/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */
 
#include <config_features.h>
#include <config_fuzzers.h>
 
#include <com/sun/star/util/SearchAlgorithms2.hpp>
#include <o3tl/any.hxx>
#include <vcl/graphicfilter.hxx>
#include <com/sun/star/sdb/DatabaseContext.hpp>
#include <com/sun/star/ui/dialogs/XFilePicker3.hpp>
#include <com/sun/star/ui/dialogs/XFilePickerControlAccess.hpp>
#include <com/sun/star/ui/dialogs/ExtendedFilePickerElementIds.hpp>
#include <com/sun/star/ui/dialogs/ListboxControlActions.hpp>
#include <com/sun/star/ui/dialogs/TemplateDescription.hpp>
#include <com/sun/star/linguistic2/XProofreadingIterator.hpp>
#include <com/sun/star/linguistic2/XDictionary.hpp>
#include <comphelper/propertyvalue.hxx>
#include <officecfg/Office/Common.hxx>
#include <SwCapObjType.hxx>
#include <SwStyleNameMapper.hxx>
#include <docary.hxx>
#include <hintids.hxx>
#include <SwRewriter.hxx>
#include <numrule.hxx>
#include <swundo.hxx>
#include <svl/PasswordHelper.hxx>
#include <svl/urihelper.hxx>
#include <sfx2/passwd.hxx>
#include <sfx2/sfxdlg.hxx>
#include <sfx2/filedlghelper.hxx>
#include <editeng/langitem.hxx>
#include <svx/linkwarn.hxx>
#include <svx/statusitem.hxx>
#include <svx/viewlayoutitem.hxx>
#include <svx/zoomslideritem.hxx>
#include <sfx2/lokhelper.hxx>
#include <sfx2/htmlmode.hxx>
#include <vcl/svapp.hxx>
#include <sfx2/app.hxx>
#include <sfx2/request.hxx>
#include <sfx2/bindings.hxx>
#include <editeng/lrspitem.hxx>
#include <unotools/localedatawrapper.hxx>
#include <unotools/syslocale.hxx>
#include <editeng/unolingu.hxx>
#include <vcl/weld/weld.hxx>
#include <editeng/tstpitem.hxx>
#include <sfx2/event.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/docfilt.hxx>
#include <sfx2/fcontnr.hxx>
#include <editeng/sizeitem.hxx>
#include <sfx2/dispatch.hxx>
#include <svl/whiter.hxx>
#include <svl/ptitem.hxx>
#include <sfx2/viewfrm.hxx>
#include <vcl/errinf.hxx>
#include <tools/hostfilter.hxx>
#include <tools/urlobj.hxx>
#include <svx/svdview.hxx>
#include <swtypes.hxx>
#include <swwait.hxx>
#include <redlndlg.hxx>
#include <view.hxx>
#include <uivwimp.hxx>
#include <docsh.hxx>
#include <doc.hxx>
#include <printdata.hxx>
#include <IDocumentDeviceAccess.hxx>
#include <IDocumentRedlineAccess.hxx>
#include <DocumentRedlineManager.hxx>
#include <IDocumentUndoRedo.hxx>
#include <IDocumentSettingAccess.hxx>
#include <IDocumentDrawModelAccess.hxx>
#include <IDocumentStatistics.hxx>
#include <IDocumentOutlineNodes.hxx>
#include <wrtsh.hxx>
#include <viewopt.hxx>
#include <basesh.hxx>
#include <swmodule.hxx>
#include <uitool.hxx>
#include <shellio.hxx>
#include <fmtinfmt.hxx>
#include <mdiexp.hxx>
#include <drawbase.hxx>
#include <frmatr.hxx>
#include <frmmgr.hxx>
#include <pagedesc.hxx>
#include <section.hxx>
#include <tox.hxx>
#include <edtwin.hxx>
#include <wview.hxx>
#include <cmdid.h>
#include <sfx2/strings.hrc>
#include <sfx2/sfxresid.hxx>
#include <strings.hrc>
#include <swerror.h>
#include <globals.hrc>
#include <fmtclds.hxx>
#include <sfx2/templatedlg.hxx>
#include <dbconfig.hxx>
#include <dbmgr.hxx>
#include <reffld.hxx>
#include <comphelper/lok.hxx>
#include <comphelper/string.hxx>
#include <comphelper/docpasswordhelper.hxx>
#include <svtools/strings.hrc>
#include <svtools/svtresid.hxx>
 
#include <PostItMgr.hxx>
 
#include <comphelper/processfactory.hxx>
#include <LibreOfficeKit/LibreOfficeKitEnums.h>
 
#include <svx/svxdlg.hxx>
#include <swabstdlg.hxx>
#include <fmthdft.hxx>
#include <unotextrange.hxx>
#include <docstat.hxx>
#include <wordcountdialog.hxx>
#include <OnlineAccessibilityCheck.hxx>
#include <sfx2/sidebar/Sidebar.hxx>
 
#include <vcl/GraphicNativeTransform.hxx>
#include <vcl/GraphicNativeMetadata.hxx>
#include <vcl/settings.hxx>
#include <i18nutil/searchopt.hxx>
#include <osl/diagnose.h>
#include <paratr.hxx>
#include <rootfrm.hxx>
#include <frameformats.hxx>
 
#include <viewimp.hxx>
#include <pagefrm.hxx>
 
#include <memory>
#include <string_view>
#include <svl/slstitm.hxx>
 
#include <basegfx/utils/zoomtools.hxx>
 
#include <ndtxt.hxx>
#include <grfatr.hxx>
 
#include <svx/srchdlg.hxx>
#include <o3tl/string_view.hxx>
 
#include <svx/dialog/gotodlg.hxx>
 
#include <set>
 
const char sStatusDelim[] = " : ";
 
using namespace sfx2;
using namespace ::com::sun::star;
using namespace ::com::sun::star::util;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::lang;
using namespace ::com::sun::star::scanner;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::container;
using namespace ::com::sun::star::sdb;
using namespace ::com::sun::star::ui::dialogs;
 
namespace {
 
class SwNumberInputDlg : public SfxDialogController
{
private:
    std::unique_ptr<weld::Label> m_xLabel1;
    std::unique_ptr<weld::SpinButton> m_xSpinButton;
    std::unique_ptr<weld::Label> m_xLabel2;
    std::unique_ptr<weld::Button> m_xOKButton;
 
    DECL_LINK(InputModifiedHdl, weld::Entry&, void);
public:
    SwNumberInputDlg(weld::Window* pParent, const OUString& rTitle,
        const OUString& rLabel1, const sal_Int64 nValue, const sal_Int64 min, const sal_Int64 max,
        const OUString& rLabel2 = OUString())
        : SfxDialogController(pParent, u"modules/swriter/ui/numberinput.ui"_ustr, u"NumberInputDialog"_ustr)
        , m_xLabel1(m_xBuilder->weld_label(u"label1"_ustr))
        , m_xSpinButton(m_xBuilder->weld_spin_button(u"spinbutton"_ustr))
        , m_xLabel2(m_xBuilder->weld_label(u"label2"_ustr))
        , m_xOKButton(m_xBuilder->weld_button(u"ok"_ustr))
    {
        m_xDialog->set_title(rTitle);
        m_xLabel1->set_label(rLabel1);
        m_xSpinButton->set_value(nValue);
        m_xSpinButton->set_range(min, max);
        m_xSpinButton->set_position(-1);
        m_xSpinButton->select_region(0, -1);
        m_xSpinButton->connect_changed(LINK(this, SwNumberInputDlg, InputModifiedHdl));
        if (!rLabel2.isEmpty())
        {
            m_xLabel2->set_label(rLabel2);
            m_xLabel2->show();
        }
    }
 
    auto GetNumber()
    {
        return m_xSpinButton->get_text().toInt32();
    }
};
 
IMPL_LINK_NOARG(SwNumberInputDlg, InputModifiedHdl, weld::Entry&, void)
{
    m_xOKButton->set_sensitive(!m_xSpinButton->get_text().isEmpty());
    if (!m_xOKButton->get_sensitive())
        return;
 
    auto nValue = m_xSpinButton->get_text().toInt32();
    if (nValue <= m_xSpinButton->get_min())
        m_xSpinButton->set_value(m_xSpinButton->get_min());
    else if (nValue > m_xSpinButton->get_max())
        m_xSpinButton->set_value(m_xSpinButton->get_max());
    else
        m_xSpinButton->set_value(nValue);
 
    m_xSpinButton->set_position(-1);
}
 
}
 
static void lcl_SetAllTextToDefaultLanguage( SwWrtShell &rWrtSh, TypedWhichId<SvxLanguageItem> nWhichId )
{
    if (!(nWhichId == RES_CHRATR_LANGUAGE ||
          nWhichId == RES_CHRATR_CJK_LANGUAGE ||
          nWhichId == RES_CHRATR_CTL_LANGUAGE))
        return;
 
    rWrtSh.StartAction();
    rWrtSh.LockView( true );
    rWrtSh.Push();
 
    // prepare to apply new language to all text in document
    rWrtSh.SelAll();
    rWrtSh.ExtendedSelectAll();
 
    // set language attribute to default for all text
    rWrtSh.ResetAttr({ nWhichId });
 
    rWrtSh.Pop(SwCursorShell::PopMode::DeleteCurrent);
    rWrtSh.LockView( false );
    rWrtSh.EndAction();
 
}
 
/**
 * Create string for showing the page number in the statusbar
 *
 * @param nPhyNum  The physical page number
 * @param nVirtNum The logical page number (user-assigned)
 * @param rPgStr   User-defined page name (will be shown if different from logical page number)
 *
 * @return OUString Formatted string: Page 1 of 10 (Page 1 of 8 to print OR Page nVirtNumv/rPgStr)
 **/
OUString SwView::GetPageStr(sal_uInt16 nPhyNum, sal_uInt16 nVirtNum, const OUString& rPgStr)
{
    // Show user-defined page number in brackets if any.
    OUString extra;
    if (!rPgStr.isEmpty() && std::u16string_view(OUString::number(nPhyNum)) != rPgStr)
        extra = rPgStr;
    else if (nPhyNum != nVirtNum)
        extra = OUString::number(nVirtNum);
 
    sal_uInt16 nPageCount = GetWrtShell().GetPageCnt();
    sal_uInt16 nPrintedPhyNum = nPhyNum;
    sal_uInt16 nPrintedPageCount = nPageCount;
    if (!GetWrtShell().getIDocumentDeviceAccess().getPrintData().IsPrintEmptyPages())
        SwDoc::CalculateNonBlankPages(*m_pWrtShell->GetLayout(), nPrintedPageCount, nPrintedPhyNum);
    // Show printed page numbers only, when they are different
    OUString aStr( nPageCount != nPrintedPageCount
                    ? SwResId(STR_PAGE_COUNT_PRINTED)
                    : (extra.isEmpty() ? SwResId(STR_PAGE_COUNT) : SwResId(STR_PAGE_COUNT_CUSTOM)));
    aStr = aStr.replaceFirst("%1", OUString::number(nPhyNum));
    if (nPageCount != nPrintedPageCount)
    {
        aStr = aStr.replaceFirst("%2", OUString::number(nPageCount));
        aStr = aStr.replaceFirst("%3", OUString::number(nPrintedPhyNum));
        aStr = aStr.replaceFirst("%4", OUString::number(nPrintedPageCount));
    }
    else {
        if (extra.isEmpty())
            aStr = aStr.replaceFirst("%2", OUString::number(nPageCount));
        else
        {
            aStr = aStr.replaceFirst("%2", extra);
            aStr = aStr.replaceFirst("%3", OUString::number(nPageCount));
        }
    }
 
    return aStr;
}
 
ErrCode SwView::InsertGraphic( const OUString &rPath, const OUString &rFilter,
                                bool bLink, GraphicFilter *pFilter )
{
    SwWait aWait( *GetDocShell(), true );
 
    Graphic aGraphic;
    ErrCode aResult = ERRCODE_NONE;
    if( !pFilter )
    {
        pFilter = &GraphicFilter::GetGraphicFilter();
    }
 
    if (comphelper::LibreOfficeKit::isActive())
    {
        INetURLObject aURL(rPath);
        if (INetProtocol::File != aURL.GetProtocol() && HostFilter::isForbidden(aURL.GetHost()))
            SfxLokHelper::sendNetworkAccessError("insert");
    }
 
    auto xHandler(GetDocShell()->GetMedium()->GetInteractionHandler());
    aResult = GraphicFilter::LoadGraphic(rPath, rFilter, aGraphic, pFilter, nullptr, xHandler);
 
    if( ERRCODE_NONE == aResult )
    {
        Degree10 aRotation;
        GraphicNativeMetadata aMetadata;
        if ( aMetadata.read(aGraphic) )
            aRotation = aMetadata.getRotation();
 
        SwWrtShell& rShell = GetWrtShell();
        SwFlyFrameAttrMgr aFrameManager( true, &rShell, Frmmgr_Type::GRF, nullptr );
 
        // #i123922# determine if we really want to insert or replace the graphic at a selected object
        const bool bReplaceMode(rShell.HasSelection() && SelectionType::Frame == rShell.GetSelectionType());
 
        if(bReplaceMode)
        {
            // #i123922# Do same as in D&D, ReRead graphic and all is done
            rShell.ReRead(
                bLink ? rPath : OUString(),
                bLink ? rFilter : OUString(),
                &aGraphic);
        }
        else
        {
            rShell.StartAction();
            if( bLink )
            {
                SwDocShell* pDocSh = GetDocShell();
                INetURLObject aTemp(
                    pDocSh->HasName() ?
                        pDocSh->GetMedium()->GetURLObject().GetMainURL( INetURLObject::DecodeMechanism::NONE ) :
                        OUString());
 
                OUString sURL = URIHelper::SmartRel2Abs(
                    aTemp, rPath, URIHelper::GetMaybeFileHdl() );
                aGraphic.setOriginURL(sURL);
                rShell.InsertGraphic( sURL, rFilter, aGraphic, &aFrameManager );
            }
            else
            {
                rShell.InsertGraphic( OUString(), OUString(), aGraphic, &aFrameManager );
            }
 
            if (aRotation)
            {
                SfxItemSetFixed<RES_GRFATR_ROTATION, RES_GRFATR_ROTATION> aSet( rShell.GetAttrPool() );
                rShell.GetCurAttr( aSet );
                const SwRotationGrf& rRotation = aSet.Get(RES_GRFATR_ROTATION);
                aFrameManager.SetRotation(rRotation.GetValue(), aRotation, rRotation.GetUnrotatedSize());
            }
 
            // it is too late after "EndAction" because the Shell can already be destroyed.
            rShell.EndAction();
        }
    }
    return aResult;
}
 
bool SwView::InsertGraphicDlg( SfxRequest& rReq )
{
    bool bReturn = false;
    SwDocShell* pDocShell = GetDocShell();
    SwDoc* pDoc = pDocShell->GetDoc();
 
    UIName sGraphicFormat( SwResId(STR_POOLFRM_GRAPHIC) );
 
    const SfxStringItem* pName = rReq.GetArg(SID_INSERT_GRAPHIC);
    bool bShowError = !pName;
 
    // No file pickers in a non-desktop (mobile app) build.
 
#if HAVE_FEATURE_DESKTOP
    // when in HTML mode insert only as a link
    const sal_uInt16 nHtmlMode = ::GetHtmlMode(pDocShell);
 
    if (!pName && !Application::IsHeadlessModeEnabled())
    {
        std::unique_ptr<FileDialogHelper> pFileDlg(new FileDialogHelper(
            ui::dialogs::TemplateDescription::FILEOPEN_LINK_PREVIEW_IMAGE_TEMPLATE,
            FileDialogFlags::Graphic, GetFrameWeld()));
        pFileDlg->SetTitle(SwResId(STR_INSERT_GRAPHIC ));
        pFileDlg->SetContext( FileDialogHelper::WriterInsertImage );
 
        uno::Reference < XFilePicker3 > xFP = pFileDlg->GetFilePicker();
        uno::Reference < XFilePickerControlAccess > xCtrlAcc(xFP, UNO_QUERY);
        if(nHtmlMode & HTMLMODE_ON)
        {
            xCtrlAcc->setValue( ExtendedFilePickerElementIds::CHECKBOX_LINK, 0, Any(true));
            xCtrlAcc->enableControl( ExtendedFilePickerElementIds::CHECKBOX_LINK, false);
        }
 
        std::vector<OUString> aFormats;
        for( const auto& pSwFrameFormat : (*pDoc->GetFrameFormats()) )
        {
            const SwFrameFormat* pFormat = pSwFrameFormat;
            if(pFormat->IsDefault() || pFormat->IsAuto())
                continue;
            aFormats.push_back(pFormat->GetName().toString());
        }
 
        // pool formats
 
        const std::vector<OUString>& rFramePoolArr(
                SwStyleNameMapper::GetFrameFormatUINameArray());
        for(const auto & i : rFramePoolArr)
        {
            aFormats.push_back(i);
        }
 
        std::sort(aFormats.begin(), aFormats.end());
        aFormats.erase(std::unique(aFormats.begin(), aFormats.end()), aFormats.end());
 
        Sequence<OUString> aListBoxEntries(aFormats.size());
        OUString* pEntries = aListBoxEntries.getArray();
        sal_Int16 nSelect = 0;
        sal_Int16 i = 0;
        for( const auto& a : aFormats )
        {
            pEntries[i] = a;
            if(pEntries[i] == sGraphicFormat)
                nSelect = i;
            ++i;
        }
        try
        {
            Any aTemplates(&aListBoxEntries, cppu::UnoType<decltype(aListBoxEntries)>::get());
 
            xCtrlAcc->setValue( ExtendedFilePickerElementIds::LISTBOX_IMAGE_TEMPLATE,
                ListboxControlActions::ADD_ITEMS , aTemplates );
 
            Any aSelectPos(&nSelect, cppu::UnoType<decltype(nSelect)>::get());
            xCtrlAcc->setValue( ExtendedFilePickerElementIds::LISTBOX_IMAGE_TEMPLATE,
                ListboxControlActions::SET_SELECT_ITEM, aSelectPos );
        }
        catch (const Exception&)
        {
            OSL_FAIL("control access failed");
        }
 
        // execute file dialog, without capturing mouse (tdf#156033)
        vcl::Window* pWin = GetWindow();
        const bool bMouseCaptured = pWin && pWin->IsMouseCaptured();
        if (bMouseCaptured)
            pWin->ReleaseMouse();
        bool bHaveName =  ERRCODE_NONE == pFileDlg->Execute();
        if (bMouseCaptured)
            pWin->CaptureMouse();
        if (bHaveName)
        {
            rReq.AppendItem(SfxStringItem(SID_INSERT_GRAPHIC, pFileDlg->GetPath()));
            rReq.AppendItem(SfxStringItem(FN_PARAM_FILTER, pFileDlg->GetCurrentFilter()));
            pName = rReq.GetArg(SID_INSERT_GRAPHIC);
 
            bool bAsLink = false;
            if(nHtmlMode & HTMLMODE_ON)
                bAsLink = true;
            else
            {
                try
                {
                    Any aVal = xCtrlAcc->getValue( ExtendedFilePickerElementIds::CHECKBOX_LINK, 0);
                    OSL_ENSURE(aVal.hasValue(), "Value CBX_INSERT_AS_LINK not found");
                    bAsLink = !aVal.hasValue() || *o3tl::doAccess<bool>(aVal);
                    Any aTemplateValue = xCtrlAcc->getValue(
                        ExtendedFilePickerElementIds::LISTBOX_IMAGE_TEMPLATE,
                        ListboxControlActions::GET_SELECTED_ITEM );
                    OUString sTmpl;
                    aTemplateValue >>= sTmpl;
                    rReq.AppendItem( SfxStringItem( FN_PARAM_2, sTmpl) );
                }
                catch (const Exception&)
                {
                    OSL_FAIL("control access failed");
                }
            }
            rReq.AppendItem( SfxBoolItem( FN_PARAM_1, bAsLink ) );
        }
    }
#endif
    if (pName)
    {
        OUString aFileName = pName->GetValue();
        OUString aFilterName;
        if (const SfxStringItem* pFilter = rReq.GetArg(FN_PARAM_FILTER))
            aFilterName = pFilter->GetValue();
        bool bAsLink = false;
        if (const SfxBoolItem* pAsLink = rReq.GetArg<SfxBoolItem>(FN_PARAM_1))
            bAsLink = pAsLink->GetValue();
        if (const SfxStringItem* pStyle = rReq.GetArg<SfxStringItem>(FN_PARAM_2);
            pStyle && !pStyle->GetValue().isEmpty())
            sGraphicFormat = UIName(pStyle->GetValue());
 
#if HAVE_FEATURE_DESKTOP
        if( nHtmlMode & HTMLMODE_ON )
            bAsLink = true;
        else
        {
            // really store as link only?
            if (bAsLink && bShowError
                && officecfg::Office::Common::Misc::ShowLinkWarningDialog::get())
            {
                SvxLinkWarningDialog aWarnDlg(GetFrameWeld(), aFileName);
                if (aWarnDlg.run() != RET_OK)
                    bAsLink=false; // don't store as link
            }
        }
#endif
 
        SwWrtShell& rSh = GetWrtShell();
        rSh.LockPaint(LockPaintReason::InsertGraphic);
        rSh.StartAction();
 
        SwRewriter aRewriter;
        aRewriter.AddRule(UndoArg1, SwResId(STR_GRAPHIC_DEFNAME));
 
        // #i123922# determine if we really want to insert or replace the graphic at a selected object
        const bool bReplaceMode(rSh.HasSelection() && SelectionType::Frame == rSh.GetSelectionType());
 
        rSh.StartUndo(SwUndoId::INSERT, &aRewriter);
 
        ErrCode nError = InsertGraphic( aFileName, aFilterName, bAsLink, &GraphicFilter::GetGraphicFilter() );
 
        // format not equal to current filter (with autodetection)
        if( nError == ERRCODE_GRFILTER_FORMATERROR )
            nError = InsertGraphic( aFileName, OUString(), bAsLink, &GraphicFilter::GetGraphicFilter() );
 
        // #i123922# no new FrameFormat for replace mode, only when new object was created,
        // else this would reset the current setting for the frame holding the graphic
        if ( !bReplaceMode && rSh.IsFrameSelected() )
        {
            SwFrameFormat* pFormat = pDoc->FindFrameFormatByName( sGraphicFormat );
            if(!pFormat)
                pFormat = pDoc->MakeFrameFormat(sGraphicFormat,
                                        pDocShell->GetDoc()->GetDfltFrameFormat(),
                                        false);
            rSh.SetFrameFormat( pFormat );
        }
 
        TranslateId pResId;
        if( nError == ERRCODE_GRFILTER_OPENERROR )
            pResId = STR_GRFILTER_OPENERROR;
        else if( nError == ERRCODE_GRFILTER_IOERROR )
            pResId = STR_GRFILTER_IOERROR;
        else if( nError ==ERRCODE_GRFILTER_FORMATERROR )
            pResId = STR_GRFILTER_FORMATERROR;
        else if( nError ==ERRCODE_GRFILTER_VERSIONERROR )
            pResId = STR_GRFILTER_VERSIONERROR;
        else if( nError ==ERRCODE_GRFILTER_FILTERERROR )
            pResId = STR_GRFILTER_FILTERERROR;
        else if( nError ==ERRCODE_GRFILTER_TOOBIG )
            pResId = STR_GRFILTER_TOOBIG;
 
        rSh.EndAction();
        rSh.UnlockPaint();
        if (pResId)
        {
            if( bShowError )
            {
                std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetFrameWeld(),
                                                              VclMessageType::Info, VclButtonsType::Ok,
                                                              SwResId(pResId)));
                xInfoBox->run();
            }
            rReq.Ignore();
        }
        else
        {
            // set the specific graphic attributes to the graphic
            bReturn = true;
            AutoCaption( GRAPHIC_CAP );
            rReq.Done();
        }
 
        rSh.EndUndo(); // due to possible change of Shell
    }
 
    return bReturn;
}
 
void SwView::Execute(SfxRequest &rReq)
{
    const sal_uInt16 nSlot = rReq.GetSlot();
    const SfxItemSet* pArgs = rReq.GetArgs();
    const SfxPoolItem* pItem;
    bool bIgnore = false;
    switch( nSlot )
    {
        case SID_CREATE_SW_DRAWVIEW:
            m_pWrtShell->getIDocumentDrawModelAccess().GetOrCreateDrawModel();
            break;
 
        case FN_LINE_NUMBERING_DLG:
        {
            SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
            ScopedVclPtr<VclAbstractDialog> pDlg(pFact->CreateVclSwViewDialog(*this));
            VclAbstractDialog::AsyncContext aContext;
            aContext.maEndDialogFn = [](sal_Int32){};
            pDlg->StartExecuteAsync(aContext);
            break;
        }
        case FN_EDIT_LINK_DLG:
            EditLinkDlg();
            break;
        case SID_REFRESH_VIEW:
            GetEditWin().Invalidate();
            m_pWrtShell->Reformat();
            break;
        case FN_PAGEUP:
        case FN_PAGEUP_SEL:
        case FN_PAGEDOWN:
        case FN_PAGEDOWN_SEL:
        {
            tools::Rectangle aVis( GetVisArea() );
            SwEditWin& rTmpWin = GetEditWin();
            if ( FN_PAGEUP == nSlot || FN_PAGEUP_SEL == nSlot )
                PageUpCursor(FN_PAGEUP_SEL == nSlot);
            else
                PageDownCursor(FN_PAGEDOWN_SEL == nSlot);
 
            rReq.SetReturnValue(SfxBoolItem(nSlot,
                                                aVis != GetVisArea()));
            //#i42732# - notify the edit window that from now on we do not use the input language
            rTmpWin.SetUseInputLanguage( false );
        }
        break;
        case SID_ZOOM_IN:
        case SID_ZOOM_OUT:
        {
            sal_uInt16 nFact = m_pWrtShell->GetViewOptions()->GetZoom();
            if (SID_ZOOM_IN == nSlot)
                nFact = basegfx::zoomtools::zoomIn(nFact);
            else
                nFact = basegfx::zoomtools::zoomOut(nFact);
            SetZoom(SvxZoomType::PERCENT, nFact);
        }
        break;
        case FN_TO_PREV_PAGE:
        case FN_TO_NEXT_PAGE:
        {
            sal_uInt16 nPage = 0;
            if (m_pWrtShell->IsCursorVisible())
                nPage = m_pWrtShell->GetCursor()->GetPageNum();
            else
            {
                SwFrame* pPageFrame = m_pWrtShell->Imp()->GetFirstVisPage(m_pWrtShell->GetOut());
                if (pPageFrame)
                    nPage = pPageFrame->GetPhyPageNum();
            }
            if (nPage != 0)
            {
                sal_uInt16 nOldPage(nPage);
                if (FN_TO_PREV_PAGE == nSlot && nPage > 1)
                    nPage--;
                else if (FN_TO_NEXT_PAGE == nSlot && nPage < m_pWrtShell->GetPageCount())
                    nPage++;
                if (nPage != nOldPage)
                {
                    m_pWrtShell->LockPaint(LockPaintReason::GotoPage);
                    if (IsDrawMode())
                        LeaveDrawCreate();
                    m_pWrtShell->EnterStdMode();
                    m_pWrtShell->GotoPage(nPage, true);
                    // set visible area (borrowed from SwView::PhyPageUp/Down)
                    const Point aPt(m_aVisArea.Left(), m_pWrtShell->GetPagePos(nPage).Y());
                    Point aAlPt(AlignToPixel(aPt));
                    if(aPt.Y() != aAlPt.Y())
                        aAlPt.AdjustY(3 * GetEditWin().PixelToLogic(Size(0, 1)).Height());
                    SetVisArea(aAlPt);
                    m_pWrtShell->UnlockPaint();
                }
            }
        }
        break;
        case FN_SELECTION_CYCLE:
        {
            if (m_pWrtShell->IsSelFrameMode())
                break;
            if (!m_pWrtShell->IsStdMode())
                m_pWrtShell->EnterStdMode();
            SwShellCursor *pCursor = m_pWrtShell->SwCursorShell::GetCursor_();
            Point CurrMarkPt = pCursor->GetMkPos();
            Point CurrPointPt = pCursor->GetPtPos();
            sal_uInt16 nStep = m_aSelectCycle.nStep;
            if (nStep && (CurrMarkPt != m_aSelectCycle.m_MarkPt || CurrPointPt != m_aSelectCycle.m_PointPt))
                nStep = 0;
            switch(nStep)
            {
                case 0:
                    m_aSelectCycle.m_pInitialCursor = CurrPointPt;
                    m_pWrtShell->SwCursorShell::ClearMark();
                    m_pWrtShell->SelWrd(&CurrPointPt);
                    break;
                case 1:
                    m_pWrtShell->SelSentence(&CurrPointPt);
                    break;
                case 2:
                    m_pWrtShell->SelPara(&CurrPointPt);
                    break;
                case 3:
                    m_pWrtShell->SwCursorShell::ClearMark();
                    m_pWrtShell->SwCursorShell::SetCursor(m_aSelectCycle.m_pInitialCursor);
                    break;
            }
            nStep++;
            nStep %= 4;
            pCursor = m_pWrtShell->SwCursorShell::GetCursor_();
            m_aSelectCycle.m_MarkPt = pCursor->GetMkPos();
            m_aSelectCycle.m_PointPt = pCursor->GetPtPos();
            m_aSelectCycle.nStep = nStep;
        }
        break;
        case FN_REDLINE_ON:
        case FN_TRACK_CHANGES_IN_THIS_VIEW:
        case FN_TRACK_CHANGES_IN_ALL_VIEWS:
        {
            std::optional<bool> oOn;
            if( pArgs &&
                SfxItemState::SET == pArgs->GetItemState(nSlot, false, &pItem ))
            {
                oOn = static_cast<const SfxBoolItem*>(pItem)->GetValue();
            }
            else if (nSlot == FN_TRACK_CHANGES_IN_THIS_VIEW || nSlot == FN_TRACK_CHANGES_IN_ALL_VIEWS)
            {
                oOn = true;
            }
 
            if (oOn.has_value())
            {
                IDocumentRedlineAccess& rIDRA = m_pWrtShell->getIDocumentRedlineAccess();
                Sequence <sal_Int8> aPasswd = rIDRA.GetRedlinePassword();
                if( aPasswd.hasElements() )
                {
                    OSL_ENSURE( !oOn.value(), "SwView::Execute(): password set and redlining off doesn't match!" );
 
                    // xmlsec05:    new password dialog
                    SfxPasswordDialog aPasswdDlg(GetFrameWeld());
                    aPasswdDlg.SetMinLen(1);
                    //#i69751# the result of Execute() can be ignored
                    (void)aPasswdDlg.run();
                    OUString sNewPasswd(aPasswdDlg.GetPassword());
 
                    // password verification
                    bool bPasswordOk = false;
                    if (aPasswd.getLength() == 1 && aPasswd[0] == 1)
                    {
                        // dummy RedlinePassword from OOXML import: get real password info
                        // from the grab-bag to verify the password
                        const css::uno::Sequence< css::beans::PropertyValue > aDocumentProtection =
                            static_cast<SfxObjectShell*>(GetDocShell())->
                                                   GetDocumentProtectionFromGrabBag();
 
                        bPasswordOk =
                            // password is ok, if there is no DocumentProtection in the GrabBag,
                            // i.e. the dummy RedlinePassword imported from an OpenDocument file
                            !aDocumentProtection.hasElements() ||
                            // verify password with the password info imported from OOXML
                            ::comphelper::DocPasswordHelper::IsModifyPasswordCorrect(sNewPasswd,
                                ::comphelper::DocPasswordHelper::ConvertPasswordInfo ( aDocumentProtection ) );
                    }
                    else
                    {
                        // the simplified RedlinePassword
                        Sequence <sal_Int8> aNewPasswd = rIDRA.GetRedlinePassword();
                        SvPasswordHelper::GetHashPassword( aNewPasswd, sNewPasswd );
                        bPasswordOk = SvPasswordHelper::CompareHashPassword(aPasswd, sNewPasswd);
                    }
 
                    if (bPasswordOk)
                        rIDRA.SetRedlinePassword(Sequence <sal_Int8> ());
                    else
                    {   // xmlsec05: message box for wrong password
                        std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(nullptr,
                                                      VclMessageType::Info, VclButtonsType::Ok,
                                                      SfxResId(RID_SVXSTR_INCORRECT_PASSWORD)));
                        xInfoBox->run();
                        break;
                    }
                }
 
                SwDocShell* pDocShell = GetDocShell();
                SfxRedlineRecordingMode eRedlineRecordingMode = SfxRedlineRecordingMode::AllViews;
                if (nSlot == FN_TRACK_CHANGES_IN_THIS_VIEW)
                {
                    eRedlineRecordingMode = SfxRedlineRecordingMode::ThisView;
                }
                pDocShell->SetChangeRecording( oOn.value(), /*bLockAllViews=*/true, eRedlineRecordingMode );
 
                // Notify all view shells of this document, as the track changes mode is document-global.
                for (SfxViewFrame* pViewFrame = SfxViewFrame::GetFirst(pDocShell); pViewFrame; pViewFrame = SfxViewFrame::GetNext(*pViewFrame, pDocShell))
                {
                    pViewFrame->GetBindings().Invalidate(FN_REDLINE_ON);
                    pViewFrame->GetBindings().Update(FN_REDLINE_ON);
                    pViewFrame->GetBindings().Invalidate(FN_TRACK_CHANGES_IN_THIS_VIEW);
                    pViewFrame->GetBindings().Update(FN_TRACK_CHANGES_IN_THIS_VIEW);
                    pViewFrame->GetBindings().Invalidate(FN_TRACK_CHANGES_IN_ALL_VIEWS);
                    pViewFrame->GetBindings().Update(FN_TRACK_CHANGES_IN_ALL_VIEWS);
                }
            }
        }
        break;
        case FN_REDLINE_PROTECT :
        {
            IDocumentRedlineAccess& rIDRA = m_pWrtShell->getIDocumentRedlineAccess();
            Sequence <sal_Int8> aPasswd = rIDRA.GetRedlinePassword();
            if( pArgs && SfxItemState::SET == pArgs->GetItemState(nSlot, false, &pItem )
                && static_cast<const SfxBoolItem*>(pItem)->GetValue() == aPasswd.hasElements() )
                break;
 
            // xmlsec05:    new password dialog
            //              message box for wrong password
            SfxPasswordDialog aPasswdDlg(GetFrameWeld());
            aPasswdDlg.SetMinLen(1);
            if (!aPasswd.hasElements())
                aPasswdDlg.ShowExtras(SfxShowExtras::CONFIRM);
            if (aPasswdDlg.run())
            {
                RedlineFlags nOn = RedlineFlags::On;
                OUString sNewPasswd(aPasswdDlg.GetPassword());
                Sequence <sal_Int8> aNewPasswd =
                        rIDRA.GetRedlinePassword();
                SvPasswordHelper::GetHashPassword( aNewPasswd, sNewPasswd );
                if(!aPasswd.hasElements())
                {
                    rIDRA.SetRedlinePassword(aNewPasswd);
                }
                else if(SvPasswordHelper::CompareHashPassword(aPasswd, sNewPasswd))
                {
                    rIDRA.SetRedlinePassword(Sequence <sal_Int8> ());
                    nOn = RedlineFlags::NONE;
                }
                const RedlineFlags nMode = rIDRA.GetRedlineFlags();
                m_pWrtShell->SetRedlineFlagsAndCheckInsMode( (nMode & ~RedlineFlags::On) | nOn);
                rReq.AppendItem( SfxBoolItem( FN_REDLINE_PROTECT, !(nMode&RedlineFlags::On) ) );
            }
            else
                bIgnore = true;
        }
        break;
        case FN_REDLINE_SHOW:
 
            if( pArgs &&
                SfxItemState::SET == pArgs->GetItemState(nSlot, false, &pItem))
            {
                // tdf#125754 avoid recursive layout
                // because all views share the layout, have to use AllAction
                const bool bShow = static_cast<const SfxBoolItem*>(pItem)->GetValue();
                m_pWrtShell->StartAllAction();
                // always show redline insertions in Hide Changes mode
                if ( m_pWrtShell->GetViewOptions()->IsShowChangesInMargin() &&
                     m_pWrtShell->GetViewOptions()->IsShowChangesInMargin2() )
                {
                    GetDocShell()->GetDoc()->GetDocumentRedlineManager().HideAll(/*bDeletion=*/!bShow);
                }
                m_pWrtShell->GetLayout()->SetHideRedlines( !bShow );
                m_pWrtShell->EndAllAction();
                if (m_pWrtShell->IsRedlineOn())
                    m_pWrtShell->SetInsMode();
                GetDocShell()->Broadcast(SfxHint(SfxHintId::SwRedlineShowChanged));
            }
            break;
        case FN_MAILMERGE_SENDMAIL_CHILDWINDOW:
        case FN_REDLINE_ACCEPT:
            GetViewFrame().ToggleChildWindow(nSlot);
        break;
        case FN_REDLINE_ACCEPT_DIRECT:
        case FN_REDLINE_REJECT_DIRECT:
        case FN_REDLINE_ACCEPT_TONEXT:
        case FN_REDLINE_REJECT_TONEXT:
        case FN_REDLINE_REINSTATE_DIRECT:
        case FN_REDLINE_REINSTATE_TONEXT:
        {
            SwDoc *pDoc = m_pWrtShell->GetDoc();
            SwPaM *pCursor = m_pWrtShell->GetCursor();
            const SwRedlineTable& rRedlineTable = pDoc->getIDocumentRedlineAccess().GetRedlineTable();
            SwRedlineTable::size_type nRedline = SwRedlineTable::npos;
            if (pArgs && pArgs->GetItemState(nSlot, false, &pItem) == SfxItemState::SET)
            {
                const sal_Int64 nChangeId = static_cast<const SfxUInt32Item*>(pItem)->GetValue();
                for (SwRedlineTable::size_type i = 0; i < rRedlineTable.size(); ++i)
                {
                    if (nChangeId == rRedlineTable[i]->GetId())
                        nRedline = i;
                }
            }
 
            if( pCursor->HasMark() && nRedline == SwRedlineTable::npos)
            {
                bool bAccept = FN_REDLINE_ACCEPT_DIRECT == nSlot || FN_REDLINE_ACCEPT_TONEXT == nSlot;
                bool bReinstate = nSlot == FN_REDLINE_REINSTATE_DIRECT || nSlot == FN_REDLINE_REINSTATE_TONEXT;
                SwUndoId eUndoId = bAccept ? SwUndoId::ACCEPT_REDLINE : SwUndoId::REJECT_REDLINE;
                SwWrtShell& rSh = GetWrtShell();
                SwRewriter aRewriter;
                bool bTableSelection = rSh.IsTableMode();
                if ( bTableSelection )
                {
                    aRewriter.AddRule(UndoArg1, SwResId( STR_REDLINE_TABLECHG ));
                    rSh.StartUndo( eUndoId, &aRewriter);
                }
                if ( bAccept )
                    m_pWrtShell->AcceptRedlinesInSelection();
                else if (bReinstate)
                {
                    m_pWrtShell->ReinstateRedlinesInSelection();
                }
                else
                    m_pWrtShell->RejectRedlinesInSelection();
                if ( bTableSelection )
                    rSh.EndUndo( eUndoId, &aRewriter);
            }
            else
            {
                // We check for a redline at the start of the selection/cursor, not the point.
                // This ensures we work properly with FN_REDLINE_NEXT_CHANGE, which leaves the
                // point at the *end* of the redline and the mark at the start (so GetRedline
                // would return NULL if called on the point)
                const SwRangeRedline* pRedline = nullptr;
                if (nRedline != SwRedlineTable::npos)
                {
                    // A redline was explicitly requested by specifying an
                    // index, don't guess based on the cursor position.
 
                    if (nRedline < rRedlineTable.size())
                        pRedline = rRedlineTable[nRedline];
                }
                else
                    pRedline = pDoc->getIDocumentRedlineAccess().GetRedline(*pCursor->Start(), &nRedline);
 
                // accept or reject table row deletion or insertion
                bool bTableChange = false;
                if ( !pRedline && m_pWrtShell->IsCursorInTable() )
                {
                    nRedline = 0;
                    auto pTabBox = pCursor->Start()->GetNode().GetTableBox();
                    auto pTabLine = pTabBox->GetUpper();
                    const SwTableNode* pTableNd = pCursor->Start()->GetNode().FindTableNode();
 
                    if ( RedlineType::None != pTabLine->GetRedlineType() )
                    {
                        nRedline = pTabLine->UpdateTextChangesOnly(nRedline);
 
                        if ( nRedline != SwRedlineTable::npos )
                        {
                            bTableChange = true;
 
                            SwWrtShell& rSh = GetWrtShell();
                            SwRewriter aRewriter;
 
                            aRewriter.AddRule(UndoArg1, SwResId(
                                rRedlineTable[nRedline]->GetType() == RedlineType::Delete
                                    ? STR_REDLINE_TABLE_ROW_DELETE
                                    : STR_REDLINE_TABLE_ROW_INSERT ));
 
                            SwUndoId eUndoId =
                                (FN_REDLINE_ACCEPT_DIRECT == nSlot || FN_REDLINE_ACCEPT_TONEXT == nSlot)
                                    ? SwUndoId::ACCEPT_REDLINE
                                    : SwUndoId::REJECT_REDLINE;
 
                            rSh.StartUndo( eUndoId, &aRewriter);
                            while ( nRedline != SwRedlineTable::npos && nRedline < rRedlineTable.size() )
                            {
                                pRedline = rRedlineTable[nRedline];
 
                                // until next redline is not in the same row
                                SwTableBox* pTableBox = pRedline->Start()->GetNode().GetTableBox();
                                if ( !pTableBox || pTableBox->GetUpper() != pTabLine )
                                    break;
 
                                if (FN_REDLINE_ACCEPT_DIRECT == nSlot || FN_REDLINE_ACCEPT_TONEXT == nSlot)
                                    m_pWrtShell->AcceptRedline(nRedline);
                                else
                                    m_pWrtShell->RejectRedline(nRedline);
                            }
                            rSh.EndUndo( eUndoId, &aRewriter);
                        }
                    }
                    else if ( RedlineType::None != pTabBox->GetRedlineType() )
                    {
                        nRedline = pTabBox->GetRedline();
 
                        if ( nRedline != SwRedlineTable::npos )
                        {
                            bTableChange = true;
 
                            SwWrtShell& rSh = GetWrtShell();
                            SwRewriter aRewriter;
 
                            aRewriter.AddRule(UndoArg1, SwResId(
                                rRedlineTable[nRedline]->GetType() == RedlineType::Delete
                                    ? STR_REDLINE_TABLE_COLUMN_DELETE
                                    : STR_REDLINE_TABLE_COLUMN_INSERT ));
 
                            SwUndoId eUndoId =
                                (FN_REDLINE_ACCEPT_DIRECT == nSlot || FN_REDLINE_ACCEPT_TONEXT == nSlot)
                                    ? SwUndoId::ACCEPT_REDLINE
                                    : SwUndoId::REJECT_REDLINE;
 
                            // change only the cells with the same data
                            SwRedlineData aData(rRedlineTable[nRedline]->GetRedlineData(0));
 
                            // start from the first redline of the table to handle all the
                            // cells of the changed column(s)
                            while ( nRedline )
                            {
                                pRedline = rRedlineTable[nRedline-1];
                                SwTableBox* pTableBox = pRedline->Start()->GetNode().GetTableBox();
                                SwTableNode* pTableNode = pRedline->Start()->GetNode().FindTableNode();
 
                                // previous redline is not in the same table
                                if ( !pTableBox || pTableNode != pTableNd )
                                    break;
 
                                --nRedline;
                            }
 
                            rSh.StartUndo( eUndoId, &aRewriter);
                            while ( nRedline != SwRedlineTable::npos && nRedline < rRedlineTable.size() )
                            {
                                pRedline = rRedlineTable[nRedline];
 
                                // until next redline is not in the same table
                                SwTableBox* pTableBox = pRedline->Start()->GetNode().GetTableBox();
                                SwTableNode* pTableNode = pRedline->Start()->GetNode().FindTableNode();
                                if ( !pTableBox || pTableNode != pTableNd )
                                    break;
 
                                // skip cells which are not from the same author, same type change
                                // or timestamp, i.e. keep only the cells of the same tracked
                                // column insertion or deletion
                                if ( !pRedline->GetRedlineData(0).CanCombine(aData) ||
                                     // not a tracked cell change
                                     RedlineType::None == pTableBox->GetRedlineType() )
                                {
                                    ++nRedline;
                                    continue;
                                }
 
                                if (FN_REDLINE_ACCEPT_DIRECT == nSlot || FN_REDLINE_ACCEPT_TONEXT == nSlot)
                                    m_pWrtShell->AcceptRedline(nRedline);
                                else
                                    m_pWrtShell->RejectRedline(nRedline);
                            }
                            rSh.EndUndo( eUndoId, &aRewriter);
                        }
                    }
                }
                else
                {
                    assert(pRedline != nullptr);
                }
 
                if (pRedline && !bTableChange)
                {
                    if (FN_REDLINE_ACCEPT_DIRECT == nSlot || FN_REDLINE_ACCEPT_TONEXT == nSlot)
                        m_pWrtShell->AcceptRedline(nRedline);
                    else if (nSlot == FN_REDLINE_REINSTATE_DIRECT || nSlot == FN_REDLINE_REINSTATE_TONEXT)
                    {
                        m_pWrtShell->ReinstateRedline(nRedline);
                    }
                    else
                        m_pWrtShell->RejectRedline(nRedline);
                }
            }
            switch (nSlot)
            {
            case FN_REDLINE_ACCEPT_TONEXT:
            case FN_REDLINE_REJECT_TONEXT:
            case FN_REDLINE_REINSTATE_TONEXT:
                // Go to next change after accepting or rejecting one (tdf#101977)
                GetViewFrame().GetDispatcher()->Execute(FN_REDLINE_NEXT_CHANGE, SfxCallMode::ASYNCHRON);
            }
        }
        break;
 
        case FN_REDLINE_NEXT_CHANGE:
        {
            // If a parameter is provided, try going to the nth change, not to
            // the next one.
            SwDoc* pDoc = m_pWrtShell->GetDoc();
            const SwRedlineTable& rRedlineTable = pDoc->getIDocumentRedlineAccess().GetRedlineTable();
            SwRedlineTable::size_type nRedline = SwRedlineTable::npos;
            if (pArgs && pArgs->GetItemState(nSlot, false, &pItem) == SfxItemState::SET)
            {
                const sal_uInt32 nChangeId = static_cast<const SfxUInt32Item*>(pItem)->GetValue();
                for (SwRedlineTable::size_type i = 0; i < rRedlineTable.size(); ++i)
                {
                    if (nChangeId == rRedlineTable[i]->GetId())
                        nRedline = i;
                }
            }
 
            const SwRangeRedline *pNext = nullptr;
            if (nRedline < rRedlineTable.size())
                pNext = m_pWrtShell->GotoRedline(nRedline, true);
            else
                pNext = m_pWrtShell->SelNextRedline();
 
            if (pNext)
            {
                if (comphelper::LibreOfficeKit::isActive())
                {
                    sal_uInt32 nRedlineId = pNext->GetId();
                    OString aPayload(".uno:CurrentTrackedChangeId=" + OString::number(nRedlineId));
                    libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED, aPayload);
                }
 
                m_pWrtShell->SetInSelect();
            }
 
        }
        break;
 
        case FN_REDLINE_PREV_CHANGE:
        {
            const SwRangeRedline *pPrev = m_pWrtShell->SelPrevRedline();
 
            if (pPrev)
            {
                if (comphelper::LibreOfficeKit::isActive())
                {
                    sal_uInt32 nRedlineId = pPrev->GetId();
                    OString aPayload(".uno:CurrentTrackedChangeId=" + OString::number(nRedlineId));
                    libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED, aPayload);
                }
 
                m_pWrtShell->SetInSelect();
            }
        }
        break;
 
        case SID_DOCUMENT_COMPARE:
        case SID_DOCUMENT_MERGE:
            {
                OUString sFileName, sFilterName;
                sal_Int16 nVersion = 0;
                bool bHasFileName = false;
                m_pViewImpl->SetParam( 0 );
                bool bNoAcceptDialog = false;
 
                if( pArgs )
                {
                    if( const SfxStringItem* pFileItem = pArgs->GetItemIfSet( SID_FILE_NAME, false ))
                        sFileName = pFileItem->GetValue();
                    bHasFileName = !sFileName.isEmpty();
 
                    if( const SfxStringItem* pFilterNameItem = pArgs->GetItemIfSet( SID_FILTER_NAME, false ))
                        sFilterName = pFilterNameItem->GetValue();
 
                    if( const SfxInt16Item* pVersionItem = pArgs->GetItemIfSet( SID_VERSION, false ))
                    {
                        nVersion = pVersionItem->GetValue();
                        m_pViewImpl->SetParam( nVersion );
                    }
                    if( const SfxBoolItem* pDialogItem = pArgs->GetItemIfSet( SID_NO_ACCEPT_DIALOG, false ))
                    {
                        bNoAcceptDialog = pDialogItem->GetValue();
                    }
                }
 
                m_pViewImpl->InitRequest( rReq );
                tools::Long nFound = InsertDoc( nSlot, sFileName, sFilterName, nVersion );
 
                if ( bHasFileName )
                {
                    rReq.SetReturnValue( SfxInt32Item( nSlot, nFound ));
 
                    if (nFound > 0 && !bNoAcceptDialog) // show Redline browser
                    {
                        SfxViewFrame& rVFrame = GetViewFrame();
                        rVFrame.ShowChildWindow(FN_REDLINE_ACCEPT);
 
                        // re-initialize the Redline dialog
                        const sal_uInt16 nId = SwRedlineAcceptChild::GetChildWindowId();
                        SwRedlineAcceptChild *pRed = static_cast<SwRedlineAcceptChild*>(
                                                rVFrame.GetChildWindow(nId));
                        if (pRed)
                            pRed->ReInitDlg();
                    }
                }
                else
                    bIgnore = true;
            }
        break;
        case FN_SYNC_LABELS:
            GetViewFrame().ShowChildWindow(nSlot);
        break;
        case FN_ESCAPE:
        {
            if ( m_pWrtShell->HasDrawViewDrag() )
            {
                m_pWrtShell->BreakDrag();
                m_pWrtShell->EnterSelFrameMode();
            }
            else if ( m_pWrtShell->IsDrawCreate() )
            {
                GetDrawFuncPtr()->BreakCreate();
                AttrChangedNotify(nullptr); // shell change if needed
            }
            else if ( m_pWrtShell->HasSelection() || IsDrawMode() )
            {
                SdrView *pSdrView = m_pWrtShell->HasDrawView() ? m_pWrtShell->GetDrawView() : nullptr;
                if(pSdrView && pSdrView->GetMarkedObjectList().GetMarkCount() != 0 &&
                    pSdrView->GetHdlList().GetFocusHdl())
                {
                    const_cast<SdrHdlList&>(pSdrView->GetHdlList()).ResetFocusHdl();
                }
                else
                {
                    if(pSdrView)
                    {
                        LeaveDrawCreate();
                        Point aPt(LONG_MIN, LONG_MIN);
                        //go out of the frame
                        m_pWrtShell->SelectObj(aPt, SW_LEAVE_FRAME);
                        SfxBindings& rBind = GetViewFrame().GetBindings();
                        rBind.Invalidate( SID_ATTR_SIZE );
                    }
                    m_pWrtShell->EnterStdMode();
                    AttrChangedNotify(nullptr); // shell change if necessary
                }
            }
            else if ( GetEditWin().GetApplyTemplate() )
            {
                GetEditWin().SetApplyTemplate(SwApplyTemplate());
            }
            else if( static_cast<SfxObjectShell*>(GetDocShell())->IsInPlaceActive() )
            {
                Escape();
            }
            else if ( GetEditWin().IsChainMode() )
            {
                GetEditWin().SetChainMode( false );
            }
            else if( m_pWrtShell->GetFlyFrameFormat() )
            {
                const SwFrameFormat* pFormat = m_pWrtShell->GetFlyFrameFormat();
                if(m_pWrtShell->GotoFly( pFormat->GetName(), FLYCNTTYPE_FRM ))
                {
                    m_pWrtShell->HideCursor();
                    m_pWrtShell->EnterSelFrameMode();
                }
            }
            else
            {
                SfxBoolItem aItem( SID_WIN_FULLSCREEN, false );
                GetViewFrame().GetDispatcher()->ExecuteList(SID_WIN_FULLSCREEN,
                        SfxCallMode::RECORD, { &aItem });
                bIgnore = true;
            }
        }
        break;
        case SID_ATTR_BORDER_INNER:
        case SID_ATTR_BORDER_OUTER:
        case SID_ATTR_BORDER_SHADOW:
            if(pArgs)
                m_pWrtShell->SetAttrSet(*pArgs);
            break;
 
        case SID_ATTR_PAGE:
        case SID_ATTR_PAGE_SIZE:
        case SID_ATTR_PAGE_MAXSIZE:
        case SID_ATTR_PAGE_PAPERBIN:
        case SID_ATTR_PAGE_EXT1:
        case FN_PARAM_FTN_INFO:
        case SID_ATTR_PAGE_ORIENTATION:
        {
            if(pArgs)
            {
                const size_t nCurIdx = m_pWrtShell->GetCurPageDesc();
                SwPageDesc aPageDesc( m_pWrtShell->GetPageDesc( nCurIdx ) );
                ::ItemSetToPageDesc( *pArgs, aPageDesc );
                // change the descriptor of the core
                m_pWrtShell->ChgPageDesc( nCurIdx, aPageDesc );
            }
        }
        break;
        case SID_GO_TO_PAGE:
        {
            sal_uInt16 nPhyPage, nVirPage;
            GetWrtShell().GetPageNum(nPhyPage, nVirPage);
 
            std::shared_ptr<SfxRequest> xRequest = std::make_shared<SfxRequest>(rReq);
            rReq.Ignore();
 
            auto xDialog = std::make_shared<svx::GotoPageDlg>(
                GetViewFrame().GetFrameWeld(), SwResId(STR_GOTO_PAGE_DLG_TITLE),
                SwResId(ST_PGE) + ":", nPhyPage, GetWrtShell().GetPageCnt());
            weld::DialogController::runAsync(xDialog,[this, xDialog, xRequest=std::move(xRequest)](sal_uInt32 nResult) {
                if (nResult == RET_OK)
                    GetWrtShell().GotoPage(xDialog->GetPageSelection(), true);
 
                xRequest->Done();
            });
        }
        break;
        case  FN_EDIT_CURRENT_TOX:
        {
            GetViewFrame().GetDispatcher()->Execute(
                                FN_INSERT_MULTI_TOX, SfxCallMode::ASYNCHRON);
        }
        break;
        case FN_UPDATE_CUR_TOX:
        {
            const SwTOXBase* pBase = m_pWrtShell->GetCurTOX();
            if(pBase)
            {
                // tdf#106374: don't jump view on the update
                const bool bWasLocked = m_pWrtShell->IsViewLocked();
                m_pWrtShell->LockView(true);
                m_pWrtShell->StartAction();
                if(TOX_INDEX == pBase->GetType())
                    m_pWrtShell->ApplyAutoMark();
                m_pWrtShell->UpdateTableOf( *pBase );
                m_pWrtShell->EndAction();
                if (!bWasLocked)
                    m_pWrtShell->LockView(false);
            }
        }
        break;
        case FN_UPDATE_TOX:
        {
            m_pWrtShell->StartAction();
            m_pWrtShell->EnterStdMode();
            bool bOldCursorInReadOnly = m_pWrtShell->IsReadOnlyAvailable();
            m_pWrtShell->SetReadOnlyAvailable( true );
 
            for( int i = 0; i < 2; ++i )
            {
                if( m_pWrtShell->GetTOXCount() == 1 )
                    ++i;
 
                while( m_pWrtShell->GotoPrevTOXBase() )
                    ;   // jump to the first "table of ..."
 
                // if we are not in one, jump to next
                const SwTOXBase* pBase = m_pWrtShell->GetCurTOX();
                if( !pBase )
                {
                    if (m_pWrtShell->GotoNextTOXBase())
                        pBase = m_pWrtShell->GetCurTOX();
                }
 
                bool bAutoMarkApplied = false;
                while( pBase )
                {
                    if(TOX_INDEX == pBase->GetType() && !bAutoMarkApplied)
                    {
                        m_pWrtShell->ApplyAutoMark();
                        bAutoMarkApplied = true;
                    }
                    // pBase is needed only for the interface. Should be changed in future! (JP 1996)
                    m_pWrtShell->UpdateTableOf( *pBase );
 
                    if( m_pWrtShell->GotoNextTOXBase() )
                        pBase = m_pWrtShell->GetCurTOX();
                    else
                        pBase = nullptr;
                }
            }
            m_pWrtShell->SetReadOnlyAvailable( bOldCursorInReadOnly );
            m_pWrtShell->EndAction();
        }
        break;
        case SID_ATTR_BRUSH:
        {
            if(pArgs && SfxItemState::SET == pArgs->GetItemState(RES_BACKGROUND, false, &pItem))
            {
                const size_t nCurIdx = m_pWrtShell->GetCurPageDesc();
                SwPageDesc aDesc( m_pWrtShell->GetPageDesc( nCurIdx ));
                SwFrameFormat& rMaster = aDesc.GetMaster();
                rMaster.SetFormatAttr(*pItem);
                m_pWrtShell->ChgPageDesc( nCurIdx, aDesc);
            }
        }
        break;
        case SID_CLEARHISTORY:
        {
            m_pWrtShell->DelAllUndoObj();
        }
        break;
        case SID_UNDO:
        {
            m_pShell->ExecuteSlot(rReq);
        }
        break;
#if defined(_WIN32) || defined UNX
        case SID_TWAIN_SELECT:
        case SID_TWAIN_TRANSFER:
            GetViewImpl()->ExecuteScan( rReq );
        break;
#endif
 
        case SID_ATTR_DEFTABSTOP:
        {
            const SfxUInt16Item* pTabStopItem = nullptr;
            if(pArgs && (pTabStopItem = pArgs->GetItemIfSet(SID_ATTR_DEFTABSTOP, false)))
            {
                SvxTabStopItem aDefTabs( 0, 0, SvxTabAdjust::Default, RES_PARATR_TABSTOP );
                const sal_uInt16 nTab = pTabStopItem->GetValue();
                MakeDefTabs( nTab, aDefTabs );
                m_pWrtShell->SetDefault( aDefTabs );
            }
        }
        break;
        case SID_ATTR_LANGUAGE  :
        {
            const SvxLanguageItem* pLangItem;
            if(pArgs && (pLangItem = pArgs->GetItemIfSet(SID_ATTR_LANGUAGE, false)))
            {
                SvxLanguageItem aLang(pLangItem->GetLanguage(), RES_CHRATR_LANGUAGE);
                m_pWrtShell->SetDefault( aLang );
                lcl_SetAllTextToDefaultLanguage( *m_pWrtShell, RES_CHRATR_LANGUAGE );
            }
        }
        break;
        case  SID_ATTR_CHAR_CTL_LANGUAGE:
        if(pArgs && SfxItemState::SET == pArgs->GetItemState(RES_CHRATR_CTL_LANGUAGE, false, &pItem))
        {
            m_pWrtShell->SetDefault( *pItem );
            lcl_SetAllTextToDefaultLanguage( *m_pWrtShell, RES_CHRATR_CTL_LANGUAGE );
        }
        break;
        case  SID_ATTR_CHAR_CJK_LANGUAGE:
        if(pArgs && SfxItemState::SET == pArgs->GetItemState(RES_CHRATR_CJK_LANGUAGE, false, &pItem))
        {
            m_pWrtShell->SetDefault( *pItem );
            lcl_SetAllTextToDefaultLanguage( *m_pWrtShell, RES_CHRATR_CJK_LANGUAGE );
        }
        break;
        case FN_OUTLINE_LEVELS_SHOWN:
        {
            SwWrtShell& rSh = GetWrtShell();
            int nOutlineLevel = -1;
            auto nOutlinePos = rSh.GetOutlinePos();
            if (nOutlinePos != SwOutlineNodes::npos)
                nOutlineLevel = rSh.getIDocumentOutlineNodesAccess()->getOutlineLevel(nOutlinePos);
            SwNumberInputDlg aDlg(GetViewFrame().GetFrameWeld(),
                                  SwResId(STR_OUTLINE_LEVELS_SHOWN_TITLE),
                                  SwResId(STR_OUTLINE_LEVELS_SHOWN_SPIN_LABEL),
                                  nOutlineLevel + 1, 1, 10,
                                  SwResId(STR_OUTLINE_LEVELS_SHOWN_HELP_LABEL));
            if (aDlg.run() == RET_OK)
                rSh.MakeOutlineLevelsVisible(aDlg.GetNumber());
        }
        break;
        case FN_TOGGLE_OUTLINE_CONTENT_VISIBILITY:
        {
        size_t nPos(m_pWrtShell->GetOutlinePos());
        if (nPos != SwOutlineNodes::npos)
            GetEditWin().ToggleOutlineContentVisibility(nPos, false);
        }
        break;
        case FN_NAV_ELEMENT:
        {
            pArgs->GetItemState(GetPool().GetWhichIDFromSlotID(FN_NAV_ELEMENT), false, &pItem);
            if(pItem)
            {
                SvxSearchDialogWrapper::SetSearchLabel(SearchLabel::Empty);
                sal_uInt32 nMoveType(static_cast<const SfxUInt32Item*>(pItem)->GetValue());
                SwView::SetMoveType(nMoveType);
            }
        }
        break;
        case FN_SCROLL_PREV:
        case FN_SCROLL_NEXT:
        {
            bool *pbNext = new bool(true);
            if (nSlot == FN_SCROLL_PREV)
                *pbNext = false;
            MoveNavigationHdl(pbNext);
        }
        break;
        case SID_JUMPTOMARK:
            if( pArgs && SfxItemState::SET == pArgs->GetItemState(SID_JUMPTOMARK, false, &pItem))
                JumpToSwMark( SwMarkName(static_cast<const SfxStringItem*>(pItem)->GetValue()) );
        break;
        case SID_GALLERY :
            // First make sure that the sidebar is visible
            GetViewFrame().ShowChildWindow(SID_SIDEBAR);
 
            ::sfx2::sidebar::Sidebar::ShowPanel(
                u"GalleryPanel",
                GetViewFrame().GetFrame().GetFrameInterface());
        break;
        case SID_AVMEDIA_PLAYER :
            GetViewFrame().ChildWindowExecute(rReq);
        break;
        case SID_VIEW_DATA_SOURCE_BROWSER:
        {
            SfxViewFrame& rVFrame = GetViewFrame();
            rVFrame.ChildWindowExecute(rReq);
            if(rVFrame.HasChildWindow(SID_BROWSER))
            {
                const SwDBData& rData = GetWrtShell().GetDBData();
                SwModule::ShowDBObj(*this, rData);
            }
        }
        break;
        case FN_INSERT_FIELD_DATA_ONLY:
        {
            bool bShow = false;
            if( pArgs &&
                SfxItemState::SET == pArgs->GetItemState(nSlot, false, &pItem ))
                bShow = static_cast<const SfxBoolItem*>(pItem)->GetValue();
            if((bShow && m_bInMailMerge) != GetViewFrame().HasChildWindow(nSlot))
                GetViewFrame().ToggleChildWindow(nSlot);
            //if fields have been successfully inserted call the "real"
            //mail merge dialog
#if HAVE_FEATURE_DBCONNECTIVITY && !ENABLE_FUZZERS
            SwWrtShell &rSh = GetWrtShell();
            if(m_bInMailMerge && rSh.IsAnyDatabaseFieldInDoc())
            {
                SwDBManager* pDBManager = rSh.GetDBManager();
                if (pDBManager)
                {
                    SwDBData aData = rSh.GetDBData();
                    rSh.EnterStdMode(); // force change in text shell; necessary for mixing DB fields
                    AttrChangedNotify(nullptr);
 
                    Sequence<PropertyValue> aProperties
                    {
                        comphelper::makePropertyValue(u"DataSourceName"_ustr, aData.sDataSource),
                        comphelper::makePropertyValue(u"Command"_ustr, aData.sCommand),
                        comphelper::makePropertyValue(u"CommandType"_ustr, aData.nCommandType)
                    };
                    pDBManager->ExecuteFormLetter(rSh, aProperties);
                }
            }
#endif
            m_bInMailMerge &= bShow;
            GetViewFrame().GetBindings().Invalidate(FN_INSERT_FIELD);
        }
        break;
        case FN_QRY_MERGE:
        {
            bool bUseCurrentDocument = true;
            bool bQuery = !pArgs || SfxItemState::SET != pArgs->GetItemState(nSlot);
            if(bQuery)
            {
                SfxViewFrame& rTmpFrame = GetViewFrame();
                SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
                ScopedVclPtr<AbstractMailMergeCreateFromDlg> pDlg(pFact->CreateMailMergeCreateFromDlg(rTmpFrame.GetFrameWeld()));
                if (RET_OK == pDlg->Execute())
                    bUseCurrentDocument = pDlg->IsThisDocument();
                else
                    break;
            }
            GenerateFormLetter(bUseCurrentDocument);
        }
        break;
        case SID_RECHECK_DOCUMENT:
        {
            SwDocShell* pDocShell = GetDocShell();
            SwDoc* pDoc = pDocShell->GetDoc();
            uno::Reference< linguistic2::XProofreadingIterator >  xGCIterator( pDoc->GetGCIterator() );
            if( xGCIterator.is() )
            {
                xGCIterator->resetIgnoreRules();
            }
            // reset ignore lists
            pDoc->SpellItAgainSam( true, false, false );
            // clear ignore dictionary
            uno::Reference< linguistic2::XDictionary > xDictionary = LinguMgr::GetIgnoreAllList();
            if( xDictionary.is() )
                xDictionary->clear();
            // put cursor to the start of the document
            m_pWrtShell->StartOfSection();
            [[fallthrough]]; // call spell/grammar dialog
        }
        case FN_SPELL_GRAMMAR_DIALOG:
        {
            SfxViewFrame& rViewFrame = GetViewFrame();
            if (rReq.GetArgs() != nullptr)
                rViewFrame.SetChildWindow (FN_SPELL_GRAMMAR_DIALOG,
                    static_cast<const SfxBoolItem&>( (rReq.GetArgs()->
                        Get(FN_SPELL_GRAMMAR_DIALOG))).GetValue());
            else
                rViewFrame.ToggleChildWindow(FN_SPELL_GRAMMAR_DIALOG);
 
            rViewFrame.GetBindings().Invalidate(FN_SPELL_GRAMMAR_DIALOG);
            rReq.Ignore ();
        }
        break;
        case SID_ALIGN_ANY_LEFT :
        case SID_ALIGN_ANY_HCENTER  :
        case SID_ALIGN_ANY_RIGHT    :
        case SID_ALIGN_ANY_START    :
        case SID_ALIGN_ANY_END      :
        case SID_ALIGN_ANY_JUSTIFIED:
        case SID_ALIGN_ANY_TOP      :
        case SID_ALIGN_ANY_VCENTER  :
        case SID_ALIGN_ANY_BOTTOM   :
        case SID_ALIGN_ANY_HDEFAULT :
        case SID_ALIGN_ANY_VDEFAULT :
        {
            sal_uInt16 nAlias = 0;
            if( m_nSelectionType & (SelectionType::DrawObjectEditMode|SelectionType::Text) )
            {
                switch( nSlot )
                {
                    case SID_ALIGN_ANY_LEFT :       nAlias = SID_ATTR_PARA_ADJUST_LEFT; break;
                    case SID_ALIGN_ANY_HCENTER  :   nAlias = SID_ATTR_PARA_ADJUST_CENTER; break;
                    case SID_ALIGN_ANY_RIGHT    :   nAlias = SID_ATTR_PARA_ADJUST_RIGHT; break;
                    case SID_ALIGN_ANY_START    :   nAlias = SID_ATTR_PARA_ADJUST_START; break;
                    case SID_ALIGN_ANY_END      :   nAlias = SID_ATTR_PARA_ADJUST_END; break;
                    case SID_ALIGN_ANY_JUSTIFIED:   nAlias = SID_ATTR_PARA_ADJUST_BLOCK; break;
                    case SID_ALIGN_ANY_TOP      :   nAlias = SID_TABLE_VERT_NONE; break;
                    case SID_ALIGN_ANY_VCENTER  :   nAlias = SID_TABLE_VERT_CENTER; break;
                    case SID_ALIGN_ANY_BOTTOM   :   nAlias = SID_TABLE_VERT_BOTTOM; break;
                }
            }
            else
            {
                switch( nSlot )
                {
                    case SID_ALIGN_ANY_LEFT :       nAlias = SID_OBJECT_ALIGN_LEFT    ; break;
                    case SID_ALIGN_ANY_HCENTER  :   nAlias = SID_OBJECT_ALIGN_CENTER ; break;
                    case SID_ALIGN_ANY_RIGHT    :   nAlias = SID_OBJECT_ALIGN_RIGHT  ; break;
                    case SID_ALIGN_ANY_TOP      :   nAlias = SID_OBJECT_ALIGN_UP     ;  break;
                    case SID_ALIGN_ANY_VCENTER  :   nAlias = SID_OBJECT_ALIGN_MIDDLE ;  break;
                    case SID_ALIGN_ANY_BOTTOM   :   nAlias = SID_OBJECT_ALIGN_DOWN    ; break;
                }
            }
            //these slots are either re-mapped to text or object alignment
            if (nAlias)
                GetViewFrame().GetDispatcher()->Execute(
                                nAlias, SfxCallMode::ASYNCHRON);
        }
        break;
        case SID_RESTORE_EDITING_VIEW:
        {
            //#i33307# restore editing position
            Point aCursorPos;
            bool bSelectObj;
            if(m_pViewImpl->GetRestorePosition(aCursorPos, bSelectObj))
            {
                m_pWrtShell->SwCursorShell::SetCursor( aCursorPos, !bSelectObj );
                if( bSelectObj )
                {
                    m_pWrtShell->SelectObj( aCursorPos );
                    m_pWrtShell->EnterSelFrameMode( &aCursorPos );
                }
            }
        }
        break;
        case SID_INSERT_GRAPHIC:
        {
            rReq.SetReturnValue(SfxBoolItem(nSlot, InsertGraphicDlg( rReq )));
        }
        break;
        case SID_MOVE_SHAPE_HANDLE:
        {
            if (pArgs && pArgs->Count() >= 3)
            {
                SdrView *pSdrView = m_pWrtShell->HasDrawView() ? m_pWrtShell->GetDrawView() : nullptr;
                if (pSdrView == nullptr)
                    break;
                const SfxUInt32Item* handleNumItem = rReq.GetArg<SfxUInt32Item>(FN_PARAM_1);
                const SfxUInt32Item* newPosXTwips = rReq.GetArg<SfxUInt32Item>(FN_PARAM_2);
                const SfxUInt32Item* newPosYTwips = rReq.GetArg<SfxUInt32Item>(FN_PARAM_3);
                const SfxInt32Item* OrdNum = rReq.GetArg<SfxInt32Item>(FN_PARAM_4);
 
                const sal_uLong handleNum = handleNumItem->GetValue();
                const sal_uLong newPosX = newPosXTwips->GetValue();
                const sal_uLong newPosY = newPosYTwips->GetValue();
                const Point mPoint(newPosX, newPosY);
                const SdrHdl* handle = pSdrView->GetHdlList().GetHdl(handleNum);
                if (!handle)
                {
                    break;
                }
 
                if (handle->GetKind() == SdrHdlKind::Anchor || handle->GetKind() == SdrHdlKind::Anchor_TR)
                    m_pWrtShell->FindAnchorPos(mPoint, /*bMoveIt=*/true);
                else
                    pSdrView->MoveShapeHandle(handleNum, mPoint, OrdNum ? OrdNum->GetValue() : -1);
            }
            break;
        }
        case FN_SORT_CHAPTERS:
        {
            auto sort_chapters = [this](const SwNode* pParentNode, int nOutlineLevel)
            {
                const SwNode* pEndNode;
 
                std::vector<const SwTextNode*> vLevelOutlineNodes;
                auto GetLevelOutlineNodesAndEndNode = [&]()
                {
                    vLevelOutlineNodes.clear();
                    bool bParentFound = false;
                    pEndNode = &m_pWrtShell->GetNodes().GetEndOfContent();
                    for (const SwNode* pNode : m_pWrtShell->GetNodes().GetOutLineNds())
                    {
                        if (!pNode->IsTextNode())
                            continue;
                        if (pParentNode && !bParentFound)
                        {
                            bParentFound = pNode == pParentNode;
                            continue;
                        }
                        if (pNode->GetTextNode()->GetAttrOutlineLevel() < nOutlineLevel)
                        {
                            pEndNode = pNode;
                            break;
                        }
                        if (pNode->GetTextNode()->GetAttrOutlineLevel() == nOutlineLevel)
                            vLevelOutlineNodes.emplace_back(pNode->GetTextNode());
                    }
                };
 
                GetLevelOutlineNodesAndEndNode();
 
                std::vector<const SwTextNode*> vSortedLevelOutlineNodes = vLevelOutlineNodes;
                std::stable_sort(vSortedLevelOutlineNodes.begin(), vSortedLevelOutlineNodes.end(),
                                 [](const SwTextNode* a, const SwTextNode* b)
                                 {
                                     const OUString& raText = a->GetText();
                                     const OUString& rbText = b->GetText();
                                     return raText < rbText;
                                 });
 
                for (size_t i = 0, nSize = vLevelOutlineNodes.size(); i < nSize; i++)
                {
                    // Find the position that the sorted node is at in the unsorted vector.
                    // This is the position of the node in the unsorted vector that is used for the start of
                    // the range of nodes to be moved in this iteration.
                    size_t j = 0;
                    for (; j < nSize; j++)
                    {
                        if (vSortedLevelOutlineNodes[i] == vLevelOutlineNodes[j])
                            break;
                    }
 
                    // The end node in the range is the next entry in the unsorted vector or the pEndNode set
                    // by GetLevelOutlineNodesAndEndNode or the end of the document.
                    const SwNode* pEndRangeNode;
                    if (j + 1 < nSize)
                        pEndRangeNode = vLevelOutlineNodes[j + 1];
                    else
                        pEndRangeNode = pEndNode;
 
                    SwNodeRange aNodeRange(*vLevelOutlineNodes[j], SwNodeOffset(0), *pEndRangeNode,
                                           SwNodeOffset(0));
 
                    // Move the range of nodes to before the node in the unsorted outline vector at the
                    // current iteration index to match the position of the outline node in the sorted vector.
                    m_pWrtShell->getIDocumentContentOperations().MoveNodeRange(
                        aNodeRange, *const_cast<SwTextNode*>(vLevelOutlineNodes[i]),
                        SwMoveFlags::DEFAULT | SwMoveFlags::CREATEUNDOOBJ);
 
                    GetLevelOutlineNodesAndEndNode();
                }
            };
 
            const SwOutlineNodes& rOutlineNodes = m_pWrtShell->GetNodes().GetOutLineNds();
 
            if (rOutlineNodes.empty())
                return;
 
            m_pWrtShell->StartAction();
            m_pWrtShell->StartUndo(SwUndoId::SORT_CHAPTERS);
 
            // Create an ordered set of outline levels in the outline nodes for use to determine
            // the lowest level to use for first sort and to only iterate over higher levels used.
            std::set<int> aOutlineLevelSet;
            for (const SwNode* pNode : rOutlineNodes)
            {
                int nOutlineLevel = pNode->GetTextNode()->GetAttrOutlineLevel();
                aOutlineLevelSet.emplace(nOutlineLevel);
            }
 
            // No parent node for the lowest outline level nodes sort.
            sort_chapters(nullptr /*pParentNode*/,
                          aOutlineLevelSet.extract(aOutlineLevelSet.begin()).value());
 
            for (int nOutlineLevel : aOutlineLevelSet)
                for (size_t i = 0, nSize = rOutlineNodes.size(); i < nSize; i++)
                {
                    const SwNode* pParentNode = rOutlineNodes[i];
                    if (i + 1 < nSize
                        && rOutlineNodes[i + 1]->GetTextNode()->GetAttrOutlineLevel()
                               == nOutlineLevel)
                    {
                        sort_chapters(pParentNode, nOutlineLevel);
                    }
                }
 
            m_pWrtShell->EndUndo(SwUndoId::SORT_CHAPTERS);
            m_pWrtShell->EndAction();
        }
        break;
        default:
            OSL_ENSURE(false, "wrong dispatcher");
            return;
    }
    if(!bIgnore)
        rReq.Done();
}
 
bool SwView::IsConditionalFastCall( const SfxRequest &rReq )
{
    sal_uInt16 nId = rReq.GetSlot();
    bool bRet = false;
 
    if (nId == FN_REDLINE_ACCEPT_DIRECT || nId == FN_REDLINE_REJECT_DIRECT)
    {
        if (comphelper::LibreOfficeKit::isActive())
            bRet = true;
    }
    return bRet || SfxShell::IsConditionalFastCall(rReq);
 
}
 
/// invalidate page numbering field
void SwView::UpdatePageNums()
{
    SfxBindings &rBnd = GetViewFrame().GetBindings();
    rBnd.Invalidate(FN_STAT_PAGE);
}
 
void SwView::UpdateDocStats()
{
    SfxBindings &rBnd = GetViewFrame().GetBindings();
    rBnd.Invalidate( FN_STAT_WORDCOUNT );
    rBnd.Update( FN_STAT_WORDCOUNT );
}
 
/// get status of the status line
void SwView::StateStatusLine(SfxItemSet &rSet)
{
    SwWrtShell& rShell = GetWrtShell();
 
    SfxWhichIter aIter( rSet );
    sal_uInt16 nWhich = aIter.FirstWhich();
    OSL_ENSURE( nWhich, "empty set");
 
    //get section change event
    const SwSection* CurrSect = rShell.GetCurrSection();
    if( CurrSect )
    {
        const UIName& sCurrentSectionName = CurrSect->GetSectionName();
        if(sCurrentSectionName != m_sOldSectionName)
        {
            SwCursorShell::FireSectionChangeEvent(2, 1);
        }
        m_sOldSectionName = sCurrentSectionName;
    }
    else if (!m_sOldSectionName.isEmpty())
    {
        SwCursorShell::FireSectionChangeEvent(2, 1);
        m_sOldSectionName= UIName();
    }
    //get column change event
    if(rShell.bColumnChange())
    {
        SwCursorShell::FireColumnChangeEvent(2, 1);
    }
 
    while( nWhich )
    {
        switch( nWhich )
        {
            case FN_STAT_PAGE:
            {
                OUString aTooltip;
                OUString aPageStr;
 
                SwVisiblePageNumbers aVisiblePageNumbers;
                m_pWrtShell->GetFirstLastVisPageNumbers(aVisiblePageNumbers, m_pWrtShell->GetView());
 
                // convert to strings and define references
                OUString sFirstPhy = OUString::number(aVisiblePageNumbers.nFirstPhy);
                OUString sLastPhy = OUString::number(aVisiblePageNumbers.nLastPhy);
                OUString sFirstVirt = OUString::number(aVisiblePageNumbers.nFirstVirt);
                OUString sLastVirt = OUString::number(aVisiblePageNumbers.nLastVirt);
                OUString& sFirstCustomPhy = aVisiblePageNumbers.sFirstCustomPhy;
                OUString& sLastCustomPhy = aVisiblePageNumbers.sLastCustomPhy;
                OUString& sFirstCustomVirt = aVisiblePageNumbers.sFirstCustomVirt;
                OUString& sLastCustomVirt = aVisiblePageNumbers.sLastCustomVirt;
                OUString sPageCount = OUString::number(m_pWrtShell->GetPageCount());
 
                if (aVisiblePageNumbers.nFirstPhy == aVisiblePageNumbers.nFirstVirt)
                {
                    aTooltip = SwResId(STR_BOOKCTRL_HINT);
                    if (aVisiblePageNumbers.nFirstPhy != aVisiblePageNumbers.nLastPhy)
                    {
                        if (sFirstPhy == sFirstCustomPhy && sLastPhy == sLastCustomPhy)
                        {
                            aPageStr = SwResId(STR_PAGES_COUNT);
                            aPageStr = aPageStr.replaceFirst("%1", sFirstPhy);
                            aPageStr = aPageStr.replaceFirst("%2", sLastPhy);
                            aPageStr = aPageStr.replaceFirst("%3", sPageCount);
                        }
                        else
                        {
                            aPageStr = SwResId(STR_PAGES_COUNT_CUSTOM);
                            aPageStr = aPageStr.replaceFirst("%1", sFirstPhy);
                            aPageStr = aPageStr.replaceFirst("%2", sLastPhy);
                            aPageStr = aPageStr.replaceFirst("%3", sFirstCustomPhy);
                            aPageStr = aPageStr.replaceFirst("%4", sLastCustomPhy);
                            aPageStr = aPageStr.replaceFirst("%5", sPageCount);
                        }
                    }
                    else
                    {
                        if (sFirstPhy == sFirstCustomPhy && sLastPhy == sLastCustomPhy)
                        {
                            aPageStr = SwResId(STR_PAGE_COUNT);
                            aPageStr = aPageStr.replaceFirst("%1", sFirstPhy);
                            aPageStr = aPageStr.replaceFirst("%2", sPageCount);
                        }
                        else
                        {
                            aPageStr = SwResId(STR_PAGE_COUNT_CUSTOM);
                            aPageStr = aPageStr.replaceFirst("%1", sFirstPhy);
                            aPageStr = aPageStr.replaceFirst("%2", sFirstCustomPhy);
                            aPageStr = aPageStr.replaceFirst("%3", sPageCount);
                        }
                    }
                }
                else
                {
                    aTooltip = SwResId(STR_BOOKCTRL_HINT_EXTENDED);
                    if (aVisiblePageNumbers.nFirstPhy != aVisiblePageNumbers.nLastPhy)
                    {
                        if (sFirstPhy == sFirstCustomPhy && sLastPhy == sLastCustomPhy)
                        {
                            aPageStr = SwResId(STR_PAGES_COUNT_EXTENDED);
                            aPageStr = aPageStr.replaceFirst("%1", sFirstPhy);
                            aPageStr = aPageStr.replaceFirst("%2", sLastPhy);
                            aPageStr = aPageStr.replaceFirst("%3", sPageCount);
                            aPageStr = aPageStr.replaceFirst("%4", sFirstVirt);
                            aPageStr = aPageStr.replaceFirst("%5", sLastVirt);
                        }
                        else
                        {
                            aPageStr = SwResId(STR_PAGES_COUNT_CUSTOM_EXTENDED);
                            aPageStr = aPageStr.replaceFirst("%1", sFirstPhy);
                            aPageStr = aPageStr.replaceFirst("%2", sLastPhy);
                            aPageStr = aPageStr.replaceFirst("%3", sFirstCustomPhy);
                            aPageStr = aPageStr.replaceFirst("%4", sLastCustomPhy);
                            aPageStr = aPageStr.replaceFirst("%5", sPageCount);
                            aPageStr = aPageStr.replaceFirst("%6", sFirstVirt);
                            aPageStr = aPageStr.replaceFirst("%7", sLastVirt);
                            aPageStr = aPageStr.replaceFirst("%8", sFirstCustomVirt);
                            aPageStr = aPageStr.replaceFirst("%9", sLastCustomVirt);
                        }
                    }
                    else
                    {
                        if (sFirstPhy == sFirstCustomPhy && sLastPhy == sLastCustomPhy)
                        {
                            aPageStr = SwResId(STR_PAGE_COUNT_EXTENDED);
                            aPageStr = aPageStr.replaceFirst("%1", sFirstPhy);
                            aPageStr = aPageStr.replaceFirst("%2", sPageCount);
                            aPageStr = aPageStr.replaceFirst("%3", sFirstVirt);
                        }
                        else
                        {
                            aPageStr = SwResId(STR_PAGE_COUNT_CUSTOM_EXTENDED);
                            aPageStr = aPageStr.replaceFirst("%1", sFirstPhy);
                            aPageStr = aPageStr.replaceFirst("%2", sFirstCustomPhy);
                            aPageStr = aPageStr.replaceFirst("%3", sPageCount);
                            aPageStr = aPageStr.replaceFirst("%4", sFirstVirt);
                            aPageStr = aPageStr.replaceFirst("%5", sFirstCustomVirt);
                        }
                    }
                }
 
                // replace range indicator with two pages conjunction if applicable
                if ((aVisiblePageNumbers.nLastPhy - aVisiblePageNumbers.nFirstPhy) == 1)
                    aPageStr = aPageStr.replaceAll("-", SwResId(STR_PAGES_TWO_CONJUNCTION));
 
                // status bar bookmark control string and tooltip
                std::vector<OUString> aStringList
                {
                    aPageStr,
                    aTooltip
                };
                rSet.Put(SfxStringListItem(FN_STAT_PAGE, &aStringList));
 
                //if existing page number is not equal to old page number, send out this event.
                if (m_nOldPageNum != aVisiblePageNumbers.nFirstPhy)
                {
                    if (m_nOldPageNum != 0)
                        SwCursorShell::FirePageChangeEvent(m_nOldPageNum, aVisiblePageNumbers.nFirstPhy);
                    m_nOldPageNum = aVisiblePageNumbers.nFirstPhy;
                }
                const sal_uInt16 nCnt = GetWrtShell().GetPageCnt();
                if (m_nPageCnt != nCnt)   // notify Basic
                {
                    m_nPageCnt = nCnt;
                    SfxGetpApp()->NotifyEvent(SfxEventHint(SfxEventHintId::SwEventPageCount, SwDocShell::GetEventName(STR_SW_EVENT_PAGE_COUNT), GetViewFrame().GetObjectShell()), false);
                }
            }
            break;
 
            case FN_STAT_WORDCOUNT:
            {
                SwDocStat selectionStats;
                SwDocStat documentStats;
                rShell.CountWords(selectionStats);
                documentStats = rShell.GetDoc()->getIDocumentStatistics().GetUpdatedDocStat( true /* complete-async */, false /* don't update fields */ );
 
                sal_uLong nWord = selectionStats.nChar ? selectionStats.nWord : documentStats.nWord;
                sal_uLong nChar = selectionStats.nChar ? selectionStats.nChar : documentStats.nChar;
                TranslateId pResId = selectionStats.nChar ? STR_WORDCOUNT : STR_WORDCOUNT_NO_SELECTION;
                TranslateNId pWordResId = selectionStats.nChar ? STR_WORDCOUNT_WORDARG : STR_WORDCOUNT_WORDARG_NO_SELECTION;
                TranslateNId pCharResId = selectionStats.nChar ? STR_WORDCOUNT_CHARARG : STR_WORDCOUNT_CHARARG_NO_SELECTION;
 
                const LocaleDataWrapper& rLocaleData = Application::GetSettings().GetUILocaleDataWrapper();
                OUString aWordArg = SwResId(pWordResId, nWord).replaceAll("$1", rLocaleData.getNum(nWord, 0));
                OUString aCharArg = SwResId(pCharResId, nChar).replaceAll("$1", rLocaleData.getNum(nChar, 0));
                OUString aWordCount(SwResId(pResId));
                aWordCount = aWordCount.replaceAll("$1", aWordArg);
                aWordCount = aWordCount.replaceAll("$2", aCharArg);
                rSet.Put( SfxStringItem( FN_STAT_WORDCOUNT, aWordCount ) );
 
                SwPostItMgr* pPostItMgr = rShell.GetPostItMgr();
                if (pPostItMgr)
                    selectionStats.nComments = pPostItMgr->end() - pPostItMgr->begin();
 
                SwWordCountWrapper *pWrdCnt = static_cast<SwWordCountWrapper*>(GetViewFrame().GetChildWindow(SwWordCountWrapper::GetChildWindowId()));
                if (pWrdCnt)
                    pWrdCnt->SetCounts(selectionStats, documentStats);
            }
            break;
            case FN_STAT_ACCESSIBILITY_CHECK:
            {
                std::unique_ptr<sw::OnlineAccessibilityCheck> const& rOnlineAccessibilityCheck = rShell.GetDoc()->getOnlineAccessibilityCheck();
                if (rOnlineAccessibilityCheck)
                {
                    sal_Int32 nIssues = rOnlineAccessibilityCheck->getNumberOfAccessibilityIssues()
                        + rOnlineAccessibilityCheck->getNumberOfDocumentLevelAccessibilityIssues();
                    rSet.Put(SfxInt32Item(FN_STAT_ACCESSIBILITY_CHECK, nIssues));
                }
            }
            break;
 
            case FN_STAT_TEMPLATE:
            {
                rSet.Put(SfxStringItem( FN_STAT_TEMPLATE,
                                        rShell.GetCurPageStyle().toString()));
 
            }
            break;
            case SID_ATTR_ZOOM:
            {
                if ( ( GetDocShell()->GetCreateMode() != SfxObjectCreateMode::EMBEDDED ) || !GetDocShell()->IsInPlaceActive() )
                {
                    const SwViewOption* pVOpt = rShell.GetViewOptions();
                    SvxZoomType eZoom = pVOpt->GetZoomType();
                    SvxZoomItem aZoom(eZoom,
                                        pVOpt->GetZoom());
                    if( pVOpt->getBrowseMode() )
                    {
                        aZoom.SetValueSet(
                                SvxZoomEnableFlags::N50|
                                SvxZoomEnableFlags::N75|
                                SvxZoomEnableFlags::N100|
                                SvxZoomEnableFlags::N150|
                                SvxZoomEnableFlags::N200);
                    }
                    rSet.Put( aZoom );
                }
                else
                    rSet.DisableItem( SID_ATTR_ZOOM );
            }
            break;
            case SID_ATTR_VIEWLAYOUT:
            {
                if ( ( GetDocShell()->GetCreateMode() != SfxObjectCreateMode::EMBEDDED ) || !GetDocShell()->IsInPlaceActive() )
                {
                    const SwViewOption* pVOpt = rShell.GetViewOptions();
                    const sal_uInt16 nColumns  = pVOpt->GetViewLayoutColumns();
                    const bool  bBookMode = pVOpt->IsViewLayoutBookMode();
                    SvxViewLayoutItem aViewLayout(nColumns, bBookMode);
                    rSet.Put( aViewLayout );
                }
                else
                    rSet.DisableItem( SID_ATTR_VIEWLAYOUT );
            }
            break;
            case SID_ATTR_ZOOMSLIDER:
            {
                if ( ( GetDocShell()->GetCreateMode() != SfxObjectCreateMode::EMBEDDED ) || !GetDocShell()->IsInPlaceActive() )
                {
                    const SwViewOption* pVOpt = rShell.GetViewOptions();
                    const sal_uInt16 nCurrentZoom = pVOpt->GetZoom();
                    SvxZoomSliderItem aZoomSliderItem( nCurrentZoom, MINZOOM, MAXZOOM );
                    aZoomSliderItem.AddSnappingPoint( 100 );
 
                    if ( !m_pWrtShell->getIDocumentSettingAccess().get(DocumentSettingId::BROWSE_MODE) )
                    {
                        const sal_uInt16 nColumns = pVOpt->GetViewLayoutColumns();
                        const bool bAutomaticViewLayout = 0 == nColumns;
                        const SwPostItMgr* pMgr = GetPostItMgr();
 
                        // snapping points:
                        // automatic mode: 1 Page, 2 Pages, 100%
                        // n Columns mode: n Pages, 100%
                        // n Columns book mode: nPages without gaps, 100%
                        const SwRect aPageRect( m_pWrtShell->GetAnyCurRect( CurRectType::PageCalc ) );
                        const SwRect aRootRect( m_pWrtShell->GetAnyCurRect( CurRectType::PagesArea ) ); // width of columns
                        Size aPageSize( aPageRect.SSize() );
                        aPageSize.AdjustWidth(pMgr->HasNotes() && pMgr->ShowNotes() ?
                                             pMgr->GetSidebarWidth() + pMgr->GetSidebarBorderWidth() :
                                             0 );
 
                        Size aRootSize( aRootRect.SSize() );
 
                        const MapMode aTmpMap( MapUnit::MapTwip );
                        const Size aEditSize = GetEditWin().GetOutputSizePixel();
                        const Size aWindowSize( GetEditWin().PixelToLogic( aEditSize, aTmpMap ) );
 
                        const tools::Long nOf = pVOpt->GetDocumentBorder() * 2;
                        tools::Long nTmpWidth = bAutomaticViewLayout ? aPageSize.Width() : aRootSize.Width();
                        nTmpWidth += nOf;
                        aPageSize.AdjustHeight(nOf );
                        tools::Long nFac = aWindowSize.Width() * 100 / nTmpWidth;
 
                        tools::Long nVisPercent = aWindowSize.Height() * 100 / aPageSize.Height();
                        nFac = std::min( nFac, nVisPercent );
 
                        if (nFac >= MINZOOM)
                        {
                            aZoomSliderItem.AddSnappingPoint( nFac );
                        }
 
                        if ( bAutomaticViewLayout )
                        {
                            nTmpWidth += aPageSize.Width() + pVOpt->GetGapBetweenPages();
                            nFac = aWindowSize.Width() * 100 / nTmpWidth;
                            nFac = std::min( nFac, nVisPercent );
                            if (nFac >= MINZOOM)
                            {
                                aZoomSliderItem.AddSnappingPoint( nFac );
                            }
                        }
                    }
 
                    rSet.Put( aZoomSliderItem );
                }
                else
                    rSet.DisableItem( SID_ATTR_ZOOMSLIDER );
            }
            break;
            case SID_ATTR_POSITION:
            case SID_ATTR_SIZE:
            {
                if( !rShell.IsFrameSelected() && !rShell.GetSelectedObjCount() )
                    SwBaseShell::SetFrameMode_( FLY_DRAG_END );
                else
                {
                    FlyMode eFrameMode = SwBaseShell::GetFrameMode();
                    if ( eFrameMode == FLY_DRAG_START || eFrameMode == FLY_DRAG )
                    {
                        if ( nWhich == SID_ATTR_POSITION )
                            rSet.Put( SfxPointItem( SID_ATTR_POSITION,
                                                    rShell.GetAnchorObjDiff()));
                        else
                            rSet.Put( SvxSizeItem( SID_ATTR_SIZE,
                                                   rShell.GetObjSize()));
                    }
                }
            }
            break;
            case SID_TABLE_CELL:
 
            if( rShell.IsFrameSelected() || rShell.GetSelectedObjCount() )
            {
                // #i39171# Don't put a SvxSizeItem into a slot which is defined as SfxStringItem.
                // SvxPosSizeStatusBarControl no longer resets to empty display if only one slot
                // has no item, so SID_TABLE_CELL can remain empty (the SvxSizeItem is supplied
                // in SID_ATTR_SIZE).
            }
            else
            {
                StatusCategory eCategory(StatusCategory::NONE);
                OUString sStr;
                if( rShell.IsCursorInTable() )
                {
                    // table name + cell coordinate
                    sStr = rShell.GetTableFormat()->GetName().toString() + ":" + rShell.GetBoxNms();
                    eCategory = StatusCategory::TableCell;
                }
                else
                {
                    const SwSection* pCurrSect = rShell.GetCurrSection();
                    if( pCurrSect )
                    {
                        switch( pCurrSect->GetType() )
                        {
                        case SectionType::ToxHeader:
                        case SectionType::ToxContent:
                            {
                                const SwTOXBase* pTOX = m_pWrtShell->GetCurTOX();
                                if( pTOX )
                                {
                                    sStr = pTOX->GetTOXName().toString();
                                    eCategory = StatusCategory::TableOfContents;
                                }
                                else
                                {
                                    OSL_ENSURE( false,
                                        "Unknown kind of section" );
                                    sStr = pCurrSect->GetSectionName().toString();
                                    eCategory = StatusCategory::Section;
                                }
                            }
                            break;
                        default:
                            sStr = pCurrSect->GetSectionName().toString();
                            eCategory = StatusCategory::Section;
                            break;
                        }
                    }
                }
 
                const SwNumRule* pNumRule = rShell.GetNumRuleAtCurrCursorPos();
                const bool bOutlineNum = pNumRule && pNumRule->IsOutlineRule();
 
                if (pNumRule && !bOutlineNum )  // cursor in numbering
                {
                    sal_uInt8 nNumLevel = rShell.GetNumLevel();
                    if ( nNumLevel < MAXLEVEL )
                    {
                        if(!pNumRule->IsAutoRule())
                        {
                            SfxItemSetFixed<RES_PARATR_NUMRULE, RES_PARATR_NUMRULE> aSet(GetPool());
                            rShell.GetCurAttr(aSet);
                            if(SfxItemState::DEFAULT <=
                               aSet.GetItemState(RES_PARATR_NUMRULE))
                            {
                                const UIName sNumStyle =
                                    aSet.Get(RES_PARATR_NUMRULE).GetValue();
                                if(!sNumStyle.isEmpty())
                                {
                                    if(!sStr.isEmpty())
                                        sStr += sStatusDelim;
                                    if (eCategory == StatusCategory::NONE)
                                        eCategory = StatusCategory::ListStyle;
                                    sStr += sNumStyle.toString();
                                }
                            }
                        }
                        if (!sStr.isEmpty())
                            sStr += sStatusDelim;
                        sStr += SwResId(STR_NUM_LEVEL) + OUString::number( nNumLevel + 1 );
                        if (eCategory == StatusCategory::NONE)
                            eCategory = StatusCategory::Numbering;
                    }
                }
                const int nOutlineLevel = rShell.GetCurrentParaOutlineLevel();
                if( nOutlineLevel != 0 )
                {
                    if (!sStr.isEmpty())
                        sStr += " , ";
                    if( bOutlineNum )
                    {
                        sStr += SwResId(STR_OUTLINE_NUMBERING) +
                            sStatusDelim + SwResId(STR_NUM_LEVEL);
                    }
                    else
                        sStr += SwResId(STR_NUM_OUTLINE);
                    sStr += OUString::number( nOutlineLevel);
                    if (eCategory == StatusCategory::NONE)
                        eCategory = StatusCategory::Numbering;
                }
 
                if( rShell.HasReadonlySel() )
                {
                    if (!sStr.isEmpty())
                        sStr = sStatusDelim + sStr;
                    sStr = SwResId(SW_STR_READONLY) + sStr;
                }
                if (!sStr.isEmpty())
                    rSet.Put( SvxStatusItem( SID_TABLE_CELL, sStr, eCategory ));
            }
            break;
            case FN_STAT_SELMODE:
            {
                if(rShell.IsStdMode())
                    rSet.Put(SfxUInt16Item(FN_STAT_SELMODE, 0));
                else if(rShell.IsAddMode())
                    rSet.Put(SfxUInt16Item(FN_STAT_SELMODE, 2));
                else if(rShell.IsBlockMode())
                    rSet.Put(SfxUInt16Item(FN_STAT_SELMODE, 3));
                else
                    rSet.Put(SfxUInt16Item(FN_STAT_SELMODE, 1));
                break;
            }
            case SID_ATTR_INSERT:
                if( rShell.IsRedlineOn() )
                    rSet.DisableItem( nWhich );
                else
                {
                    rSet.Put(SfxBoolItem(SID_ATTR_INSERT,rShell.IsInsMode()));
                }
                break;
        }
        nWhich = aIter.NextWhich();
    }
}
 
/** execute method for the status line
 *
 * @param rReq ???
 */
void SwView::ExecuteStatusLine(SfxRequest &rReq)
{
    SwWrtShell &rSh = GetWrtShell();
    const SfxItemSet* pArgs = rReq.GetArgs();
    const SfxPoolItem* pItem=nullptr;
    bool bUp = false;
    sal_uInt16 nWhich = rReq.GetSlot();
    switch( nWhich )
    {
        case FN_STAT_PAGE:
        {
            GetViewFrame().GetDispatcher()->Execute( SID_GO_TO_PAGE,
                                      SfxCallMode::SYNCHRON|SfxCallMode::RECORD );
        }
        break;
 
        case FN_STAT_WORDCOUNT:
        {
            GetViewFrame().GetDispatcher()->Execute(FN_WORDCOUNT_DIALOG,
                                      SfxCallMode::SYNCHRON|SfxCallMode::RECORD );
        }
        break;
 
        case FN_STAT_ACCESSIBILITY_CHECK:
        {
            const SfxStringItem sDeckName(SID_SIDEBAR_DECK, u"A11yCheckDeck"_ustr);
            GetViewFrame().GetDispatcher()->ExecuteList(SID_SIDEBAR_DECK, SfxCallMode::RECORD,
                { &sDeckName });
        }
        break;
 
        case FN_STAT_BOOKMARK:
        if ( pArgs )
        {
            if (SfxItemState::SET == pArgs->GetItemState( nWhich, true, &pItem))
            {
                const IDocumentMarkAccess* pMarkAccess = rSh.getIDocumentMarkAccess();
                const sal_Int32 nIdx = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
                if(nIdx < pMarkAccess->getBookmarksCount())
                {
                    const auto ppBookmark = rSh.getIDocumentMarkAccess()->getBookmarksBegin() + nIdx;
                    rSh.EnterStdMode();
                    rSh.GotoMark( *ppBookmark );
                }
                else
                    OSL_FAIL("SwView::ExecuteStatusLine(..)"
                        " - Ignoring out of range bookmark index");
            }
        }
        break;
 
        case FN_STAT_TEMPLATE:
        {
            weld::Window* pDialogParent = GetViewFrame().GetFrameWeld();
            css::uno::Any aAny(pDialogParent->GetXWindow());
            SfxUnoAnyItem aDialogParent(SID_DIALOG_PARENT, aAny);
            const SfxPoolItem* pInternalItems[ 2 ];
            pInternalItems[ 0 ] = &aDialogParent;
            pInternalItems[ 1 ] = nullptr;
            GetViewFrame().GetDispatcher()->Execute(FN_FORMAT_PAGE_DLG,
                                        SfxCallMode::SYNCHRON|SfxCallMode::RECORD,
                                        nullptr, 0, pInternalItems);
        }
        break;
        case SID_ATTR_ZOOM:
        {
            if ( ( GetDocShell()->GetCreateMode() != SfxObjectCreateMode::EMBEDDED ) || !GetDocShell()->IsInPlaceActive() )
            {
                const SfxItemSet *pSet = nullptr;
                ScopedVclPtr<AbstractSvxZoomDialog> pDlg;
                if ( pArgs )
                    pSet = pArgs;
                else
                {
                    const SwViewOption& rViewOptions = *rSh.GetViewOptions();
                    SfxItemSetFixed<SID_ATTR_ZOOM, SID_ATTR_ZOOM, SID_ATTR_VIEWLAYOUT, SID_ATTR_VIEWLAYOUT> aCoreSet(m_pShell->GetPool());
                    SvxZoomItem aZoom( rViewOptions.GetZoomType(), rViewOptions.GetZoom() );
 
                    const bool bBrowseMode = rSh.GetViewOptions()->getBrowseMode();
                    if( bBrowseMode )
                    {
                        aZoom.SetValueSet(
                                SvxZoomEnableFlags::N50|
                                SvxZoomEnableFlags::N75|
                                SvxZoomEnableFlags::N100|
                                SvxZoomEnableFlags::N150|
                                SvxZoomEnableFlags::N200);
                    }
                    aCoreSet.Put( aZoom );
 
                    if ( !bBrowseMode )
                    {
                        const SvxViewLayoutItem aViewLayout( rViewOptions.GetViewLayoutColumns(), rViewOptions.IsViewLayoutBookMode() );
                        aCoreSet.Put( aViewLayout );
                    }
 
                    SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
                    pDlg.disposeAndReset(pFact->CreateSvxZoomDialog(GetViewFrame().GetFrameWeld(), aCoreSet));
                    pDlg->SetLimits( MINZOOM, MAXZOOM );
                    if( pDlg->Execute() != RET_CANCEL )
                        pSet = pDlg->GetOutputItemSet();
                }
 
                const SvxViewLayoutItem* pViewLayoutItem = nullptr;
                if ( pSet && (pViewLayoutItem = pSet->GetItemIfSet(SID_ATTR_VIEWLAYOUT)))
                {
                    const sal_uInt16 nColumns = pViewLayoutItem->GetValue();
                    const bool bBookMode  = pViewLayoutItem->IsBookMode();
                    SetViewLayout( nColumns, bBookMode );
                }
 
                const SvxZoomItem* pZoomItem = nullptr;
                if ( pSet && (pZoomItem = pSet->GetItemIfSet(SID_ATTR_ZOOM)))
                {
                    SvxZoomType eType = pZoomItem->GetType();
                    SetZoom( eType, pZoomItem->GetValue() );
                }
                bUp = true;
                if ( pZoomItem )
                    rReq.AppendItem( *pZoomItem );
                rReq.Done();
            }
        }
        break;
 
        case SID_ATTR_VIEWLAYOUT:
        {
            if ( pArgs && !rSh.getIDocumentSettingAccess().get(DocumentSettingId::BROWSE_MODE) &&
                ( ( GetDocShell()->GetCreateMode() != SfxObjectCreateMode::EMBEDDED ) || !GetDocShell()->IsInPlaceActive() ) )
            {
                if ( const SvxViewLayoutItem* pLayoutItem = pArgs->GetItemIfSet(SID_ATTR_VIEWLAYOUT ))
                {
                    const sal_uInt16 nColumns = pLayoutItem->GetValue();
                    const bool bBookMode  = (0 != nColumns && 0 == (nColumns % 2)) && pLayoutItem->IsBookMode();
 
                    SetViewLayout( nColumns, bBookMode );
                }
 
                bUp = true;
                rReq.Done();
 
                InvalidateRulerPos();
            }
        }
        break;
 
        case SID_ATTR_ZOOMSLIDER:
        {
            if ( pArgs && ( ( GetDocShell()->GetCreateMode() != SfxObjectCreateMode::EMBEDDED ) || !GetDocShell()->IsInPlaceActive() ) )
            {
                if ( const SvxZoomSliderItem* pZoomItem = pArgs->GetItemIfSet(SID_ATTR_ZOOMSLIDER) )
                {
                    const sal_uInt16 nCurrentZoom = pZoomItem->GetValue();
                    SetZoom( SvxZoomType::PERCENT, nCurrentZoom );
                }
 
                bUp = true;
                rReq.Done();
            }
        }
        break;
 
        case SID_ATTR_SIZE:
        {
            sal_uInt16 nId = 0;
            if( rSh.IsCursorInTable() )
                nId = FN_FORMAT_TABLE_DLG;
            else if( rSh.GetCurTOX() )
                nId = FN_INSERT_MULTI_TOX;
            else if( rSh.GetCurrSection() )
                nId = FN_EDIT_REGION;
            else
            {
                const SwNumRule* pNumRule = rSh.GetNumRuleAtCurrCursorPos();
                if( pNumRule )  // cursor in numbering
                {
                    if( pNumRule->IsAutoRule() )
                        nId = FN_NUMBER_BULLETS;
                    else
                    {
                        // start dialog of the painter
                        nId = 0;
                    }
                }
                else if( rSh.IsFrameSelected() )
                    nId = FN_FORMAT_FRAME_DLG;
                else if( rSh.GetSelectedObjCount() )
                    nId = SID_ATTR_TRANSFORM;
            }
            if( nId )
                GetViewFrame().GetDispatcher()->Execute(nId,
                    SfxCallMode::SYNCHRON | SfxCallMode::RECORD );
        }
        break;
 
        case FN_STAT_SELMODE:
        {
            if ( pArgs )
            {
                if (SfxItemState::SET == pArgs->GetItemState( nWhich, true, &pItem))
                {
                    switch ( static_cast<const SfxUInt16Item *>(pItem)->GetValue() )
                    {
                        case 0: rSh.EnterStdMode(); break;
                        case 1: rSh.EnterExtMode(); break;
                        case 2: rSh.EnterAddMode(); break;
                        case 3: rSh.EnterBlockMode(); break;
                    }
                }
            }
            bUp = true;
            break;
        }
        case FN_SET_ADD_MODE:
            rSh.ToggleAddMode();
            nWhich = FN_STAT_SELMODE;
            bUp = true;
        break;
        case FN_SET_BLOCK_MODE:
            rSh.ToggleBlockMode();
            nWhich = FN_STAT_SELMODE;
            bUp = true;
        break;
        case FN_SET_EXT_MODE:
            rSh.ToggleExtMode();
            nWhich = FN_STAT_SELMODE;
            bUp = true;
        break;
        case SID_ATTR_INSERT:
            SwPostItMgr* pMgr = GetPostItMgr();
            if ( pMgr && pMgr->HasActiveSidebarWin() )
            {
                pMgr->ToggleInsModeOnActiveSidebarWin();
            }
            else
                rSh.ToggleInsMode();
            bUp = true;
        break;
 
    }
    if ( bUp )
    {
        SfxBindings &rBnd = GetViewFrame().GetBindings();
        rBnd.Invalidate(nWhich);
        rBnd.Update(nWhich);
    }
}
 
void SwView::InsFrameMode(sal_uInt16 nCols)
{
    if ( m_pWrtShell->HasWholeTabSelection() )
    {
        SwFlyFrameAttrMgr aMgr( true, m_pWrtShell.get(), Frmmgr_Type::TEXT, nullptr );
 
        const SwFrameFormat &rPageFormat =
                m_pWrtShell->GetPageDesc(m_pWrtShell->GetCurPageDesc()).GetMaster();
        SwTwips lWidth = rPageFormat.GetFrameSize().GetWidth();
        const SvxLRSpaceItem &rLR = rPageFormat.GetLRSpace();
        lWidth -= rLR.ResolveLeft({}) + rLR.ResolveRight({});
        aMgr.SetSize(Size(lWidth, aMgr.GetSize().Height()));
        if(nCols > 1)
        {
            SwFormatCol aCol;
            aCol.Init( nCols, aCol.GetGutterWidth(), aCol.GetWishWidth() );
            aMgr.SetCol( aCol );
        }
        aMgr.InsertFlyFrame();
    }
    else
        GetEditWin().InsFrame(nCols);
}
 
/// show "edit link" dialog
void SwView::EditLinkDlg()
{
    if (officecfg::Office::Common::Security::Scripting::DisableActiveContent::get())
    {
        std::unique_ptr<weld::MessageDialog> xError(
            Application::CreateMessageDialog(nullptr, VclMessageType::Warning, VclButtonsType::Ok,
                                             SvtResId(STR_WARNING_EXTERNAL_LINK_EDIT_DISABLED)));
        xError->run();
        return;
    }
 
    bool bWeb = dynamic_cast<SwWebView*>( this ) !=  nullptr;
    SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
    VclPtr<SfxAbstractLinksDialog> pDlg(pFact->CreateLinksDialog(GetViewFrame().GetFrameWeld(), &GetWrtShell().GetLinkManager(), bWeb));
    pDlg->StartExecuteAsync(
        [pDlg] (sal_Int32 /*nResult*/)->void
        {
            pDlg->disposeOnce();
        }
    );
}
 
namespace sw {
 
auto PrepareJumpToTOXMark(SwDoc const& rDoc, std::u16string_view aName)
    -> std::optional<std::pair<SwTOXMark, sal_Int32>>
{
    size_t const first(aName.find(toxMarkSeparator));
    if (first == std::u16string_view::npos)
    {
        SAL_WARN("sw.ui", "JumpToTOXMark: missing separator");
        return std::optional<std::pair<SwTOXMark, sal_Int32>>();
    }
    sal_Int32 const counter(o3tl::toInt32(aName.substr(0, first)));
    if (counter <= 0)
    {
        SAL_WARN("sw.ui", "JumpToTOXMark: invalid counter");
        return std::optional<std::pair<SwTOXMark, sal_Int32>>();
    }
    size_t const second(aName.find(toxMarkSeparator, first + 1));
    if (second == std::u16string_view::npos)
    {
        SAL_WARN("sw.ui", "JumpToTOXMark: missing separator");
        return std::optional<std::pair<SwTOXMark, sal_Int32>>();
    }
    std::u16string_view const entry(aName.substr(first + 1, second - (first + 1)));
    if (aName.size() < second + 2)
    {
        SAL_WARN("sw.ui", "JumpToTOXMark: invalid tox");
        return std::optional<std::pair<SwTOXMark, sal_Int32>>();
    }
    sal_uInt16 const indexType(aName[second + 1]);
    std::u16string_view const indexName(aName.substr(second + 2));
    SwTOXType const* pType(nullptr);
    switch (indexType)
    {
        case 'A':
            pType = rDoc.GetTOXType(TOX_INDEX, 0);
            assert(pType);
            break;
        case 'C':
            pType = rDoc.GetTOXType(TOX_CONTENT, 0);
            assert(pType);
            break;
        case 'U':
            for (auto i = rDoc.GetTOXTypeCount(TOX_USER); 0 < i; )
            {
                --i;
                auto const pTmp(rDoc.GetTOXType(TOX_USER, i));
                if (pTmp->GetTypeName() == indexName)
                {
                    pType = pTmp;
                    break;
                }
            }
            break;
    }
    if (!pType)
    {
        SAL_WARN("sw.ui", "JumpToTOXMark: tox doesn't exist");
        return std::optional<std::pair<SwTOXMark, sal_Int32>>();
    }
    // type and alt text are the search keys
    SwTOXMark tmp(pType);
    tmp.SetAlternativeText(OUString(entry));
    return std::optional<std::pair<SwTOXMark, sal_Int32>>(std::pair<SwTOXMark, sal_Int32>(tmp, counter));
}
 
} // namespace sw
 
static auto JumpToTOXMark(SwWrtShell & rSh, std::u16string_view aName) -> bool
{
    std::optional<std::pair<SwTOXMark, sal_Int32>> const tmp(
        sw::PrepareJumpToTOXMark(*rSh.GetDoc(), aName));
    if (!tmp)
    {
        return false;
    }
    SwTOXMark const* pMark(&tmp->first);
    // hack: check first if one exists
    // need simple ptr control, else UnitTest CppunitTest_sw_uiwriter3 fails
    if (!areSfxPoolItemPtrsEqual(&tmp->first, &rSh.GetDoc()->GotoTOXMark(tmp->first, TOX_SAME_NXT, rSh.IsReadOnlyAvailable())))
    {
        for (sal_Int32 i = 0; i < tmp->second; ++i)
        {
            pMark = &rSh.GotoTOXMark(*pMark, TOX_SAME_NXT);
        }
        return true;
    }
    else
    {
        SAL_WARN("sw.ui", "JumpToTOXMark: tox mark doesn't exist");
        return false;
    }
}
 
bool SwView::JumpToSwMark( const SwMarkName& rMark )
{
    bool bRet = false;
    if( !rMark.toString().isEmpty() )
    {
        // place bookmark at top-center
        bool bSaveCC = m_bCenterCursor;
        bool bSaveCT = m_bTopCursor;
        SetCursorAtTop( true );
 
        // For scrolling the FrameSet, the corresponding shell needs to have the focus.
        bool bHasShFocus = m_pWrtShell->HasShellFocus();
        if( !bHasShFocus )
            m_pWrtShell->ShellGetFocus();
 
        const SwFormatINetFormat* pINet;
        OUString sCmp;
        OUString  sMark( INetURLObject::decode( rMark.toString(),
                                           INetURLObject::DecodeMechanism::WithCharset ));
 
        sal_Int32 nLastPos, nPos = sMark.indexOf( cMarkSeparator );
        if( -1 != nPos )
            while( -1 != ( nLastPos = sMark.indexOf( cMarkSeparator, nPos + 1 )) )
                nPos = nLastPos;
 
        IDocumentMarkAccess::const_iterator ppMark;
        IDocumentMarkAccess* const pMarkAccess = m_pWrtShell->getIDocumentMarkAccess();
        if( -1 != nPos )
            sCmp = sMark.copy(nPos + 1).replaceAll(" ", "");
 
        if( !sCmp.isEmpty() )
        {
            OUString sName( sMark.copy( 0, nPos ) );
            sCmp = sCmp.toAsciiLowerCase();
            FlyCntType eFlyType = FLYCNTTYPE_ALL;
 
            if (sCmp == "drawingobject")
                bRet = m_pWrtShell->GotoDrawingObject(sName);
            else if( sCmp == "region" )
            {
                m_pWrtShell->EnterStdMode();
                bRet = m_pWrtShell->GotoRegion( sName );
            }
            else if( sCmp == "outline" )
            {
                m_pWrtShell->EnterStdMode();
                bRet = m_pWrtShell->GotoOutline( sName );
            }
            else if( sCmp == "frame" )
                eFlyType = FLYCNTTYPE_FRM;
            else if( sCmp == "graphic" )
                eFlyType = FLYCNTTYPE_GRF;
            else if( sCmp == "ole" )
                eFlyType = FLYCNTTYPE_OLE;
            else if( sCmp == "table" )
            {
                m_pWrtShell->EnterStdMode();
                bRet = m_pWrtShell->GotoTable( UIName(sName) );
            }
            else if( sCmp == "sequence" )
            {
                m_pWrtShell->EnterStdMode();
                sal_Int32 nNoPos = sName.indexOf( cSequenceMarkSeparator );
                if ( nNoPos != -1 )
                {
                    sal_uInt16 nSeqNo = o3tl::toInt32(sName.subView( nNoPos + 1 ));
                    sName = sName.copy( 0, nNoPos );
                    bRet = m_pWrtShell->GotoRefMark(SwMarkName(sName), ReferencesSubtype::SequenceField, nSeqNo);
                }
            }
            else if (sCmp == "toxmark")
            {
                bRet = JumpToTOXMark(*m_pWrtShell, sName);
            }
            else if( sCmp == "text" )
            {
                // normal text search
                m_pWrtShell->EnterStdMode();
 
                i18nutil::SearchOptions2 aSearchOpt(
                                    0,
                                    sName, OUString(),
                                    SvtSysLocale().GetLanguageTag().getLocale(),
                                    0,0,0,
                                    TransliterationFlags::IGNORE_CASE,
                                    SearchAlgorithms2::ABSOLUTE,
                                    '\\' );
 
                //todo/mba: assuming that notes shouldn't be searched
                if( m_pWrtShell->SearchPattern( aSearchOpt, false/*bSearchInNotes*/, SwDocPositions::Start, SwDocPositions::End ))
                {
                    m_pWrtShell->EnterStdMode(); // remove the selection
                    bRet = true;
                }
            }
            else if( pMarkAccess->getAllMarksEnd() != (ppMark = pMarkAccess->findMark(SwMarkName(sMark))) )
            {
                bRet = m_pWrtShell->GotoMark( *ppMark, false );
            }
            else if( nullptr != ( pINet = m_pWrtShell->FindINetAttr( sMark ) )) {
                m_pWrtShell->addCurrentPosition();
                bRet = m_pWrtShell->GotoINetAttr( *pINet->GetTextINetFormat() );
            }
 
            // for all types of Flys
            if( FLYCNTTYPE_ALL != eFlyType && m_pWrtShell->GotoFly( UIName(sName), eFlyType ))
            {
                bRet = true;
                if( FLYCNTTYPE_FRM == eFlyType )
                {
                    // TextFrames: set Cursor in the frame
                    m_pWrtShell->UnSelectFrame();
                    m_pWrtShell->LeaveSelFrameMode();
                }
                else
                {
                    m_pWrtShell->HideCursor();
                    m_pWrtShell->EnterSelFrameMode();
                }
            }
        }
        else if( pMarkAccess->getAllMarksEnd() != (ppMark = pMarkAccess->findMark(SwMarkName(sMark))))
        {
            bRet = m_pWrtShell->GotoMark( *ppMark, false );
        }
        else if( nullptr != ( pINet = m_pWrtShell->FindINetAttr( sMark ) ))
            bRet = m_pWrtShell->GotoINetAttr( *pINet->GetTextINetFormat() );
 
        // make selection visible later
        if ( m_aVisArea.IsEmpty() )
            m_bMakeSelectionVisible = true;
 
        // reset ViewStatus
        SetCursorAtTop( bSaveCT, bSaveCC );
 
        if(!m_pWrtShell->IsFrameSelected() && !m_pWrtShell->GetSelectedObjCount() && !m_pWrtShell->IsViewLocked())
            m_pWrtShell->ShowCursor();
 
        if( !bHasShFocus )
            m_pWrtShell->ShellLoseFocus();
    }
    return bRet;
}
 
// #i67305# Undo after insert from file:
// Undo "Insert form file" crashes with documents imported from binary filter (.sdw) => disabled
// Undo "Insert form file" crashes with (.odt) documents crashes if these documents contains
// page styles with active header/footer => disabled for those documents
static size_t lcl_PageDescWithHeader( const SwDoc& rDoc )
{
    size_t nRet = 0;
    size_t nCnt = rDoc.GetPageDescCnt();
    for( size_t i = 0; i < nCnt; ++i )
    {
        const SwPageDesc& rPageDesc = rDoc.GetPageDesc( i );
        const SwFrameFormat& rMaster = rPageDesc.GetMaster();
        const SwFormatHeader* pHeaderItem = rMaster.GetAttrSet().GetItemIfSet( RES_HEADER, false );
        const SwFormatFooter* pFooterItem = rMaster.GetAttrSet().GetItemIfSet( RES_FOOTER, false );
        if( (pHeaderItem && pHeaderItem->IsActive()) ||
            (pFooterItem && pFooterItem->IsActive()) )
            ++nRet;
    }
    return nRet; // number of page styles with active header/footer
}
 
void SwView::ExecuteInsertDoc( SfxRequest& rRequest, const SfxPoolItem* pItem )
{
    m_pViewImpl->InitRequest( rRequest );
    m_pViewImpl->SetParam( pItem ? 1 : 0 );
    const sal_uInt16 nSlot = rRequest.GetSlot();
 
    if ( !pItem )
    {
        InsertDoc( nSlot, u""_ustr, u""_ustr );
    }
    else
    {
        OUString sFile, sFilter;
        sFile = static_cast<const SfxStringItem *>( pItem )->GetValue();
        if ( SfxItemState::SET == rRequest.GetArgs()->GetItemState( FN_PARAM_1, true, &pItem ) )
            sFilter = static_cast<const SfxStringItem *>(pItem )->GetValue();
 
        bool bHasFileName = !sFile.isEmpty();
        tools::Long nFound = InsertDoc( nSlot, sFile, sFilter );
 
        if ( bHasFileName )
        {
            rRequest.SetReturnValue( SfxBoolItem( nSlot, nFound != -1 ) );
            rRequest.Done();
        }
    }
}
 
tools::Long SwView::InsertDoc( sal_uInt16 nSlotId, const OUString& rFileName, const OUString& rFilterName, sal_Int16 nVersion )
{
    std::unique_ptr<SfxMedium> pMed;
    SwDocShell* pDocSh = GetDocShell();
 
    if( !rFileName.isEmpty() )
    {
        SfxObjectFactory& rFact = pDocSh->GetFactory();
        std::shared_ptr<const SfxFilter> pFilter = rFact.GetFilterContainer()->GetFilter4FilterName( rFilterName );
        if ( !pFilter )
        {
            pMed.reset(new SfxMedium(rFileName, StreamMode::READ, nullptr, nullptr ));
            SfxFilterMatcher aMatcher( rFact.GetFilterContainer()->GetName() );
            pMed->UseInteractionHandler( true );
            ErrCode nErr = aMatcher.GuessFilter(*pMed, pFilter, SfxFilterFlags::NONE);
            if ( nErr )
                pMed.reset();
            else
                pMed->SetFilter( pFilter );
        }
        else
            pMed.reset(new SfxMedium(rFileName, StreamMode::READ, std::move(pFilter), nullptr));
    }
    else
    {
        m_pViewImpl->StartDocumentInserter(
            // tdf#118578 allow inserting any Writer document except GlobalDoc
            SwDocShell::Factory().GetFactoryName(),
            LINK( this, SwView, DialogClosedHdl ),
            nSlotId
        );
        return -1;
    }
 
    if( !pMed )
        return -1;
 
    return InsertMedium( nSlotId, std::move(pMed), nVersion );
}
 
tools::Long SwView::InsertMedium( sal_uInt16 nSlotId, std::unique_ptr<SfxMedium> pMedium, sal_Int16 nVersion )
{
    bool bInsert = false, bCompare = false;
    tools::Long nFound = 0;
    SwDocShell* pDocSh = GetDocShell();
 
    switch( nSlotId )
    {
        case SID_DOCUMENT_MERGE:                        break;
        case SID_DOCUMENT_COMPARE: bCompare = true; break;
        case SID_INSERTDOC:        bInsert = true;  break;
 
        default:
            OSL_ENSURE( false, "unknown SlotId!" );
            bInsert = true;
            break;
    }
 
    if( bInsert )
    {
        uno::Reference< frame::XDispatchRecorder > xRecorder =
                GetViewFrame().GetBindings().GetRecorder();
        if ( xRecorder.is() )
        {
            SfxRequest aRequest(GetViewFrame(), SID_INSERTDOC);
            aRequest.AppendItem(SfxStringItem(SID_INSERTDOC, pMedium->GetOrigURL()));
            if(pMedium->GetFilter())
                aRequest.AppendItem(SfxStringItem(FN_PARAM_1, pMedium->GetFilter()->GetName()));
            aRequest.Done();
        }
 
        SfxObjectShellRef aRef( pDocSh );
 
        ErrCode nError = SfxObjectShell::HandleFilter( pMedium.get(), pDocSh );
        // #i16722# aborted?
        if(nError != ERRCODE_NONE)
        {
            return -1;
        }
 
        pMedium->Download();    // start download if needed
        if( aRef.is() && 1 < aRef->GetRefCount() )  // still a valid ref?
        {
            SwReaderPtr pRdr;
            Reader *pRead = pDocSh->StartConvertFrom(*pMedium, pRdr, m_pWrtShell.get());
            if( pRead ||
                (pMedium->GetFilter()->GetFilterFlags() & SfxFilterFlags::STARONEFILTER) )
            {
                size_t nUndoCheck = 0;
                SwDoc *pDoc = pDocSh->GetDoc();
                if( pRead && pDocSh->GetDoc() )
                    nUndoCheck = lcl_PageDescWithHeader( *pDoc );
                ErrCodeMsg nErrno;
                {   //Scope for SwWait-Object, to be able to execute slots
                    //outside this scope.
                    SwWait aWait( *GetDocShell(), true );
                    m_pWrtShell->StartAllAction();
                    if ( m_pWrtShell->HasSelection() )
                        m_pWrtShell->DelRight();      // delete selections
                    if( pRead )
                    {
                        nErrno = pRdr->Read( *pRead );  // and insert document
                        pRdr.reset();
                    }
                    else
                    {
                        ::sw::UndoGuard const ug(pDoc->GetIDocumentUndoRedo());
                        rtl::Reference<SwXTextRange> const xInsertPosition(
                            SwXTextRange::CreateXTextRange(*pDoc,
                                *m_pWrtShell->GetCursor()->GetPoint(), nullptr));
                        nErrno = pDocSh->ImportFrom(*pMedium, xInsertPosition)
                                    ? ERRCODE_NONE : ERR_SWG_READ_ERROR;
                    }
 
                }
 
                // update all "table of ..." sections if needed
                if( m_pWrtShell->IsUpdateTOX() )
                {
                    SfxRequest aReq( FN_UPDATE_TOX, SfxCallMode::SLOT, GetPool() );
                    Execute( aReq );
                    m_pWrtShell->SetUpdateTOX( false ); // reset
                }
 
                if( pDoc )
                { // Disable Undo for .sdw or
                  // if the number of page styles with header/footer has changed
                    if( !pRead || nUndoCheck != lcl_PageDescWithHeader( *pDoc ) )
                    {
                        pDoc->GetIDocumentUndoRedo().DelAllUndoObj();
                    }
                }
 
                m_pWrtShell->EndAllAction();
                if( nErrno )
                {
                    ErrorHandler::HandleError( nErrno );
                    nFound = nErrno.IsError() ? -1 : 0;
                }
                else
                    nFound = 0;
            }
        }
    }
    else
    {
        SfxObjectShellRef xDocSh;
        SfxObjectShellLock xLockRef;
 
        const int nRet = SwFindDocShell( xDocSh, xLockRef, pMedium->GetName(), OUString(),
                                    OUString(), nVersion, pDocSh, pMedium->GetInteractionHandler() );
        if( nRet )
        {
            SwWait aWait( *GetDocShell(), true );
            m_pWrtShell->StartAllAction();
 
            m_pWrtShell->EnterStdMode(); // delete selections
 
            if( bCompare )
                nFound = m_pWrtShell->CompareDoc( *static_cast<SwDocShell*>( xDocSh.get() )->GetDoc() );
            else
                nFound = m_pWrtShell->MergeDoc( *static_cast<SwDocShell*>( xDocSh.get() )->GetDoc() );
 
            m_pWrtShell->EndAllAction();
 
            if (!bCompare && !nFound)
            {
                std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetEditWin().GetFrameWeld(),
                                                              VclMessageType::Info, VclButtonsType::Ok,
                                                              SwResId(STR_NO_MERGE_ENTRY)));
                xInfoBox->run();
            }
            if( nRet==2 && xDocSh.is() )
                xDocSh->DoClose();
        }
    }
 
    return nFound;
}
 
void SwView::EnableMailMerge()
{
    m_bInMailMerge = true;
    SfxBindings& rBind = GetViewFrame().GetBindings();
    rBind.Invalidate(FN_INSERT_FIELD_DATA_ONLY);
    rBind.Update(FN_INSERT_FIELD_DATA_ONLY);
}
 
#if HAVE_FEATURE_DBCONNECTIVITY && !ENABLE_FUZZERS
 
namespace
{
    bool lcl_NeedAdditionalDataSource( const uno::Reference< XDatabaseContext >& _rDatasourceContext )
    {
        Sequence < OUString > aNames = _rDatasourceContext->getElementNames();
 
        return  (   !aNames.hasElements()
                ||  (   ( 1 == aNames.getLength() )
                    &&  aNames.getConstArray()[0] == SwModule::get()->GetDBConfig()->GetBibliographySource().sDataSource
                    )
                );
    }
}
 
#endif
 
void SwView::GenerateFormLetter(bool bUseCurrentDocument)
{
#if !HAVE_FEATURE_DBCONNECTIVITY || ENABLE_FUZZERS
    (void) bUseCurrentDocument;
#else
    if(bUseCurrentDocument)
    {
        if(!GetWrtShell().IsAnyDatabaseFieldInDoc())
        {
            //check availability of data sources (except biblio source)
            const uno::Reference<XComponentContext>& xContext( ::comphelper::getProcessComponentContext() );
            uno::Reference<XDatabaseContext>  xDBContext = DatabaseContext::create(xContext);
            bool bCallAddressPilot = false;
            if ( lcl_NeedAdditionalDataSource( xDBContext ) )
            {
                // no data sources are available - create a new one
                std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), u"modules/swriter/ui/datasourcesunavailabledialog.ui"_ustr));
                std::unique_ptr<weld::MessageDialog> xQuery(xBuilder->weld_message_dialog(u"DataSourcesUnavailableDialog"_ustr));
                // no cancel allowed
                if (RET_OK != xQuery->run())
                    return;
                bCallAddressPilot = true;
            }
            else
            {
                //take an existing data source or create a new one?
                SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
                ScopedVclPtr<AbstractMailMergeFieldConnectionsDlg> pConnectionsDlg(pFact->CreateMailMergeFieldConnectionsDlg(GetFrameWeld()));
                if(RET_OK == pConnectionsDlg->Execute())
                    bCallAddressPilot = !pConnectionsDlg->IsUseExistingConnections();
                else
                    return;
 
            }
            if(bCallAddressPilot)
            {
                GetViewFrame().GetDispatcher()->Execute(
                                SID_ADDRESS_DATA_SOURCE, SfxCallMode::SYNCHRON);
                if ( lcl_NeedAdditionalDataSource( xDBContext ) )
                    // no additional data source has been created
                    // -> assume that the user has cancelled the pilot
                    return;
            }
 
            //call insert fields with database field page available, only
            SfxViewFrame& rVFrame = GetViewFrame();
            //at first hide the default field dialog if currently visible
            rVFrame.SetChildWindow(FN_INSERT_FIELD, false);
            //enable the status of the db field dialog - it is disabled in the status method
            //to prevent creation of the dialog without mail merge active
            EnableMailMerge();
            //then show the "Data base only" field dialog
            SfxBoolItem aOn(FN_INSERT_FIELD_DATA_ONLY, true);
            rVFrame.GetDispatcher()->ExecuteList(FN_INSERT_FIELD_DATA_ONLY,
                    SfxCallMode::SYNCHRON, { &aOn });
            return;
        }
        else
        {
            OUString sSource;
            if(!GetWrtShell().IsFieldDataSourceAvailable(sSource))
            {
                std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), u"modules/swriter/ui/warndatasourcedialog.ui"_ustr));
                std::unique_ptr<weld::MessageDialog> xWarning(xBuilder->weld_message_dialog(u"WarnDataSourceDialog"_ustr));
                OUString sTmp(xWarning->get_primary_text());
                xWarning->set_primary_text(sTmp.replaceFirst("%1", sSource));
                if (RET_OK == xWarning->run())
                {
                    SfxAbstractDialogFactory* pFact = SfxAbstractDialogFactory::Create();
                    VclPtr<VclAbstractDialog> pDlg(pFact->CreateVclDialog( nullptr, SID_OPTIONS_DATABASES ));
                    pDlg->StartExecuteAsync(
                        [pDlg] (sal_Int32 /*nResult*/)->void
                        {
                            pDlg->disposeOnce();
                        }
                    );
                }
                return ;
            }
        }
        SwDBManager* pDBManager = GetWrtShell().GetDBManager();
 
        SwDBData aData;
        SwWrtShell &rSh = GetWrtShell();
 
        std::vector<OUString> aDBNameList;
        std::vector<OUString> aAllDBNames;
        rSh.GetAllUsedDB( aDBNameList, &aAllDBNames );
        if(!aDBNameList.empty())
        {
            const OUString& sDBName(aDBNameList[0]);
            sal_Int32 nIdx {0};
            aData.sDataSource = sDBName.getToken(0, DB_DELIM, nIdx);
            aData.sCommand = sDBName.getToken(0, DB_DELIM, nIdx);
            aData.nCommandType = o3tl::toInt32(o3tl::getToken(sDBName, 0, DB_DELIM, nIdx));
        }
        rSh.EnterStdMode(); // force change in text shell; necessary for mixing DB fields
        AttrChangedNotify(nullptr);
 
        if (pDBManager)
        {
            Sequence<PropertyValue> aProperties
            {
                comphelper::makePropertyValue(u"DataSourceName"_ustr, aData.sDataSource),
                comphelper::makePropertyValue(u"Command"_ustr, aData.sCommand),
                comphelper::makePropertyValue(u"CommandType"_ustr, aData.nCommandType),
            };
            pDBManager->ExecuteFormLetter(GetWrtShell(), aProperties);
        }
    }
    else
    {
        // call documents and template dialog
        SfxApplication* pSfxApp = SfxGetpApp();
        weld::Window* pTopWin = pSfxApp->GetTopWindow();
 
        SfxTemplateManagerDlg aDocTemplDlg(GetFrameWeld());
        int nRet = aDocTemplDlg.run();
        bool bNewWin = false;
        if ( nRet == RET_OK )
        {
            if ( pTopWin != pSfxApp->GetTopWindow() )
            {
                // the dialogue opens a document -> a new TopWindow appears
                pTopWin = pSfxApp->GetTopWindow();
                bNewWin = true;
            }
        }
 
        if (bNewWin)
        {
            // after the destruction of the dialogue its parent comes to top,
            // but we want that the new document is on top
            pTopWin->present();
        }
    }
#endif
}
 
IMPL_LINK( SwView, DialogClosedHdl, sfx2::FileDialogHelper*, _pFileDlg, void )
{
    if ( ERRCODE_NONE != _pFileDlg->GetError() )
        return;
 
    std::unique_ptr<SfxMedium> pMed = m_pViewImpl->CreateMedium();
    if ( !pMed )
    {
        std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(GetEditWin().GetFrameWeld(),
                                                      VclMessageType::Info, VclButtonsType::Ok,
                                                      SwResId(RID_SVXSTR_TXTFILTER_FILTERERROR)));
        xInfoBox->run();
        return;
    }
 
    const sal_uInt16 nSlot = m_pViewImpl->GetRequest()->GetSlot();
    tools::Long nFound = InsertMedium( nSlot, std::move(pMed), m_pViewImpl->GetParam() );
 
    if ( SID_INSERTDOC == nSlot )
    {
        if ( m_pViewImpl->GetParam() == 0 )
        {
            m_pViewImpl->GetRequest()->SetReturnValue( SfxBoolItem( nSlot, nFound != -1 ) );
            m_pViewImpl->GetRequest()->Ignore();
        }
        else
        {
            m_pViewImpl->GetRequest()->SetReturnValue( SfxBoolItem( nSlot, nFound != -1 ) );
            m_pViewImpl->GetRequest()->Done();
        }
    }
    else if ( SID_DOCUMENT_COMPARE == nSlot || SID_DOCUMENT_MERGE == nSlot )
    {
        m_pViewImpl->GetRequest()->SetReturnValue( SfxInt32Item( nSlot, nFound ) );
 
        if ( nFound > 0 ) // show Redline browser
        {
            SfxViewFrame& rVFrame = GetViewFrame();
            rVFrame.ShowChildWindow(FN_REDLINE_ACCEPT);
 
            // re-initialize Redline dialog
            sal_uInt16 nId = SwRedlineAcceptChild::GetChildWindowId();
            SwRedlineAcceptChild* pRed = static_cast<SwRedlineAcceptChild*>(rVFrame.GetChildWindow( nId ));
            if ( pRed )
                pRed->ReInitDlg();
        }
    }
}
 
void SwView::ExecuteScan( SfxRequest& rReq )
{
    if (m_pViewImpl)
        m_pViewImpl->ExecuteScan(rReq) ;
}
 
const OUString& SwView::GetOldGrfCat()
{
    return GetCachedString(OldGrfCat);
}
 
void SwView::SetOldGrfCat(const OUString& sStr)
{
    SetCachedString(OldGrfCat, sStr);
}
 
const OUString& SwView::GetOldTabCat()
{
    return GetCachedString(OldTabCat);
}
 
void SwView::SetOldTabCat(const OUString& sStr)
{
    SetCachedString(OldTabCat, sStr);
}
 
const OUString& SwView::GetOldFrameCat()
{
    return GetCachedString(OldFrameCat);
}
 
void SwView::SetOldFrameCat(const OUString& sStr)
{
    SetCachedString(OldFrameCat, sStr);
}
 
const OUString& SwView::GetOldDrwCat()
{
    return GetCachedString(OldDrwCat);
}
 
void SwView::SetOldDrwCat(const OUString& sStr)
{
    SwView::SetCachedString(OldDrwCat, sStr);
}
 
 
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

↑ V530 The return value of function 'Execute' is required to be utilized.

↑ V530 The return value of function 'ExecuteList' is required to be utilized.

↑ V530 The return value of function 'Execute' is required to be utilized.

↑ V530 The return value of function 'ExecuteSlot' is required to be utilized.

↑ V530 The return value of function 'Execute' is required to be utilized.

↑ V530 The return value of function 'FindAnchorPos' is required to be utilized.

↑ V530 The return value of function 'Execute' is required to be utilized.

↑ V530 The return value of function 'Execute' is required to be utilized.

↑ V530 The return value of function 'ExecuteList' is required to be utilized.

↑ V530 The return value of function 'Execute' is required to be utilized.

↑ V530 The return value of function 'Execute' is required to be utilized.

↑ V530 The return value of function 'Execute' is required to be utilized.

↑ V530 The return value of function 'ExecuteList' is required to be utilized.

↑ V595 The 'pDoc' pointer was utilized before it was verified against nullptr. Check lines: 3032, 3048.

↑ V560 A part of conditional expression is always true: nRedline != SwRedlineTable::npos.