/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
/*
* This file is part of LibreOffice published API.
*/
#ifndef INCLUDED_RTL_USTRBUF_HXX
#define INCLUDED_RTL_USTRBUF_HXX
#include "sal/config.h"
#include <cassert>
#include <cstring>
#include <limits>
#include <new>
#if defined LIBO_INTERNAL_ONLY
#include <string_view>
#include <type_traits>
#include <utility>
#endif
#include "rtl/ustrbuf.h"
#include "rtl/ustring.hxx"
#include "rtl/stringutils.hxx"
#include "sal/types.h"
#ifdef LIBO_INTERNAL_ONLY // "RTL_FAST_STRING"
#include "o3tl/safeint.hxx"
#include "rtl/stringconcat.hxx"
#endif
#ifdef RTL_STRING_UNITTEST
extern bool rtl_string_unittest_invalid_conversion;
#endif
// The unittest uses slightly different code to help check that the proper
// calls are made. The class is put into a different namespace to make
// sure the compiler generates a different (if generating also non-inline)
// copy of the function and does not merge them together. The class
// is "brought" into the proper rtl namespace by a typedef below.
#ifdef RTL_STRING_UNITTEST
#define rtl rtlunittest
#endif
namespace rtl
{
#ifdef RTL_STRING_UNITTEST
#undef rtl
#endif
/** A string buffer implements a mutable sequence of characters.
*/
class SAL_WARN_UNUSED OUStringBuffer
{
friend class OUString;
public:
/**
Constructs a string buffer with no characters in it and an
initial capacity of 16 characters.
*/
OUStringBuffer()
: pData(NULL)
, nCapacity( 16 )
{
rtl_uString_new_WithLength( &pData, nCapacity );
}
/**
Allocates a new string buffer that contains the same sequence of
characters as the string buffer argument.
@param value a <code>OUStringBuffer</code>.
*/
OUStringBuffer( const OUStringBuffer & value )
: pData(NULL)
, nCapacity( value.nCapacity )
{
rtl_uStringbuffer_newFromStringBuffer( &pData, value.nCapacity, value.pData );
}
/**
Constructs a string buffer with no characters in it and an
initial capacity specified by the <code>length</code> argument.
@param length the initial capacity.
*/
explicit OUStringBuffer(sal_Int32 length)
: pData(NULL)
, nCapacity( length )
{
rtl_uString_new_WithLength( &pData, length );
}
#if defined LIBO_INTERNAL_ONLY
template<typename T>
explicit OUStringBuffer(T length, std::enable_if_t<std::is_integral_v<T>, int> = 0)
: OUStringBuffer(static_cast<sal_Int32>(length))
{
assert(libreoffice_internal::IsValidStrLen(length));
}
// avoid (obvious) bugs
explicit OUStringBuffer(bool) = delete;
explicit OUStringBuffer(char) = delete;
explicit OUStringBuffer(wchar_t) = delete;
#if !(defined _MSC_VER && _MSC_VER >= 1930 && _MSC_VER <= 1939 && defined _MANAGED)
explicit OUStringBuffer(char8_t) = delete;
#endif
explicit OUStringBuffer(char16_t) = delete;
explicit OUStringBuffer(char32_t) = delete;
#endif
/**
Constructs a string buffer so that it represents the same
sequence of characters as the string argument.
The initial
capacity of the string buffer is <code>16</code> plus the length
of the string argument.
@param value the initial contents of the buffer.
*/
#if defined LIBO_INTERNAL_ONLY
OUStringBuffer(std::u16string_view sv)
: pData(nullptr)
, nCapacity(libreoffice_internal::ThrowIfInvalidStrLen(sv.length(), 16) + 16)
{
rtl_uStringbuffer_newFromStr_WithLength( &pData, sv.data(), sv.length() );
}
#else
OUStringBuffer(const OUString& value)
: pData(NULL)
, nCapacity( value.getLength() + 16 )
{
rtl_uStringbuffer_newFromStr_WithLength( &pData, value.getStr(), value.getLength() );
}
#endif
template< typename T >
OUStringBuffer( T& literal, typename libreoffice_internal::ConstCharArrayDetector< T, libreoffice_internal::Dummy >::Type = libreoffice_internal::Dummy() )
: pData(NULL)
, nCapacity( libreoffice_internal::ConstCharArrayDetector<T>::length + 16 )
{
assert(
libreoffice_internal::ConstCharArrayDetector<T>::isValid(literal));
rtl_uString_newFromLiteral(
&pData,
libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length, 16);
#ifdef RTL_STRING_UNITTEST
rtl_string_unittest_const_literal = true;
#endif
}
#if defined LIBO_INTERNAL_ONLY
/** @overload @since LibreOffice 5.3 */
template<typename T>
OUStringBuffer(
T & literal,
typename libreoffice_internal::ConstCharArrayDetector<
T, libreoffice_internal::Dummy>::TypeUtf16
= libreoffice_internal::Dummy()):
pData(nullptr),
nCapacity(libreoffice_internal::ConstCharArrayDetector<T>::length + 16)
{
rtl_uStringbuffer_newFromStr_WithLength(
&pData,
libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length);
}
#endif
#if defined LIBO_INTERNAL_ONLY && defined RTL_STRING_UNITTEST
/// @cond INTERNAL
/**
* Only used by unittests to detect incorrect conversions.
* @internal
*/
template< typename T >
OUStringBuffer( T&, typename libreoffice_internal::ExceptConstCharArrayDetector< T >::Type = libreoffice_internal::Dummy() )
{
pData = NULL;
nCapacity = 10;
rtl_uString_newFromLiteral( &pData, "!!br0ken!!", 10, 0 ); // set to garbage
rtl_string_unittest_invalid_conversion = true;
}
/**
* Only used by unittests to detect incorrect conversions.
* @internal
*/
template< typename T >
OUStringBuffer( const T&, typename libreoffice_internal::ExceptCharArrayDetector< T >::Type = libreoffice_internal::Dummy() )
{
pData = NULL;
nCapacity = 10;
rtl_uString_newFromLiteral( &pData, "!!br0ken!!", 10, 0 ); // set to garbage
rtl_string_unittest_invalid_conversion = true;
}
/// @endcond
#endif
#ifdef LIBO_INTERNAL_ONLY // "RTL_FAST_STRING"
/**
@overload
@internal
*/
template< typename T1, typename T2 >
OUStringBuffer( OUStringConcat< T1, T2 >&& c )
{
const sal_Int32 l = c.length();
nCapacity = l + 16;
pData = rtl_uString_alloc( nCapacity );
sal_Unicode* end = c.addData( pData->buffer );
*end = '\0';
pData->length = l;
}
/**
@overload
@internal
*/
template< std::size_t N >
OUStringBuffer( OUStringNumber< N >&& n )
: OUStringBuffer(std::u16string_view(n))
{
}
#endif
#if defined LIBO_INTERNAL_ONLY
operator std::u16string_view() const { return {getStr(), sal_uInt32(getLength())}; }
#endif
/** Assign to this a copy of value.
*/
OUStringBuffer& operator = ( const OUStringBuffer& value )
{
if (this != &value)
{
rtl_uStringbuffer_newFromStringBuffer(&pData,
value.nCapacity,
value.pData);
nCapacity = value.nCapacity;
}
return *this;
}
#if defined LIBO_INTERNAL_ONLY
/** Move assignment
* @since LibreOffice 7.3
*/
OUStringBuffer& operator = ( OUStringBuffer&& value ) noexcept
{
rtl_uString_release( pData );
pData = value.pData;
nCapacity = value.nCapacity;
value.pData = nullptr;
value.nCapacity = 0;
rtl_uString_new( &value.pData );
return *this;
}
#endif
/** Assign from a string.
@since LibreOffice 5.3
*/
#if defined LIBO_INTERNAL_ONLY
OUStringBuffer & operator =(std::u16string_view string) {
sal_Int32 n = string.length();
if (n >= nCapacity) {
ensureCapacity(n + 16); //TODO: check for overflow
}
std::memcpy(
pData->buffer, string.data(),
n * sizeof (sal_Unicode));
pData->buffer[n] = '\0';
pData->length = n;
return *this;
}
#else
OUStringBuffer & operator =(OUString const & string) {
sal_Int32 n = string.getLength();
if (n >= nCapacity) {
ensureCapacity(n + 16); //TODO: check for overflow
}
std::memcpy(
pData->buffer, string.pData->buffer,
(n + 1) * sizeof (sal_Unicode));
pData->length = n;
return *this;
}
#endif
/** Assign from a string literal.
@since LibreOffice 5.3
*/
template<typename T>
typename
libreoffice_internal::ConstCharArrayDetector<T, OUStringBuffer &>::Type
operator =(T & literal) {
assert(
libreoffice_internal::ConstCharArrayDetector<T>::isValid(literal));
sal_Int32 const n
= libreoffice_internal::ConstCharArrayDetector<T>::length;
if (n >= nCapacity) {
ensureCapacity(n + 16); //TODO: check for overflow
}
char const * from
= libreoffice_internal::ConstCharArrayDetector<T>::toPointer(
literal);
sal_Unicode * to = pData->buffer;
for (sal_Int32 i = 0; i <= n; ++i) {
to[i] = from[i];
}
pData->length = n;
return *this;
}
#if defined LIBO_INTERNAL_ONLY
/** @overload @since LibreOffice 5.3 */
template<typename T>
typename libreoffice_internal::ConstCharArrayDetector<
T, OUStringBuffer &>::TypeUtf16
operator =(T & literal) {
return operator=(
std::u16string_view(libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length));
}
#endif
#if defined LIBO_INTERNAL_ONLY
/** @overload @since LibreOffice 5.3 */
template<typename T1, typename T2>
OUStringBuffer & operator =(OUStringConcat<T1, T2> && concat) {
sal_Int32 const n = concat.length();
if (n >= nCapacity) {
ensureCapacity(n + 16); //TODO: check for overflow
}
*concat.addData(pData->buffer) = 0;
pData->length = n;
return *this;
}
/** @overload @internal */
template<std::size_t N>
OUStringBuffer & operator =(OUStringNumber<N> && n)
{
return operator =(std::u16string_view(n));
}
#endif
/**
Release the string data.
*/
~OUStringBuffer()
{
rtl_uString_release( pData );
}
/**
Fill the string data in the new string and clear the buffer.
This method is more efficient than the constructor of the string. It does
not copy the buffer.
@return the string previously contained in the buffer.
*/
SAL_WARN_UNUSED_RESULT OUString makeStringAndClear()
{
return OUString(
rtl_uStringBuffer_makeStringAndClear( &pData, &nCapacity ),
SAL_NO_ACQUIRE );
}
/**
Returns the length (character count) of this string buffer.
@return the number of characters in this string buffer.
*/
sal_Int32 getLength() const
{
return pData->length;
}
/**
Checks if a string buffer is empty.
@return true if the string buffer is empty;
false, otherwise.
@since LibreOffice 4.1
*/
bool isEmpty() const
{
return pData->length == 0;
}
/**
Returns the current capacity of the String buffer.
The capacity
is the amount of storage available for newly inserted
characters. The real buffer size is 2 bytes longer, because
all strings are 0 terminated.
@return the current capacity of this string buffer.
*/
sal_Int32 getCapacity() const
{
return nCapacity;
}
/**
Ensures that the capacity of the buffer is at least equal to the
specified minimum.
The new capacity will be at least as large as the maximum of the current
length (so that no contents of the buffer is destroyed) and the given
minimumCapacity. If the given minimumCapacity is negative, nothing is
changed.
@param minimumCapacity the minimum desired capacity.
*/
void ensureCapacity(sal_Int32 minimumCapacity)
{
rtl_uStringbuffer_ensureCapacity( &pData, &nCapacity, minimumCapacity );
}
/**
Sets the length of this String buffer.
If the <code>newLength</code> argument is less than the current
length of the string buffer, the string buffer is truncated to
contain exactly the number of characters given by the
<code>newLength</code> argument.
<p>
If the <code>newLength</code> argument is greater than or equal
to the current length, sufficient null characters
(<code>'\u0000'</code>) are appended to the string buffer so that
length becomes the <code>newLength</code> argument.
<p>
The <code>newLength</code> argument must be greater than or equal
to <code>0</code>.
@param newLength the new length of the buffer.
*/
void setLength(sal_Int32 newLength)
{
assert(newLength >= 0);
// Avoid modifications if pData points to const empty string:
if( newLength != pData->length )
{
if( newLength > nCapacity )
rtl_uStringbuffer_ensureCapacity(&pData, &nCapacity, newLength);
else
pData->buffer[newLength] = 0;
pData->length = newLength;
}
}
/**
Returns the character at a specific index in this string buffer.
The first character of a string buffer is at index
<code>0</code>, the next at index <code>1</code>, and so on, for
array indexing.
<p>
The index argument must be greater than or equal to
<code>0</code>, and less than the length of this string buffer.
@param index the index of the desired character.
@return the character at the specified index of this string buffer.
*/
SAL_DEPRECATED("use rtl::OUStringBuffer::operator [] instead")
sal_Unicode charAt( sal_Int32 index ) const
{
assert(index >= 0 && index < pData->length);
return pData->buffer[ index ];
}
/**
The character at the specified index of this string buffer is set
to <code>ch</code>.
The index argument must be greater than or equal to
<code>0</code>, and less than the length of this string buffer.
@param index the index of the character to modify.
@param ch the new character.
*/
SAL_DEPRECATED("use rtl::OUStringBuffer::operator [] instead")
OUStringBuffer & setCharAt(sal_Int32 index, sal_Unicode ch)
{
assert(index >= 0 && index < pData->length);
pData->buffer[ index ] = ch;
return *this;
}
/**
Return a null terminated unicode character array.
*/
const sal_Unicode* getStr() const SAL_RETURNS_NONNULL { return pData->buffer; }
/**
Access to individual characters.
@param index must be non-negative and less than length.
@return a reference to the character at the given index.
@since LibreOffice 3.5
*/
sal_Unicode & operator [](sal_Int32 index)
{
assert(index >= 0 && index < pData->length);
return pData->buffer[index];
}
/**
Access to individual characters.
@param index must be non-negative and less than length.
@return a reference to the character at the given index.
@since LibreOffice 4.2
*/
const sal_Unicode & operator [](sal_Int32 index) const
{
assert(index >= 0 && index < pData->length);
return pData->buffer[index];
}
/**
Return an OUString instance reflecting the current content
of this OUStringBuffer.
*/
OUString toString() const
{
return OUString(pData->buffer, pData->length);
}
/**
Appends the string to this string buffer.
The characters of the <code>OUString</code> argument are appended, in
order, to the contents of this string buffer, increasing the
length of this string buffer by the length of the argument.
@param str a string.
@return this string buffer.
*/
#if !defined LIBO_INTERNAL_ONLY
OUStringBuffer & append(const OUString &str)
#else
OUStringBuffer & append(std::u16string_view str)
#endif
{
return insert(getLength(), str);
}
#if !defined LIBO_INTERNAL_ONLY
/**
Appends the content of a stringbuffer to this string buffer.
The characters of the <code>OUStringBuffer</code> argument are appended, in
order, to the contents of this string buffer, increasing the
length of this string buffer by the length of the argument.
@param str a string.
@return this string buffer.
@since LibreOffice 4.0
*/
OUStringBuffer & append(const OUStringBuffer &str)
{
if(!str.isEmpty())
{
append( str.getStr(), str.getLength() );
}
return *this;
}
#endif
/**
Appends the string representation of the <code>char</code> array
argument to this string buffer.
The characters of the array argument are appended, in order, to
the contents of this string buffer. The length of this string
buffer increases by the length of the argument.
@param str the characters to be appended.
@return this string buffer.
*/
#if defined LIBO_INTERNAL_ONLY
template<typename T>
typename libreoffice_internal::CharPtrDetector<T, OUStringBuffer &>::TypeUtf16
append(T const & str)
#else
OUStringBuffer & append( const sal_Unicode * str )
#endif
{
return insert(getLength(), str);
}
/**
Appends the string representation of the <code>char</code> array
argument to this string buffer.
Characters of the character array <code>str</code> are appended,
in order, to the contents of this string buffer. The length of this
string buffer increases by the value of <code>len</code>.
@param str the characters to be appended; must be non-null, and must
point to at least len characters
@param len the number of characters to append; must be non-negative
@return this string buffer.
*/
OUStringBuffer & append( const sal_Unicode * str, sal_Int32 len)
{
return insert(getLength(), str, len);
}
/**
@overload
This function accepts an ASCII string literal as its argument.
@since LibreOffice 3.6
*/
template< typename T >
typename libreoffice_internal::ConstCharArrayDetector< T, OUStringBuffer& >::Type append( T& literal )
{
return insert(getLength(), literal);
}
#if defined LIBO_INTERNAL_ONLY
template<typename T>
typename libreoffice_internal::NonConstCharArrayDetector<T, OUStringBuffer &>::TypeUtf16
append(T & value) { return append(static_cast<sal_Unicode *>(value)); }
/** @overload @since LibreOffice 5.3 */
template<typename T>
typename libreoffice_internal::ConstCharArrayDetector<
T, OUStringBuffer &>::TypeUtf16
append(T & literal) {
return insert(getLength(), literal);
}
#endif
#ifdef LIBO_INTERNAL_ONLY // "RTL_FAST_STRING"
/**
@overload
@internal
*/
template< typename T1, typename T2 >
OUStringBuffer& append( OUStringConcat< T1, T2 >&& c )
{
return insert(getLength(), std::move(c));
}
#endif
/**
Appends a 8-Bit ASCII character string to this string buffer.
Since this method is optimized for performance. the ASCII
character values are not converted in any way. The caller
has to make sure that all ASCII characters are in the
allowed range between 0 and 127. The ASCII string must be
NULL-terminated.
<p>
The characters of the array argument are appended, in order, to
the contents of this string buffer. The length of this string
buffer increases by the length of the argument.
@param str the 8-Bit ASCII characters to be appended.
@return this string buffer.
*/
OUStringBuffer & appendAscii( const char * str )
{
return appendAscii( str, rtl_str_getLength( str ) );
}
/**
Appends a 8-Bit ASCII character string to this string buffer.
Since this method is optimized for performance. the ASCII
character values are not converted in any way. The caller
has to make sure that all ASCII characters are in the
allowed range between 0 and 127.
<p>
Characters of the character array <code>str</code> are appended,
in order, to the contents of this string buffer. The length of this
string buffer increases by the value of <code>len</code>.
@param str the 8-Bit ASCII characters to be appended; must be non-null,
and must point to at least len characters
@param len the number of characters to append; must be non-negative
@return this string buffer.
*/
OUStringBuffer & appendAscii( const char * str, sal_Int32 len)
{
rtl_uStringbuffer_insert_ascii( &pData, &nCapacity, getLength(), str, len );
return *this;
}
/**
Appends the string representation of the <code>bool</code>
argument to the string buffer.
The argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then appended to this string buffer.
@param b a <code>bool</code>.
@return this string buffer.
@since LibreOffice 4.1
*/
OUStringBuffer & append(bool b)
{
return insert(getLength(), b);
}
/// @cond INTERNAL
// Pointer can be automatically converted to bool, which is unwanted here.
// Explicitly delete all pointer append() overloads to prevent this
// (except for char* and sal_Unicode* overloads, which are handled elsewhere).
template< typename T >
typename libreoffice_internal::Enable< void,
!libreoffice_internal::CharPtrDetector< T* >::ok && !libreoffice_internal::SalUnicodePtrDetector< T* >::ok >::Type
append( T* ) SAL_DELETED_FUNCTION;
/// @endcond
// This overload is needed because OUString has a ctor from rtl_uString*, but
// the bool overload above would be preferred to the conversion.
/**
@internal
*/
OUStringBuffer & append(rtl_uString* str)
{
return append( OUString::unacquired( &str ));
}
/**
Appends the string representation of the <code>sal_Bool</code>
argument to the string buffer.
The argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then appended to this string buffer.
@param b a <code>sal_Bool</code>.
@return this string buffer.
*/
OUStringBuffer & append(sal_Bool b)
{
return insert(getLength(), b);
}
/**
Appends the string representation of the ASCII <code>char</code>
argument to this string buffer.
The argument is appended to the contents of this string buffer.
The length of this string buffer increases by <code>1</code>.
@param c an ASCII <code>char</code>.
@return this string buffer.
@since LibreOffice 3.5
*/
OUStringBuffer & append(char c)
{
assert(static_cast< unsigned char >(c) <= 0x7F);
return insert(getLength(), c);
}
/**
Appends the string representation of the <code>char</code>
argument to this string buffer.
The argument is appended to the contents of this string buffer.
The length of this string buffer increases by <code>1</code>.
@param c a <code>char</code>.
@return this string buffer.
*/
OUStringBuffer & append(sal_Unicode c)
{
return insert(getLength(), c);
}
#if defined LIBO_INTERNAL_ONLY
void append(sal_uInt16) = delete;
#endif
/**
Appends the string representation of the <code>sal_Int32</code>
argument to this string buffer.
The argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then appended to this string buffer.
@param i an <code>sal_Int32</code>.
@param radix the radix
@return this string buffer.
*/
OUStringBuffer & append(sal_Int32 i, sal_Int16 radix = 10 )
{
return insert(getLength(), i, radix);
}
/**
Appends the string representation of the <code>long</code>
argument to this string buffer.
The argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then appended to this string buffer.
@param l a <code>long</code>.
@param radix the radix
@return this string buffer.
*/
OUStringBuffer & append(sal_Int64 l, sal_Int16 radix = 10 )
{
return insert(getLength(), l, radix);
}
/**
Appends the string representation of the <code>float</code>
argument to this string buffer.
The argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then appended to this string buffer.
@param f a <code>float</code>.
@return this string buffer.
*/
OUStringBuffer & append(float f)
{
return insert(getLength(), f);
}
/**
Appends the string representation of the <code>double</code>
argument to this string buffer.
The argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then appended to this string buffer.
@param d a <code>double</code>.
@return this string buffer.
*/
OUStringBuffer & append(double d)
{
return insert(getLength(), d);
}
/**
Appends a single UTF-32 character to this string buffer.
<p>The single UTF-32 character will be represented within the string
buffer as either one or two UTF-16 code units.</p>
@param c a well-formed UTF-32 code unit (that is, a value in the range
<code>0</code>–<code>0x10FFFF</code>, but excluding
<code>0xD800</code>–<code>0xDFFF</code>)
@return
this string buffer
*/
OUStringBuffer & appendUtf32(sal_uInt32 c) {
return insertUtf32(getLength(), c);
}
/**
Unsafe way to make space for a fixed amount of characters to be appended
into this OUStringBuffer.
A call to this function must immediately be followed by code that
completely fills the uninitialized block pointed to by the return value.
@param length the length of the uninitialized block of sal_Unicode
entities; must be non-negative
@return a pointer to the start of the uninitialized block; only valid
until this OUStringBuffer's capacity changes
@since LibreOffice 4.4
*/
sal_Unicode * appendUninitialized(sal_Int32 length) SAL_RETURNS_NONNULL {
sal_Int32 n = getLength();
rtl_uStringbuffer_insert(&pData, &nCapacity, n, NULL, length);
return pData->buffer + n;
}
#if defined LIBO_INTERNAL_ONLY
/**
"Stream" operator to append a value to this OUStringBuffer.
@internal
@since LibreOffice 7.5
*/
template<typename T>
OUStringBuffer& operator<<(T&& rValue)
{
return append(std::forward<T>(rValue));
}
#endif
/**
Inserts the string into this string buffer.
The characters of the <code>String</code> argument are inserted, in
order, into this string buffer at the indicated offset. The length
of this string buffer is increased by the length of the argument.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param str a string.
@return this string buffer.
*/
#if defined LIBO_INTERNAL_ONLY
OUStringBuffer & insert(sal_Int32 offset, std::u16string_view str)
{
return insert(offset, str.data(), libreoffice_internal::ThrowIfInvalidStrLen(str.length()));
}
#else
OUStringBuffer & insert(sal_Int32 offset, const OUString & str)
{
return insert( offset, str.getStr(), str.getLength() );
}
#endif
#ifdef LIBO_INTERNAL_ONLY // "RTL_FAST_STRING"
/**
@overload
@internal
*/
template <typename T1, typename T2>
OUStringBuffer& insert(sal_Int32 offset, OUStringConcat<T1, T2>&& c)
{
const size_t l = c.length();
if (l == 0)
return *this;
if (l > o3tl::make_unsigned(std::numeric_limits<sal_Int32>::max() - pData->length))
throw std::bad_alloc();
rtl_uStringbuffer_insert(&pData, &nCapacity, offset, nullptr, l);
/* insert the new characters */
c.addData(pData->buffer + offset);
return *this;
}
#endif
/**
Inserts the string representation of the <code>char</code> array
argument into this string buffer.
The characters of the array argument are inserted into the
contents of this string buffer at the position indicated by
<code>offset</code>. The length of this string buffer increases by
the length of the argument.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param str a character array.
@return this string buffer.
*/
OUStringBuffer & insert( sal_Int32 offset, const sal_Unicode * str )
{
return insert( offset, str, rtl_ustr_getLength( str ) );
}
/**
Inserts the string representation of the <code>char</code> array
argument into this string buffer.
The characters of the array argument are inserted into the
contents of this string buffer at the position indicated by
<code>offset</code>. The length of this string buffer increases by
the length of the argument.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param str a character array.
@param len the number of characters to append.
@return this string buffer.
*/
OUStringBuffer & insert( sal_Int32 offset, const sal_Unicode * str, sal_Int32 len)
{
assert( len == 0 || str != NULL ); // cannot assert that in rtl_uStringbuffer_insert
rtl_uStringbuffer_insert( &pData, &nCapacity, offset, str, len );
return *this;
}
/**
@overload
This function accepts an ASCII string literal as its argument.
@since LibreOffice 3.6
*/
template< typename T >
typename libreoffice_internal::ConstCharArrayDetector< T, OUStringBuffer& >::Type insert( sal_Int32 offset, T& literal )
{
assert(
libreoffice_internal::ConstCharArrayDetector<T>::isValid(literal));
rtl_uStringbuffer_insert_ascii(
&pData, &nCapacity, offset,
libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length);
return *this;
}
#if defined LIBO_INTERNAL_ONLY
/** @overload @since LibreOffice 5.3 */
template<typename T>
typename libreoffice_internal::ConstCharArrayDetector<
T, OUStringBuffer &>::TypeUtf16
insert(sal_Int32 offset, T & literal) {
return insert(
offset,
libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length);
}
#endif
/**
Inserts the string representation of the <code>sal_Bool</code>
argument into this string buffer.
The second argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then inserted into this string buffer at the indicated
offset.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param b a <code>sal_Bool</code>.
@return this string buffer.
*/
OUStringBuffer & insert(sal_Int32 offset, sal_Bool b)
{
sal_Unicode sz[RTL_USTR_MAX_VALUEOFBOOLEAN];
return insert( offset, sz, rtl_ustr_valueOfBoolean( sz, b ) );
}
/**
Inserts the string representation of the <code>bool</code>
argument into this string buffer.
The second argument is converted to a string as if by the method
<code>OUString::boolean</code>, and the characters of that
string are then inserted into this string buffer at the indicated
offset.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param b a <code>bool</code>.
@return this string buffer.
@since LibreOffice 4.3
*/
OUStringBuffer & insert(sal_Int32 offset, bool b)
{
sal_Unicode sz[RTL_USTR_MAX_VALUEOFBOOLEAN];
return insert( offset, sz, rtl_ustr_valueOfBoolean( sz, b ) );
}
/**
Inserts the string representation of the <code>char</code>
argument into this string buffer.
The second argument is inserted into the contents of this string
buffer at the position indicated by <code>offset</code>. The length
of this string buffer increases by one.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param c a <code>char</code>.
@return this string buffer.
@since LibreOffice 3.6
*/
OUStringBuffer & insert(sal_Int32 offset, char c)
{
return insert(offset, sal_Unicode(c));
}
/**
Inserts the string representation of the <code>char</code>
argument into this string buffer.
The second argument is inserted into the contents of this string
buffer at the position indicated by <code>offset</code>. The length
of this string buffer increases by one.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param c a <code>char</code>.
@return this string buffer.
*/
OUStringBuffer & insert(sal_Int32 offset, sal_Unicode c)
{
return insert( offset, &c, 1 );
}
/**
Inserts the string representation of the second <code>sal_Int32</code>
argument into this string buffer.
The second argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then inserted into this string buffer at the indicated
offset.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param i an <code>sal_Int32</code>.
@param radix the radix.
@return this string buffer.
@exception StringIndexOutOfBoundsException if the offset is invalid.
*/
OUStringBuffer & insert(sal_Int32 offset, sal_Int32 i, sal_Int16 radix = 10 )
{
sal_Unicode sz[RTL_USTR_MAX_VALUEOFINT32];
return insert( offset, sz, rtl_ustr_valueOfInt32( sz, i, radix ) );
}
/**
Inserts the string representation of the <code>long</code>
argument into this string buffer.
The second argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then inserted into this string buffer at the indicated
offset.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param l a <code>long</code>.
@param radix the radix.
@return this string buffer.
@exception StringIndexOutOfBoundsException if the offset is invalid.
*/
OUStringBuffer & insert(sal_Int32 offset, sal_Int64 l, sal_Int16 radix = 10 )
{
sal_Unicode sz[RTL_USTR_MAX_VALUEOFINT64];
return insert( offset, sz, rtl_ustr_valueOfInt64( sz, l, radix ) );
}
/**
Inserts the string representation of the <code>float</code>
argument into this string buffer.
The second argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then inserted into this string buffer at the indicated
offset.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param f a <code>float</code>.
@return this string buffer.
@exception StringIndexOutOfBoundsException if the offset is invalid.
*/
OUStringBuffer & insert(sal_Int32 offset, float f)
{
// Same as rtl::str::valueOfFP, used for rtl_ustr_valueOfFloat
rtl_math_doubleToUString(&pData, &nCapacity, offset, f, rtl_math_StringFormat_G,
RTL_USTR_MAX_VALUEOFFLOAT - SAL_N_ELEMENTS("-x.E-xxx") + 1, '.',
NULL, 0, true);
return *this;
}
/**
Inserts the string representation of the <code>double</code>
argument into this string buffer.
The second argument is converted to a string as if by the method
<code>String.valueOf</code>, and the characters of that
string are then inserted into this string buffer at the indicated
offset.
<p>
The offset argument must be greater than or equal to
<code>0</code>, and less than or equal to the length of this
string buffer.
@param offset the offset.
@param d a <code>double</code>.
@return this string buffer.
@exception StringIndexOutOfBoundsException if the offset is invalid.
*/
OUStringBuffer & insert(sal_Int32 offset, double d)
{
// Same as rtl::str::valueOfFP, used for rtl_ustr_valueOfDouble
rtl_math_doubleToUString(&pData, &nCapacity, offset, d, rtl_math_StringFormat_G,
RTL_USTR_MAX_VALUEOFDOUBLE - SAL_N_ELEMENTS("-x.E-xxx") + 1, '.',
NULL, 0, true);
return *this;
}
/**
Inserts a single UTF-32 character into this string buffer.
<p>The single UTF-32 character will be represented within the string
buffer as either one or two UTF-16 code units.</p>
@param offset the offset into this string buffer (from zero to the length
of this string buffer, inclusive)
@param c a well-formed UTF-32 code unit (that is, a value in the range
<code>0</code>–<code>0x10FFFF</code>, but excluding
<code>0xD800</code>–<code>0xDFFF</code>)
@return this string buffer
*/
OUStringBuffer & insertUtf32(sal_Int32 offset, sal_uInt32 c) {
rtl_uStringbuffer_insertUtf32(&pData, &nCapacity, offset, c);
return *this;
}
/**
Removes the characters in a substring of this sequence.
The substring begins at the specified <code>start</code> and
is <code>len</code> characters long.
start must be >= 0 && <= This->length
@param start The beginning index, inclusive
@param len The substring length
@return this string buffer.
*/
OUStringBuffer & remove( sal_Int32 start, sal_Int32 len )
{
rtl_uStringbuffer_remove( &pData, start, len );
return *this;
}
/**
Removes the tail of a string buffer start at the indicate position
start must be >= 0 && <= This->length
@param start The beginning index, inclusive. default to 0
@return this string buffer.
@since LibreOffice 4.0
*/
OUStringBuffer & truncate( sal_Int32 start = 0 )
{
rtl_uStringbuffer_remove( &pData, start, getLength() - start );
return *this;
}
/**
Replace all occurrences of
oldChar in this string buffer with newChar.
@since LibreOffice 4.0
@param oldChar the old character.
@param newChar the new character.
@return this string buffer
*/
OUStringBuffer& replace( sal_Unicode oldChar, sal_Unicode newChar )
{
sal_Int32 index = 0;
while((index = indexOf(oldChar, index)) >= 0)
{
pData->buffer[ index ] = newChar;
}
return *this;
}
/** Allows access to the internal data of this OUStringBuffer, for effective
manipulation.
This method should be used with care. After you have called this
method, you may use the returned pInternalData or pInternalCapacity only
as long as you make no other method call on this OUStringBuffer.
@param pInternalData
This output parameter receives a pointer to the internal data
(rtl_uString pointer). pInternalData itself must not be null.
@param pInternalCapacity
This output parameter receives a pointer to the internal capacity.
pInternalCapacity itself must not be null.
*/
void accessInternals(rtl_uString *** pInternalData,
sal_Int32 ** pInternalCapacity)
{
*pInternalData = &pData;
*pInternalCapacity = &nCapacity;
}
/**
Returns the index within this string of the first occurrence of the
specified character, starting the search at the specified index.
@since LibreOffice 4.0
@param ch character to be located.
@param fromIndex the index to start the search from.
The index must be greater or equal than 0
and less or equal as the string length.
@return the index of the first occurrence of the character in the
character sequence represented by this string that is
greater than or equal to fromIndex, or
-1 if the character does not occur.
*/
sal_Int32 indexOf( sal_Unicode ch, sal_Int32 fromIndex = 0 ) const
{
assert( fromIndex >= 0 && fromIndex <= pData->length );
sal_Int32 ret = rtl_ustr_indexOfChar_WithLength( pData->buffer+fromIndex, pData->length-fromIndex, ch );
return (ret < 0 ? ret : ret+fromIndex);
}
/**
Returns the index within this string of the last occurrence of the
specified character, searching backward starting at the end.
@since LibreOffice 4.0
@param ch character to be located.
@return the index of the last occurrence of the character in the
character sequence represented by this string, or
-1 if the character does not occur.
*/
sal_Int32 lastIndexOf( sal_Unicode ch ) const
{
return rtl_ustr_lastIndexOfChar_WithLength( pData->buffer, pData->length, ch );
}
/**
Returns the index within this string of the last occurrence of the
specified character, searching backward starting before the specified
index.
@since LibreOffice 4.0
@param ch character to be located.
@param fromIndex the index before which to start the search.
@return the index of the last occurrence of the character in the
character sequence represented by this string that
is less than fromIndex, or -1
if the character does not occur before that point.
*/
sal_Int32 lastIndexOf( sal_Unicode ch, sal_Int32 fromIndex ) const
{
assert( fromIndex >= 0 && fromIndex <= pData->length );
return rtl_ustr_lastIndexOfChar_WithLength( pData->buffer, fromIndex, ch );
}
/**
Returns the index within this string of the first occurrence of the
specified substring, starting at the specified index.
If str doesn't include any character, always -1 is
returned. This is also the case, if both strings are empty.
@since LibreOffice 4.0
@param str the substring to search for.
@param fromIndex the index to start the search from.
@return If the string argument occurs one or more times as a substring
within this string at the starting index, then the index
of the first character of the first such substring is
returned. If it does not occur as a substring starting
at fromIndex or beyond, -1 is returned.
*/
#if defined LIBO_INTERNAL_ONLY
sal_Int32 indexOf( std::u16string_view str, sal_Int32 fromIndex = 0 ) const
{
assert( fromIndex >= 0 && fromIndex <= pData->length );
sal_Int32 ret = rtl_ustr_indexOfStr_WithLength( pData->buffer+fromIndex, pData->length-fromIndex,
str.data(), str.length() );
return (ret < 0 ? ret : ret+fromIndex);
}
#else
sal_Int32 indexOf( const OUString & str, sal_Int32 fromIndex = 0 ) const
{
assert( fromIndex >= 0 && fromIndex <= pData->length );
sal_Int32 ret = rtl_ustr_indexOfStr_WithLength( pData->buffer+fromIndex, pData->length-fromIndex,
str.pData->buffer, str.pData->length );
return (ret < 0 ? ret : ret+fromIndex);
}
#endif
/**
@overload
This function accepts an ASCII string literal as its argument.
@since LibreOffice 4.0
*/
template< typename T >
typename libreoffice_internal::ConstCharArrayDetector< T, sal_Int32 >::Type indexOf( T& literal, sal_Int32 fromIndex = 0 ) const
{
assert(
libreoffice_internal::ConstCharArrayDetector<T>::isValid(literal));
sal_Int32 n = rtl_ustr_indexOfAscii_WithLength(
pData->buffer + fromIndex, pData->length - fromIndex,
libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length);
return n < 0 ? n : n + fromIndex;
}
#if defined LIBO_INTERNAL_ONLY
/** @overload @since LibreOffice 5.3 */
template<typename T>
typename
libreoffice_internal::ConstCharArrayDetector<T, sal_Int32>::TypeUtf16
indexOf(T & literal, sal_Int32 fromIndex = 0) const {
return indexOf(
std::u16string_view(libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length),
fromIndex);
}
#endif
/**
Returns the index within this string of the last occurrence of
the specified substring, searching backward starting at the end.
The returned index indicates the starting index of the substring
in this string.
If str doesn't include any character, always -1 is
returned. This is also the case, if both strings are empty.
@since LibreOffice 4.0
@param str the substring to search for.
@return If the string argument occurs one or more times as a substring
within this string, then the index of the first character of
the last such substring is returned. If it does not occur as
a substring, -1 is returned.
*/
#if defined LIBO_INTERNAL_ONLY
sal_Int32 lastIndexOf( std::u16string_view str ) const
{
return rtl_ustr_lastIndexOfStr_WithLength( pData->buffer, pData->length,
str.data(), str.length() );
}
#else
sal_Int32 lastIndexOf( const OUString & str ) const
{
return rtl_ustr_lastIndexOfStr_WithLength( pData->buffer, pData->length,
str.pData->buffer, str.pData->length );
}
#endif
/**
Returns the index within this string of the last occurrence of
the specified substring, searching backward starting before the specified
index.
The returned index indicates the starting index of the substring
in this string.
If str doesn't include any character, always -1 is
returned. This is also the case, if both strings are empty.
@since LibreOffice 4.0
@param str the substring to search for.
@param fromIndex the index before which to start the search.
@return If the string argument occurs one or more times as a substring
within this string before the starting index, then the index
of the first character of the last such substring is
returned. Otherwise, -1 is returned.
*/
#if defined LIBO_INTERNAL_ONLY
sal_Int32 lastIndexOf( std::u16string_view str, sal_Int32 fromIndex ) const
{
assert( fromIndex >= 0 && fromIndex <= pData->length );
return rtl_ustr_lastIndexOfStr_WithLength( pData->buffer, fromIndex,
str.data(), str.length() );
}
#else
sal_Int32 lastIndexOf( const OUString & str, sal_Int32 fromIndex ) const
{
assert( fromIndex >= 0 && fromIndex <= pData->length );
return rtl_ustr_lastIndexOfStr_WithLength( pData->buffer, fromIndex,
str.pData->buffer, str.pData->length );
}
#endif
/**
@overload
This function accepts an ASCII string literal as its argument.
@since LibreOffice 4.0
*/
template< typename T >
typename libreoffice_internal::ConstCharArrayDetector< T, sal_Int32 >::Type lastIndexOf( T& literal ) const
{
assert(
libreoffice_internal::ConstCharArrayDetector<T>::isValid(literal));
return rtl_ustr_lastIndexOfAscii_WithLength(
pData->buffer, pData->length,
libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length);
}
#if defined LIBO_INTERNAL_ONLY
/** @overload @since LibreOffice 5.3 */
template<typename T>
typename
libreoffice_internal::ConstCharArrayDetector<T, sal_Int32>::TypeUtf16
lastIndexOf(T & literal) const {
return lastIndexOf(
std::u16string_view(libreoffice_internal::ConstCharArrayDetector<T>::toPointer(literal),
libreoffice_internal::ConstCharArrayDetector<T>::length));
}
#endif
/**
Strip the given character from the start of the buffer.
@since LibreOffice 4.0
@param c the character to strip
@return The number of characters stripped
*/
sal_Int32 stripStart(sal_Unicode c = ' ')
{
sal_Int32 index;
for(index = 0; index < getLength() ; index++)
{
if(pData->buffer[ index ] != c)
{
break;
}
}
if(index)
{
remove(0, index);
}
return index;
}
/**
Strip the given character from the end of the buffer.
@since LibreOffice 4.0
@param c the character to strip
@return The number of characters stripped
*/
sal_Int32 stripEnd(sal_Unicode c = ' ')
{
sal_Int32 result = getLength();
sal_Int32 index;
for(index = getLength(); index > 0 ; index--)
{
if(pData->buffer[ index - 1 ] != c)
{
break;
}
}
if(index < getLength())
{
truncate(index);
}
return result - getLength();
}
/**
Strip the given character from the both end of the buffer.
@since LibreOffice 4.0
@param c the character to strip
@return The number of characters stripped
*/
sal_Int32 strip(sal_Unicode c = ' ')
{
return stripStart(c) + stripEnd(c);
}
#if defined LIBO_INTERNAL_ONLY
/**
Returns a std::u16string_view that is a view of a substring of this string.
The substring begins at the specified beginIndex. If
beginIndex is negative or be greater than the length of
this string, behaviour is undefined.
@param beginIndex the beginning index, inclusive.
@return the specified substring.
*/
SAL_WARN_UNUSED_RESULT std::u16string_view subView( sal_Int32 beginIndex ) const
{
assert(beginIndex >= 0);
assert(beginIndex <= getLength());
return subView(beginIndex, getLength() - beginIndex);
}
/**
Returns a std::u16string_view that is a view of a substring of this string.
The substring begins at the specified beginIndex and contains count
characters. If either beginIndex or count are negative,
or beginIndex + count are greater than the length of this string
then behaviour is undefined.
@param beginIndex the beginning index, inclusive.
@param count the number of characters.
@return the specified substring.
*/
SAL_WARN_UNUSED_RESULT std::u16string_view subView( sal_Int32 beginIndex, sal_Int32 count ) const
{
assert(beginIndex >= 0);
assert(count >= 0);
assert(beginIndex <= getLength());
assert(count <= getLength() - beginIndex);
return std::u16string_view(pData->buffer, sal_uInt32(pData->length)).substr(beginIndex, count);
}
#endif
/**
Returns a new string buffer that is a substring of this string.
The substring begins at the specified beginIndex. If
beginIndex is negative or be greater than the length of
this string, behaviour is undefined.
@param beginIndex the beginning index, inclusive.
@return the specified substring.
@since LibreOffice 4.1
*/
OUStringBuffer copy( sal_Int32 beginIndex ) const
{
return copy( beginIndex, getLength() - beginIndex );
}
/**
Returns a new string buffer that is a substring of this string.
The substring begins at the specified beginIndex and contains count
characters. If either beginIndex or count are negative,
or beginIndex + count are greater than the length of this string
then behaviour is undefined.
@param beginIndex the beginning index, inclusive.
@param count the number of characters.
@return the specified substring.
@since LibreOffice 4.1
*/
OUStringBuffer copy( sal_Int32 beginIndex, sal_Int32 count ) const
{
assert(beginIndex >= 0 && beginIndex <= getLength());
assert(count >= 0 && count <= getLength() - beginIndex);
rtl_uString *pNew = NULL;
rtl_uStringbuffer_newFromStr_WithLength( &pNew, getStr() + beginIndex, count );
return OUStringBuffer( pNew, count + 16 );
}
private:
OUStringBuffer( rtl_uString * value, const sal_Int32 capacity )
{
pData = value;
nCapacity = capacity;
}
/**
A pointer to the data structure which contains the data.
*/
rtl_uString * pData;
/**
The len of the pData->buffer.
*/
sal_Int32 nCapacity;
};
#if defined LIBO_INTERNAL_ONLY
template<> struct ToStringHelper<OUStringBuffer> {
static std::size_t length(OUStringBuffer const & s) { return s.getLength(); }
sal_Unicode * operator()(sal_Unicode * buffer, OUStringBuffer const & s) const SAL_RETURNS_NONNULL
{ return addDataHelper(buffer, s.getStr(), s.getLength()); }
};
#endif
#if defined LIBO_INTERNAL_ONLY
// Define this here to avoid circular includes
inline OUString & OUString::operator+=( const OUStringBuffer & str ) &
{
// Call operator= if this is empty, otherwise rtl_uString_newConcat will attempt to
// acquire() the str.pData buffer, which is part of the OUStringBuffer mutable state.
if (isEmpty())
return operator=(str.toString());
else
return internalAppend(str.pData);
}
inline OUString const& OUString::unacquired(const OUStringBuffer& str)
{
return unacquired(&str.pData);
}
#endif
}
#ifdef RTL_STRING_UNITTEST
namespace rtl
{
typedef rtlunittest::OUStringBuffer OUStringBuffer;
}
#endif
#if defined LIBO_INTERNAL_ONLY && !defined RTL_STRING_UNITTEST
using ::rtl::OUStringBuffer;
#endif
#endif // INCLUDED_RTL_USTRBUF_HXX
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'remove' is required to be utilized.
↑ V530 The return value of function 'truncate' is required to be utilized.
↑ V690 The 'OUStringBuffer' class implements the move assignment operator, but lacks a move constructor. It is dangerous to use such a class.