GetSize() == 2)
{
const tools::Polygon& rPoly = aPolyPolygon[ 0 ];
bFlipH = ( rPoly[ 0 ].X() > rPoly[ 1 ].X() );
bFlipV = ( rPoly[ 0 ].Y() > rPoly[ 1 ].Y() );
}
Reference<XPropertySet> const xShapeProps(xShape, UNO_QUERY);
// non visual shape properties
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
pFS->startElementNS(mnXmlNamespace, XML_nvSpPr);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
AddExtLst(pFS, xShapeProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
}
pFS->singleElementNS( mnXmlNamespace, XML_cNvSpPr );
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
WriteNonVisualProperties( xShape );
pFS->endElementNS( mnXmlNamespace, XML_nvSpPr );
}
// visual shape properties
pFS->startElementNS(mnXmlNamespace, XML_spPr);
WriteShapeTransformation( xShape, XML_a, bFlipH, bFlipV, true);
WritePresetShape( "line"_ostr );
if( xShapeProps.is() )
WriteOutline( xShapeProps );
pFS->endElementNS( mnXmlNamespace, XML_spPr );
//write style
pFS->startElementNS(mnXmlNamespace, XML_style);
WriteShapeStyle( xShapeProps );
pFS->endElementNS( mnXmlNamespace, XML_style );
// write text
WriteTextBox( xShape, mnXmlNamespace );
pFS->endElementNS( mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp) );
return *this;
}
ShapeExport& ShapeExport::WriteNonVisualDrawingProperties( const Reference< XShape >& xShape, const char* pName )
{
FSHelperPtr pFS = GetFS();
Reference<XPropertySet> const xShapeProps(xShape, UNO_QUERY);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, pName );
AddExtLst(pFS, xShapeProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
return *this;
}
ShapeExport& ShapeExport::WriteNonVisualProperties( const Reference< XShape >& )
{
// Override to generate //nvPr elements.
return *this;
}
ShapeExport& ShapeExport::WriteRectangleShape( const Reference< XShape >& xShape )
{
SAL_INFO("oox.shape", "write rectangle shape");
FSHelperPtr pFS = GetFS();
pFS->startElementNS(mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp));
sal_Int32 nRadius = 0;
Reference< XPropertySet > xShapeProps( xShape, UNO_QUERY );
if( xShapeProps.is() )
{
xShapeProps->getPropertyValue( u"CornerRadius"_ustr ) >>= nRadius;
}
if( nRadius )
{
nRadius = MapSize( awt::Size( nRadius, 0 ) ).Width;
}
//TODO: use nRadius value more precisely than just deciding whether to use
// "rect" or "roundRect" preset shape below
// non visual shape properties
if (GetDocumentType() == DOCUMENT_DOCX && !mbUserShapes)
pFS->singleElementNS(mnXmlNamespace, XML_cNvSpPr);
pFS->startElementNS(mnXmlNamespace, XML_nvSpPr);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
AddExtLst(pFS, xShapeProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
pFS->singleElementNS(mnXmlNamespace, XML_cNvSpPr);
WriteNonVisualProperties( xShape );
pFS->endElementNS( mnXmlNamespace, XML_nvSpPr );
// visual shape properties
pFS->startElementNS(mnXmlNamespace, XML_spPr);
WriteShapeTransformation( xShape, XML_a );
WritePresetShape( nRadius == 0 ? "rect" : "roundRect" );
Reference< XPropertySet > xProps( xShape, UNO_QUERY );
if( xProps.is() )
{
WriteFill( xProps );
WriteOutline( xProps );
}
pFS->endElementNS( mnXmlNamespace, XML_spPr );
// write text
WriteTextBox( xShape, mnXmlNamespace );
pFS->endElementNS( mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp) );
return *this;
}
typedef ShapeExport& (ShapeExport::*ShapeConverter)( const Reference< XShape >& );
typedef std::unordered_map< const char*, ShapeConverter, rtl::CStringHash, rtl::CStringEqual> NameToConvertMapType;
namespace
{
constexpr auto constMap = frozen::make_unordered_map<std::u16string_view, ShapeConverter>(
{
{ u"com.sun.star.drawing.CaptionShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.drawing.ClosedBezierShape", &ShapeExport::WriteClosedPolyPolygonShape },
{ u"com.sun.star.drawing.ConnectorShape", &ShapeExport::WriteConnectorShape },
{ u"com.sun.star.drawing.CustomShape", &ShapeExport::WriteCustomShape },
{ u"com.sun.star.drawing.EllipseShape", &ShapeExport::WriteEllipseShape },
{ u"com.sun.star.drawing.GraphicObjectShape", &ShapeExport::WriteGraphicObjectShape },
{ u"com.sun.star.drawing.LineShape", &ShapeExport::WriteLineShape },
{ u"com.sun.star.drawing.MediaShape", &ShapeExport::WriteGraphicObjectShape },
{ u"com.sun.star.drawing.OpenBezierShape", &ShapeExport::WriteOpenPolyPolygonShape },
{ u"com.sun.star.drawing.PolyPolygonShape", &ShapeExport::WriteClosedPolyPolygonShape },
{ u"com.sun.star.drawing.PolyLineShape", &ShapeExport::WriteOpenPolyPolygonShape },
{ u"com.sun.star.drawing.RectangleShape", &ShapeExport::WriteRectangleShape },
{ u"com.sun.star.drawing.OLE2Shape", &ShapeExport::WriteOLE2Shape },
{ u"com.sun.star.drawing.TableShape", &ShapeExport::WriteTableShape },
{ u"com.sun.star.drawing.TextShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.drawing.GroupShape", &ShapeExport::WriteGroupShape },
{ u"com.sun.star.presentation.GraphicObjectShape", &ShapeExport::WriteGraphicObjectShape },
{ u"com.sun.star.presentation.MediaShape", &ShapeExport::WriteGraphicObjectShape },
{ u"com.sun.star.presentation.ChartShape", &ShapeExport::WriteOLE2Shape },
{ u"com.sun.star.presentation.OLE2Shape", &ShapeExport::WriteOLE2Shape },
{ u"com.sun.star.presentation.TableShape", &ShapeExport::WriteTableShape },
{ u"com.sun.star.presentation.TextShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.presentation.DateTimeShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.presentation.FooterShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.presentation.HeaderShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.presentation.NotesShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.presentation.OutlinerShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.presentation.SlideNumberShape", &ShapeExport::WriteTextShape },
{ u"com.sun.star.presentation.TitleTextShape", &ShapeExport::WriteTextShape },
});
} // end anonymous namespace
ShapeExport& ShapeExport::WriteShape( const Reference< XShape >& xShape )
{
if (!xShape)
throw lang::IllegalArgumentException();
OUString sShapeType = xShape->getShapeType();
SAL_INFO("oox.shape", "write shape: " << sShapeType);
auto aConverterIterator = constMap.find(sShapeType);
if (aConverterIterator == constMap.end())
{
SAL_INFO("oox.shape", "unknown shape");
return WriteUnknownShape( xShape );
}
if (GetDocumentType() == DOCUMENT_PPTX)
{
Reference< XPropertySet > xShapeProperties(xShape, UNO_QUERY);
if (xShapeProperties && xShapeProperties->getPropertySetInfo()
&& xShapeProperties->getPropertySetInfo()->hasPropertyByName(u"IsPresentationObject"_ustr)
&& xShapeProperties->getPropertyValue(u"IsPresentationObject"_ustr).hasValue())
mbPlaceholder = xShapeProperties->getPropertyValue(u"IsPresentationObject"_ustr).get<bool>();
}
(this->*(aConverterIterator->second))(xShape);
return *this;
}
static bool lcl_isTextBox(const Reference<XInterface>& xIface)
{
uno::Reference<beans::XPropertySet> xPropertySet(xIface, uno::UNO_QUERY);
if (!xPropertySet.is())
return false;
uno::Reference<beans::XPropertySetInfo> xPropertySetInfo = xPropertySet->getPropertySetInfo();
if (!xPropertySetInfo->hasPropertyByName(u"TextBox"_ustr))
return false;
css::uno::Any aTextBox(xPropertySet->getPropertyValue(u"TextBox"_ustr));
if (!aTextBox.hasValue())
return false;
return aTextBox.get<bool>();
}
ShapeExport& ShapeExport::WriteTextBox( const Reference< XInterface >& xIface, sal_Int32 nXmlNamespace, bool bWritePropertiesAsLstStyles )
{
// In case this shape has an associated textbox, then export that, and we're done.
if (GetDocumentType() == DOCUMENT_DOCX && !mbUserShapes && GetTextExport())
{
if (lcl_isTextBox(xIface))
{
GetTextExport()->WriteTextBox(uno::Reference<drawing::XShape>(xIface, uno::UNO_QUERY_THROW));
WriteText( xIface, /*bBodyPr=*/true, /*bText=*/false, /*nXmlNamespace=*/nXmlNamespace );
return *this;
}
}
Reference< XText > xXText( xIface, UNO_QUERY );
if( (NonEmptyText( xIface ) || GetDocumentType() == DOCUMENT_PPTX)
&& xXText.is() )
{
FSHelperPtr pFS = GetFS();
pFS->startElementNS(nXmlNamespace,
(GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_txBody : XML_txbx));
WriteText(xIface, /*bBodyPr=*/(GetDocumentType() != DOCUMENT_DOCX || mbUserShapes), /*bText=*/true,
/*nXmlNamespace=*/0, /*bWritePropertiesAsLstStyles=*/bWritePropertiesAsLstStyles);
pFS->endElementNS( nXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_txBody : XML_txbx) );
if (GetDocumentType() == DOCUMENT_DOCX && !mbUserShapes)
WriteText( xIface, /*bBodyPr=*/true, /*bText=*/false, /*nXmlNamespace=*/nXmlNamespace );
}
else if (GetDocumentType() == DOCUMENT_DOCX && !mbUserShapes)
mpFS->singleElementNS(nXmlNamespace, XML_bodyPr);
return *this;
}
void ShapeExport::WriteTable( const Reference< XShape >& rXShape )
{
Reference< XTable > xTable;
Reference< XPropertySet > xPropSet( rXShape, UNO_QUERY );
mpFS->startElementNS(XML_a, XML_graphic);
mpFS->startElementNS(XML_a, XML_graphicData,
XML_uri, "http://schemas.openxmlformats.org/drawingml/2006/table");
if ( xPropSet.is() && ( xPropSet->getPropertyValue( u"Model"_ustr ) >>= xTable ) )
{
mpFS->startElementNS(XML_a, XML_tbl);
mpFS->startElementNS(XML_a, XML_tblPr);
WriteShapeEffects(xPropSet);
mpFS->endElementNS(XML_a, XML_tblPr);
Reference< container::XIndexAccess > xColumns( xTable->getColumns(), UNO_QUERY_THROW );
Reference< container::XIndexAccess > xRows( xTable->getRows(), UNO_QUERY_THROW );
sal_uInt16 nRowCount = static_cast< sal_uInt16 >( xRows->getCount() );
sal_uInt16 nColumnCount = static_cast< sal_uInt16 >( xColumns->getCount() );
mpFS->startElementNS(XML_a, XML_tblGrid);
for ( sal_Int32 x = 0; x < nColumnCount; x++ )
{
Reference< XPropertySet > xColPropSet( xColumns->getByIndex( x ), UNO_QUERY_THROW );
sal_Int32 nWidth(0);
xColPropSet->getPropertyValue( u"Width"_ustr ) >>= nWidth;
mpFS->singleElementNS(XML_a, XML_gridCol,
XML_w, OString::number(oox::drawingml::convertHmmToEmu(nWidth)));
}
mpFS->endElementNS( XML_a, XML_tblGrid );
// map for holding the transpose index of the merged cells and pair<parentTransposeIndex, parentCell>
typedef std::unordered_map<sal_Int32, std::pair<sal_Int32, Reference< XMergeableCell> > > transposeTableMap;
transposeTableMap mergedCellMap;
for( sal_Int32 nRow = 0; nRow < nRowCount; nRow++ )
{
Reference< XPropertySet > xRowPropSet( xRows->getByIndex( nRow ), UNO_QUERY_THROW );
sal_Int32 nRowHeight(0);
xRowPropSet->getPropertyValue( u"Height"_ustr ) >>= nRowHeight;
mpFS->startElementNS(XML_a, XML_tr,
XML_h, OString::number(oox::drawingml::convertHmmToEmu(nRowHeight)));
for( sal_Int32 nColumn = 0; nColumn < nColumnCount; nColumn++ )
{
Reference< XMergeableCell > xCell( xTable->getCellByPosition( nColumn, nRow ),
UNO_QUERY_THROW );
sal_Int32 transposedIndexofCell = (nRow * nColumnCount) + nColumn;
//assume we will open a cell, set to false below if we won't
bool bCellOpened = true;
if(xCell->getColumnSpan() > 1 && xCell->getRowSpan() > 1)
{
// having both : horizontal and vertical merge
mpFS->startElementNS(XML_a, XML_tc,
XML_gridSpan, OString::number(xCell->getColumnSpan()),
XML_rowSpan, OString::number(xCell->getRowSpan()));
// since, XMergeableCell doesn't have the information about
// cell having hMerge or vMerge.
// So, Populating the merged cell map in-order to use it to
// decide the attribute for the individual cell.
for(sal_Int32 columnIndex = nColumn; columnIndex < nColumn+xCell->getColumnSpan(); ++columnIndex)
{
for(sal_Int32 rowIndex = nRow; rowIndex < nRow+xCell->getRowSpan(); ++rowIndex)
{
sal_Int32 transposeIndexForMergeCell =
(rowIndex * nColumnCount) + columnIndex;
mergedCellMap[transposeIndexForMergeCell] =
std::make_pair(transposedIndexofCell, xCell);
}
}
}
else if(xCell->getColumnSpan() > 1)
{
// having : horizontal merge
mpFS->startElementNS(XML_a, XML_tc,
XML_gridSpan, OString::number(xCell->getColumnSpan()));
for(sal_Int32 columnIndex = nColumn; columnIndex < nColumn + xCell->getColumnSpan(); ++columnIndex) {
sal_Int32 transposeIndexForMergeCell = (nRow*nColumnCount) + columnIndex;
mergedCellMap[transposeIndexForMergeCell] =
std::make_pair(transposedIndexofCell, xCell);
}
}
else if(xCell->getRowSpan() > 1)
{
// having : vertical merge
mpFS->startElementNS(XML_a, XML_tc,
XML_rowSpan, OString::number(xCell->getRowSpan()));
for(sal_Int32 rowIndex = nRow; rowIndex < nRow + xCell->getRowSpan(); ++rowIndex) {
sal_Int32 transposeIndexForMergeCell = (rowIndex*nColumnCount) + nColumn;
mergedCellMap[transposeIndexForMergeCell] =
std::make_pair(transposedIndexofCell, xCell);
}
}
else
{
// now, the cell can be an independent cell or
// it can be a cell which is been merged to some parent cell
if(!xCell->isMerged())
{
// independent cell
mpFS->startElementNS(XML_a, XML_tc);
}
else
{
// it a merged cell to some parent cell
// find the parent cell for the current cell at hand
transposeTableMap::iterator it = mergedCellMap.find(transposedIndexofCell);
if(it != mergedCellMap.end())
{
sal_Int32 transposeIndexOfParent = it->second.first;
Reference< XMergeableCell > parentCell = it->second.second;
// finding the row and column index for the parent cell from transposed index
sal_Int32 parentColumnIndex = transposeIndexOfParent % nColumnCount;
sal_Int32 parentRowIndex = transposeIndexOfParent / nColumnCount;
if(nColumn == parentColumnIndex)
{
// the cell is vertical merge and it might have gridspan
if(parentCell->getColumnSpan() > 1)
{
// vMerge and has gridSpan
mpFS->startElementNS(XML_a, XML_tc,
XML_vMerge, OString::number(1),
XML_gridSpan, OString::number(xCell->getColumnSpan()));
}
else
{
// only vMerge
mpFS->startElementNS(XML_a, XML_tc,
XML_vMerge, OString::number(1));
}
}
else if(nRow == parentRowIndex)
{
// the cell is horizontal merge and it might have rowspan
if(parentCell->getRowSpan() > 1)
{
// hMerge and has rowspan
mpFS->startElementNS(XML_a, XML_tc,
XML_hMerge, OString::number(1),
XML_rowSpan, OString::number(xCell->getRowSpan()));
}
else
{
// only hMerge
mpFS->startElementNS(XML_a, XML_tc,
XML_hMerge, OString::number(1));
}
}
else
{
// has hMerge and vMerge
mpFS->startElementNS(XML_a, XML_tc,
XML_vMerge, OString::number(1),
XML_hMerge, OString::number(1));
}
}
else
bCellOpened = false;
}
}
if (bCellOpened)
{
WriteTextBox( xCell, XML_a );
Reference< XPropertySet > xCellPropSet(xCell, UNO_QUERY_THROW);
WriteTableCellProperties(xCellPropSet);
mpFS->endElementNS( XML_a, XML_tc );
}
}
mpFS->endElementNS( XML_a, XML_tr );
}
mpFS->endElementNS( XML_a, XML_tbl );
}
mpFS->endElementNS( XML_a, XML_graphicData );
mpFS->endElementNS( XML_a, XML_graphic );
}
void ShapeExport::WriteTableCellProperties(const Reference< XPropertySet>& xCellPropSet)
{
sal_Int32 nLeftMargin(0), nRightMargin(0);
TextVerticalAdjust eVerticalAlignment;
const char* sVerticalAlignment;
Any aLeftMargin = xCellPropSet->getPropertyValue(u"TextLeftDistance"_ustr);
aLeftMargin >>= nLeftMargin;
Any aRightMargin = xCellPropSet->getPropertyValue(u"TextRightDistance"_ustr);
aRightMargin >>= nRightMargin;
Any aVerticalAlignment = xCellPropSet->getPropertyValue(u"TextVerticalAdjust"_ustr);
aVerticalAlignment >>= eVerticalAlignment;
sVerticalAlignment = GetTextVerticalAdjust(eVerticalAlignment);
sal_Int32 nRotateAngle = 0;
Any aRotateAngle = xCellPropSet->getPropertyValue(u"RotateAngle"_ustr);
aRotateAngle >>= nRotateAngle;
std::optional<OString> aTextVerticalValue = GetTextVerticalType(nRotateAngle);
Sequence<PropertyValue> aGrabBag;
if( !aTextVerticalValue &&
(xCellPropSet->getPropertyValue(u"CellInteropGrabBag"_ustr) >>= aGrabBag) )
{
for (auto const& rIt : aGrabBag)
{
if (rIt.Name == "mso-tcPr-vert-value")
{
aTextVerticalValue = rIt.Value.get<OUString>().toUtf8();
break;
}
}
}
mpFS->startElementNS(XML_a, XML_tcPr, XML_anchor, sVerticalAlignment,
XML_vert, aTextVerticalValue,
XML_marL, sax_fastparser::UseIf(OString::number(oox::drawingml::convertHmmToEmu(nLeftMargin)), nLeftMargin > 0),
XML_marR, sax_fastparser::UseIf(OString::number(oox::drawingml::convertHmmToEmu(nRightMargin)), nRightMargin > 0));
// Write background fill for table cell.
// TODO
// tcW : Table cell width
WriteTableCellBorders(xCellPropSet);
DrawingML::WriteFill(xCellPropSet);
mpFS->endElementNS( XML_a, XML_tcPr );
}
void ShapeExport::WriteBorderLine(const sal_Int32 xml_line_element, const BorderLine2& rBorderLine)
{
// While importing the table cell border line width, it converts EMU->Hmm then divided result by 2.
// To get original value of LineWidth need to multiple by 2.
sal_Int32 nBorderWidth = rBorderLine.LineWidth;
nBorderWidth *= 2;
nBorderWidth = oox::drawingml::convertHmmToEmu( nBorderWidth );
if ( nBorderWidth > 0 )
{
mpFS->startElementNS(XML_a, xml_line_element, XML_w, OString::number(nBorderWidth));
if ( rBorderLine.Color == sal_Int32( COL_AUTO ) )
mpFS->singleElementNS(XML_a, XML_noFill);
else
DrawingML::WriteSolidFill( ::Color(ColorTransparency, rBorderLine.Color) );
OUString sBorderStyle;
sal_Int16 nStyle = rBorderLine.LineStyle;
mAny.setValue(&nStyle, cppu::UnoType<sal_Int16>::get());
switch (*o3tl::doAccess<sal_Int16>(mAny))
{
case ::table::BorderLineStyle::SOLID:
sBorderStyle = "solid";
break;
case ::table::BorderLineStyle::DOTTED:
sBorderStyle = "dot";
break;
case ::table::BorderLineStyle::DASHED:
sBorderStyle = "dash";
break;
case ::table::BorderLineStyle::DASH_DOT:
sBorderStyle = "dashDot";
break;
case ::table::BorderLineStyle::DASH_DOT_DOT:
sBorderStyle = "sysDashDotDot";
break;
}
mpFS->singleElementNS(XML_a, XML_prstDash, XML_val, sBorderStyle);
mpFS->endElementNS(XML_a, xml_line_element);
}
else if( nBorderWidth == 0)
{
mpFS->startElementNS(XML_a, xml_line_element);
mpFS->singleElementNS(XML_a, XML_noFill);
mpFS->endElementNS(XML_a, xml_line_element);
}
}
void ShapeExport::WriteTableCellBorders(const Reference< XPropertySet>& xCellPropSet)
{
BorderLine2 aBorderLine;
// lnL - Left Border Line Properties of table cell
xCellPropSet->getPropertyValue(u"LeftBorder"_ustr) >>= aBorderLine;
WriteBorderLine( XML_lnL, aBorderLine );
// lnR - Right Border Line Properties of table cell
xCellPropSet->getPropertyValue(u"RightBorder"_ustr) >>= aBorderLine;
WriteBorderLine( XML_lnR, aBorderLine );
// lnT - Top Border Line Properties of table cell
xCellPropSet->getPropertyValue(u"TopBorder"_ustr) >>= aBorderLine;
WriteBorderLine( XML_lnT, aBorderLine );
// lnB - Bottom Border Line Properties of table cell
xCellPropSet->getPropertyValue(u"BottomBorder"_ustr) >>= aBorderLine;
WriteBorderLine( XML_lnB, aBorderLine );
}
ShapeExport& ShapeExport::WriteTableShape( const Reference< XShape >& xShape )
{
FSHelperPtr pFS = GetFS();
pFS->startElementNS(mnXmlNamespace, XML_graphicFrame);
pFS->startElementNS(mnXmlNamespace, XML_nvGraphicFramePr);
Reference<XPropertySet> const xShapeProps(xShape, UNO_QUERY);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
AddExtLst(pFS, xShapeProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
pFS->singleElementNS(mnXmlNamespace, XML_cNvGraphicFramePr);
if( GetDocumentType() == DOCUMENT_PPTX )
pFS->singleElementNS(mnXmlNamespace, XML_nvPr);
pFS->endElementNS( mnXmlNamespace, XML_nvGraphicFramePr );
WriteShapeTransformation( xShape, mnXmlNamespace );
WriteTable( xShape );
pFS->endElementNS( mnXmlNamespace, XML_graphicFrame );
return *this;
}
ShapeExport& ShapeExport::WriteTextShape( const Reference< XShape >& xShape )
{
FSHelperPtr pFS = GetFS();
Reference<XPropertySet> xShapeProps(xShape, UNO_QUERY);
pFS->startElementNS(mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp));
// non visual shape properties
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
pFS->startElementNS(mnXmlNamespace, XML_nvSpPr);
pFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
OUString sURL;
if (GetProperty(xShapeProps, u"URL"_ustr))
mAny >>= sURL;
if (!sURL.isEmpty())
{
OUString sRelId = mpFB->addRelation(mpFS->getOutputStream(),
oox::getRelationship(Relationship::HYPERLINK),
mpURLTransformer->getTransformedString(sURL),
mpURLTransformer->isExternalURL(sURL));
mpFS->singleElementNS(XML_a, XML_hlinkClick, FSNS(XML_r, XML_id), sRelId);
}
AddExtLst(pFS, xShapeProps);
pFS->endElementNS(mnXmlNamespace, XML_cNvPr);
}
pFS->singleElementNS(mnXmlNamespace, XML_cNvSpPr, XML_txBox, "1");
if (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes)
{
WriteNonVisualProperties( xShape );
pFS->endElementNS( mnXmlNamespace, XML_nvSpPr );
}
// visual shape properties
pFS->startElementNS(mnXmlNamespace, XML_spPr);
WriteShapeTransformation( xShape, XML_a );
WritePresetShape( "rect"_ostr );
uno::Reference<beans::XPropertySet> xPropertySet(xShape, UNO_QUERY);
if (!IsFontworkShape(xShapeProps)) // Fontwork needs fill and outline in run properties instead.
{
WriteBlipOrNormalFill(xPropertySet, u"Graphic"_ustr, xShape->getSize());
WriteOutline(xPropertySet);
WriteShapeEffects(xPropertySet);
}
pFS->endElementNS( mnXmlNamespace, XML_spPr );
WriteTextBox( xShape, mnXmlNamespace );
pFS->endElementNS( mnXmlNamespace, (GetDocumentType() != DOCUMENT_DOCX || mbUserShapes ? XML_sp : XML_wsp) );
return *this;
}
void ShapeExport::WriteMathShape(Reference<XShape> const& xShape)
{
Reference<XPropertySet> const xPropSet(xShape, UNO_QUERY);
assert(xPropSet.is());
Reference<XModel> xMathModel;
xPropSet->getPropertyValue(u"Model"_ustr) >>= xMathModel;
assert(xMathModel.is());
assert(GetDocumentType() != DOCUMENT_DOCX); // should be written in DocxAttributeOutput
SAL_WARN_IF(GetDocumentType() == DOCUMENT_XLSX, "oox.shape", "Math export to XLSX isn't tested, should it happen here?");
// ECMA standard does not actually allow oMath outside of
// WordProcessingML so write a MCE like PPT 2010 does
mpFS->startElementNS(XML_mc, XML_AlternateContent);
mpFS->startElementNS(XML_mc, XML_Choice,
FSNS(XML_xmlns, XML_a14), mpFB->getNamespaceURL(OOX_NS(a14)),
XML_Requires, "a14");
mpFS->startElementNS(mnXmlNamespace, XML_sp);
mpFS->startElementNS(mnXmlNamespace, XML_nvSpPr);
mpFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
AddExtLst(mpFS, xPropSet);
mpFS->endElementNS(mnXmlNamespace, XML_cNvPr);
mpFS->singleElementNS(mnXmlNamespace, XML_cNvSpPr, XML_txBox, "1");
mpFS->singleElementNS(mnXmlNamespace, XML_nvPr);
mpFS->endElementNS(mnXmlNamespace, XML_nvSpPr);
mpFS->startElementNS(mnXmlNamespace, XML_spPr);
WriteShapeTransformation(xShape, XML_a);
WritePresetShape("rect"_ostr);
mpFS->endElementNS(mnXmlNamespace, XML_spPr);
mpFS->startElementNS(mnXmlNamespace, XML_txBody);
mpFS->startElementNS(XML_a, XML_bodyPr);
mpFS->endElementNS(XML_a, XML_bodyPr);
mpFS->startElementNS(XML_a, XML_p);
mpFS->startElementNS(XML_a14, XML_m);
oox::FormulaImExportBase *const pMagic(
dynamic_cast<oox::FormulaImExportBase*>(xMathModel.get()));
assert(pMagic);
pMagic->writeFormulaOoxml(GetFS(), GetFB()->getVersion(), GetDocumentType(),
FormulaImExportBase::eFormulaAlign::INLINE);
mpFS->endElementNS(XML_a14, XML_m);
mpFS->endElementNS(XML_a, XML_p);
mpFS->endElementNS(mnXmlNamespace, XML_txBody);
mpFS->endElementNS(mnXmlNamespace, XML_sp);
mpFS->endElementNS(XML_mc, XML_Choice);
mpFS->startElementNS(XML_mc, XML_Fallback);
// TODO: export bitmap shape as fallback
mpFS->endElementNS(XML_mc, XML_Fallback);
mpFS->endElementNS(XML_mc, XML_AlternateContent);
}
ShapeExport& ShapeExport::WriteOLE2Shape( const Reference< XShape >& xShape )
{
Reference< XPropertySet > xPropSet( xShape, UNO_QUERY );
if (!xPropSet.is())
return *this;
enum { CHART, MATH, OTHER } eType(OTHER);
OUString clsid;
xPropSet->getPropertyValue(u"CLSID"_ustr) >>= clsid;
if (!clsid.isEmpty())
{
SvGlobalName aClassID;
bool const isValid = aClassID.MakeId(clsid);
assert(isValid); (void)isValid;
if (SotExchange::IsChart(aClassID))
eType = CHART;
else if (SotExchange::IsMath(aClassID))
eType = MATH;
}
if (CHART == eType)
{
Reference< XChartDocument > xChartDoc;
xPropSet->getPropertyValue(u"Model"_ustr) >>= xChartDoc;
assert(xChartDoc.is());
//export the chart
#if !ENABLE_WASM_STRIP_CHART
// WASM_CHART change
// TODO: With Chart extracted this cannot really happen since
// no Chart could've been added at all
ChartExport aChartExport( mnXmlNamespace, GetFS(), xChartDoc, GetFB(), GetDocumentType() );
aChartExport.WriteChartObj( xShape, GetNewShapeID( xShape ), ++mnChartCount );
#endif
return *this;
}
if (MATH == eType)
{
WriteMathShape(xShape);
return *this;
}
uno::Reference<embed::XEmbeddedObject> const xObj(
xPropSet->getPropertyValue(u"EmbeddedObject"_ustr), uno::UNO_QUERY);
if (!xObj.is())
{
SAL_WARN("oox.shape", "ShapeExport::WriteOLE2Shape: no object");
// tdf#152436 Export the preview graphic of the object if the object is missing.
SdrObject* pSdrOLE2(SdrObject::getSdrObjectFromXShape(xShape));
if (auto pOle2Obj = dynamic_cast<SdrOle2Obj*>(pSdrOLE2))
{
const Graphic* pGraphic = pOle2Obj->GetGraphic();
if (pGraphic)
WriteGraphicObjectShapePart(xShape, pGraphic);
}
return *this;
}
uno::Sequence<beans::PropertyValue> grabBag;
OUString entryName;
try
{
uno::Reference<beans::XPropertySet> const xParent(
uno::Reference<container::XChild>(xObj, uno::UNO_QUERY_THROW)->getParent(),
uno::UNO_QUERY_THROW);
xParent->getPropertyValue(u"InteropGrabBag"_ustr) >>= grabBag;
entryName = uno::Reference<embed::XEmbedPersist>(xObj, uno::UNO_QUERY_THROW)->getEntryName();
}
catch (uno::Exception const&)
{
TOOLS_WARN_EXCEPTION("oox.shape", "ShapeExport::WriteOLE2Shape");
return *this;
}
OUString progID;
for (auto const& it : grabBag)
{
if (it.Name == "EmbeddedObjects")
{
uno::Sequence<beans::PropertyValue> objects;
it.Value >>= objects;
for (auto const& object : objects)
{
if (object.Name == entryName)
{
uno::Sequence<beans::PropertyValue> props;
object.Value >>= props;
for (auto const& prop : props)
{
if (prop.Name == "ProgID")
{
prop.Value >>= progID;
break;
}
}
break;
}
}
break;
}
}
OUString sMediaType;
OUString sRelationType;
OUString sSuffix;
const char * pProgID(nullptr);
OString anotherProgID;
uno::Reference<io::XInputStream> const xInStream =
oox::GetOLEObjectStream(
mpFB->getComponentContext(), xObj, progID,
sMediaType, sRelationType, sSuffix, pProgID);
OUString sURL;
OUString sRelId;
if (!xInStream.is())
{
xPropSet->getPropertyValue(u"LinkURL"_ustr) >>= sURL;
if (sURL.isEmpty())
return *this;
sRelId = mpFB->addRelation(mpFS->getOutputStream(),
oox::getRelationship(Relationship::OLEOBJECT), sURL, true);
}
else
{
if (!pProgID && !progID.isEmpty())
{
anotherProgID = OUStringToOString(progID, RTL_TEXTENCODING_UTF8);
pProgID = anotherProgID.getStr();
}
assert(!sMediaType.isEmpty());
assert(!sRelationType.isEmpty());
assert(!sSuffix.isEmpty());
OUString sNumber = OUString::number(++m_nEmbeddedObjects);
OUString sFileName = u"embeddings/oleObject"_ustr + sNumber + u"."_ustr + sSuffix;
OUString sFilePath = GetComponentDir() + u"/"_ustr + sFileName;
uno::Reference<io::XOutputStream> const xOutStream(mpFB->openFragmentStream(sFilePath, sMediaType));
assert(xOutStream.is()); // no reason why that could fail
try
{
::comphelper::OStorageHelper::CopyInputToOutput(xInStream, xOutStream);
}
catch (uno::Exception const&)
{
TOOLS_WARN_EXCEPTION("oox.shape", "ShapeExport::WriteOLEObject");
}
sRelId = mpFB->addRelation(
mpFS->getOutputStream(), sRelationType,
Concat2View(GetRelationCompPrefix() + sFileName));
}
sal_Int64 nAspect;
bool bShowAsIcon = (xPropSet->getPropertyValue(u"Aspect"_ustr) >>= nAspect)
&& nAspect == embed::Aspects::MSOLE_ICON;
mpFS->startElementNS(mnXmlNamespace, XML_graphicFrame);
mpFS->startElementNS(mnXmlNamespace, XML_nvGraphicFramePr);
mpFS->startElementNS(mnXmlNamespace, XML_cNvPr,
XML_id, OString::number(GetNewShapeID(xShape)),
XML_name, GetShapeName(xShape));
AddExtLst(mpFS, xPropSet);
mpFS->endElementNS(mnXmlNamespace, XML_cNvPr);
mpFS->singleElementNS(mnXmlNamespace, XML_cNvGraphicFramePr);
if (GetDocumentType() == DOCUMENT_PPTX)
mpFS->singleElementNS(mnXmlNamespace, XML_nvPr);
mpFS->endElementNS( mnXmlNamespace, XML_nvGraphicFramePr );
WriteShapeTransformation( xShape, mnXmlNamespace );
mpFS->startElementNS(XML_a, XML_graphic);
mpFS->startElementNS(XML_a, XML_graphicData,
XML_uri, "http://schemas.openxmlformats.org/presentationml/2006/ole");
if (pProgID)
{
mpFS->startElementNS( mnXmlNamespace, XML_oleObj,
XML_showAsIcon, sax_fastparser::UseIf("1", bShowAsIcon),
XML_progId, pProgID,
FSNS(XML_r, XML_id), sRelId,
XML_spid, "" );
}
else
{
mpFS->startElementNS( mnXmlNamespace, XML_oleObj,
//? XML_name, "Document",
XML_showAsIcon, sax_fastparser::UseIf("1", bShowAsIcon),
FSNS(XML_r, XML_id), sRelId,
// The spec says that this is a required attribute, but PowerPoint can only handle an empty value.
XML_spid, "" );
}
if (sURL.isEmpty())
mpFS->singleElementNS(mnXmlNamespace, XML_embed);
else
mpFS->singleElementNS(mnXmlNamespace, XML_link, XML_updateAutomatic, "1");
// pic element
SdrObject* pSdrOLE2(SdrObject::getSdrObjectFromXShape(xShape));
if (auto pOle2Obj = dynamic_cast<SdrOle2Obj*>(pSdrOLE2))
{
const Graphic* pGraphic = pOle2Obj->GetGraphic();
if (pGraphic)
WriteGraphicObjectShapePart(xShape, pGraphic);
}
mpFS->endElementNS( mnXmlNamespace, XML_oleObj );
mpFS->endElementNS( XML_a, XML_graphicData );
mpFS->endElementNS( XML_a, XML_graphic );
mpFS->endElementNS( mnXmlNamespace, XML_graphicFrame );
return *this;
}
ShapeExport& ShapeExport::WriteUnknownShape( const Reference< XShape >& )
{
// Override this method to do something useful.
return *this;
}
sal_Int32 ShapeExport::GetNewShapeID( const Reference< XShape >& rXShape )
{
return GetNewShapeID( rXShape, GetFB() );
}
sal_Int32 ShapeExport::GetNewShapeID( const Reference< XShape >& rXShape, XmlFilterBase* pFB )
{
if( !rXShape.is() )
return -1;
sal_Int32 nID = pFB->GetUniqueId();
(*mpShapeMap)[ rXShape ] = nID;
return nID;
}
sal_Int32 ShapeExport::GetShapeID( const Reference< XShape >& rXShape )
{
return GetShapeID( rXShape, mpShapeMap );
}
sal_Int32 ShapeExport::GetShapeID( const Reference< XShape >& rXShape, ShapeHashMap* pShapeMap )
{
if( !rXShape.is() )
return -1;
ShapeHashMap::const_iterator aIter = pShapeMap->find( rXShape );
if( aIter == pShapeMap->end() )
return -1;
return aIter->second;
}
OUString ShapeExport::GetShapeName(const Reference<XShape>& xShape)
{
Reference<XPropertySet> rXPropSet(xShape, UNO_QUERY);
// Empty name keeps the object unnamed.
OUString sName;
if (GetProperty(rXPropSet, u"Name"_ustr))
mAny >>= sName;
return sName;
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V516 Consider inspecting an odd expression. Non-null function pointer is compared to null: 'aSize.Height != 0'.
↑ V516 Consider inspecting an odd expression. Non-null function pointer is compared to null: 'aSize.Width != 0'.
↑ V547 Expression 'nStartGlueId != - 1' is always true.
↑ V547 Expression 'nEndGlueId != - 1' is always true.
↑ V547 Expression 'nRadius == 0' is always true.
↑ V547 Expression 'nLeftMargin > 0' is always false.
↑ V547 Expression 'nRightMargin > 0' is always false.
↑ V547 Expression 'bUseBackground' is always false.
↑ V547 Expression '!isVisible' is always false.
↑ V547 Expression 'bIsOOXMLCurve' is always false.
↑ V547 Expression 'bIsOOXMLCurve' is always false.
↑ V547 Expression 'nRadius' is always false.
↑ V560 A part of conditional expression is always true: !bFlipH.
↑ V560 A part of conditional expression is always true: !bFlipV.
↑ V728 An excessive check can be simplified. The '(A && B) || (!A && !B)' expression is equivalent to the 'bool(A) == bool(B)' expression.
↑ V1019 Compound assignment expression is used inside condition.
↑ V1019 Compound assignment expression is used inside condition.
↑ V1019 Compound assignment expression is used inside condition.
↑ V1048 The 'bCustGeom' variable was assigned the same value.
↑ V1048 The 'bCustGeom' variable was assigned the same value.