/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <o3tl/sprintf.hxx>
#include <svx/sdtaitm.hxx>
#include <svx/svdotext.hxx>
#include <editeng/editobj.hxx>
#include <svx/svdoole2.hxx>
#include <sot/storage.hxx>
#include <svl/itemset.hxx>
#include <svx/svdocapt.hxx>
#include <svx/unoapi.hxx>
#include <editeng/writingmodeitem.hxx>
#include <tools/urlobj.hxx>
#include <rtl/math.hxx>
#include <rtl/uuid.h>
#include <sal/log.hxx>
#include <drwlayer.hxx>
#include <root.hxx>
#include <utility>
#include <xcl97rec.hxx>
#include <xcl97esc.hxx>
#include <xeescher.hxx>
#include <xehelper.hxx>
#include <xelink.hxx>
#include <xlcontent.hxx>
#include <editeng/adjustitem.hxx>
#include <editeng/eeitem.hxx>
#include <filter/msfilter/msoleexp.hxx>
#include <unotools/localedatawrapper.hxx>
#include <stdio.h>
#include <document.hxx>
#include <rangelst.hxx>
#include <docoptio.hxx>
#include <tabprotection.hxx>
#include <com/sun/star/embed/Aspects.hpp>
#include <com/sun/star/chart/XChartDocument.hpp>
#include <com/sun/star/chart2/XCoordinateSystemContainer.hpp>
#include <com/sun/star/chart2/XChartTypeContainer.hpp>
#include <com/sun/star/chart2/XChartDocument.hpp>
#include <sax/fastattribs.hxx>
#include <officecfg/Office/Common.hxx>
#include <oox/token/tokens.hxx>
#include <oox/token/namespaces.hxx>
#include <oox/token/relationship.hxx>
#include <oox/export/shapes.hxx>
#include <oox/export/utils.hxx>
#include <oox/export/vmlexport.hxx>
#include <detfunc.hxx>
#include <memory>
using namespace ::com::sun::star;
using ::com::sun::star::uno::Reference;
using ::com::sun::star::uno::UNO_QUERY;
using ::com::sun::star::beans::XPropertySet;
using ::com::sun::star::drawing::XShape;
using ::oox::drawingml::ShapeExport;
using ::oox::vml::VMLExport;
using namespace oox;
XclExpObjList::XclExpObjList( const XclExpRoot& rRoot, XclEscherEx& rEscherEx ) :
XclExpRoot( rRoot ),
mnScTab( rRoot.GetCurrScTab() ),
mrEscherEx( rEscherEx )
{
pMsodrawingPerSheet.reset( new XclExpMsoDrawing( rEscherEx ) );
// open the DGCONTAINER and the patriarch group shape
mrEscherEx.OpenContainer( ESCHER_DgContainer );
tools::Rectangle aRect( 0, 0, 0, 0 );
mrEscherEx.EnterGroup( &aRect );
mrEscherEx.UpdateDffFragmentEnd();
}
XclExpObjList::~XclExpObjList()
{
maObjs.clear();
pMsodrawingPerSheet.reset();
pSolverContainer.reset();
}
sal_uInt16 XclExpObjList::Add( std::unique_ptr<XclObj> pObj )
{
OSL_ENSURE( maObjs.size() < 0xFFFF, "XclExpObjList::Add: too much for Xcl" );
size_t nSize = maObjs.size();
if ( nSize < 0xFFFF )
{
pObj->SetId( nSize+1 );
pObj->SetTab( mnScTab );
maObjs.push_back(std::move(pObj));
++nSize;
}
else
{
nSize = 0;
}
return nSize;
}
std::unique_ptr<XclObj> XclExpObjList::pop_back ()
{
auto ret = std::move(maObjs.back());
maObjs.pop_back();
return ret;
}
void XclExpObjList::EndSheet()
{
// Is there still something in the stream? -> The solver container
if( mrEscherEx.HasPendingDffData() )
pSolverContainer.reset( new XclExpMsoDrawing( mrEscherEx ) );
// close the DGCONTAINER created by XclExpObjList ctor MSODRAWING
mrEscherEx.CloseContainer();
}
void XclExpObjList::Save( XclExpStream& rStrm )
{
//! Escher must be written, even if there are no objects
pMsodrawingPerSheet->Save( rStrm );
for ( const auto& rxObj : maObjs )
rxObj->Save( rStrm );
if( pSolverContainer )
pSolverContainer->Save( rStrm );
}
namespace {
bool IsFormControlObject( const XclObj *rObj )
{
switch( rObj->GetObjType() )
{
case EXC_OBJTYPE_CHECKBOX:
case EXC_OBJTYPE_BUTTON:
return true;
default:
return false;
}
}
bool IsVmlObject( const XclObj *rObj )
{
switch( rObj->GetObjType() )
{
case EXC_OBJTYPE_NOTE:
return true;
default:
return false;
}
}
sal_Int32 GetVmlObjectCount( XclExpObjList& rList )
{
return static_cast<sal_Int32>(std::count_if(rList.begin(), rList.end(),
[](const std::unique_ptr<XclObj>& rxObj) { return IsVmlObject( rxObj.get() ) || IsFormControlObject( rxObj.get() ); }));
}
bool IsValidObject( const XclObj& rObj )
{
if (rObj.GetObjType() == EXC_OBJTYPE_CHART)
{
// Chart object. Make sure it's a valid chart object. We skip
// invalid chart objects from exporting to prevent Excel from
// complaining on load.
const XclExpChartObj& rChartObj = static_cast<const XclExpChartObj&>(rObj);
uno::Reference<chart2::XChartDocument> xChartDoc(rChartObj.GetChartDoc(), uno::UNO_QUERY);
if (!xChartDoc.is())
return false;
uno::Reference<chart2::XDiagram> xDiagram = xChartDoc->getFirstDiagram();
if (!xDiagram.is())
return false;
uno::Reference<chart2::XCoordinateSystemContainer> xCooSysContainer(xDiagram, uno::UNO_QUERY);
if (!xCooSysContainer.is())
return false;
const uno::Sequence<uno::Reference<chart2::XCoordinateSystem>> xCooSysSeq = xCooSysContainer->getCoordinateSystems();
for (const auto& rCooSys : xCooSysSeq)
{
Reference<chart2::XChartTypeContainer> xChartTypeCont(rCooSys, uno::UNO_QUERY);
if (!xChartTypeCont.is())
return false;
uno::Sequence<uno::Reference<chart2::XChartType>> xChartTypeSeq = xChartTypeCont->getChartTypes();
if (!xChartTypeSeq.hasElements())
// No chart type. Not good.
return false;
}
}
return true;
}
void SaveDrawingMLObjects( XclExpObjList& rList, XclExpXmlStream& rStrm )
{
std::vector<XclObj*> aList;
// do not add objects to the list that are in the group,
// because the group already contains them. For this, count
// the next skipped objects, i.e. objects of a group,
// including objects of its subgroups
size_t nSkipObj = 0;
for (const auto& rxObj : rList)
{
// FIXME: Can DrawingML objects be grouped with VML or not valid objects?
if (IsVmlObject(rxObj.get()) || !IsValidObject(*rxObj))
continue;
if (nSkipObj == 0)
aList.push_back(rxObj.get());
else
--nSkipObj;
XclObjAny* pObj = nullptr;
if (rxObj->GetObjType() == 0) // group (it can be a subgroup)
pObj = dynamic_cast<XclObjAny*>(rxObj.get());
if (pObj)
{
css::uno::Reference<css::drawing::XShapes> xShapes(pObj->GetShape(), UNO_QUERY);
if (xShapes)
{
// skip (also) the objects of this group
nSkipObj += xShapes->getCount();
}
}
}
if (aList.empty())
return;
sal_Int32 nDrawing = drawingml::DrawingML::getNewDrawingUniqueId();
OUString sId;
// export in [Content_Types].xml
sax_fastparser::FSHelperPtr pDrawing = rStrm.CreateOutputStream(
XclXmlUtils::GetStreamName( "xl/", "drawings/drawing", nDrawing ),
XclXmlUtils::GetStreamName( "../", "drawings/drawing", nDrawing ),
rStrm.GetCurrentStream()->getOutputStream(),
"application/vnd.openxmlformats-officedocument.drawing+xml",
oox::getRelationship(Relationship::DRAWING),
&sId );
rStrm.GetCurrentStream()->singleElement(XML_drawing, FSNS(XML_r, XML_id), sId.toUtf8());
rStrm.PushStream( pDrawing );
pDrawing->startElement( FSNS( XML_xdr, XML_wsDr ),
FSNS(XML_xmlns, XML_xdr), rStrm.getNamespaceURL(OOX_NS(dmlSpreadDr)).toUtf8(),
FSNS(XML_xmlns, XML_a), rStrm.getNamespaceURL(OOX_NS(dml)).toUtf8(),
FSNS(XML_xmlns, XML_r), rStrm.getNamespaceURL(OOX_NS(officeRel)).toUtf8() );
sal_Int32 nShapeId = 1000; // unique id of the shape inside one worksheet (not the whole document)
for (const auto& rpObj : aList)
{
// validate shapeId
if ( IsFormControlObject( rpObj ) )
{
XclExpTbxControlObj* pXclExpTbxControlObj = dynamic_cast<XclExpTbxControlObj*>(rpObj);
if (pXclExpTbxControlObj)
{
pXclExpTbxControlObj->setShapeId(++nShapeId);
}
}
rpObj->SaveXml(rStrm);
}
pDrawing->endElement( FSNS( XML_xdr, XML_wsDr ) );
rStrm.PopStream();
}
void SaveFormControlObjects(XclExpObjList& rList, XclExpXmlStream& rStrm)
{
bool hasControls = false;
for (const auto& rxObj : rList)
{
if (IsFormControlObject(rxObj.get()))
{
hasControls = true;
break;
}
}
if (!hasControls)
{
return;
}
sax_fastparser::FSHelperPtr& rWorksheet = rStrm.GetCurrentStream();
rWorksheet->startElement(FSNS(XML_mc, XML_AlternateContent),
FSNS(XML_xmlns, XML_mc), rStrm.getNamespaceURL(OOX_NS(mce)).toUtf8());
rWorksheet->startElement(FSNS(XML_mc, XML_Choice), XML_Requires, "x14");
rWorksheet->startElement(XML_controls);
for (const auto& rxObj : rList)
{
if (IsFormControlObject(rxObj.get()))
{
XclExpTbxControlObj* pXclExpTbxControlObj = dynamic_cast<XclExpTbxControlObj*>(rxObj.get());
if (pXclExpTbxControlObj)
{
const OUString aIdFormControlPr = pXclExpTbxControlObj->SaveControlPropertiesXml(rStrm);
pXclExpTbxControlObj->SaveSheetXml(rStrm, aIdFormControlPr);
}
}
}
rWorksheet->endElement(XML_controls);
rWorksheet->endElement(FSNS(XML_mc, XML_Choice));
rWorksheet->endElement(FSNS(XML_mc, XML_AlternateContent));
}
void SaveVmlObjects( XclExpObjList& rList, XclExpXmlStream& rStrm )
{
if( GetVmlObjectCount( rList ) == 0 )
return;
sal_Int32 nDrawing = drawingml::DrawingML::getNewVMLUniqueId();
OUString sId;
sax_fastparser::FSHelperPtr pVmlDrawing = rStrm.CreateOutputStream(
XclXmlUtils::GetStreamName( "xl/", "drawings/vmlDrawing", nDrawing ),
XclXmlUtils::GetStreamName( "../", "drawings/vmlDrawing", nDrawing ),
rStrm.GetCurrentStream()->getOutputStream(),
"application/vnd.openxmlformats-officedocument.vmlDrawing",
oox::getRelationship(Relationship::VMLDRAWING),
&sId );
rStrm.GetCurrentStream()->singleElement(XML_legacyDrawing, FSNS(XML_r, XML_id), sId.toUtf8());
rStrm.PushStream( pVmlDrawing );
pVmlDrawing->write("<?xml version=\"1.0\" encoding=\"UTF-8\" standalone=\"yes\"?>\n");
pVmlDrawing->startElement( XML_xml,
FSNS(XML_xmlns, XML_v), rStrm.getNamespaceURL(OOX_NS(vml)).toUtf8(),
FSNS(XML_xmlns, XML_o), rStrm.getNamespaceURL(OOX_NS(vmlOffice)).toUtf8(),
FSNS(XML_xmlns, XML_x), rStrm.getNamespaceURL(OOX_NS(vmlExcel)).toUtf8(),
FSNS(XML_xmlns, XML_w10), rStrm.getNamespaceURL(OOX_NS(vmlWord)).toUtf8() );
for ( const auto& rxObj : rList )
{
if (IsFormControlObject(rxObj.get()))
{
auto pFormControlObject = dynamic_cast<XclExpTbxControlObj*>(rxObj.get());
if (pFormControlObject)
{
pFormControlObject->SaveVml(rStrm);
}
}
if( !IsVmlObject( rxObj.get() ) )
continue;
rxObj->SaveXml( rStrm );
}
pVmlDrawing->endElement( XML_xml );
rStrm.PopStream();
}
}
void XclExpObjList::SaveXml( XclExpXmlStream& rStrm )
{
if( pSolverContainer )
pSolverContainer->SaveXml( rStrm );
if( maObjs.empty())
return;
SaveDrawingMLObjects( *this, rStrm );
SaveVmlObjects( *this, rStrm );
SaveFormControlObjects( *this, rStrm );
}
// --- class XclObj --------------------------------------------------
XclObj::XclObj( XclExpObjectManager& rObjMgr, sal_uInt16 nObjType, bool bOwnEscher ) :
XclExpRecord( EXC_ID_OBJ, 26 ),
mrEscherEx( rObjMgr.GetEscherEx() ),
mnObjType( nObjType ),
nObjId(0),
nGrbit( 0x6011 ), // AutoLine, AutoFill, Printable, Locked
mnScTab(0),
bFirstOnSheet( !rObjMgr.HasObj() ),
mbOwnEscher( bOwnEscher )
{
//! first object continues the first MSODRAWING record
if ( bFirstOnSheet )
pMsodrawing = rObjMgr.GetMsodrawingPerSheet();
else
pMsodrawing = new XclExpMsoDrawing( mrEscherEx );
}
XclObj::~XclObj()
{
if ( !bFirstOnSheet )
delete pMsodrawing;
pClientTextbox.reset();
pTxo.reset();
}
void XclObj::ImplWriteAnchor( const SdrObject* pSdrObj, const tools::Rectangle* pChildAnchor )
{
if( pChildAnchor )
{
mrEscherEx.AddChildAnchor( *pChildAnchor );
}
else if( pSdrObj )
{
std::unique_ptr< XclExpDffAnchorBase > xDffAnchor( mrEscherEx.CreateDffAnchor( *pSdrObj ) );
xDffAnchor->WriteDffData( mrEscherEx );
}
}
void XclObj::SetEscherShapeType( sal_uInt16 nType )
{
//ToDo: what about the other defined or... types?
switch ( nType )
{
case ESCHER_ShpInst_Line :
mnObjType = EXC_OBJTYPE_LINE;
break;
case ESCHER_ShpInst_Rectangle :
case ESCHER_ShpInst_RoundRectangle :
mnObjType = EXC_OBJTYPE_RECTANGLE;
break;
case ESCHER_ShpInst_Ellipse :
mnObjType = EXC_OBJTYPE_OVAL;
break;
case ESCHER_ShpInst_Arc :
mnObjType = EXC_OBJTYPE_ARC;
break;
case ESCHER_ShpInst_TextBox :
mnObjType = EXC_OBJTYPE_TEXT;
break;
case ESCHER_ShpInst_PictureFrame :
mnObjType = EXC_OBJTYPE_PICTURE;
break;
default:
mnObjType = EXC_OBJTYPE_DRAWING;
}
}
void XclObj::SetText( const XclExpRoot& rRoot, const SdrTextObj& rObj )
{
OSL_ENSURE( !pClientTextbox, "XclObj::SetText: already set" );
if ( !pClientTextbox )
{
mrEscherEx.UpdateDffFragmentEnd();
pClientTextbox.reset( new XclExpMsoDrawing( mrEscherEx ) );
mrEscherEx.AddAtom( 0, ESCHER_ClientTextbox ); // TXO record
mrEscherEx.UpdateDffFragmentEnd();
pTxo.reset( new XclTxo( rRoot, rObj ) );
}
}
void XclObj::WriteBody( XclExpStream& rStrm )
{
OSL_ENSURE( mnObjType != EXC_OBJTYPE_UNKNOWN, "XclObj::WriteBody - unknown type" );
// create a substream to be able to create subrecords
SvMemoryStream aMemStrm;
std::optional< XclExpStream > pXclStrm( std::in_place, aMemStrm, rStrm.GetRoot() );
// write the ftCmo subrecord
pXclStrm->StartRecord( EXC_ID_OBJCMO, 18 );
*pXclStrm << mnObjType << nObjId << nGrbit;
pXclStrm->WriteZeroBytes( 12 );
pXclStrm->EndRecord();
// write other subrecords
WriteSubRecs( *pXclStrm );
// write the ftEnd subrecord
pXclStrm->StartRecord( EXC_ID_OBJEND, 0 );
pXclStrm->EndRecord();
// copy the data to the OBJ record
pXclStrm.reset();
aMemStrm.Seek( 0 );
rStrm.CopyFromStream( aMemStrm );
}
void XclObj::Save( XclExpStream& rStrm )
{
// MSODRAWING record (msofbtSpContainer)
if ( !bFirstOnSheet )
pMsodrawing->Save( rStrm );
// OBJ
XclExpRecord::Save( rStrm );
// second MSODRAWING record and TXO and CONTINUE records
SaveTextRecs( rStrm );
}
void XclObj::WriteSubRecs( XclExpStream& rStrm )
{
if( mnObjType != EXC_OBJTYPE_NOTE )
return;
// FtNts subrecord
AddRecSize( 26 );
// ft, cb
rStrm << EXC_ID_OBJNTS << sal_uInt16(0x0016);
sal_uInt8 aGUID[16];
rtl_createUuid( aGUID, nullptr, false );
// guid
rStrm.SetSliceSize( 16 );
for( int i = 0; i < 16; i++ )
rStrm << aGUID[i];
rStrm.SetSliceSize( 0 );
// fSharedNote
rStrm << sal_uInt16(0);
// unused
rStrm.WriteZeroBytes( 4 );
}
void XclObj::SaveTextRecs( XclExpStream& rStrm )
{
// MSODRAWING record (msofbtClientTextbox)
if ( pClientTextbox )
pClientTextbox->Save( rStrm );
// TXO and CONTINUE records
if ( pTxo )
pTxo->Save( rStrm );
}
// --- class XclObjComment ------------------------------------------
// tdf#118662 static helper to allow single function access as friend in SdrCaptionObj
void setSuppressGetBitmapFromXclObjComment(SdrCaptionObj* pSdrCaptionObj, bool bValue)
{
if(nullptr != pSdrCaptionObj)
{
pSdrCaptionObj->setSuppressGetBitmap(bValue);
}
}
XclObjComment::XclObjComment( XclExpObjectManager& rObjMgr, const tools::Rectangle& rRect, const EditTextObject& rEditObj, SdrCaptionObj* pCaption, bool bVisible, const ScAddress& rAddress, const tools::Rectangle &rFrom, const tools::Rectangle &rTo ) :
XclObj( rObjMgr, EXC_OBJTYPE_NOTE, true )
, maScPos( rAddress )
, mpCaption( pCaption )
, mbVisible( bVisible )
, maFrom ( rFrom )
, maTo ( rTo )
{
// tdf#118662 due to no longer cloning the SdrCaptionObj an old 'hack' using the
// fact that no Graphics gets created when a SdrObject is not inserted in a SdrPage
// does not work anymore. In SvxShape::GetBitmap that info was used, and here the
// SdrCaptionObj was cloned for the only reason to have one not added to a SdrPage.
// To emulate old behaviour, use a boolean flag at the SdrCaptionObj.
setSuppressGetBitmapFromXclObjComment(mpCaption, true);
ProcessEscherObj( rObjMgr.GetRoot(), rRect, pCaption, bVisible);
// TXO
pTxo .reset(new XclTxo( rObjMgr.GetRoot(), rEditObj, pCaption ));
}
static void lcl_FillProps( EscherPropertyContainer& rPropOpt, SdrObject* pCaption, bool bVisible )
{
if( pCaption )
{
Reference< XShape > aXShape = GetXShapeForSdrObject( pCaption );
Reference< XPropertySet > aXPropSet( aXShape, UNO_QUERY );
if( aXPropSet.is() )
{
rPropOpt.CreateFillProperties( aXPropSet, true);
rPropOpt.AddOpt( ESCHER_Prop_lTxid, 0 ); // undocumented
rPropOpt.AddOpt( 0x0158, 0x00000000 ); // undocumented
sal_uInt32 nValue = 0;
if( !rPropOpt.GetOpt( ESCHER_Prop_FitTextToShape, nValue ) )
rPropOpt.AddOpt( ESCHER_Prop_FitTextToShape, 0x00080008 ); // bool field
// Maybe the colour is the same as the 'ToolTip' System colour, but the tooltip
// colour shouldn't have influence on the fill colour of the exported shape
if( !rPropOpt.GetOpt( ESCHER_Prop_fillColor, nValue ) )
rPropOpt.AddOpt( ESCHER_Prop_fillColor, 0x08000050 );
if( !rPropOpt.GetOpt( ESCHER_Prop_fillBackColor, nValue ) )
rPropOpt.AddOpt( ESCHER_Prop_fillBackColor, 0x08000050 );
if( !rPropOpt.GetOpt( ESCHER_Prop_fNoFillHitTest, nValue ) )
rPropOpt.AddOpt( ESCHER_Prop_fNoFillHitTest, 0x00110010 ); // bool field
if( !rPropOpt.GetOpt( ESCHER_Prop_shadowColor, nValue ) )
rPropOpt.AddOpt( ESCHER_Prop_shadowColor, 0x00000000 );
if( !rPropOpt.GetOpt( ESCHER_Prop_fshadowObscured, nValue ) ) // bool field
rPropOpt.AddOpt( ESCHER_Prop_fshadowObscured, 0x00030003 ); // bool field
}
}
sal_uInt32 nFlags = 0x000A0000;
::set_flag( nFlags, sal_uInt32(2), !bVisible );
rPropOpt.AddOpt( ESCHER_Prop_fPrint, nFlags ); // bool field
}
void XclObjComment::ProcessEscherObj( const XclExpRoot& rRoot, const tools::Rectangle& rRect, SdrObject* pCaption, const bool bVisible )
{
EscherPropertyContainer aPropOpt;
lcl_FillProps( aPropOpt, pCaption, bVisible );
nGrbit = 0; // all off: AutoLine, AutoFill, Printable, Locked
mrEscherEx.OpenContainer( ESCHER_SpContainer );
mrEscherEx.AddShape( ESCHER_ShpInst_TextBox, ShapeFlag::HaveAnchor | ShapeFlag::HaveShapeProperty );
aPropOpt.Commit( mrEscherEx.GetStream() );
XclExpDffNoteAnchor( rRoot, rRect ).WriteDffData( mrEscherEx );
mrEscherEx.AddAtom( 0, ESCHER_ClientData ); // OBJ record
mrEscherEx.UpdateDffFragmentEnd();
//! Be sure to construct the MSODRAWING ClientTextbox record _after_ the
//! base OBJ's MSODRAWING record Escher data is completed.
pClientTextbox.reset( new XclExpMsoDrawing( mrEscherEx ) );
mrEscherEx.AddAtom( 0, ESCHER_ClientTextbox ); // TXO record
mrEscherEx.UpdateDffFragmentEnd();
mrEscherEx.CloseContainer(); // ESCHER_SpContainer
}
XclObjComment::~XclObjComment()
{
// tdf#118662 reset flag
setSuppressGetBitmapFromXclObjComment(mpCaption, false);
}
void XclObjComment::Save( XclExpStream& rStrm )
{
// content of this record
XclObj::Save( rStrm );
}
namespace {
class VmlCommentExporter : public VMLExport
{
ScAddress maScPos;
SdrCaptionObj* mpCaption;
bool mbVisible;
tools::Rectangle maFrom;
tools::Rectangle maTo;
public:
VmlCommentExporter ( const sax_fastparser::FSHelperPtr& p, const ScAddress& aScPos, SdrCaptionObj* pCaption, bool bVisible, const tools::Rectangle &aFrom, const tools::Rectangle &aTo );
protected:
virtual void Commit( EscherPropertyContainer& rProps, const tools::Rectangle& rRect ) override;
using VMLExport::StartShape;
virtual sal_Int32 StartShape() override;
using VMLExport::EndShape;
virtual void EndShape( sal_Int32 nShapeElement ) override;
};
}
VmlCommentExporter::VmlCommentExporter( const sax_fastparser::FSHelperPtr& p, const ScAddress& aScPos, SdrCaptionObj* pCaption,
bool bVisible, const tools::Rectangle &aFrom, const tools::Rectangle &aTo )
: VMLExport( p )
, maScPos( aScPos )
, mpCaption( pCaption )
, mbVisible( bVisible )
, maFrom ( aFrom )
, maTo ( aTo )
{
}
void VmlCommentExporter::Commit( EscherPropertyContainer& rProps, const tools::Rectangle& rRect )
{
lcl_FillProps( rProps, mpCaption, mbVisible );
rProps.AddOpt( ESCHER_Prop_fHidden, sal_uInt32(mbVisible) ); // bool field
// shadow property value for comment ( set in lcl_FillProps [*] ) has been
// overwritten by new value ( 0x20000 ) in the generic part of the export
// ( see EscherPropertyContainer::CreateShadowProperties )
// Safer option here is to just force the needed value here for oox vml
// export alone ( and avoid potential problems with binary export )
// #TODO investigate value of ESCHER_Prop_fshadowObscured generally
// in binary export ( if indeed this value is good for binary export )
// we can change the heuristics and/or initialisation path and get
// rid of line below.
// [*] lcl_FillProps seems to be called twice when exporting to xlsx
// once from XclObjComment::ProcessEscherObj #TODO look into that also
rProps.AddOpt( ESCHER_Prop_fshadowObscured, 0x00030003 ); // force value for comments
VMLExport::Commit( rProps, rRect );
}
sal_Int32 VmlCommentExporter::StartShape()
{
AddShapeAttribute( XML_type, "#_x0000_t202" );
sal_Int32 nId = VMLExport::StartShape();
return nId;
}
static const char* lcl_GetHorizAlignFromItemSetChar(const SfxItemSet& rItemSet)
{
switch (rItemSet.Get(EE_PARA_JUST).GetAdjust())
{
case SvxAdjust::Center:
return "Center";
case SvxAdjust::Right:
return "Right";
case SvxAdjust::Block:
return "Justify";
default:
return "Left";
}
}
static const char* lcl_GetVertAlignFromItemSetChar( const SfxItemSet& rItemSet )
{
switch( rItemSet.Get( SDRATTR_TEXT_VERTADJUST ).GetValue() )
{
case SDRTEXTVERTADJUST_CENTER:
return "Center";
case SDRTEXTVERTADJUST_BOTTOM:
return "Bottom";
case SDRTEXTVERTADJUST_BLOCK:
return "Justify";
case SDRTEXTVERTADJUST_TOP:
default:
return "Top";
}
}
void VmlCommentExporter::EndShape( sal_Int32 nShapeElement )
{
char pAnchor[100];
sax_fastparser::FSHelperPtr pVmlDrawing = GetFS();
snprintf( pAnchor, 100, "%" SAL_PRIdINT64 ", %" SAL_PRIdINT64 ", %" SAL_PRIdINT64 ", %" SAL_PRIdINT64 ", %" SAL_PRIdINT64 ", %" SAL_PRIdINT64 ", %" SAL_PRIdINT64 ", %" SAL_PRIdINT64,
sal_Int64(maFrom.Left()), sal_Int64(maFrom.Top()), sal_Int64(maFrom.Right()), sal_Int64(maFrom.Bottom()),
sal_Int64(maTo.Left()), sal_Int64(maTo.Top()), sal_Int64(maTo.Right()), sal_Int64(maTo.Bottom()) );
// Getting comment text alignments
const char* pVertAlign = lcl_GetVertAlignFromItemSetChar(mpCaption->GetMergedItemSet());
const char* pHorizAlign = lcl_GetHorizAlignFromItemSetChar(mpCaption->GetMergedItemSet());
pVmlDrawing->startElement(FSNS(XML_x, XML_ClientData), XML_ObjectType, "Note");
pVmlDrawing->singleElement(FSNS(XML_x, XML_MoveWithCells));
pVmlDrawing->singleElement(FSNS(XML_x, XML_SizeWithCells));
XclXmlUtils::WriteElement( pVmlDrawing, FSNS( XML_x, XML_Anchor ), pAnchor );
XclXmlUtils::WriteElement( pVmlDrawing, FSNS( XML_x, XML_AutoFill ), "False" );
XclXmlUtils::WriteElement( pVmlDrawing, FSNS( XML_x, XML_TextVAlign ), pVertAlign );
XclXmlUtils::WriteElement( pVmlDrawing, FSNS( XML_x, XML_TextHAlign ), pHorizAlign );
XclXmlUtils::WriteElement( pVmlDrawing, FSNS( XML_x, XML_Row ), maScPos.Row() );
XclXmlUtils::WriteElement( pVmlDrawing, FSNS(XML_x, XML_Column), sal_Int32(maScPos.Col()));
if(mbVisible)
pVmlDrawing->singleElement(FSNS(XML_x, XML_Visible));
pVmlDrawing->endElement( FSNS( XML_x, XML_ClientData ) );
VMLExport::EndShape( nShapeElement );
}
void XclObjComment::SaveXml( XclExpXmlStream& rStrm )
{
VmlCommentExporter aCommentExporter( rStrm.GetCurrentStream(), maScPos, mpCaption, mbVisible, maFrom, maTo );
aCommentExporter.AddSdrObject( *mpCaption );
}
// --- class XclObjDropDown ------------------------------------------
XclObjDropDown::XclObjDropDown( XclExpObjectManager& rObjMgr, const ScAddress& rPos, bool bFilt ) :
XclObj( rObjMgr, EXC_OBJTYPE_DROPDOWN, true ),
bIsFiltered( bFilt )
{
SetLocked( true );
SetPrintable( false );
SetAutoFill( true );
SetAutoLine( false );
nGrbit |= 0x0100; // undocumented
mrEscherEx.OpenContainer( ESCHER_SpContainer );
mrEscherEx.AddShape( ESCHER_ShpInst_HostControl, ShapeFlag::HaveAnchor | ShapeFlag::HaveShapeProperty );
EscherPropertyContainer aPropOpt;
aPropOpt.AddOpt( ESCHER_Prop_LockAgainstGrouping, 0x01040104 ); // bool field
aPropOpt.AddOpt( ESCHER_Prop_FitTextToShape, 0x00080008 ); // bool field
aPropOpt.AddOpt( ESCHER_Prop_fNoFillHitTest, 0x00010000 ); // bool field
aPropOpt.AddOpt( ESCHER_Prop_fNoLineDrawDash, 0x00080000 ); // bool field
aPropOpt.AddOpt( ESCHER_Prop_fPrint, 0x000A0000 ); // bool field
aPropOpt.Commit( mrEscherEx.GetStream() );
XclExpDffDropDownAnchor( rObjMgr.GetRoot(), rPos ).WriteDffData( mrEscherEx );
mrEscherEx.AddAtom( 0, ESCHER_ClientData ); // OBJ record
mrEscherEx.UpdateDffFragmentEnd();
mrEscherEx.CloseContainer(); // ESCHER_SpContainer
// old size + ftSbs + ftLbsData
AddRecSize( 24 + 20 );
}
XclObjDropDown::~XclObjDropDown()
{
}
void XclObjDropDown::WriteSubRecs( XclExpStream& rStrm )
{
// ftSbs subrecord - Scroll bars (dummy)
rStrm.StartRecord( EXC_ID_OBJSBS, 20 );
rStrm.WriteZeroBytes( 20 );
rStrm.EndRecord();
// ftLbsData subrecord - Listbox data
sal_uInt16 nDropDownFlags = 0;
::insert_value( nDropDownFlags, EXC_OBJ_DROPDOWN_SIMPLE, 0, 2 );
::set_flag( nDropDownFlags, EXC_OBJ_DROPDOWN_FILTERED, bIsFiltered );
rStrm.StartRecord( EXC_ID_OBJLBSDATA, 16 );
rStrm << sal_uInt32(0) << sal_uInt16(0) << sal_uInt16(0x0301) << sal_uInt16(0)
<< nDropDownFlags << sal_uInt16( 20 ) << sal_uInt16( 130 );
rStrm.EndRecord();
}
// --- class XclTxo --------------------------------------------------
static sal_uInt8 lcl_GetHorAlignFromItemSet( const SfxItemSet& rItemSet )
{
sal_uInt8 nHorAlign = EXC_OBJ_HOR_LEFT;
switch( rItemSet.Get( EE_PARA_JUST ).GetAdjust() )
{
case SvxAdjust::Left: nHorAlign = EXC_OBJ_HOR_LEFT; break;
case SvxAdjust::Center: nHorAlign = EXC_OBJ_HOR_CENTER; break;
case SvxAdjust::Right: nHorAlign = EXC_OBJ_HOR_RIGHT; break;
case SvxAdjust::Block: nHorAlign = EXC_OBJ_HOR_JUSTIFY; break;
default:;
}
return nHorAlign;
}
static sal_uInt8 lcl_GetVerAlignFromItemSet( const SfxItemSet& rItemSet )
{
sal_uInt8 nVerAlign = EXC_OBJ_VER_TOP;
switch( rItemSet.Get( SDRATTR_TEXT_VERTADJUST ).GetValue() )
{
case SDRTEXTVERTADJUST_TOP: nVerAlign = EXC_OBJ_VER_TOP; break;
case SDRTEXTVERTADJUST_CENTER: nVerAlign = EXC_OBJ_VER_CENTER; break;
case SDRTEXTVERTADJUST_BOTTOM: nVerAlign = EXC_OBJ_VER_BOTTOM; break;
case SDRTEXTVERTADJUST_BLOCK: nVerAlign = EXC_OBJ_VER_JUSTIFY; break;
default:;
}
return nVerAlign;
}
XclTxo::XclTxo( const OUString& rString, sal_uInt16 nFontIx ) :
mpString( std::make_shared<XclExpString>( rString ) ),
mnRotation( EXC_OBJ_ORIENT_NONE ),
mnHorAlign( EXC_OBJ_HOR_LEFT ),
mnVerAlign( EXC_OBJ_VER_TOP )
{
if( mpString->Len() )
{
// If there is text, Excel *needs* the 2nd CONTINUE record with at least two format runs
mpString->AppendFormat( 0, nFontIx );
mpString->AppendFormat( mpString->Len(), EXC_FONT_APP );
}
}
XclTxo::XclTxo( const XclExpRoot& rRoot, const SdrTextObj& rTextObj ) :
mpString( XclExpStringHelper::CreateString( rRoot, rTextObj ) ),
mnRotation( EXC_OBJ_ORIENT_NONE ),
mnHorAlign( EXC_OBJ_HOR_LEFT ),
mnVerAlign( EXC_OBJ_VER_TOP )
{
// additional alignment and orientation items
const SfxItemSet& rItemSet = rTextObj.GetMergedItemSet();
// horizontal alignment
SetHorAlign( lcl_GetHorAlignFromItemSet( rItemSet ) );
// vertical alignment
SetVerAlign( lcl_GetVerAlignFromItemSet( rItemSet ) );
// rotation
Degree100 nAngle = rTextObj.GetRotateAngle();
if( (4500_deg100 < nAngle) && (nAngle < 13500_deg100) )
mnRotation = EXC_OBJ_ORIENT_90CCW;
else if( (22500_deg100 < nAngle) && (nAngle < 31500_deg100) )
mnRotation = EXC_OBJ_ORIENT_90CW;
else
mnRotation = EXC_OBJ_ORIENT_NONE;
}
XclTxo::XclTxo( const XclExpRoot& rRoot, const EditTextObject& rEditObj, SdrObject* pCaption ) :
mpString( XclExpStringHelper::CreateString( rRoot, rEditObj ) ),
mnRotation( EXC_OBJ_ORIENT_NONE ),
mnHorAlign( EXC_OBJ_HOR_LEFT ),
mnVerAlign( EXC_OBJ_VER_TOP )
{
if(!pCaption)
return;
// Excel has one alignment per NoteObject while Calc supports
// one alignment per paragraph - use the first paragraph
// alignment (if set) as our overall alignment.
if( rEditObj.HasText( 0 ) )
{
const SfxItemSet& aSet( rEditObj.GetParaAttribs( 0));
if( const SvxAdjustItem* pItem = aSet.GetItemIfSet( EE_PARA_JUST ) )
{
SvxAdjust eEEAlign = pItem->GetAdjust();
pCaption->SetMergedItem( SvxAdjustItem( eEEAlign, EE_PARA_JUST ) );
}
}
const SfxItemSet& rItemSet = pCaption->GetMergedItemSet();
// horizontal alignment
SetHorAlign( lcl_GetHorAlignFromItemSet( rItemSet ) );
// vertical alignment
SetVerAlign( lcl_GetVerAlignFromItemSet( rItemSet ) );
// orientation alignment
const SvxWritingModeItem& rItem = rItemSet.Get( SDRATTR_TEXTDIRECTION );
if( rItem.GetValue() == css::text::WritingMode_TB_RL )
mnRotation = EXC_OBJ_ORIENT_90CW;
}
void XclTxo::SaveCont( XclExpStream& rStrm )
{
OSL_ENSURE( mpString, "XclTxo::SaveCont - missing string" );
// #i96858# do not save existing string formatting if text is empty
sal_uInt16 nRunLen = mpString->IsEmpty() ? 0 : (8 * mpString->GetFormatsCount());
// alignment
sal_uInt16 nFlags = 0;
::insert_value( nFlags, mnHorAlign, 1, 3 );
::insert_value( nFlags, mnVerAlign, 4, 3 );
rStrm << nFlags << mnRotation;
rStrm.WriteZeroBytes( 6 );
rStrm << mpString->Len() << nRunLen << sal_uInt32( 0 );
}
void XclTxo::Save( XclExpStream& rStrm )
{
// Write the TXO part
ExcRecord::Save( rStrm );
// CONTINUE records are only written if there is some text
if( mpString->IsEmpty() )
return;
// CONTINUE for character array
rStrm.StartRecord( EXC_ID_CONT, mpString->GetBufferSize() + 1 );
rStrm << static_cast< sal_uInt8 >( mpString->GetFlagField() & EXC_STRF_16BIT ); // only Unicode flag
mpString->WriteBuffer( rStrm );
rStrm.EndRecord();
// CONTINUE for formatting runs
rStrm.StartRecord( EXC_ID_CONT, 8 * mpString->GetFormatsCount() );
const XclFormatRunVec& rFormats = mpString->GetFormats();
for( const auto& rFormat : rFormats )
rStrm << rFormat.mnChar << rFormat.mnFontIdx << sal_uInt32( 0 );
rStrm.EndRecord();
}
sal_uInt16 XclTxo::GetNum() const
{
return EXC_ID_TXO;
}
std::size_t XclTxo::GetLen() const
{
return 18;
}
// --- class XclObjOle -------------------------------------------
XclObjOle::XclObjOle( XclExpObjectManager& rObjMgr, const SdrOle2Obj& rObj ) :
XclObj( rObjMgr, EXC_OBJTYPE_PICTURE ),
rOleObj( rObj ),
pRootStorage( rObjMgr.GetRoot().GetRootStorage().get() )
{
}
XclObjOle::~XclObjOle()
{
}
void XclObjOle::WriteSubRecs( XclExpStream& rStrm )
{
// write only as embedded, not linked
OUString aStorageName( u"MBD"_ustr );
char aBuf[ sizeof(sal_uInt32) * 2 + 1 ];
// FIXME Eeek! Is this just a way to get a unique id?
sal_uInt32 nPictureId = sal_uInt32(reinterpret_cast<sal_uIntPtr>(this) >> 2);
o3tl::sprintf( aBuf, "%08X", static_cast< unsigned int >( nPictureId ) );
aStorageName += OUString::createFromAscii(aBuf);
rtl::Reference<SotStorage> xOleStg = pRootStorage->OpenSotStorage(aStorageName);
if( !xOleStg.is() )
return;
uno::Reference < embed::XEmbeddedObject > xObj( rOleObj.GetObjRef() );
if ( !xObj.is() )
return;
// set version to "old" version, because it must be
// saved in MS notation.
sal_uInt32 nFl = 0;
if( officecfg::Office::Common::Filter::Microsoft::Export::MathToMathType::get() )
nFl |= OLE_STARMATH_2_MATHTYPE;
if( officecfg::Office::Common::Filter::Microsoft::Export::WriterToWinWord::get() )
nFl |= OLE_STARWRITER_2_WINWORD;
if( officecfg::Office::Common::Filter::Microsoft::Export::CalcToExcel::get() )
nFl |= OLE_STARCALC_2_EXCEL;
if( officecfg::Office::Common::Filter::Microsoft::Export::ImpressToPowerPoint::get() )
nFl |= OLE_STARIMPRESS_2_POWERPOINT;
SvxMSExportOLEObjects aOLEExpFilt( nFl );
aOLEExpFilt.ExportOLEObject( xObj, *xOleStg );
// OBJCF subrecord, undocumented as usual
rStrm.StartRecord( EXC_ID_OBJCF, 2 );
rStrm << sal_uInt16(0x0002);
rStrm.EndRecord();
// OBJFLAGS subrecord, undocumented as usual
rStrm.StartRecord( EXC_ID_OBJFLAGS, 2 );
sal_uInt16 nFlags = EXC_OBJ_PIC_MANUALSIZE;
::set_flag( nFlags, EXC_OBJ_PIC_SYMBOL, rOleObj.GetAspect() == embed::Aspects::MSOLE_ICON );
rStrm << nFlags;
rStrm.EndRecord();
// OBJPICTFMLA subrecord, undocumented as usual
XclExpString aName( xOleStg->GetUserName() );
sal_uInt16 nPadLen = static_cast<sal_uInt16>(aName.GetSize() & 0x01);
sal_uInt16 nFmlaLen = static_cast< sal_uInt16 >( 12 + aName.GetSize() + nPadLen );
sal_uInt16 nSubRecLen = nFmlaLen + 6;
rStrm.StartRecord( EXC_ID_OBJPICTFMLA, nSubRecLen );
rStrm << nFmlaLen
<< sal_uInt16( 5 ) << sal_uInt32( 0 ) << sal_uInt8( 2 )
<< sal_uInt32( 0 ) << sal_uInt8( 3 )
<< aName;
if( nPadLen )
rStrm << sal_uInt8( 0 ); // pad byte
rStrm << nPictureId;
rStrm.EndRecord();
}
void XclObjOle::Save( XclExpStream& rStrm )
{
// content of this record
XclObj::Save( rStrm );
}
// --- class XclObjAny -------------------------------------------
XclObjAny::XclObjAny( XclExpObjectManager& rObjMgr, const Reference< XShape >& rShape, ScDocument* pDoc )
: XclObj( rObjMgr, EXC_OBJTYPE_UNKNOWN )
, mxShape( rShape )
, mpDoc(pDoc)
{
}
XclObjAny::~XclObjAny()
{
}
void XclObjAny::WriteSubRecs( XclExpStream& rStrm )
{
if( mnObjType == EXC_OBJTYPE_GROUP )
// ftGmo subrecord
rStrm << EXC_ID_OBJGMO << sal_uInt16(2) << sal_uInt16(0);
}
void XclObjAny::Save( XclExpStream& rStrm )
{
if( mnObjType == EXC_OBJTYPE_GROUP )
// old size + ftGmo
AddRecSize( 6 );
// content of this record
XclObj::Save( rStrm );
}
// --- class ExcBof8_Base --------------------------------------------
ExcBof8_Base::ExcBof8_Base()
{
nVers = 0x0600;
nRupBuild = 0x0dbb;
nRupYear = 0x07cc;
}
void XclObjAny::WriteFromTo( XclExpXmlStream& rStrm, const Reference< XShape >& rShape, SCTAB nTab )
{
sax_fastparser::FSHelperPtr pDrawing = rStrm.GetCurrentStream();
awt::Point aTopLeft = rShape->getPosition();
awt::Size aSize = rShape->getSize();
// There are a few cases where we must adjust these values
// Do not adjust objects, which have rotation incorporated into their points
// but report a rotation angle nevertheless.
SdrObject* pObj = SdrObject::getSdrObjectFromXShape(rShape);
if (pObj && pObj->GetObjIdentifier() != SdrObjKind::Line && pObj->GetObjIdentifier() != SdrObjKind::PolyLine
&& pObj->GetObjIdentifier() != SdrObjKind::PathLine && pObj->GetObjIdentifier() != SdrObjKind::FreehandLine
&& pObj->GetObjIdentifier() != SdrObjKind::PathPolyLine)
{
Degree100 nRotation = NormAngle36000(pObj->GetRotateAngle());
if (nRotation)
{
sal_Int16 nHalfWidth = aSize.Width / 2;
sal_Int16 nHalfHeight = aSize.Height / 2;
// Center of bounding box of the rotated shape
const auto aSnapRectCenter(pObj->GetSnapRect().Center());
aTopLeft.X = aSnapRectCenter.X() - nHalfWidth;
aTopLeft.Y = aSnapRectCenter.Y() - nHalfHeight;
// MSO changes the anchor positions at these angles and that does an extra 90 degrees
// rotation on our shapes, so we output it in such position that MSO
// can draw this shape correctly.
if ((nRotation > 4500_deg100 && nRotation <= 13500_deg100) || (nRotation > 22500_deg100 && nRotation <= 31500_deg100))
{
aTopLeft.X = aTopLeft.X - nHalfHeight + nHalfWidth;
aTopLeft.Y = aTopLeft.Y - nHalfWidth + nHalfHeight;
std::swap(aSize.Width, aSize.Height);
}
}
}
tools::Rectangle aLocation( aTopLeft.X, aTopLeft.Y, aTopLeft.X + aSize.Width, aTopLeft.Y + aSize.Height );
ScRange aRange = rStrm.GetRoot().GetDoc().GetRange( nTab, aLocation );
tools::Rectangle aRangeRect = rStrm.GetRoot().GetDoc().GetMMRect( aRange.aStart.Col(), aRange.aStart.Row(),
aRange.aEnd.Col()-1, aRange.aEnd.Row()-1,
nTab );
pDrawing->startElement(FSNS(XML_xdr, XML_from));
XclXmlUtils::WriteElement( pDrawing, FSNS( XML_xdr, XML_col ), static_cast<sal_Int32>(aRange.aStart.Col()) );
XclXmlUtils::WriteElement( pDrawing, FSNS( XML_xdr, XML_colOff ),
oox::drawingml::convertHmmToEmu( aLocation.Left() - aRangeRect.Left() ) );
XclXmlUtils::WriteElement( pDrawing, FSNS( XML_xdr, XML_row ), static_cast<sal_Int32>(aRange.aStart.Row()) );
XclXmlUtils::WriteElement( pDrawing, FSNS( XML_xdr, XML_rowOff ),
oox::drawingml::convertHmmToEmu( aLocation.Top() - aRangeRect.Top() ) );
pDrawing->endElement( FSNS( XML_xdr, XML_from ) );
pDrawing->startElement(FSNS(XML_xdr, XML_to));
XclXmlUtils::WriteElement( pDrawing, FSNS( XML_xdr, XML_col ), static_cast<sal_Int32>(aRange.aEnd.Col()) );
XclXmlUtils::WriteElement( pDrawing, FSNS( XML_xdr, XML_colOff ),
oox::drawingml::convertHmmToEmu( aLocation.Right() - aRangeRect.Right() ) );
XclXmlUtils::WriteElement( pDrawing, FSNS( XML_xdr, XML_row ), static_cast<sal_Int32>(aRange.aEnd.Row()) );
XclXmlUtils::WriteElement( pDrawing, FSNS( XML_xdr, XML_rowOff ),
oox::drawingml::convertHmmToEmu( aLocation.Bottom() - aRangeRect.Bottom() ) );
pDrawing->endElement( FSNS( XML_xdr, XML_to ) );
}
void XclObjAny::WriteFromTo( XclExpXmlStream& rStrm, const XclObjAny& rObj )
{
WriteFromTo( rStrm, rObj.GetShape(), rObj.GetTab() );
}
static const char*
GetEditAs( const XclObjAny& rObj )
{
if( const SdrObject* pShape = EscherEx::GetSdrObject( rObj.GetShape() ) )
{
switch( ScDrawLayer::GetAnchorType( *pShape ) )
{
case SCA_CELL:
return "oneCell";
case SCA_CELL_RESIZE:
return "twoCell";
default:
case SCA_PAGE:
break; // absolute
}
}
return "absolute";
}
namespace {
ScRefFlags parseRange(const OUString& rString, ScRange& rRange, const ScDocument& rDoc)
{
// start with the address convention set in the document
formula::FormulaGrammar::AddressConvention eConv = rDoc.GetAddressConvention();
ScRefFlags nResult = rRange.Parse(rString, rDoc, eConv);
if ( nResult & ScRefFlags::VALID )
return nResult;
// try the default calc address convention
nResult = rRange.Parse(rString, rDoc);
if ( nResult & ScRefFlags::VALID )
return nResult;
// try excel a1
nResult = rRange.Parse(rString, rDoc, formula::FormulaGrammar::CONV_XL_A1);
if ( nResult & ScRefFlags::VALID )
return nResult;
// try r1c1
return rRange.Parse(rString, rDoc, formula::FormulaGrammar::CONV_XL_R1C1);
}
ScRefFlags parseAddress(const OUString& rString, ScAddress& rAddress, const ScDocument& rDoc)
{
// start with the address convention set in the document
formula::FormulaGrammar::AddressConvention eConv = rDoc.GetAddressConvention();
ScRefFlags nResult = rAddress.Parse(rString, rDoc, eConv);
if ( nResult & ScRefFlags::VALID )
return nResult;
// try the default calc address convention
nResult = rAddress.Parse(rString, rDoc);
if ( nResult & ScRefFlags::VALID )
return nResult;
// try excel a1
nResult = rAddress.Parse(rString, rDoc, formula::FormulaGrammar::CONV_XL_A1);
if ( nResult & ScRefFlags::VALID )
return nResult;
// try r1c1
return rAddress.Parse(rString, rDoc, formula::FormulaGrammar::CONV_XL_R1C1);
}
void transformURL(const OUString& rOldURL, OUString& rNewURL, const ScDocument& rDoc)
{
if (rOldURL.startsWith("#"))
{
// URL has to be decoded for escaped characters (%20)
OUString aURL = INetURLObject::decode( rOldURL,
INetURLObject::DecodeMechanism::WithCharset );
OUString aAddressString = aURL.copy(1);
ScRange aRange;
ScRefFlags nResult = parseRange(aAddressString, aRange, rDoc);
if ( nResult & ScRefFlags::VALID )
{
OUString aString = aRange.Format(rDoc, nResult, formula::FormulaGrammar::CONV_XL_OOX);
rNewURL = "#" + aString;
return;
}
else
{
ScAddress aAddress;
nResult = parseAddress(aAddressString, aAddress, rDoc);
if( nResult & ScRefFlags::VALID )
{
OUString aString = aAddress.Format(nResult, &rDoc, formula::FormulaGrammar::CONV_XL_OOX);
rNewURL = "#" + aString;
return;
}
}
}
rNewURL = rOldURL;
}
}
ScURLTransformer::ScURLTransformer(ScDocument& rDoc)
: mrDoc(rDoc)
{
}
OUString ScURLTransformer::getTransformedString(const OUString& rURL) const
{
OUString aNewURL;
transformURL(rURL, aNewURL, mrDoc);
return aNewURL;
}
bool ScURLTransformer::isExternalURL(const OUString& rURL) const
{
return !rURL.startsWith("#");
}
void XclObjAny::SaveXml( XclExpXmlStream& rStrm )
{
// Do not output any of the detective shapes and validation circles.
SdrObject* pObject = SdrObject::getSdrObjectFromXShape(mxShape);
if (pObject)
{
ScDocument& rDoc = rStrm.GetRoot().GetDoc();
ScDetectiveFunc aDetFunc(rDoc, mnScTab);
ScAddress aPosition;
ScRange aSourceRange;
bool bRedLine;
ScDetectiveObjType eObjType
= aDetFunc.GetDetectiveObjectType(pObject, mnScTab, aPosition, aSourceRange, bRedLine);
if (eObjType != SC_DETOBJ_NONE)
return;
}
sax_fastparser::FSHelperPtr pDrawing = rStrm.GetCurrentStream();
ShapeExport aDML(XML_xdr, pDrawing, nullptr, &rStrm, drawingml::DOCUMENT_XLSX);
auto pURLTransformer = std::make_shared<ScURLTransformer>(*mpDoc);
aDML.SetURLTranslator(pURLTransformer);
pDrawing->startElement( FSNS( XML_xdr, XML_twoCellAnchor ), // OOXTODO: oneCellAnchor, absoluteAnchor
XML_editAs, GetEditAs( *this ) );
Reference< XPropertySet > xPropSet( mxShape, UNO_QUERY );
if (xPropSet.is())
{
WriteFromTo( rStrm, *this );
aDML.WriteShape( mxShape );
}
pDrawing->singleElement( FSNS( XML_xdr, XML_clientData)
// OOXTODO: XML_fLocksWithSheet
// OOXTODO: XML_fPrintsWithSheet
);
pDrawing->endElement( FSNS( XML_xdr, XML_twoCellAnchor ) );
}
void ExcBof8_Base::SaveCont( XclExpStream& rStrm )
{
rStrm.DisableEncryption();
rStrm << nVers << nDocType << nRupBuild << nRupYear
<< sal_uInt32(0)/*nFileHistory*/
<< sal_uInt32(0x06) /*nLowestBiffVer = Biff8*/;
}
sal_uInt16 ExcBof8_Base::GetNum() const
{
return 0x0809;
}
std::size_t ExcBof8_Base::GetLen() const
{
return 16;
}
// --- class ExcBof8 -------------------------------------------------
ExcBof8::ExcBof8()
{
nDocType = 0x0010;
}
// --- class ExcBofW8 ------------------------------------------------
ExcBofW8::ExcBofW8()
{
nDocType = 0x0005;
}
// --- class ExcBundlesheet8 -----------------------------------------
ExcBundlesheet8::ExcBundlesheet8( const RootData& rRootData, SCTAB _nTab ) :
ExcBundlesheetBase( rRootData, static_cast<sal_uInt16>(_nTab) ),
sUnicodeName( rRootData.pER->GetTabInfo().GetScTabName( _nTab ) )
{
}
ExcBundlesheet8::ExcBundlesheet8( OUString aString ) :
sUnicodeName(std::move( aString ))
{
}
void ExcBundlesheet8::SaveCont( XclExpStream& rStrm )
{
m_nOwnPos = rStrm.GetSvStreamPos();
// write dummy position, real position comes later
rStrm.DisableEncryption();
rStrm << sal_uInt32(0);
rStrm.EnableEncryption();
rStrm << nGrbit << GetName();
}
std::size_t ExcBundlesheet8::GetLen() const
{ // Text max 255 chars
return 8 + GetName().GetBufferSize();
}
void ExcBundlesheet8::SaveXml( XclExpXmlStream& rStrm )
{
OUString sId;
rStrm.CreateOutputStream(
XclXmlUtils::GetStreamName( "xl/", "worksheets/sheet", nTab+1),
XclXmlUtils::GetStreamName( nullptr, "worksheets/sheet", nTab+1),
rStrm.GetCurrentStream()->getOutputStream(),
"application/vnd.openxmlformats-officedocument.spreadsheetml.worksheet+xml",
oox::getRelationship(Relationship::WORKSHEET),
&sId );
rStrm.GetCurrentStream()->singleElement( XML_sheet,
XML_name, sUnicodeName.toUtf8(),
XML_sheetId, OString::number( nTab+1 ),
XML_state, nGrbit == 0x0000 ? "visible" : "hidden",
FSNS( XML_r, XML_id ), sId.toUtf8() );
}
// --- class XclObproj -----------------------------------------------
sal_uInt16 XclObproj::GetNum() const
{
return 0x00D3;
}
std::size_t XclObproj::GetLen() const
{
return 0;
}
// ---- class XclCodename --------------------------------------------
XclCodename::XclCodename( const OUString& r ) : aName( r )
{
}
void XclCodename::SaveCont( XclExpStream& rStrm )
{
rStrm << aName;
}
sal_uInt16 XclCodename::GetNum() const
{
return 0x01BA;
}
std::size_t XclCodename::GetLen() const
{
return aName.GetSize();
}
// ---- Scenarios ----------------------------------------------------
ExcEScenarioCell::ExcEScenarioCell( sal_uInt16 nC, sal_uInt16 nR, const OUString& rTxt ) :
nCol( nC ),
nRow( nR ),
sText( rTxt, XclStrFlags::NONE, 255 )
{
}
void ExcEScenarioCell::WriteAddress( XclExpStream& rStrm ) const
{
rStrm << nRow << nCol;
}
void ExcEScenarioCell::WriteText( XclExpStream& rStrm ) const
{
rStrm << sText;
}
void ExcEScenarioCell::SaveXml( XclExpXmlStream& rStrm ) const
{
rStrm.GetCurrentStream()->singleElement( XML_inputCells,
// OOXTODO: XML_deleted,
// OOXTODO: XML_numFmtId,
XML_r, XclXmlUtils::ToOString( rStrm.GetRoot().GetDoc(), ScRange( ScAddress( nCol, nRow, 0 ) ) ),
// OOXTODO: XML_undone,
XML_val, XclXmlUtils::ToOString( sText ) );
}
ExcEScenario::ExcEScenario( const XclExpRoot& rRoot, SCTAB nTab )
{
OUString sTmpName;
OUString sTmpComm;
OUString aTmp;
Color aDummyCol;
ScScenarioFlags nFlags;
ScDocument& rDoc = rRoot.GetDoc();
rDoc.GetName(nTab, aTmp);
sTmpName = aTmp;
sName.Assign( sTmpName, XclStrFlags::EightBitLength );
nRecLen = 8 + sName.GetBufferSize();
rDoc.GetScenarioData( nTab, aTmp, aDummyCol, nFlags );
sTmpComm = aTmp;
sComment.Assign( sTmpComm, XclStrFlags::NONE, 255 );
if( sComment.Len() )
nRecLen += sComment.GetSize();
bProtected = (nFlags & ScScenarioFlags::Protected) != ScScenarioFlags::NONE;
sUserName.Assign( rRoot.GetUserName(), XclStrFlags::NONE, 255 );
nRecLen += sUserName.GetSize();
const ScRangeList* pRList = rDoc.GetScenarioRanges( nTab );
if( !pRList )
return;
bool bContLoop = true;
SCROW nRow;
SCCOL nCol;
OUString sText;
double fVal;
for( size_t nRange = 0; (nRange < pRList->size()) && bContLoop; nRange++ )
{
const ScRange & rRange = (*pRList)[nRange];
for( nRow = rRange.aStart.Row(); (nRow <= rRange.aEnd.Row()) && bContLoop; nRow++ )
for( nCol = rRange.aStart.Col(); (nCol <= rRange.aEnd.Col()) && bContLoop; nCol++ )
{
if( rDoc.HasValueData( nCol, nRow, nTab ) )
{
fVal = rDoc.GetValue( nCol, nRow, nTab );
sText = ::rtl::math::doubleToUString( fVal,
rtl_math_StringFormat_Automatic,
rtl_math_DecimalPlaces_Max,
ScGlobal::getLocaleData().getNumDecimalSep()[0],
true );
}
else
sText = rDoc.GetString(nCol, nRow, nTab);
bContLoop = Append( static_cast<sal_uInt16>(nCol),
static_cast<sal_uInt16>(nRow), sText );
}
}
}
bool ExcEScenario::Append( sal_uInt16 nCol, sal_uInt16 nRow, const OUString& rTxt )
{
if( aCells.size() == EXC_SCEN_MAXCELL )
return false;
ExcEScenarioCell aCell(nCol, nRow, rTxt);
aCells.push_back(aCell);
nRecLen += 6 + aCell.GetStringBytes(); // 4 bytes address, 2 bytes ifmt
return true;
}
void ExcEScenario::SaveCont( XclExpStream& rStrm )
{
sal_uInt16 count = aCells.size();
rStrm << count // number of cells
<< sal_uInt8(bProtected) // fProtection
<< sal_uInt8(0) // fHidden
<< static_cast<sal_uInt8>(sName.Len()) // length of scen name
<< static_cast<sal_uInt8>(sComment.Len()) // length of comment
<< static_cast<sal_uInt8>(sUserName.Len()); // length of user name
sName.WriteFlagField( rStrm );
sName.WriteBuffer( rStrm );
rStrm << sUserName;
if( sComment.Len() )
rStrm << sComment;
for( const auto& rCell : aCells )
rCell.WriteAddress( rStrm ); // pos of cell
for( const auto& rCell : aCells )
rCell.WriteText( rStrm ); // string content
rStrm.SetSliceSize( 2 );
rStrm.WriteZeroBytes( 2 * count ); // date format
}
sal_uInt16 ExcEScenario::GetNum() const
{
return 0x00AF;
}
std::size_t ExcEScenario::GetLen() const
{
return nRecLen;
}
void ExcEScenario::SaveXml( XclExpXmlStream& rStrm )
{
sax_fastparser::FSHelperPtr& rWorkbook = rStrm.GetCurrentStream();
rWorkbook->startElement( XML_scenario,
XML_name, XclXmlUtils::ToOString( sName ),
XML_locked, ToPsz( bProtected ),
// OOXTODO: XML_hidden,
XML_count, OString::number( aCells.size() ),
XML_user, XESTRING_TO_PSZ( sUserName ),
XML_comment, XESTRING_TO_PSZ( sComment ) );
for( const auto& rCell : aCells )
rCell.SaveXml( rStrm );
rWorkbook->endElement( XML_scenario );
}
ExcEScenarioManager::ExcEScenarioManager( const XclExpRoot& rRoot, SCTAB nTab ) :
nActive( 0 )
{
ScDocument& rDoc = rRoot.GetDoc();
if( rDoc.IsScenario( nTab ) )
return;
SCTAB nFirstTab = nTab + 1;
SCTAB nNewTab = nFirstTab;
while( rDoc.IsScenario( nNewTab ) )
{
aScenes.emplace_back( rRoot, nNewTab );
if( rDoc.IsActiveScenario( nNewTab ) )
nActive = static_cast<sal_uInt16>(nNewTab - nFirstTab);
nNewTab++;
}
}
ExcEScenarioManager::~ExcEScenarioManager()
{
}
void ExcEScenarioManager::SaveCont( XclExpStream& rStrm )
{
rStrm << static_cast<sal_uInt16>(aScenes.size()) // number of scenarios
<< nActive // active scen
<< nActive // last displayed
<< sal_uInt16(0); // reference areas
}
void ExcEScenarioManager::Save( XclExpStream& rStrm )
{
if( !aScenes.empty() )
ExcRecord::Save( rStrm );
for( ExcEScenario& rScenario : aScenes )
rScenario.Save( rStrm );
}
void ExcEScenarioManager::SaveXml( XclExpXmlStream& rStrm )
{
if( aScenes.empty() )
return;
sax_fastparser::FSHelperPtr& rWorkbook = rStrm.GetCurrentStream();
rWorkbook->startElement( XML_scenarios,
XML_current, OString::number( nActive ),
XML_show, OString::number( nActive )
// OOXTODO: XML_sqref
);
for( ExcEScenario& rScenario : aScenes )
rScenario.SaveXml( rStrm );
rWorkbook->endElement( XML_scenarios );
}
sal_uInt16 ExcEScenarioManager::GetNum() const
{
return 0x00AE;
}
std::size_t ExcEScenarioManager::GetLen() const
{
return 8;
}
namespace {
struct XclExpTabProtectOption
{
ScTableProtection::Option eOption;
sal_uInt16 nMask;
};
}
XclExpSheetProtectOptions::XclExpSheetProtectOptions( const XclExpRoot& rRoot, SCTAB nTab ) :
XclExpRecord( 0x0867, 23 )
{
static const XclExpTabProtectOption aTable[] =
{
{ ScTableProtection::OBJECTS, 0x0001 },
{ ScTableProtection::SCENARIOS, 0x0002 },
{ ScTableProtection::FORMAT_CELLS, 0x0004 },
{ ScTableProtection::FORMAT_COLUMNS, 0x0008 },
{ ScTableProtection::FORMAT_ROWS, 0x0010 },
{ ScTableProtection::INSERT_COLUMNS, 0x0020 },
{ ScTableProtection::INSERT_ROWS, 0x0040 },
{ ScTableProtection::INSERT_HYPERLINKS, 0x0080 },
{ ScTableProtection::DELETE_COLUMNS, 0x0100 },
{ ScTableProtection::DELETE_ROWS, 0x0200 },
{ ScTableProtection::SELECT_LOCKED_CELLS, 0x0400 },
{ ScTableProtection::SORT, 0x0800 },
{ ScTableProtection::AUTOFILTER, 0x1000 },
{ ScTableProtection::PIVOT_TABLES, 0x2000 },
{ ScTableProtection::SELECT_UNLOCKED_CELLS, 0x4000 },
{ ScTableProtection::NONE, 0x0000 }
};
mnOptions = 0x0000;
const ScTableProtection* pProtect = rRoot.GetDoc().GetTabProtection(nTab);
if (!pProtect)
return;
for (int i = 0; aTable[i].nMask != 0x0000; ++i)
{
if ( pProtect->isOptionEnabled(aTable[i].eOption) )
mnOptions |= aTable[i].nMask;
}
}
void XclExpSheetProtectOptions::WriteBody( XclExpStream& rStrm )
{
sal_uInt16 nBytes = 0x0867;
rStrm << nBytes;
for (int i = 0; i < 9; ++i)
rStrm << static_cast<unsigned char>(0);
nBytes = 0x0200;
rStrm << nBytes;
nBytes = 0x0100;
rStrm << nBytes;
nBytes = 0xFFFF;
rStrm << nBytes << nBytes;
rStrm << mnOptions;
nBytes = 0;
rStrm << nBytes;
}
XclExpSheetEnhancedProtection::XclExpSheetEnhancedProtection( const XclExpRoot& rRoot,
ScEnhancedProtection aProt ) :
XclExpRecord( 0x0868 ),
mrRoot( rRoot ),
maEnhancedProtection(std::move( aProt ))
{
}
void XclExpSheetEnhancedProtection::WriteBody( XclExpStream& rStrm )
{
sal_uInt16 const nRecordType = 0x0868;
rStrm << nRecordType; // frtHeader rt
rStrm.WriteZeroBytesToRecord(10); // frtHeader unused
rStrm << EXC_ISFPROTECTION; // isf
rStrm.WriteZeroBytesToRecord(5); // reserved1 (1 bytes) and reserved2 (4 bytes)
XclRangeList aRefs;
if (maEnhancedProtection.maRangeList.is())
mrRoot.GetAddressConverter().ConvertRangeList( aRefs, *maEnhancedProtection.maRangeList, false);
sal_uInt16 nCref = ulimit_cast<sal_uInt16>(aRefs.size());
rStrm << nCref; // cref
rStrm.WriteZeroBytesToRecord(6); // cbFeatData if EXC_ISFFEC2 (4 bytes) and reserved3 (2 bytes)
aRefs.Write( rStrm, true, nCref); // refs
// FeatProtection structure
rStrm << maEnhancedProtection.mnAreserved; // 1 bit A and 31 bits reserved
rStrm << maEnhancedProtection.mnPasswordVerifier; // wPassword
rStrm << XclExpString( maEnhancedProtection.maTitle); // stTitle
bool bSDContainer = ((maEnhancedProtection.mnAreserved & 0x00000001) == 0x00000001);
sal_uInt32 nCbSD = maEnhancedProtection.maSecurityDescriptor.size();
SAL_WARN_IF( bSDContainer && nCbSD < 20, "sc.filter",
"XclExpSheetEnhancedProtection A flag indicates container but cbSD < 20");
SAL_WARN_IF( !bSDContainer && nCbSD > 0, "sc.filter",
"XclExpSheetEnhancedProtection A flag indicates no container but cbSD > 0");
if (bSDContainer)
{
rStrm << nCbSD;
rStrm.Write( &maEnhancedProtection.maSecurityDescriptor.front(), nCbSD);
}
}
void XclCalccount::SaveCont( XclExpStream& rStrm )
{
rStrm << nCount;
}
XclCalccount::XclCalccount( const ScDocument& rDoc )
{
nCount = rDoc.GetDocOptions().GetIterCount();
}
sal_uInt16 XclCalccount::GetNum() const
{
return 0x000C;
}
std::size_t XclCalccount::GetLen() const
{
return 2;
}
void XclCalccount::SaveXml( XclExpXmlStream& rStrm )
{
rStrm.WriteAttributes(XML_iterateCount, OUString::number(nCount));
}
void XclIteration::SaveCont( XclExpStream& rStrm )
{
rStrm << nIter;
}
XclIteration::XclIteration( const ScDocument& rDoc )
{
nIter = rDoc.GetDocOptions().IsIter()? 1 : 0;
}
sal_uInt16 XclIteration::GetNum() const
{
return 0x0011;
}
std::size_t XclIteration::GetLen() const
{
return 2;
}
void XclIteration::SaveXml( XclExpXmlStream& rStrm )
{
rStrm.WriteAttributes(XML_iterate, ToPsz(nIter == 1));
}
void XclDelta::SaveCont( XclExpStream& rStrm )
{
rStrm << fDelta;
}
XclDelta::XclDelta( const ScDocument& rDoc )
{
fDelta = rDoc.GetDocOptions().GetIterEps();
}
sal_uInt16 XclDelta::GetNum() const
{
return 0x0010;
}
std::size_t XclDelta::GetLen() const
{
return 8;
}
void XclDelta::SaveXml( XclExpXmlStream& rStrm )
{
rStrm.WriteAttributes(XML_iterateDelta, OUString::number(fDelta));
}
XclExpFileEncryption::XclExpFileEncryption( const XclExpRoot& rRoot ) :
XclExpRecord(0x002F, 54),
mrRoot(rRoot)
{
}
XclExpFileEncryption::~XclExpFileEncryption()
{
}
void XclExpFileEncryption::WriteBody( XclExpStream& rStrm )
{
// 0x0000 - neither standard nor strong encryption
// 0x0001 - standard or strong encryption
rStrm << static_cast<sal_uInt16>(0x0001);
// 0x0000 - non standard encryption
// 0x0001 - standard encryption
sal_uInt16 nStdEnc = 0x0001;
rStrm << nStdEnc << nStdEnc;
sal_uInt8 pnDocId[16];
sal_uInt8 pnSalt[16];
sal_uInt8 pnSaltHash[16];
XclExpEncrypterRef xEnc = std::make_shared<XclExpBiff8Encrypter>(mrRoot);
xEnc->GetDocId(pnDocId);
xEnc->GetSalt(pnSalt);
xEnc->GetSaltDigest(pnSaltHash);
rStrm.Write(pnDocId, 16);
rStrm.Write(pnSalt, 16);
rStrm.Write(pnSaltHash, 16);
rStrm.SetEncrypter(xEnc);
}
XclExpInterfaceHdr::XclExpInterfaceHdr( sal_uInt16 nCodePage ) :
XclExpUInt16Record( EXC_ID_INTERFACEHDR, nCodePage )
{
}
void XclExpInterfaceHdr::WriteBody( XclExpStream& rStrm )
{
rStrm.DisableEncryption();
rStrm << GetValue();
}
XclExpInterfaceEnd::XclExpInterfaceEnd() :
XclExpRecord(0x00E2, 0) {}
XclExpInterfaceEnd::~XclExpInterfaceEnd() {}
void XclExpInterfaceEnd::WriteBody( XclExpStream& rStrm )
{
// Don't forget to re-enable encryption.
rStrm.EnableEncryption();
}
XclExpWriteAccess::XclExpWriteAccess() :
XclExpRecord(0x005C, 112)
{
}
XclExpWriteAccess::~XclExpWriteAccess()
{
}
void XclExpWriteAccess::WriteBody( XclExpStream& rStrm )
{
static const sal_uInt8 aData[] = {
0x04, 0x00, 0x00, 'C', 'a', 'l', 'c', 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 };
for (std::size_t i = 0; i < sizeof(aData); ++i)
rStrm << aData[i];
}
XclExpFileSharing::XclExpFileSharing( const XclExpRoot& rRoot, sal_uInt16 nPasswordHash, bool bRecommendReadOnly ) :
XclExpRecord( EXC_ID_FILESHARING ),
mnPasswordHash( nPasswordHash ),
mbRecommendReadOnly( bRecommendReadOnly )
{
if( rRoot.GetBiff() <= EXC_BIFF5 )
maUserName.AssignByte( rRoot.GetUserName(), rRoot.GetTextEncoding(), XclStrFlags::EightBitLength );
else
maUserName.Assign( rRoot.GetUserName() );
}
void XclExpFileSharing::Save( XclExpStream& rStrm )
{
if( (mnPasswordHash != 0) || mbRecommendReadOnly )
XclExpRecord::Save( rStrm );
}
void XclExpFileSharing::WriteBody( XclExpStream& rStrm )
{
rStrm << sal_uInt16( mbRecommendReadOnly ? 1 : 0 ) << mnPasswordHash << maUserName;
}
XclExpProt4Rev::XclExpProt4Rev() :
XclExpRecord(0x01AF, 2)
{
}
XclExpProt4Rev::~XclExpProt4Rev()
{
}
void XclExpProt4Rev::WriteBody( XclExpStream& rStrm )
{
rStrm << static_cast<sal_uInt16>(0x0000);
}
XclExpProt4RevPass::XclExpProt4RevPass() :
XclExpRecord(0x01BC, 2)
{
}
XclExpProt4RevPass::~XclExpProt4RevPass()
{
}
void XclExpProt4RevPass::WriteBody( XclExpStream& rStrm )
{
rStrm << static_cast<sal_uInt16>(0x0000);
}
const sal_uInt8 nDataRecalcId[] = {
0xC1, 0x01, 0x00, 0x00, 0x54, 0x8D, 0x01, 0x00
};
XclExpRecalcId::XclExpRecalcId() :
XclExpDummyRecord(0x01C1, nDataRecalcId, sizeof(nDataRecalcId))
{
}
const sal_uInt8 nDataBookExt[] = {
0x63, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02
};
XclExpBookExt::XclExpBookExt() :
XclExpDummyRecord(0x0863, nDataBookExt, sizeof(nDataBookExt))
{
}
XclRefmode::XclRefmode( const ScDocument& rDoc ) :
XclExpBoolRecord( 0x000F, rDoc.GetAddressConvention() != formula::FormulaGrammar::CONV_XL_R1C1 )
{
}
void XclRefmode::SaveXml( XclExpXmlStream& rStrm )
{
rStrm.WriteAttributes(XML_refMode, GetBool() ? "A1" : "R1C1");
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V530 The return value of function 'AddSdrObject' is required to be utilized.
↑ V1029 Numeric Truncation Error. Return value of the 'size' function is written to the 16-bit variable.
↑ V1048 The 'nHorAlign' variable was assigned the same value.
↑ V1048 The 'nVerAlign' variable was assigned the same value.