/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */
 
#include <sal/config.h>
 
#include "submissionhandler.hxx"
#include "formmetadata.hxx"
#include "formstrings.hxx"
#include "handlerhelper.hxx"
 
#include <com/sun/star/form/FormButtonType.hpp>
#include <com/sun/star/form/submission/XSubmissionSupplier.hpp>
#include <com/sun/star/inspection/XObjectInspectorUI.hpp>
#include <com/sun/star/lang/NullPointerException.hpp>
#include <tools/debug.hxx>
#include <comphelper/diagnose_ex.hxx>
 
 
namespace pcr
{
 
 
    using namespace ::comphelper;
    using namespace ::com::sun::star;
    using namespace ::com::sun::star::uno;
    using namespace ::com::sun::star::lang;
    using namespace ::com::sun::star::beans;
    using namespace ::com::sun::star::form;
    using namespace ::com::sun::star::xforms;
    using namespace ::com::sun::star::inspection;
 
 
    //= SubmissionHelper
 
 
    SubmissionHelper::SubmissionHelper( ::osl::Mutex& _rMutex, const Reference< XPropertySet >& _rxIntrospectee, const Reference< frame::XModel >& _rxContextDocument )
        :EFormsHelper( _rMutex, _rxIntrospectee, _rxContextDocument )
    {
        OSL_ENSURE( canTriggerSubmissions( _rxIntrospectee, _rxContextDocument ),
            "SubmissionHelper::SubmissionHelper: you should not have instantiated me!" );
    }
 
 
    bool SubmissionHelper::canTriggerSubmissions( const Reference< XPropertySet >& _rxControlModel,
        const Reference< frame::XModel >& _rxContextDocument )
    {
        if ( !EFormsHelper::isEForm( _rxContextDocument ) )
            return false;
 
        try
        {
            Reference< submission::XSubmissionSupplier > xSubmissionSupp( _rxControlModel, UNO_QUERY );
            if ( xSubmissionSupp.is() )
                return true;
        }
        catch( const Exception& )
        {
            TOOLS_WARN_EXCEPTION( "extensions.propctrlr", "SubmissionHelper::canTriggerSubmissions" );
        }
        return false;
    }
 
 
    //= SubmissionPropertyHandler
 
 
    SubmissionPropertyHandler::SubmissionPropertyHandler( const Reference< XComponentContext >& _rxContext )
        :PropertyHandlerComponent( _rxContext )
        ,OPropertyChangeListener()
    {
    }
 
 
    SubmissionPropertyHandler::~SubmissionPropertyHandler( )
    {
        disposeAdapter();
    }
 
 
    OUString SubmissionPropertyHandler::getImplementationName(  )
    {
        return u"com.sun.star.comp.extensions.SubmissionPropertyHandler"_ustr;
    }
 
 
    Sequence< OUString > SubmissionPropertyHandler::getSupportedServiceNames(  )
    {
        return { u"com.sun.star.form.inspection.SubmissionPropertyHandler"_ustr };
    }
 
 
    Any SAL_CALL SubmissionPropertyHandler::getPropertyValue( const OUString& _rPropertyName )
    {
        ::osl::MutexGuard aGuard( m_aMutex );
        PropertyId nPropId( impl_getPropertyId_throwUnknownProperty( _rPropertyName ) );
 
        OSL_ENSURE(m_pHelper, "SubmissionPropertyHandler::getPropertyValue: inconsistency!");
        // if we survived impl_getPropertyId_throwUnknownProperty, we should have a helper, since no helper implies no properties
 
        Any aReturn;
        try
        {
            switch ( nPropId )
            {
            case PROPERTY_ID_SUBMISSION_ID:
            {
                Reference< submission::XSubmissionSupplier > xSubmissionSupp( m_xComponent, UNO_QUERY );
                OSL_ENSURE( xSubmissionSupp.is(), "SubmissionPropertyHandler::getPropertyValue: this should never happen ..." );
                    // this handler is not intended for components which are no XSubmissionSupplier
                Reference< submission::XSubmission > xSubmission;
                if ( xSubmissionSupp.is() )
                    xSubmission = xSubmissionSupp->getSubmission( );
                aReturn <<= xSubmission;
            }
            break;
 
            case PROPERTY_ID_XFORMS_BUTTONTYPE:
            {
                FormButtonType eType = FormButtonType_PUSH;
                OSL_VERIFY( m_xComponent->getPropertyValue( PROPERTY_BUTTONTYPE ) >>= eType );
                if ( ( eType != FormButtonType_PUSH ) && ( eType != FormButtonType_SUBMIT ) )
                    eType = FormButtonType_PUSH;
                aReturn <<= eType;
            }
            break;
 
            default:
                OSL_FAIL( "SubmissionPropertyHandler::getPropertyValue: cannot handle this property!" );
                break;
            }
        }
        catch( const Exception& )
        {
            TOOLS_WARN_EXCEPTION( "extensions.propctrlr", "SubmissionPropertyHandler::getPropertyValue" );
        }
 
        return aReturn;
    }
 
 
    void SAL_CALL SubmissionPropertyHandler::setPropertyValue( const OUString& _rPropertyName, const Any& _rValue )
    {
        ::osl::MutexGuard aGuard( m_aMutex );
        PropertyId nPropId( impl_getPropertyId_throwUnknownProperty( _rPropertyName ) );
 
        OSL_ENSURE(m_pHelper, "SubmissionPropertyHandler::setPropertyValue: inconsistency!");
        // if we survived impl_getPropertyId_throwUnknownProperty, we should have a helper, since no helper implies no properties
 
        try
        {
            switch ( nPropId )
            {
            case PROPERTY_ID_SUBMISSION_ID:
            {
                Reference< submission::XSubmission > xSubmission;
                OSL_VERIFY( _rValue >>= xSubmission );
 
                Reference< submission::XSubmissionSupplier > xSubmissionSupp( m_xComponent, UNO_QUERY );
                OSL_ENSURE( xSubmissionSupp.is(), "SubmissionPropertyHandler::setPropertyValue: this should never happen ..." );
                    // this handler is not intended for components which are no XSubmissionSupplier
                if ( xSubmissionSupp.is() )
                {
                    xSubmissionSupp->setSubmission( xSubmission );
                    impl_setContextDocumentModified_nothrow();
                }
            }
            break;
 
            case PROPERTY_ID_XFORMS_BUTTONTYPE:
                m_xComponent->setPropertyValue( PROPERTY_BUTTONTYPE, _rValue );
                break;
 
            default:
                OSL_FAIL( "SubmissionPropertyHandler::setPropertyValue: cannot handle this id!" );
            }
        }
        catch( const Exception& )
        {
            TOOLS_WARN_EXCEPTION( "extensions.propctrlr", "SubmissionPropertyHandler::setPropertyValue" );
        }
    }
 
 
    Sequence< OUString > SAL_CALL SubmissionPropertyHandler::getActuatingProperties( )
    {
        ::osl::MutexGuard aGuard( m_aMutex );
        if (!m_pHelper)
            return Sequence< OUString >();
 
        Sequence<OUString> aReturn { PROPERTY_XFORMS_BUTTONTYPE };
        return aReturn;
    }
 
 
    Sequence< OUString > SAL_CALL SubmissionPropertyHandler::getSupersededProperties( )
    {
        ::osl::MutexGuard aGuard( m_aMutex );
        if (!m_pHelper)
            return Sequence< OUString >();
 
        Sequence< OUString > aReturn{ PROPERTY_TARGET_URL,
                                      PROPERTY_TARGET_FRAME,
                                      PROPERTY_BUTTONTYPE };
        return aReturn;
    }
 
 
    void SubmissionPropertyHandler::onNewComponent()
    {
        if ( m_xPropChangeMultiplexer.is() )
        {
            m_xPropChangeMultiplexer->dispose();
            m_xPropChangeMultiplexer.clear();
        }
 
        PropertyHandlerComponent::onNewComponent();
 
        Reference< frame::XModel > xDocument( impl_getContextDocument_nothrow() );
        DBG_ASSERT( xDocument.is(), "SubmissionPropertyHandler::onNewComponent: no document!" );
 
        m_pHelper.reset();
 
        if ( SubmissionHelper::canTriggerSubmissions( m_xComponent, xDocument ) )
        {
            m_pHelper.reset( new SubmissionHelper( m_aMutex, m_xComponent, xDocument ) );
 
            m_xPropChangeMultiplexer = new OPropertyChangeMultiplexer( this, m_xComponent );
            m_xPropChangeMultiplexer->addProperty( PROPERTY_BUTTONTYPE );
        }
    }
 
 
    Sequence< Property > SubmissionPropertyHandler::doDescribeSupportedProperties() const
    {
        std::vector< Property > aProperties;
        if (m_pHelper)
        {
            implAddPropertyDescription( aProperties, PROPERTY_SUBMISSION_ID, cppu::UnoType<submission::XSubmission>::get() );
            implAddPropertyDescription( aProperties, PROPERTY_XFORMS_BUTTONTYPE, ::cppu::UnoType<FormButtonType>::get() );
        }
        if ( aProperties.empty() )
            return Sequence< Property >();
        return comphelper::containerToSequence(aProperties);
    }
 
 
    LineDescriptor SAL_CALL SubmissionPropertyHandler::describePropertyLine( const OUString& _rPropertyName,
        const Reference< XPropertyControlFactory >& _rxControlFactory )
    {
        ::osl::MutexGuard aGuard( m_aMutex );
        if ( !_rxControlFactory.is() )
            throw NullPointerException();
        if (!m_pHelper)
            throw RuntimeException();
 
        std::vector< OUString > aListEntries;
        PropertyId nPropId( impl_getPropertyId_throwUnknownProperty( _rPropertyName ) );
        switch ( nPropId )
        {
        case PROPERTY_ID_SUBMISSION_ID:
            m_pHelper->getAllElementUINames(EFormsHelper::Submission, aListEntries, false);
            break;
 
        case PROPERTY_ID_XFORMS_BUTTONTYPE:
        {
            // available options are nearly the same as for the "normal" button type, but only the
            // first two options
            aListEntries = m_pInfoService->getPropertyEnumRepresentations( PROPERTY_ID_BUTTONTYPE );
            aListEntries.resize( 2 );
        }
        break;
 
        default:
            OSL_FAIL( "SubmissionPropertyHandler::describePropertyLine: cannot handle this id!" );
            return LineDescriptor();
        }
 
        LineDescriptor aDescriptor;
        aDescriptor.Control = PropertyHandlerHelper::createListBoxControl( _rxControlFactory, std::move(aListEntries), false, true );
        aDescriptor.DisplayName = m_pInfoService->getPropertyTranslation( nPropId );
        aDescriptor.Category = "General";
        aDescriptor.HelpURL = HelpIdUrl::getHelpURL( m_pInfoService->getPropertyHelpId( nPropId ) );
        return aDescriptor;
    }
 
 
    void SAL_CALL SubmissionPropertyHandler::actuatingPropertyChanged( const OUString& _rActuatingPropertyName, const Any& _rNewValue, const Any& /*_rOldValue*/, const Reference< XObjectInspectorUI >& _rxInspectorUI, sal_Bool )
    {
        if ( !_rxInspectorUI.is() )
            throw NullPointerException();
 
        ::osl::MutexGuard aGuard( m_aMutex );
        PropertyId nActuatingPropId( impl_getPropertyId_throwRuntime( _rActuatingPropertyName ) );
        OSL_PRECOND(m_pHelper,
                    "SubmissionPropertyHandler::actuatingPropertyChanged: inconsistency!");
        // if we survived impl_getPropertyId_throwRuntime, we should have a helper, since no helper implies no properties
 
        switch ( nActuatingPropId )
        {
        case PROPERTY_ID_XFORMS_BUTTONTYPE:
        {
            FormButtonType eType = FormButtonType_PUSH;
            OSL_VERIFY( _rNewValue >>= eType );
            _rxInspectorUI->enablePropertyUI( PROPERTY_SUBMISSION_ID, eType == FormButtonType_SUBMIT );
        }
        break;
 
        default:
            OSL_FAIL( "SubmissionPropertyHandler::actuatingPropertyChanged: cannot handle this id!" );
        }
    }
 
 
    Any SAL_CALL SubmissionPropertyHandler::convertToPropertyValue( const OUString& _rPropertyName, const Any& _rControlValue )
    {
        ::osl::MutexGuard aGuard( m_aMutex );
        Any aPropertyValue;
 
        OSL_ENSURE(
            m_pHelper,
            "SubmissionPropertyHandler::convertToPropertyValue: we have no SupportedProperties!");
        if (!m_pHelper)
            return aPropertyValue;
 
        OUString sControlValue;
        OSL_VERIFY( _rControlValue >>= sControlValue );
 
        PropertyId nPropId( m_pInfoService->getPropertyId( _rPropertyName ) );
        switch ( nPropId )
        {
        case PROPERTY_ID_SUBMISSION_ID:
        {
            Reference< XSubmission > xSubmission( m_pHelper->getModelElementFromUIName( EFormsHelper::Submission, sControlValue ), UNO_QUERY );
            aPropertyValue <<= xSubmission;
        }
        break;
 
        case PROPERTY_ID_XFORMS_BUTTONTYPE:
        {
            ::rtl::Reference< IPropertyEnumRepresentation > aEnumConversion(
                new DefaultEnumRepresentation( *m_pInfoService, ::cppu::UnoType<FormButtonType>::get(), PROPERTY_ID_BUTTONTYPE ) );
            // TODO/UNOize: make aEnumConversion a member?
            aEnumConversion->getValueFromDescription( sControlValue, aPropertyValue );
        }
        break;
 
        default:
            OSL_FAIL( "SubmissionPropertyHandler::convertToPropertyValue: cannot handle this id!" );
        }
 
        return aPropertyValue;
    }
 
 
    Any SAL_CALL SubmissionPropertyHandler::convertToControlValue( const OUString& _rPropertyName, const Any& _rPropertyValue, const Type& _rControlValueType )
    {
        ::osl::MutexGuard aGuard( m_aMutex );
        Any aControlValue;
 
        OSL_ENSURE(
            m_pHelper,
            "SubmissionPropertyHandler::convertToControlValue: we have no SupportedProperties!");
        if (!m_pHelper)
            return aControlValue;
 
        OSL_ENSURE( _rControlValueType.getTypeClass() == TypeClass_STRING,
            "SubmissionPropertyHandler::convertToControlValue: all our controls should use strings for value exchange!" );
 
        PropertyId nPropId( m_pInfoService->getPropertyId( _rPropertyName ) );
        switch ( nPropId )
        {
        case PROPERTY_ID_SUBMISSION_ID:
        {
            Reference< XPropertySet > xSubmission( _rPropertyValue, UNO_QUERY );
            if ( xSubmission.is() )
                aControlValue <<= EFormsHelper::getModelElementUIName( EFormsHelper::Submission, xSubmission );
        }
        break;
 
        case PROPERTY_ID_XFORMS_BUTTONTYPE:
        {
            ::rtl::Reference< IPropertyEnumRepresentation > aEnumConversion(
                new DefaultEnumRepresentation( *m_pInfoService, _rPropertyValue.getValueType(), PROPERTY_ID_BUTTONTYPE ) );
            // TODO/UNOize: make aEnumConversion a member?
            aControlValue <<= aEnumConversion->getDescriptionForValue( _rPropertyValue );
        }
        break;
 
        default:
            OSL_FAIL( "SubmissionPropertyHandler::convertToControlValue: cannot handle this id!" );
        }
 
        return aControlValue;
    }
 
 
    void SubmissionPropertyHandler::_propertyChanged( const PropertyChangeEvent& _rEvent )
    {
        if ( _rEvent.PropertyName == PROPERTY_BUTTONTYPE )
            firePropertyChange( PROPERTY_XFORMS_BUTTONTYPE, PROPERTY_ID_XFORMS_BUTTONTYPE, _rEvent.OldValue, _rEvent.NewValue );
    }
 
 
} // namespace pcr
 
extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
extensions_propctrlr_SubmissionPropertyHandler_get_implementation(
    css::uno::XComponentContext* context , css::uno::Sequence<css::uno::Any> const&)
{
    return cppu::acquire(new pcr::SubmissionPropertyHandler(context));
}
 
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */