/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include "tp_3D_SceneGeometry.hxx"
#include <Diagram.hxx>
#include <ChartType.hxx>
#include <ChartTypeHelper.hxx>
#include <ThreeDHelper.hxx>
#include <ControllerLockGuard.hxx>
#include <com/sun/star/drawing/ProjectionMode.hpp>
#include <comphelper/diagnose_ex.hxx>
#include <tools/helpers.hxx>
#include <utility>
#include <vcl/svapp.hxx>
namespace chart
{
using namespace ::com::sun::star;
namespace
{
void lcl_SetMetricFieldLimits(weld::MetricSpinButton& rField, sal_Int64 nLimit)
{
rField.set_range(-1*nLimit, nLimit, FieldUnit::DEGREE);
}
}
ThreeD_SceneGeometry_TabPage::ThreeD_SceneGeometry_TabPage(weld::Container* pParent,
rtl::Reference< ::chart::Diagram > xDiagram,
ControllerLockHelper & rControllerLockHelper)
: m_xDiagram(std::move( xDiagram ))
, m_aAngleTimer("chart2 ThreeD_SceneGeometry_TabPage m_aAngleTimer")
, m_aPerspectiveTimer("chart2 ThreeD_SceneGeometry_TabPage m_aPerspectiveTimer")
, m_nXRotation(0)
, m_nYRotation(0)
, m_nZRotation(0)
, m_bAngleChangePending( false )
, m_bPerspectiveChangePending( false )
, m_rControllerLockHelper( rControllerLockHelper )
, m_xBuilder(Application::CreateBuilder(pParent, u"modules/schart/ui/tp_3D_SceneGeometry.ui"_ustr))
, m_xContainer(m_xBuilder->weld_container(u"tp_3DSceneGeometry"_ustr))
, m_xCbxRightAngledAxes(m_xBuilder->weld_check_button(u"CBX_RIGHT_ANGLED_AXES"_ustr))
, m_xMFXRotation(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_X_ROTATION"_ustr, FieldUnit::DEGREE))
, m_xMFYRotation(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_Y_ROTATION"_ustr, FieldUnit::DEGREE))
, m_xFtZRotation(m_xBuilder->weld_label(u"FT_Z_ROTATION"_ustr))
, m_xMFZRotation(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_Z_ROTATION"_ustr, FieldUnit::DEGREE))
, m_xCbxPerspective(m_xBuilder->weld_check_button(u"CBX_PERSPECTIVE"_ustr))
, m_xMFPerspective(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_PERSPECTIVE"_ustr, FieldUnit::PERCENT))
{
double fXAngle, fYAngle, fZAngle;
m_xDiagram->getRotationAngle( fXAngle, fYAngle, fZAngle );
fXAngle = basegfx::rad2deg(fXAngle);
fYAngle = basegfx::rad2deg(fYAngle);
fZAngle = basegfx::rad2deg(fZAngle);
OSL_ENSURE( fZAngle>=-90 && fZAngle<=90, "z angle is out of valid range" );
lcl_SetMetricFieldLimits( *m_xMFZRotation, 90 );
m_nXRotation = NormAngle180(
::basegfx::fround(fXAngle * pow(10.0, m_xMFXRotation->get_digits())));
m_nYRotation = NormAngle180(
::basegfx::fround(-1.0 * fYAngle * pow(10.0, m_xMFYRotation->get_digits())));
m_nZRotation = NormAngle180(
::basegfx::fround(-1.0 * fZAngle * pow(10.0, m_xMFZRotation->get_digits())));
m_xMFXRotation->set_value(m_nXRotation, FieldUnit::DEGREE);
m_xMFYRotation->set_value(m_nYRotation, FieldUnit::DEGREE);
m_xMFZRotation->set_value(m_nZRotation, FieldUnit::DEGREE);
const int nTimeout = 4*EDIT_UPDATEDATA_TIMEOUT;
m_aAngleTimer.SetTimeout(nTimeout);
m_aAngleTimer.SetInvokeHandler( LINK( this, ThreeD_SceneGeometry_TabPage, AngleChanged ) );
Link<weld::MetricSpinButton&,void> aAngleEditedLink( LINK( this, ThreeD_SceneGeometry_TabPage, AngleEdited ));
m_xMFXRotation->connect_value_changed( aAngleEditedLink );
m_xMFYRotation->connect_value_changed( aAngleEditedLink );
m_xMFZRotation->connect_value_changed( aAngleEditedLink );
drawing::ProjectionMode aProjectionMode = drawing::ProjectionMode_PERSPECTIVE;
m_xDiagram->getPropertyValue( u"D3DScenePerspective"_ustr ) >>= aProjectionMode;
m_xCbxPerspective->set_active( aProjectionMode == drawing::ProjectionMode_PERSPECTIVE );
m_xCbxPerspective->connect_toggled( LINK( this, ThreeD_SceneGeometry_TabPage, PerspectiveToggled ));
sal_Int32 nPerspectivePercentage = 20;
m_xDiagram->getPropertyValue( u"Perspective"_ustr ) >>= nPerspectivePercentage;
m_xMFPerspective->set_value(nPerspectivePercentage, FieldUnit::PERCENT);
m_aPerspectiveTimer.SetTimeout(nTimeout);
m_aPerspectiveTimer.SetInvokeHandler( LINK( this, ThreeD_SceneGeometry_TabPage, PerspectiveChanged ) );
m_xMFPerspective->connect_value_changed( LINK( this, ThreeD_SceneGeometry_TabPage, PerspectiveEdited ) );
m_xMFPerspective->set_sensitive( m_xCbxPerspective->get_active() );
//RightAngledAxes
if (ChartTypeHelper::isSupportingRightAngledAxes(m_xDiagram->getChartTypeByIndex(0)))
{
bool bRightAngledAxes = false;
m_xDiagram->getPropertyValue( u"RightAngledAxes"_ustr ) >>= bRightAngledAxes;
m_xCbxRightAngledAxes->connect_toggled( LINK( this, ThreeD_SceneGeometry_TabPage, RightAngledAxesToggled ));
m_xCbxRightAngledAxes->set_active( bRightAngledAxes );
RightAngledAxesToggled(*m_xCbxRightAngledAxes);
}
else
{
m_xCbxRightAngledAxes->set_sensitive(false);
}
}
ThreeD_SceneGeometry_TabPage::~ThreeD_SceneGeometry_TabPage()
{
}
void ThreeD_SceneGeometry_TabPage::commitPendingChanges()
{
ControllerLockHelperGuard aGuard( m_rControllerLockHelper );
if( m_bAngleChangePending )
applyAnglesToModel();
if( m_bPerspectiveChangePending )
applyPerspectiveToModel();
}
void ThreeD_SceneGeometry_TabPage::applyAnglesToModel()
{
ControllerLockHelperGuard aGuard( m_rControllerLockHelper );
double fXAngle = 0.0, fYAngle = 0.0, fZAngle = 0.0;
if (m_xMFZRotation->get_sensitive())
m_nZRotation = m_xMFZRotation->get_value(FieldUnit::DEGREE);
fXAngle = double(m_nXRotation)/pow(10.0,m_xMFXRotation->get_digits());
fYAngle = double(-1.0*m_nYRotation)/pow(10.0,m_xMFYRotation->get_digits());
fZAngle = double(-1.0*m_nZRotation)/pow(10.0,m_xMFZRotation->get_digits());
fXAngle = basegfx::deg2rad(fXAngle);
fYAngle = basegfx::deg2rad(fYAngle);
fZAngle = basegfx::deg2rad(fZAngle);
m_xDiagram->setRotationAngle( fXAngle, fYAngle, fZAngle );
m_bAngleChangePending = false;
m_aAngleTimer.Stop();
}
IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, AngleEdited, weld::MetricSpinButton&, void)
{
m_nXRotation = m_xMFXRotation->get_value(FieldUnit::DEGREE);
m_nYRotation = m_xMFYRotation->get_value(FieldUnit::DEGREE);
m_bAngleChangePending = true;
m_aAngleTimer.Start();
}
IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, AngleChanged, Timer *, void)
{
applyAnglesToModel();
}
void ThreeD_SceneGeometry_TabPage::applyPerspectiveToModel()
{
ControllerLockHelperGuard aGuard( m_rControllerLockHelper );
drawing::ProjectionMode aMode = m_xCbxPerspective->get_active()
? drawing::ProjectionMode_PERSPECTIVE
: drawing::ProjectionMode_PARALLEL;
try
{
m_xDiagram->setPropertyValue( u"D3DScenePerspective"_ustr , uno::Any( aMode ));
m_xDiagram->setPropertyValue( u"Perspective"_ustr , uno::Any( static_cast<sal_Int32>(m_xMFPerspective->get_value(FieldUnit::PERCENT)) ));
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
m_bPerspectiveChangePending = false;
m_aPerspectiveTimer.Stop();
}
IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, PerspectiveEdited, weld::MetricSpinButton&, void)
{
m_bPerspectiveChangePending = true;
m_aPerspectiveTimer.Start();
}
IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, PerspectiveChanged, Timer *, void)
{
applyPerspectiveToModel();
}
IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, PerspectiveToggled, weld::Toggleable&, void)
{
m_xMFPerspective->set_sensitive(m_xCbxPerspective->get_active());
applyPerspectiveToModel();
}
IMPL_LINK_NOARG(ThreeD_SceneGeometry_TabPage, RightAngledAxesToggled, weld::Toggleable&, void)
{
ControllerLockHelperGuard aGuard( m_rControllerLockHelper );
bool bEnableZ = !m_xCbxRightAngledAxes->get_active();
m_xFtZRotation->set_sensitive( bEnableZ );
m_xMFZRotation->set_sensitive( bEnableZ );
if (!bEnableZ)
{
m_nXRotation = m_xMFXRotation->get_value(FieldUnit::DEGREE);
m_nYRotation = m_xMFYRotation->get_value(FieldUnit::DEGREE);
m_nZRotation = m_xMFZRotation->get_value(FieldUnit::DEGREE);
m_xMFXRotation->set_value(static_cast<sal_Int64>(ThreeDHelper::getValueClippedToRange(static_cast<double>(m_nXRotation), ThreeDHelper::getXDegreeAngleLimitForRightAngledAxes())), FieldUnit::DEGREE);
m_xMFYRotation->set_value(static_cast<sal_Int64>(ThreeDHelper::getValueClippedToRange(static_cast<double>(m_nYRotation), ThreeDHelper::getYDegreeAngleLimitForRightAngledAxes())), FieldUnit::DEGREE);
m_xMFZRotation->set_text(u""_ustr);
lcl_SetMetricFieldLimits( *m_xMFXRotation, static_cast<sal_Int64>(ThreeDHelper::getXDegreeAngleLimitForRightAngledAxes()));
lcl_SetMetricFieldLimits( *m_xMFYRotation, static_cast<sal_Int64>(ThreeDHelper::getYDegreeAngleLimitForRightAngledAxes()));
}
else
{
lcl_SetMetricFieldLimits( *m_xMFXRotation, 180 );
lcl_SetMetricFieldLimits( *m_xMFYRotation, 180 );
m_xMFXRotation->set_value(m_nXRotation, FieldUnit::DEGREE);
m_xMFYRotation->set_value(m_nYRotation, FieldUnit::DEGREE);
m_xMFZRotation->set_value(m_nZRotation, FieldUnit::DEGREE);
}
if (m_xDiagram)
m_xDiagram->switchRightAngledAxes( m_xCbxRightAngledAxes->get_active() );
}
} //namespace chart
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V547 Expression is always true.