/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <vcl/commandevent.hxx>
#include <vcl/event.hxx>
#include <vcl/decoview.hxx>
#include <vcl/toolkit/spinfld.hxx>
#include <vcl/settings.hxx>
#include <vcl/uitest/uiobject.hxx>
#include <sal/log.hxx>
#include <spin.hxx>
#include <svdata.hxx>
namespace {
void ImplGetSpinbuttonValue(vcl::Window* pWin,
const tools::Rectangle& rUpperRect, const tools::Rectangle& rLowerRect,
bool bUpperIn, bool bLowerIn, bool bUpperEnabled, bool bLowerEnabled,
bool bHorz, SpinbuttonValue& rValue )
{
// convert spinbutton data to a SpinbuttonValue structure for native painting
rValue.maUpperRect = rUpperRect;
rValue.maLowerRect = rLowerRect;
Point aPointerPos = pWin->GetPointerPosPixel();
ControlState nState = ControlState::ENABLED;
if (bUpperIn)
nState |= ControlState::PRESSED;
if (!pWin->IsEnabled() || !bUpperEnabled)
nState &= ~ControlState::ENABLED;
if (pWin->HasFocus())
nState |= ControlState::FOCUSED;
if (pWin->IsMouseOver() && rUpperRect.Contains(aPointerPos))
nState |= ControlState::ROLLOVER;
rValue.mnUpperState = nState;
nState = ControlState::ENABLED;
if (bLowerIn)
nState |= ControlState::PRESSED;
if (!pWin->IsEnabled() || !bLowerEnabled)
nState &= ~ControlState::ENABLED;
if (pWin->HasFocus())
nState |= ControlState::FOCUSED;
// for overlapping spins: highlight only one
if (pWin->IsMouseOver() && rLowerRect.Contains(aPointerPos) && !rUpperRect.Contains(aPointerPos))
nState |= ControlState::ROLLOVER;
rValue.mnLowerState = nState;
rValue.mnUpperPart = bHorz ? ControlPart::ButtonLeft : ControlPart::ButtonUp;
rValue.mnLowerPart = bHorz ? ControlPart::ButtonRight : ControlPart::ButtonDown;
}
bool ImplDrawNativeSpinfield(vcl::RenderContext& rRenderContext, vcl::Window const * pWin, const SpinbuttonValue& rSpinbuttonValue)
{
bool bNativeOK = false;
if (rRenderContext.IsNativeControlSupported(ControlType::Spinbox, ControlPart::Entire) &&
// there is just no useful native support for spinfields with dropdown
!(pWin->GetStyle() & WB_DROPDOWN))
{
if (rRenderContext.IsNativeControlSupported(ControlType::Spinbox, rSpinbuttonValue.mnUpperPart) &&
rRenderContext.IsNativeControlSupported(ControlType::Spinbox, rSpinbuttonValue.mnLowerPart))
{
// only paint the embedded spin buttons, all buttons are painted at once
tools::Rectangle aUpperAndLowerButtons( rSpinbuttonValue.maUpperRect.GetUnion( rSpinbuttonValue.maLowerRect ) );
bNativeOK = rRenderContext.DrawNativeControl(ControlType::Spinbox, ControlPart::AllButtons, aUpperAndLowerButtons,
ControlState::ENABLED, rSpinbuttonValue, OUString());
}
else
{
// paint the spinbox as a whole, use borderwindow to have proper clipping
vcl::Window* pBorder = pWin->GetWindow(GetWindowType::Border);
// to not overwrite everything, set the button region as clipregion to the border window
tools::Rectangle aClipRect(rSpinbuttonValue.maLowerRect);
aClipRect.Union(rSpinbuttonValue.maUpperRect);
vcl::RenderContext* pContext = &rRenderContext;
vcl::Region oldRgn;
Point aPt;
Size aSize(pBorder->GetOutputSizePixel()); // the size of the border window, i.e., the whole control
tools::Rectangle aNatRgn(aPt, aSize);
if (!pWin->SupportsDoubleBuffering())
{
// convert from screen space to borderwin space
aClipRect.SetPos(pBorder->ScreenToOutputPixel(pWin->OutputToScreenPixel(aClipRect.TopLeft())));
oldRgn = pBorder->GetOutDev()->GetClipRegion();
pBorder->GetOutDev()->SetClipRegion(vcl::Region(aClipRect));
pContext = pBorder->GetOutDev();
}
tools::Rectangle aBound, aContent;
if (!ImplGetSVData()->maNWFData.mbCanDrawWidgetAnySize &&
pContext->GetNativeControlRegion(ControlType::Spinbox, ControlPart::Entire,
aNatRgn, ControlState::NONE, rSpinbuttonValue,
aBound, aContent))
{
aSize = aContent.GetSize();
}
tools::Rectangle aRgn(aPt, aSize);
if (pWin->SupportsDoubleBuffering())
{
// convert from borderwin space, to the pWin's space
aRgn.SetPos(pWin->ScreenToOutputPixel(pBorder->OutputToScreenPixel(aRgn.TopLeft())));
}
bNativeOK = pContext->DrawNativeControl(ControlType::Spinbox, ControlPart::Entire, aRgn,
ControlState::ENABLED, rSpinbuttonValue, OUString());
if (!pWin->SupportsDoubleBuffering())
pBorder->GetOutDev()->SetClipRegion(oldRgn);
}
}
return bNativeOK;
}
bool ImplDrawNativeSpinbuttons(vcl::RenderContext& rRenderContext, const SpinbuttonValue& rSpinbuttonValue)
{
bool bNativeOK = false;
if (rRenderContext.IsNativeControlSupported(ControlType::SpinButtons, ControlPart::Entire))
{
tools::Rectangle aArea = rSpinbuttonValue.maUpperRect.GetUnion(rSpinbuttonValue.maLowerRect);
// only paint the standalone spin buttons, all buttons are painted at once
bNativeOK = rRenderContext.DrawNativeControl(ControlType::SpinButtons, ControlPart::AllButtons, aArea,
ControlState::ENABLED, rSpinbuttonValue, OUString());
}
return bNativeOK;
}
}
void ImplDrawSpinButton(vcl::RenderContext& rRenderContext, vcl::Window* pWindow,
const tools::Rectangle& rUpperRect, const tools::Rectangle& rLowerRect,
bool bUpperIn, bool bLowerIn, bool bUpperEnabled, bool bLowerEnabled,
bool bHorz, bool bMirrorHorz)
{
bool bNativeOK = false;
if (pWindow)
{
// are we drawing standalone spin buttons or members of a spinfield ?
ControlType aControl = ControlType::SpinButtons;
switch (pWindow->GetType())
{
case WindowType::EDIT:
case WindowType::MULTILINEEDIT:
case WindowType::PATTERNFIELD:
case WindowType::METRICFIELD:
case WindowType::CURRENCYFIELD:
case WindowType::DATEFIELD:
case WindowType::TIMEFIELD:
case WindowType::SPINFIELD:
case WindowType::FORMATTEDFIELD:
aControl = ControlType::Spinbox;
break;
default:
aControl = ControlType::SpinButtons;
break;
}
SpinbuttonValue aValue;
ImplGetSpinbuttonValue(pWindow, rUpperRect, rLowerRect,
bUpperIn, bLowerIn, bUpperEnabled, bLowerEnabled,
bHorz, aValue);
if( aControl == ControlType::Spinbox )
bNativeOK = ImplDrawNativeSpinfield(rRenderContext, pWindow, aValue);
else if( aControl == ControlType::SpinButtons )
bNativeOK = ImplDrawNativeSpinbuttons(rRenderContext, aValue);
}
if (bNativeOK)
return;
ImplDrawUpDownButtons(rRenderContext,
rUpperRect, rLowerRect,
bUpperIn, bLowerIn, bUpperEnabled, bLowerEnabled,
bHorz, bMirrorHorz);
}
void ImplDrawUpDownButtons(vcl::RenderContext& rRenderContext,
const tools::Rectangle& rUpperRect, const tools::Rectangle& rLowerRect,
bool bUpperIn, bool bLowerIn, bool bUpperEnabled, bool bLowerEnabled,
bool bHorz, bool bMirrorHorz)
{
DecorationView aDecoView(&rRenderContext);
SymbolType eType1, eType2;
if ( bHorz )
{
eType1 = bMirrorHorz ? SymbolType::SPIN_RIGHT : SymbolType::SPIN_LEFT;
eType2 = bMirrorHorz ? SymbolType::SPIN_LEFT : SymbolType::SPIN_RIGHT;
}
else
{
eType1 = SymbolType::SPIN_UP;
eType2 = SymbolType::SPIN_DOWN;
}
DrawButtonFlags nStyle = DrawButtonFlags::NoLeftLightBorder;
// draw upper/left Button
if (bUpperIn)
nStyle |= DrawButtonFlags::Pressed;
tools::Rectangle aUpRect = aDecoView.DrawButton(rUpperRect, nStyle);
nStyle = DrawButtonFlags::NoLeftLightBorder;
// draw lower/right Button
if (bLowerIn)
nStyle |= DrawButtonFlags::Pressed;
tools::Rectangle aLowRect = aDecoView.DrawButton(rLowerRect, nStyle);
// make use of additional default edge
aUpRect.AdjustLeft( -1 );
aUpRect.AdjustTop( -1 );
aUpRect.AdjustRight( 1 );
aUpRect.AdjustBottom( 1 );
aLowRect.AdjustLeft( -1 );
aLowRect.AdjustTop( -1 );
aLowRect.AdjustRight( 1 );
aLowRect.AdjustBottom( 1 );
// draw into the edge, so that something is visible if the rectangle is too small
if (aUpRect.GetHeight() < 4)
{
aUpRect.AdjustRight( 1 );
aUpRect.AdjustBottom( 1 );
aLowRect.AdjustRight( 1 );
aLowRect.AdjustBottom( 1 );
}
// calculate Symbol size
tools::Long nTempSize1 = aUpRect.GetWidth();
tools::Long nTempSize2 = aLowRect.GetWidth();
if (std::abs( nTempSize1-nTempSize2 ) == 1)
{
if (nTempSize1 > nTempSize2)
aUpRect.AdjustLeft( 1 );
else
aLowRect.AdjustLeft( 1 );
}
nTempSize1 = aUpRect.GetHeight();
nTempSize2 = aLowRect.GetHeight();
if (std::abs(nTempSize1 - nTempSize2) == 1)
{
if (nTempSize1 > nTempSize2)
aUpRect.AdjustTop( 1 );
else
aLowRect.AdjustTop( 1 );
}
const StyleSettings& rStyleSettings = rRenderContext.GetSettings().GetStyleSettings();
DrawSymbolFlags nSymStyle = DrawSymbolFlags::NONE;
if (!bUpperEnabled)
nSymStyle |= DrawSymbolFlags::Disable;
aDecoView.DrawSymbol(aUpRect, eType1, rStyleSettings.GetButtonTextColor(), nSymStyle);
nSymStyle = DrawSymbolFlags::NONE;
if (!bLowerEnabled)
nSymStyle |= DrawSymbolFlags::Disable;
aDecoView.DrawSymbol(aLowRect, eType2, rStyleSettings.GetButtonTextColor(), nSymStyle);
}
void SpinField::ImplInitSpinFieldData()
{
mpEdit.disposeAndClear();
mbSpin = false;
mbRepeat = false;
mbUpperIn = false;
mbLowerIn = false;
mbInitialUp = false;
mbInitialDown = false;
mbInDropDown = false;
mbUpperEnabled = true;
mbLowerEnabled = true;
}
void SpinField::ImplInit(vcl::Window* pParent, WinBits nWinStyle)
{
Edit::ImplInit( pParent, nWinStyle );
if (!(nWinStyle & (WB_SPIN | WB_DROPDOWN)))
return;
mbSpin = true;
// Some themes want external spin buttons, therefore the main
// spinfield should not overdraw the border between its encapsulated
// edit field and the spin buttons
if ((nWinStyle & WB_SPIN) && ImplUseNativeBorder(*GetOutDev(), nWinStyle))
{
SetBackground();
mpEdit.set(VclPtr<Edit>::Create(this, WB_NOBORDER));
mpEdit->SetBackground();
}
else
mpEdit.set(VclPtr<Edit>::Create(this, WB_NOBORDER));
mpEdit->EnableRTL(false);
mpEdit->SetPosPixel(Point());
mpEdit->Show();
SetSubEdit(mpEdit);
maRepeatTimer.SetInvokeHandler(LINK( this, SpinField, ImplTimeout));
maRepeatTimer.SetTimeout(MouseSettings::GetButtonStartRepeat());
if (nWinStyle & WB_REPEAT)
mbRepeat = true;
SetCompoundControl(true);
}
SpinField::SpinField(vcl::Window* pParent, WinBits nWinStyle, WindowType nType) :
Edit(nType), maRepeatTimer("SpinField maRepeatTimer")
{
ImplInitSpinFieldData();
ImplInit(pParent, nWinStyle);
}
SpinField::~SpinField()
{
disposeOnce();
}
void SpinField::dispose()
{
mpEdit.disposeAndClear();
Edit::dispose();
}
void SpinField::Up()
{
ImplCallEventListenersAndHandler( VclEventId::SpinfieldUp, [this] () { maUpHdlLink.Call(*this); } );
}
void SpinField::Down()
{
ImplCallEventListenersAndHandler( VclEventId::SpinfieldDown, [this] () { maDownHdlLink.Call(*this); } );
}
void SpinField::First()
{
ImplCallEventListenersAndHandler(VclEventId::SpinfieldFirst, nullptr);
}
void SpinField::Last()
{
ImplCallEventListenersAndHandler(VclEventId::SpinfieldLast, nullptr);
}
void SpinField::MouseButtonDown( const MouseEvent& rMEvt )
{
if (!HasFocus() && (!mpEdit || !mpEdit->HasFocus()))
{
GrabFocus();
}
if (!IsReadOnly())
{
if (maUpperRect.Contains(rMEvt.GetPosPixel()))
{
mbUpperIn = true;
mbInitialUp = true;
Invalidate(maUpperRect);
}
else if (maLowerRect.Contains(rMEvt.GetPosPixel()))
{
mbLowerIn = true;
mbInitialDown = true;
Invalidate(maLowerRect);
}
else if (maDropDownRect.Contains(rMEvt.GetPosPixel()))
{
// put DropDownButton to the right
mbInDropDown = ShowDropDown( !mbInDropDown );
Invalidate(tools::Rectangle(Point(), GetOutputSizePixel()));
}
if (mbUpperIn || mbLowerIn)
{
CaptureMouse();
if (mbRepeat)
maRepeatTimer.Start();
return;
}
}
Edit::MouseButtonDown(rMEvt);
}
void SpinField::MouseButtonUp(const MouseEvent& rMEvt)
{
ReleaseMouse();
mbInitialUp = mbInitialDown = false;
maRepeatTimer.Stop();
maRepeatTimer.SetTimeout(MouseSettings::GetButtonStartRepeat());
if (mbUpperIn)
{
mbUpperIn = false;
Invalidate(maUpperRect);
Up();
}
else if (mbLowerIn)
{
mbLowerIn = false;
Invalidate(maLowerRect);
Down();
}
Edit::MouseButtonUp(rMEvt);
}
void SpinField::MouseMove(const MouseEvent& rMEvt)
{
if (rMEvt.IsLeft())
{
if (mbInitialUp)
{
bool bNewUpperIn = maUpperRect.Contains(rMEvt.GetPosPixel());
if (bNewUpperIn != mbUpperIn)
{
if (bNewUpperIn)
{
if (mbRepeat)
maRepeatTimer.Start();
}
else
maRepeatTimer.Stop();
mbUpperIn = bNewUpperIn;
Invalidate(maUpperRect);
}
}
else if (mbInitialDown)
{
bool bNewLowerIn = maLowerRect.Contains(rMEvt.GetPosPixel());
if (bNewLowerIn != mbLowerIn)
{
if (bNewLowerIn)
{
if (mbRepeat)
maRepeatTimer.Start();
}
else
maRepeatTimer.Stop();
mbLowerIn = bNewLowerIn;
Invalidate(maLowerRect);
}
}
}
Edit::MouseMove(rMEvt);
}
bool SpinField::EventNotify(NotifyEvent& rNEvt)
{
bool bDone = false;
if (rNEvt.GetType() == NotifyEventType::KEYINPUT)
{
const KeyEvent& rKEvt = *rNEvt.GetKeyEvent();
if (!IsReadOnly())
{
sal_uInt16 nMod = rKEvt.GetKeyCode().GetModifier();
switch (rKEvt.GetKeyCode().GetCode())
{
case KEY_UP:
{
if (!nMod)
{
Up();
bDone = true;
}
}
break;
case KEY_DOWN:
{
if (!nMod)
{
Down();
bDone = true;
}
else if ((nMod == KEY_MOD2) && !mbInDropDown && (GetStyle() & WB_DROPDOWN))
{
mbInDropDown = ShowDropDown(true);
Invalidate(tools::Rectangle(Point(), GetOutputSizePixel()));
bDone = true;
}
}
break;
case KEY_PAGEUP:
{
if (!nMod)
{
Last();
bDone = true;
}
}
break;
case KEY_PAGEDOWN:
{
if (!nMod)
{
First();
bDone = true;
}
}
break;
}
}
}
if (rNEvt.GetType() == NotifyEventType::COMMAND)
{
if ((rNEvt.GetCommandEvent()->GetCommand() == CommandEventId::Wheel) && !IsReadOnly())
{
const Point& rMousePos = rNEvt.GetCommandEvent()->GetMousePosPixel();
bool bMouseHovered = maUpperRect.Contains(rMousePos) || maLowerRect.Contains(rMousePos);
if (!bMouseHovered && mpEdit)
{
const tools::Rectangle aEditRect(mpEdit->GetPosPixel(), mpEdit->GetSizePixel());
bMouseHovered = aEditRect.Contains(rMousePos);
}
MouseWheelBehaviour nWheelBehavior(GetSettings().GetMouseSettings().GetWheelBehavior());
if (bMouseHovered
&& (nWheelBehavior == MouseWheelBehaviour::ALWAYS
|| (nWheelBehavior == MouseWheelBehaviour::FocusOnly && HasChildPathFocus())))
{
const CommandWheelData* pData = rNEvt.GetCommandEvent()->GetWheelData();
if (pData->GetMode() == CommandWheelMode::SCROLL)
{
if (pData->GetDelta() < 0)
Down();
else
Up();
bDone = true;
if (!HasChildPathFocus())
GrabFocus();
}
}
else
bDone = false; // don't eat this event, let the default handling happen (i.e. scroll the context)
}
}
return bDone || Edit::EventNotify(rNEvt);
}
void SpinField::FillLayoutData() const
{
if (mbSpin)
{
mxLayoutData.emplace();
AppendLayoutData(*GetSubEdit());
GetSubEdit()->SetLayoutDataParent(this);
}
else
Edit::FillLayoutData();
}
void SpinField::SetUpperEnabled(bool bEnabled)
{
if (mbUpperEnabled == bEnabled)
return;
mbUpperEnabled = bEnabled;
if (mbSpin)
Invalidate(maUpperRect);
}
void SpinField::SetLowerEnabled(bool bEnabled)
{
if (mbLowerEnabled == bEnabled)
return;
mbLowerEnabled = bEnabled;
if (mbSpin)
Invalidate(maLowerRect);
}
void SpinField::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle& rRect)
{
if (mbSpin)
{
bool bEnabled = IsEnabled();
bool bUpperEnabled = bEnabled && IsUpperEnabled();
bool bLowerEnabled = bEnabled && IsLowerEnabled();
ImplDrawSpinButton(rRenderContext, this, maUpperRect, maLowerRect,
mbUpperIn && bUpperEnabled, mbLowerIn && bLowerEnabled,
bUpperEnabled, bLowerEnabled);
}
if (GetStyle() & WB_DROPDOWN)
{
DecorationView aView(&rRenderContext);
DrawButtonFlags nStyle = DrawButtonFlags::NoLightBorder;
if (mbInDropDown)
nStyle |= DrawButtonFlags::Pressed;
tools::Rectangle aInnerRect = aView.DrawButton(maDropDownRect, nStyle);
DrawSymbolFlags nSymbolStyle = IsEnabled() ? DrawSymbolFlags::NONE : DrawSymbolFlags::Disable;
aView.DrawSymbol(aInnerRect, SymbolType::SPIN_DOWN, rRenderContext.GetSettings().GetStyleSettings().GetButtonTextColor(), nSymbolStyle);
}
Edit::Paint(rRenderContext, rRect);
}
void SpinField::ImplCalcButtonAreas(const OutputDevice* pDev, const Size& rOutSz, tools::Rectangle& rDDArea,
tools::Rectangle& rSpinUpArea, tools::Rectangle& rSpinDownArea)
{
const StyleSettings& rStyleSettings = pDev->GetSettings().GetStyleSettings();
Size aSize = rOutSz;
Size aDropDownSize;
if (GetStyle() & WB_DROPDOWN)
{
tools::Long nW = rStyleSettings.GetScrollBarSize();
nW = GetDrawPixel( pDev, nW );
aDropDownSize = Size( CalcZoom( nW ), aSize.Height() );
aSize.AdjustWidth( -(aDropDownSize.Width()) );
rDDArea = tools::Rectangle( Point( aSize.Width(), 0 ), aDropDownSize );
rDDArea.AdjustTop( -1 );
}
else
rDDArea.SetEmpty();
// calculate sizes according to the height
if (GetStyle() & WB_SPIN)
{
tools::Long nBottom1 = aSize.Height()/2;
tools::Long nBottom2 = aSize.Height()-1;
tools::Long nTop2 = nBottom1;
if ( !(aSize.Height() & 0x01) )
nBottom1--;
bool bNativeRegionOK = false;
tools::Rectangle aContentUp, aContentDown;
if ((pDev->GetOutDevType() == OUTDEV_WINDOW) &&
// there is just no useful native support for spinfields with dropdown
! (GetStyle() & WB_DROPDOWN) &&
IsNativeControlSupported(ControlType::Spinbox, ControlPart::Entire))
{
vcl::Window *pWin = pDev->GetOwnerWindow();
vcl::Window *pBorder = pWin->GetWindow( GetWindowType::Border );
// get the system's spin button size
ImplControlValue aControlValue;
tools::Rectangle aBound;
Point aPoint;
// use the full extent of the control
tools::Rectangle aArea( aPoint, pBorder->GetOutputSizePixel() );
bNativeRegionOK =
pWin->GetNativeControlRegion(ControlType::Spinbox, ControlPart::ButtonUp,
aArea, ControlState::NONE, aControlValue, aBound, aContentUp) &&
pWin->GetNativeControlRegion(ControlType::Spinbox, ControlPart::ButtonDown,
aArea, ControlState::NONE, aControlValue, aBound, aContentDown);
if (bNativeRegionOK)
{
// convert back from border space to local coordinates
aPoint = pBorder->ScreenToOutputPixel( pWin->OutputToScreenPixel( aPoint ) );
aContentUp.Move(-aPoint.X(), -aPoint.Y());
aContentDown.Move(-aPoint.X(), -aPoint.Y());
}
}
if (bNativeRegionOK)
{
rSpinUpArea = aContentUp;
rSpinDownArea = aContentDown;
}
else
{
aSize.AdjustWidth( -(CalcZoom( GetDrawPixel( pDev, rStyleSettings.GetSpinSize() ) )) );
rSpinUpArea = tools::Rectangle( aSize.Width(), 0, rOutSz.Width()-aDropDownSize.Width()-1, nBottom1 );
rSpinDownArea = tools::Rectangle( rSpinUpArea.Left(), nTop2, rSpinUpArea.Right(), nBottom2 );
}
}
else
{
rSpinUpArea.SetEmpty();
rSpinDownArea.SetEmpty();
}
}
void SpinField::Resize()
{
if (!mbSpin)
return;
Control::Resize();
Size aSize = GetOutputSizePixel();
bool bSubEditPositioned = false;
if (GetStyle() & (WB_SPIN | WB_DROPDOWN))
{
ImplCalcButtonAreas( GetOutDev(), aSize, maDropDownRect, maUpperRect, maLowerRect );
ImplControlValue aControlValue;
Point aPoint;
tools::Rectangle aContent, aBound;
// use the full extent of the control
vcl::Window *pBorder = GetWindow( GetWindowType::Border );
tools::Rectangle aArea( aPoint, pBorder->GetOutputSizePixel() );
// adjust position and size of the edit field
if (GetNativeControlRegion(ControlType::Spinbox, ControlPart::SubEdit, aArea, ControlState::NONE,
aControlValue, aBound, aContent) &&
// there is just no useful native support for spinfields with dropdown
!(GetStyle() & WB_DROPDOWN))
{
// convert back from border space to local coordinates
aPoint = pBorder->ScreenToOutputPixel(OutputToScreenPixel(aPoint));
aContent.Move(-aPoint.X(), -aPoint.Y());
// use the themes drop down size
mpEdit->SetPosPixel( aContent.TopLeft() );
bSubEditPositioned = true;
aSize = aContent.GetSize();
}
else
{
if (maUpperRect.IsEmpty())
{
SAL_WARN_IF( maDropDownRect.IsEmpty(), "vcl", "SpinField::Resize: SPIN && DROPDOWN, but all empty rects?" );
aSize.setWidth( maDropDownRect.Left() );
}
else
aSize.setWidth( maUpperRect.Left() );
}
}
if (!bSubEditPositioned)
{
// this moves our sub edit if RTL gets switched
mpEdit->SetPosPixel(Point());
}
mpEdit->SetSizePixel(aSize);
if (GetStyle() & WB_SPIN)
Invalidate(tools::Rectangle(maUpperRect.TopLeft(), maLowerRect.BottomRight()));
if (GetStyle() & WB_DROPDOWN)
Invalidate(maDropDownRect);
}
void SpinField::StateChanged(StateChangedType nType)
{
Edit::StateChanged(nType);
if (nType == StateChangedType::Enable)
{
if (mbSpin || (GetStyle() & WB_DROPDOWN))
{
mpEdit->Enable(IsEnabled());
if (mbSpin)
{
Invalidate(maLowerRect);
Invalidate(maUpperRect);
}
if (GetStyle() & WB_DROPDOWN)
Invalidate(maDropDownRect);
}
}
else if (nType == StateChangedType::Style)
{
if (GetStyle() & WB_REPEAT)
mbRepeat = true;
else
mbRepeat = false;
}
else if (nType == StateChangedType::Zoom)
{
Resize();
if (mpEdit)
mpEdit->SetZoom(GetZoom());
Invalidate();
}
else if (nType == StateChangedType::ControlFont)
{
if (mpEdit)
mpEdit->SetControlFont(GetControlFont());
Invalidate();
}
else if (nType == StateChangedType::ControlForeground)
{
if (mpEdit)
mpEdit->SetControlForeground(GetControlForeground());
Invalidate();
}
else if (nType == StateChangedType::ControlBackground)
{
if (mpEdit)
mpEdit->SetControlBackground(GetControlBackground());
Invalidate();
}
else if( nType == StateChangedType::Mirroring )
{
if (mpEdit)
mpEdit->CompatStateChanged(StateChangedType::Mirroring);
Resize();
}
}
void SpinField::DataChanged( const DataChangedEvent& rDCEvt )
{
Edit::DataChanged(rDCEvt);
if ((rDCEvt.GetType() == DataChangedEventType::SETTINGS) &&
(rDCEvt.GetFlags() & AllSettingsFlags::STYLE))
{
Resize();
Invalidate();
}
}
tools::Rectangle* SpinField::ImplFindPartRect(const Point& rPt)
{
if (maUpperRect.Contains(rPt))
return &maUpperRect;
else if (maLowerRect.Contains(rPt))
return &maLowerRect;
else
return nullptr;
}
bool SpinField::PreNotify(NotifyEvent& rNEvt)
{
if (rNEvt.GetType() == NotifyEventType::MOUSEMOVE)
{
const MouseEvent* pMouseEvt = rNEvt.GetMouseEvent();
if (pMouseEvt && !pMouseEvt->GetButtons() && !pMouseEvt->IsSynthetic() && !pMouseEvt->IsModifierChanged())
{
// trigger redraw if mouse over state has changed
if( IsNativeControlSupported(ControlType::Spinbox, ControlPart::Entire) ||
IsNativeControlSupported(ControlType::Spinbox, ControlPart::AllButtons) )
{
tools::Rectangle* pRect = ImplFindPartRect( GetPointerPosPixel() );
tools::Rectangle* pLastRect = ImplFindPartRect( GetLastPointerPosPixel() );
if( pRect != pLastRect || (pMouseEvt->IsLeaveWindow() || pMouseEvt->IsEnterWindow()) )
{
if (!IsNativeWidgetEnabled() ||
!IsNativeControlSupported(ControlType::Editbox, ControlPart::Entire))
{
// paint directly
vcl::Region aRgn( GetOutDev()->GetActiveClipRegion() );
if (pLastRect)
{
GetOutDev()->SetClipRegion(vcl::Region(*pLastRect));
Invalidate(*pLastRect);
GetOutDev()->SetClipRegion( aRgn );
}
if (pRect)
{
GetOutDev()->SetClipRegion(vcl::Region(*pRect));
Invalidate(*pRect);
GetOutDev()->SetClipRegion( aRgn );
}
}
}
}
}
}
return Edit::PreNotify(rNEvt);
}
void SpinField::EndDropDown()
{
mbInDropDown = false;
Invalidate(tools::Rectangle(Point(), GetOutputSizePixel()));
}
bool SpinField::ShowDropDown( bool )
{
return false;
}
Size SpinField::CalcMinimumSizeForText(const OUString &rString) const
{
Size aSz = Edit::CalcMinimumSizeForText(rString);
if ( GetStyle() & WB_DROPDOWN )
aSz.AdjustWidth(GetSettings().GetStyleSettings().GetScrollBarSize() );
if ( GetStyle() & WB_SPIN )
{
ImplControlValue aControlValue;
tools::Rectangle aArea( Point(), Size(100, aSz.Height()));
tools::Rectangle aEntireBound, aEntireContent, aEditBound, aEditContent;
if (
GetNativeControlRegion(ControlType::Spinbox, ControlPart::Entire,
aArea, ControlState::NONE, aControlValue, aEntireBound, aEntireContent) &&
GetNativeControlRegion(ControlType::Spinbox, ControlPart::SubEdit,
aArea, ControlState::NONE, aControlValue, aEditBound, aEditContent)
)
{
aSz.AdjustWidth(aEntireContent.GetWidth() - aEditContent.GetWidth());
}
else
{
aSz.AdjustWidth(maUpperRect.GetWidth() );
}
}
return aSz;
}
Size SpinField::CalcMinimumSize() const
{
return CalcMinimumSizeForText(GetText());
}
Size SpinField::GetOptimalSize() const
{
return CalcMinimumSize();
}
Size SpinField::CalcSize(sal_Int32 nChars) const
{
Size aSz = Edit::CalcSize( nChars );
if ( GetStyle() & WB_DROPDOWN )
aSz.AdjustWidth(GetSettings().GetStyleSettings().GetScrollBarSize() );
if ( GetStyle() & WB_SPIN )
aSz.AdjustWidth(GetSettings().GetStyleSettings().GetSpinSize() );
return aSz;
}
IMPL_LINK( SpinField, ImplTimeout, Timer*, pTimer, void )
{
if ( pTimer->GetTimeout() == static_cast<sal_uInt64>(MouseSettings::GetButtonStartRepeat()) )
{
pTimer->SetTimeout( GetSettings().GetMouseSettings().GetButtonRepeat() );
pTimer->Start();
}
else
{
if ( mbInitialUp )
Up();
else
Down();
}
}
void SpinField::Draw(OutputDevice* pDev, const Point& rPos, SystemTextColorFlags nFlags)
{
Edit::Draw(pDev, rPos, nFlags);
WinBits nFieldStyle = GetStyle();
if ( (nFlags & SystemTextColorFlags::NoControls ) || !( nFieldStyle & (WB_SPIN|WB_DROPDOWN) ) )
return;
Point aPos = pDev->LogicToPixel( rPos );
Size aSize = GetSizePixel();
AllSettings aOldSettings = pDev->GetSettings();
pDev->Push();
pDev->SetMapMode();
tools::Rectangle aDD, aUp, aDown;
ImplCalcButtonAreas(pDev, aSize, aDD, aUp, aDown);
aDD.Move(aPos.X(), aPos.Y());
aUp.Move(aPos.X(), aPos.Y());
aUp.AdjustTop( 1 );
aDown.Move(aPos.X(), aPos.Y());
Color aButtonTextColor;
if (nFlags & SystemTextColorFlags::Mono)
aButtonTextColor = COL_BLACK;
else
aButtonTextColor = GetSettings().GetStyleSettings().GetButtonTextColor();
if (GetStyle() & WB_DROPDOWN)
{
DecorationView aView( pDev );
tools::Rectangle aInnerRect = aView.DrawButton( aDD, DrawButtonFlags::NoLightBorder );
DrawSymbolFlags nSymbolStyle = IsEnabled() ? DrawSymbolFlags::NONE : DrawSymbolFlags::Disable;
aView.DrawSymbol(aInnerRect, SymbolType::SPIN_DOWN, aButtonTextColor, nSymbolStyle);
}
if (GetStyle() & WB_SPIN)
{
ImplDrawSpinButton(*pDev, this, aUp, aDown, false, false);
}
pDev->Pop();
pDev->SetSettings(aOldSettings);
}
FactoryFunction SpinField::GetUITestFactory() const
{
return SpinFieldUIObject::create;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'Union' is required to be utilized.
↑ V1048 The 'aControl' variable was assigned the same value.