/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <officecfg/Office/Calc.hxx>
#include <rangelst.hxx>
#include <scitems.hxx>
#include <editeng/editview.hxx>
#include <editeng/StripPortionsHelper.hxx>
#include <svx/fmshell.hxx>
#include <svx/sdr/overlay/overlaymanager.hxx>
#include <svx/svdoole2.hxx>
#include <sfx2/bindings.hxx>
#include <sfx2/lokhelper.hxx>
#include <sfx2/viewfrm.hxx>
#include <vcl/cursor.hxx>
#include <vcl/dndlistenercontainer.hxx>
#include <vcl/uitest/logger.hxx>
#include <vcl/uitest/eventdescription.hxx>
#include <sal/log.hxx>
#include <osl/diagnose.h>
#include <basegfx/polygon/b2dpolygontools.hxx>
#include <drawinglayer/primitive2d/PolyPolygonColorPrimitive2D.hxx>
#include <drawinglayer/primitive2d/transformprimitive2d.hxx>
#include <svx/sdr/overlay/overlayselection.hxx>
#include <svtools/optionsdrawinglayer.hxx>
#include <IAnyRefDialog.hxx>
#include <tabview.hxx>
#include <tabvwsh.hxx>
#include <docsh.hxx>
#include <gridwin.hxx>
#include <olinewin.hxx>
#include <overlayobject.hxx>
#include <colrowba.hxx>
#include <tabcont.hxx>
#include <scmod.hxx>
#include <sc.hrc>
#include <viewutil.hxx>
#include <editutil.hxx>
#include <inputhdl.hxx>
#include <inputwin.hxx>
#include <validat.hxx>
#include <inputopt.hxx>
#include <rfindlst.hxx>
#include <hiranges.hxx>
#include <viewuno.hxx>
#include <dpobject.hxx>
#include <seltrans.hxx>
#include <fillinfo.hxx>
#include <rangeutl.hxx>
#include <client.hxx>
#include <tabprotection.hxx>
#include <spellcheckcontext.hxx>
#include <markdata.hxx>
#include <formula/FormulaCompiler.hxx>
#include <comphelper/lok.hxx>
#include <comphelper/scopeguard.hxx>
#include <LibreOfficeKit/LibreOfficeKitEnums.h>
#include <output.hxx>
#include <utility>
#include <com/sun/star/chart2/data/HighlightedRange.hpp>
namespace
{
ScRange lcl_getSubRangeByIndex( const ScRange& rRange, sal_Int32 nIndex )
{
ScAddress aResult( rRange.aStart );
SCCOL nWidth = rRange.aEnd.Col() - rRange.aStart.Col() + 1;
SCROW nHeight = rRange.aEnd.Row() - rRange.aStart.Row() + 1;
SCTAB nDepth = rRange.aEnd.Tab() - rRange.aStart.Tab() + 1;
if( (nWidth > 0) && (nHeight > 0) && (nDepth > 0) )
{
// row by row from first to last sheet
sal_Int32 nArea = nWidth * nHeight;
aResult.IncCol( static_cast< SCCOL >( nIndex % nWidth ) );
aResult.IncRow( static_cast< SCROW >( (nIndex % nArea) / nWidth ) );
aResult.IncTab( static_cast< SCTAB >( nIndex / nArea ) );
if( !rRange.Contains( aResult ) )
aResult = rRange.aStart;
}
return ScRange( aResult );
}
} // anonymous namespace
using namespace com::sun::star;
ScExtraEditViewManager::~ScExtraEditViewManager()
{
DBG_ASSERT(nTotalWindows == 0, "ScExtraEditViewManager dtor: some out window has not yet been removed!");
}
inline void ScExtraEditViewManager::Add(SfxViewShell* pViewShell, ScSplitPos eWhich)
{
Apply<Adder>(pViewShell, eWhich);
}
inline void ScExtraEditViewManager::Remove(SfxViewShell* pViewShell, ScSplitPos eWhich)
{
Apply<Remover>(pViewShell, eWhich);
}
template<ScExtraEditViewManager::ModifierTagType ModifierTag>
void ScExtraEditViewManager::Apply(SfxViewShell* pViewShell, ScSplitPos eWhich)
{
ScTabViewShell* pOtherViewShell = dynamic_cast<ScTabViewShell*>(pViewShell);
if (pOtherViewShell == nullptr || pOtherViewShell == mpThisViewShell)
return;
mpOtherEditView = pOtherViewShell->GetViewData().GetEditView(eWhich);
if (mpOtherEditView != nullptr)
{
for (int i = 0; i < 4; ++i)
{
ScGridWindow* pWin = mpGridWin[i].get();
if (pWin != nullptr)
{
Modifier<ModifierTag>(pWin);
}
}
}
}
template<ScExtraEditViewManager::ModifierTagType ModifierTag>
void ScExtraEditViewManager::Modifier(ScGridWindow* /*pWin*/)
{
(void)this;
SAL_WARN("sc", "ScExtraEditViewManager::Modifier<ModifierTag>: non-specialized version should not be invoked.");
}
template<>
void ScExtraEditViewManager::Modifier<ScExtraEditViewManager::Adder>(ScGridWindow* pWin)
{
if (mpOtherEditView->AddOtherViewWindow(pWin))
++nTotalWindows;
}
template<>
void ScExtraEditViewManager::Modifier<ScExtraEditViewManager::Remover>(ScGridWindow* pWin)
{
if (mpOtherEditView->RemoveOtherViewWindow(pWin))
--nTotalWindows;
}
// --- public functions
void ScTabView::ClickCursor( SCCOL nPosX, SCROW nPosY, bool bControl )
{
ScDocument& rDoc = aViewData.GetDocument();
SCTAB nTab = aViewData.CurrentTabForData();
rDoc.SkipOverlapped(nPosX, nPosY, nTab);
ScModule* mod = ScModule::get();
bool bRefMode = mod->IsFormulaMode();
if ( bRefMode )
{
DoneRefMode();
if (bControl)
mod->AddRefEntry();
InitRefMode( nPosX, nPosY, nTab, SC_REFTYPE_REF );
}
else
{
DoneBlockMode( bControl );
aViewData.ResetOldCursor();
SetCursor( nPosX, nPosY );
}
}
void ScTabView::UpdateAutoFillMark(bool bFromPaste)
{
// single selection or cursor
ScRange aMarkRange;
ScMarkType eMarkType = aViewData.GetSimpleArea(aMarkRange);
bool bMarked = eMarkType == SC_MARK_SIMPLE || eMarkType == SC_MARK_SIMPLE_FILTERED;
for (sal_uInt16 i = 0; i < 4; i++)
{
if (pGridWin[i] && pGridWin[i]->IsVisible())
pGridWin[i]->UpdateAutoFillMark( bMarked, aMarkRange );
}
for (sal_uInt16 i = 0; i < 2; i++)
{
if (pColBar[i] && pColBar[i]->IsVisible())
pColBar[i]->SetMark( bMarked, aMarkRange.aStart.Col(), aMarkRange.aEnd.Col() );
if (pRowBar[i] && pRowBar[i]->IsVisible())
pRowBar[i]->SetMark( bMarked, aMarkRange.aStart.Row(), aMarkRange.aEnd.Row() );
}
// selection transfer object is checked together with AutoFill marks,
// because it has the same requirement of a single continuous block.
if (!bFromPaste)
CheckSelectionTransfer(); // update selection transfer object
}
void ScTabView::FakeButtonUp( ScSplitPos eWhich )
{
if (pGridWin[eWhich])
pGridWin[eWhich]->FakeButtonUp();
}
void ScTabView::HideAllCursors()
{
for (VclPtr<ScGridWindow> & pWin : pGridWin)
{
if (pWin && pWin->IsVisible())
{
vcl::Cursor* pCur = pWin->GetCursor();
if (pCur && pCur->IsVisible())
pCur->Hide();
pWin->HideCursor();
}
}
}
void ScTabView::ShowAllCursors()
{
for (VclPtr<ScGridWindow> & pWin : pGridWin)
{
if (pWin && pWin->IsVisible())
{
pWin->ShowCursor();
pWin->CursorChanged();
}
}
}
void ScTabView::ShowCursor()
{
pGridWin[aViewData.GetActivePart()]->ShowCursor();
pGridWin[aViewData.GetActivePart()]->CursorChanged();
}
void ScTabView::InvalidateAttribs()
{
SfxBindings& rBindings = aViewData.GetBindings();
rBindings.Invalidate( SID_STYLE_APPLY );
rBindings.Invalidate( SID_STYLE_FAMILY2 );
rBindings.Invalidate( SID_STYLE_FAMILY3 );
rBindings.Invalidate( SID_ATTR_CHAR_FONT );
rBindings.Invalidate( SID_ATTR_CHAR_FONTHEIGHT );
rBindings.Invalidate( SID_ATTR_CHAR_COLOR );
rBindings.Invalidate( SID_ATTR_CHAR_WEIGHT );
rBindings.Invalidate( SID_ATTR_CHAR_POSTURE );
rBindings.Invalidate( SID_ATTR_CHAR_UNDERLINE );
rBindings.Invalidate( SID_ULINE_VAL_NONE );
rBindings.Invalidate( SID_ULINE_VAL_SINGLE );
rBindings.Invalidate( SID_ULINE_VAL_DOUBLE );
rBindings.Invalidate( SID_ULINE_VAL_DOTTED );
rBindings.Invalidate( SID_ATTR_CHAR_OVERLINE );
rBindings.Invalidate( SID_ATTR_CHAR_KERNING );
rBindings.Invalidate( SID_SET_SUPER_SCRIPT );
rBindings.Invalidate( SID_SET_SUB_SCRIPT );
rBindings.Invalidate( SID_ATTR_CHAR_STRIKEOUT );
rBindings.Invalidate( SID_ATTR_CHAR_SHADOWED );
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_LEFT );
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_RIGHT );
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_BLOCK );
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_CENTER);
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_START );
rBindings.Invalidate( SID_ATTR_PARA_ADJUST_END );
rBindings.Invalidate( SID_NUMBER_TYPE_FORMAT);
rBindings.Invalidate( SID_ALIGNLEFT );
rBindings.Invalidate( SID_ALIGNRIGHT );
rBindings.Invalidate( SID_ALIGNBLOCK );
rBindings.Invalidate( SID_ALIGNCENTERHOR );
rBindings.Invalidate( SID_ALIGNTOP );
rBindings.Invalidate( SID_ALIGNBOTTOM );
rBindings.Invalidate( SID_ALIGNCENTERVER );
rBindings.Invalidate( SID_SCATTR_CELLPROTECTION );
// stuff for sidebar panels
{
rBindings.Invalidate( SID_H_ALIGNCELL );
rBindings.Invalidate( SID_V_ALIGNCELL );
rBindings.Invalidate( SID_ATTR_ALIGN_INDENT );
rBindings.Invalidate( SID_FRAME_LINECOLOR );
rBindings.Invalidate( SID_FRAME_LINESTYLE );
rBindings.Invalidate( SID_ATTR_BORDER_OUTER );
rBindings.Invalidate( SID_ATTR_BORDER_INNER );
rBindings.Invalidate( SID_ATTR_BORDER_DIAG_TLBR );
rBindings.Invalidate( SID_ATTR_BORDER_DIAG_BLTR );
rBindings.Invalidate( SID_NUMBER_TYPE_FORMAT );
}
rBindings.Invalidate( SID_BACKGROUND_COLOR );
rBindings.Invalidate( SID_ATTR_ALIGN_LINEBREAK );
rBindings.Invalidate( SID_NUMBER_FORMAT );
rBindings.Invalidate( SID_TEXTDIRECTION_LEFT_TO_RIGHT );
rBindings.Invalidate( SID_TEXTDIRECTION_TOP_TO_BOTTOM );
rBindings.Invalidate( SID_ATTR_PARA_LEFT_TO_RIGHT );
rBindings.Invalidate( SID_ATTR_PARA_RIGHT_TO_LEFT );
// pseudo slots for Format menu
rBindings.Invalidate( SID_ALIGN_ANY_HDEFAULT );
rBindings.Invalidate( SID_ALIGN_ANY_LEFT );
rBindings.Invalidate( SID_ALIGN_ANY_HCENTER );
rBindings.Invalidate( SID_ALIGN_ANY_RIGHT );
rBindings.Invalidate( SID_ALIGN_ANY_START );
rBindings.Invalidate( SID_ALIGN_ANY_END );
rBindings.Invalidate( SID_ALIGN_ANY_JUSTIFIED );
rBindings.Invalidate( SID_ALIGN_ANY_VDEFAULT );
rBindings.Invalidate( SID_ALIGN_ANY_TOP );
rBindings.Invalidate( SID_ALIGN_ANY_VCENTER );
rBindings.Invalidate( SID_ALIGN_ANY_BOTTOM );
rBindings.Invalidate( SID_NUMBER_CURRENCY );
rBindings.Invalidate( SID_NUMBER_SCIENTIFIC );
rBindings.Invalidate( SID_NUMBER_DATE );
rBindings.Invalidate( SID_NUMBER_CURRENCY );
rBindings.Invalidate( SID_NUMBER_PERCENT );
rBindings.Invalidate( SID_NUMBER_TWODEC );
rBindings.Invalidate( SID_NUMBER_TIME );
rBindings.Invalidate( SID_NUMBER_STANDARD );
rBindings.Invalidate( SID_NUMBER_THOUSANDS );
}
namespace {
void collectUIInformation(std::map<OUString, OUString>&& aParameters)
{
EventDescription aDescription;
aDescription.aID = "grid_window";
aDescription.aAction = "SELECT";
aDescription.aParameters = std::move(aParameters);
aDescription.aParent = "MainWindow";
aDescription.aKeyWord = "ScGridWinUIObject";
UITestLogger::getInstance().logEvent(aDescription);
}
}
// SetCursor - Cursor, set, draw, update InputWin
// or send reference
// Optimising breaks the functionality
void ScTabView::SetCursor( SCCOL nPosX, SCROW nPosY, bool bNew )
{
SCCOL nOldX = aViewData.GetCurX();
SCROW nOldY = aViewData.GetCurY();
// DeactivateIP only for MarkListHasChanged
// FIXME: this is to limit the number of rows handled in the Online
// to 1000; this will be removed again when the performance
// bottlenecks are sorted out
if (comphelper::LibreOfficeKit::isActive())
nPosY = std::min(nPosY, MAXTILEDROW);
if ( !(nPosX != nOldX || nPosY != nOldY || bNew) )
{
HighlightOverlay();
return;
}
ScTabViewShell* pViewShell = aViewData.GetViewShell();
bool bRefMode = pViewShell && pViewShell->IsRefInputMode();
if ( aViewData.HasEditView( aViewData.GetActivePart() ) && !bRefMode ) // 23259 or so
{
UpdateInputLine();
}
HideAllCursors();
aViewData.SetCurX( nPosX );
aViewData.SetCurY( nPosY );
ShowAllCursors();
HighlightOverlay();
CursorPosChanged();
OUString aCurrAddress = ScAddress(nPosX,nPosY,0).GetColRowString();
collectUIInformation({{"CELL", aCurrAddress}});
if (!comphelper::LibreOfficeKit::isActive())
return;
if (nPosX <= aViewData.GetMaxTiledCol() - 10 && nPosY <= aViewData.GetMaxTiledRow() - 25)
return;
ScDocument& rDoc = aViewData.GetDocument();
ScDocShell* pDocSh = aViewData.GetDocShell();
ScModelObj* pModelObj = pDocSh->GetModel();
Size aOldSize(0, 0);
if (pModelObj)
aOldSize = pModelObj->getDocumentSize();
if (nPosX > aViewData.GetMaxTiledCol() - 10)
aViewData.SetMaxTiledCol(std::min<SCCOL>(std::max(nPosX, aViewData.GetMaxTiledCol()) + 10, rDoc.MaxCol()));
if (nPosY > aViewData.GetMaxTiledRow() - 25)
aViewData.SetMaxTiledRow(std::min<SCROW>(std::max(nPosY, aViewData.GetMaxTiledRow()) + 25, MAXTILEDROW));
Size aNewSize(0, 0);
if (pModelObj)
aNewSize = pModelObj->getDocumentSize();
if (!pDocSh)
return;
if (pModelObj)
{
ScGridWindow* pGridWindow = aViewData.GetActiveWin();
if (pGridWindow)
{
Size aNewSizePx(aNewSize.Width() * aViewData.GetPPTX(), aNewSize.Height() * aViewData.GetPPTY());
if (aNewSizePx != pGridWindow->GetOutputSizePixel())
pGridWindow->SetOutputSizePixel(aNewSizePx);
}
}
if (aOldSize == aNewSize)
return;
// New area extended to the right of the sheet after last column
// including overlapping area with aNewRowArea
tools::Rectangle aNewColArea(aOldSize.getWidth(), 0, aNewSize.getWidth(), aNewSize.getHeight());
// New area extended to the bottom of the sheet after last row
// excluding overlapping area with aNewColArea
tools::Rectangle aNewRowArea(0, aOldSize.getHeight(), aOldSize.getWidth(), aNewSize.getHeight());
// Only invalidate if spreadsheet extended to the right
if (aNewColArea.getOpenWidth())
{
SfxLokHelper::notifyInvalidation(aViewData.GetViewShell(), &aNewColArea);
}
// Only invalidate if spreadsheet extended to the bottom
if (aNewRowArea.getOpenHeight())
{
SfxLokHelper::notifyInvalidation(aViewData.GetViewShell(), &aNewRowArea);
}
// Provide size in the payload, so clients don't have to
// call lok::Document::getDocumentSize().
std::stringstream ss;
ss << aNewSize.Width() << ", " << aNewSize.Height();
OString sSize( ss.str() );
ScModelObj* pModel = comphelper::getFromUnoTunnel<ScModelObj>(aViewData.GetViewShell()->GetCurrentDocument());
SfxLokHelper::notifyDocumentSizeChanged(aViewData.GetViewShell(), sSize, pModel, false);
}
static bool lcl_IsRefDlgActive(SfxViewFrame& rViewFrm)
{
ScModule* pScMod = ScModule::get();
if (!pScMod->IsRefDialogOpen())
return false;
auto nDlgId = pScMod->GetCurRefDlgId();
if (!rViewFrm.HasChildWindow(nDlgId))
return false;
SfxChildWindow* pChild = rViewFrm.GetChildWindow(nDlgId);
if (!pChild)
return false;
auto xDlgController = pChild->GetController();
if (!xDlgController || !xDlgController->getDialog()->get_visible())
return false;
IAnyRefDialog* pRefDlg = dynamic_cast<IAnyRefDialog*>(xDlgController.get());
return pRefDlg && pRefDlg->IsRefInputMode();
}
void ScTabView::CheckSelectionTransfer()
{
if ( !aViewData.IsActive() ) // only for active view
return;
ScModule* pScMod = ScModule::get();
ScSelectionTransferObj* pOld = pScMod->GetSelectionTransfer();
rtl::Reference<ScSelectionTransferObj> pNew = ScSelectionTransferObj::CreateFromView( this );
if ( !pNew )
return;
// create new selection
if (pOld)
pOld->ForgetView();
pScMod->SetSelectionTransfer( pNew.get() );
// tdf#124975/tdf#136242 changing the calc selection can trigger removal of the
// selection of an open RefDlg dialog, so don't inform the
// desktop clipboard of the changed selection if that dialog is open
if (!lcl_IsRefDlgActive(aViewData.GetViewShell()->GetViewFrame()))
pNew->CopyToPrimarySelection(); // may delete pOld
// Log the selection change
ScMarkData& rMark = aViewData.GetMarkData();
if (rMark.IsMarked())
{
const ScRange& aMarkRange = rMark.GetMarkArea();
OUString aStartAddress = aMarkRange.aStart.GetColRowString();
OUString aEndAddress = aMarkRange.aEnd.GetColRowString();
collectUIInformation({{"RANGE", aStartAddress + ":" + aEndAddress}});
}
}
// update input row / menus
// CursorPosChanged calls SelectionChanged
// SelectionChanged calls CellContentChanged
void ScTabView::CellContentChanged()
{
SfxBindings& rBindings = aViewData.GetBindings();
rBindings.Invalidate( SID_ATTR_SIZE ); // -> show error message
rBindings.Invalidate( SID_THESAURUS );
rBindings.Invalidate( SID_HYPERLINK_GETLINK );
rBindings.Invalidate( SID_ROWCOL_SELCOUNT );
InvalidateAttribs(); // attributes updates
aViewData.GetViewShell()->UpdateInputHandler();
}
void ScTabView::SetTabProtectionSymbol( SCTAB nTab, const bool bProtect )
{
pTabControl->SetProtectionSymbol( static_cast<sal_uInt16>(nTab)+1, bProtect);
}
void ScTabView::SelectionChanged(bool bFromPaste)
{
SfxViewFrame& rViewFrame = aViewData.GetViewShell()->GetViewFrame();
uno::Reference<frame::XController> xController = rViewFrame.GetFrame().GetController();
if (xController.is())
{
ScTabViewObj* pImp = dynamic_cast<ScTabViewObj*>( xController.get() );
if (pImp)
pImp->SelectionChanged();
}
UpdateAutoFillMark(bFromPaste); // also calls CheckSelectionTransfer
SfxBindings& rBindings = aViewData.GetBindings();
rBindings.Invalidate( SID_CURRENTCELL ); // -> Navigator
rBindings.Invalidate( SID_AUTO_FILTER ); // -> Menu
rBindings.Invalidate( FID_NOTE_VISIBLE );
rBindings.Invalidate( FID_SHOW_NOTE );
rBindings.Invalidate( FID_HIDE_NOTE );
rBindings.Invalidate( FID_SHOW_ALL_NOTES );
rBindings.Invalidate( FID_HIDE_ALL_NOTES );
rBindings.Invalidate( SID_TOGGLE_NOTES );
rBindings.Invalidate( SID_DELETE_NOTE );
rBindings.Invalidate( SID_ROWCOL_SELCOUNT );
// functions than may need to be disabled
rBindings.Invalidate( FID_INS_ROWBRK );
rBindings.Invalidate( FID_INS_COLBRK );
rBindings.Invalidate( FID_DEL_ROWBRK );
rBindings.Invalidate( FID_DEL_COLBRK );
rBindings.Invalidate( FID_MERGE_ON );
rBindings.Invalidate( FID_MERGE_OFF );
rBindings.Invalidate( FID_MERGE_TOGGLE );
rBindings.Invalidate( SID_AUTOFILTER_HIDE );
rBindings.Invalidate( SID_UNFILTER );
rBindings.Invalidate( SID_REIMPORT_DATA );
rBindings.Invalidate( SID_REFRESH_DBAREA );
rBindings.Invalidate( SID_OUTLINE_SHOW );
rBindings.Invalidate( SID_OUTLINE_HIDE );
rBindings.Invalidate( SID_OUTLINE_REMOVE );
rBindings.Invalidate( FID_FILL_TO_BOTTOM );
rBindings.Invalidate( FID_FILL_TO_RIGHT );
rBindings.Invalidate( FID_FILL_TO_TOP );
rBindings.Invalidate( FID_FILL_TO_LEFT );
rBindings.Invalidate( FID_FILL_SERIES );
rBindings.Invalidate( SID_SCENARIOS );
rBindings.Invalidate( SID_AUTOFORMAT );
rBindings.Invalidate( SID_OPENDLG_TABOP );
rBindings.Invalidate( SID_DATA_SELECT );
rBindings.Invalidate( SID_CUT );
rBindings.Invalidate( SID_COPY );
rBindings.Invalidate( SID_PASTE );
rBindings.Invalidate( SID_PASTE_SPECIAL );
rBindings.Invalidate( SID_PASTE_UNFORMATTED );
rBindings.Invalidate( SID_COPYDELETE );
rBindings.Invalidate( FID_INS_ROW );
rBindings.Invalidate( FID_INS_COLUMN );
rBindings.Invalidate( FID_INS_ROWS_BEFORE );
rBindings.Invalidate( FID_INS_COLUMNS_BEFORE );
rBindings.Invalidate( FID_INS_ROWS_AFTER );
rBindings.Invalidate( FID_INS_COLUMNS_AFTER );
rBindings.Invalidate( FID_INS_CELL );
rBindings.Invalidate( FID_INS_CELLSDOWN );
rBindings.Invalidate( FID_INS_CELLSRIGHT );
rBindings.Invalidate( FID_CHG_COMMENT );
// only due to protect cell:
rBindings.Invalidate( SID_CELL_FORMAT_RESET );
rBindings.Invalidate( SID_DELETE );
rBindings.Invalidate( SID_DELETE_CONTENTS );
rBindings.Invalidate( FID_DELETE_CELL );
rBindings.Invalidate( FID_CELL_FORMAT );
rBindings.Invalidate( SID_ENABLE_HYPHENATION );
rBindings.Invalidate( SID_INSERT_POSTIT );
rBindings.Invalidate( SID_CHARMAP );
rBindings.Invalidate( SID_OPENDLG_FUNCTION );
rBindings.Invalidate( FID_VALIDATION );
rBindings.Invalidate( SID_EXTERNAL_SOURCE );
rBindings.Invalidate( SID_TEXT_TO_COLUMNS );
rBindings.Invalidate( SID_SORT_ASCENDING );
rBindings.Invalidate( SID_SORT_DESCENDING );
rBindings.Invalidate( SID_SELECT_UNPROTECTED_CELLS );
rBindings.Invalidate( SID_CLEAR_AUTO_FILTER );
if (!comphelper::LibreOfficeKit::isActive())
rBindings.Invalidate( SID_LANGUAGE_STATUS );
if (aViewData.GetViewShell()->HasAccessibilityObjects())
aViewData.GetViewShell()->BroadcastAccessibility(SfxHint(SfxHintId::ScAccCursorChanged));
CellContentChanged();
}
void ScTabView::CursorPosChanged()
{
bool bRefMode = ScModule::get()->IsFormulaMode();
if ( !bRefMode ) // check that RefMode works when switching sheets
aViewData.GetDocShell()->Broadcast( SfxHint( SfxHintId::ScKillEditView ) );
// Broadcast, so that other Views of the document also switch
ScDocument& rDocument = aViewData.GetDocument();
bool bDataPilot = rDocument.HasDataPilotAtPosition(aViewData.GetCurPos());
aViewData.GetViewShell()->SetPivotShell(bDataPilot);
if (!bDataPilot)
{
bool bSparkline = rDocument.HasSparkline(aViewData.GetCurPos());
aViewData.GetViewShell()->SetSparklineShell(bSparkline);
}
// UpdateInputHandler now in CellContentChanged
SelectionChanged();
aViewData.SetTabStartCol( SC_TABSTART_NONE );
}
namespace {
Point calcHintWindowPosition(
const Point& rCellPos, const Size& rCellSize, const Size& rFrameWndSize, const Size& rHintWndSize)
{
const tools::Long nMargin = 20;
tools::Long nMLeft = rCellPos.X();
tools::Long nMRight = rFrameWndSize.Width() - rCellPos.X() - rCellSize.Width();
tools::Long nMTop = rCellPos.Y();
tools::Long nMBottom = rFrameWndSize.Height() - rCellPos.Y() - rCellSize.Height();
// First, see if we can fit the entire hint window in the visible region.
if (nMRight - nMargin >= rHintWndSize.Width())
{
// Right margin is wide enough.
if (rFrameWndSize.Height() >= rHintWndSize.Height())
{
// The frame has enough height. Take it.
Point aPos = rCellPos;
aPos.AdjustX(rCellSize.Width() + nMargin );
if (aPos.Y() + rHintWndSize.Height() > rFrameWndSize.Height())
{
// Push the hint window up a bit to make it fit.
aPos.setY( rFrameWndSize.Height() - rHintWndSize.Height() );
}
return aPos;
}
}
if (nMBottom - nMargin >= rHintWndSize.Height())
{
// Bottom margin is high enough.
if (rFrameWndSize.Width() >= rHintWndSize.Width())
{
// The frame has enough width. Take it.
Point aPos = rCellPos;
aPos.AdjustY(rCellSize.Height() + nMargin );
if (aPos.X() + rHintWndSize.Width() > rFrameWndSize.Width())
{
// Move the hint window to the left to make it fit.
aPos.setX( rFrameWndSize.Width() - rHintWndSize.Width() );
}
return aPos;
}
}
if (nMLeft - nMargin >= rHintWndSize.Width())
{
// Left margin is wide enough.
if (rFrameWndSize.Height() >= rHintWndSize.Height())
{
// The frame is high enough. Take it.
Point aPos = rCellPos;
aPos.AdjustX( -(rHintWndSize.Width() + nMargin) );
if (aPos.Y() + rHintWndSize.Height() > rFrameWndSize.Height())
{
// Push the hint window up a bit to make it fit.
aPos.setY( rFrameWndSize.Height() - rHintWndSize.Height() );
}
return aPos;
}
}
if (nMTop - nMargin >= rHintWndSize.Height())
{
// Top margin is high enough.
if (rFrameWndSize.Width() >= rHintWndSize.Width())
{
// The frame is wide enough. Take it.
Point aPos = rCellPos;
aPos.AdjustY( -(rHintWndSize.Height() + nMargin) );
if (aPos.X() + rHintWndSize.Width() > rFrameWndSize.Width())
{
// Move the hint window to the left to make it fit.
aPos.setX( rFrameWndSize.Width() - rHintWndSize.Width() );
}
return aPos;
}
}
// The popup doesn't fit in any direction in its entirety. Do our best.
if (nMRight - nMargin >= rHintWndSize.Width())
{
// Right margin is good enough.
Point aPos = rCellPos;
aPos.AdjustX(nMargin + rCellSize.Width() );
aPos.setY( 0 );
return aPos;
}
if (nMBottom - nMargin >= rHintWndSize.Height())
{
// Bottom margin is good enough.
Point aPos = rCellPos;
aPos.AdjustY(nMargin + rCellSize.Height() );
aPos.setX( 0 );
return aPos;
}
if (nMLeft - nMargin >= rHintWndSize.Width())
{
// Left margin is good enough.
Point aPos = rCellPos;
aPos.AdjustX( -(rHintWndSize.Width() + nMargin) );
aPos.setY( 0 );
return aPos;
}
if (nMTop - nMargin >= rHintWndSize.Height())
{
// Top margin is good enough.
Point aPos = rCellPos;
aPos.AdjustY( -(rHintWndSize.Height() + nMargin) );
aPos.setX( 0 );
return aPos;
}
// None of the above. Hopeless. At least try not to cover the current
// cell.
Point aPos = rCellPos;
aPos.AdjustX(rCellSize.Width() );
return aPos;
}
}
void ScTabView::TestHintWindow()
{
// show input help window and list drop-down button for validity
mxInputHintOO.reset();
bool bListValButton = false;
ScAddress aListValPos;
ScDocument& rDoc = aViewData.GetDocument();
const SfxUInt32Item& rItem = rDoc.GetAttr( aViewData.GetCurX(),
aViewData.GetCurY(),
aViewData.CurrentTabForData(),
ATTR_VALIDDATA );
if ( rItem.GetValue() )
{
const ScValidationData* pData = rDoc.GetValidationEntry( rItem.GetValue() );
OSL_ENSURE(pData,"ValidationData not found");
OUString aTitle, aMessage;
if ( pData && pData->GetInput( aTitle, aMessage ) && !aMessage.isEmpty() )
{
ScSplitPos eWhich = aViewData.GetActivePart();
ScGridWindow* pWin = pGridWin[eWhich].get();
SCCOL nCol = aViewData.GetCurX();
SCROW nRow = aViewData.GetCurY();
Point aPos = aViewData.GetScrPos( nCol, nRow, eWhich );
Size aWinSize = pWin->GetOutputSizePixel();
// cursor visible?
if ( nCol >= aViewData.GetPosX(WhichH(eWhich)) &&
nRow >= aViewData.GetPosY(WhichV(eWhich)) &&
aPos.X() < aWinSize.Width() && aPos.Y() < aWinSize.Height() )
{
const svtools::ColorConfig& rColorCfg = ScModule::get()->GetColorConfig();
// tdf#156398 use same color combination as used in XclDefaultPalette
Color aCommentText = rColorCfg.GetColorValue(svtools::FONTCOLOR).nColor;
Color aCommentBack = rColorCfg.GetColorValue(svtools::CALCNOTESBACKGROUND).nColor;
// create HintWindow, determines its size by itself
ScOverlayHint* pOverlay = new ScOverlayHint(aTitle, aMessage,
aCommentBack, aCommentText,
pFrameWin->GetFont());
mxInputHintOO.reset(new sdr::overlay::OverlayObjectList);
mxInputHintOO->append(std::unique_ptr<sdr::overlay::OverlayObject>(pOverlay));
Size aHintWndSize = pOverlay->GetSizePixel();
tools::Long nCellSizeX = 0;
tools::Long nCellSizeY = 0;
aViewData.GetMergeSizePixel(nCol, nRow, nCellSizeX, nCellSizeY);
Point aHintPos = calcHintWindowPosition(
aPos, Size(nCellSizeX,nCellSizeY), aWinSize, aHintWndSize);
pOverlay->SetPos(pWin->PixelToLogic(aHintPos, pWin->GetDrawMapMode()), pWin->GetDrawMapMode());
for (VclPtr<ScGridWindow> & pWindow : pGridWin)
{
if (!pWindow)
continue;
if (!pWindow->IsVisible())
continue;
rtl::Reference<sdr::overlay::OverlayManager> xOverlayManager = pWindow->getOverlayManager();
if (!xOverlayManager.is())
continue;
if (pWindow == pWin)
{
xOverlayManager->add(*pOverlay);
pWindow->updateLOKInputHelp(aTitle, aMessage);
}
else
{
//tdf#92530 if the help tip doesn't fit into its allocated area in a split window
//scenario, then because here we place it into the other split windows as well the
//missing portions will be displayed in the other split windows to form an apparent
//single tip, albeit "under" the split lines
Point aOtherPos(pWindow->ScreenToOutputPixel(pWin->OutputToScreenPixel(aHintPos)));
std::unique_ptr<ScOverlayHint> pOtherOverlay(new ScOverlayHint(aTitle, aMessage,
aCommentBack,
aCommentText,
pFrameWin->GetFont()));
Point aFooPos(pWindow->PixelToLogic(aOtherPos, pWindow->GetDrawMapMode()));
pOtherOverlay->SetPos(aFooPos, pWindow->GetDrawMapMode());
xOverlayManager->add(*pOtherOverlay);
mxInputHintOO->append(std::move(pOtherOverlay));
}
}
}
}
// list drop-down button
if ( pData && pData->HasSelectionList() )
{
aListValPos.Set( aViewData.GetCurX(), aViewData.GetCurY(), aViewData.CurrentTabForData() );
bListValButton = true;
}
}
for (VclPtr<ScGridWindow> const & pWin : pGridWin)
{
if (pWin && pWin->IsVisible())
pWin->UpdateListValPos(bListValButton, aListValPos);
}
}
bool ScTabView::HasHintWindow() const { return mxInputHintOO != nullptr; }
void ScTabView::RemoveHintWindow()
{
mxInputHintOO.reset();
}
// find window that should not be over the cursor
static weld::Window* lcl_GetCareWin(SfxViewFrame& rViewFrm)
{
//! also spelling ??? (then set the member variables when calling)
// search & replace
if (rViewFrm.HasChildWindow(SID_SEARCH_DLG))
{
SfxChildWindow* pChild = rViewFrm.GetChildWindow(SID_SEARCH_DLG);
if (pChild)
{
auto xDlgController = pChild->GetController();
if (xDlgController && xDlgController->getDialog()->get_visible())
return xDlgController->getDialog();
}
}
// apply changes
if ( rViewFrm.HasChildWindow(FID_CHG_ACCEPT) )
{
SfxChildWindow* pChild = rViewFrm.GetChildWindow(FID_CHG_ACCEPT);
if (pChild)
{
auto xDlgController = pChild->GetController();
if (xDlgController && xDlgController->getDialog()->get_visible())
return xDlgController->getDialog();
}
}
return nullptr;
}
// adjust screen with respect to cursor position
void ScTabView::AlignToCursor( SCCOL nCurX, SCROW nCurY, ScFollowMode eMode,
const ScSplitPos* pWhich )
{
// now switch active part here
ScSplitPos eActive = aViewData.GetActivePart();
ScHSplitPos eActiveX = WhichH(eActive);
ScVSplitPos eActiveY = WhichV(eActive);
bool bHFix = (aViewData.GetHSplitMode() == SC_SPLIT_FIX);
bool bVFix = (aViewData.GetVSplitMode() == SC_SPLIT_FIX);
if (bHFix && eActiveX == SC_SPLIT_LEFT && nCurX >= aViewData.GetFixPosX())
{
ActivatePart( (eActiveY==SC_SPLIT_TOP) ? SC_SPLIT_TOPRIGHT : SC_SPLIT_BOTTOMRIGHT );
eActiveX = SC_SPLIT_RIGHT;
}
if (bVFix && eActiveY == SC_SPLIT_TOP && nCurY >= aViewData.GetFixPosY())
{
ActivatePart( (eActiveX==SC_SPLIT_LEFT) ? SC_SPLIT_BOTTOMLEFT : SC_SPLIT_BOTTOMRIGHT );
eActiveY = SC_SPLIT_BOTTOM;
}
// actual align
if ( eMode != SC_FOLLOW_NONE )
{
ScSplitPos eAlign;
if (pWhich)
eAlign = *pWhich;
else
eAlign = aViewData.GetActivePart();
ScHSplitPos eAlignX = WhichH(eAlign);
ScVSplitPos eAlignY = WhichV(eAlign);
SCCOL nDeltaX = aViewData.GetPosX(eAlignX);
SCROW nDeltaY = aViewData.GetPosY(eAlignY);
SCCOL nSizeX = aViewData.VisibleCellsX(eAlignX);
SCROW nSizeY = aViewData.VisibleCellsY(eAlignY);
tools::Long nCellSizeX;
tools::Long nCellSizeY;
if ( nCurX >= 0 && nCurY >= 0 )
aViewData.GetMergeSizePixel( nCurX, nCurY, nCellSizeX, nCellSizeY );
else
nCellSizeX = nCellSizeY = 0;
Size aScrSize = aViewData.GetScrSize();
tools::Long nDenom;
if ( eMode == SC_FOLLOW_JUMP_END && nCurX > aViewData.GetRefStartX()
&& nCurY > aViewData.GetRefStartY() )
nDenom = 1; // tdf#154271 Selected cell will be at the bottom corner
// to maximize the visible/usable area
else
nDenom = 2; // Selected cell will be at the center of the screen, so that
// it will be visible. This is useful for search results, etc.
tools::Long nSpaceX = ( aScrSize.Width() - nCellSizeX ) / nDenom;
tools::Long nSpaceY = ( aScrSize.Height() - nCellSizeY ) / nDenom;
// nSpaceY: desired start position of cell for FOLLOW_JUMP, modified if dialog interferes
bool bForceNew = false; // force new calculation of JUMP position (vertical only)
// VisibleCellsY == CellsAtY( GetPosY( eWhichY ), 1, eWhichY )
// when for instance a search dialog is open, don't put the cursor behind the dialog
// if possible, put the row with the cursor above or below the dialog
//! not if already completely visible
if ( eMode == SC_FOLLOW_JUMP || eMode == SC_FOLLOW_JUMP_END )
{
weld::Window* pCare = lcl_GetCareWin( aViewData.GetViewShell()->GetViewFrame() );
if (pCare)
{
bool bLimit = false;
tools::Rectangle aDlgPixel;
Size aWinSize;
vcl::Window* pWin = GetActiveWin();
weld::Window* pFrame = pWin ? pWin->GetFrameWeld() : nullptr;
int x, y, width, height;
if (pFrame && pCare->get_extents_relative_to(*pFrame, x, y, width, height))
{
aDlgPixel = tools::Rectangle(Point(x, y), Size(width, height));
aWinSize = pWin->GetOutputSizePixel();
// dos the dialog cover the GridWin?
if ( aDlgPixel.Right() >= 0 && aDlgPixel.Left() < aWinSize.Width() )
{
if ( nCurX < nDeltaX || nCurX >= nDeltaX+nSizeX ||
nCurY < nDeltaY || nCurY >= nDeltaY+nSizeY )
bLimit = true; // scroll anyway
else
{
// cursor is on the screen
Point aStart = aViewData.GetScrPos( nCurX, nCurY, eAlign );
tools::Long nCSX, nCSY;
aViewData.GetMergeSizePixel( nCurX, nCurY, nCSX, nCSY );
tools::Rectangle aCursor( aStart, Size( nCSX, nCSY ) );
if ( aCursor.Overlaps( aDlgPixel ) )
bLimit = true; // cell is covered by the dialog
}
}
}
if (bLimit)
{
bool bBottom = false;
tools::Long nTopSpace = aDlgPixel.Top();
tools::Long nBotSpace = aWinSize.Height() - aDlgPixel.Bottom();
if ( nBotSpace > 0 && nBotSpace > nTopSpace )
{
tools::Long nDlgBot = aDlgPixel.Bottom();
SCCOL nWPosX;
SCROW nWPosY;
aViewData.GetPosFromPixel( 0,nDlgBot, eAlign, nWPosX, nWPosY );
++nWPosY; // below the last affected cell
SCROW nDiff = nWPosY - nDeltaY;
if ( nCurY >= nDiff ) // position can not be negative
{
nSpaceY = nDlgBot + ( nBotSpace - nCellSizeY ) / 2;
bBottom = true;
bForceNew = true;
}
}
if ( !bBottom && nTopSpace > 0 )
{
nSpaceY = ( nTopSpace - nCellSizeY ) / 2;
bForceNew = true;
}
}
}
}
SCCOL nNewDeltaX = nDeltaX;
SCROW nNewDeltaY = nDeltaY;
bool bDoLine = false;
switch (eMode)
{
case SC_FOLLOW_JUMP:
case SC_FOLLOW_JUMP_END:
if ( nCurX < nDeltaX || nCurX >= nDeltaX+nSizeX )
{
nNewDeltaX = nCurX - aViewData.CellsAtX( nCurX, -1, eAlignX, nSpaceX );
if (nNewDeltaX < 0)
nNewDeltaX = 0;
nSizeX = aViewData.CellsAtX( nNewDeltaX, 1, eAlignX );
}
if ( nCurY < nDeltaY || nCurY >= nDeltaY+nSizeY || bForceNew )
{
nNewDeltaY = nCurY - aViewData.CellsAtY( nCurY, -1, eAlignY, nSpaceY );
if (nNewDeltaY < 0)
nNewDeltaY = 0;
nSizeY = aViewData.CellsAtY( nNewDeltaY, 1, eAlignY );
}
bDoLine = true;
break;
case SC_FOLLOW_LINE:
bDoLine = true;
break;
case SC_FOLLOW_FIX:
if ( nCurX < nDeltaX || nCurX >= nDeltaX+nSizeX )
{
nNewDeltaX = nDeltaX + nCurX - aViewData.GetCurX();
if (nNewDeltaX < 0)
nNewDeltaX = 0;
nSizeX = aViewData.CellsAtX( nNewDeltaX, 1, eAlignX );
}
if ( nCurY < nDeltaY || nCurY >= nDeltaY+nSizeY )
{
nNewDeltaY = nDeltaY + nCurY - aViewData.GetCurY();
if (nNewDeltaY < 0)
nNewDeltaY = 0;
nSizeY = aViewData.CellsAtY( nNewDeltaY, 1, eAlignY );
}
// like old version of SC_FOLLOW_JUMP:
if ( nCurX < nNewDeltaX || nCurX >= nNewDeltaX+nSizeX )
{
nNewDeltaX = nCurX - (nSizeX / 2);
if (nNewDeltaX < 0)
nNewDeltaX = 0;
nSizeX = aViewData.CellsAtX( nNewDeltaX, 1, eAlignX );
}
if ( nCurY < nNewDeltaY || nCurY >= nNewDeltaY+nSizeY )
{
nNewDeltaY = nCurY - (nSizeY / 2);
if (nNewDeltaY < 0)
nNewDeltaY = 0;
nSizeY = aViewData.CellsAtY( nNewDeltaY, 1, eAlignY );
}
bDoLine = true;
break;
case SC_FOLLOW_NONE:
break;
default:
OSL_FAIL("Wrong cursor mode");
break;
}
ScDocument& rDoc = aViewData.GetDocument();
if (bDoLine)
{
while ( nCurX >= nNewDeltaX+nSizeX )
{
nNewDeltaX = nCurX-nSizeX+1;
SCTAB nTab = aViewData.CurrentTabForData();
while ( nNewDeltaX < rDoc.MaxCol() && !rDoc.GetColWidth( nNewDeltaX, nTab ) )
++nNewDeltaX;
nSizeX = aViewData.CellsAtX( nNewDeltaX, 1, eAlignX );
}
while ( nCurY >= nNewDeltaY+nSizeY )
{
nNewDeltaY = nCurY-nSizeY+1;
SCTAB nTab = aViewData.CurrentTabForData();
while ( nNewDeltaY < rDoc.MaxRow() && !rDoc.GetRowHeight( nNewDeltaY, nTab ) )
++nNewDeltaY;
nSizeY = aViewData.CellsAtY( nNewDeltaY, 1, eAlignY );
}
if ( nCurX < nNewDeltaX )
nNewDeltaX = nCurX;
if ( nCurY < nNewDeltaY )
nNewDeltaY = nCurY;
}
if ( nNewDeltaX != nDeltaX )
nSizeX = aViewData.CellsAtX( nNewDeltaX, 1, eAlignX );
if (nNewDeltaX+nSizeX-1 > rDoc.MaxCol())
nNewDeltaX = rDoc.MaxCol()-nSizeX+1;
if (nNewDeltaX < 0)
nNewDeltaX = 0;
if ( nNewDeltaY != nDeltaY )
nSizeY = aViewData.CellsAtY( nNewDeltaY, 1, eAlignY );
if (nNewDeltaY+nSizeY-1 > rDoc.MaxRow())
nNewDeltaY = rDoc.MaxRow()-nSizeY+1;
if (nNewDeltaY < 0)
nNewDeltaY = 0;
if ( nNewDeltaX != nDeltaX )
ScrollX( nNewDeltaX - nDeltaX, eAlignX );
if ( nNewDeltaY != nDeltaY )
ScrollY( nNewDeltaY - nDeltaY, eAlignY );
}
// switch active part again
if (bHFix)
if (eActiveX == SC_SPLIT_RIGHT && nCurX < aViewData.GetFixPosX())
{
ActivatePart( (eActiveY==SC_SPLIT_TOP) ? SC_SPLIT_TOPLEFT : SC_SPLIT_BOTTOMLEFT );
eActiveX = SC_SPLIT_LEFT;
}
if (bVFix)
if (eActiveY == SC_SPLIT_BOTTOM && nCurY < aViewData.GetFixPosY())
{
ActivatePart( (eActiveX==SC_SPLIT_LEFT) ? SC_SPLIT_TOPLEFT : SC_SPLIT_TOPRIGHT );
}
}
bool ScTabView::SelMouseButtonDown( const MouseEvent& rMEvt )
{
bool bRet = false;
// #i3875# *Hack*
bool bMod1Locked = (aViewData.GetViewShell()->GetLockedModifiers() & KEY_MOD1) != 0;
aViewData.SetSelCtrlMouseClick( rMEvt.IsMod1() || bMod1Locked );
if ( pSelEngine )
{
bMoveIsShift = rMEvt.IsShift();
bRet = pSelEngine->SelMouseButtonDown( rMEvt );
bMoveIsShift = false;
}
aViewData.SetSelCtrlMouseClick( false ); // #i3875# *Hack*
return bRet;
}
// MoveCursor - with adjustment of the view section
void ScTabView::MoveCursorAbs( SCCOL nCurX, SCROW nCurY, ScFollowMode eMode,
bool bShift, bool bControl, bool bKeepOld, bool bKeepSel )
{
if (!bKeepOld)
aViewData.ResetOldCursor();
ScDocument& rDoc = aViewData.GetDocument();
// #i123629#
if( aViewData.GetViewShell()->GetForceFocusOnCurCell() )
aViewData.GetViewShell()->SetForceFocusOnCurCell( !rDoc.ValidColRow(nCurX, nCurY) );
if (nCurX < 0) nCurX = 0;
if (nCurY < 0) nCurY = 0;
if (nCurX > rDoc.MaxCol()) nCurX = rDoc.MaxCol();
if (nCurY > rDoc.MaxRow()) nCurY = rDoc.MaxRow();
// FIXME: this is to limit the number of rows handled in the Online
// to 1000; this will be removed again when the performance
// bottlenecks are sorted out
if (comphelper::LibreOfficeKit::isActive())
nCurY = std::min(nCurY, MAXTILEDROW);
HideAllCursors();
// switch of active now in AlignToCursor
AlignToCursor( nCurX, nCurY, eMode );
if (bKeepSel)
{
SetCursor( nCurX, nCurY ); // keep selection
// If the cursor is in existing selection, it's a cursor movement by
// ENTER or TAB. If not, then it's a new selection during ADD
// selection mode.
const ScMarkData& rMark = aViewData.GetMarkData();
ScRangeList aSelList;
rMark.FillRangeListWithMarks(&aSelList, false);
if (!aSelList.Contains(ScRange(nCurX, nCurY, aViewData.CurrentTabForData())))
// Cursor not in existing selection. Start a new selection.
DoneBlockMode(true);
}
else
{
if (!bShift)
{
// Remove all marked data on cursor movement unless the Shift is
// locked or while editing a formula. It is cheaper to check for
// marks first and then formula mode.
ScMarkData& rMark = aViewData.GetMarkData();
bool bMarked = rMark.IsMarked() || rMark.IsMultiMarked();
if (bMarked && !ScModule::get()->IsFormulaMode())
{
rMark.ResetMark();
DoneBlockMode();
InitOwnBlockMode( ScRange( nCurX, nCurY, aViewData.CurrentTabForData()));
MarkDataChanged();
}
}
bool bSame = ( nCurX == aViewData.GetCurX() && nCurY == aViewData.GetCurY() );
bMoveIsShift = bShift;
pSelEngine->CursorPosChanging( bShift, bControl );
bMoveIsShift = false;
aFunctionSet.SetCursorAtCell( nCurX, nCurY, false );
// If the cursor has not been moved, the SelectionChanged for canceling the
// selection has to happen here individually:
if (bSame)
SelectionChanged();
}
ShowAllCursors();
TestHintWindow();
}
void ScTabView::MoveCursorRel( SCCOL nMovX, SCROW nMovY, ScFollowMode eMode,
bool bShift, bool bKeepSel )
{
ScDocument& rDoc = aViewData.GetDocument();
SCTAB nTab = aViewData.CurrentTabForData();
bool bSkipProtected = false, bSkipUnprotected = false;
const ScTableProtection* pProtect = rDoc.GetTabProtection(nTab);
if ( pProtect && pProtect->isProtected() )
{
bSkipProtected = !pProtect->isOptionEnabled(ScTableProtection::SELECT_LOCKED_CELLS);
bSkipUnprotected = !pProtect->isOptionEnabled(ScTableProtection::SELECT_UNLOCKED_CELLS);
}
if ( bSkipProtected && bSkipUnprotected )
return;
SCCOL nOldX;
SCROW nOldY;
SCCOL nCurX;
SCROW nCurY;
if ( aViewData.IsRefMode() )
{
nOldX = aViewData.GetRefEndX();
nOldY = aViewData.GetRefEndY();
nCurX = nOldX + nMovX;
nCurY = nOldY + nMovY;
}
else
{
nOldX = aViewData.GetCurX();
nOldY = aViewData.GetCurY();
nCurX = (nMovX != 0) ? nOldX+nMovX : aViewData.GetOldCurX();
nCurY = (nMovY != 0) ? nOldY+nMovY : aViewData.GetOldCurY();
}
if (nMovX < 0 && nOldX == 0)
{ // trying to go left from 1st column
if (nMovY == 0) // done, because no vertical move is requested
return;
}
if (nMovY < 0 && nOldY == 0)
{ // trying to go up from 1st row
if (nMovX == 0) // done, because no horizontal move is requested
return;
}
aViewData.ResetOldCursor();
if (nMovX != 0 && rDoc.ValidColRow(nCurX,nCurY))
SkipCursorHorizontal(nCurX, nCurY, nOldX, nMovX);
if (nMovY != 0 && rDoc.ValidColRow(nCurX,nCurY))
SkipCursorVertical(nCurX, nCurY, nOldY, nMovY);
MoveCursorAbs( nCurX, nCurY, eMode, bShift, false, true, bKeepSel );
}
void ScTabView::MoveCursorPage( SCCOL nMovX, SCROW nMovY, ScFollowMode eMode, bool bShift, bool bKeepSel )
{
SCCOL nPageX;
SCROW nPageY;
GetPageMoveEndPosition(nMovX, nMovY, nPageX, nPageY);
MoveCursorRel( nPageX, nPageY, eMode, bShift, bKeepSel );
}
void ScTabView::MoveCursorArea( SCCOL nMovX, SCROW nMovY, ScFollowMode eMode, bool bShift, bool bKeepSel, bool bInteractiveByUser )
{
SCCOL nNewX;
SCROW nNewY;
GetAreaMoveEndPosition(nMovX, nMovY, eMode, nNewX, nNewY, eMode, bInteractiveByUser);
MoveCursorRel(nNewX, nNewY, eMode, bShift, bKeepSel);
}
void ScTabView::MoveCursorEnd( SCCOL nMovX, SCROW nMovY, ScFollowMode eMode, bool bShift, bool bKeepSel )
{
ScDocument& rDoc = aViewData.GetDocument();
SCTAB nTab = aViewData.CurrentTabForData();
SCCOL nCurX;
SCROW nCurY;
aViewData.GetMoveCursor( nCurX,nCurY );
SCCOL nNewX = nCurX;
SCROW nNewY = nCurY;
SCCOL nUsedX = 0;
SCROW nUsedY = 0;
if ( nMovX > 0 || nMovY > 0 )
rDoc.GetPrintArea( nTab, nUsedX, nUsedY ); // get end
if (nMovX<0)
nNewX=0;
else if (nMovX>0)
nNewX=nUsedX; // last used range
if (nMovY<0)
nNewY=0;
else if (nMovY>0)
nNewY=nUsedY;
aViewData.ResetOldCursor();
MoveCursorRel( nNewX-nCurX, nNewY-nCurY, eMode, bShift, bKeepSel );
}
void ScTabView::MoveCursorScreen( SCCOL nMovX, SCROW nMovY, ScFollowMode eMode, bool bShift )
{
ScDocument& rDoc = aViewData.GetDocument();
SCTAB nTab = aViewData.CurrentTabForData();
SCCOL nCurX;
SCROW nCurY;
aViewData.GetMoveCursor( nCurX,nCurY );
SCCOL nNewX = nCurX;
SCROW nNewY = nCurY;
ScSplitPos eWhich = aViewData.GetActivePart();
SCCOL nPosX = aViewData.GetPosX( WhichH(eWhich) );
SCROW nPosY = aViewData.GetPosY( WhichV(eWhich) );
SCCOL nAddX = aViewData.VisibleCellsX( WhichH(eWhich) );
if (nAddX != 0)
--nAddX;
SCROW nAddY = aViewData.VisibleCellsY( WhichV(eWhich) );
if (nAddY != 0)
--nAddY;
if (nMovX<0)
nNewX=nPosX;
else if (nMovX>0)
nNewX=nPosX+nAddX;
if (nMovY<0)
nNewY=nPosY;
else if (nMovY>0)
nNewY=nPosY+nAddY;
aViewData.SetOldCursor( nNewX,nNewY );
rDoc.SkipOverlapped(nNewX, nNewY, nTab);
MoveCursorAbs( nNewX, nNewY, eMode, bShift, false, true );
}
void ScTabView::MoveCursorEnter( bool bShift ) // bShift -> up/down
{
const ScInputOptions& rOpt = ScModule::get()->GetInputOptions();
if (!rOpt.GetMoveSelection())
{
aViewData.UpdateInputHandler(true);
return;
}
SCCOL nMoveX = 0;
SCROW nMoveY = 0;
switch (static_cast<ScDirection>(rOpt.GetMoveDir()))
{
case DIR_BOTTOM:
nMoveY = bShift ? -1 : 1;
break;
case DIR_RIGHT:
nMoveX = bShift ? -1 : 1;
break;
case DIR_TOP:
nMoveY = bShift ? 1 : -1;
break;
case DIR_LEFT:
nMoveX = bShift ? 1 : -1;
break;
}
SCCOL nCurX;
SCROW nCurY;
aViewData.GetMoveCursor( nCurX,nCurY );
SCCOL nNewX = nCurX;
SCROW nNewY = nCurY;
SCTAB nTab = aViewData.CurrentTabForData();
ScMarkData& rMark = aViewData.GetMarkData();
ScDocument& rDoc = aViewData.GetDocument();
if (rMark.IsMarked() || rMark.IsMultiMarked())
{
rDoc.GetNextPos( nNewX, nNewY, nTab, nMoveX, nMoveY, true, false, rMark );
MoveCursorRel( nNewX - nCurX, nNewY - nCurY, SC_FOLLOW_LINE, false, true );
// update input line even if cursor was not moved
if ( nNewX == nCurX && nNewY == nCurY )
aViewData.UpdateInputHandler(true);
}
else
{
// After Tab and Enter back to the starting column again.
const SCCOL nTabStartCol = ((nMoveY != 0 && !nMoveX) ? aViewData.GetTabStartCol() : SC_TABSTART_NONE);
rDoc.GetNextPos( nNewX, nNewY, nTab, nMoveX, nMoveY, false, true, rMark, nTabStartCol );
MoveCursorRel( nNewX - nCurX, nNewY - nCurY, SC_FOLLOW_LINE, false);
}
}
bool ScTabView::MoveCursorKeyInput( const KeyEvent& rKeyEvent )
{
const vcl::KeyCode& rKCode = rKeyEvent.GetKeyCode();
enum { MOD_NONE, MOD_CTRL, MOD_ALT, MOD_BOTH } eModifier =
rKCode.IsMod1() ?
(rKCode.IsMod2() ? MOD_BOTH : MOD_CTRL) :
(rKCode.IsMod2() ? MOD_ALT : MOD_NONE);
bool bSel = rKCode.IsShift();
sal_uInt16 nCode = rKCode.GetCode();
// CURSOR keys
SCCOL nDX = 0;
SCROW nDY = 0;
switch( nCode )
{
case KEY_LEFT: nDX = -1; break;
case KEY_RIGHT: nDX = 1; break;
case KEY_UP: nDY = -1; break;
case KEY_DOWN: nDY = 1; break;
}
if( nDX != 0 || nDY != 0 )
{
switch( eModifier )
{
case MOD_NONE: MoveCursorRel( nDX, nDY, SC_FOLLOW_LINE, bSel ); break;
case MOD_CTRL: MoveCursorArea( nDX, nDY, SC_FOLLOW_JUMP, bSel ); break;
default:
{
// added to avoid warnings
}
}
// always true to suppress changes of col/row size (ALT+CURSOR)
return true;
}
// PAGEUP/PAGEDOWN
if( (nCode == KEY_PAGEUP) || (nCode == KEY_PAGEDOWN) )
{
nDX = (nCode == KEY_PAGEUP) ? -1 : 1;
switch( eModifier )
{
case MOD_NONE: MoveCursorPage( 0, static_cast<SCCOLROW>(nDX), SC_FOLLOW_FIX, bSel ); break;
case MOD_ALT: MoveCursorPage( nDX, 0, SC_FOLLOW_FIX, bSel ); break;
case MOD_CTRL: SelectNextTab( nDX, false ); break;
default:
{
// added to avoid warnings
}
}
return true;
}
// HOME/END
if( (nCode == KEY_HOME) || (nCode == KEY_END) )
{
nDX = (nCode == KEY_HOME) ? -1 : 1;
ScFollowMode eMode = (nCode == KEY_HOME) ? SC_FOLLOW_LINE : SC_FOLLOW_JUMP_END;
switch( eModifier )
{
case MOD_NONE: MoveCursorEnd( nDX, 0, eMode, bSel ); break;
case MOD_CTRL: MoveCursorEnd( nDX, static_cast<SCCOLROW>(nDX), eMode, bSel ); break;
default:
{
// added to avoid warnings
}
}
return true;
}
return false;
}
// next/previous unprotected cell
void ScTabView::FindNextUnprot( bool bShift, bool bInSelection )
{
short nMove = bShift ? -1 : 1;
ScMarkData& rMark = aViewData.GetMarkData();
bool bMarked = bInSelection && (rMark.IsMarked() || rMark.IsMultiMarked());
SCCOL nCurX;
SCROW nCurY;
aViewData.GetMoveCursor( nCurX,nCurY );
SCCOL nNewX = nCurX;
SCROW nNewY = nCurY;
SCTAB nTab = aViewData.CurrentTabForData();
ScDocument& rDoc = aViewData.GetDocument();
rDoc.GetNextPos( nNewX,nNewY, nTab, nMove,0, bMarked, true, rMark );
SCCOL nTabCol = aViewData.GetTabStartCol();
if ( nTabCol == SC_TABSTART_NONE )
nTabCol = nCurX; // back to this column after Enter
MoveCursorRel( nNewX-nCurX, nNewY-nCurY, SC_FOLLOW_LINE, false, true );
// TabCol is reset in MoveCursorRel...
aViewData.SetTabStartCol( nTabCol );
}
void ScTabView::MarkColumns()
{
SCCOL nStartCol;
SCCOL nEndCol;
ScMarkData& rMark = aViewData.GetMarkData();
if (rMark.IsMarked())
{
const ScRange& aMarkRange = rMark.GetMarkArea();
nStartCol = aMarkRange.aStart.Col();
nEndCol = aMarkRange.aEnd.Col();
}
else
{
SCROW nDummy;
aViewData.GetMoveCursor( nStartCol, nDummy );
nEndCol=nStartCol;
}
SCTAB nTab = aViewData.CurrentTabForData();
ScDocument& rDoc = aViewData.GetDocument();
DoneBlockMode();
InitBlockMode( nStartCol,0, nTab );
MarkCursor( nEndCol, rDoc.MaxRow(), nTab );
SelectionChanged();
}
void ScTabView::MarkRows()
{
SCROW nStartRow;
SCROW nEndRow;
ScMarkData& rMark = aViewData.GetMarkData();
if (rMark.IsMarked())
{
const ScRange& aMarkRange = rMark.GetMarkArea();
nStartRow = aMarkRange.aStart.Row();
nEndRow = aMarkRange.aEnd.Row();
}
else
{
SCCOL nDummy;
aViewData.GetMoveCursor( nDummy, nStartRow );
nEndRow=nStartRow;
}
SCTAB nTab = aViewData.CurrentTabForData();
ScDocument& rDoc = aViewData.GetDocument();
DoneBlockMode();
InitBlockMode( 0,nStartRow, nTab );
MarkCursor( rDoc.MaxCol(), nEndRow, nTab );
SelectionChanged();
}
void ScTabView::MarkColumns(SCCOL nCol, sal_Int16 nModifier)
{
ScDocument& rDoc = aViewData.GetDocument();
SCCOL nStartCol = nCol;
SCTAB nTab = aViewData.CurrentTabForData();
if ((nModifier & KEY_SHIFT) == KEY_SHIFT)
bMoveIsShift = true;
if (ScModule::get()->IsFormulaMode())
{
DoneRefMode( nModifier != 0 );
InitRefMode( nCol, 0, nTab, SC_REFTYPE_REF );
UpdateRef( nCol, rDoc.MaxRow(), nTab );
bMoveIsShift = false;
}
else
{
DoneBlockMode( nModifier != 0 );
InitBlockMode( nStartCol, 0, nTab, true, true);
MarkCursor( nCol, rDoc.MaxRow(), nTab );
bMoveIsShift = false;
SetCursor( nCol, 0 );
SelectionChanged();
}
}
void ScTabView::MarkRows(SCROW nRow, sal_Int16 nModifier)
{
ScDocument& rDoc = aViewData.GetDocument();
SCROW nStartRow = nRow;
SCTAB nTab = aViewData.CurrentTabForData();
if ((nModifier & KEY_SHIFT) == KEY_SHIFT)
bMoveIsShift = true;
if (ScModule::get()->IsFormulaMode())
{
DoneRefMode( nModifier != 0 );
InitRefMode( 0, nRow, nTab, SC_REFTYPE_REF );
UpdateRef( rDoc.MaxCol(), nRow, nTab );
bMoveIsShift = false;
}
else
{
DoneBlockMode( nModifier != 0 );
InitBlockMode( 0, nStartRow, nTab, true, false, true );
MarkCursor( rDoc.MaxCol(), nRow, nTab );
bMoveIsShift = false;
SetCursor( 0, nRow );
SelectionChanged();
}
}
void ScTabView::HighlightOverlay()
{
if (!officecfg::Office::Calc::Content::Display::ColumnRowHighlighting::get())
{
aViewData.GetHighlightData().ResetMark();
UpdateHighlightOverlay();
return;
}
ScAddress aCell = GetViewData().GetCurPos();
SCROW nRow = aCell.Row();
SCCOL nCol = aCell.Col();
bool nModifier = false; // modifier key pressed?
DoneBlockModeHighlight( nModifier );
InitBlockModeHighlight( nCol, 0, aCell.Tab(), true, false);
nModifier = true;
DoneBlockModeHighlight( nModifier );
InitBlockModeHighlight( 0, nRow, aCell.Tab(), false, true );
}
void ScTabView::MarkDataArea( bool bIncludeCursor )
{
ScDocument& rDoc = aViewData.GetDocument();
SCTAB nTab = aViewData.CurrentTabForData();
SCCOL nStartCol = aViewData.GetCurX();
SCROW nStartRow = aViewData.GetCurY();
SCCOL nEndCol = nStartCol;
SCROW nEndRow = nStartRow;
rDoc.GetDataArea( nTab, nStartCol, nStartRow, nEndCol, nEndRow, bIncludeCursor, false );
HideAllCursors();
DoneBlockMode();
InitBlockMode( nStartCol, nStartRow, nTab );
MarkCursor( nEndCol, nEndRow, nTab );
ShowAllCursors();
SelectionChanged();
}
void ScTabView::MarkMatrixFormula()
{
ScDocument& rDoc = aViewData.GetDocument();
ScAddress aCursor( aViewData.GetCurX(), aViewData.GetCurY(), aViewData.CurrentTabForData() );
ScRange aMatrix;
if ( rDoc.GetMatrixFormulaRange( aCursor, aMatrix ) )
{
MarkRange( aMatrix, false ); // cursor is already within the range
}
}
void ScTabView::MarkRange( const ScRange& rRange, bool bSetCursor, bool bContinue )
{
ScDocument& rDoc = aViewData.GetDocument();
SCTAB nTab = rRange.aStart.Tab();
SetTabNo( nTab );
HideAllCursors();
DoneBlockMode( bContinue ); // bContinue==true -> clear old mark
if (bSetCursor) // if Cursor is set, also always align
{
SCCOL nAlignX = rRange.aStart.Col();
SCROW nAlignY = rRange.aStart.Row();
bool bCol = ( rRange.aStart.Col() == 0 && rRange.aEnd.Col() == rDoc.MaxCol() ) && !aViewData.GetDocument().IsInVBAMode();
bool bRow = ( rRange.aStart.Row() == 0 && rRange.aEnd.Row() == rDoc.MaxRow() );
if ( bCol )
nAlignX = aViewData.GetPosX(WhichH(aViewData.GetActivePart()));
if ( bRow )
nAlignY = aViewData.GetPosY(WhichV(aViewData.GetActivePart()));
AlignToCursor( nAlignX, nAlignY, SC_FOLLOW_JUMP );
}
InitBlockMode( rRange.aStart.Col(), rRange.aStart.Row(), nTab );
MarkCursor( rRange.aEnd.Col(), rRange.aEnd.Row(), nTab );
if (bSetCursor)
{
SCCOL nPosX = rRange.aStart.Col();
SCROW nPosY = rRange.aStart.Row();
rDoc.SkipOverlapped(nPosX, nPosY, nTab);
aViewData.ResetOldCursor();
SetCursor( nPosX, nPosY );
}
ShowAllCursors();
SelectionChanged();
}
void ScTabView::Unmark()
{
ScMarkData& rMark = aViewData.GetMarkData();
if ( rMark.IsMarked() || rMark.IsMultiMarked() )
{
SCCOL nCurX;
SCROW nCurY;
aViewData.GetMoveCursor( nCurX,nCurY );
MoveCursorAbs( nCurX, nCurY, SC_FOLLOW_NONE, false, false );
SelectionChanged();
}
}
void ScTabView::SetMarkData( const ScMarkData& rNew )
{
DoneBlockMode();
InitOwnBlockMode( rNew.GetMarkArea());
aViewData.GetMarkData() = rNew;
MarkDataChanged();
}
void ScTabView::MarkDataChanged()
{
// has to be called after making direct changes to mark data (not via MarkCursor etc)
UpdateSelectionOverlay();
}
void ScTabView::SelectNextTab( short nDir, bool bExtendSelection )
{
if (!nDir)
return;
OSL_ENSURE( nDir==-1 || nDir==1, "SelectNextTab: invalid value");
ScDocument& rDoc = aViewData.GetDocument();
SCTAB nTab = aViewData.CurrentTabForData();
SCTAB nNextTab = nTab;
SCTAB nCount = rDoc.GetTableCount();
if (nDir < 0)
{
do
{
--nNextTab;
if (nNextTab < 0)
{
if (officecfg::Office::Calc::Input::WrapNextPrevSheetTab::get())
nNextTab = nCount;
else
return;
}
if (rDoc.IsVisible(nNextTab))
break;
} while (nNextTab != nTab);
}
else // nDir > 0
{
do
{
++nNextTab;
if (nNextTab >= nCount)
{
if (officecfg::Office::Calc::Input::WrapNextPrevSheetTab::get())
nNextTab = 0;
else
return;
}
if (rDoc.IsVisible(nNextTab))
break;
} while (nNextTab != nTab);
}
if (nNextTab == nTab)
return;
SetTabNo(nNextTab, false, bExtendSelection);
PaintExtras();
}
void ScTabView::SelectTabPage( const sal_uInt16 nTab )
{
pTabControl->SwitchToPageId( nTab );
}
// SetTabNo - set the displayed sheet
void ScTabView::SetTabNo( SCTAB nTab, bool bNew, bool bExtendSelection, bool bSameTabButMoved )
{
ScTabViewShell* pViewShell = aViewData.GetViewShell();
pViewShell->SetTabChangeInProgress(true);
if ( !ValidTab(nTab) )
{
OSL_FAIL("SetTabNo: invalid sheet");
return;
}
if (!bNew && nTab == aViewData.CurrentTabForData())
return;
// FormShell would like to be informed before the switch
FmFormShell* pFormSh = aViewData.GetViewShell()->GetFormShell();
if (pFormSh)
{
bool bAllowed = pFormSh->PrepareClose();
if (!bAllowed)
{
//! error message? or does FormShell do it?
//! return error flag and cancel actions
return; // FormShell says that it can not be switched
}
}
// not InputEnterHandler due to reference input
ScDocument& rDoc = aViewData.GetDocument();
rDoc.MakeTable( nTab );
// Update pending row heights before switching the sheet, so Reschedule from the progress bar
// doesn't paint the new sheet with old heights
aViewData.GetDocShell()->UpdatePendingRowHeights( nTab );
SCTAB nTabCount = rDoc.GetTableCount();
SCTAB nOldPos = nTab;
while (!rDoc.IsVisible(nTab)) // search for next visible
{
bool bUp = (nTab>=nOldPos);
if (bUp)
{
++nTab;
if (nTab>=nTabCount)
{
nTab = nOldPos;
bUp = false;
}
}
if (!bUp)
{
if (nTab != 0)
--nTab;
else
{
OSL_FAIL("no visible sheets");
rDoc.SetVisible( 0, true );
}
}
}
// #i71490# Deselect drawing objects before changing the sheet number in view data,
// so the handling of notes still has the sheet selected on which the notes are.
DrawDeselectAll();
ScModule* pScMod = ScModule::get();
bool bRefMode = pScMod->IsFormulaMode();
if ( !bRefMode ) // query, so that RefMode works when switching sheet
{
DoneBlockMode();
pSelEngine->Reset(); // reset all flags, including locked modifiers
aViewData.SetRefTabNo( nTab );
}
ScSplitPos eOldActive = aViewData.GetActivePart(); // before switching
bool bFocus = pGridWin[eOldActive] && pGridWin[eOldActive]->HasFocus();
aViewData.SetTabNo( nTab );
if (mpSpellCheckCxt)
mpSpellCheckCxt->setTabNo( nTab );
// UpdateShow before SetCursor, so that UpdateAutoFillMark finds the correct
// window (is called from SetCursor)
UpdateShow();
aViewData.GetView()->TestHintWindow();
SfxBindings& rBindings = aViewData.GetBindings();
ScMarkData& rMark = aViewData.GetMarkData();
bool bAllSelected = true;
for (SCTAB nSelTab = 0; nSelTab < nTabCount; ++nSelTab)
{
if (!rDoc.IsVisible(nSelTab) || rMark.GetTableSelect(nSelTab))
{
if (nTab == nSelTab)
// This tab is already in selection. Keep the current
// selection.
bExtendSelection = true;
}
else
{
bAllSelected = false;
if (bExtendSelection)
// We got what we need. No need to stay in the loop.
break;
}
}
if (bAllSelected && !bNew)
// #i6327# if all tables are selected, a selection event (#i6330#) will deselect all
// (not if called with bNew to update settings)
bExtendSelection = false;
if (bExtendSelection)
rMark.SelectTable( nTab, true );
else
{
rMark.SelectOneTable( nTab );
rBindings.Invalidate( FID_FILL_TAB );
rBindings.Invalidate( FID_TAB_DESELECTALL );
}
bool bUnoRefDialog = pScMod->IsRefDialogOpen() && pScMod->GetCurRefDlgId() == WID_SIMPLE_REF;
// recalc zoom-dependent values (before TabChanged, before UpdateEditViewPos)
RefreshZoom(/*bRecalcScale*/false); // no need to call RecalcScale() here, because we will do it in TabChanged()
UpdateVarZoom();
if ( bRefMode ) // hide EditView if necessary (after aViewData.SetTabNo !)
{
for (VclPtr<ScGridWindow> & pWin : pGridWin)
{
if (pWin && pWin->IsVisible())
pWin->UpdateEditViewPos();
}
}
TabChanged(bSameTabButMoved); // DrawView
collectUIInformation({{"TABLE", OUString::number(nTab)}});
UpdateVisibleRange();
aViewData.GetViewShell()->WindowChanged(); // if the active window has changed
aViewData.ResetOldCursor();
SetCursor( aViewData.GetCurX(), aViewData.GetCurY(), true );
if ( !bUnoRefDialog )
aViewData.GetViewShell()->DisconnectAllClients(); // important for floating frames
else
{
// hide / show inplace client
ScClient* pClient = static_cast<ScClient*>(aViewData.GetViewShell()->GetIPClient());
if ( pClient && pClient->IsObjectInPlaceActive() )
{
tools::Rectangle aObjArea = pClient->GetObjArea();
if ( nTab == aViewData.GetRefTabNo() )
{
// move to its original position
SdrOle2Obj* pDrawObj = pClient->GetDrawObj();
if ( pDrawObj )
{
tools::Rectangle aRect = pDrawObj->GetLogicRect();
MapMode aMapMode( MapUnit::Map100thMM );
Size aOleSize = pDrawObj->GetOrigObjSize( &aMapMode );
aRect.SetSize( aOleSize );
aObjArea = aRect;
}
}
else
{
// move to an invisible position
aObjArea.SetPos( Point( 0, -2*aObjArea.GetHeight() ) );
}
pClient->SetObjArea( aObjArea );
}
}
if ( bFocus && aViewData.GetActivePart() != eOldActive && !bRefMode )
ActiveGrabFocus(); // grab focus to the pane that's active now
// freeze
bool bResize = false;
if ( aViewData.GetHSplitMode() == SC_SPLIT_FIX )
if (aViewData.UpdateFixX())
bResize = true;
if ( aViewData.GetVSplitMode() == SC_SPLIT_FIX )
if (aViewData.UpdateFixY())
bResize = true;
if (bResize)
RepeatResize();
InvalidateSplit();
if ( aViewData.IsPagebreakMode() )
UpdatePageBreakData(); //! asynchronously ??
// Form Layer must know the visible area of the new sheet
// that is why MapMode must already be correct here
SyncGridWindowMapModeFromDrawMapMode();
SetNewVisArea();
// disable invalidations for kit during tab switching
{
SfxLokCallbackInterface* pCallback = pViewShell->getLibreOfficeKitViewCallback();
pViewShell->setLibreOfficeKitViewCallback(nullptr);
comphelper::ScopeGuard aOutputGuard(
[pViewShell, pCallback] {
pViewShell->setLibreOfficeKitViewCallback(pCallback);
});
PaintGrid();
}
PaintTop();
PaintLeft();
PaintExtras();
DoResize( aBorderPos, aFrameSize );
rBindings.Invalidate( SID_DELETE_PRINTAREA ); // Menu
rBindings.Invalidate( FID_DEL_MANUALBREAKS );
rBindings.Invalidate( FID_RESET_PRINTZOOM );
rBindings.Invalidate( SID_STATUS_DOCPOS ); // Status bar
rBindings.Invalidate( SID_ROWCOL_SELCOUNT ); // Status bar
rBindings.Invalidate( SID_STATUS_PAGESTYLE ); // Status bar
rBindings.Invalidate( SID_CURRENTTAB ); // Navigator
rBindings.Invalidate( SID_STYLE_FAMILY2 ); // Designer
rBindings.Invalidate( SID_STYLE_FAMILY4 ); // Designer
rBindings.Invalidate( SID_TABLES_COUNT );
rBindings.Invalidate(FID_CURRENT_SHEET_VIEW);
if (pScMod->IsRefDialogOpen())
{
sal_uInt16 nCurRefDlgId=pScMod->GetCurRefDlgId();
SfxViewFrame& rViewFrm = aViewData.GetViewShell()->GetViewFrame();
SfxChildWindow* pChildWnd = rViewFrm.GetChildWindow( nCurRefDlgId );
if (pChildWnd)
{
if (pChildWnd->GetController())
{
IAnyRefDialog* pRefDlg = dynamic_cast<IAnyRefDialog*>(pChildWnd->GetController().get());
if (pRefDlg)
pRefDlg->ViewShellChanged();
}
}
}
OnLibreOfficeKitTabChanged();
pViewShell->SetTabChangeInProgress(false);
}
void ScTabView::AddWindowToForeignEditView(SfxViewShell* pViewShell, ScSplitPos eWhich)
{
aExtraEditViewManager.Add(pViewShell, eWhich);
}
void ScTabView::RemoveWindowFromForeignEditView(SfxViewShell* pViewShell, ScSplitPos eWhich)
{
aExtraEditViewManager.Remove(pViewShell, eWhich);
}
void ScTabView::OnLibreOfficeKitTabChanged()
{
if (!comphelper::LibreOfficeKit::isActive())
return;
ScTabViewShell* pThisViewShell = aViewData.GetViewShell();
SCTAB nThisTabNo = pThisViewShell->GetViewData().CurrentTabForData();
auto lTabSwitch = [pThisViewShell, nThisTabNo] (ScTabViewShell* pOtherViewShell)
{
ScViewData& rOtherViewData = pOtherViewShell->GetViewData();
SCTAB nOtherTabNo = rOtherViewData.CurrentTabForData();
if (nThisTabNo == nOtherTabNo)
{
for (int i = 0; i < 4; ++i)
{
if (rOtherViewData.HasEditView(ScSplitPos(i)))
{
pThisViewShell->AddWindowToForeignEditView(pOtherViewShell, ScSplitPos(i));
}
}
}
else
{
for (int i = 0; i < 4; ++i)
{
if (rOtherViewData.HasEditView(ScSplitPos(i)))
{
pThisViewShell->RemoveWindowFromForeignEditView(pOtherViewShell, ScSplitPos(i));
}
}
}
};
SfxLokHelper::forEachOtherView(pThisViewShell, lTabSwitch);
pThisViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_INVALIDATE_HEADER, "all"_ostr);
if (pThisViewShell->GetInputHandler())
pThisViewShell->GetInputHandler()->UpdateLokReferenceMarks();
}
// TextEditOverlayObject for TextOnOverlay TextEdit. It directly
// implements needed EditViewCallbacks and also hosts the
// OverlaySelection
namespace
{
class ScTextEditOverlayObject : public sdr::overlay::OverlayObject, public EditViewCallbacks
{
// the ScTabView the TextEdit is running at and the ScSplitPos to
// identify the associated data
ScTabView& mrScTabView;
ScSplitPos maScSplitPos;
// this separate OverlayObject holds and creates the selection
// visualization, so it can be changed/refreshed without changing
// the Text or TextEditBackground
std::unique_ptr<sdr::overlay::OverlaySelection> mxOverlayTransparentSelection;
// geometry creation for OverlayObject, in this case the extraction
// of edited Text from the setup EditEngine
virtual drawinglayer::primitive2d::Primitive2DContainer createOverlayObjectPrimitive2DSequence() override;
// EditView overrides
virtual void EditViewInvalidate(const tools::Rectangle& rRect) override;
virtual void EditViewSelectionChange() override;
virtual OutputDevice& EditViewOutputDevice() const override;
virtual Point EditViewPointerPosPixel() const override;
virtual css::uno::Reference<css::datatransfer::clipboard::XClipboard> GetClipboard() const override;
virtual css::uno::Reference<css::datatransfer::dnd::XDropTarget> GetDropTarget() override;
virtual void EditViewInputContext(const InputContext& rInputContext) override;
virtual void EditViewCursorRect(const tools::Rectangle& rRect, int nExtTextInputWidth) override;
public:
// create using system selection color & ScTabView
ScTextEditOverlayObject(
const Color& rColor,
ScTabView& rScTabView,
ScSplitPos aScSplitPos);
virtual ~ScTextEditOverlayObject() override;
// override to mix in TextEditBackground and the Text transformed
// as needed
virtual drawinglayer::primitive2d::Primitive2DContainer getOverlayObjectPrimitive2DSequence() const override;
// access to OverlaySelection to add to OverlayManager
sdr::overlay::OverlayObject* getOverlaySelection()
{
return mxOverlayTransparentSelection.get();
}
void RefeshTextEditOverlay()
{
// currently just deletes all created stuff, this may
// be fine-tuned later if needed
objectChange();
}
};
ScTextEditOverlayObject::ScTextEditOverlayObject(
const Color& rColor,
ScTabView& rScTabView,
ScSplitPos aScSplitPos)
: OverlayObject(rColor)
, mrScTabView(rScTabView)
, maScSplitPos(aScSplitPos)
{
// no AA for TextEdit overlay
allowAntiAliase(false);
// establish EditViewCallbacks
const ScViewData& rScViewData(mrScTabView.GetViewData());
EditView* pEditView(rScViewData.GetEditView(maScSplitPos));
DBG_ASSERT(nullptr != pEditView, "NO access to EditView in ScTextEditOverlayObject!");
pEditView->setEditViewCallbacks(this);
// initialize empty OverlaySelection
std::vector<basegfx::B2DRange> aEmptySelection{};
mxOverlayTransparentSelection.reset(new sdr::overlay::OverlaySelection(
sdr::overlay::OverlayType::Transparent, rColor, std::move(aEmptySelection), true));
}
ScTextEditOverlayObject::~ScTextEditOverlayObject()
{
// delete OverlaySelection - this will also remove itself from
// OverlayManager already
mxOverlayTransparentSelection.reset();
// shutdown EditViewCallbacks
const ScViewData& rScViewData(mrScTabView.GetViewData());
EditView* pEditView(rScViewData.GetEditView(maScSplitPos));
DBG_ASSERT(nullptr != pEditView, "NO access to EditView in ScTextEditOverlayObject!");
pEditView->setEditViewCallbacks(nullptr);
// remove myself
if (getOverlayManager())
getOverlayManager()->remove(*this);
}
drawinglayer::primitive2d::Primitive2DContainer ScTextEditOverlayObject::createOverlayObjectPrimitive2DSequence()
{
// extract primitive representation from active EditEngine
drawinglayer::primitive2d::Primitive2DContainer aRetval;
ScViewData& rScViewData(mrScTabView.GetViewData());
const EditView* pEditView(rScViewData.GetEditView(maScSplitPos));
assert(pEditView && "NO access to EditView in ScTextEditOverlayObject!");
// get text data in LogicMode
OutputDevice& rOutDev(pEditView->GetOutputDevice());
const MapMode aOrig(rOutDev.GetMapMode());
rOutDev.SetMapMode(rScViewData.GetLogicMode());
// StripPortions from EditEngine.
// use no transformations. The result will be in logic coordinates
// based on aEditRectangle and the EditEngine setup, see
// ScViewData::SetEditEngine
TextHierarchyBreakup aBreakup;
pEditView->getEditEngine().StripPortions(aBreakup);
aRetval = aBreakup.getTextPortionPrimitives();
rOutDev.SetMapMode(aOrig);
return aRetval;
}
void ScTextEditOverlayObject::EditViewInvalidate(const tools::Rectangle& rRect)
{
if (comphelper::LibreOfficeKit::isActive())
{
// UT testPageDownInvalidation from CppunitTest_sc_tiledrendering
// *needs* the direct invalidates formerly done in
// EditView::InvalidateWindow when no EditViewCallbacks are set
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
pActiveWin->Invalidate(rRect);
}
RefeshTextEditOverlay();
}
void ScTextEditOverlayObject::EditViewSelectionChange()
{
ScViewData& rScViewData(mrScTabView.GetViewData());
EditView* pEditView(rScViewData.GetEditView(maScSplitPos));
assert(pEditView && "NO access to EditView in ScTextEditOverlayObject!");
// get the selection rectangles
std::vector<tools::Rectangle> aRects;
pEditView->GetSelectionRectangles(aRects);
std::vector<basegfx::B2DRange> aLogicRanges;
if (aRects.empty())
{
// if none, reset selection at OverlayObject and we are done
mxOverlayTransparentSelection->setRanges(std::move(aLogicRanges));
return;
}
// create needed transformations
// LogicMode -> DiscreteViewCoordinates (Pixels)
basegfx::B2DHomMatrix aTransformToPixels;
OutputDevice& rOutDev(pEditView->GetOutputDevice());
const MapMode aOrig(rOutDev.GetMapMode());
rOutDev.SetMapMode(rScViewData.GetLogicMode());
aTransformToPixels = rOutDev.GetViewTransformation();
// DiscreteViewCoordinates (Pixels) -> LogicDrawCoordinates
basegfx::B2DHomMatrix aTransformToDrawCoordinates;
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
rOutDev.SetMapMode(pActiveWin->GetDrawMapMode());
aTransformToDrawCoordinates = rOutDev.GetInverseViewTransformation();
rOutDev.SetMapMode(aOrig);
for (const auto& aRect : aRects)
{
basegfx::B2DRange aRange(aRect.Left(), aRect.Top(), aRect.Right(), aRect.Bottom());
// range to pixels
aRange.transform(aTransformToPixels);
// grow by 1px for slight distance/overlap
aRange.grow(1.0);
// to drawinglayer coordinates & add
aRange.transform(aTransformToDrawCoordinates);
aLogicRanges.emplace_back(aRange);
}
mxOverlayTransparentSelection->setRanges(std::move(aLogicRanges));
}
OutputDevice& ScTextEditOverlayObject::EditViewOutputDevice() const
{
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
return *pActiveWin->GetOutDev();
}
Point ScTextEditOverlayObject::EditViewPointerPosPixel() const
{
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
return pActiveWin->GetPointerPosPixel();
}
css::uno::Reference<css::datatransfer::clipboard::XClipboard> ScTextEditOverlayObject::GetClipboard() const
{
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
return pActiveWin->GetClipboard();
}
css::uno::Reference<css::datatransfer::dnd::XDropTarget> ScTextEditOverlayObject::GetDropTarget()
{
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
return pActiveWin->GetDropTarget();
}
void ScTextEditOverlayObject::EditViewInputContext(const InputContext& rInputContext)
{
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
pActiveWin->SetInputContext(rInputContext);
}
void ScTextEditOverlayObject::EditViewCursorRect(const tools::Rectangle& rRect, int nExtTextInputWidth)
{
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
pActiveWin->SetCursorRect(&rRect, nExtTextInputWidth);
}
drawinglayer::primitive2d::Primitive2DContainer ScTextEditOverlayObject::getOverlayObjectPrimitive2DSequence() const
{
drawinglayer::primitive2d::Primitive2DContainer aRetval;
ScViewData& rScViewData(mrScTabView.GetViewData());
EditView* pEditView(rScViewData.GetEditView(maScSplitPos));
assert(pEditView && "NO access to EditView in ScTextEditOverlayObject!");
// call base implementation to get TextPrimitives in logic coordinates
// directly from the setup EditEngine
drawinglayer::primitive2d::Primitive2DContainer aText(
OverlayObject::getOverlayObjectPrimitive2DSequence());
if (aText.empty())
// no Text, done, return result
return aRetval;
// remember MapMode and restore at exit - we do not want
// to change it outside this method
OutputDevice& rOutDev(pEditView->GetOutputDevice());
const MapMode aOrig(rOutDev.GetMapMode());
// create text edit background based on pixel coordinates
// of involved Cells and append
{
const SCCOL nCol1(rScViewData.GetEditStartCol());
const SCROW nRow1(rScViewData.GetEditStartRow());
const SCCOL nCol2(rScViewData.GetEditEndCol());
const SCROW nRow2(rScViewData.GetEditEndRow());
const Point aStart(rScViewData.GetScrPos(nCol1, nRow1, maScSplitPos));
const Point aEnd(rScViewData.GetScrPos(nCol2+1, nRow2+1, maScSplitPos));
if (aStart != aEnd)
{
// create outline polygon. Shrink by 1px due to working
// with pixel positions one cell right and below. We are
// in discrete (pixel) coordinates with start/end here,
// so just subtract '1' from x and y to do that
basegfx::B2DPolyPolygon aOutline(basegfx::utils::createPolygonFromRect(
basegfx::B2DRange(
aStart.X(), aStart.Y(),
aEnd.X() - 1, aEnd.Y() - 1)));
// transform from Pixels to LogicDrawCoordinates
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
rOutDev.SetMapMode(pActiveWin->GetDrawMapMode());
aOutline.transform(rOutDev.GetInverseViewTransformation());
aRetval.push_back(
rtl::Reference<drawinglayer::primitive2d::PolyPolygonColorPrimitive2D>(
new drawinglayer::primitive2d::PolyPolygonColorPrimitive2D(
std::move(aOutline),
pEditView->GetBackgroundColor().getBColor())));
}
}
// create embedding transformation for Text itself and
// append Text
{
basegfx::B2DHomMatrix aTransform;
// transform by TextPaint StartPosition (Top-Left). This corresponds
// to aEditRectangle and the EditEngine setup, see
// ScViewData::SetEditEngine. Offset is in LogicCoordinates/LogicMode
const Point aStartPosition(pEditView->CalculateTextPaintStartPosition());
aTransform.translate(aStartPosition.X(), aStartPosition.Y());
// LogicMode -> DiscreteViewCoordinates (Pixels)
rOutDev.SetMapMode(rScViewData.GetLogicMode());
aTransform *= rOutDev.GetViewTransformation();
// DiscreteViewCoordinates (Pixels) -> LogicDrawCoordinates
ScGridWindow* pActiveWin(static_cast<ScGridWindow*>(mrScTabView.GetWindowByPos(maScSplitPos)));
rOutDev.SetMapMode(pActiveWin->GetDrawMapMode());
aTransform *= rOutDev.GetInverseViewTransformation();
// add text embedded to created transformation
aRetval.push_back(rtl::Reference<drawinglayer::primitive2d::TransformPrimitive2D>(
new drawinglayer::primitive2d::TransformPrimitive2D(
aTransform, std::move(aText))));
}
rOutDev.SetMapMode(aOrig);
return aRetval;
}
} // end of anonymous namespace
void ScTabView::RefeshTextEditOverlay()
{
// find the ScTextEditOverlayObject in the OverlayGroup and
// call refresh there. It is also possible to have separate
// holders of that data, so no find/identification would be
// needed, but having all associated OverlayObjects in one
// group makes handling simple(r). It may also be that the
// cursor visualization will be added to that group later
for (sal_uInt32 a(0); a < maTextEditOverlayGroup.count(); a++)
{
sdr::overlay::OverlayObject& rOverlayObject(maTextEditOverlayGroup.getOverlayObject(a));
ScTextEditOverlayObject* pScTextEditOverlayObject(dynamic_cast<ScTextEditOverlayObject*>(&rOverlayObject));
if (nullptr != pScTextEditOverlayObject)
{
pScTextEditOverlayObject->RefeshTextEditOverlay();
}
}
}
void ScTabView::MakeEditView( ScEditEngineDefaulter& rEngine, SCCOL nCol, SCROW nRow )
{
DrawDeselectAll();
if (pDrawView)
DrawEnableAnim( false );
EditView* pSpellingView = aViewData.GetSpellingView();
for (sal_uInt16 i = 0; i < 4; i++)
{
if (pGridWin[i] && pGridWin[i]->IsVisible() && !aViewData.HasEditView(ScSplitPos(i)))
{
const ScSplitPos aScSplitPos(static_cast<ScSplitPos>(i));
ScHSplitPos eHWhich = WhichH(aScSplitPos);
ScVSplitPos eVWhich = WhichV(aScSplitPos);
SCCOL nScrX = aViewData.GetPosX( eHWhich );
SCROW nScrY = aViewData.GetPosY( eVWhich );
bool bPosVisible =
( nCol >= nScrX && nCol <= nScrX + aViewData.VisibleCellsX(eHWhich) - 1 &&
nRow >= nScrY && nRow <= nScrY + aViewData.VisibleCellsY(eVWhich) - 1 );
// for the active part, create edit view even if outside the visible area,
// so input isn't lost (and the edit view may be scrolled into the visible area)
// #i26433# during spelling, the spelling view must be active
if ( bPosVisible || aViewData.GetActivePart() == aScSplitPos ||
( pSpellingView && aViewData.GetEditView(aScSplitPos) == pSpellingView ) )
{
VclPtr<ScGridWindow> pScGridWindow(pGridWin[aScSplitPos]);
pScGridWindow->HideCursor();
pScGridWindow->DeleteCursorOverlay();
pScGridWindow->DeleteAutoFillOverlay();
pScGridWindow->DeleteCopySourceOverlay();
// MapMode must be set after HideCursor
pScGridWindow->SetMapMode(aViewData.GetLogicMode());
if ( !bPosVisible )
{
// move the edit view area to the real (possibly negative) position,
// or hide if completely above or left of the window
pScGridWindow->UpdateEditViewPos();
}
aViewData.SetEditEngine(aScSplitPos, rEngine, pScGridWindow, nCol,
nRow);
// get OverlayManager and initialize TextEditOnOverlay for it
rtl::Reference<sdr::overlay::OverlayManager> xOverlayManager = pScGridWindow->getOverlayManager();
if (xOverlayManager.is() && aViewData.HasEditView(aScSplitPos))
{
const Color aHilightColor(SvtOptionsDrawinglayer::getHilightColor());
std::unique_ptr<ScTextEditOverlayObject> pNewScTextEditOverlayObject(
new ScTextEditOverlayObject(
aHilightColor,
*this,
aScSplitPos));
// add TextEditOverlayObject and the OverlaySelection hosted by it
// to the OverlayManager (to make visible) and to the local
// reference TextEditOverlayGroup (to access if needed)
xOverlayManager->add(*pNewScTextEditOverlayObject);
xOverlayManager->add(*pNewScTextEditOverlayObject->getOverlaySelection());
maTextEditOverlayGroup.append(std::move(pNewScTextEditOverlayObject));
}
}
}
}
if (aViewData.GetViewShell()->HasAccessibilityObjects())
aViewData.GetViewShell()->BroadcastAccessibility(SfxHint(SfxHintId::ScAccEnterEditMode));
}
void ScTabView::UpdateEditView()
{
if (aViewData.CurrentTabForData() != aViewData.GetRefTabNo() && ScModule::get()->IsFormulaMode())
return;
ScSplitPos eActive = aViewData.GetActivePart();
for (sal_uInt16 i = 0; i < 4; i++)
{
ScSplitPos eCurrent = ScSplitPos(i);
if (aViewData.HasEditView(eCurrent))
{
EditView* pEditView = aViewData.GetEditView(eCurrent);
tools::Long nRefTabNo = GetViewData().GetRefTabNo();
tools::Long nX = GetViewData().GetCurXForTab(nRefTabNo);
tools::Long nY = GetViewData().GetCurYForTab(nRefTabNo);
aViewData.SetEditEngine(eCurrent,
static_cast<ScEditEngineDefaulter&>(pEditView->getEditEngine()),
pGridWin[i], nX, nY );
if (eCurrent == eActive)
pEditView->ShowCursor( false );
}
}
RefeshTextEditOverlay();
}
void ScTabView::KillEditView( bool bNoPaint )
{
SCCOL nCol1 = aViewData.GetEditStartCol();
SCROW nRow1 = aViewData.GetEditStartRow();
SCCOL nCol2 = aViewData.GetEditEndCol();
SCROW nRow2 = aViewData.GetEditEndRow();
SCTAB nTab = aViewData.CurrentTabForData();
bool bPaint[4];
bool bNotifyAcc = false;
tools::Rectangle aRectangle[4];
bool bExtended = nRow1 != nRow2; // column is painted to the end anyway
bool bAtCursor = nCol1 <= aViewData.GetCurX() &&
nCol2 >= aViewData.GetCurX() &&
nRow1 == aViewData.GetCurY();
for (sal_uInt16 i = 0; i < 4; i++)
{
bPaint[i] = aViewData.HasEditView( static_cast<ScSplitPos>(i) );
if (bPaint[i])
{
bNotifyAcc = true;
EditView* pView = aViewData.GetEditView( static_cast<ScSplitPos>(i) );
aRectangle[i] = pView->GetInvalidateRect();
}
}
// this cleans up all used OverlayObjects for TextEdit, they get deleted
// and removed from the OverlayManager what makes them optically disappear
maTextEditOverlayGroup.clear();
// notify accessibility before all things happen
if (bNotifyAcc && aViewData.GetViewShell()->HasAccessibilityObjects())
aViewData.GetViewShell()->BroadcastAccessibility(SfxHint(SfxHintId::ScAccLeaveEditMode));
aViewData.ResetEditView();
for (sal_uInt16 i = 0; i < 4; i++)
{
if (pGridWin[i] && bPaint[i] && pGridWin[i]->IsVisible())
{
pGridWin[i]->ShowCursor();
pGridWin[i]->SetMapMode(pGridWin[i]->GetDrawMapMode());
const tools::Rectangle& rInvRect = aRectangle[i];
if (comphelper::LibreOfficeKit::isActive())
{
pGridWin[i]->LogicInvalidatePart(&rInvRect, nTab);
// invalidate other views
auto lInvalidateWindows =
[nTab, &rInvRect] (ScTabView* pTabView)
{
for (VclPtr<ScGridWindow> const & pWin: pTabView->pGridWin)
{
if (pWin)
pWin->LogicInvalidatePart(&rInvRect, nTab);
}
};
SfxLokHelper::forEachOtherView(GetViewData().GetViewShell(), lInvalidateWindows);
}
// #i73567# the cell still has to be repainted
else
{
const bool bDoPaint = bExtended || (bAtCursor && !bNoPaint);
const bool bDoInvalidate = !bDoPaint && bAtCursor;
if (bDoPaint)
{
pGridWin[i]->Draw( nCol1, nRow1, nCol2, nRow2, ScUpdateMode::All );
pGridWin[i]->UpdateSelectionOverlay();
}
else if (bDoInvalidate)
{
// tdf#162651 even if !bNoPaint is set, and there will be a
// follow up Draw of the next content, the area blanked out
// by the editview which is being removed still needs to be
// invalidated. The follow-up Draw of the content may be
// optimized to only redraw the area of cells where content
// has changed and will be unaware of what bounds this
// editview grew to during its editing cycle.
pGridWin[i]->Invalidate(rInvRect);
}
}
}
}
if (pDrawView)
DrawEnableAnim( true );
// GrabFocus always when this View is active and
// when the input row has the focus
bool bGrabFocus = false;
if (aViewData.IsActive())
{
ScInputHandler* pInputHdl = ScModule::get()->GetInputHdl();
if ( pInputHdl )
{
ScInputWindow* pInputWin = pInputHdl->GetInputWindow();
if (pInputWin && pInputWin->IsInputActive())
bGrabFocus = true;
}
}
if (bGrabFocus)
{
// should be done like this, so that Sfx notice it, but it does not work:
//! aViewData.CurrentTabForData()->GetViewFrame().GetWindow().GrabFocus();
// therefore first like this:
GetActiveWin()->GrabFocus();
}
// cursor query only after GrabFocus
for (sal_uInt16 i = 0; i < 4; i++)
{
if (pGridWin[i] && pGridWin[i]->IsVisible())
{
vcl::Cursor* pCur = pGridWin[i]->GetCursor();
if (pCur && pCur->IsVisible())
pCur->Hide();
if (bPaint[i])
{
pGridWin[i]->UpdateCursorOverlay();
pGridWin[i]->UpdateAutoFillOverlay();
}
}
}
}
void ScTabView::UpdateFormulas(SCCOL nStartCol, SCROW nStartRow, SCCOL nEndCol, SCROW nEndRow)
{
if ( aViewData.GetDocument().IsAutoCalcShellDisabled() )
return;
for (sal_uInt16 i = 0; i < 4; i++)
{
if (pGridWin[i] && pGridWin[i]->IsVisible())
pGridWin[i]->UpdateFormulas(nStartCol, nStartRow, nEndCol, nEndRow);
}
if ( aViewData.IsPagebreakMode() )
UpdatePageBreakData(); //! asynchronous
bool bIsTiledRendering = comphelper::LibreOfficeKit::isActive();
// UpdateHeaderWidth can fit the GridWindow widths to the frame, something
// we don't want in kit-mode where we try and match the GridWindow width
// to the tiled area separately
if (!bIsTiledRendering)
UpdateHeaderWidth();
// if in edit mode, adjust edit view area because widths/heights may have changed
if ( aViewData.HasEditView( aViewData.GetActivePart() ) )
UpdateEditView();
}
// PaintArea - repaint block
void ScTabView::PaintArea( SCCOL nStartCol, SCROW nStartRow, SCCOL nEndCol, SCROW nEndRow,
ScUpdateMode eMode, tools::Long nMaxWidthAffectedHintTwip )
{
SCCOL nCol1;
SCROW nRow1;
SCCOL nCol2;
SCROW nRow2;
bool bIsTiledRendering = comphelper::LibreOfficeKit::isActive();
ScDocument& rDoc = aViewData.GetDocument();
PutInOrder( nStartCol, nEndCol );
PutInOrder( nStartRow, nEndRow );
for (size_t i = 0; i < 4; ++i)
{
if (!pGridWin[i] || !pGridWin[i]->IsVisible())
continue;
ScHSplitPos eHWhich = WhichH( static_cast<ScSplitPos>(i) );
ScVSplitPos eVWhich = WhichV( static_cast<ScSplitPos>(i) );
bool bOut = false;
nCol1 = nStartCol;
nRow1 = nStartRow;
nCol2 = nEndCol;
nRow2 = nEndRow;
SCCOL nLastX = 0;
SCROW nLastY = 0;
if (bIsTiledRendering)
{
nLastX = aViewData.GetMaxTiledCol();
nLastY = aViewData.GetMaxTiledRow();
}
else
{
SCCOL nScrX = aViewData.GetPosX( eHWhich );
SCROW nScrY = aViewData.GetPosY( eVWhich );
if (nCol1 < nScrX)
nCol1 = nScrX;
if (nCol2 < nScrX)
{
if ( eMode == ScUpdateMode::All ) // for UPDATE_ALL, paint anyway
nCol2 = nScrX; // (because of extending strings to the right)
else
bOut = true; // completely outside the window
}
if (nRow1 < nScrY)
nRow1 = nScrY;
if (nRow2 < nScrY)
bOut = true;
nLastX = nScrX + aViewData.VisibleCellsX( eHWhich ) + 1;
nLastY = nScrY + aViewData.VisibleCellsY( eVWhich ) + 1;
}
if (nCol1 > nLastX)
bOut = true;
if (nCol2 > nLastX)
nCol2 = nLastX;
if (nRow1 > nLastY)
bOut = true;
if (nRow2 > nLastY)
nRow2 = nLastY;
if (bOut)
continue;
bool bLayoutRTL = aViewData.GetDocument().IsLayoutRTL( aViewData.CurrentTabForData() );
tools::Long nLayoutSign = (!bIsTiledRendering && bLayoutRTL) ? -1 : 1;
Point aStart = aViewData.GetScrPos( nCol1, nRow1, static_cast<ScSplitPos>(i) );
Point aEnd = aViewData.GetScrPos( nCol2+1, nRow2+1, static_cast<ScSplitPos>(i) );
if ( eMode == ScUpdateMode::All )
{
if (nMaxWidthAffectedHintTwip != -1)
{
tools::Long nMaxWidthAffectedHint = ScViewData::ToPixel(nMaxWidthAffectedHintTwip, aViewData.GetPPTX());
// If we know the max text width affected then just invalidate
// the max of the cell width and hint of affected cell width
// (where affected with is in terms of max width of optimal cell
// width for before/after change)
tools::Long nCellWidth = std::abs(aEnd.X() - aStart.X());
aEnd.setX(aStart.getX() + std::max(nCellWidth, nMaxWidthAffectedHint) * nLayoutSign);
}
else
{
if (bIsTiledRendering)
{
// When a cell content is deleted we have no clue about
// the width of the embedded text.
// Anyway, clients will ask only for tiles that overlaps
// the visible area.
// Remember that wsd expects int and that aEnd.X() is
// in pixels and will be converted in twips, before performing
// the lok callback, so we need to avoid that an overflow occurs.
aEnd.setX( std::numeric_limits<int>::max() / 1000 );
}
else
{
aEnd.setX( bLayoutRTL ? 0 : pGridWin[i]->GetOutputSizePixel().Width() );
}
}
}
aEnd.AdjustX( -nLayoutSign );
aEnd.AdjustY( -1 );
// #i85232# include area below cells (could be done in GetScrPos?)
if ( eMode == ScUpdateMode::All && nRow2 >= rDoc.MaxRow() && !bIsTiledRendering )
aEnd.setY( pGridWin[i]->GetOutputSizePixel().Height() );
aStart.AdjustX( -nLayoutSign ); // include change marks
aStart.AdjustY( -1 );
bool bMarkClipped = ScModule::get()->GetColorConfig().GetColorValue(svtools::CALCTEXTOVERFLOW).bIsVisible;
if (bMarkClipped)
{
// ScColumn::IsEmptyData has to be optimized for this
// (switch to Search() )
//!if ( nCol1 > 0 && !aViewData.GetDocument()->IsBlockEmpty(
//! 0, nRow1, nCol1-1, nRow2.
//! aViewData.CurrentTabForData() ) )
tools::Long nMarkPixel = static_cast<tools::Long>( SC_CLIPMARK_SIZE * aViewData.GetPPTX() );
aStart.AdjustX( -(nMarkPixel * nLayoutSign) );
}
pGridWin[i]->Invalidate( pGridWin[i]->PixelToLogic( tools::Rectangle( aStart,aEnd ) ) );
}
// #i79909# Calling UpdateAllOverlays here isn't necessary and would lead to overlay calls from a timer,
// with a wrong MapMode if editing in a cell (reference input).
// #i80499# Overlays need updates in a lot of cases, e.g. changing row/column size,
// or showing/hiding outlines. TODO: selections in inactive windows are vanishing.
// #i84689# With relative conditional formats, PaintArea may be called often (for each changed cell),
// so UpdateAllOverlays was moved to ScTabViewShell::Notify and is called only if PaintPartFlags::Left/PaintPartFlags::Top
// is set (width or height changed).
}
void ScTabView::PaintRangeFinderEntry (const ScRangeFindData* pData, const SCTAB nTab)
{
ScRange aRef = pData->aRef;
aRef.PutInOrder(); // PutInOrder for the queries below
if ( aRef.aStart == aRef.aEnd ) //! ignore sheet?
aViewData.GetDocument().ExtendMerge(aRef);
if (aRef.aStart.Tab() < nTab || aRef.aEnd.Tab() > nTab)
return;
SCCOL nCol1 = aRef.aStart.Col();
SCROW nRow1 = aRef.aStart.Row();
SCCOL nCol2 = aRef.aEnd.Col();
SCROW nRow2 = aRef.aEnd.Row();
// remove -> repaint
// ScUpdateMode::Marks: Invalidate, nothing until end of row
bool bHiddenEdge = false;
SCROW nTmp;
ScDocument& rDoc = aViewData.GetDocument();
while ( nCol1 > 0 && rDoc.ColHidden(nCol1, nTab) )
{
--nCol1;
bHiddenEdge = true;
}
while ( nCol2 < rDoc.MaxCol() && rDoc.ColHidden(nCol2, nTab) )
{
++nCol2;
bHiddenEdge = true;
}
nTmp = rDoc.LastVisibleRow(0, nRow1, nTab);
if (!rDoc.ValidRow(nTmp))
nTmp = 0;
if (nTmp < nRow1)
{
nRow1 = nTmp;
bHiddenEdge = true;
}
nTmp = rDoc.FirstVisibleRow(nRow2, rDoc.MaxRow(), nTab);
if (!rDoc.ValidRow(nTmp))
nTmp = rDoc.MaxRow();
if (nTmp > nRow2)
{
nRow2 = nTmp;
bHiddenEdge = true;
}
if ( nCol2 - nCol1 > 1 && nRow2 - nRow1 > 1 && !bHiddenEdge )
{
// only along the edges
PaintArea( nCol1, nRow1, nCol2, nRow1, ScUpdateMode::Marks );
PaintArea( nCol1, nRow1+1, nCol1, nRow2-1, ScUpdateMode::Marks );
PaintArea( nCol2, nRow1+1, nCol2, nRow2-1, ScUpdateMode::Marks );
PaintArea( nCol1, nRow2, nCol2, nRow2, ScUpdateMode::Marks );
}
else // all in one
PaintArea( nCol1, nRow1, nCol2, nRow2, ScUpdateMode::Marks );
}
void ScTabView::PaintRangeFinder( tools::Long nNumber )
{
ScInputHandler* pHdl = ScModule::get()->GetInputHdl(aViewData.GetViewShell());
if (!pHdl)
return;
ScRangeFindList* pRangeFinder = pHdl->GetRangeFindList();
if ( !(pRangeFinder && pRangeFinder->GetDocName() == aViewData.GetDocShell()->GetTitle()) )
return;
SCTAB nTab = aViewData.CurrentTabForData();
sal_uInt16 nCount = static_cast<sal_uInt16>(pRangeFinder->Count());
if (nNumber < 0)
{
for (sal_uInt16 i=0; i<nCount; i++)
PaintRangeFinderEntry(&pRangeFinder->GetObject(i),nTab);
}
else
{
sal_uInt16 idx = nNumber;
if (idx < nCount)
PaintRangeFinderEntry(&pRangeFinder->GetObject(idx),nTab);
}
}
// for chart data selection
void ScTabView::AddHighlightRange( const ScRange& rRange, const Color& rColor )
{
maHighlightRanges.emplace_back( rRange, rColor );
SCTAB nTab = aViewData.CurrentTabForData();
if ( nTab >= rRange.aStart.Tab() && nTab <= rRange.aEnd.Tab() )
PaintArea( rRange.aStart.Col(), rRange.aStart.Row(),
rRange.aEnd.Col(), rRange.aEnd.Row(), ScUpdateMode::Marks );
}
void ScTabView::ClearHighlightRanges()
{
SCTAB nTab = aViewData.CurrentTabForData();
for (ScHighlightEntry const & rEntry : maHighlightRanges)
{
ScRange aRange = rEntry.aRef;
if ( nTab >= aRange.aStart.Tab() && nTab <= aRange.aEnd.Tab() )
PaintArea( aRange.aStart.Col(), aRange.aStart.Row(),
aRange.aEnd.Col(), aRange.aEnd.Row(), ScUpdateMode::Marks );
}
maHighlightRanges.clear();
}
void ScTabView::DoChartSelection(
const uno::Sequence< chart2::data::HighlightedRange > & rHilightRanges )
{
ClearHighlightRanges();
const sal_Unicode sep = ::formula::FormulaCompiler::GetNativeSymbolChar(ocSep);
size_t nSize = 0;
size_t nIndex = 0;
std::vector<ReferenceMark> aReferenceMarks( nSize );
for (chart2::data::HighlightedRange const & rHighlightedRange : rHilightRanges)
{
Color aSelColor(ColorTransparency, rHighlightedRange.PreferredColor);
ScRangeList aRangeList;
ScDocument& rDoc = aViewData.GetDocShell()->GetDocument();
if( ScRangeStringConverter::GetRangeListFromString(
aRangeList, rHighlightedRange.RangeRepresentation, rDoc, rDoc.GetAddressConvention(), sep ))
{
size_t nListSize = aRangeList.size();
nSize += nListSize;
aReferenceMarks.resize(nSize);
for ( size_t j = 0; j < nListSize; ++j )
{
ScRange& p = aRangeList[j];
ScRange aTargetRange;
if( rHighlightedRange.Index == - 1 )
{
aTargetRange = p;
AddHighlightRange( aTargetRange, aSelColor );
}
else
{
aTargetRange = lcl_getSubRangeByIndex( p, rHighlightedRange.Index );
AddHighlightRange( aTargetRange, aSelColor );
}
if ( comphelper::LibreOfficeKit::isActive() && aViewData.GetViewShell() )
{
aTargetRange.PutInOrder();
tools::Long nX1 = aTargetRange.aStart.Col();
tools::Long nX2 = aTargetRange.aEnd.Col();
tools::Long nY1 = aTargetRange.aStart.Row();
tools::Long nY2 = aTargetRange.aEnd.Row();
tools::Long nTab = aTargetRange.aStart.Tab();
aReferenceMarks[nIndex++] = ScInputHandler::GetReferenceMark( aViewData, *aViewData.GetDocShell(),
nX1, nX2, nY1, nY2,
nTab, aSelColor );
}
}
}
}
if ( comphelper::LibreOfficeKit::isActive() && aViewData.GetViewShell() )
ScInputHandler::SendReferenceMarks( aViewData.GetViewShell(), aReferenceMarks );
}
void ScTabView::DoDPFieldPopup(std::u16string_view rPivotTableName, sal_Int32 nDimensionIndex, Point aPoint, Size aSize)
{
ScDocument& rDocument = aViewData.GetDocShell()->GetDocument();
ScGridWindow* pWin = pGridWin[aViewData.GetActivePart()].get();
if (!pWin)
return;
ScDPCollection* pDPCollection = rDocument.GetDPCollection();
ScDPObject* pDPObject = pDPCollection->GetByName(rPivotTableName);
if (!pDPObject)
return;
pDPObject->BuildAllDimensionMembers();
Point aPos = pWin->LogicToPixel(aPoint);
bool bLOK = comphelper::LibreOfficeKit::isActive();
Point aScreenPoint = bLOK ? aPos : pWin->OutputToScreenPixel(aPos);
Size aScreenSize = pWin->LogicToPixel(aSize);
pWin->DPLaunchFieldPopupMenu(aScreenPoint, aScreenSize, nDimensionIndex, pDPObject);
}
// PaintGrid - repaint data range
void ScTabView::PaintGrid()
{
for (sal_uInt16 i = 0; i < 4; i++)
{
if (pGridWin[i] && pGridWin[i]->IsVisible())
pGridWin[i]->Invalidate();
}
}
// PaintTop - repaint top control elements
void ScTabView::PaintTop()
{
for (sal_uInt16 i = 0; i < 2; i++)
{
if (pColBar[i])
pColBar[i]->Invalidate();
if (pColOutline[i])
pColOutline[i]->Invalidate();
}
}
void ScTabView::CreateAnchorHandles(SdrHdlList& rHdl, const ScAddress& rAddress)
{
for (sal_uInt16 i = 0; i < 4; i++)
{
if(pGridWin[i] && pGridWin[i]->IsVisible())
pGridWin[i]->CreateAnchorHandle(rHdl, rAddress);
}
}
void ScTabView::PaintTopArea( SCCOL nStartCol, SCCOL nEndCol )
{
// pixel position of the left edge
if ( nStartCol < aViewData.GetPosX(SC_SPLIT_LEFT) ||
nStartCol < aViewData.GetPosX(SC_SPLIT_RIGHT) )
aViewData.RecalcPixPos();
// adjust freeze (UpdateFixX resets HSplitPos)
if ( aViewData.GetHSplitMode() == SC_SPLIT_FIX && nStartCol < aViewData.GetFixPosX() )
if (aViewData.UpdateFixX())
RepeatResize();
// paint
if (nStartCol>0)
--nStartCol; //! general ?
ScDocument& rDoc = aViewData.GetDocument();
bool bLayoutRTL = rDoc.IsLayoutRTL( aViewData.CurrentTabForData() );
tools::Long nLayoutSign = bLayoutRTL ? -1 : 1;
for (sal_uInt16 i = 0; i < 2; i++)
{
ScHSplitPos eWhich = ScHSplitPos(i);
if (pColBar[eWhich])
{
Size aWinSize = pColBar[eWhich]->GetSizePixel();
tools::Long nStartX = aViewData.GetScrPos( nStartCol, 0, eWhich ).X();
tools::Long nEndX;
if (nEndCol >= rDoc.MaxCol())
nEndX = bLayoutRTL ? 0 : ( aWinSize.Width()-1 );
else
nEndX = aViewData.GetScrPos( nEndCol+1, 0, eWhich ).X() - nLayoutSign;
if (nStartX > nEndX)
std::swap(nStartX, nEndX);
pColBar[eWhich]->Invalidate(
tools::Rectangle( nStartX, 0, nEndX, aWinSize.Height()-1 ) );
}
if (pColOutline[eWhich])
pColOutline[eWhich]->Invalidate();
}
}
// PaintLeft - repaint left control elements
void ScTabView::PaintLeft()
{
for (sal_uInt16 i = 0; i < 2; i++)
{
if (pRowBar[i])
pRowBar[i]->Invalidate();
if (pRowOutline[i])
pRowOutline[i]->Invalidate();
}
}
void ScTabView::PaintLeftArea( SCROW nStartRow, SCROW nEndRow )
{
// pixel position of the upper edge
if ( nStartRow < aViewData.GetPosY(SC_SPLIT_TOP) ||
nStartRow < aViewData.GetPosY(SC_SPLIT_BOTTOM) )
aViewData.RecalcPixPos();
// adjust freeze (UpdateFixY reset VSplitPos)
if ( aViewData.GetVSplitMode() == SC_SPLIT_FIX && nStartRow < aViewData.GetFixPosY() )
if (aViewData.UpdateFixY())
RepeatResize();
// paint
if (nStartRow>0)
--nStartRow;
ScDocument& rDoc = aViewData.GetDocument();
for (sal_uInt16 i = 0; i < 2; i++)
{
ScVSplitPos eWhich = ScVSplitPos(i);
if (pRowBar[eWhich])
{
Size aWinSize = pRowBar[eWhich]->GetSizePixel();
tools::Long nStartY = aViewData.GetScrPos( 0, nStartRow, eWhich ).Y();
tools::Long nEndY;
if (nEndRow >= rDoc.MaxRow())
nEndY = aWinSize.Height() - 1;
else
nEndY = aViewData.GetScrPos( 0, nEndRow+1, eWhich ).Y() - 1;
if (nStartY > nEndY)
std::swap(nStartY, nEndY);
pRowBar[eWhich]->Invalidate(
tools::Rectangle( 0, nStartY, aWinSize.Width()-1, nEndY ) );
}
if (pRowOutline[eWhich])
pRowOutline[eWhich]->Invalidate();
}
}
bool ScTabView::PaintExtras()
{
bool bRet = false;
ScDocument& rDoc = aViewData.GetDocument();
SCTAB nTab = aViewData.CurrentTabForData();
if (!rDoc.HasTable(nTab)) // sheet is deleted?
{
SCTAB nCount = rDoc.GetTableCount();
aViewData.SetTabNo(nCount-1);
bRet = true;
}
pTabControl->UpdateStatus(); // true = active
return bRet;
}
void ScTabView::RecalcPPT()
{
// called after changes that require the PPT values to be recalculated
// (currently from detective operations)
double nOldX = aViewData.GetPPTX();
double nOldY = aViewData.GetPPTY();
aViewData.RefreshZoom(); // pre-calculate new PPT values
bool bChangedX = ( aViewData.GetPPTX() != nOldX );
bool bChangedY = ( aViewData.GetPPTY() != nOldY );
if ( !(bChangedX || bChangedY) )
return;
// call view SetZoom (including draw scale, split update etc)
// and paint only if values changed
Fraction aZoomX = aViewData.GetZoomX();
Fraction aZoomY = aViewData.GetZoomY();
SetZoom( aZoomX, aZoomY, false );
PaintGrid();
if (bChangedX)
PaintTop();
if (bChangedY)
PaintLeft();
}
void ScTabView::ActivateView( bool bActivate, bool bFirst )
{
if ( bActivate == aViewData.IsActive() && !bFirst )
{
// no assertion anymore - occurs when previously in Drag&Drop switching over
// to another document
return;
}
// is only called for MDI-(De)Activate
// aViewData.Activate behind due to cursor show for KillEditView
// don't delete selection - if Activate(false) is set in ViewData,
// then the selection is not displayed
if (!bActivate)
{
ScModule* pScMod = ScModule::get();
bool bRefMode = pScMod->IsFormulaMode();
// don't cancel reference input, to allow reference
// to other document
if (!bRefMode)
{
// pass view to GetInputHdl, this view may not be current anymore
ScInputHandler* pHdl = pScMod->GetInputHdl(aViewData.GetViewShell());
if (pHdl)
pHdl->EnterHandler();
}
}
PaintExtras();
aViewData.Activate(bActivate);
PaintBlock(false); // repaint, selection after active status
if (!bActivate)
HideAllCursors(); // Cursor
else if (!bFirst)
ShowAllCursors();
if (bActivate)
{
if ( bFirst )
{
ScSplitPos eWin = aViewData.GetActivePart();
OSL_ENSURE( pGridWin[eWin], "Corrupted document, not all SplitPos in GridWin" );
if ( !pGridWin[eWin] )
{
eWin = SC_SPLIT_BOTTOMLEFT;
if ( !pGridWin[eWin] )
{
short i;
for ( i=0; i<4; i++ )
{
if ( pGridWin[i] )
{
eWin = static_cast<ScSplitPos>(i);
break; // for
}
}
OSL_ENSURE( i<4, "and BOOM" );
}
aViewData.SetActivePart( eWin );
}
}
// do not call GrabFocus from here!
// if the document is processed, then Sfx calls GrabFocus in the window of the shell.
// if it is a mail body for instance, then it can't get the focus
UpdateInputContext();
}
else
pGridWin[aViewData.GetActivePart()]->ClickExtern();
}
void ScTabView::ActivatePart( ScSplitPos eWhich )
{
ScSplitPos eOld = aViewData.GetActivePart();
if ( eOld == eWhich )
return;
bInActivatePart = true;
bool bRefMode = ScModule::get()->IsFormulaMode();
// the HasEditView call during SetCursor would fail otherwise
if ( aViewData.HasEditView(eOld) && !bRefMode )
UpdateInputLine();
ScHSplitPos eOldH = WhichH(eOld);
ScVSplitPos eOldV = WhichV(eOld);
ScHSplitPos eNewH = WhichH(eWhich);
ScVSplitPos eNewV = WhichV(eWhich);
bool bTopCap = pColBar[eOldH] && pColBar[eOldH]->IsMouseCaptured();
bool bLeftCap = pRowBar[eOldV] && pRowBar[eOldV]->IsMouseCaptured();
bool bFocus = pGridWin[eOld]->HasFocus();
bool bCapture = pGridWin[eOld]->IsMouseCaptured();
if (bCapture)
pGridWin[eOld]->ReleaseMouse();
pGridWin[eOld]->ClickExtern();
pGridWin[eOld]->HideCursor();
pGridWin[eWhich]->HideCursor();
aViewData.SetActivePart( eWhich );
ScTabViewShell* pShell = aViewData.GetViewShell();
pShell->WindowChanged();
pSelEngine->SetWindow(pGridWin[eWhich]);
pSelEngine->SetWhich(eWhich);
pSelEngine->SetVisibleArea( tools::Rectangle(Point(), pGridWin[eWhich]->GetOutputSizePixel()) );
pGridWin[eOld]->MoveMouseStatus(*pGridWin[eWhich]);
if ( bCapture || pGridWin[eWhich]->IsMouseCaptured() )
{
// tracking instead of CaptureMouse, so it can be cancelled cleanly
// (SelectionEngine calls CaptureMouse for SetWindow)
//! someday SelectionEngine itself should call StartTracking!?!
pGridWin[eWhich]->ReleaseMouse();
pGridWin[eWhich]->StartTracking();
}
if ( bTopCap && pColBar[eNewH] )
{
pColBar[eOldH]->SetIgnoreMove(true);
pColBar[eNewH]->SetIgnoreMove(false);
pHdrSelEng->SetWindow( pColBar[eNewH] );
tools::Long nWidth = pColBar[eNewH]->GetOutputSizePixel().Width();
pHdrSelEng->SetVisibleArea( tools::Rectangle( 0, LONG_MIN, nWidth-1, LONG_MAX ) );
pColBar[eNewH]->CaptureMouse();
}
if ( bLeftCap && pRowBar[eNewV] )
{
pRowBar[eOldV]->SetIgnoreMove(true);
pRowBar[eNewV]->SetIgnoreMove(false);
pHdrSelEng->SetWindow( pRowBar[eNewV] );
tools::Long nHeight = pRowBar[eNewV]->GetOutputSizePixel().Height();
pHdrSelEng->SetVisibleArea( tools::Rectangle( LONG_MIN, 0, LONG_MAX, nHeight-1 ) );
pRowBar[eNewV]->CaptureMouse();
}
aHdrFunc.SetWhich(eWhich);
pGridWin[eOld]->ShowCursor();
pGridWin[eWhich]->ShowCursor();
SfxInPlaceClient* pClient = aViewData.GetViewShell()->GetIPClient();
bool bOleActive = ( pClient && pClient->IsObjectInPlaceActive() );
// don't switch ViewShell's active window during RefInput, because the focus
// might change, and subsequent SetReference calls wouldn't find the right EditView
if ( !bRefMode && !bOleActive )
aViewData.GetViewShell()->SetWindow( pGridWin[eWhich] );
if ( bFocus && !aViewData.IsAnyFillMode() && !bRefMode )
{
// GrabFocus only if previously the other GridWindow had the focus
// (for instance due to search and replace)
pGridWin[eWhich]->GrabFocus();
}
bInActivatePart = false;
}
void ScTabView::HideListBox()
{
for (VclPtr<ScGridWindow> & pWin : pGridWin)
{
if (pWin)
pWin->ClickExtern();
}
}
void ScTabView::UpdateInputContext()
{
ScGridWindow* pWin = pGridWin[aViewData.GetActivePart()].get();
if (pWin)
pWin->UpdateInputContext();
if (pTabControl)
pTabControl->UpdateInputContext();
}
// GetGridWidth - width of an output range (for ViewData)
tools::Long ScTabView::GetGridWidth( ScHSplitPos eWhich )
{
// at present only the size of the current pane is synchronized with
// the size of the visible area in Online;
// as a workaround we use the same width for all panes independently
// from the eWhich value
if (comphelper::LibreOfficeKit::isActive())
{
ScGridWindow* pGridWindow = aViewData.GetActiveWin();
if (pGridWindow)
return pGridWindow->GetSizePixel().Width();
}
ScSplitPos eGridWhich = ( eWhich == SC_SPLIT_LEFT ) ? SC_SPLIT_BOTTOMLEFT : SC_SPLIT_BOTTOMRIGHT;
if (pGridWin[eGridWhich])
return pGridWin[eGridWhich]->GetSizePixel().Width();
else
return 0;
}
// GetGridHeight - height of an output range (for ViewData)
tools::Long ScTabView::GetGridHeight( ScVSplitPos eWhich )
{
// at present only the size of the current pane is synchronized with
// the size of the visible area in Online;
// as a workaround we use the same height for all panes independently
// from the eWhich value
if (comphelper::LibreOfficeKit::isActive())
{
ScGridWindow* pGridWindow = aViewData.GetActiveWin();
if (pGridWindow)
return pGridWindow->GetSizePixel().Height();
}
ScSplitPos eGridWhich = ( eWhich == SC_SPLIT_TOP ) ? SC_SPLIT_TOPLEFT : SC_SPLIT_BOTTOMLEFT;
if (pGridWin[eGridWhich])
return pGridWin[eGridWhich]->GetSizePixel().Height();
else
return 0;
}
void ScTabView::UpdateInputLine()
{
ScModule::get()->InputEnterHandler();
}
void ScTabView::SyncGridWindowMapModeFromDrawMapMode()
{
// AW: Discussed with NN if there is a reason that new map mode was only set for one window,
// but is not. Setting only on one window causes the first repaint to have the old mapMode
// in three of four views, so the overlay will save the wrong content e.g. when zooming out.
// Changing to setting map mode at all windows.
for (VclPtr<ScGridWindow> & pWin : pGridWin)
{
if (!pWin)
continue;
pWin->SetMapMode(pWin->GetDrawMapMode());
}
}
void ScTabView::ZoomChanged()
{
ScInputHandler* pHdl = ScModule::get()->GetInputHdl(aViewData.GetViewShell());
if (pHdl)
pHdl->SetRefScale( aViewData.GetZoomX(), aViewData.GetZoomY() );
UpdateFixPos();
UpdateScrollBars();
SyncGridWindowMapModeFromDrawMapMode();
// VisArea...
SetNewVisArea();
InterpretVisible(); // have everything calculated before painting
SfxBindings& rBindings = aViewData.GetBindings();
rBindings.Invalidate( SID_ATTR_ZOOM );
rBindings.Invalidate( SID_ATTR_ZOOMSLIDER );
rBindings.Invalidate(SID_ZOOM_IN);
rBindings.Invalidate(SID_ZOOM_OUT);
HideNoteOverlay();
// To not change too much, use pWin here
ScGridWindow* pWin = pGridWin[aViewData.GetActivePart()].get();
if ( pWin && aViewData.HasEditView( aViewData.GetActivePart() ) )
{
// make sure the EditView's position and size are updated
// with the right (logic, not drawing) MapMode
pWin->SetMapMode( aViewData.GetLogicMode() );
UpdateEditView();
}
}
void ScTabView::CheckNeedsRepaint()
{
for (sal_uInt16 i = 0; i < 4; i++)
{
if (pGridWin[i] && pGridWin[i]->IsVisible())
pGridWin[i]->CheckNeedsRepaint();
}
}
bool ScTabView::NeedsRepaint()
{
for (VclPtr<ScGridWindow> & pWin : pGridWin)
{
if (pWin && pWin->IsVisible() && pWin->NeedsRepaint())
return true;
}
return false;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V595 The 'pDocSh' pointer was utilized before it was verified against nullptr. Check lines: 425, 440.