/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <svx/svddef.hxx>
#include <svx/sdasitm.hxx>
#include <svx/sdtditm.hxx>
#include <svx/sdtagitm.hxx>
#include <svx/sdtaitm.hxx>
#include <svx/sdtfsitm.hxx>
#include <svx/sdtcfitm.hxx>
#include <svx/svxids.hrc>
#include <textattr.hxx>
#include <svx/dlgutil.hxx>
#include <editeng/writingmodeitem.hxx>
#include <svtools/unitconv.hxx>
#include <osl/diagnose.h>
using namespace ::com::sun::star;
const WhichRangesContainer SvxTextAttrPage::pRanges(
svl::Items<
SDRATTR_MISC_FIRST ,SDRATTR_TEXT_HORZADJUST,
SDRATTR_TEXT_WORDWRAP, SDRATTR_TEXT_WORDWRAP
>);
/*************************************************************************
|*
|* dialog (page) for copying objects
|*
\************************************************************************/
SvxTextAttrPage::SvxTextAttrPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
: SvxTabPage(pPage, pController, u"cui/ui/textattrtabpage.ui"_ustr, u"TextAttributesPage"_ustr, rInAttrs)
, rOutAttrs(rInAttrs)
, m_eObjKind(SdrObjKind::NONE)
, bAutoGrowSizeEnabled(false)
, bContourEnabled(false)
, bAutoGrowWidthEnabled(false)
, bAutoGrowHeightEnabled(false)
, bWordWrapTextEnabled(false)
, bFitToSizeEnabled(false)
, m_aCtlPosition(this)
, m_xDrawingText(m_xBuilder->weld_widget(u"drawingtext"_ustr))
, m_xCustomShapeText(m_xBuilder->weld_widget(u"customshapetext"_ustr))
, m_xTsbAutoGrowWidth(m_xBuilder->weld_check_button(u"TSB_AUTOGROW_WIDTH"_ustr))
, m_xTsbAutoGrowHeight(m_xBuilder->weld_check_button(u"TSB_AUTOGROW_HEIGHT"_ustr))
, m_xTsbFitToSize(m_xBuilder->weld_check_button(u"TSB_FIT_TO_SIZE"_ustr))
, m_xTsbContour(m_xBuilder->weld_check_button(u"TSB_CONTOUR"_ustr))
, m_xTsbWordWrapText(m_xBuilder->weld_check_button(u"TSB_WORDWRAP_TEXT"_ustr))
, m_xTsbAutoGrowSize(m_xBuilder->weld_check_button(u"TSB_AUTOGROW_SIZE"_ustr))
, m_xFlDistance(m_xBuilder->weld_frame(u"FL_DISTANCE"_ustr))
, m_xMtrFldLeft(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_LEFT"_ustr, FieldUnit::CM))
, m_xMtrFldRight(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_RIGHT"_ustr, FieldUnit::CM))
, m_xMtrFldTop(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_TOP"_ustr, FieldUnit::CM))
, m_xMtrFldBottom(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_BOTTOM"_ustr, FieldUnit::CM))
, m_xFlPosition(m_xBuilder->weld_frame(u"FL_POSITION"_ustr))
, m_xCtlPosition(new weld::CustomWeld(*m_xBuilder, u"CTL_POSITION"_ustr, m_aCtlPosition))
, m_xTsbFullWidth(m_xBuilder->weld_check_button(u"TSB_FULL_WIDTH"_ustr))
{
m_aCtlPosition.SetControlSettings(RectPoint::MM, 240);
FieldUnit eFUnit = GetModuleFieldUnit( rInAttrs );
SetFieldUnit( *m_xMtrFldLeft, eFUnit );
SetFieldUnit( *m_xMtrFldRight, eFUnit );
SetFieldUnit( *m_xMtrFldTop, eFUnit );
SetFieldUnit( *m_xMtrFldBottom, eFUnit );
Link<weld::Toggleable&,void> aLink( LINK( this, SvxTextAttrPage, ClickHdl_Impl ) );
m_xTsbAutoGrowWidth->connect_toggled( aLink );
m_xTsbAutoGrowHeight->connect_toggled( aLink );
m_xTsbAutoGrowSize->connect_toggled( aLink );
m_xTsbFitToSize->connect_toggled( aLink );
m_xTsbContour->connect_toggled( aLink );
m_xTsbFullWidth->connect_toggled(LINK( this, SvxTextAttrPage, ClickFullWidthHdl_Impl ) );
}
SvxTextAttrPage::~SvxTextAttrPage()
{
}
/*************************************************************************
|*
|* reads the passed item set
|*
\************************************************************************/
void SvxTextAttrPage::Reset( const SfxItemSet* rAttrs )
{
SfxItemPool* pPool = rAttrs->GetPool();
DBG_ASSERT( pPool, "Where is the pool?" );
MapUnit eUnit = pPool->GetMetric( SDRATTR_TEXT_LEFTDIST );
const SdrMetricItem* pItem = GetItem(*rAttrs, SDRATTR_TEXT_LEFTDIST);
if( !pItem )
pItem = &pPool->GetUserOrPoolDefaultItem( SDRATTR_TEXT_LEFTDIST );
SetMetricValue(*m_xMtrFldLeft, pItem->GetValue(), eUnit);
m_xMtrFldLeft->save_value();
pItem = GetItem( *rAttrs, SDRATTR_TEXT_RIGHTDIST );
if( !pItem )
pItem = &pPool->GetUserOrPoolDefaultItem( SDRATTR_TEXT_RIGHTDIST );
SetMetricValue(*m_xMtrFldRight, pItem->GetValue(), eUnit);
m_xMtrFldRight->save_value();
pItem = GetItem( *rAttrs, SDRATTR_TEXT_UPPERDIST );
if( !pItem )
pItem = &pPool->GetUserOrPoolDefaultItem( SDRATTR_TEXT_UPPERDIST );
SetMetricValue(*m_xMtrFldTop, pItem->GetValue(), eUnit);
m_xMtrFldTop->save_value();
pItem = GetItem( *rAttrs, SDRATTR_TEXT_LOWERDIST );
if( !pItem )
pItem = &pPool->GetUserOrPoolDefaultItem( SDRATTR_TEXT_LOWERDIST );
SetMetricValue(*m_xMtrFldBottom, pItem->GetValue(), eUnit);
m_xMtrFldBottom->save_value();
// adjust to height and autogrowsize
if ( rAttrs->GetItemState( SDRATTR_TEXT_AUTOGROWHEIGHT ) != SfxItemState::INVALID )
{
m_xTsbAutoGrowHeight->set_state( rAttrs->Get( SDRATTR_TEXT_AUTOGROWHEIGHT ).
GetValue() ? TRISTATE_TRUE : TRISTATE_FALSE );
m_xTsbAutoGrowSize->set_state( rAttrs->Get( SDRATTR_TEXT_AUTOGROWHEIGHT ).
GetValue() ? TRISTATE_TRUE : TRISTATE_FALSE );
}
else
{
m_xTsbAutoGrowHeight->set_state( TRISTATE_INDET );
m_xTsbAutoGrowSize->set_state( TRISTATE_INDET );
}
m_xTsbAutoGrowHeight->save_state();
m_xTsbAutoGrowSize->save_state();
// adjust to width
if ( rAttrs->GetItemState( SDRATTR_TEXT_AUTOGROWWIDTH ) != SfxItemState::INVALID )
{
m_xTsbAutoGrowWidth->set_state( rAttrs->Get( SDRATTR_TEXT_AUTOGROWWIDTH ).
GetValue() ? TRISTATE_TRUE : TRISTATE_FALSE );
}
else
m_xTsbAutoGrowWidth->set_state( TRISTATE_INDET );
m_xTsbAutoGrowWidth->save_state();
// wordwrap text
if ( rAttrs->GetItemState( SDRATTR_TEXT_WORDWRAP ) != SfxItemState::INVALID )
{
m_xTsbWordWrapText->set_state( rAttrs->Get( SDRATTR_TEXT_WORDWRAP ).
GetValue() ? TRISTATE_TRUE : TRISTATE_FALSE );
}
else
m_xTsbWordWrapText->set_state( TRISTATE_INDET );
m_xTsbWordWrapText->save_state();
// #103516# Do the setup based on states of hor/ver adjust
// Setup center field and FullWidth
SfxItemState eVState = rAttrs->GetItemState( SDRATTR_TEXT_VERTADJUST );
SfxItemState eHState = rAttrs->GetItemState( SDRATTR_TEXT_HORZADJUST );
if(SfxItemState::INVALID != eVState && SfxItemState::INVALID != eHState)
{
// VertAdjust and HorAdjust are unequivocal, thus
SdrTextVertAdjust eTVA = rAttrs->Get(SDRATTR_TEXT_VERTADJUST).GetValue();
SdrTextHorzAdjust eTHA = rAttrs->Get(SDRATTR_TEXT_HORZADJUST).GetValue();
RectPoint eRP = RectPoint::LB;
if (m_xTsbFullWidth->get_state() == TRISTATE_INDET)
m_xTsbFullWidth->set_state(TRISTATE_FALSE);
// Translate item values into local anchor position.
switch (eTVA)
{
case SDRTEXTVERTADJUST_TOP:
{
switch (eTHA)
{
case SDRTEXTHORZADJUST_LEFT: eRP = RectPoint::LT; break;
case SDRTEXTHORZADJUST_BLOCK:
case SDRTEXTHORZADJUST_CENTER: eRP = RectPoint::MT; break;
case SDRTEXTHORZADJUST_RIGHT: eRP = RectPoint::RT; break;
}
break;
}
case SDRTEXTVERTADJUST_BLOCK:
case SDRTEXTVERTADJUST_CENTER:
{
switch (eTHA)
{
case SDRTEXTHORZADJUST_LEFT: eRP = RectPoint::LM; break;
case SDRTEXTHORZADJUST_BLOCK:
case SDRTEXTHORZADJUST_CENTER: eRP = RectPoint::MM; break;
case SDRTEXTHORZADJUST_RIGHT: eRP = RectPoint::RM; break;
}
break;
}
case SDRTEXTVERTADJUST_BOTTOM:
{
switch (eTHA)
{
case SDRTEXTHORZADJUST_LEFT: eRP = RectPoint::LB; break;
case SDRTEXTHORZADJUST_BLOCK:
case SDRTEXTHORZADJUST_CENTER: eRP = RectPoint::MB; break;
case SDRTEXTHORZADJUST_RIGHT: eRP = RectPoint::RB; break;
}
break;
}
default:
break;
}
// See if we have to check the "full width" check button.
bool bLeftToRight(IsTextDirectionLeftToRight());
if((bLeftToRight && (SDRTEXTHORZADJUST_BLOCK == eTHA)) || (!bLeftToRight && (SDRTEXTVERTADJUST_BLOCK == eTVA)))
{
// Move anchor to valid position.
ClickFullWidthHdl_Impl(*m_xTsbFullWidth);
m_xTsbFullWidth->set_state(TRISTATE_TRUE);
}
m_aCtlPosition.SetActualRP( eRP );
}
else
{
// VertAdjust or HorAdjust is not unequivocal
m_aCtlPosition.Reset();
m_aCtlPosition.SetState(CTL_STATE::NOVERT);
m_aCtlPosition.DoCompletelyDisable(true);
m_xTsbFullWidth->set_state(TRISTATE_INDET);
m_xFlPosition->set_sensitive( false );
}
// adjust to border
if (rAttrs->GetItemState(SDRATTR_TEXT_FITTOSIZE) != SfxItemState::INVALID)
{
drawing::TextFitToSizeType const eFTS =
rAttrs->Get( SDRATTR_TEXT_FITTOSIZE ).GetValue();
if (eFTS == drawing::TextFitToSizeType_AUTOFIT || eFTS == drawing::TextFitToSizeType_NONE)
m_xTsbFitToSize->set_state( TRISTATE_FALSE );
else
m_xTsbFitToSize->set_state( TRISTATE_TRUE );
}
else
m_xTsbFitToSize->set_state( TRISTATE_INDET );
m_xTsbFitToSize->save_state();
if( rAttrs->GetItemState( SDRATTR_TEXT_CONTOURFRAME ) != SfxItemState::INVALID )
{
bool bContour = rAttrs->Get( SDRATTR_TEXT_CONTOURFRAME ).GetValue();
m_xTsbContour->set_state( bContour ? TRISTATE_TRUE : TRISTATE_FALSE );
}
else
m_xTsbContour->set_state( TRISTATE_INDET );
m_xTsbContour->save_state();
ClickHdl_Impl(*m_xTsbContour);
}
/*************************************************************************
|*
|* fills the passed item set with dialog box attributes
|*
\************************************************************************/
bool SvxTextAttrPage::FillItemSet( SfxItemSet* rAttrs)
{
SfxItemPool* pPool = rAttrs->GetPool();
DBG_ASSERT( pPool, "Where is the pool?" );
MapUnit eUnit = pPool->GetMetric( SDRATTR_TEXT_LEFTDIST );
sal_Int32 nValue;
TriState eState;
if( m_xMtrFldLeft->get_value_changed_from_saved() )
{
nValue = GetCoreValue( *m_xMtrFldLeft, eUnit );
rAttrs->Put( makeSdrTextLeftDistItem( nValue ) );
}
if( m_xMtrFldRight->get_value_changed_from_saved() )
{
nValue = GetCoreValue( *m_xMtrFldRight, eUnit );
rAttrs->Put( makeSdrTextRightDistItem( nValue ) );
}
if( m_xMtrFldTop->get_value_changed_from_saved() )
{
nValue = GetCoreValue( *m_xMtrFldTop, eUnit );
rAttrs->Put( makeSdrTextUpperDistItem( nValue ) );
}
if( m_xMtrFldBottom->get_value_changed_from_saved() )
{
nValue = GetCoreValue( *m_xMtrFldBottom, eUnit );
rAttrs->Put( makeSdrTextLowerDistItem( nValue ) );
}
eState = m_xTsbAutoGrowHeight->get_state();
if( m_xTsbAutoGrowHeight->get_state_changed_from_saved() )
{
rAttrs->Put( makeSdrTextAutoGrowHeightItem( TRISTATE_TRUE == eState ) );
}
eState = m_xTsbAutoGrowWidth->get_state();
if( m_xTsbAutoGrowWidth->get_state_changed_from_saved() )
{
rAttrs->Put( makeSdrTextAutoGrowWidthItem( TRISTATE_TRUE == eState ) );
}
eState = m_xTsbAutoGrowSize->get_state();
if( m_xTsbAutoGrowSize->get_state_changed_from_saved() )
{
rAttrs->Put( makeSdrTextAutoGrowHeightItem( TRISTATE_TRUE == eState ) );
}
eState = m_xTsbWordWrapText->get_state();
if( m_xTsbWordWrapText->get_state_changed_from_saved() )
{
rAttrs->Put( makeSdrTextWordWrapItem( TRISTATE_TRUE == eState ) );
}
eState = m_xTsbContour->get_state();
if( m_xTsbContour->get_state_changed_from_saved() )
{
rAttrs->Put( makeSdrTextContourFrameItem( TRISTATE_TRUE == eState ) );
}
eState = m_xTsbFitToSize->get_state();
if( m_xTsbFitToSize->get_state_changed_from_saved() )
{
drawing::TextFitToSizeType eFTS;
switch( eState )
{
default: ; //prevent warning
OSL_FAIL( "svx::SvxTextAttrPage::FillItemSet(), unhandled state!" );
[[fallthrough]];
case TRISTATE_FALSE: eFTS = drawing::TextFitToSizeType_AUTOFIT; break;
case TRISTATE_TRUE: eFTS = drawing::TextFitToSizeType_PROPORTIONAL; break;
}
rAttrs->Put( SdrTextFitToSizeTypeItem( eFTS ) );
}
// centered
RectPoint eRP = m_aCtlPosition.GetActualRP();
SdrTextVertAdjust eTVA;
SdrTextHorzAdjust eTHA;
switch( eRP )
{
default:
case RectPoint::LT: eTVA = SDRTEXTVERTADJUST_TOP;
eTHA = SDRTEXTHORZADJUST_LEFT; break;
case RectPoint::LM: eTVA = SDRTEXTVERTADJUST_CENTER;
eTHA = SDRTEXTHORZADJUST_LEFT; break;
case RectPoint::LB: eTVA = SDRTEXTVERTADJUST_BOTTOM;
eTHA = SDRTEXTHORZADJUST_LEFT; break;
case RectPoint::MT: eTVA = SDRTEXTVERTADJUST_TOP;
eTHA = SDRTEXTHORZADJUST_CENTER; break;
case RectPoint::MM: eTVA = SDRTEXTVERTADJUST_CENTER;
eTHA = SDRTEXTHORZADJUST_CENTER; break;
case RectPoint::MB: eTVA = SDRTEXTVERTADJUST_BOTTOM;
eTHA = SDRTEXTHORZADJUST_CENTER; break;
case RectPoint::RT: eTVA = SDRTEXTVERTADJUST_TOP;
eTHA = SDRTEXTHORZADJUST_RIGHT; break;
case RectPoint::RM: eTVA = SDRTEXTVERTADJUST_CENTER;
eTHA = SDRTEXTHORZADJUST_RIGHT; break;
case RectPoint::RB: eTVA = SDRTEXTVERTADJUST_BOTTOM;
eTHA = SDRTEXTHORZADJUST_RIGHT; break;
}
// #103516# Do not change values if adjust controls were disabled.
bool bIsDisabled(m_aCtlPosition.IsCompletelyDisabled());
if(bIsDisabled)
return true;
if( m_xTsbFullWidth->get_state() == TRISTATE_TRUE )
{
if (IsTextDirectionLeftToRight())
eTHA = SDRTEXTHORZADJUST_BLOCK;
else
eTVA = SDRTEXTVERTADJUST_BLOCK;
}
if ( rOutAttrs.GetItemState( SDRATTR_TEXT_VERTADJUST ) != SfxItemState::INVALID )
{
SdrTextVertAdjust eOldTVA = rOutAttrs.Get( SDRATTR_TEXT_VERTADJUST ).GetValue();
if( eOldTVA != eTVA )
rAttrs->Put( SdrTextVertAdjustItem( eTVA ) );
}
else
rAttrs->Put( SdrTextVertAdjustItem( eTVA ) );
if ( rOutAttrs.GetItemState( SDRATTR_TEXT_HORZADJUST ) != SfxItemState::INVALID )
{
SdrTextHorzAdjust eOldTHA = rOutAttrs.Get( SDRATTR_TEXT_HORZADJUST ).GetValue();
if( eOldTHA != eTHA )
rAttrs->Put( SdrTextHorzAdjustItem( eTHA ) );
}
else
rAttrs->Put( SdrTextHorzAdjustItem( eTHA ) );
return true;
}
void SvxTextAttrPage::Construct()
{
switch (m_eObjKind)
{
case SdrObjKind::NONE:
// indeterminate, show them all
bFitToSizeEnabled = bContourEnabled = bWordWrapTextEnabled =
bAutoGrowSizeEnabled = bAutoGrowWidthEnabled = bAutoGrowHeightEnabled = true;
m_xCustomShapeText->show();
m_xDrawingText->show();
break;
case SdrObjKind::Text:
case SdrObjKind::TitleText:
case SdrObjKind::OutlineText:
case SdrObjKind::Caption:
// contour NOT possible for pure text objects
bContourEnabled = bWordWrapTextEnabled = bAutoGrowSizeEnabled = false;
// adjusting width and height is ONLY possible for pure text objects
bFitToSizeEnabled = bAutoGrowWidthEnabled = bAutoGrowHeightEnabled = true;
m_xCustomShapeText->hide();
m_xDrawingText->show();
break;
case SdrObjKind::CustomShape:
bFitToSizeEnabled = bContourEnabled = bAutoGrowWidthEnabled = bAutoGrowHeightEnabled = false;
bWordWrapTextEnabled = bAutoGrowSizeEnabled = true;
m_xDrawingText->hide();
m_xCustomShapeText->show();
break;
default:
bFitToSizeEnabled = bContourEnabled = true;
bWordWrapTextEnabled = bAutoGrowSizeEnabled = bAutoGrowWidthEnabled = bAutoGrowHeightEnabled = false;
m_xCustomShapeText->hide();
m_xDrawingText->show();
break;
}
m_xTsbAutoGrowHeight->set_visible( bAutoGrowHeightEnabled );
m_xTsbAutoGrowWidth->set_visible( bAutoGrowWidthEnabled );
m_xTsbFitToSize->set_visible( bFitToSizeEnabled );
m_xTsbContour->set_visible( bContourEnabled );
m_xTsbAutoGrowSize->set_visible( bAutoGrowSizeEnabled );
m_xTsbWordWrapText->set_visible( bWordWrapTextEnabled );
}
std::unique_ptr<SfxTabPage> SvxTextAttrPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rAttrs)
{
return std::make_unique<SvxTextAttrPage>(pPage, pController, *rAttrs);
}
/** Check whether we have to uncheck the "Full width" check box.
*/
void SvxTextAttrPage::PointChanged(weld::DrawingArea*, RectPoint eRP)
{
if (m_xTsbFullWidth->get_state() != TRISTATE_TRUE)
return;
// Depending on write direction and currently checked anchor we have
// to uncheck the "full width" button.
if (IsTextDirectionLeftToRight())
switch( eRP )
{
case RectPoint::LT:
case RectPoint::LM:
case RectPoint::LB:
case RectPoint::RT:
case RectPoint::RM:
case RectPoint::RB:
m_xTsbFullWidth->set_state( TRISTATE_FALSE );
break;
default: ;//prevent warning
}
else
switch (eRP)
{
case RectPoint::LT:
case RectPoint::MT:
case RectPoint::RT:
case RectPoint::LB:
case RectPoint::MB:
case RectPoint::RB:
m_xTsbFullWidth->set_state( TRISTATE_FALSE );
break;
default: ;//prevent warning
}
}
/*************************************************************************
|*
|* possibly changes the position of the position-control
|*
\************************************************************************/
/** When switching the "full width" check button on the text anchor may have
to be moved to a valid and adjacent position. This position depends on
the current anchor position and the text writing direction.
*/
IMPL_LINK_NOARG(SvxTextAttrPage, ClickFullWidthHdl_Impl, weld::Toggleable&, void)
{
if( m_xTsbFullWidth->get_state() != TRISTATE_TRUE )
return;
if (IsTextDirectionLeftToRight())
{
// Move text anchor to horizontal middle axis.
switch( m_aCtlPosition.GetActualRP() )
{
case RectPoint::LT:
case RectPoint::RT:
m_aCtlPosition.SetActualRP( RectPoint::MT );
break;
case RectPoint::LM:
case RectPoint::RM:
m_aCtlPosition.SetActualRP( RectPoint::MM );
break;
case RectPoint::LB:
case RectPoint::RB:
m_aCtlPosition.SetActualRP( RectPoint::MB );
break;
default: ;//prevent warning
}
}
else
{
// Move text anchor to vertical middle axis.
switch( m_aCtlPosition.GetActualRP() )
{
case RectPoint::LT:
case RectPoint::LB:
m_aCtlPosition.SetActualRP( RectPoint::LM );
break;
case RectPoint::MT:
case RectPoint::MB:
m_aCtlPosition.SetActualRP( RectPoint::MM );
break;
case RectPoint::RT:
case RectPoint::RB:
m_aCtlPosition.SetActualRP( RectPoint::RM );
break;
default: ;//prevent warning
}
}
}
/*************************************************************************
|*
|* enables/disables "size at text" or "adjust to frame"
|*
\************************************************************************/
IMPL_LINK(SvxTextAttrPage, ClickHdl_Impl, weld::Toggleable&, rButton, void)
{
if (&rButton == m_xTsbAutoGrowSize.get())
{
m_xTsbAutoGrowHeight->set_state(m_xTsbAutoGrowSize->get_state());
if (m_xTsbAutoGrowSize->get_state() == TRISTATE_TRUE)
{
m_xTsbFitToSize->set_state(TRISTATE_FALSE);
m_xTsbContour->set_state(TRISTATE_FALSE);
}
}
else if (&rButton == m_xTsbAutoGrowHeight.get())
m_xTsbAutoGrowSize->set_state(m_xTsbAutoGrowHeight->get_state());
bool bAutoGrowWidth = m_xTsbAutoGrowWidth->get_state() == TRISTATE_TRUE;
bool bAutoGrowHeight = m_xTsbAutoGrowHeight->get_state() == TRISTATE_TRUE;
bool bFitToSize = m_xTsbFitToSize->get_state() == TRISTATE_TRUE;
bool bContour = m_xTsbContour->get_state() == TRISTATE_TRUE;
m_xTsbContour->set_sensitive( !bFitToSize &&
!( ( bAutoGrowWidth && bAutoGrowWidthEnabled ) || ( bAutoGrowHeight && bAutoGrowHeightEnabled ) ) &&
bContourEnabled );
m_xTsbAutoGrowWidth->set_sensitive( !bFitToSize &&
!( bContour && bContourEnabled ) &&
bAutoGrowWidthEnabled );
m_xTsbAutoGrowHeight->set_sensitive( !bFitToSize &&
!( bContour && bContourEnabled ) &&
bAutoGrowHeightEnabled );
m_xTsbFitToSize->set_sensitive( !( ( bAutoGrowWidth && bAutoGrowWidthEnabled ) || ( bAutoGrowHeight && bAutoGrowHeightEnabled ) ) &&
!( bContour && bContourEnabled ) &&
bFitToSizeEnabled );
// #101901# enable/disable metric fields and decorations dependent of contour
m_xFlDistance->set_sensitive(!bContour);
if( bContour && bContourEnabled )
{
m_xMtrFldLeft->set_value(0, FieldUnit::NONE);
m_xMtrFldRight->set_value(0, FieldUnit::NONE);
m_xMtrFldTop->set_value(0, FieldUnit::NONE);
m_xMtrFldBottom->set_value(0, FieldUnit::NONE);
}
// #103516# Do the setup based on states of hor/ver adjust
SfxItemState eVState = rOutAttrs.GetItemState( SDRATTR_TEXT_VERTADJUST );
SfxItemState eHState = rOutAttrs.GetItemState( SDRATTR_TEXT_HORZADJUST );
bool bHorAndVer(SfxItemState::INVALID == eVState || SfxItemState::INVALID == eHState);
// #83698# enable/disable text anchoring dependent of contour
m_xFlPosition->set_sensitive(!bContour && !bHorAndVer);
}
bool SvxTextAttrPage::IsTextDirectionLeftToRight() const
{
// Determine the text writing direction with left to right as default.
bool bLeftToRightDirection = true;
SfxItemState eState = rOutAttrs.GetItemState(SDRATTR_TEXTDIRECTION);
if(SfxItemState::INVALID != eState)
{
const SvxWritingModeItem& rItem = rOutAttrs.Get(SDRATTR_TEXTDIRECTION);
if (rItem.GetValue() == css::text::WritingMode_TB_RL)
bLeftToRightDirection = false;
}
return bLeftToRightDirection;
}
void SvxTextAttrPage::PageCreated(const SfxAllItemSet& aSet)
{
const CntUInt16Item* pObjTypeItem = aSet.GetItem<CntUInt16Item>(SID_SVXTEXTATTRPAGE_OBJKIND, false);
if (pObjTypeItem)
SetObjKind(static_cast<SdrObjKind>(pObjTypeItem->GetValue()));
Construct();
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1048 The 'eRP' variable was assigned the same value.